Enhancement of Thermal Properties of Polyvinylpyrrolidone (PVP)-Coated Silver Nanoparticles by Using Plasmid DNA and their Localized Surface Plasmon Resonance (LSPR) Characteristics

In this paper, the enhancement of thermal properties of polymer-coated silver nanoparticles by the addition of plasmid DNA is described. Nanoparticles of noble metals such as gold and silver possess specific characteristics by virtue of their quantum size effects. Therefore, noble metal nanoparticles are used for chemical sensing and biosensing applications based on their localized surface plasmon resonance absorption that can be measured in the visible region. The polyvinylpyrrolidone (PVP)-coated noble metal nanoparticles, in particular, with high dispersion ability in water, offer several advantages for sensing applications. However, some difficulties are encountered in the use of these PVP-coated noble metal nanoparticles for sensing applications due to their poor thermal properties. To improve the thermal properties of PVP-coated noble metal nanoparticles, we found that the addition of plasmid DNA to PVP-coated silver nanoparticles enhances their thermal properties due to good thermal stability of DNA. The introduction of plasmid DNA into PVP-coated silver nanoparticle dispersion enhanced the thermal properties through the formation of a complex between the nanoparticles and plasmid DNA. Furthermore, other polymers such as proteins and polyethylene glycol did not enhance the thermal properties of PVP-coated silver nanoparticles. Thus, the PVP-coated silver nanoparticle–plasmid DNA complex with enhanced thermal properties has a great potential for use in medical and drug delivery applications.     

Ion-specific aggregation of gold-DNA nanoparticles using the dG quartet hairpin 5'-d(G4T4G4)

Ion-selective self-assembly of Au nanoparticles is described. The Oxytricha telomere DNA hairpin 5'-d(G4T4G4) immobilized on 13-nm Au nanoparticles forms a supramolecular assembly via dG-quartets, as determined by the color change and by scanning electron microscopy (SEM). The aggregation is ion-dependent and selective for Na+ ions. K+ is less efficient, while Li+ and Cs+ do not drive the aggregation. This work is the first effort to explore the use of secondary structures of DNA (quadruplexes) for producing self-assemblies of Au nanoparticles. It can be utilized to generate novel devices and materials, potentially useful for sensing and other applications in medicinal or engineering science.     

From DNA biosensors to gene chips

Wide-scale DNA testing requires the development of small, fast and easy-to-use devices. This article describes the preparation, operation and applications of biosensors and gene chips, which provide fast, sensitive and selective detection of DNA hybridization. Various new strategies for DNA biosensors and gene chips are examined, along with recent trends and future directions. The integration of hybridization detection schemes with the sample preparation process in a ‘Lab-on-a-Chip’ format is also covered. While the use of DNA biosensors and gene chips is at an early stage, such devices are expected to have an enormous effect on future DNA diagnostics.     

Recent advances in exploiting ionic liquids for biomolecules: Solubility,stability and applications

The technological utility of biomolecules (e.g. proteins, enzymes and DNA) can be significantly enhanced by combining them with ionic liquids (ILs) – potentially attractive ”green“ and ”designer“ solvents – rather than using in conventional organic solvents or water. In recent years, ILs have been used as solvents, cosolvents, and reagents for biocatalysis, biotransformation, protein preservation and stabilization, DNA solubilization and stabilization, and other biomolecule‐based applications. Using ILs can dramatically enhance the structural and chemical stability of proteins, DNA, and enzymes. This article reviews the recent technological developments of ILs in protein‐, enzyme‐, and DNA‐based applications. We discuss the different routes to increase biomolecule stability and activity in ILs, and the design of biomolecule‐friendly ILs that can dissolve biomolecules with minimum alteration to their structure. This information will be helpful to design IL‐based processes in biotechnology and the biological sciences that can serve as novel and selective processes for enzymatic reactions, protein and DNA stability, and other biomolecule‐based applications.     

Stable isotope probing - linking microbial identity to function

Stable isotope probing (SIP) is a technique that is used to identify the microorganisms in environmental samples that use a particular growth substrate. The method relies on the incorporation of a substrate that is highly enriched in a stable isotope, such as (13)C, and the identification of active microorganisms by the selective recovery and analysis of isotope-enriched cellular components. DNA and rRNA are the most informative taxonomic biomarkers and (13)C-labelled molecules can be purified from unlabelled nucleic acid by density-gradient centrifugation. The future holds great promise for SIP, particularly when combined with other emerging technologies such as microarrays and metagenomics.     

Generic technique to generate large branched DNA complexes

The inherent self-recognition properties of DNA have led to its use as a scaffold for various nanotechnology self-assembly applications, with macromolecular complexes, metallic and semiconducting nanoparticles, proteins, inter alia, being assembled onto a designed DNA scaffold. Such structures may typically comprise a number of DNA molecules organized into macromolecules. Many studies have used synthetic methods to produce the constituent DNA molecules, but this typically constrains the molecules to be no longer than around 100 base pairs (30 nm). However, applications that require larger self-assembling DNA complexes, several tens of nanometers or more, need to be generated by other techniques. Here, we present a generic technique to generate large linear, branched, and/or circular DNA macromolecular complexes. The effectiveness of this technique is demonstrated here by the use of Lambda Bacteriophage DNA as a template to generate single- and double-branched DNA structures approximately 120 nm in size.     

Electrochemical biosensing with nanoparticles

This minireview looks at the latest trends in the use of nanoparticles (NPs) in electrochemical biosensing systems. It includes electrochemical characterization of NPs for use as labels in affinity biosensors and other applications. DNA analysis involving NPs is one of the most important topics of current research in bionanotechnology. The advantages of the use of NPs in designing novel electrochemical sensors for DNA analysis are reviewed. Electrochemical NPs can also be used in designing immunoassays, offering the possibility of easy, low cost and simultaneous detection of several proteins. Research into NP applications in electrochemical analysis is in its infancy. Several aspects related to sensitivity as well integration of all the assay steps into a single one need to be improved.     

Suicide polymerase endonuclease restriction, a novel technique for enhancing PCR amplification of minor DNA templates

PCR-based molecular analyses can be hindered by the presence of unwanted or dominant DNA templates that reduce or eliminate detection of alternate templates. We describe here a reaction in which such templates can be exclusively digested by endonuclease restriction, leaving all other DNAs unmodified. After such a modification, the digested template is no longer available for PCR amplification, while nontarget DNAs remain intact and can be amplified. We demonstrate the application of this method and use denaturing gradient gel electrophoresis to ascertain the removal of target DNA templates and the subsequent enhanced amplification of nondigested DNAs. Specifically, plastid 16S rRNA genes were exclusively digested from environmental DNA extracted from plant roots. In addition, pure culture and environmental DNA extracts were spiked with various amounts of genomic DNA extracted from Streptomyces spp., and selective restriction of the Streptomyces 16S rRNA genes via the suicide polymerase endonuclease restriction PCR method was employed to remove the amended DNA.     

Peptide nucleic acids: deoxyribonucleic acid mimics with a peptide backbone

This tutorial briefly describes a new class of synthetic biopolymer, which is referred to as peptide nucleic acid (PNA). In PNA, individual nucleobases are linked to an achiral neutral peptide backbone. PNA exhibits the hybridization characteristic (e.g., Watson—Crick duplex formation) of DNA. The achiral peptide backbone provides similar interbase distances as natural DNA, and adequate flexibility to permit base pair interactions with complementary RNA or DNA strands. Several potential applications of PNA oligomers in biotechnology are suggested. These include the use of PNAs as a probe for specific recognition of a DNA or RNA sequence selective, purification of nucleic acids via designed high affinity binding to PNA, screening for DNA mutations, and as possible therapeutic agents.     

Surface manipulation of biomolecules for cell microarray applications

Many biological events, such as cellular communication, antigen recognition, tissue repair and DNA linear transfer, are intimately associated with biomolecule interactions at the solid-liquid interface. To facilitate the study and use of these biological events for biodevice and biomaterial applications, a sound understanding of how biomolecules behave at interfaces and a concomitant ability to manipulate biomolecules spatially and temporally at surfaces is required. This is particularly true for cell microarray applications, where a range of biological processes must be duly controlled to maximize the efficiency and throughput of these devices. Of particular interest are transfected-cell microarrays (TCMs), which significantly widen the scope of microarray genomic analysis by enabling the high-throughput analysis of gene function within living cells. This article reviews this current research focus, discussing fundamental and applied research into the spatial and temporal surface manipulation of DNA, proteins and other biomolecules and the implications of this work for TCMs.     

3' deoxycytidine, like hydroxyurea, inhibits DNA synthesis without preventing the initiation of the cell cycle

3' Deoxycytidine, the cytidine analogue of cordycepin and selective inhibitor of pre-ribosomal RNA in HeLa cells, has been found to be a reversible inhibitor of DNA replication in RNA accumulation. Like other inhibitors of DNA replication such as hydroxyurea, it does not prevent serum-stimulated quiescent 3T3 cells from undergoing the random transition which is rate-limiting for entry into S phase.     

Magnetic bead-based solid phase for selective extraction of genomic DNA

Magnetic bead-based solid phases are widely used for the separation of nucleic acids from complex mixtures. The challenge to selectively separate specific DNA molecules (via complementary hybridization) in a single step is the selection of a linker between the capture probe and the solid support that can be exposed to high temperatures in the presence of a high salt media. This article presents a general platform for the fabrication of a magnetic bead-based selective solid phase that can be used for subtractive hybridization or sequence capture applications. Phosphorus dendrimers are used for the first time as linkers in a magnetic bead-based selective solid phase for capture of genomic DNA. Aside from providing a high loading capacity, they render a stable bond between the capture probe and the surface under the high temperature and salt conditions required for denaturation and capture to proceed in a single step. The thermal stability of the solid phase under these conditions is first demonstrated by hybridizing a Cy3-labeled target. The selective capture of DNA targets in a single step is then demonstrated by subtractive hybridization of fragmented human genomic DNA. The specificity and selectivity of the solid phase are demonstrated by the recovery of adenovirus serotype 4 DNA spiked into the human DNA target. The effect of steric and electrostatic constraints was also investigated by using dendrimers of different generations that vary in their size and the number of branches. The results demonstrate that this platform can be used for single-step subtractive hybridization applications with better performance over the conventional two-step method using streptavidin-coated magnetic beads.     

An efficient laboratory made apparatus for DNA amplification

DNA amplification by the polymerase chain reaction (PCR) is a method capable of producing a selective and very high enrichment of a specific DNA sequence. Hence it seems to be useful in various fields from basic research to clinical applications. In order to automatize PCR we assembled for a very low cost a mechanical system designed to carry a test tube holder successively in three thermal baths set at the required temperatures for the reaction. Two examples of the use of this machine are given: (i) amplification of DNA of a particular subtype of acute intermittent porphyria; (ii) the detection of the chimeric c-abl/bcr message found in chronic myelogenous leukemia cells.     

New highly sensitive and selective catalytic DNA biosensors for metal ions

While remarkable progress has been made in developing sensors for metal ions such as Ca(II) and Zn(II), designing and synthesizing sensitive and selective metal ion sensors remains a significant challenge. Perhaps the biggest challenge is the design and synthesis of a sensor capable of specific and strong metal binding. Since our knowledge about the construction of metal-binding sites in general is limited, searching for sensors in a combinatorial way is of significant value. Therefore, we have been able to use a combinatorial method called in vitro selection to obtain catalytic DNA that can bind a metal ion of choice strongly and specifically. The metal ion selectivity of the catalytic DNA was further improved using a 'negative selection' strategy where catalytic DNA that are selective for competing metal ions are discarded in the in vitro selection processes. By labeling the resulting catalytic DNA with a fluorophore/quencher pair, we have made a new class of metal ion fluorescent sensors that are the first examples of catalytic DNA biosensors for metal ions. The sensors combine the high selectivity of catalytic DNA with the high sensitivity of fluorescent detection, and can be applied to the quantitative detection of metal ions over a wide concentration range and with high selectivity. The use of DNA sensors in detection and quantification of lead ions in environmental samples such as water from Lake Michigan has been demonstrated. DNA is stable, cost-effective, environmentally benign, and easily adaptable to optical fiber and microarray technology for device manufacture. Thus, the DNA sensors explained here hold great promise for on-site and real-time monitoring of metal ions in the fields of environmental monitoring, developmental biology, clinical toxicology, wastewater treatment, and industrial process monitoring.     

Suicide Polymerase Endonuclease Restriction, a Novel Technique for Enhancing PCR Amplification of Minor DNA Templates

PCR-based molecular analyses can be hindered by the presence of unwanted or dominant DNA templates that reduce or eliminate detection of alternate templates. We describe here a reaction in which such templates can be exclusively digested by endonuclease restriction, leaving all other DNAs unmodified. After such a modification, the digested template is no longer available for PCR amplification, while nontarget DNAs remain intact and can be amplified. We demonstrate the application of this method and use denaturing gradient gel electrophoresis to ascertain the removal of target DNA templates and the subsequent enhanced amplification of nondigested DNAs. Specifically, plastid 16S rRNA genes were exclusively digested from environmental DNA extracted from plant roots. In addition, pure culture and environmental DNA extracts were spiked with various amounts of genomic DNA extracted from Streptomyces spp., and selective restriction of the Streptomyces 16S rRNA genes via the suicide polymerase endonuclease restriction PCR method was employed to remove the amended DNA.     

Display of proteins on bacteria

Display of heterologous proteins on the surface of microorganisms, enabled by means of recombinant DNA technology, has become an increasingly used strategy in various applications in microbiology, biotechnology and vaccinology. Gram-negative, Gram-positive bacteria, viruses and phages are all being investigated in such applications. This review will focus on the bacterial display systems and applications. Live bacterial vaccine delivery vehicles are being developed through the surface display of foreign antigens on the bacterial surfaces. In this field, 'second generation' vaccine delivery vehicles are at present being generated by the addition of mucosal targeting signals, through co-display of adhesins, in order to achieve targeting of the live bacteria to immunoreactive sites to thereby increase immune responses. Engineered bacteria are further being evaluated as novel microbial biocatalysts with heterologous enzymes immobilized as surface exposed on the bacterial cell surface. A discussion has started whether bacteria can find use as new types of whole-cell diagnostic devices since single-chain antibodies and other type of tailor-made binding proteins can be displayed on bacteria. Bacteria with increased binding capacity for certain metal ions can be created and potential environmental or biosensor applications for such recombinant bacteria as biosorbents are being discussed. Certain bacteria have also been employed for display of various poly-peptide libraries for use as devices in in vitro selection applications. Through various selection principles, individual clones with desired properties can be selected from such libraries. This article explains the basic principles of the different bacterial display systems, and discusses current uses and possible future trends of these emerging technologies.     

Automated band mapping in electrophoretic gel images using background information

Some popular methods for polymorphism and mutation discovery involve ascertainment of novel bands by the examination of electrophoretic gel images. Although existing strategies for mapping bands work well for specific applications, such as DNA sequencing, these strategies are not well suited for novel band detection. Here, we describe a general strategy for band mapping that uses background banding patterns to facilitate lane calling and size calibration. We have implemented this strategy in GelBuddy, a user-friendly Java-based program for PC and Macintosh computers, which includes several utilities to assist discovery of mutations and polymorphisms. We demonstrate the use of GelBuddy in applications based on single-base mismatch cleavage of heteroduplexed PCR products. Use of software designed to facilitate novel band detection can significantly shorten the time needed for image analysis and data entry in a high-throughput setting. Furthermore, the interactive strategy implemented in GelBuddy has been successfully applied to DNA fingerprinting applications, such as AFLP. GelBuddy promises to make electrophoretic gel analysis a viable alternative to DNA resequencing for discovery of mutations and polymorphisms.     

Genome-wide analysis of barcoded Saccharomyces cerevisiae gene-deletion mutants in pooled cultures

The availability of a near-complete (96%) collection of gene-deletion mutants in Saccharomyces cerevisiae greatly facilitates the systematic analyses of gene function in yeast. The unique 20 bp DNA 'barcodes' or 'tags' in each deletion strain enable the individual fitness of thousands of deletion mutants to be resolved from a single pooled culture. Here, we present protocols for the study of pooled cultures of tagged yeast deletion mutants with a tag microarray. This process involves five main steps: pooled growth, isolation of genomic DNA, PCR amplification of the barcodes, array hybridization and data analysis. Pooled deletion screening can be used to study gene function, uncover a compound's mode of action and identify drug targets. In addition to these applications, the general method of studying pooled samples with barcode arrays can also be adapted for use with other types of samples, such as mutant collections in other organisms, short interfering RNA vectors and molecular inversion probes.     

Protection of DNA during early development: adaptations and evolutionary consequences

The rapidly dividing cleavage stages of embryos do not have the typical responses to cell damage, such as induction of the heat shock response, use of mitotic checkpoints, or use of apoptosis to eliminate severely damaged cells. This could create problems with integrity of DNA, but the solution in these embryos appears to be a "be prepared" approach, in which specific adaptations are used to minimize DNA damage during cleavage and the use of apoptosis at the mid-blastula transition to remove any cells that were nevertheless damaged. It has been assumed that this approach has evolved because of the advantage of rapid production of a motile larvae. Alternatively, this particular approach may have the selective advantage of increasing mutation rate when there are greater environmental stresses. This could provide more variants on which selective pressures could act and thus accelerate evolution during environmentally stressful periods.