抗VEGF单克隆抗体Fab片段在E.coli中的分泌表达

目的：在大肠杆菌中构建、表达和纯化抗血管内皮生长因子（VEGF）的Fab片段（兰尼单抗,ranibizumab）,通过发酵条件的控制实现其在大肠杆菌周质和胞外的高效分泌表达,并检测其抗VEGF的活性。方法：以pET30a为质粒载体,构建了Fd链和L链前都含有OmpA信号肽、SD序列和T7 promoter的克隆载体pET30a（+）-LC-HC,转化BL21（DE3）表达菌株,并进行了培养基、温度和IPTG诱导浓度的条件优化。结果：确定Fab片段在大肠杆菌分泌表达摇瓶发酵最佳条件为：在含有1.5% Tryptone,1% Yeast Extract,0.5% Glucose,0.15% NaCl,0.1% NH₄Cl,0.08% MgCl₂·6H₂O的1L培养基的摇瓶中,按照10%的接种量,37℃摇床培养至对数生长后期（OD₆₀₀为2左右）,添加0.1mmol/L IPTG诱导剂,于16℃条件下诱导表达过夜（16h左右）。用周质破菌提取分泌至大肠杆菌周质腔的Fab片段,同时用中空纤维柱浓缩发酵培养基,最后用ProteinG亲和层析柱一步纯化洗脱,经SDS-PAGE检测分析和Brandford法测蛋白浓度得出纯化的Fab抗体片段纯度在90%以上,分泌表达纯化量为0.4mg/L。以VEGF165作为结合抗原,间接ELISA分析纯化后的Fab抗体EC50=30ng/ml。继续用该培养基在3.7L体积发酵罐中进行2L体积的发酵,获得最终的菌体产率为30g/L,可亲和纯化Fab抗体量为1.94mg/L。结论：成功实现了Fab抗体片段在大肠杆菌中的高效分泌表达,且具有很高的活性,为规模化制备Fab抗体片段提供了研究依据。     

Directed evolution of an anti-human red blood cell antibody

We have earlier described a haemagglutination-based assay for on-site detection of antibodies to HIV using whole blood. The reagent in this assay comprises of monovalent Fab fragment of an anti-human RBC antibody fused to immunodominant antigens of HIV-1 and HIV-2. In the present work, we describe a rational and systematic method for directed evolution of scFv and Fab antihuman RBC antibody fragments. Based on homology modeling and germline sequence alignments of antibodies, target residues in the anti-RBC MAb B6 sequence were identified for mutagenesis. A combinatorial library of 10⁷ clones was constructed and subjected to selection on whole RBC under competitive binding conditions to identify several phage-displayed B6 scFv clones with improved binding as determined in an agglutination assay. Selected V_L and V_H sequences were shuffled to generate a second generation phage-displayed Fab library which on panning yielded Fab clones with several fold better binding than wild type. The mutants with better binding also displayed more Fab molecules per phage particle indicating improved in vivo folding which was also confirmed by their increased periplasmic secretion compared to the wild type. The mutant Fab molecules also showed superior characteristics in large scale production by in vitro folding of LC and Fd. The biophysical measurements involving thermal and chemical denaturation and renaturation kinetics clearly showed that two of the mutant Fab molecules possessed significantly improved characteristics as compared to the wild type B6 Fab. Structural modelling revealed that B6 Fab mutants had increased hydrogen bonding resulting in increased stability. Our approach provides a novel and useful strategy to obtain recombinant antibodies with improved characteristics.Key words: phage display, antibody maturation, Fab, antibody folding, scFv, agglutination     

Directed evolution of an anti-human red blood cell antibody

We have earlier described a haemagglutination-based assay for on-site detection of antibodies to HIV using whole blood. The reagent in this assay comprises of monovalent Fab fragment of an anti-human RBC antibody fused to immunodominant antigens of HIV-1 and HIV-2. In the present work, we describe a rational and systematic method for directed evolution of scFv and Fab anti-human RBC antibody fragments. Based on homology modeling and germline sequence alignments of antibodies, target residues in the anti-RBC MAb B6 sequence were identified for mutagenesis. A combinatorial library of 107 clones was constructed and subjected to selection on whole RBC under competitive binding conditions to identify several phage-displayed B6 scFv clones with improved binding as determined in an agglutination assay. Selected VL and VH sequences were shuffled to generate a second generation phage-displayed Fab library which on panning yielded Fab clones with several fold better binding than wild type. The mutants with better binding also displayed more Fab molecules per phage particle indicating improved in vivo folding which was also confirmed by their increased periplasmic secretion compared to the wild type. The mutant Fab molecules also showed superior characteristics in large scale production by in vitro folding of LC and Fd. The biophysical measurements involving thermal and chemical denaturation and renaturation kinetics clearly showed that two of the mutant Fab molecules possessed significantly improved characteristics as compared to the wild type B6 Fab. Structural modelling revealed that B6 Fab mutants had increased hydrogen bonding resulting in increased stability. Our approach provides a novel and useful strategy to obtain recombinant antibodies with improved characteristics.     

Characterization and binding of intracellular antibody fragments to the hepatitis C virus core protein.

The monoclonal antibody C7-50 binds to the HCV core protein with high sensitivity and specificity. The coding sequences of the variable domains of the antibody were determined following cDNA cloning of the Fab and sFv fragments. Subsequently, intracellular expression and binding of these antibody fragments to the HCV core protein as a potential antiviral approach were studied. There was high specificity and sensitivity of binding of bacterially expressed, recombinant C7-50 Fab to HCV core as measured by EIA and immunoblot. For expression in mammalian cells, the C7-50 antibody was subcloned in the sFv format by the introduction of a (Gly(4)Ser)(3) linker spaced between light and heavy chains. Northern and Western blot analysis as well as confocal microscopy established the targeted expression of the C7-50 sFv antibody fragment in the endoplasmic reticulum of transfected cells. The colocalization and intracellular binding of the antibody fragment to HCV core protein was confirmed by immunoprecipitation and subsequent immunoblot analysis. This study demonstrates that gene delivery of cDNA coding sequences inducing intracellular expression of C7-50 antibody fragments leads to binding of the antibody fragment to the HCV core protein within the secretory compartment of transfected cells. Intracellular immunization represents a promising antiviral approach to interfere with the life cycle of HCV.     

Expression of a Chlamydia anticarbohydrate single-chain antibody as a maltose binding fusion protein.

A single-chain antibody fragment has been constructed for an antibody that binds to the Chlamydia specific carbohydrate structure of the lipopolysaccharide. Single-chain protein was expressed and secreted into the periplasmic space of E. coli as a fusion protein with the maltose binding protein. The fusion protein was purified in one step by virtue of its ability to bind to maltose. In a sandwich ELISA, the eluted protein bound Chlamydia lipopolysaccharide, which demonstrates that the single-chain protein domain will function as part of a fusion protein. The expression of maltose binding fusion proteins into the periplasmic space could be used for production of other single-chain antibodies or protein fragments requiring appropriate folding and disulfide bond formation.     

Crystallization of an anti-2,2,6,6-tetramethyl-1-piperidinyloxy-dinitrophenyl monoclonal antibody Fab fragment with and without bound hapten

The Fab fragment of a monoclonal antibody, AN02, specific for a 2,2,6,6-tetramethyl-1-piperidinyloxy-dinitrophenyl hapten was crystallized both with and without bound hapten. Both crystals formed in phosphate-buffered saline (150 mM-NaCl, 10 mM-Na2PO4, 0.02% (w/v) NaN3 (pH 7.4) at 4 degrees C and diffracted beyond 2.2 A resolution (1A = 0.1 nm). Fab with bound hapten crystallizes in space group P6(1)22 or P6(5)22, with cell dimensions a = b = 73.23 A, c = 373.8 A, alpha = beta = 90 degrees and gamma = 120 degrees. Unoccupied Fab also crystallizes in space group P6(1)22 or P6(5)22 with cell dimensions a = b = 73 A, c = 377 A, alpha = beta = 90 degrees and gamma = 120 degrees.     

Two routes for production and purification of Fab fragments in biopharmaceutical discovery research: Papain digestion of mAb and transient expression in mammalian cells

Fab (fragment that having the antigen binding site) of a monoclonal antibody (mAb) is widely required in biopharmaceutical research and development. At Centocor, two routes of Fab production and purification were used to enable a variety of research and development efforts, particularly, crystallographic studies of antibody–antigen interactions. One route utilizes papain digestion of an intact monoclonal antibody for Fab fragment production. After digestion, separation of the Fab fragment from the Fc (fragment that crystallizes) and residual intact antibody was achieved using protein A affinity chromatography. In another route, His-tagged Fab fragments were obtained by transient expression of an appropriate construct in mammalian cells, and typical yields are 1–20 mg of Fab fragment per liter of cell culture. The His-tagged Fab fragments were first captured using immobilized metal affinity chromatography (IMAC). To provide high quality protein sample for crystallization, Fabs from either proteolytic digestion or from direct expression were further purified using size-exclusion chromatography (SEC) and/or ion-exchange chromatography (IEC). The purified Fab fragments were characterized by mass spectrometry, SDS–PAGE, dynamic light scattering, and circular dichroism. Crystallization experiments demonstrated that the Fab fragments are of high quality to produce diffraction quality crystals suitable for X-ray crystallographic analysis.     

Transport of heterologous proteins to the periplasmic space of <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> using a variety of native signal sequences

Bacterial expression of recombinant proteins containing disulfide bonds is facilitated by transport of the proteins to the periplasmic space. Several Pseudomonas fluorescens signal sequences have been identified that efficiently direct proteins to the periplasm and provide solubility and yield advantages over the production of proteins fused to the PelB signal sequence in E. coli. For a single chain antibody fragment, the final yield varied from about 1 g/l to 10 g/l when expression in P. fluorescens involved fusion to various P. fluorescens signal sequences.     

Expression of aChlamydia anticarbohydrate single-chain antibody as a maltose binding fusion protein

A single-chain antibody fragment has been constructed for an antibody that binds to theChlamydia specific carbohydrate structure of the lipopolysaccharide. Single-chain protein was expressed and secreted into the periplasmic space ofE. coli as a fusion protein with the maltose binding protein. The fusion protein was purified in one step by virtue of its ability to bind to maltose. In a sandwich ELISA, the eluted protein boundChlamydia lipopolysaccharide, which demonstrates that the single-chain protein domain will function as part of a fusion protein. The expression of maltose binding fusion proteins into the periplasmic space could be used for production of other single-chain antibodies or protein fragments requiring appropriate folding and disulfide bond formation.     

Production of correctly folded Fab antibody fragment in the cytoplasm of Escherichia coli trxB gor mutants via the coexpression of molecular chaperones.

Disulfide bonds are normally formed after a polypeptide has been exported from the reducing environment of the cytoplasm into a more oxidizing compartment, such as the bacterial periplasm. Recently, we showed that in Escherichia coli trxB gor mutants, in which the reduction of thioredoxin and glutathione is impaired, the redox potential of the cytoplasm becomes comparable to that of the mammalian endoplasmic reticulum, thus allowing the formation of disulfide bonds in certain complex proteins (P. H. Bessette et al., 1999, Proc. Natl. Acad. Sci. USA 96, 13703-13708]. Here, we investigate the expression of a Fab antibody fragment in the bacterial cytoplasm. The effect of coexpressing cytoplasmic chaperones (GroEL/ES, trigger factor, DnaK/J), as well as signal sequenceless versions of periplasmic chaperones (DsbC and Skp), was examined. Skp coexpression was shown to have the most significant effect (five- to sixfold increase) on the yield of correctly folded Fab. A maximum yield of 0.8 mg Fab/L/OD(600) Fab was obtained, indicating that cytoplasmic expression may be a viable alternative for the preparative production of antibody fragments.     

Characterization of crystals of an Fab fragment of a murine monoclonal antibody.

The Fab fragment of an antibody, made against an E2-specific feline infectious peritonitis virus neutralizing antibody, has been crystallized in a form suitable for X-ray diffraction analysis from PEG 4000 using vapor diffusion methods. The Fab fragment crystals diffract to about 2.9 A resolution and are of triclinic space group P1. Unit cell dimensions, by which the reciprocal lattice can be indexed, are a = 57.16 A, b = 70.85 A, c = 75.81 A, alpha = 85.11 degrees, beta = 121.28 degrees and gamma = 116.33 degrees. There are two Fab fragments comprising the asymmetric unit of the crystals. The presence of a pseudo-mirror plane in the diffraction pattern suggests the presence of at least an approximate dyad axis relating the two Fab fragments within the asymmetric unit.     

Functional expression of recombinant human stefin A in mammalian and bacterial cells

Recombinant human cysteine protease inhibitor, stefin A, was expressed in both Escherichia coli and BS-C-1 monkey kidney cells utilizing pET and recombinant vaccinia virus systems, respectively. The expressed protein was purified and analyzed by SDS-PAGE and Western blot analysis utilizing a polyclonal antibody against rat cystatin alpha. In both cases the purified protein appeared as a single band corresponding to the molecular weight of stefin A ( approximately 10kDa). Viability of the expressed stefin A was determined by the inhibition of the plant cysteine protease, papain. Recombinant human stefin A expressed in both E. coli and BS-C-1 cells, was shown to almost completely inhibit papain. The expression of a fully functional recombinant human stefin A in the bacterial system provides a highly efficient tool for the production of large quantities of the protein. This can be an important tool in kinetic studies as well as in production of antibodies for other analytical studies (immunoblot, immunohistochemical studies, etc.). Expression in the mammalian cells, on the other hand, can provide a significant research tool to study the functional roles of stefin A in mammalian systems such as regulation of cysteine proteases.     

Crystallization and preliminary X-ray studies of the VL domain of the antibody McPC603 produced in Escherichia coli

The VL domain, obtained from a recombinant Fv fragment of the antibody McPC603 expressed in Escherichia coli, has been crystallized as a dimer from 2 M-(NH4)2SO4 (pH 4.0). The crystals are hexagonal, space group P6(1)22. The cell dimensions are a = b = 86.48 A, c = 76.64 A, with a VL monomer as the asymmetric unit. The crystals diffract to 2.0 A. The structure was solved by Patterson search using the VL domain of the Fab fragment of McPC603 and the VL dimer REI.     

Crystal structure of an in vitro affinity- and specificity-matured anti-testosterone Fab in complex with testosterone. Improved affinity results from small structural changes within the variable domains

A highly selective, high affinity recombinant anti-testosterone Fab fragment has been generated by stepwise optimization of the complementarity-determining regions (CDRs) by random mutagenesis and phage display selection of a monoclonal antibody (3-C(4)F(5)). The best mutant (77 Fab) was obtained by evaluating the additivity effects of different independently selected CDR mutations. The 77 Fab contains 20 mutations and has about 40-fold increased affinity (K(d) = 3 x 10(-10) m) when compared with the wild-type (3-C(4)F(5)) Fab. To obtain structural insight into factors, which are needed to improve binding properties, we have determined the crystal structures of the mutant 77 Fab fragment with (2.15 A) and without testosterone (2.10 A) and compared these with previously determined wild-type structures. The overall testosterone binding of the 77 Fab is similar to that of the wild-type. The improved affinity and specificity of the 77 Fab fragment are due to more comprehensive packing of the testosterone with the protein, which is the result of small structural changes within the variable domains. Only one important binding site residue Glu-95 of the heavy chain CDR3 is mutated to alanine in the 77 Fab fragment. This mutation, originally selected from the phage library based on improved specificity, provides more free space for the testosterone D-ring. The light chain CDR1 of 77 Fab containing eight mutations has the most significant effect on the improved affinity, although it has no direct contact with the testosterone. The mutations of CDR-L1 cause a rearrangement in its conformation, leading to an overall fine reshaping of the binding site.     

Helix-stabilized Fv (hsFv) antibody fragments: substituting the constant domains of a Fab fragment for a heterodimeric coiled-coil domain.

Antibody Fv fragments would in principle be useful for a variety of biotechnological applications because of their small size and the possibility to produce them in relatively large amounts in recombinant form; however, their limited stability is a drawback. To solve this problem, both domains are usually fused via a peptide linker to form a single-chain Fv (scFv) fragment, but in some cases this leads to a dimerization. We present an alternative format for stabilizing antibody Fv fragments. The C(H)1 and C(L) domain of the Fab fragment were replaced with a heterodimeric coiled coil (WinZip-A2B1), which had previously been selected using a protein-fragment complementation assay in Escherichia coli. This new antibody format was termed helix-stabilized Fv fragment (hsFv), and was compared to the corresponding Fv, Fab and single-chain Fv format. Bacterial growth and expression of the hsFv was significantly improved compared to the Fab fragment. The hsFv fragment formed a heterodimer of heavy and light chain with the expected molecular mass, also under conditions where the scFv fragment was predominantly dimeric. The hsFv fragment was significantly more stable than the Fv fragment, and nearly as stable as the scFv fragment under the conditions used (80 nM protein concentration). Thus, the format of a helix-stabilized Fv (hsFv) fragment can be a useful alternative to existing recombinant antibody formats, especially in cases where poor expression of Fab fragments or multimerization of scFv fragments is a problem.     

A monoclonal antibody fab fragment crystallized with and without a peptide epitope from HIV

The Fab fragment of CB 4-1, a monoclonal murine antibody against HIV protein p24, has been produced. It forms a complex with a synthetic antigen, an epitope of p24 made up of 11 amino acids, with the binding constant k_d = 3.6 × 10^?9 M. Crystals of hexagonal and orthorhombic space group has been obtained by cocrystallization of the Fab with the epitope and crystallization without the epitope, respectively. In either case, the crystals are suitable for X-ray structural analysis. Crystals of the Fab fragment cocrystallized with the peptide have the space group P 6₃22 with cell dimensions of a = b = 105 Å, c = 297 Å. Fab crystals without the epitope are in space group C 222 with cell dimensions a = 110.1 Å, b = 110.2 c Å = 150.1 Å. © 1993 Wiley-Liss, Inc.     

Neutralizing chimeric mouse-human antibodies against Burkholderia pseudomallei protease: expression, purification and characterization

A recombinant Fab monoclonal antibody (Fab) C37, previously obtained by phage display and biopanning of a random antibody fragment library against Burkholderia pseudomallei protease, was expressed in different strains of Escherichia coli. E. coli strain HB2151 was deemed a more suitable host for Fab expression than other E. coli strains when grown in media supplemented with 0.2 % glycerol. The expressed Fab fragment was purified by affinity chromatography on a Protein G-Sepharose column, and the specificity of the recombinant Fab C37 towards B. pseudomallei protease was proven by Western blotting, enzyme-linked immunosorbent assay (ELISA) and by proteolytic activity neutralization. In addition, polyclonal antibodies against B. pseudomallei protease were produced in rabbits immunized with the protease. These were isolated from high titer serum by affinity chromatography on recombinant-Protein A-Sepharose. Purified polyclonal antibody specificity towards B. pseudomallei protease was proven by Western blotting and ELISA.     

The use of light-directed combinatorial peptide synthesis in epitope mapping

The application of light-directed combinatorial peptide synthesis to epitope mapping is described. Photolithography and solid phase peptide synthesis were combined in an automated fashion to assemble arrays containing 1024 peptide sequences on a glass support in ten steps with the precise location of each peptide known. The simultaneous synthesis of two slides containing three arrays of peptidtes each allowed for the independent screening of both a monoclonal antibody (mAb) and its Fab fragment at two different concentrations. A binary synthesis strategy was used to assemble the arrays, resulting in all deletions and truncations possible within the FLRRQFKVVT sequence being present and available for screening. The relative binding interactions of each peptide was determined by incubating the arrays with either mAb D32.39 and goat antimouse immunoglobulin G–FITC or mAb D32.39 Fab-FITC conjugate, followed by scanning the surface for fluorescence with an epifluorescence microscope. The fragment RQFKVVT was found to bind lightly to both the mAb and Fab fragment while tethered to the surface, and was measured to have 0.49 n M affinity in solution. The frame-shifted RRQFKVV sequence was found to have lower affinity both in solution (1.3 m M) and on the surface. The fragment RQFKVV was determined to be responsible for antibody recognition and was found to bind tightly when tethered to the surface, yet exhibited no binding in solution as the free acid, suggesting the requirement of an amidated C-terminus or an additional flunking residue. A deletion analysis revealed that the novel RQFKVT sequence exhibited higher affinity than the RQFKVV sequence while tethered to the surface. © 1994 John Wiley & Sons, Inc.     

Improving Fab’ fragment retention in an autonucleolytic <Emphasis Type="Italic">Escherichia coli</Emphasis> strain by swapping periplasmic nuclease translocation signal from OmpA to DsbA

Objectives

To reduce unwanted Fab’ leakage from an autonucleolytic Escherichia coli strain, which co-expresses OmpA-signalled Staphylococcal nuclease and Fab’ fragment in the periplasm, by substituting in Serratial nuclease and the DsbA periplasm translocation signal as alternatives.

Results

We attempted to genetically fuse a nuclease from Serratia marcescens to the OmpA signal peptide but plasmid construction failed, possibly due to toxicity of the resultant nuclease. Combining Serratial nuclease to the DsbA signal peptide was successful. The strain co-expressing this nuclease and periplasmic Fab’ grew in complex media and exhibited nuclease activity detectable by DNAse agar plate but its growth in defined medium was retarded. Fab’ coexpression with Staphylococcal nuclease fused to the DsbA signal peptide resulted in cells exhibiting nuclease activity and growth in defined medium. In cultivation to high cell density in a 5 l bioreactor, DsbA-fused Staphylococcal nuclease co-expression coincided with reduced Fab’ leakage relative to the original autonucleolytic Fab’ strain with OmpA-fused staphylococcal nuclease.

Conclusions

We successfully rescued Fab’ leakage back to acceptable levels and established a basis for future investigation of the linkage between periplasmic nuclease expression and leakage of co-expressed periplasmic Fab’ fragment to the surrounding growth media.

     

The crystal structure of the fab fragment of the monoclonal antibody MAK33. Implications for folding and interaction with the chaperone bip

The Fab fragment of the murine monoclonal antibody, MAK33, directed against human creatine kinase of the muscle-type, was crystallized and the three-dimensional structure was determined to 2.9 A. The antigen-binding surface of MAK33 shows a convex overall shape typical for immunoglobulins binding large antigens. The structure allows us to analyze the environment of cis-prolyl-peptide bonds whose isomerization is of key importance in the folding process. These residues seem to be involved with not only domain stability but also seem to play a role in the association of heavy and light chains, reinforcing the importance of beta-strand recognition in antibody assembly. The structure also allows the localization of segments of primary sequence postulated to represent binding sites for the ER-specific chaperone BiP within the context of the entire Fab fragment. These sequences are found primarily in beta-strands that are necessary for interactions between the individual domains.