High rate treatment of terephthalic acid production wastewater in a two-stage anaerobic bioreactor

The feasibility was studied of anaerobic treatment of wastewater generated during purified terephthalic acid (PTA) production in two-stage upflow anaerobic sludge blanket (UASB) reactor system. The artificial influent of the system contained the main organic substrates of PTA-wastewater: acetate, benzoate, and terephthalate. Three parallel operated reactors were used for the second stage, and seeded with a suspended terephthalate degrading culture, with and without additional methanogenic granular sludge (two different types). The first stage UASB-reactor was seeded with methanogenic granular sludge. Reactors were operated at 37 degrees C and pH 7. During the first 300 days of operation a clear distinction between the biomass grown in both reactor stages was obtained. In the first stage, acetate and benzoate were degraded at a volumetric loading rate of 40 g-COD/L . day at a COD-removal efficiency of 95% within the first 25 days of operation. No degradation of terephthalate was obtained in the first stage during the first 300 days of operation despite operation of the reactor at a decreased volumetric loading rate with acetate and benzoate of 9 g-COD/L . day from day 150. Batch incubation of biomass from the reactor with terephthalate showed that the lag-phase prior to terephthalate degradation remained largely unchanged, indicating that no net growth of terephthalate degrading biomass occurred in the first stage reactor. From day 300, however, terephthalate degradation was observed in the first stage, and the biomass in this reactor could successfully be enriched with terephthalate degrading biomass, resulting in terephthalate removal capacities of 15 g-COD/L . day. Even though no single reason could be identified why (suddenly) terephthalate degradation was obtained after such a long period of operation, it is suggested that the solid retention time as well the prevailing reactor concentrations acetate and benzoate may have played an important role. From day 1 of operation, terephthalate was degraded in the second stage. In presence of methanogenic granular biomass, high terephthalate removal capacities were obtained in these reactors (15 g-COD/L . day) after approximately 125 days of operation. From the results obtained it is concluded that terephthalate degradation is the bottleneck during anaerobic treatment of PTA-wastewater. Pre-removal of acetate and benzoate in staged bioreactor reduces the lag-phase prior to terephthalate degradation in latter stages, and enables high rate treatment of PTA-wastewater.     

Effect of sulfur source on the performance and metal retention of methanol-fed UASB reactors

The effect of a sulfur source on the performance and metal retention of methanol-fed upflow anaerobic sludge bed (UASB) reactors was investigated. For this purpose, two UASB reactors were operated with cobalt preloaded granular sludge (1 mM CoCl2; 30 degrees C; 24 h) at an organic loading rate (OLR) of 5 g COD.L reactor(-1).d(-1). One UASB reactor (R1) was operated without a sulfur source in the influent during the first 37 days. In this period the methanol conversion to methane remained very poor, apparently due to the absence of a sulfur source, because once cysteine, a sulfur-containing amino acid, was added to the influent of R1 (day 37) a full conversion of methanol to methane occurred within 6 days. The second reactor (R2) was operated with sulfate (0.41 mM) in the influent during the first 86 days of operation, during which no limitation in the methanol conversion to methane manifested. Cobalt washed out from the sludge at similar rates in both reactors. The leaching of cobalt occurred at two distinct rates, first at a high rate of 22 microg.g TSS(-1).d(-1), which proceeded mainly from the exchangeable and carbonate fraction and later at a relatively slow rate of 9 mug.g TSS(-1).d(-1) from the organic/sulfide fraction. This study showed that the supply of the sulfur source L-cysteine has a pronounced positive effect on the methanogenic activity and the retention of metals such as iron, zinc and molybdenum.     

Effects of process stability on anaerobic biodegradation of LAS in UASB reactors

Anaerobic biodegradation of linear alkylbenzene sulfonates (LAS) was studied in upflow anaerobic sludge blanket (UASB) reactors operated under mesophilic (37 degrees C) and thermophilic (55 degrees C) conditions. LAS C12 concentration in the influents was 10 mg.L(-1), and the hydraulic retention time in the reactors was 2 days. Adsorption of LAS C12 was assessed in an autoclaved control reactor and ceased after 115 days. The reactors were operated for a minimum of 267 days; 40-80% removal of LAS C12 was observed. A temperature reduction from 55 degrees C to 32 degrees C for 30 h resulted in process imbalance as indicated by increase of volatile fatty acids (VFA). The imbalance was much more intense in the LAS amended reactor compared with an unamended reactor. At the same time, the process imbalance resulted in discontinued LAS removal. This finding indicates that process stability is a key factor in anaerobic biological removal of LAS. After a recovery period, the removal of LAS resumed, providing evidence of biological anaerobic LAS degradation. The removal remained constant until termination of experiments in the reactor. Biodegradation of LAS in the mesophilic reactor was at the same level as in the thermophilic reactor under stable conditions.     

Flocculants effect in biomass retention in a UASB reactor treating dairy manure

The performance and biomass retention of an upflow anaerobic sludge bed (UASB) reactor treating liquid fraction of dairy manure has been investigated at several organic loading rates. Two identical UASB reactors were employed. The biomass of one UASB reactor (FBR) had previously been treated with a cationic polyacrylamide, the other reactor was operated as a control reactor (CR). At 3 and 2 days of HRT both reactors functioned similarly, but at 1.5 days HRT some differences were observed between both effluents. Mean COD(T) removal percentages were 83.4% and 76.5%; COD(VFA) values in effluents were 977 and 2682 mg l(-1) for the FBR and the CR respectively. The VSS initial value in both reactors was 25.66 g VSS, whereas after the experiment the quantities were 31.83 g VSS in the FBR and 23.18 g VSS in the CR reactors. Polymer addition resulted in a higher degree of biomass retention and better performance in the FBR reactor.     

Comparison of startup and anaerobic wastewater treatment in UASB, hybrid and baffled reactor

An experimental study was carried out to compare the performance of selected anaerobic high rate reactors operated simultaneously at 37?°C. The three reactors, namely upflow anaerobic sludge bed reactor (UASB), hybrid of UASB reactor and anaerobic filter (anaerobic hybrid reactor – AHR) and anaerobic baffled reactor (ABR), were inoculated with the anaerobic digested sludge from municipal wastewater treatment plant and tested with synthetic wastewater. This wastewater contained sodium acetate and glucose with balanced nutrients and trace elements (COD 6000?mg?·?l^?1). Organic loading rate (B _v ) was increased gradually from an initial 0.5?kg?·?m^?3?·?d^?1 to 15?kg?·?m^?3?·?d^?1 in all the reactors. From the comparison of the reactors' performance, the lowest biomass wash-out resulted from ABR. In the UASB, significant biomass wash-out was observed at the B _v 6?kg?·?m^?3?·?d^?1, and in the AHR at the B _v 12?kg?·?m^?3?·?d^?1. The demand of sodium bicarbonate for pH maintenance in ABR was two times higher as for UASB and AHR. The efficiency of COD removal was comparable for all three reactors – 80–90%. A faster biomass granulation was observed in the ABR than in the other two reactors. This fact is explained by the kinetic selection of filamentous bacteria of the Methanotrix sp. under a high (over 1.5?g?·?l^?1) acetate concentration.     

Thermophilic (55-65 degrees C) and extreme thermophilic (70-80 degrees C) sulfate reduction in methanol and formate-fed UASB reactors

The feasibility of thermophilic (55-65 degrees C) and extreme thermophilic (70-80 degrees C) sulfate-reducing processes was investigated in three lab-scale upflow anaerobic sludge bed (UASB) reactors fed with either methanol or formate as the sole substrates and inoculated with mesophilic granular sludge previously not exposed to high temperatures. Full methanol and formate degradation at temperatures up to, respectively, 70 and 75 degrees C, were achieved when operating UASB reactors fed with sulfate rich (COD/SO4(2-)=0.5) synthetic wastewater. Methane-producing archaea (MPA) outcompeted sulfate-reducing bacteria (SRB) in the formate-fed UASB reactor at all temperatures tested (65-75 degrees C). In contrast, SRB outcompeted MPA in methanol-fed UASB reactors at temperatures equal to or exceeding 65 degrees C, whereas strong competition between SRB and MPA was observed in these reactors at 55 degrees C. A short-term (5 days) temperature increase from 55 to 65 degrees C was an effective strategy to suppress methanogenesis in methanol-fed sulfidogenic UASB reactors operated at 55 degrees C. Methanol was found to be a suitable electron donor for sulfate-reducing processes at a maximal temperature of 70 degrees C, with sulfide as the sole mineralization product of methanol degradation at that temperature.     

Stimulation of methanol degradation in UASB reactors: in situ versus pre-loading cobalt on anaerobic granular sludge

The effect of pre-loading and in situ loading of cobalt onto a cobalt-limited granular sludge on the performance of methanol fed bioreactors was investigated. One upflow anaerobic sludge bed (UASB) reactor was inoculated with cobalt pre-loaded sludge (24h; 30 degrees C; 1 mM CoCl2) and a second UASB with unloaded sludge. The UASB reactors (30 degrees C; pH 7) were operated for 77 days at 8 h hydraulic retention time and organic loading rates ranging from 5 to 20 g COD.L reactor(-1).d(-1). Cobalt pre-loading clearly stimulated the methanogenic activity of the sludge with methanol as the substrate, e.g., after 30 days of reactor operation this activity was 5.8 times higher than that of the cobalt unloaded sludge. During the experiment, part of the cobalt leached from the pre-loaded sludge, i.e., 54% of the cobalt content was lost during the 77 days of reactor operation. Sequential metal extraction showed that losses mainly occurred from the exchangeable and carbonate fraction and in the sludge remaining cobalt was mainly present in the organic/sulfide fraction of the sludge. In situ loading of cobalt in the unloaded UASB reactor on day 57 by adding 31 microM cobalt to the influent for a 24-h period (16% of the cobalt present in the loaded sludge at day 11) resulted in a 4 time increase of the methanogenic activity of the sludge with methanol as the substrate at the end of the reactor experiment, while the accumulated amount of cobalt in the sludge only amounted to 6% of the cobalt accumulated in the loaded sludge (on day 11). This study showed that both pre-loading sludge and in situ loading are adequate for achieving an increased reactor performance of methanol fed UASB reactors operating under cobalt limitation. However, the in situ dosing procedure needs substantially lower amounts of cobalt, while it also gives significantly smaller losses of cobalt with the effluent.     

Acetate Degradation at 70 degrees C in Upflow Anaerobic Sludge Blanket Reactors and Temperature Response of Granules Grown at 70 degrees C

Anaerobic acetate degradation at 70 degrees C and at 55 degrees C (as a reference) was studied by running laboratory upflow anaerobic sludge blanket (UASB) reactors inoculated with mesophilic granular sludge. In UASB reactors fed with acetate-containing media (3 g of chemical oxygen demand [COD] per liter, corresponding to 47 mM acetate) approximately 50 days was needed at 70 degrees C and less than 15 days was needed at 55 degrees C to achieve an effluent COD of 500 to 700 mg/liter. In the UASB reactors at both 70 and 55 degrees C up to 90% of the COD was removed. Batch assays showed that sludges from two 70 degrees C UASB reactors, one run at a low effluent acetate concentration and the other run at a high effluent acetate concentration, exhibited slightly different responses to temperatures in the range from 37 to 70 degrees C. Both 70 degrees C sludges, as well as the 55 degrees C sludge, produced methane at temperatures of 37 to 73 degrees C. The 55 degrees C sludge exhibited shorter lag phases than the 70 degrees C sludges and higher specific methane production rates between 37 and 65 degrees C.     

Anaerobic dechlorination of pentachlorophenol in fixed-film and upflow anaerobic sludge blanket reactors using different inocula

Longterm performance and stability of two upflow anaerobic sludge blanket (UASB) reactors inoculated with granular sludge and treating a synthetic waste water containing pentachlorophenol (PCP) and phenol were studied. A similar system consisting of two fixed-film reactors inoculated with anaerobic digested sewage sludge were further studied. One reactor in each series received glucose in addition to the phenols. Dechlorination of PCP proceeded via two different dominating pathways in the respective reactor systems, suggesting that two distinct microbial populations were present, probably originating from the different inocula. Dechlorinating activity was maintained for more than 18 months in the UASB reactors and was generally higher than in the fixed-film reactors. In the fixed-film reactors, dechlorination of PCP suddenly decreased after 15.5 months of operation compared to earlier performance. Since no operational parameters had been changed, this indicated that the enriched culture was unstable on a longterm basis. Addition of yeast extract to the medium restored activity. General process stability in both reactor systems was clearly enhanced by the addition of glucose and was superior in the UASB/granular sludge system. The better performance and the higher stability in the UASB/granular sludge reactor highlights the importance of thorough screening of inocular prior to start-up of processes treating waste waters containing xenobiotic compounds.Abbreviations PCP pentachlorophenol - TeCP tetrachlorophenol - TCP trichlorophenol - DCP dichlorophenol - UASB upflow anaerobic sludge blanket - HRT hydraulic retention time     

Sedimentological evolution in an UASB treating SYNTHES, a new representative synthetic sewage, at low loading rates

The changes in the sedimentological attributes of the sludge bed in an upflow anaerobic sludge blanket (UASB) reactor fed with a low-strength wastewater mimicking raw domestic sewage were assessed in this study. The reactor was inoculated with 250 ml of granular sludge from a full-scale UASB reactor. The organic loading rate (OLR) varied from 1 to 2 g COD/ld. During the half-year long study, the reactor was operated at hydraulic retention times (HRTs) of 4.8 and 10 h, at 33 degrees C. Sludge sedimentology showed that the original granular sludge experienced serious instability and disintegration, leading to a much finer final grain assemblage, mainly due to substrate transfer limitation and cell starvation at the interior of larger granules. With time, the size uniformity tended to decrease, sphericity tended to increase, the skewness of the granule size distribution became negative, and the kurtosis became peaked and leptokurtic. In spite of the observed size reduction, reactor efficiency increased to a CODtotal removal of 96%. Biomass (sludge) yield was 0.012 g VS/g COD removed. The CH4 content of the biogas was high (up to 96%). This study thus highlights the treatment of a new type of wastewater with the deployment of the UASB reactor. It also reports the evolutionary trend of the biomass particle size distribution, making reference to a classic sedimentological appraisal.     

High upflow velocity and organic loading rate improve granulation in upflow anaerobic sludge blanket reactors

Five laboratory scale upflow anaerobic sludge blanket (UASB) reactors were seeded with nongranular sewage sludge. Granulation was obtained after 15–35 days when between 0.5 and 2.0m/h upflow liquid velocity was applied, with an organic loading rate (OLR) of 8g COD/l.d (COD is the chemical oxygen demand). Granules had different physical characteristics and specific activity (g COD_REMOVED/g volatile suspended solids) depending on the upflow liquid velocity applied. Granules were obtained in short startup periods (5 and 14 days) when a pilot-scale (180l) UASB reactor with a height of 4.7m was used to study hydraulic effects on the granulation process.     

Distribution and change of microbial activity in combined UASB and AFB reactors for wastewater treatment

A thermophilic upflow anaerobic sludge blanket (UASB) reactor was combined with a mesophilic aerobic fluidized bed (AFB) reactor for treatment of a medium strength wastewater with 2,700?mg COD?l^?1. The COD removal efficiency reached 75% with a removal rate of 0.2 g COD?l^?1 h^?1 at an overall hydraulic retention time 14 hours. The distribution of microbial activity and its change with hydraulic retention time in the two reactors were investigated by measuring ATP concentration in the reactors and specific ATP content of the biomass. In the UASB reactor, the difference in specific ATP was significant between the sludge bed and blanket solution (0.02?mg ATP g VS^?1 versus 0.85?mg ATP g VS^?1) even though the ATP concentrations in these two zones were similar. A great pH gradient up to 4 was developed along the UASB reactor. Since a high ATP or biological activity in the blanket solution could only be maintained in a narrow pH range from 6.5 to 7.5, the sludge granules showed a high pH tolerance and buffering capacity up to pH 11. The suspended biomass in AFB reactor had a higher specific ATP than the biomass fixed in polyurethane carriers (1.6?mg ATP g VS^?1 versus 1.1?mg ATP g VS^?1), which implies a starvation status of the immobilized cells due to mass transfer limitation. The aerobes had to work under starvation conditions in this polishing reactor. The anaerobic biomass brought into AFB reactor contributed to an increase in suspended solids, but not the COD removal because of its fast deactivation under aerobic conditions. A second order kinetic model was proposed for ATP decline of the anaerobes. The results on distribution of microbial activity in the two reactors as well as its change with hydraulic retention time lead to further performance improvement of the combined anaerobic/aerobic reactor system.     

Comparison of long-term performances and final microbial compositions of anaerobic reactors treating landfill leachate

Laboratory scale anaerobic upflow filter, sludge blanket and hybrid bed reactors were operated for 860 days in the treatment of high ammonia landfill leachate. Organic loading was gradually increased from 1.3 to 23.5 kg COD/m3 day in the start-up period and then fluctuated according to the COD concentration of raw leachate. To prevent free ammonia inhibition, influent pH was reduced to 4.5 after Day 181 and consequently COD removal efficiencies above 80% were achieved in all reactors. However, the anaerobic filter and hybrid bed reactor were generally found slightly more efficient and stable than the UASB reactor. In addition to conventional anaerobic reactor control parameters, the complementary techniques of denaturing gradient gel electrophoresis (DGGE), cloning and fluorescent in situ hybridization (FISH) were used to identify and compare the microbial profiles in the reactors at Day 830. Molecular analyses revealed that acetoclastic Methanosaeta species were prevalent in all reactors and configuration did not have an impact on microbial diversity in the long-term.     

Zinc deprivation of methanol fed anaerobic granular sludge bioreactors

The effect of omitting zinc from the influent of mesophilic (30 degrees C) methanol fed upflow anaerobic sludge bed (UASB) reactors, and latter zinc supplementation to the influent to counteract the deprivation, was investigated by coupling the UASB reactor performance to the microbial ecology of the bioreactor sludge. Limitation of the specific methanogenic activity (SMA) on methanol due to the absence of zinc from the influent developed after 137 days of operation. At that day, the SMA in medium with a complete trace metal solution except Zn was 3.4 g CH4-COD g VSS(-1) day(-1), compared to 4.2 g CH4-COD g VSS(-1) day(-1) in a medium with a complete (including zinc) trace metal solution. The methanol removal capacity during these 137 days was 99% and no volatile fatty acids accumulated. Two UASB reactors, inoculated with the zinc-deprived sludge, were operated to study restoration of the zinc limitation by zinc supplementation to the bioreactor influent. In a first reactor, no changes to the operational conditions were made. This resulted in methanol accumulation in the reactor effluent after 12 days of operation, which subsequently induced acetogenic activity 5 days after the methanol accumulation started. Methanogenesis could not be recovered by the continuous addition of 0.5 microM ZnCl2 to the reactor for 13 days. In the second reactor, 0.5 microM ZnCl2 was added from its start-up. Although the reactor stayed 10 days longer methanogenically than the reactor operated without zinc, methanol accumulation was observed in this reactor (up to 1.1 g COD-MeOH L(-1)) as well. This study shows that zinc limitation can induce failure of methanol fed UASB reactors due to acidification, which cannot be restored by resuming the continuous supply of the deprived metal.     

Evaluation of UASB reactor performance during start-up operation using synthetic mixed-acid waste

A start-up experiment was performed in a laboratory-scale, upflow anaerobic sludge blanket (UASB) reactor using seed sludge from a domestic waste treatment plant at 3.8-33.3gCODl(-1)day(-1) loading rates. Analysis over the height of the reactor with time showed that the VSS in the reactor was initially differentiated into active and non-active biomass at increasing gas production and upflow velocities, and specific update rates of the volatile fatty acids (VFA) components were pronounced at the bottom 10% of the reactor. During start-up, specific methanogenic activity and chemical oxygen demand (COD) uptake rate increased from 0.075 to 0.75gCOD-CH(4)(gVSS)(-1)day(-1) and from 0.08 to 0.875gCOD removed (gVSS)(-1)day(-1), respectively. When seed sludge from a distillery waste treatment plant was used, improved performance due to a predominance of active biomass was evident when the loading rate was increased from 9.4 to 28.7gCODl(-1)day(-1). The proposed start-up evaluation is an effective tool to successfully monitor performance of UASB reactors.     

Introduction of a de novo bioremediation ability, aryl reductive dechlorination, into anaerobic granular sludge by inoculation of sludge with Desulfomonile tiedjei.

Methanogenic upflow anaerobic granular-sludge blanket (UASB) reactors treat wastewaters at a high rate while simultaneously producing a useful product, methane; however, recalcitrant environmental pollutants may not be degraded. To impart 3-chlorobenzoate (3-CB)-dechlorinating ability to UASB reactors, we inoculated granular sludge in UASB reactors with either a pure culture of Desulfomonile tiedjei (a 3-CB-dechlorinating anaerobe) or a three-member consortium consisting of D. tiejei, a benzoate degrader, and an H2-utilizing methanogen. No degradation occurred in an uninoculated control reactor which was started with the same granular sludge, but inoculated reactors and granules from the inoculated UASB systems rapidly transformed 3-CB (54 mumol/day/g of granule biomass). After several months at a hydraulic retention time of 0.5 day, much shorter than the generation time of D. tiedjei, the reactors still dechlorinated 3-CB. This indicated that the bacteria were immobilized in the reactor granules, and by using an antibody probe for D. tiedjei, we demonstrated that this microorganism had colonized the sludge granules. These results represent the first addition of a pure culture or a defined microbial mixture to a viable waste treatment process to introduce a specific de novo degradative pathway into a granular-sludge consortium.     

Introduction of a de novo bioremediation ability, aryl reductive dechlorination, into anaerobic granular sludge by inoculation of sludge with Desulfomonile tiedjei.

Methanogenic upflow anaerobic granular-sludge blanket (UASB) reactors treat wastewaters at a high rate while simultaneously producing a useful product, methane; however, recalcitrant environmental pollutants may not be degraded. To impart 3-chlorobenzoate (3-CB)-dechlorinating ability to UASB reactors, we inoculated granular sludge in UASB reactors with either a pure culture of Desulfomonile tiedjei (a 3-CB-dechlorinating anaerobe) or a three-member consortium consisting of D. tiejei, a benzoate degrader, and an H2-utilizing methanogen. No degradation occurred in an uninoculated control reactor which was started with the same granular sludge, but inoculated reactors and granules from the inoculated UASB systems rapidly transformed 3-CB (54 mumol/day/g of granule biomass). After several months at a hydraulic retention time of 0.5 day, much shorter than the generation time of D. tiedjei, the reactors still dechlorinated 3-CB. This indicated that the bacteria were immobilized in the reactor granules, and by using an antibody probe for D. tiedjei, we demonstrated that this microorganism had colonized the sludge granules. These results represent the first addition of a pure culture or a defined microbial mixture to a viable waste treatment process to introduce a specific de novo degradative pathway into a granular-sludge consortium.     

Enhancing the start-up of a UASB reactor treating domestic wastewater by adding a water extract of Moringa oleifera seeds

Water extract of Moringa oleifera seeds (WEMOS) was used to enhance the start-up of a self-inoculated upflow anaerobic sludge blanket (UASB) reactor treating raw domestic wastewater. Two reactors labelled control (RC) and WEMOS addition (RM) were started without special inoculum. Both reactors were fed continuously for 22 weeks with domestic wastewater containing an average total chemical oxygen demand (COD) of 320 mg O2/l and suspended solid (SS) of 165 mg/l. The reactors operated during the entire experimental period at 29 degrees C and at a hydraulic retention time (HRT) of 4 h. The RM reactor received 2 ml WEMOS per litre of influent. WEMOS solution was prepared on the basis of 2.5% (w/v) ground M. oleifera seeds in water. The results of 22 weeks' operation showed an improvement in the performance of the RM compared to that of the RC. The dosage of WEMOS in the feed (1) shortened the biological start-up period by 20%, (2) increased acidogenic and methanogenic activity by a factor of 2.4 and 2.2 respectively, (3) increased the specific biogas production by a factor of 1.6, (4) favoured fast growth of the sludge bed, and (5) allowed the aggregation of coccoid bacteria and growth of microbial nuclei, which are precursors of anaerobic granulation.     

Reactivation of effluent granular sludge from a high-rate Anammox reactor after storage

In this study, effluent sludge from a high-rate Anammox reactor was used to re-start new Anammox reactors for the reactivation of Anammox granular sludge. Different start-up strategies were evaluated in six upflow anaerobic sludge blanket (UASB) reactors (R₁–R₆) for their effect on nitrogen removal performance. Maximal nitrogen removal rates (NRRs) greater than 20 kg N/m³/day were obtained in reactors R₃–R₅, which were seeded with mixed Anammox sludge previously stored for approximately 6 months and 1 month. A modified Boltzmann model describing the evolution of the NRR fit the experimental data well. An amount of sludge added to the UASB reactor or decreasing the loading rate proved effective in relieving the substrate inhibition and increasing the NRR. The modified Stover–Kincannon model fit the nitrogen removal data in the Anammox reactors well, and the simulation results showed that the Anammox process has great nitrogen removal potential. The observed inhibition in the Anammox reactors may have been caused by high levels of free ammonia. The sludge used to seed the reactors did not settle well; sludge flotation was observed even after the reactors were operated for a long time at a floating upward velocity (F_s) of greater than 100 m/h. The settling sludge, however, exhibited good settling properties. Scanning electron microscopy showed that the Anammox granules consisted mainly of spherical and elliptical bacteria with abundant filaments on their surface. Hollows in the granules were also present, which may have contributed to sludge floatation.     

Degradation of 4-chlorophenol in UASB reactor under methanogenic conditions

Treatment of simulated wastewater containing 40 mg/l of 4-chlorophenol (4-CP) was carried out in an upflow anaerobic sludge blanket (UASB) reactor under methanogenic condition. The performance of this test UASB reactor was evaluated in terms of 4-CP removal. Hydraulic retention time (HRT) and substrate:co-substrate ratio for the 4-CP removal was optimized by varying the influent flow rate (13-34.7 ml/min) and sodium acetate concentration (2-5 g/l), respectively. A control UASB reactor, which was not exposed to 4-CP was also operated under similar conditions. Organic loading rate (OLR) was varied in the range of 2-5.3 kg/m(3)/d and 1.7-4.2 kg/m(3)/d, respectively, for HRT and substrate:co-substrate ratio studies, respectively. The optimum HRT and substrate:co-substrate ratio for the removal of 4-CP was 12h and 1:75, respectively. Removal of 4-CP achieved at optimum HRT and substrate:co-substrate ratio was 88.3+/-0.7%. Removal of 4-CP occurred through dehalogenation and caused increase in chloride ion concentration in the effluent by 0.23-0.27 mg/mg 4-CP removed. The ring cleavage test showed the ortho mode of ring cleavage of 4-CP. Change in the elemental composition of the anaerobic biomass of UASB reactors was observed during the study period. Concentration of Ca(2+) increased in the biomass and this could be attributed to the biosoftening. Specific methanogenic activity of the sludge of control and test UASB reactor was 0.832 g CH(4) COD/g VSS d and 0.694 g CH(4) COD/g VSS d, respectively.