Metabolic flux analysis of carbon balance in Lactobacillus strains

Metabolic flux analyses were performed based on the carbon balance of six different Lactobacillus strains used in this study. Results confirmed that L. delbrueckii, L. plantarum ATCC 21028, L. plantarum NCIMB 8826 ΔldhL1, L. plantarum NCIMB 8826 ΔldhL1‐pCU‐PxylAB, and L. plantarum NCIMB 8826 ΔldhL1‐pLEM415‐xylAB metabolized glucose via EMP: whereas, L. brevis metabolized glucose via PK pathway. Xylose was metabolized through the PK pathway in L. brevis, L. plantarum NCIMB 8826 ΔldhL1‐pCU‐PxylAB and L. plantarum NCIMB 8826 ΔldhL1‐pLEM415‐xylAB. Operation of both EMP and PK pathways was found in L. brevis, L. plantarum NCIMB 8826 ΔldhL1‐pCU‐PxylAB, and L. plantarum NCIMB 8826 ΔldhL1‐pLEM415‐xylAB when glucose plus xylose were used as carbon source. The information of detailed carbon flow may help the strain and biomass selection in a designed process of lactic acid biosynthesis. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1397–1403, 2016     

Steps Toward High‐Performance PLA: Economical Production of d‐Lactate Enabled by a Newly Isolated Sporolactobacillus terrae Strain

Optically pure d ‐lactate production has received much attention for its critical role in high‐performance polylactic acid production. However, the current technology can hardly meet the comprehensive demand of industrialization on final titer, productivity, optical purity, and raw material costs. Here, an efficient d ‐lactate producer strain, Sporolactobacillus terrae (S. terrae) HKM‐1, is isolated for d ‐lactate production. The strain HKM‐1 shows extremely high d ‐lactate fermentative capability by using peanut meal, soybean meal, or corn steep liquor powder as a sole nitrogen source; the final titers (205.7 g L^?1, 218.9 g L^?1, and 193.9 g L^?1, respectively) and productivities (5.56 g L^?1 h^?1, 5.34 g L^?1 h^?1, and 3.73 g L^?1 h^?1, respectively) of d ‐lactate reached the highest level ever reported. A comparative genomic analysis between S. terrae HKM‐1 and previously reported d ‐lactate high‐producing Sporolactobacillus inulinus (S. inulinus) CASD is conducted. The results show that many unrelated genetic features may contribute to the superior performance in d ‐lactate production of S. terrae HKM‐1. This d ‐lactate producer HKM‐1, along with its fermentation process, is promising for sustainable d ‐lactate production by using agro‐industrial wastes.     

Co‐hydrolysis of lignocellulosic biomass for microbial lipid accumulation

The herbaceous perennial energy crops miscanthus, giant reed, and switchgrass, along with the annual crop residue corn stover, were evaluated for their bioconversion potential. A co‐hydrolysis process, which applied dilute acid pretreatment, directly followed by enzymatic saccharification without detoxification and liquid–solid separation between these two steps was implemented to convert lignocellulose into monomeric sugars (glucose and xylose). A factorial experiment in a randomized block design was employed to optimize the co‐hydrolysis process. Under the optimal reaction conditions, corn stover exhibited the greatest total sugar yield (glucose + xylose) at 0.545 g g^?1 dry biomass at 83.3% of the theoretical yield, followed by switch grass (0.44 g g^?1 dry biomass, 65.8% of theoretical yield), giant reed (0.355 g g^?1 dry biomass, 64.7% of theoretical yield), and miscanthus (0.349 g g^?1 dry biomass, 58.1% of theoretical yield). The influence of combined severity factor on the susceptibility of pretreated substrates to enzymatic hydrolysis was clearly discernible, showing that co‐hydrolysis is a technically feasible approach to release sugars from lignocellulosic biomass. The oleaginous fungus Mortierella isabellina was selected and applied to the co‐hydrolysate mediums to accumulate fungal lipids due to its capability of utilizing both C5 and C6 sugars. Fungal cultivations grown on the co‐hydrolysates exhibited comparable cell mass and lipid production to the synthetic medium with pure glucose and xylose. These results elucidated that combining fungal fermentation and co‐hydrolysis to accumulate lipids could have the potential to enhance the utilization efficiency of lignocellulosic biomass for advanced biofuels production. Biotechnol. Bioeng. 2013; 110: 1039–1049. © 2012 Wiley Periodicals, Inc.     

Sweet Sorghum Juice and Bagasse as Feedstocks for the Production of Optically Pure Lactic Acid by Native and Engineered <Emphasis Type="Italic">Bacillus coagulans</Emphasis> Strains

Sweet sorghum is a bioenergy crop that produces large amounts of soluble sugars in its stems (3–7 Mg ha^?1) and generates significant amounts of bagasse (15–20 Mg ha^?1) as a lignocellulosic feedstock. These sugars can be fermented not only to biofuels but also to bio-based chemicals. The market potential of the latter may be higher given the current prices of petroleum and natural gas. The yield and rate of production of optically pure d-(?)- and l-(+)-lactic acid as precursors for the biodegradable plastic polylactide was optimized for two thermotolerant Bacillus coagulans strains. Strain 36D1 fermented the sugars in unsterilized sweet sorghum juice at 50 °C to l-(+)-lactic acid (～150 g L^?1; productivity, 7.2 g L^?1 h^?1). B. coagulans strain QZ19-2 was used to ferment sorghum juice to d-(?)-lactic acid (～125 g L^?1; productivity, 5 g L^?1 h^?1). Carbohydrates in the sorghum bagasse were also fermented after pretreatment with 0.5 % phosphoric acid at 190 °C for 5 min. Simultaneous saccharification and co-fermentation of all the sugars (SScF) by B. coagulans resulted in a conversion of 80 % of available carbohydrates to optically pure lactic acid depending on the B. coagulans strain used as the microbial biocatalyst. Liquefaction of pretreated bagasse with cellulases before SScF (L + SScF) increased the productivity of lactic acid. These results show that B. coagulans is an effective biocatalyst for fermentation of all the sugars present in sweet sorghum juice and bagasse to optically pure lactic acid at high titer and productivity as feedstock for bio-based plastics.     

d-Lactic acid biosynthesis from biomass-derived sugars via Lactobacillus delbrueckii fermentation

Poly-lactic acid (PLA) derived from renewable resources is considered to be a good substitute for petroleum-based plastics. The number of poly l-lactic acid applications is increased by the introduction of a stereocomplex PLA, which consists of both poly-l and d-lactic acid and has a higher melting temperature. To date, several studies have explored the production of l-lactic acid, but information on biosynthesis of d-lactic acid is limited. Pulp and corn stover are abundant, renewable lignocellulosic materials that can be hydrolyzed to sugars and used in biosynthesis of d-lactic acid. In our study, saccharification of pulp and corn stover was done by cellulase CTec2 and sugars generated from hydrolysis were converted to d-lactic acid by a homofermentative strain, L. delbrueckii, through a sequential hydrolysis and fermentation process (SHF) and a simultaneous saccharification and fermentation process (SSF). 36.3 g L^?1 of d-lactic acid with 99.8 % optical purity was obtained in the batch fermentation of pulp and attained highest yield and productivity of 0.83 g g^?1 and 1.01 g L^?1 h^?1, respectively. Luedeking–Piret model described the mixed growth-associated production of d-lactic acid with a maximum specific growth rate 0.2 h^?1 and product formation rate 0.026 h^?1, obtained for this strain. The efficient synthesis of d-lactic acid having high optical purity and melting point will lead to unique stereocomplex PLA with innovative applications in polymer industry.     

Microbial production of d‐lactic acid from dried distiller's grains with solubles

d ‐Lactic acid production is gaining increasing attention due to the thermostable properties of its polymer, poly‐d ‐lactic acid . In this study, Lactobacillus coryniformis subsp. torquens, was evaluated for its ability to produce d ‐lactic acid using Dried Distiller's Grains with Solubles (DDGS) hydrolysate as the substrate. DDGS was first subjected to alkaline pretreatment with sodium hydroxide to remove the hemicellulose component and the generated carbohydrate‐rich solids were then subjected to enzymatic hydrolysis using cellulase mixture Accellerase® 1500. When comparing separate hydrolysis and fermentation and simultaneous saccharification and fermentation (SSF) of L. coryniformis on DDGS hydrolysate, the latter method demonstrated higher d ‐lactic acid production (27.9 g/L, 99.9% optical purity of d ‐lactic acid), with a higher glucose to d ‐lactic acid conversion yield (84.5%) compared to the former one (24.1 g/L, 99.9% optical purity of d ‐lactic acid). In addition, the effect of increasing the DDGS concentration in the fermentation system was investigated via a fed‐batch SSF approach, where it was shown that the d ‐lactic acid production increased to 38.1 g/L and the conversion yield decreased to 70%. In conclusion, the SSF approach proved to be an efficient strategy for the production of d ‐lactic acid from DDGS as it reduced the overall processing time and yielded high d ‐lactic acid concentrations.     

Enhanced direct ethanol production by cofactor optimization of cell surface‐displayed xylose isomerase in yeast

Xylose isomerase (XylC) from Clostridium cellulovorans can simultaneously perform isomerization and fermentation of d ‐xylose, the main component of lignocellulosic biomass, and is an attractive candidate enzyme. In this study, we optimized a specified metal cation in a previously established Saccharomyces cerevisiae strain displaying XylC. We investigated the effect of each metal cation on the catalytic function of the XylC‐displaying S. cerevisiae. Results showed that the divalent cobalt cations (Co²⁺) especially enhanced the activity by 46‐fold. Co²⁺ also contributed to d ‐xylose fermentation, which resulted in improving ethanol yields and xylose consumption rates by 6.0‐ and 2.7‐fold, respectively. Utility of the extracellular xylose isomerization system was exhibited in the presence of mixed sugar. XylC‐displaying yeast showed the faster d ‐xylose uptake than the yeast producing XI intracellularly. Furthermore, direct xylan saccharification and fermentation was performed by unique yeast co‐culture system. A xylan‐degrading yeast strain was established by displaying two kinds of xylanases; endo‐1,4‐β‐xylanase (Xyn11B) from Saccharophagus degradans, and β‐xylosidase (XlnD) from Aspergillus niger. The yeast co‐culture system enabled fine‐tuning of the initial ratios of the displayed enzymes (Xyn11B:XlnD:XylC) by adjusting the inoculation ratios of Xylanases (Xyn11B and XlnD)‐displaying yeast and XylC‐displaying yeast. When the enzymes were inoculated at the ratio of 1:1:2 (1.39 × 10¹³: 1.39 × 10¹³: 2.78 × 10¹³ molecules), 6.0 g/L ethanol was produced from xylan. Thus, the cofactor optimization and the yeast co‐culture system developed in this study could expand the prospect of biofuels production from lignocellulosic biomass. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1068–1076, 2017     

Methyl jasmonate enhanced production of rosmarinic acid in cell cultures of Satureja khuzistanica in a bioreactor

The growing interest in rosmarinic acid (RA), an ester of caffeic acid and 3,4‐dihydroxyphenyl lactic acid, is due to its biological activities, which include cognitive‐enhancing effects, slowing the development of Alzheimer's disease, cancer chemoprotection, and anti‐inflammatory activity. Inspired by the challenge of meeting the growing demand for this plant secondary metabolite, we developed a biotechnological platform based on cell suspension cultures of Satureja khuzistanica. The high amounts of RA produced by this system accumulated mainly inside the cells. To further improve production, two elicitors, 100 μM methyl jasmonate (MeJA) and 40 mM cyclodextrin (CD), were tested, separately and together. MeJA increased RA productivity more than 3‐fold, the elicited cultures achieving an RA production of 3.9 g L^?1 without affecting biomass productivity. CD did not have a clear effect on RA production, and under the combined treatment of MeJA + CD only a small amount of RA was released to the medium. When the cell culture was transferred from a shake flask to a wave‐mixed bioreactor, a maximum RA production of 3.1 g L^?1 and biomass productivity of 18.7 g L^?1 d^?1 was achieved under MeJA elicitation, demonstrating the suitability of S. khuzistanica cell suspensions for the biotechnological production of this bioactive plant secondary metabolite.     

Particle concentration and yield stress of biomass slurries during enzymatic hydrolysis at high‐solids loadings

Effective and efficient breakdown of lignocellulosic biomass remains a primary barrier for its use as a feedstock for renewable transportation fuels. A more detailed understanding of the material properties of biomass slurries during conversion is needed to design cost‐effective conversion processes. A series of enzymatic saccharification experiments were performed with dilute acid pretreated corn stover at initial insoluble solids loadings of 20% by mass, during which the concentration of particulate solids and the rheological property yield stress (τ_y) of the slurries were measured. The saccharified stover liquefies to the point of being pourable (τ_y ≤ 10 Pa) at a total biomass conversion of about 40%, after roughly 2 days of saccharification for a moderate loading of enzyme. Mass balance and semi‐empirical relationships are developed to connect the progress of enzymatic hydrolysis with particle concentration and yield stress. The experimental data show good agreement with the proposed relationships. The predictive models developed here are based on established physical principles and should be applicable to the saccharification of other biomass systems. The concepts presented, especially the ability to predict yield stress from extent of conversion, will be helpful in the design and optimization of enzymatic hydrolysis processes that operate at high‐solids loadings. Biotechnol. Bioeng. 2009; 104: 290–300 © 2009 Wiley Periodicals, Inc.     

Co-generation of ethanol and <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid from corn stalk under a hybrid process

Background

Corn stover, as one important lignocellulosic material, has characteristics of low price, abundant output and easy availability. Using corn stover as carbon source in the fermentation of valuable organic chemicals contributes to reducing the negative environmental problems and the cost of production. In ethanol fermentation based on the hydrolysate of corn stover, the conversion rate of fermentable sugars is at a low level because the native S. cerevisiae does not utilize xylose. In order to increase the conversion rate of fermentable sugars deriving from corn stover, an effective and energy saving biochemical process was developed in this study and the residual xylose after ethanol fermentation was further converted to l-lactic acid.

Results

In the hybrid process based on the hydrolysate of corn stover, the ethanol concentration and productivity reached 50.50 g L^?1 and 1.84 g L^?1 h^?1, respectively, and the yield of ethanol was 0.46 g g^?1. The following fermentation of l-lactic acid provided a product titer of 21.50 g L^?1 with a productivity of 2.08 g L^?1 h^?1, and the yield of l-lactic acid was 0.76 g g^?1. By adopting a blank aeration before the inoculation of B. coagulans LA1507 and reducing the final cell density, the l-lactic acid titer and yield reached 24.25 g L^?1 and 0.86 g g^?1, respectively, with a productivity of 1.96 g L^?1 h^?1.

Conclusions

In this work, the air pumped into the fermentor was used as both the carrier gas for single-pass gas stripping of ethanol and the oxygen provider for the aerobic growth of B. coagulans LA1507. Ethanol was effectively separated from the fermentation broth, while the residual medium containing xylose was reused for l-lactic acid production. As an energy-saving and environmental-friendly process, it introduced a potential way to produce bioproducts under the concept of biorefinery, while making full use of the hydrolysate of corn stover.

     

THE EFFECT OF TEMPERATURE ON L-LACTIC ACID PRODUCTION AND METABOLITE DISTRIBUTION OF Lactobacillus casei

The effect of temperature on the growth and L-lactic acid production of Lactobacillus casei G-03 was investigated in a 7-L bioreactor. It was found that the maximum specific growth rate (0.27 hr^?1) and L-lactic acid concentration (160.2 g L^?1) were obtained at a temperature of 41°C. Meanwhile, the maximum L-lactic acid yield, productivity, and dry cell weight were up to 94.1%, 4.44 g L^?1 hr^?1, and 4.30 g L^?1, respectively. At lower or higher temperature, the Lactobacillus casei G-03 showed lower acid production and biomass. Moreover, the main metabolite distribution of strain G-03 response to variations in temperatures was studied. The results suggested that temperature has a remarkable effect on metabolite distribution, and the maximum carbon flux toward lactic acid at the pyruvate node was obtained at 41°C, which had the minimum carbon flux toward acetic acid.     

Production of optically pure <Emphasis Type="SmallCaps">l</Emphasis>(+)-lactic acid from waste plywood chips using an isolated thermotolerant <Emphasis Type="Italic">Enterococcus faecalis</Emphasis> SI at a pilot scale

Utilization of renewable and low-cost lignocellulosic wastes has received major focus in industrial lactic acid production. The use of high solid loadings in biomass pretreatment potentially offers advantages over low solid loadings including higher lactic acid concentration with decreased production and capital costs. In this study, an isolated Enterococcus faecalis SI with optimal temperature 42 °C was used to produce optically pure l-lactic acid (>?99%) from enzyme-saccharified hydrolysates of acid-impregnated steam explosion (AISE)-treated plywood chips. The l-lactic acid production increased by 10% at 5 L scale compared to the similar fermentation scheme reported by Wee et al. The fermentation with a high solid loading of 20% and 35% (w/v) AISE-pretreated plywood chips had been successfully scaled up to process development unit scale (100 L) and pilot scale (9 m³), respectively. This is the first report of pilot-scale lignocellulosic lactic acid fermentation by E. faecalis with high lactic acid titer (nearly 92 g L^?1) and yield (0.97 kg kg^?1). Therefore, large-scale l-lactic acid production by E. faecalis SI shows the potential application for industries.     

Simultaneous saccharification and co-fermentation of crystalline cellulose and sugar cane bagasse hemicellulose hydrolysate to lactate by a thermotolerant acidophilic Bacillus sp

Polylactides produced from renewable feedstocks, such as corn starch, are being developed as alternatives to plastics derived from petroleum. In addition to corn, other less expensive biomass resources can be readily converted to component sugars (glucose, xylose, etc.) by enzyme and/or chemical treatment for fermentation to optically pure lactic acid to reduce the cost of lactic acid. Lactic acid bacteria used by the industry lack the ability to ferment pentoses (hemicellulose-derived xylose and arabinose), and their growth and fermentation optima also differ from the optimal conditions for the activity of fungal cellulases required for depolymerization of cellulose. To reduce the overall cost of simultaneous saccharification and fermentation (SSF) of cellulose, we have isolated bacterial biocatalysts that can grow and ferment all sugars in the biomass at conditions that are also optimal for fungal cellulases. SSF of Solka Floc cellulose by one such isolate, Bacillus sp. strain 36D1, yielded l(+)-lactic acid at an optical purity higher than 95% with cellulase (Spezyme CE; Genencor International) added at about 10 FPU/g cellulose, with a product yield of about 90% of the expected maximum. Volumetric productivity of SSF to lactic acid was optimal between culture pH values of 4.5 and 5.5 at 50 degrees C. At a constant pH of 5.0, volumetric productivity of lactic acid was maximal at 55 degrees C. Strain 36D1 also co-fermented cellulose-derived glucose and sugar cane bagasse hemicellulose-derived xylose simultaneously (SSCF). In a batch SSCF of 40% acid-treated hemicellulose hydrolysate (over-limed) and 20 g/L Solka Floc cellulose, strain 36D1 produced about 35 g/L lactic acid in about 144 h with 15 FPU of Spezyme CE/g cellulose. The maximum volumetric productivity of lactic acid in this SSCF was 6.7 mmol/L (h). Cellulose-derived lactic acid contributed to about 30% of this total lactic acid. These results show that Bacillus sp. strain 36D1 is well-suited for simultaneous saccharification and co-fermentation of all of the biomass-derived sugars to lactic acid.     

Integrated production of lactic acid and biomass on distillery stillage

The possibilities of parallel lactic acid and biomass production in batch and fed-batch fermentation on distillery stillage from bioethanol production were studied. The highest lactic acid yield and productivity of 92.3 % and 1.49 g L^?1 h^?1 were achieved in batch fermentation with initial sugar concentration of 55 g L^?1. A significant improvement of the process was achieved in fed-batch fermentation where the concentration of lactic acid was increased to 47.6 % and volumetric productivity for 21 % over the batch process. A high number of Lactobacillus rhamnosus ATCC 7469 viable cells of 10⁹ CFU ml^?1 was attained at the end of fed-batch fermentation. The survival of 92.9 % of L. rhamnosus cells after 3 h of incubation at pH 2.5 validated that the fermentation media remained after lactic acid removal could be used as a biomass-enriched animal feed thus making an additional value to the process.     

Comparative Toxicity of Three Organic Acids to Freshwater Organisms and Their Impact on Aquatic Ecosystems

The comparative toxicity of lactic acid, acetic acid, and benzoic acid to tilapia (Oreochromis mossambicus), cladoceran crustacea (Moina micrura), and oligochaete worm (Branchiura sowerbyi) were determined using static bioassay tests. Worms were found most sensitive to all the acids whereas the cladoceran was found most resistant to lactic acid and the fish most resistant to acetic acid and benzoic acid. The 96h LC₅₀ values of lactic acid, acetic acid, and benzoic acid, were, respectively, 257.73, 272.87, and 276.74 mg L^?1 for O. mossambicus; 329.12, 163.72, and 71.65 mg L^?1 for M. micrura and 50.82, 14.90, and 39.47 mg L^?1 for B. sowerbyi. Tilapia lost appetite at sub-lethal concentrations as low as 2.18 mg L^?1 lactic acid, 1.26 mg L^?1 acetic acid, and 13.84 mg L^{? 1} of benzoic acid. Growth and reproduction of the fish were affected following 90-day chronic exposure to sub-lethal concentrations of the acids. Minimum effective concentration of the acids that significantly reduced food conversion efficiency (FCE), percent increase of weight, specific growth rate, yield and fecundity of the fish were 2.18, 1.47, and 3.95 mg · L^?1 of lactic acid, acetic acid, and benzoic acid, respectively. Effects of acetic acid and benzoic acid on FCE, weight increase, and yield were not significantly different from each other whereas lactic acid produced different effects from acetic acid as well as benzoic acid. Mean values of dissolved oxygen, primary productivity, and plankton populations of the test medium significantly reduced from control at 16.94 mg L^?1 lactic acid, 16.79 mg L^?1 acetic acid, and 13.84 mg L^?1 benzoic acid.     

A C6/C5 co‐fermenting Saccharomyces cerevisiae strain with the alleviation of antagonism between xylose utilization and robustness

During second‐generation bioethanol production from lignocellulosic biomass, the desired traits for fermenting microorganisms, such as Saccharomyces cerevisiae, are high xylose utilization and high robustness to inhibitors in lignocellulosic hydrolysates. However, as observed previously, these two traits easily showed the antagonism, one rising and the other falling, in the C6/C5 co‐fermenting S. cerevisiae strain. In this study, LF1 obtained in our previous study is an engineered budding yeast strain with a superior co‐fermentation capacity of glucose and xylose, and was then mutated by atmospheric and room temperature plasma (ARTP) mutagenesis to improve its robustness. The ARTP‐treated cells were grown in 50% (v/v) leachate from lignocellulose pretreatment with high inhibitors content for adaptive evolution. After 30 days, the generated mutant LF1‐6 showed significantly enhanced tolerance, with a six‐fold increase in cell density in the above leachate. Unfortunately, its xylose utilization dropped markedly, indicating the recurrence of the negative correlation between xylose utilization and robustness. To alleviate this antagonism, LF1‐6 cells were iteratively mutated with ARTP mutagenesis and then anaerobically grown using xylose as the sole carbon source, and xylose utilization was restored in the resulting strain 6M‐15. 6M‐15 also exhibited increased co‐fermentation performance of xylose and glucose with the highest ethanol productivity reported to date (0.525 g g^?1 h^?1) in high‐level mixed sugars (80 g L^?1 glucose and 40 g L^?1 xylose) with no inhibitors. Meanwhile, its fermentation time was shortened by 8 h compared to that of LF1. During the fermentation of non‐detoxified lignocellulosic hydrolysate with high inhibitor concentrations at pH ~3.5, 6M‐15 can efficiently convert glucose and xylose with an ethanol yield of 0.43 g g^?1. 6M‐15 is also regarded as a potential chassis cell for further design of a customized strain suitable for production of second‐generation bioethanol or other high value‐added products from lignocellulosic biomass.     

Improvement of both lipid and biomass productivities of Qatar Chlorocystis isolate for biodiesel production and food security

Microalgae are considered a very promising alternative for biofuel production. Several strategies were developed to modulate and improve algae metabolites production to meet the requirements for biodiesel production. Most previous research evidenced that the increase of the lipid content is accompanied by a decrease of the biomass production, which increases the cost of the downstream processing. Hence, the challenge is to find special culture conditions that increase the lipid and the biomass productivities simultaneously. In the present work, we developed a strategy for the improvement of biomass and lipid productivities in a novel local microalga isolate, Chlorocystis sp. QUCCCM14, which was not previously known as a promising strain. Indeed, culturing QUCCCM14 using f/2 medium with 10× NaH₂PO₄ (0.15 g L^?1 NaNO₃ and 5.6 mg L^?1 NaH₂PO₄) resulted in an improvement of 3.178 folds the lipid productivity reaching 56.121 mg L^?1 day^?1 and enhanced the biomass productivity reaching 141.363 mg L^?1 day^?1, simultaneously. Comparative analyses of the FAME profiles demonstrated that fed‐batch culture with phosphate or nitrate separately leads to a high production of the omega 3 fatty acids (Linolenic acid), whereas fed‐batch culture with phosphate and nitrate simultaneously increased the production of fatty acids suitable for biodiesel production.     

Continuous SSCF of AFEX™ pretreated corn stover for enhanced ethanol productivity using commercial enzymes and Saccharomyces cerevisiae 424A (LNH‐ST)

High productivity processes are critical for commercial production of cellulosic ethanol. One high productivity process—continuous hydrolysis and fermentation—has been applied in corn ethanol industry. However, little research related to this process has been conducted on cellulosic ethanol production. Here, we report and compare the kinetics of both batch SHF (separate hydrolysis and co‐fermentation) and SSCF (simultaneous saccharification and co‐fermentation) of AFEX? (Ammonia Fiber Expansion) pretreated corn stover (AFEX?‐CS). Subsequently, we designed a SSCF process to evaluate continuous hydrolysis and fermentation performance on AFEX?‐CS in a series of continuous stirred tank reactors (CSTRs). Based on similar sugar to ethanol conversions (around 80% glucose‐to‐ethanol conversion and 47% xylose‐to‐ethanol conversion), the overall process ethanol productivity for continuous SSCF was 2.3‐ and 1.8‐fold higher than batch SHF and SSCF, respectively. Slow xylose fermentation and high concentrations of xylose oligomers were the major factors limiting further enhancement of productivity. Biotechnol. Bioeng. 2013; 110: 1302–1311. © 2012 Wiley Periodicals, Inc.     

Impact of light quality on a native Louisiana Chlorella vulgaris/Leptolyngbya sp. co‐culture

Light effect on cultures of microalgae has been studied mainly on single species cultures. Cyanobacteria have photosynthetic pigments that can capture photons of wavelengths not available to chlorophylls. A native Louisiana microalgae (Chlorella vulgaris ) and cyanobacteria (Leptolyngbya sp.) co‐culture was used to study the effects of light quality (blue–467 nm, green–522 nm, red–640 nm and white–narrow peak at 450 nm and a broad range with a peak at 550 nm) at two irradiance levels (80 and 400 μmol m^?2 s^?1) on the growth, species composition, biomass productivity, lipid content and chlorophyll‐a production. The co‐culture shifted from a microalgae dominant culture to a cyanobacteria culture at 80 μmol m^?2 s^?1. The highest growth for the cyanobacteria was observed at 80 μmol μmol m^?2 s^?1 and for the microalgae at 400 μmol m^?2 s^?1. Red light at 400 μmol m^?2 s^?1 had the highest growth rate (0.41 d^?1), biomass (913 mg L^?1) and biomass productivity (95 mg L^?1 d^?1). Lipid content was similar between all light colors. Green light had the highest chlorophyll‐a content (1649 μg/L). These results can be used to control the species composition of mixed cultures while maintaining their productivity.