En route to economical eco‐friendly solvent system in enhancing sustainable recovery of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) copolymer

Separation of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)] from bacterial cell matter is a critical step in the downstream process with respect to material quality and eco‐balance as P(3HB‐co‐4HB) is widely used for biomedical applications. Therefore, an efficient and eco‐based extraction of P(3HB‐co‐4HB) using a combination of NaOH and Lysol in digesting the non‐polymeric cell material (NPCM) digestion is developed. The NaOH and Lysol show synergistic influence on the copolymer extraction at a high purity and recovery of 97 and 98 wt% respectively. The optimized cell digestion method was found applicable to a vast batch of cells containing copolymers from various 4HB monomer compositions. At the largest extraction volume of 100 L, P(3HB‐co‐4HB) with a purity of 89 wt% was extracted with a maximum recovery of 90 wt%. The method developed has also eliminated the cell pretreatment step. The extraction method developed in this research has not only produced an economic and efficient copolymer recovery but has also retained the copolymer quality, in term of its molecular weight and thermal properties. It demonstrates a practical and promising downstream processing method in recovering the copolymer effectively from the bacterial biomass.     

Enhanced production of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) copolymer with manipulated variables and its properties

Cupriavidus sp. USMAA1020, a local isolate was able to biosynthesis poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] copolymer with various 4HB precursors as the sole carbon source. Manipulation of the culture conditions such as cell concentration, phosphate ratio and culture aeration significantly affected the synthesis of P(3HB-co-4HB) copolymer and 4HB composition. P(3HB-co-4HB) copolymer with 4HB compositions ranging from 23 to 75 mol% 4HB with various mechanical and thermal properties were successfully produced by varying the medium aeration. The physical and mechanical properties of P(3HB-co-4HB) copolymers were characterized by NMR spectroscopy, gel-permeation chromatography, tensile test, and differential scanning calorimetry. The number-average molecular weights (M _n) of copolymers ranged from 260 × 10³ to 590 × 10³Da, and the polydispersities (M _w/M _n) were between 1.8 and 3.0. Increases in the 4HB composition lowered the molecular weight of these copolymers. In addition, the increase in 4HB composition affected the randomness of copolymer, melting temperature (T _m), glass transition temperature (T _g), tensile strength, and elongation to break. Enzymatic degradation of P(3HB-co-4HB) films with an extracellular depolymerase from Ochrobactrum sp. DP5 showed that the degradation rate increased proportionally with time as the 4HB fraction increased from 17 to 50 mol% but were much lower with higher 4HB fraction. Degradation of P(3HB-co-4HB) films with lipase from Chromobacterium viscosum exhibited highest degradation rate at 75 mol% 4HB. The biocompatibility of P(3HB-co-4HB) copolymers were evaluated and these copolymers have been shown to support the growth and proliferation of fibroblast cells.     

Multi‐armed poly(L‐glutamic acid)‐graft‐oligoethylenimine copolymers as efficient nonviral gene delivery vectors

Background

The application of polyethylenimine (PEI) in gene delivery has been severely limited by significant cytotoxicity that results from a nondegradable methylene backbone and high cationic charge density. It is therefore necessary to develop novel biodegradable PEI derivates for low‐toxic, highly efficient gene delivery.

Methods

A series of novel cationic copolymers with various charge density were designed and synthesized by grafting different kinds of oligoethylenimine (OEI) onto a determinate multi‐armed poly(L ‐glutamic acid) backbone. The molecular structures of multi‐armed poly(L ‐glutamic acid)‐graft‐OEI (MP‐g‐OEI) copolymers were characterized using nuclear magnetic resonance, viscosimetry and gel permeation chromatography. Moreover, the MP‐g‐OEI/DNA complexes were measured by a gel retardation assay, dynamic light scattering and atomic force microscopy to determine DNA binding ability, particle size, zeta potential, complex formation and shape, respectively. MP‐g‐OEI copolymers were also evaluated in Chinese hamster ovary and human embryonic kidney‐293 cells for their cytotoxicity and transfection efficiency.

Results

The particle sizes of MP‐g‐OEI/DNA complexes were in a range of 109.6–182.6 nm and the zeta potentials were in a range of 29.2–44.5 mV above the N/P ratio of 5. All the MP‐g‐OEI copolymers exhibited lower cytotoxicity and higher gene transfection efficiency than PEI25k in the absence and presence of serum with different cell lines. Importantly, the 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay revealed that the cytotoxicity of MP‐g‐OEI copolymers varied with their molecular weight and charge density, and two of MP‐g‐OEI copolymers (OEI600‐MP and OEI1800‐MP) could achieve optimal transfection efficiency at a similar low N/P ratio as that for PEI25k.

Conclusions

MP‐g‐OEI copolymers demonstrated considerable potential as nonviral vectors for gene therapy. Copyright © 2009 John Wiley & Sons, Ltd.     

Modeling of poly(3-hydroxybutyrate) production by high cell density fed-batch culture of R<Emphasis Type="Italic">alstonia eutropha</Emphasis>

High cell density culturing has been conducted for the production of poly(3-hydroxybutyrate) fed-batch cultures ofRalstonia eutropha with phosphate limitation. It was found that a high glucose concentration inhibited the synthesis of P(3HB) in the high cell density culture ofR. eutropha. Although a low glucose concentration can trigger the synthesis of P(3HB) in a manner similar to that of phosphate limitation, it also limited both the P(3HB) synthesis and the cell growth, and led to a low P(3HB) productivity because glucose is the sole carbon source in this reaction. An unstructured model was proposed for predicting the cell growth and P(3HB) synthesis in high cell density cultures ofR. eutropha, where the phosphate concentration played a key role in the accumulation of P(3HB) and in cell growth. Good agreements were found between the experimental data and model predictions. The results of simulation showed that the final P(3HB) concentration would decrease more than 25% when the glucose was concentration increased to 40 g/L, and indicated that the optimal glucose concentration for P(3HB) production by high cell density cultures ofR. eutropha was around 9 g/L.     

Biotechnological strategies to improve production of microbial poly‐(3‐hydroxybutyrate): a review of recent research work

Poly‐(3‐hydroxybutyrate) [P(3HB)] is a polyester synthesized as a carbon and energy reserve material by a wide number of bacteria. This polymer is characterized by its thermo‐plastic properties similar to plastics derived from petrochemical industry, such as polyethylene and polypropylene. Furthermore, P(3HB) is an inert, biocompatible and biodegradable material which has been proposed for several uses in medical and biomedical areas. Currently, only few bacterial species such as Cupriavidus necator, Azohydromonas lata and recombinant Escherichia coli have been successfully used for P(3HB) production at industrial level. Nevertheless, in recent years, several fermentation strategies using other microbial models such as Azotobacter vinelandii, A. chroococcum, as well as some methane‐utilizing species, have been developed in order to improve the P(3HB) production and also its mean molecular weight.     

Production of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by <Emphasis Type="Italic">Rhodopseudomonas palustris</Emphasis> SP5212

Summary Production of poly(3-hydroxybutyric acid) [P(3HB)] by Rhodopseudomonas palustris SP5212 isolated in this laboratory has been optimized under phototrophic microaerophilic conditions. Cells grown in malate medium accumulated 7.7% (w/w) P(3HB) of cellular dry weight at the early stationary phase of growth. The accumulated P(3HB) however, attained 15% (w/w) of cellular dry weight when acetate (1.0%, w/v) was used as the sole carbon source under nitrogen-limiting conditions. Synthesis and accumulation of polymer was favoured by sulphate-free conditions and at a phosphate concentration sub-optimal for growth. The polymer content of cells was increased drastically (34% of cellular dry weight) when the acetate containing medium was supplemented with n-alkanoic acids. Compositional analysis by H¹ NMR revealed that these accumulated polymers were composed of 3-hydroxybutyric acid and 3-hydroxyvaleric acid (3HV). The contents of 3HV in these copolymers ranged from 14 to 38 mol%.     

Thieno,Furo, and Selenopheno[3,4‐c]pyrrole‐4,6‐dione Copolymers: Air‐Processed Polymer Solar Cells with Power Conversion Efficiency up to 7.1%

Polymers based on thieno[3,4‐c]pyrrole‐4,6‐dione derivatives are interesting and promising candidates for organic bulk heterojunction solar cells. Herein, a series of push–pull conjugated polymers based on thieno[3,4‐c]pyrrole‐4,6‐dione (TPD), furo[3,4‐c]pyrrole‐4,6‐dione (FPD), and selenopheno[3,4‐c]‐pyrrole‐4,6‐dione (SePD) have been synthesized by direct heteroarylation polymerization and fully characterized. The impacts of both the heteroatom (sulfur, oxygen, and selenium) and the side chain (branched or linear) of [3,4‐c]pyrrole‐4,6‐dione unit on the electro‐optical properties have been investigated. Among polymers developed, two new highly processable terthiophene–SePD ( P4 ) and dithienosilole–SePD ( P9 ) copolymers led to air‐processed polymer solar cells with power conversion efficiencies of 5.1% and 7.1% using the following inverted configuration: ITO/ZnO/Polymer:PCBM/MoO₃/Ag. These promising results make P4 and P9 good candidates for further upscaling and device optimization.     

Biosynthesis of polylactic acid and its copolymers using evolved propionate CoA transferase and PHA synthase

For the synthesis of polylactic acid (PLA) and its copolymers by one‐step fermentation process, heterologous pathways involving Clostridium propionicum propionate CoA transferase (Pct_Cp) and Pseudomonas sp. MBEL 6‐19 polyhydroxyalkanoate (PHA) synthase 1 (PhaC1_Ps6‐19) were introduced into Escherichia coli for the generation of lactyl‐CoA endogenously and incorporation of lactyl‐CoA into the polymer, respectively. Since the wild‐type PhaC1_Ps6‐19 did not efficiently accept lactyl‐CoA as a substrate, site directed mutagenesis as well as saturation mutagenesis were performed to improve the enzyme. The wild‐type Pct_Cp was not able to efficiently convert lactate to lactyl‐CoA and was found to exert inhibitory effect on cell growth, random mutagenesis by error‐prone PCR was carried out. By employing engineered PhaC1_Ps6‐19 and Pct_Cp, poly(3‐hydroxybutyrate‐co‐lactate), P(3HB‐co‐LA), containing 20–49 mol% lactate could be produced up to 62 wt% from glucose and 3HB. By controlling the 3HB concentration in the medium, PLA homopolymer and P(3HB‐co‐LA) containing lactate as a major monomer unit could be synthesized. Also, P(3HB‐co‐LA) copolymers containing various lactate fractions could be produced from glucose alone by introducing the Cupriavidus necator β‐ketothiolase and acetoacetyl‐CoA reductase genes. Fed‐batch cultures were performed to produce P(3HB‐co‐LA) copolymers having 9–64 mol% of lactate, and their molecular weights, thermal properties, and melt flow properties were determined. Biotechnol. Bioeng. 2010; 105: 150–160. © 2009 Wiley Periodicals, Inc.     

Isolation and characterization of new poly(3HB)‐accumulating star‐shaped cell‐aggregates‐forming thermophilic bacteria

Aims: This study aimed at isolating thermophilic bacteria that utilize cheap carbon substrates for the economically feasible production of poly(3‐hydroxybutyrate), poly(3HB), at elevated temperatures. Methods and Results: Thermophilic bacteria were enriched from an aerobic organic waste treatment plant in Germany, and from hot springs in Egypt. Using the viable colony staining method for hydrophobic cellular inclusions with Nile red in mineral salts medium (MSM) containing different carbon sources, six Gram‐negative bacteria were isolated. Under the cultivation conditions used in this study, strains MW9, MW11, MW12, MW13 and MW14 formed stable star‐shaped cell‐aggregates (SSCAs) during growth; only strain MW10 consisted of free‐living rod‐shaped cells. The phylogenetic relationships of the strains as derived from 16S rRNA gene sequence comparisons revealed them as members of the Alphaproteobacteria. The 16S rRNA gene sequences of the isolates were very similar (>99% similarity) and exhibited similarities ranging from 93 to 99% with the most closely related species that were Chelatococcus daeguensis, Chelatococcus sambhunathii , Chelatococcus asaccharovorans, Bosea minatitlanensis, Bosea thiooxidans and Methylobacterium lusitanum. Strains MW9, MW10, MW13 and MW14 grew optimally in MSM with glucose, whereas strains MW11 and MW12 preferred glycerol as sole carbon source for growth and poly(3HB) accumulation. The highest cell density and highest poly(3HB) content attained were 4·8 g l^?l (cell dry weight) and 73% (w/w), respectively. Cells of all strains grew at temperatures between 37 and 55°C with the optimum growth at 50°C. Conclusions: New PHA‐accumulating thermophilic bacterial strains were isolated and characterized to produce poly(3HB) from glucose or glycerol in MSM at 50°C. SSCAs formation was reported during growth. Significance and Impact of the Study: To the best of our knowledge, this is the first report on the formation of SSCAs by PHA‐accumulating bacteria and also by thermophilic bacteria. PHA‐producing thermophiles can significantly reduce the costs of fermentative PHA production.     

Synthesis of Poly(3‐hydroxybutyrate‐co‐4‐hydrobutyrate) with a Target Mole Fraction of 4‐Hydroxybutyric Acid Units by Two‐Stage Continuous Cultivation of Delftia acidovorans P4a

Delftia acidovorans P4a (DSMZ 10474) was grown in mineral medium on acetic acid at pH 8.0 without an additional supply of nutrients like yeast extract or polypeptone. Using acetic acid and γ‐butyrolactone (GBL), copolymers with a 4HB content from 2–90 mol % were detected in batch experiments, depending on the ratio of the both carbon substrates. Due to the different consumption rates of the individual carbon substrates a multitude of different target mole fractions were difficult to produce by fed‐batch fermentation. Therefore, the two‐stage continuous cultivation technique was applied with two fermenters connected in series. At stage 2, the optimum PHA productivity of the bioreactor and a target 4HB content of the polymer could be precisely adjusted by the composition of the two substrates. This cultivation strategy was especially convenient when toxic substrates like acetic acid and GBL were employed. Using mixtures of acetic acid and GBL (3.5–23.5 mol % GBL), copolymers with a target mole fraction of 2.7–19 % 4HB could be produced. The PHA content was in the range of 52–60 %. The dilution rates (D) of the first and second fermenter were 0.2 h^–1 and 0.06 h^–1, respectively.     

Insulin‐Induced Ectodomain Shedding of Heparin‐Binding Epidermal Growth Factor‐Like Growth Factor in Adipocytes In Vitro

Heparin‐binding epidermal growth factor‐like growth factor (HB‐EGF) is synthesized as a type I transmembrane protein, which is proteolytically cleaved to release a soluble form via members of the a disintegrin and metalloproteinase (ADAM) family of proteolytic enzymes. This study was designed to elucidate the molecular mechanism underlying insulin‐induced HB‐EGF shedding in adipocytes in vitro. The 3T3‐L1 adipocytes with stable expression of alkaline phosphatase (AP)‐tagged proHB‐EGF (3T3‐L1/HB‐EGF‐AP adipocytes) were developed and AP activities of conditioned media were determined. Using 3T3‐L1/HB‐EGF‐AP adipocytes, we demonstrated that insulin induces HB‐EGF shedding in differentiated 3T3‐L1 adipocytes in a dose‐ and time‐dependent manner. There is no significant increase in insulin‐induced HB‐EGF shedding in undifferentiated 3T3‐L1 preadipocytes. Studies with metalloprotease inhibitors suggested that insulin‐induced HB‐EGF shedding in adipocytes is mediated at least in part via ADAM17. Treatment with recombinant HB‐EGF results in a dose‐ and time‐dependent increase in HB‐EGF shedding in adipocytes, which is significantly suppressed by pharmacologic blockade of ADAM17 (P < 0.01). Moreover, insulin‐induced HB‐EGF shedding in adipocytes is significantly inhibited by AG1478, an EGF receptor antagonist (P < 0.01). This study provides in vitro evidence that insulin induces HB‐EGF shedding in 3T3‐L1 adipocytes. Our data also suggest the role of ADAM17 in insulin‐induced HB‐EGF shedding in adipocytes.     

Control of acetic acid concentration by pH-stat continuous substrate feeding in heterotrophic culture phase of two-stage cultivation of Alcaligenes eutrophus for production of P(3HB) from CO2, H2, and O2 under non-explosive conditions

A-two stage culture method of hydrogen-oxidizing bacterium, Alcaligenes eutrophus, is used to produce poly-D-3-hydroxybutyrate, P(3HB) from CO2, O2, and H2 without using a very high oxygen transfer rate while maintaining the O2 concentration in gas phase below 6.9 (v/v)% to prevent detonation of the gas mixture. The two-stage method consists of a heterotrophic culture using fructose as carbon source for exponential cell growth and an autotrophic culture for P(3HB) accumulation. We investigated the use of acetic acid as a cheaper carbon source than fructose for the heterotrophic culture in the two-stage method. However, the acetate concentration in the culture system must be maintained at 1.0 g. dm-3 since its inhibitory effect on the cell growth is very strong. Then, high cell density cultivation of A. eutrophus was investigated by pH-stat continuous feeding of acetic acid to control acetate concentration. As a result, acetate concentration was automatically maintained around 1.0 g. dm-3 by using a feed with a composition in CH3COOH/CH3COONH4/KH2PO4 molar ratio of 5:1:0.084. Cell concentration increased to 48.6 g. dm-3 after 21 h of cultivation. The cell mass grown in the fed-batch culture on acetic acid was useful for P(3HB) production from CO2 in the subsequent autotrophic culture stage. Copyright 1999 John Wiley & Sons, Inc.     

Enhanced biosynthesis of P(3HB-3HV) and P(3HB-4HB) by amplification of.the cloned PHB biosynthesis genes in Alcaligenes eutrophus

The biosynthesis of P(3HB-3HV) and P(3HB-4HB) was carried out using transformants of Alcaligenes eutrophus harboring the cloned phbCAB, phbAB, and phbC genes. The molar fractions and yields of 3HV and 4HB increased significantly by enhancing enzymes related to PHB biosynthesis compared to the parent strain. Especially, PHB synthase was the most critical enzyme that regulated monomer compositions of P(3HB-3HV) and P(3HB-4HB) in the transformant. Even at the lower propionate or 4-hydroxybutyrate concentrations, the high molar fractions of 3HV or 4HB could be accumulated. The enforcement of PHB biosynthetic enzymes through the transformation of corresponding genes was identified to be an excellent method for modification of monomer composition of copolymer of A. eutrophus.     

An In‐situ glucose‐stimulated insulin secretion assay under perfusion bioreactor conditions

Perfusion bioreactors, unlike traditional in vitro cell culture systems, offer stringent control of physiological parameters such as pH, flow, temperature, and dissolved oxygen concentration which have been shown to have an impact on cellular behaviour and viability. Due to the relative infancy and the growing interest in these in vitro culture systems, detection methods to monitor cell function under dynamic perfusion bioreactor conditions remains one of the main challenges. In this study, INS‐1 cells, a cell line which exhibit glucose‐stimulated insulin secretion, were embedded in fibrin and cultured under perfusion bioreactor conditions for 48 h and then exposed to either a high‐, or low‐glucose concentration for 24 h. These cultures were compared to non‐bioreacted controls. Bioreacted cultures exposed to a high‐glucose concentration showed the highest glucose‐stimulated insulin secretion when compared to those in a low‐glucose environment. The stimulation index, a marker for insulin secretion functionality, increased over time. A lower incidence of apoptotic cells was observed in the bioreacted cultures when compared to non‐bioreacted ones, as evaluated by a TUNEL assay. Immunofluorescence staining of Ki67 and insulin was performed and showed no differences in the incidence of proliferative cells between conditions (bioreacted and non‐bioreacted), where all cells stained positive for insulin. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:454–462, 2017     

Synthesis and degradation of polyhydroxyalkanoates in Alcaligenes eutrophus

Abstract The kinetics and mechanism of the synthesis and degradation of polyhydroxyalkanoates (PHA) in Alcaligenes eutrophus have been studied. PHA polymers were accumulated in the cells in nitrogen-free mineral media containing various carbon substrates, and the accumulated PHA polymers were subsequently degraded after the carbon sources were exhausted. The number of PHA polymerase molecules per cell was determined to be 18,000. The kinetic data of poly(3-hydroxybutyrate) (P(3HB)) synthesis indicated that about two molecules of d (−)-3-hydroxybutyryl-CoA are added within 1 s into a propagating chain of P(3HB) on the active site of polymerase, and that the average lifetime of a propagating P(3HB) chain is about 1 h. The intracellular PHA depolymerase was suggested to be exo -type hydrolase. The pathway and regulation of PHA synthesis were studied using [5-¹³C]pentanoic acid as the sole carbon source.     

Synthesis of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/chitosan/silver nanocomposite material with enhanced antimicrobial activity

This work aims to shed light in the fabrication of poly(3‐hydroxybutyrate‐co‐44%‐4‐hydroxybutyrate)[P(3HB‐co‐44%4HB)]/chitosan‐based silver nanocomposite material using different contents of silver nanoparticle (SNP); 1–9 wt%. Two approaches were applied in the fabrication; namely solvent casting and chemical crosslinking via glutaraldehyde (GA). A detailed characterization was conducted in order to yield information regarding the nanocomposite material. X‐ray diffraction analysis exhibited the nature of the three components that exist in the nanocomposite films: P(3HB‐co‐4HB), chitosan, and SNP. In term of mechanical properties, tensile strength, and elongation at break were significantly improved up to 125% and 22%, respectively with the impregnation of the SNP. The melting temperature of the nanocomposite materials was increased whereas their thermal stability was slightly changed. Scanning electron microscopy images revealed that incorporation of 9 wt% of SNP caused agglomeration but the surface roughness of the material was significantly improved with the loading. Staphylococcus aureus and Escherichia coli were completely inhibited by the nanocomposite films with 7 and 9 wt% of SNP, respectively. On the other hand, degradation of the nanocomposite materials outweighed the degradation of the pure copolymer. These bioactive and biodegradable materials stand a good chance to serve the vast need of biomedical applications namely management and care of wound as wound dressing. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1469–1479, 2014     

The metalloproteinase ADAM‐12 regulates bronchial epithelial cell proliferation and apoptosis

Abstract. Objectives: The ADAMs (a disintegrin and metalloproteinase) enzymes compose a family of membrane‐bound proteins characterized by their multi‐domain structure and ADAM‐12 expression is elevated in human non‐small cell lung cancers. The aim of this study was to investigate the roles played by ADAM‐12 in critical steps of bronchial cell transformation during carcinogenesis. Materials and methods: To assess the role of ADAM‐12 in tumorigenicity, BEAS‐2B cells were transfected with a plasmid encoding human full‐length ADAM‐12 cDNA, and then the effects of ADAM‐12 overexpression on cell behaviour were explored. Treatment of clones with heparin‐binding epidermal growth factor (EGF)‐like growth factor (HB‐EGF) neutralizing antibodies as well as an EGFR inhibitor allowed the dissection of mechanisms regulating cell proliferation and apoptosis. Results: Overexpression of ADAM‐12 in BEAS‐2B cells promoted cell proliferation. ADAM‐12 overexpressing clones produced higher quantities of HB‐EGF in their culture medium which may rely on membrane‐bound HB‐EGF shedding by ADAM‐12. Targeting HB‐EGF activity with a neutralizing antibody abrogated enhanced cell proliferation in the ADAM‐12 overexpressing clones. In sharp contrast, targeting of amphiregulin, EGF or transforming growth factor‐α failed to influence cell proliferation; moreover, ADAM‐12 transfectants were resistant to etoposide‐induced apoptosis and the use of a neutralizing antibody against HB‐EGF activity restored rates of apoptosis to be similar to controls.Conclusions: ADAM‐12 contributes to enhancing HB‐EGF shedding from plasma membranes leading to increased cell proliferation and reduced apoptosis in this bronchial epithelial cell line.     

BIX‐01294 enhanced chemotherapy effect in gastric cancer by inducing GSDME‐mediated pyroptosis

Adjuvant chemotherapy in combination with surgery is expected to be a curative strategy for gastric cancer. However, drug resistance remains an obstacle in effective chemotherapy. Therefore, understanding the potential mechanisms of chemotherapy induced gastric cancer cell death is of great importance. We demonstrated that BIX‐01294 (BIX) at low concentration could induce autophagic flux by converting LC3B‐I to LC3B‐II and directly activate autophagy associated cell death in gastric cancer cell lines at high concentration. BIX at low concentration could help obtain sensitivity of gastric cancer cells to chemotherapy with significantly reduced cell viability. Interestingly, BIX combined Cis (BIX + Cis) treated SGC‐7901 cells display pyroptosis related cell death with large bubbles blown around the membrane, significantly decreased cell viability, elevated lactate dehydrogenase release and increased percentage of propidium iodide and Annexin‐V double positive cells. Furthermore, the cleavage of gasdermin E (GSDME) and caspase‐3 but not GSDMD was detected by immunoblotting and the knockout of GSDME switched pyroptosis into apoptosis in the BIX + Cis combined treated group. Furthermore, the deficiency of Beclin‐1 to inhibit BIX induced autophagic flux completely blocked BIX + Cis combined treated induced cell pyroptosis related cell death. Additionally, BIX + Cis in vivo treatment could inhibit tumor growth, which could be reversed by the deficiency of Beclin‐1 and be delayed by the deficiency of GSDME. In conclusion, our data was the first to reveal that BIX enhanced the anticancer chemotherapy effect by induced GSDME‐mediated pyroptosis through the activation of autophagic flux in gastric cancer cells.     

Quantification of heparin's antimetastatic effect by single‐cell force spectroscopy

In circulation, cancer cells induce platelet activation, leading to the formation of a cancer cell‐encircling platelet cloak which facilitates each step of the metastatic cascade. Since cancer patients treated with the anticoagulant heparin showed reduced metastasis rates and improved survival, it is supposed that heparin suppresses the cloak's formation by inhibiting the interaction between platelet's adhesion molecule P‐selectin with its ligands on cancer cells. To quantify this heparin effect, we developed a single‐cell force spectroscopy approach and quantified the adhesion (maximum adhesion force [F_A] and detachment work [W_D]) between platelets and human non‐small cell lung cancer cells (A549). A configuration was used in which A549 cells were glued to tipless cantilevers and force‐distance (F‐D) curves were recorded on a layer of activated platelets. The concentration‐response relationship was determined for heparin at concentrations between 1 and 100 U/mL. Sigmoid dose‐response fit revealed half‐maximal inhibitory concentration (IC₅₀) values of 8.01 U/mL (F_A) and 6.46 U/mL (W_D) and a maximum decrease of the adhesion by 37.5% (F_A) and 38.42% (W_D). The effect of heparin on P‐selectin was tested using anti‐P‐selectin antibodies alone and in combination with heparin. Adding heparin after antibody treatment resulted in an additional reduction of 9.52% (F_A) and 7.12% (W_D). Together, we quantified heparin's antimetastatic effect and proved that it predominantly is related to the blockage of P‐selectin. Our approach represents a valuable method to investigate the adhesion of platelets to cancer cells and the efficiency of substances to block this interaction.     

Metabolic engineering of Escherichia coli for the production of polylactic acid and its copolymers

Polylactic acid (PLA) is a promising biomass‐derived polymer, but is currently synthesized by a two‐step process: fermentative production of lactic acid followed by chemical polymerization. Here we report production of PLA homopolymer and its copolymer, poly(3‐hydroxybutyrate‐co‐lactate), P(3HB‐co‐LA), by direct fermentation of metabolically engineered Escherichia coli. As shown in an accompanying paper, introduction of the heterologous metabolic pathways involving engineered propionate CoA‐transferase and polyhydroxyalkanoate (PHA) synthase for the efficient generation of lactyl‐CoA and incorporation of lactyl‐CoA into the polymer, respectively, allowed synthesis of PLA and P(3HB‐co‐LA) in E. coli, but at relatively low efficiency. In this study, the metabolic pathways of E. coli were further engineered by knocking out the ackA, ppc, and adhE genes and by replacing the promoters of the ldhA and acs genes with the trc promoter based on in silico genome‐scale metabolic flux analysis in addition to rational approach. Using this engineered strain, PLA homopolymer could be produced up to 11 wt% from glucose. Also, P(3HB‐co‐LA) copolymers containing 55–86 mol% lactate could be produced up to 56 wt% from glucose and 3HB. P(3HB‐co‐LA) copolymers containing up to 70 mol% lactate could be produced to 46 wt% from glucose alone by introducing the Cupriavidus necator β‐ketothiolase and acetoacetyl‐CoA reductase genes. Thus, the strategy of combined metabolic engineering and enzyme engineering allowed efficient bio‐based one‐step production of PLA and its copolymers. This strategy should be generally useful for developing other engineered organisms capable of producing various unnatural polymers by direct fermentation from renewable resources. Biotechnol. Bioeng. 2010; 105: 161–171. © 2009 Wiley Periodicals, Inc.