Scaleup of ajmalicine production by plant cell cultures of Catharanthus roseus

The effect of scaleup on he production of ajmalicine by a Catharanthus roseus cell suspension culture in a selected induction medium were studied. In preliminary experiments it was observed that the culture turned brown and the production was inhibited upon transfer from a shake flask to a stirred bioreactor with forced aeration. Two factors were recognized as the potential origin of the differences between shake flask and bioreactor cultures: gas composition and mechanical shear forces. These factors were studied separately.By recirculating a large part of the exhaust gas, a comparable gas regime was obtained in a bioreactor as occurred in a shake flask cultures. This resulted in the absence of browning and a similar pattern of ajmalicine production as observed in shake flasks. The effect of shear forces could not be demonstrated. However, the experiments showed that the culture may be very sensitive to liquid phase concentrations of gaseous compounds. The effects of k(L)a, aeration rate, CO(2) production rate, and influent gas phase CO(2) concentration on the liquid phase CO(2) concentration are discussed. (c) 1993 John Wiley & Sons, Inc.     

Process performance of parallel bioreactors for batch cultivation of Streptomyces tendae

Batch cultivations of the nikkomycin Z producer Streptomyces tendae were performed in three different parallel bioreactor systems (milliliter-scale stirred-tank reactors, shake flasks and shaken microtiter plate) in comparison to a standard liter-scale stirred-tank reactor as reference. Similar dry cell weight concentrations were measured as function of process time in stirred-tank reactors and shake flasks, whereas only poor growth was observed in the shaken microtiter plate. In contrast, the nikkomycin Z production differed significantly between the stirred and shaken bioreactors. The measured product concentrations and product formation kinetics were almost the same in the stirred-tank bioreactors of different scale. Much less nikkomycin Z was formed in the shake flasks and MTP cultivations, most probably due to oxygen limitations. To investigate the non-Newtonian shear-thinning behavior of the culture broth in small-scale bioreactors, a new and simple method was applied to estimate the rheological behavior. The apparent viscosities were found to be very similar in the stirred-tank bioreactors, whereas the apparent viscosity was up to two times increased in the shake flask cultivations due to a lower average shear rate of this reactor system. These data illustrate that different engineering characteristics of parallel bioreactors applied for process development can have major implications for scale-up of bioprocesses with non-Newtonian viscous culture broths.     

Ajmalicine production by cell cultures of Catharanthus roseus: from shake flask to bioreactor

The productivity of a cell culture for the production of a secondary metabolite is defined by three factors: specific growth rate, specific product formation rate, and biomass concentration during production. The effect of scaling-up from shake flask to bioreactor on growth and production and the effect of increasing the biomass concentration were investigated for the production of ajmalicine by Catharanthus roseus cell suspensions. Growth of biomass was not affected by the type of culture vessel. Growth, carbohydrate storage, glucose and oxygen consumption, and the carbon dioxide production could be predicted rather well by a structured model with the internal phosphate and the external glucose concentration as the controlling factors. The production of ajmalicine on production medium in a shake flask was not reproduced in a bioreactor. The production could be restored by creating a gas regime in the bioreactor comparable to that in a shake flask. Increasing the biomass concentration both in a shake flask and in a stirred fermenter decreased the ajmalicine production rate. This effect could be removed partly by controlling the oxygen concentration in the more dense culture at 85% air saturation.     

Comparisons of microcarrier cell culture processes in one hundred mini-liter spinner flask and fifteen-liter bioreactor cultures

Microcarrier cell culture process can be used to culture anchorange-dependent cells in large bioreactor vessels. The process performance in large bioreactors is usually less prominent than that in spinner flask vessels and bench scale reactors. In this study we investigated the microcarrier cell culture processes in 100?ml spinner flask and 15-liter bioreactor cultures, including the kinetics for cell attachment, cell growth and the production of Japanese encephaltilis vaccine strain (Beijing-1) virus. Under a fixed concentration of microcarrier and cell density used in inoculations, the attachment kinetics of Vero cells on Cytodex 1 microcarrier in a 15-liter bioreactor vessel was 2 folds slower than with 100?ml spinner flask culture. Virus replication in 15-liter bioreactor culture also revealed an approximately one day lag-time compared to 100?ml spinner flask culture. Findings presented herein provide valuable information for designing and operating microcarrier cell culture processes in large bioreactor vessels.     

Technological problems in cultivation of plant cells at high density. Reprinted from Biotechnology and Bioengineering, Vol. XXII, No. 6, Pages 1203-1218 (1981)

Using Cudrania tricuspidata cells as model plant cells which have high sensitivity to hydrodynamic stress, technological problems in the cultivation of the plant cells at high density were investigated. Using "shake" flasks on a reciprocal shaker and Erlenmeyer flasks on a rotary shaker and with a high supply of oxygen in order to obtain high cell densities in shaken cultures, particle breakdown and damage to the largest cell aggregate group (above 1981 microm in diameter) occurred and normal cell growth became impeded. The mass-transfer coefficient (K) for a model solid-liquid system (beta-naphthol particles and water) in place of a system of plant cells and a liquid medium was proposed as an intensity index of hydrodynamic stress effects on plant cells in suspension cultures under various conditions in the bioreactor systems. Normal cell growth was obtained under culture conditions for K values less than about 4.4 x 10(-3) cm/sec. The characteristics of various bioreactors used until now were investigated by considering the three main technological factors (capacity of oxygen supply, intensity of hydrodynamic stress effects on plant cells, and intensity of culture broth mixing and air-bubble dispersion). The most suitable bioreactor for culturing plant cells at high density was a jar fermentor with a modified paddle-type impeller (J-M). The yield of cell mass in the 10-liter J-M (working volume 5 liter) was about 30 g dry weight per liter of medium.     

Application of an improved continuous parallel shaken bioreactor system for three microbial model systems

A continuous parallel shaken bioreactor system, combining the advantages of shaken bioreactors with the advantages of continuous fermentation, was specifically manufactured from quartz glass and provides a geometric accuracy of <1 mm. Two different model systems (facultative anaerobic bacterium C. glutamicum, and Crabtree-negative yeast P. stipitis), whose growth behaviour and metabolite formation are affected by dilution rate and oxygen availability, were studied. The transition from non-oxygen to limited conditions as function of the dilution rate could precisely be predicted applying the approach described by Maier et al. (Biochem Eng J 17:155–167, 2004). In addition, the Crabtree-positive yeast S. cerevisiae was simultaneously studied in the continuous parallel shaken bioreactor system and in a conventional 1-L bioreactor, for comparison. Essentially the same results were obtained in both types of bioreactors. However, many more reading points were obtained with the parallel shaken bioreactor system in the same time at much lower consumption of culture media.     

Technological problems in cultivation of plant cells at high density

Using Cudrania tricuspidata cells as model plant cells which have high sensitivity to hydrodynamic stress, technology problems in the cultivation of the plant cells at high density were investigated. Using “shake” flasks on a reciprocal shaker and Erlenmeyer flasks on a rotary shaker and with a high supply of oxygen on order to obtain high cell densities in shaken cultures, particles breakdown and damage to the largest cell aggregate group (above 1981 μm in diameter) occurred and normal cell growth became impeded. The mass-transfer coefficient (K)for a model solid–liquid system (β-naphthol particles and water) in place of a system of plant cells and a liquid medium was proposed as an intensity index of hydrodynamic stress effects on plant cells in subsequent cultures under various conditions in the bioreactor systems. Normal cell growth was obtained under culture conditions for K values less than about 4.4 × 10^?3 cm/sec. The characteristics of various bioreactors used until now were investigated by considering the three main technological factors (capacity of oxygen supply, intensity of hydrodynamic stress effects on plant cells, and intensity of culture broth mixing and air-bubble desperation). The most suitable bioreactor for culturing plant cells at high density was ajar fermentor with a modified paddle-type impeller (J-M). The yield of cell mass in the 10-liter J-M (working volume 5 liter) was about 30 g dry weight per liter of medium.     

Statistical media optimization and production of ITS alpha-amylase from Aspergillus oryzae in a bioreactor

The production of an intermediate temperature-stable (ITS) α-amylase from Aspergillus oryzae was studied by using a central composite design with three independent variables, viz., starch, yeast extract, and K₂HPO₄. The model equation provided a suitable model for the response surface for α-amylase production, and, from the optimal concentrations of the medium components, a model was predicted, which was then used for enzyme production in a 150-L bioreactor. In the bioreactor studies, the enzyme yields (161 U/ml) were similar to that of the shake flask (133 U/ml); however, the time required for maximum α-amylase production in the bioreactor was reduced to 48 h compared with 120 h in shake flask cultures. An increased level of phosphate in the medium and low inoculum size were necessary to control the excessive foaming in the bioreactor; however, control of the pO₂ level and agitation was not mandatory for enzyme production. The peak enzyme production coincided with the increase in pH of the fermentation broth and was maximal when the pH of the system was above 7.5. Thus, in the present study, pH acted as an indicator of the initiation or end of the enzyme synthesis or of the fermentation cycle. Received: 20 November 2001 / Accepted 31 December 2001     

Disposable orbitally shaken TubeSpin bioreactor 600 for Sf9 cell cultivation in suspension

Disposable orbitally shaken TubeSpin bioreactor 600 tubes (TS600s) were recently developed for the bench-scale cultivation of animal cells in suspension. Here we compared batch cultures of Sf9 insect cells in TS600s, spinner flasks, and shake flasks. Superior cell growth was observed in TS600s and shake flasks as compared with spinner flasks, and more favorable oxygen-enriched cell culture conditions were observed in TS600s as compared with either spinner or shake flasks. The results demonstrated the suitability of TS600s as a disposable vessel for the cultivation of Sf9 cells in suspension.     

Cultural stability ofStreptomyces fradiae in the production of xylose isomerase: studies in shake flasks

Comprehensive studies of pure colonies of Streptomyces fradiae in the production of xylose isomerase by submerged fermentation at shake flask level revealed poor culture stability with respect to enzyme production, biomass formation, degree of pigmentation, quantity of glucose and xylose utilization, level of enzyme in cell-free culture broth and final pH of the fermentation medium. The results serve to stress obligatory evaluation of culture stability of Streptomyces strains in determining their suitability for use in developing fermentation processes for commercial exploitation.     

Combined dissolved oxygen tension and online viscosity measurements in shake flask cultivations via infrared fluorescent oxygen-sensitive nanoparticles

Oxygen supply is one of the most critical process parameters in aerobic cultivations. To assure sufficient oxygen supply, shake flasks are usually used in combination with orbital shaking machines. In this study, a measurement technique for the dissolved oxygen tension (DOT) in shake flask cultures with viscosity changes is presented. The movement of the shaker table is monitored by means of a Hall effect sensor. For DOT measurements, infrared fluorescent oxygen-sensitive nanoparticles are added to the culture broth. The position of the rotating bulk liquid needs to be determined to assure measurements inside the liquid. The leading edge of the bulk liquid is detected based on the fluorescence signal intensity of the oxygen-sensitive nanoparticles. Furthermore, online information about the viscosity of the culture broth is acquired due to the detection of the position of the leading edge of the bulk liquid relative to the direction of the centrifugal force, as described by Sieben et al. (2019. Sci. Rep., 9, 8335). The DOT measurement is combined with a respiration activity monitoring system which allows for the determination of the oxygen transfer rate (OTR) in eight parallel shake flasks. Based on DOT and OTR, the volumetric oxygen transfer coefficient (k_La) is calculated during cultivation. The new system was successfully applied in cultivations of Escherichia coli, Bacillus licheniformis, and Xanthomonas campestris.     

假蜜环菌发酵工艺的优化研究

目前,国内普遍采用亮菌固体发酵工艺生产亮菌制剂。采用小型发酵罐液体深层发酵和液体静置发酵对亮菌发酵工艺进行优化研究。液体深层发酵采用28℃,200 r/min,通气量1∶1 v/v·m,培养7 d,亮菌干重为16.55g/L,其中菌丝体中多糖含量为5.42%,蛋白含量为1.75%;液体静置发酵采用500 mL三角瓶,28℃,150 r/min,摇瓶3 d后静置发酵14 d,亮菌干重可达10.69 g/L,发酵液中多糖含量为1.016 g/L,蛋白含量为0.320 g/L。对液体静置发酵进一步研究发现其发酵液中亮菌甲素含量可达3.118 mg/L。由此可见,两种发酵方式在保证生物量和活性成分的前提下,缩短了发酵周期,均优于传统的固体发酵工艺,值得工业生产借鉴。     

Ergosterol production from molasses by genetically modified <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Ergosterol is an economically important metabolite produced by fungi. Recombinant Saccharomyces cerevisiae YEH56(pHXA42) with increased capacity of ergosterol formation was constructed by combined overexpression of sterol C-24(28) reductase and sterol acyltransferase in the yeast strain YEH56. The production of ergosterol by this recombinant strain using cane molasses (CM) as an inexpensive carbon source was investigated. An ergosterol content of 52.6 mg/g was obtained with 6.1 g/l of biomass from CM medium containing 60 g/l of total sugar in 30 h in shake flask. The ergosterol yield was enhanced through the increasing cell biomass by supplementation of urea to a concentration of 6 g/l in molasses medium. Fermentation was performed in 5-l bioreactor using the optimized molasses medium. In batch fermentation, the effect of agitation velocity on ergosterol production was examined. The highest ergosterol yield was obtained at 400 rpm that increased 60.4 mg/l in comparison with the shake flask culture. In fed-batch fermentation, yeast cells were cultivated, firstly, in the starting medium containing molasses with 20 g/l of total sugar, 1.68 g/l of phosphate acid, and 6 g/l of urea (pH 5.4) for 5 h, then molasses containing 350 g/l of total sugar was fed exponentially into the bioreactor to keep the ethanol level in the broth below 0.5%. After 40 h of cultivation, the ergosterol yield reached 1,707 mg/l, which was 3.1-fold of that in the batch fermentation.     

海洋中海藻糖产生菌的筛选及发酵条件优化

从180余份海水、海泥样品中筛选得到60株产海藻糖较高的菌株,编号为2-14的菌株海藻糖产量最高,为127.9mg/g cell。对2-14菌株进行形态特征、培养特征及生理生化试验,鉴定该菌株为红酵母属(Rhodotorula sp.)。研究摇瓶发酵条件对红酵母海藻糖产量的影响,结果为:初始pH5.5,发酵温度28℃,装液量75mL(250mL三角瓶中)。采用优化后发酵条件红酵母海藻糖产量为193.3mg/g cell,优化前对照值为132.1mg/g cell,优化后的结果是优化前的1.46倍。在5L发酵罐中培养得到最佳发酵时间为54h,发酵罐培养发酵液中海藻糖含量最高达2.5g/L,为摇瓶培养的1.6倍。     

Improved processes for the production and isolation of dynemicin A and large-scale fermentation in a 10000-liter fermentor

Summary Supplementing the culture ofMicromonospora chersina sp. nov. No. M956-1 with NaI (0.5 mg/l) enhanced the production of dynemicin A by 35-fold in shake flask culture. Homogeneous dynemicin A was obtained from the whole broth extract by Dicalite chromatography, Sephadex LH-20 chromatography and vacuum liquid chromatography. Gram quantities of dynemicin A were obtained from the fermentation ofM. chersina sp. nov. No. M956-1 in a 10000-liter fermentor.     

Production of anthraquinones by immobilized Frangula alnus Mill. plant cells in a four-phase air-lift bioreactor

 The production of anthraquinones by Frangula alnus Mill. plant cells was used as a model system to evaluate the performance of a liquid-liquid extractive product-recovery process. The shake flask experiments have shown higher production of anthraquinones in cell suspension and flask cultures of calcium-alginate-immobilized cells when silicone oil was incorporated into the medium, compared to a control without silicone oil. An external-loop air-lift bioreactor, developed and designed for the production and simultaneous extraction of extracellular plant cell products, was regarded as a four-phase system, with dispersed gas, non-aqueous solvent and calcium-alginate-immobilized plant cells in Murashige and Skoog medium. Continuous extraction of anthraquinones by silicone oil and n-hexadecane inside the bioreactor resulted in 10–30 times higher cell productivity, compared to that of immobilized cells in a flask. Based on the mixing pattern, immobilized biocatalyst extraparticle and intraparticle diffusional constraints and the kinetics of growth, substrate consumption and product formation, a mathematical model was developed to describe the time course of a batch plant cell culture. The model showed satisfactory agreement with four sets of shake flask experiments and three bioreactor production cycles. Received: 18 March 1994/Received revision: 20 September 1994/Accepted: 28 September 1994     

Investigation of vinegar production using a novel shaken repeated batch culture system

Nowadays, bioprocesses are developed or optimized on small scale. Also, vinegar industry is motivated to reinvestigate the established repeated batch fermentation process. As yet, there is no small‐scale culture system for optimizing fermentation conditions for repeated batch bioprocesses. Thus, the aim of this study is to propose a new shaken culture system for parallel repeated batch vinegar fermentation. A new operation mode — the flushing repeated batch — was developed. Parallel repeated batch vinegar production could be established in shaken overflow vessels in a completely automated operation with only one pump per vessel. This flushing repeated batch was first theoretically investigated and then empirically tested. The ethanol concentration was online monitored during repeated batch fermentation by semiconductor gas sensors. It was shown that the switch from one ethanol substrate quality to different ethanol substrate qualities resulted in prolonged lag phases and durations of the first batches. In the subsequent batches the length of the fermentations decreased considerably. This decrease in the respective lag phases indicates an adaptation of the acetic acid bacteria mixed culture to the specific ethanol substrate quality. Consequently, flushing repeated batch fermentations on small scale are valuable for screening fermentation conditions and, thereby, improving industrial‐scale bioprocesses such as vinegar production in terms of process robustness, stability, and productivity. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1158–1168, 2013     

Fermentation of lactose to ethanol with recombinant yeast in an immobilized yeast membrane bioreactor

A novel concept of membrane bioreactor in which living cells are sandwiched between ultrafiltration (UF) and reverse osmosis (RO) membranes was applied for lactose fermentation to ethanol by genetically engineered yeast cells. The productivity of the Lactophile 13B strains was higher than that of the Lactophile 13D strains. In both cases performance data similar to those for glucose fermentation to ethanol by Saccharomyces cerevisiae were obtained. However, the operational stability of recombinant yeast cells was improved in the new bioreactor in comparison to the stability of these cells in a shake flask.     

Scale-up of biotransformation process in stirred tank reactor using dual impeller bioreactor

The gas-liquid mass transfer coefficient K(L)a in the fermenter is a strong function of mode of energy dissipation and physico-chemical properties of the liquid media. A combination of disc turbine (DT) and pitched blade turbine down flow (PTD) impellers has been tested in laboratory bioreactor for gas hold-up and gas-liquid mass transfer performance for the growth and biotransformation medium for an yeast isolate VS1 capable of biotransforming benzaldehyde to L-phenyl acetyl carbinol (L-PAC) and compared with those in water.Correlations have been developed for the prediction of the fractional gas hold-up and gas-liquid mass transfer coefficient for the above media. The mass transfer coefficient and respiration rate have been determined in the shake flask for the growth as well as for biotransformation medium. These results, then have been used to optimize the operating parameters (impeller speed and aeration) for growth and biotransformation in a laboratory bioreactor. The comparison of cell mass production and L-PAC production in the bioreactor has been done with that obtained in shake flask studies.     

生防菌Ⅲ-61抗真菌活性产物的摇瓶发酵

对生防链霉菌Ⅲ-61产生抗真菌活性物质的摇瓶发酵工艺进行了研究。利用正交试验设计优化了发酵培养基组分,其最适配方为黄豆粉1．5％,蛋白胨0．3％,蔗糖1．0％,淀粉1．3％,磷酸二氢钾0．02％,硫酸镁0．025％,氯化钠0．5％,配咸水溶液,调pH至7～7．4,加碳酸钙1％。通过单因素试验,筛选获得了最优培养条件组合：液体种龄24h,接种量5％～10％,500mL摇瓶培养基装量为80mL,摇床转速240r／min,培养温度31℃,发酵周期96～120h。此优化的发酵培养基与发酵条件的组合昕得菌株Ⅲ-61发酵液对主要靶标黄瓜灰霉病菌的抑菌圈直径达49．5mm,较优化前提高了45．59％。