Immunodiffusion method for detection of type A Clostridium botulinum.

A simple gel immunodiffusion agar procedure was developed for detecting toxigenic strains of Clostridium botulinum type A. The method consisted of overlaying colonies grown on thin-layer tryptone-peptone-glucose-yeast extract agar with gel diffusion agar containing desired levels of C. botulinum type A antitoxin. Concentric precipitin zones formed around colonies of C. botulinum type A. Strains of C. botulinum type A were detected by this procedure. However, C. botulinum type B reacted to a lesser degree with this system. No reaction was noted with types E, F, Langeland, F8G, Clostridium perfringens, or with strains of nontoxigenic Clostridium sporogenes. Thickness of the plating medium, incubation time and temperature, environmental growth conditions, and levels of both agar an antitoxin were important factors affecting the efficiency of the procedure, whereas the age of the culture (used as inoculum) was not critical. Thin agar medium (5 ml per plate [15 by 100 mm]) containing 1.5% agar gave consistent results, but more agar limited diffusion, and lower levels encouraged spreaders. The optimal concentration of antitoxin incorporated in to the gel diffusion agar overlay was 1.2 IU/ml gel diffusion agar. Rabbit type A antitoxin prepared with purer immunizing agent gave similar reactions. The addition of type A antitoxin in tryptone-peptone-glucose-yeast extract agar medium before inoculation with type A C. botulinum showed promising results.     

Selective and differential medium for detecting Clostridium botulinum.

A selective and differential growth medium was developed for detection of Clostridium botulinum types A, B, and F. The medium consisted of peptone-glucose-yeast extract agar supplemented with cycloserine, 250 micrograms/ml; sulfamethoxazole, 76 micrograms/ml; and trimethoprim, 4 micrograms/ml as selective inhibitors and various types and levels of botulinal antibodies for type differentiation in the immunodiffusion reaction. Growth of proteolytic types of C. botulinum were not affected by the incorporation of the selective agents, but some nonproteolytic types were suppressed. Cross-reactions between types A and B were visually distinguishable, whereas cross-reactions between type F and Clostridium sporogenes did not occur at the optimum antibody titer. Optimum antibody titer varied with toxin type. The proposed selective differential medium should be valuable in isolating and typing of proteolytic C. botulinum types A, B, and F from samples containing mixed microbial populations.     

Selective and differential medium for detecting Clostridium botulinum

A selective and differential growth medium was developed for detection of Clostridium botulinum types A, B, and F. The medium consisted of peptone-glucose-yeast extract agar supplemented with cycloserine, 250 micrograms/ml; sulfamethoxazole, 76 micrograms/ml; and trimethoprim, 4 micrograms/ml as selective inhibitors and various types and levels of botulinal antibodies for type differentiation in the immunodiffusion reaction. Growth of proteolytic types of C. botulinum were not affected by the incorporation of the selective agents, but some nonproteolytic types were suppressed. Cross-reactions between types A and B were visually distinguishable, whereas cross-reactions between type F and Clostridium sporogenes did not occur at the optimum antibody titer. Optimum antibody titer varied with toxin type. The proposed selective differential medium should be valuable in isolating and typing of proteolytic C. botulinum types A, B, and F from samples containing mixed microbial populations.     

The effect of recovery medium on the estimated heat-inactivation of spores of non-proteolytic Clostridium botulinum

Heating spores of non-proteolytic strains of Clostridium botulinum at 85°C, followed by enumeration of survivors on a highly nutrient medium indicated a 5 decimal kill in less than 2 min. The inclusion of lysozyme or egg yolk emulsion in the recovery medium substantially increased apparent spore heat-resistance, with as little as 0.1 μg lysozyme/ml sufficient to give an increase in the number of survivors. After heating at 85°C for 2 min between 0.1% and 1% of the spores of 11 strains (5 type B, 4 type E, 2 type F) formed colonies on medium containing 10 μg lysozyme/ml. Enumeration of survivors on a medium containing lysozyme showed that heating at 85°C for 5 min resulted in an estimated 2.6 decimal kill of spores of strain 17B (type B). These findings are important in the assessment of heat-treatments required to ensure the safety with respect to non-proteolytic Clostridium botulinum of processed (pasteurized) refrigerated foods for extended storage such as sous-vide foods.     

Development of a combined selection and enrichment PCR procedure for Clostridium botulinum Types B, E, and F and its use to determine prevalence in fecal samples from slaughtered pigs

A specific and sensitive combined selection and enrichment PCR procedure was developed for the detection of Clostridium botulinum types B, E, and F in fecal samples from slaughtered pigs. Two enrichment PCR assays, using the DNA polymerase rTth, were constructed. One assay was specific for the type B neurotoxin gene, and the other assay was specific for the type E and F neurotoxin genes. Based on examination of 29 strains of C. botulinum, 16 strains of other Clostridium spp., and 48 non-Clostridium strains, it was concluded that the two PCR assays detect C. botulinum types B, E, and F specifically. Sample preparation prior to the PCR was based on heat treatment of feces homogenate at 70 degrees C for 10 min, enrichment in tryptone-peptone-glucose-yeast extract broth at 30 degrees C for 18 h, and DNA extraction. The detection limits after sample preparation were established as being 10 spores per g of fecal sample for nonproteolytic type B, and 3.0 x 10(3) spores per g of fecal sample for type E and nonproteolytic type F with a detection probability of 95%. Seventy-eight pig fecal samples collected from slaughter houses were analyzed according to the combined selection and enrichment PCR procedure, and 62% were found to be PCR positive with respect to the type B neurotoxin gene. No samples were positive regarding the type E and F neurotoxin genes, indicating a prevalence of less than 1.3%. Thirty-four (71%) of the positive fecal samples had a spore load of less than 4 spores per g. Statistical analysis showed that both rearing conditions (outdoors and indoors) and seasonal variation (summer and winter) had significant effects on the prevalence of C. botulinum type B, whereas the effects of geographical location (southern and central Sweden) were less significant.     

Colony immunoblot assay of botulinal toxin.

Botulinal neurotoxin in and around colonies of Clostridium botulinum types A, B, and E and of toxigenic Clostridium butyricum was detected by an enzyme-linked immunoassay procedure whereby the toxin was transferred from the agar medium to a nitrocellulose support and the immobilized toxin was probed with type-specific antibodies. The method identified the toxin types of the colonies grown from a mixed inoculum of C. botulinum serotypes. The specificity of the antitoxins for type A and B toxins was improved by adsorption of the antitoxins with the antigens of heterologous type cultures.     

Development of a Selective Medium for the Isolation of Clostridium sporogenes and Related Organisms

An attempt was made to develop a selective isolation medium for Clostridium sporogenes and related organisms based on the ability of these organisms to obtain their energy for growth by means of coupled oxidation-reduction reactions between appropriate pairs of amino acids (Stickland reaction). Using a semi-defined basal medium containing various combinations of amino acids, it was found that Cl. sporogenes utilized a wider range of amino acid pairs than strains of five other species of clostridia known to carry out a Stickland-type fermentation.
With alanine and proline as the principal energy sources and the medium solidified with agar. it was shown that reference strains of Cl. sporogenes and proteolytic Cl. botulinum types A, B and F could be recovered almost quantitatively, with or without prior heating at 80 °C for 10 min. By contrast, growth of test strains of Streptococcus faecalis, Strep. faecium , 'saccharolytic' Cl. botulinum types B, C, D, E and F and 'proteolytic' strains of types C and D was suppressed on this medium, as were strains of 26 other species of clostridia.
Addition of 50 μg/ml of polymyxin to the agar medium had no detectable effect on the recovery of Cl. sporogenes or Cl. botulinum. When samples of soil and mud were plated on the antibiotic-containing medium, 63.1% of 225 isolates thus obtained were identified as Cl. sporogenes/botulinum.     

Recovery of spores of Clostridium botulinum in yeast extract agar and pork infusion agar after heat treatment.

Yeast extract agar, pork infusion agar, and modifications of these media were used to recover heated Clostridium botulinum spores. The D- and z-values were determined. Two type A strains and one type B strain of C. botulinum were studied. In all cases the D-values were largest when the spores were recovered in yeast extract agar, compared to the D-values for spores recovered in pork infusion agar. The z-values for strains 62A and A16037 were largest when the spores were recovered in pork infusion agar. The addition of sodium bicarbonate and sodium thioglycolate to pork infusion agar resulted in D-values for C. botulinum 62A spores similar to those for the same spores recovered in yeast extract agar. The results suggest that sodium bicarbonate and sodium thioglycolate should be added to recovery media for heated C. botulinum spores to obtain maximum plate counts.     

Recovery of spores of Clostridium botulinum in yeast extract agar and pork infusion agar after heat treatment.

Yeast extract agar, pork infusion agar, and modifications of these media were used to recover heated Clostridium botulinum spores. The D- and z-values were determined. Two type A strains and one type B strain of C. botulinum were studied. In all cases the D-values were largest when the spores were recovered in yeast extract agar, compared to the D-values for spores recovered in pork infusion agar. The z-values for strains 62A and A16037 were largest when the spores were recovered in pork infusion agar. The addition of sodium bicarbonate and sodium thioglycolate to pork infusion agar resulted in D-values for C. botulinum 62A spores similar to those for the same spores recovered in yeast extract agar. The results suggest that sodium bicarbonate and sodium thioglycolate should be added to recovery media for heated C. botulinum spores to obtain maximum plate counts.     

Agar Concentration in Counting Clostridium Colonies

Decreasing the agar concentration of a counting medium from the usual 1.5% resulted in larger colonies with less interference from gas in Clostridium botulinum 115B and C. sporogenes PA 3679. Optimal agar concentration was 0.65% for C. botulinum with 24-hr incubation and 0.50% for C. sporogenes with 48-hr incubation. Lower concentrations yielded growth too diffuse for counting. Motility was considered the explanation for increased colony size in softer agar. The greater the degree of motility, the greater would be the diffusibility expected, and thus the higher the agar concentration required to insure discrete colonies. For quantitating motility, evaluations were made by use of microscopic examination of liquid cultures and rate of diffusion in a semisolid medium. With both criteria, the degree of motility of C. botulinum 115B clearly exceeded that of C. sporogenes PA 3679. Small-colony variants of C. botulinum in 0.65% agar yielded only small colonies on subculture, with a corresponding decrease in degree of motility of the cells by both criteria. Colony size of the nonmotile C. perfringens ATCC 3624 was unaffected by lowered agar concentrations.     

Production of toxin by Clostridium botulinum type A strains cured by plasmids.

Twelve strains of Clostridium botulinum type A and seven strains of Clostridium sporogenes were screened for plasmids by agarose gel electrophoresis of cleared lysates of cells from 5 ml of mid-log-phase culture. Nine type A strains had one or more plasmids of 4.3, 6.8, or 36 megadaltons (MDa); several strains showed a large plasmid of 61 MDa, but it was not consistently recovered. Four C. sporogenes strains had one or more plasmids of 4.3, 5.6 or 36 MDa. Isolates obtained from cultures of plasmid-containing C. botulinum type A strains grown in ionic detergent broth and from spontaneously arising variants were screened both for toxin production and for plasmid content. Toxigenicity of C. botulinum could not be correlated with the presence of any one plasmid.     

Production of toxin by Clostridium botulinum type A strains cured by plasmids

Twelve strains of Clostridium botulinum type A and seven strains of Clostridium sporogenes were screened for plasmids by agarose gel electrophoresis of cleared lysates of cells from 5 ml of mid-log-phase culture. Nine type A strains had one or more plasmids of 4.3, 6.8, or 36 megadaltons (MDa); several strains showed a large plasmid of 61 MDa, but it was not consistently recovered. Four C. sporogenes strains had one or more plasmids of 4.3, 5.6 or 36 MDa. Isolates obtained from cultures of plasmid-containing C. botulinum type A strains grown in ionic detergent broth and from spontaneously arising variants were screened both for toxin production and for plasmid content. Toxigenicity of C. botulinum could not be correlated with the presence of any one plasmid.     

Purification of Clostridium botulinum Type F Progenitor Toxin

Clostridium botulinum type F progenitor toxin was purified to a homogeneous state as judged by gel filtration on Sephadex G-200, ultracentrifugation, and disc electrophoresis. The sedimentation constant, corrected to water at 20 C, of type F progenitor toxin was determined to be 10.3 and the molecular weight to be 235,000 by ultracentrifugation at pH 6.0. The purified toxin contained a toxicity of 1.2 x 10(8) 50% lethal doses/mg of N. In agar gel double diffusion, it formed two precipitin lines at pH 6.0. The progenitor toxin of type F differs from that of type A in that it contains no hemagglutinin and from that of type E in that it is not activable.     

Isolation of Clostridium botulinum type G from Swiss soil specimens by using sequential steps in an identification scheme.

After Clostridium botulinum type G organisms and toxin were identified in necropsy specimens in cases of unexplained death in adults and infants (O. Sonnabend, W. Sonnabend, R. Heinzle, T. Sigrist, R Dirnhofer, and U. Krech, J. Infect. Dis. 143:22-27, 1981), extensive research to detect C. botulinum type G in soil samples from Switzerland was done. A total of 41 specimens from virgin soil and from cultivated land were examined for the presence of C. botulinum type G and other toxin types. Because of the lack of the lipase marker in type G, the detection of C. botulinum type G was based on the demonstration of type G organisms in enrichment cultures by a type G-specific enzyme-linked immunosorbent assay to detect both the type G toxin and antigen; enrichment cultures in which type G toxin or antigen was identified by enzyme-linked immunosorbent assay were then tested by a type G-specific gel immunodiffusion agar procedure. This method not only isolated strains of type G but also strains of Clostridium subterminale, a nontoxigenic variant of C. botulinum type G. As a consequence of the observed cross-reactions caused by strains of C. subterminale within this test system, all isolates of type G had to be definitively confirmed by mouse bioassay. The sequential steps of these methods seem to be very useful for detecting C. botulinum type G organisms. C. botulinum type G strains were isolated in five soil samples from different locations in close association with cultivated land.(ABSTRACT TRUNCATED AT 250 WORDS)     

Isolation of Clostridium botulinum type G from Swiss soil specimens by using sequential steps in an identification scheme

After Clostridium botulinum type G organisms and toxin were identified in necropsy specimens in cases of unexplained death in adults and infants (O. Sonnabend, W. Sonnabend, R. Heinzle, T. Sigrist, R Dirnhofer, and U. Krech, J. Infect. Dis. 143:22-27, 1981), extensive research to detect C. botulinum type G in soil samples from Switzerland was done. A total of 41 specimens from virgin soil and from cultivated land were examined for the presence of C. botulinum type G and other toxin types. Because of the lack of the lipase marker in type G, the detection of C. botulinum type G was based on the demonstration of type G organisms in enrichment cultures by a type G-specific enzyme-linked immunosorbent assay to detect both the type G toxin and antigen; enrichment cultures in which type G toxin or antigen was identified by enzyme-linked immunosorbent assay were then tested by a type G-specific gel immunodiffusion agar procedure. This method not only isolated strains of type G but also strains of Clostridium subterminale, a nontoxigenic variant of C. botulinum type G. As a consequence of the observed cross-reactions caused by strains of C. subterminale within this test system, all isolates of type G had to be definitively confirmed by mouse bioassay. The sequential steps of these methods seem to be very useful for detecting C. botulinum type G organisms. C. botulinum type G strains were isolated in five soil samples from different locations in close association with cultivated land.(ABSTRACT TRUNCATED AT 250 WORDS)     

Factors affecting growth from heat-treated spores of non-proteolytic Clostridium botulinum

Heat treatment of spores of non-proteolytic Clostridium botulinum at 85°C for 120 min followed by enumeration of survivors on a medium containing lysozyme resulted in a 4.1 and 4.8 decimal reduction in numbers of spores of strains 17B (type B) and Beluga (type E), respectively. Only a small proportion of heated spores formed colonies on medium containing lysozyme; this proportion could be increased by treatments designed to increase the permeability of heated spores. The results indicate that the germination system in spores of non-proteolytic Cl. botulinum was destroyed by heating, that lysozyme could replace this germination system, and that treatments that increased the permeability of the spore coat could increase the proportion of heated spores that germinated on medium containing lysozyme. These results are important in relation to the assessment of heat-treatments required to reduce the risk of survival and growth of non-proteolytic Clostridium botulinum in processed (pasteurized) refrigerated foods for extended storage.     

Properties of F′ Factor Deoxyribonucleic Acid Transferred from Ultraviolet-Irradiated Donors: Photoreactivation in the Recipient and the Influence of recA, recB, recC, and uvr Genes

The bacteriocin, boticin E, was produced by only a few strains of those clostridia which are nontoxigenic but otherwise identical to Clostridium botulinum type E. Boticin preparations from four different strains had identical spectra against indicator cultures. Experiments with bacterial lawns showed boticin to be sporostatic for all tested nonproteolytic C. botulinum (types B, E, and F) and nontoxigenic type E-related strains which included the producing strains as well as those different from type E in the fermentation of one to three carbohydrates. Boticin had no detectable effect on vegetative cells of boticinogenic strains but killed those of all other strains whose spores were sensitive. Cultures that were growing in an agar medium were more sensitive to the bacteriocin than those growing in broth. Vegetative cells of indicator strains adsorbed boticin, but cells of a boticin-resistant mutant did not. Boticin did not lyse suspensions of vegetative cells which had been killed previously by exposure to air but lysed actively growing protoplasts and L-forms of a strain whose normal vegetative cells are susceptible to lysis. Sporostasis resulted from inhibition of germination rather than of outgrowth. Proteolytic strains of C. botulinum (types A, B, and F) were resistant to boticin E.     

Proteolytic mutants obtained from Clostridium botulinum type E.

Proteolytic mutants were isolated from toxigenic strains of Clostridium botulinum type E after several transfers. When these cultures were plated on blood agar, almost all of the colonies obtained were proteolytic, and there were fewer toxigenic colonies than nontoxigenic colonies. The proteolytic mutants and nonproteolytic original strains were different in their biological properties.     

PCR and gene probe identification of botulinum neurotoxin A-, B-, E-, F-, and G-producing Clostridium spp. and evaluation in food samples.

A degenerate primer pair was selected to amplify specifically a 260-bp DNA fragment from Clostridium botulinum types A, B, E, F, and G, and five individual probes allowed identification of each toxinotype by hybridization of the PCR products. The 72 strains of different Clostridium species tested and 11 other bacterial species commonly found in food samples gave an amplification product. This assay was able to detect 1 C. botulinum type A or B and 10 C. botulinum type E strains per reaction. With 184 artificially contaminated food samples, after an 18-h enrichment step, the sensitivity was 10 bacteria per g of sample and the correlation with the mouse bioassay reached 95.6%.     

Correlation of Clostridium botulinum type C antitoxin titers in mink and guinea pigs to protection against type C intoxication in mink

In USA, the potency of commercial vaccines containing Clostridium botulinum type C toxoid is determined by a mink vaccination-challenge assay outlined in the Code of Federal Regulations, Title 9, Part 113.110. A more humane potency test is desired, and this study provides preliminary data in support of a serological assay that correlates post-vaccination antitoxin titers of guinea pigs to vaccine efficacy in mink. Mink and guinea pigs were injected with varying dilutions of a vaccine containing C. botulinum type C toxoid. Blood samples were collected from each animal prior to challenging the mink with type C toxin. Serum antitoxin titers of mink and guinea pigs were measured by a mouse protection test, and the results were compared to the outcome of the toxin challenge in mink. A dose-dependent antitoxin response was observed in guinea pigs vaccinated with the critical dilutions of vaccine bracketing the minimum protective dose in mink. These preliminary data suggest that it may be possible to correlate post-vaccination antitoxin titers in guinea pigs to vaccine efficacy in mink. This correlation could be used as the basis for a more humane potency test for C. botulinum type C toxoids.