Azo dye decolorization by a laccase/mediator system in a membrane reactor: enzyme and mediator reusability

This paper presents the use of a membrane-integrated reactor system with recycling of laccase and mediator for azo dye decolorization. From initial screening of different laccases and mediators, Trametes versicolor laccase and syringaldehyde provided the best system for decolorization. Decolorization yields of 98, 88, 80 and 78% were obtained for Red FN-2BL, Red BWS, Remazol Blue RR and Blue 4BL, respectively. The reaction parameters were optimized and a membrane reactor was set up for dye decolorization in batch mode with reuse of the enzyme. Between 10 and 20 batches could be run with decolorization yields from 95 to 52% depending on the dye type. To study the possibility of reusing both enzyme and mediator, the reactor was run using 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) coupled to polyethylene glycol (PEG). Nine batches were run for the treatment of Remazol Blue RR, providing decolorization yields of 96-78%. Cost analysis of the processes showed that the costs of laccase/syringaldehyde or laccase/TEMPO were almost equal when running 20 batches, but the cost for the PEG-TEMPO was higher. However, the advantages associated with reuse of the mediator should motivate further development of the concept.     

Enhanced delignification of mixed wood pulp by <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis> laccase mediator system

An environmentally sound biobleaching to get high quality paper pulp from mixed wood pulp was attempted employing laccase from Aspergillus fumigatus VkJ2.4.5 for lignin removal. Laccase treatment was performed in the presence of a mediator N-hydroxybenzotriazole (HBT, 1.5% w/w), resulting into notably higher level of delignification of the pulp. Enzyme at 10 Ug⁻¹ of pulp at 50°C, pH 6.0, for 2 h with a pulp consistency of 10% was found suitable for enabling maximum decrease in the kappa number. The kappa number and yellowness decreased by 14 and 4% whereas ISO brightness improved by 7%. The presence of a characteristic peak at 280 nm indicated the presence of lignin in the effluent during biobleaching. Analysis of FTIR spectra of residual lignin revealed characteristic modifications following enzymatic bleaching by laccase mediator system (LMS). Variations in morphology and crystallinity of pulp were evaluated by scanning electron microscopy and X-ray diffraction analysis.     

Microbial and enzymatic control of pitch in the pulp and paper industry

Pitch control is an important aspect in pulp and paper manufacture, and the first example where microbial biotechnology provided successful solutions in this industrial sector. Triglycerides cause deposits in softwood mechanical pulping, and both microbial and enzymatic products have been commercialized to be applied on wood and pulp, respectively. The former are based on colorless strains of sapstain fungi. The latter are improved lipases, including thermostable variants from directed evolution. These enzymes are among the additives of choice in pulping of high-resin-content softwoods. However, lipases are not useful when pitch originates from other lipids, such as steroids and terpenes, and the sapstain inocula are also only partially effective. In the search for stronger biocatalysts to degrade recalcitrant lipids, the potential of white-rot fungi and their enzymes has been demonstrated. When inocula of these fungi are used, wood treatment must be controlled to avoid cellulose degradation. However, the efficiency and selectivity of the laccase-mediator system permits its integration as an additional bleaching stage. A double benefit can be obtained from these treatments since pitch is controlled at the same time that residual lignin is removed facilitating the implementation of totally chlorine free pulp bleaching.     

Investigation of the biotransformation of pentachlorophenol and pulp paper mill effluent decolorisation by the bacterial strains in a mixed culture

Mixed culture of two bacterial strains Bacillus sp. and Serratia marcescens showed potential pentachlorophenol (PCP) degradation and decolorisation of pulp paper mill effluent. The physico-chemical quality of pulp paper mill effluent has been analyzed after 168 h incubation period degraded by mixed culture. The study revealed that it has decreased high load of BOD, COD, TS, TDS, TSS, sulphate, phosphate, total nitrogen, total phenols, metals and different salts (i.e. chloride, sodium, nitrate, potassium) at 168 h incubation period. PCP degradation in pulp paper mill effluent was confirmed by HPLC analysis. Mixed culture was found to degrade PCP up to (94%) present in pulp paper mill effluent with 1% glucose and 0.5% peptone (w/v) at 30 ± 1 °C, pH 8.0 ± 0.2 at 120 rpm in 168 h incubation period. The simultaneous release of chloride ion up to 1200 mg/l at 168 h emphasized the bacterial dechlorination in the medium. The pulp paper mill effluent degradation was also supported by decline in pH, AOX (absorbable organic halides), color, D.O., BOD, COD and PCP. The analysis of pulp paper mill effluent degradation products by GC–MS analysis revealed the formation of low molecular weight compound like 2-chlorophenol (RT = 3.8 min) and tetrachlorohydroquinone (RT = 11.86 min) from PCP extracted degraded sample. Further, mixed culture may be used for bioremediation of PCP containing pulp paper mill waste in the environment.