Cysteine cross-linking defines part of the dimer and B/C domain interface of the Escherichia coli mannitol permease

Part of the dimer and B/C domain interface of the Escherichia coli mannitol permease (EII(mtl)) has been identified by the generation of disulfide bridges in a single-cysteine EII(mtl), with only the activity linked Cys(384) in the B domain, and in a double-cysteine EII(mtl) with cysteines at positions 384 and 124 in the first cytoplasmic loop of the C domain. The disulfide bridges were formed in the enzyme in inside-out membrane vesicles and in the purified enzyme by oxidation with Cu(II)-(1,10-phenanthroline)(3), and they were visualized by SDS-polyacrylamide gel electrophoresis. Discrimination between possible disulfide bridges in the dimeric double-cysteine EII(mtl) was done by partial digestion of the protein and the formation of heterodimers, in which the cysteines were located either on different subunits or on one subunit. The disulfide bridges that were identified are an intersubunit Cys(384)-Cys(384), an intersubunit Cys(124)-Cys(124), an intersubunit Cys(384)-Cys(124), and an intrasubunit Cys(384)-Cys(124). The disulfide bridges between the B and C domain were observed with purified enzyme and confirmed by matrix-assisted laser desorption ionization-time of flight mass spectrometry. Mannitol did not influence the formation of the disulfide between Cys(384) and Cys(124). The close proximity of the two cysteines 124 was further confirmed with a separate C domain by oxidation with Cu(II)-(1,10-phenanthroline)(3) or by reactions with dimaleimides of different length. The data in combination with other work show that the first cytoplasmic loop around residue 124 is located at the dimer interface and involved in the interaction between the B and C domain.     

A second disulfide bridge from the N-terminal domain to extracellular loop 2 dampens receptor activity in GPR39

A highly conserved feature across all families of 7TM receptors is a disulfide bridge between a Cys residue located at the extracellular end of transmembrane segment III (TM-III) and one in extracellular loop 2 (ECL-2). The zinc sensor GPR39 contains four Cys residues in the extracellular domains. By using mutagenesis, treatment with the reducing agent TCEP, and a labeling procedure for free sulfhydryl groups, we identify the pairing of these Cys residues in two disulfide bridges: the prototypical bridge between Cys (108) in TM-III and Cys (210) in ECL-2 and a second disulfide bridge connecting Cys (11) in the N-terminal domain with Cys (191) in ECL-2. Disruption of the conserved disulfide bond by mutagenesis greatly reduced the level of cell surface expression and eliminated agonist-induced increases in inositol phosphate production but surprisingly enhanced constitutive signaling. Disruption of the nonconserved disulfide bridge by mutagenesis led to an increase in the Zn (2+) potency. This phenotype, with an approximate 10-fold increase in agonist potency and a slight increase in E max, was mimicked by treatment of the wild-type receptor with TCEP at low concentrations, which had no effect on the receptor already lacking the second disulfide bridge and already displaying a high Zn (2+) potency. We conclude that the second disulfide bridge, which according to the beta2-adrenergic structure will form a covalent link across the entrance to the main ligand binding pocket, serves to dampen GPR39 activation. We suggest that formation of extra disulfide bridges may be an important general mechanism for regulating the activity of 7TM receptors.     

Controlled syntheses of natural and disulfide-mispaired regioisomers of alpha-conotoxin SI.

Methods are reported for the unambiguous syntheses of all three possible disulfide regioisomers with the sequence of alpha-conotoxin SI, a tridecapeptide amide from marine cone snail venom that binds selectively to the muscle subtype of nicotinic acetylcholine receptors. The naturally occurring peptide has two 'interlocking' disulfide bridges connecting Cys2-Cys7 and Cys3-Cys13 (2/7&3/13), while in the two mispaired isomers the disulfide bridges connect Cys2-Cys13 and Cys3-Cys7 (2/13 & 3/7, 'nested') and Cys2-Cys3 and Cys7-Cys13 (2/3 & 7/13, 'discrete'), respectively. Alignment of disulfide bridges was controlled at the level of orthogonal protection schemes for the linear precursors, assembled by Fmoc solid-phase peptide synthesis on acidolyzable tris(alkoxy)benzylamide (PAL) supports. Side-chain protection of cysteine was provided by suitable pairwise combination of the S-9H-xanthen-9-yl (Xan) and S-acetamidomethyl (Acm) protecting groups. The first disulfide bridge was formed from the corresponding bis(thiol) precursor obtained by selective deprotection of S-Xan, and the second disulfide bridge was formed by orthogonal co-oxidation of S-Acm groups on the remaining two Cys residues. It was possible to achieve the desired alignments with either order of loop formation (smaller loop before larger, or vice versa). The highest overall yields were obtained when both disulfides were formed in solution, while experiments where either the first or both bridges were formed while the peptide was on the solid support revealed lower overall yields and poorer selectivities towards the desired isomers.     

Stability and structure-forming properties of the two disulfide bonds of alpha-conotoxin GI

alpha-Conotoxin GI is a 13 residue snail toxin peptide cross-linked by Cys2-Cys7 and Cys3-Cys13 disulfide bridges. The formation of the two disulfide bonds by thiol/disulfide exchange with oxidized glutathione (GSSG) has been characterized. To characterize formation of the first disulfide bond in each of the two pathways by which the two disulfide bonds can form, two model peptides were synthesized in which Cys3 and Cys13 (Cono-1) or Cys2 and Cys7 (Cono-2) were replaced by alanines. Equilibrium constants were determined for formation of the single disulfide bonds of Cono-1 and Cono-2, and an overall equilibrium constant was measured for formation of the two disulfide bonds of alpha-conotoxin GI in pH 7.00 buffer and in pH 7. 00 buffer plus 8 M urea using concentrations obtained by HPLC analysis of equilibrium thiol/disulfide exchange reaction mixtures. The results indicate a modest amount of cooperativity in the formation of the second disulfide bond in both of the two-step pathways by which alpha-conotoxin GI folds into its native structure at pH 7.00. However, when considered in terms of the reactive thiolate species, the results indicate substantial cooperativity in formation of the second disulfide bond. The solution conformational and structural properties of Cono-1, Cono-2, and alpha-conotoxin GI were studied by 1H NMR to identify structural features which might facilitate formation of the disulfide bonds or are induced by formation of the disulfide bonds. The NMR data indicate that both Cono-1 and Cono-2 have some secondary structure in solution, including some of the same secondary structure as alpha-conotoxin GI, which facilitates formation of the second disulfide bond by thiol/disulfide exchange. However, both Cono-1 and Cono-2 are considerably less structured than alpha-conotoxin GI, which indicates that formation of the second disulfide bond to give the Cys2-Cys7, Cys3-Cys13 pairing induces considerable structure into the backbone of the peptide.     

Chiral recognition of dextran sulfate with D- and L-cystine studied by multiwavelength surface plasmon resonance

A multiwavelength surface plasmon resonance (mwSPR) approach has been developed to study the chiral discrimination between D- and L-cystine (Cys). A monolayer of the two enantiomers was separately assembled on a pair of gold films of about 50 nm in thickness and their resonance wavelength shifts, Deltalambda, were measured under a continuous flow of an identical chiral probe solution. Dextran sulfate (DS) was found to be an excellent chiral probe because it has rich chiral centers and is large enough to produce sensitive mwSPR response. The chiral discrimination was investigated either by Deltalambda(max), the maximum resonance wavelength shift in recognition equilibrium, or by recognition kinetics (Deltalambda vs time). The equilibrium data showed that D-Cys yielded always the smaller Deltalambda(max) as compared to L-Cys at pH 5.0 or above. This differentiation was enlarged by raising the probe content and became naught at pH <4.5. The kinetic results showed that, as pH increased from 5.0 to 7.5, the non-equilibrium Deltalambda for D-Cys rose above the level for L-Cys at the first 30s of recognition but came back gradually to its equilibrium position after about 150 s, with crossing at 50--150 s depending on DS concentration. This phenomenon was thought to be the result of molecular orientation adjustment after DS binding to D-Cys. Both kinetic and thermodynamic mechanisms were thus considered to be deeply involved in the investigated chiral recognition system.     

Human surfactant polypeptide SP-B. Disulfide bridges, C-terminal end, and peptide analysis of the airway form.

Human hydrophobic surfactant polypeptide, SP-B, purified from lung tissue by exclusion chromatography in organic solvents, has been characterized. The polypeptide is 79 residues long, has a C-terminal methionine, and contains seven Cys residues. Native human SP-B lacks free thiol groups. Three intrachain disulfide bridges were defined, linking Cys8 to Cys77, Cys11 to Cys71 and Cys35 to Cys46. The remaining Cys48 is concluded to link the protein chains into homodimers via an interchain disulfide to its counterpart in a second SP-B polypeptide. These SS bridges are identical to those in the porcine form and confirm a consestant and unique disulfide pattern for SP-B polypeptides in general.     

Disulfide bridges of bovine spleen cathepsin B

Bovine spleen cathepsin B contains 7 disulfide bridges. Cleavage of the enzyme with cyanogen bromide gives rise to a large and a small fragment. The former contains all disulfide bridges. Their arrangement was determined by analysis of amino-acid sequences and compositions of subfragments prepared by cleavage of the large cyanogen-bromide fragment with trypsin, chymotrypsin and the staphylococcal proteinase using specific methods for the detection of S-S-bonds. Disulfide bridges link together Cys14-Cys43, Cys26-Cys71, Cys62-Cys128, Cys63-Cys67, Cys100-Cys132, Cys108-Cys119 and Cys148-Cys252.     

Echistatin disulfide bridges: selective reduction and linkage assignment.

Echistatin is the smallest member of the disintegrin family of snake venom proteins, containing four disulfides in a peptide chain of 49 residues. Partial assignment of disulfides has been made previously by NMR and chemical approaches. A full assignment was made by a newly developed chemical approach, using partial reduction with tris-(2-carboxyethyl)-phosphine at acid pH. Reduction proceeded in a stepwise manner at pH 3, and the intermediates were isolated by high performance liquid chromatography. Alkylation of free thiols, followed by sequencer analysis, enabled all four bridges to be identified: (1) at 20 degrees C a single bridge linking Cys 2-Cys 11 was broken, giving a relatively stable intermediate; (2) with further treatment at 41 degrees C the bridges Cys 7-Cys 32 and Cys 8-Cys 37 became accessible to the reagent and were reduced at approx. equal rates; (3) the two bicyclic peptides produced in this manner were less stable and could be reduced at 20 degrees C to a peptide that retains a single bridge linking Cys 20-Cys 39; and (4) the monocyclic peptide can be reduced to the linear molecule at 20 degrees C. Some disulfide exchange occurred during alkylation of the bicyclic intermediates, but results unambiguously show the pattern to be [2-11; 7-32; 8-37; 20-39]. A comparison is made with kistrin, a longer disintegrin whose disulfide structure has been proposed from NMR analysis.     

Probing the substrate specificity of hepatitis C virus NS3 serine protease by using synthetic peptides.

We probed the substrate specificity of a recombinant noncovalent complex of the full-length hepatitis C virus (HCV) NS3 serine protease and NS4A cofactor, using a series of small synthetic peptides derived from the three trans-cleavage sites of the HCV nonstructural protein sequence. We observed a distinct cleavage site preference exhibited by the enzyme complex. The values of the turnover number (k(cat)) for the most efficient NS4A/4B, 4B/5A, and 5A/5B peptide substrates were 1.6, 11, and 8 min(-1), respectively, and the values for the corresponding Michaelis-Menten constants (Km) were 280, 160, and 16 microM, providing catalytic efficiency values (k(cat)/Km) of 92, 1,130, and 8,300 M(-1) s(-1). An alanine-scanning study for an NS5A/5B substrate (P6P4') revealed that P1 Cys and P3 Val were critical. Finally, substitutions at the scissile P1 Cys residue by homocysteine (Hcy), S-methylcysteine (Mcy), Ala, S-ethylcysteine (Ecy), Thr, Met, D-Cys, Ser, and penicillamine (Pen) produced progressively less efficient substrates, revealing a stringent stereochemical requirement for a Cys residue at this position.     

Assignment of all four disulfide Bridges in echistatin

Echistatin is a 49-amino-acid protein fromEchis carinatus venom. It contains four disulfide bonds. Since the disulfide bonding is critical for biological activity, it is very important to assign the disulfide linkage in this protein. Echistatin was incubated in 250 mM oxalic acid at 100°C for 4 hr under nitrogen. Under these conditions, many overlapping disulfide-containing peptides were identified by ionspray mass spectrometry. Ionspray MS/MS data indicate that the four disulfide bonds are Cys 2–Cys 11, Cys 7–Cys 32, Cys 8–Cys 37, and Cys 20–Cys 39. To our knowledge, this is the first time all four disulfide bonds in echistatin have been assigned in one experiment without disulfide bond exchange. This approach, which combines oxalic acid hydrolysis and ionspray MS/MS, may be very useful for assigning disulfide bridges in other proteins from the disintegrin family.     

Location of disulfide bonds within the sequence of human serum cholinesterase

Human serum cholinesterase was digested with pepsin under conditions which left disulfide bonds intact. Peptides were isolated by high pressure liquid chromatography, and those containing disulfide bonds were identified by a color assay. Peptides were characterized by amino acid sequencing and composition analysis. Human serum cholinesterase contains 8 half-cystines in each subunit of 574 amino acids. Six of these form three internal disulfide bridges: between Cys65-Cys92, Cys252-Cys263, and Cys400-Cys519. A disulfide bond with Cys65 rather than Cys66 was inferred by homology with Torpedo acetylcholinesterase. Cys571 forms a disulfide bridge with Cys571 of an identical subunit. This interchain disulfide bridge is four amino acids from the carboxyl terminus. A peptide containing the interchain disulfide is readily cleaved from cholinesterase by trypsin (Lockridge, O., and La Du, B. N. (1982) J. Biol. Chem. 257, 12012-12018), suggesting that the carboxyl terminus is near the surface of the globular tetrameric protein. The disulfide bridges in human cholinesterase have exactly the same location as in Torpedo californica acetylcholinesterase. There is one potential free sulfhydryl in human cholinesterase at Cys66, but this sulfhydryl could not be alkylated. Comparison of human cholinesterase, and Torpedo and Drosophila acetylcholinesterases to the serine proteases suggests that the cholinesterases constitute a separate family of serine esterases, distinct from the trypsin family and from subtilisin.     

Putative disulfide-forming pathway of porcine insulin precursor during its refolding in vitro

Although the structure of insulin has been well studied, the formation pathway of the three disulfide bridges during the refolding of insulin precursor is ambiguous. Here, we reported the in vitro disulfide-forming pathway of a recombinant porcine insulin precursor (PIP). In redox buffer containing L-arginine, the yield of native PIP from fully reduced/denatured PIP can reach 85%. The refolding process was quenched at different time points, and three distinct intermediates, including one with one disulfide linkage and two with two disulfide bridges, have been captured and characterized. An intra-A disulfide bridge was found in the former but not in the latter. The two intermediates with two disulfide bridges contain the common A20-B19 disulfide linkage and another inter-AB one. Based on the time-dependent formation and distribution of disulfide pairs in the trapped intermediates, two different forming pathways of disulfide bonds in the refolding process of PIP in vitro have been proposed. The first one involves the rapid formation of the intra-A disulfide bond, followed by the slower formation of one of the inter-AB disulfide bonds and then the pairing of the remaining cysteines to complete the refolding of PIP. The second pathway begins first with the formation of the A20-B19 disulfide bridge, followed immediately by another inter-AB one, possibly nonnative. The nonnative two-disulfide intermediates may then slowly rearrange between CysA6, CysA7, CysA11, and CysB7, until the native disulfide bond A6-A11 or A7-B7 is formed to complete the refolding of PIP. The proposed refolding behavior of PIP is compared with that of IGF-I and discussed.     

中国南海新α芋螺毒素Mr1.8的合成及二硫键测定

目的:采用固相方法合成新型α4/7芋螺毒素Mr1.8(PECCTHPACHVSNPELC-NH2),并测定其折叠后的二硫键配对方式。方法:采用Fmoc-固相法合成线性肽Mr1.8,通过空气氧化折叠获得含二硫键的折叠产物,利用两步折叠法测定其二硫键连接方式。结果:Mr1.8线性肽经折叠生成2种产物Ⅰ和Ⅱ,质谱和二硫键分析结果显示Mr1.8-Ⅱ为正确折叠产物,其二硫键框架为(Cys1-Cys3,Cys2-Cys4)。结论:Mr1.8是一种新的α4/7型芋螺毒素,其一种主要折叠产物的二硫键框架为(Cys1-Cys3,Cys2-Cys4)。     

Conformational features responsible for binding of cyclic analogues of enkephalin to opioid receptors. I. Low-energy peptide backbone conformers of analogues containing Phe4

Low-energy peptide backbone conformers were found by means of energy calculation for several cyclic analogues of enkephalin in an attempt to assess models for receptor-bound conformations for opioid receptors of the mu- and delta-types. They included [D-Cys2, L-Cys5]- and [D-Cys2, D-Cys5]-enkephalinamides showing moderate preference for mu-receptors, the delta-selective compounds [D-Pen2, L-Pen5] and [D-Pen2, D-Pen5]-enkephalins and Tyr-D-Lys-Gly-Phe- analogue possessing very high affinity to receptors of the mu-type. The low-energy conformers obtained for these analogues were in good agreement with the results of calculations by other authors and with experimental evidence. All of the analogues contain a Phe residue in position 4 of the peptide chain which facilitates the eventual search for geometrical similarity between the low-energy backbone conformers of different analogues in question.     

Proton n.m.r. investigation of conformational influence of penicillamine residues on the disulfide ring system of opioid receptor selective somatostatin derivatives

Three cyclic disulfide analogs related to somatostatin, D-Phe(1)-cyclo(Cys(2)-Tyr(3)-D-Trp(4)-Lys(5)-Thr(6)-Xxx(7))-Thr(8)- NH2 (where Xxx = L-Pen 1; L-Cys 3; or D-Pen 4) were examined in DMSO-d6 by one- and two-dimensional proton n.m.r. spectroscopy in order to analyze the conformational influence of the position-7 residue on the 20-membered disulfide ring. From these studies it was concluded that all three analogs maintain a beta II' turn solution conformation for the core tetrapeptide -Tyr(3)-D-Trp(4)-Lys(5)-Thr(6)-. However, the disulfide conformation differs in the analogs, with 1 and 3 having a left-handed and 4 a right-handed disulfide chirality.     

Relevance of cysteine residues for biosynthesis and antigenicity of human hepatitis B virus e protein.

The mature form of the secretory core protein (HBe protein) of human hepatitis B virus contains four cysteines which are located at amino acid positions -7, 48, 61, and 107 relative to the HBc start methionine. In addition, there is a cysteine, Cys-183, located in the C-terminal domain of the HBe precursor, which is cleaved during HBe maturation. Here, the significance of these cysteines for biosynthesis and antigenicity of the HBe protein was examined. The cysteines at positions -7 and 61 were found to be crucial for HBe biosynthesis. As has already been described, if the Cys at position -7 is mutated, disulfide-linked HBe homodimers which have both HBe antigenicity and HBc antigenicity are expressed. Here we show that these dimers are due to Cys-61-Cys-61 disulfide bridges which are formed only if the Cys at position -7 is not present. In the wild-type protein, this dimerization appears to be inhibited by formation of intramolecular disulfide bridges between the Cys at -7 and one of the internal cysteines. Moreover, Cys-61 is important for HBe biosynthesis in general since mutation of this amino acid results in production of HBe proteins which are either only poorly secreted or possess a different antigenicity.     

Four disulfide bonds' allocation of Na+, K(+)-ATPase inhibitor (SPAI)

We have recently reported the primary structures of the three unique peptide inhibitors (SPAI-1, -2, and -3) against Na+, K(+)-ATPase which contained four disulfide bridges in common (Biochem. Biophys. Res. Commun. 164, 496 (1989)). The disulfide connectivities of SPAI were determined by the combination of amino acid analyses with the direct application to a gas-phase sequencer of its proteolytic fragments. The disulfide bond was identified by detection of phenylthiohydantoin derivatives of cystine and its decomposed product dehydroalanine. The four cysteine pairs were disclosed to be Cys20 to Cys49, Cys27 to Cys53, Cys36 to Cys48, and Cys42 to Cys57, all linked by disulfide bridge formation. The allocation pattern of these disulfide bonds was the same as that recently reported for human mucous proteinase inhibitor (EMBO J. 7, 345 (1988], though SPAI showed no proteinase inhibitory activity at all.     

The covalent structure of the elastase inhibitor from Anemonia sulcata--a "non-classical" Kazal-type protein

The amino-acid sequence of the proteinase inhibitor specific for elastases from the sea anemone Anemonia sulcata was determined from performic-acid oxidized inhibitor and from three cyanogen bromide fragments of reduced and carboxymethylated inhibitor. The molecule consists of a single polypeptide chain formed from 48 amino-acid residues and is stabilized by three intramolecular disulfide bridges. After cyanogen bromide cleavage of the native protein at methionines 10 and 28 followed by chymotryptic cleavage two fragments each containing a single disulfide bridge were isolated. These indicated the location of three intramolecular disulfide linkages between Cys4 and Cys34 (part of A-loop), Cys8 and Cys27 (B-loop) and Cys16 and Cys48 (C-loop). The sequential homology and the disulfide pattern identified the elastase inhibitor as a Kazal-type inhibitor in which, however, not only the CysI-CysII segment is rather short but interestingly the Cys4-Cys34 disulfide anchoring point (i.e. CysI-CysV) in the C-loop is shifted by one turn in the alpha-helical segment towards the C-terminus. Thus, the elastase inhibitor is a non-classical Kazal-type inhibitor with respect to the positioning of the half-cystines. The inhibitor molecule was modelled based on the known three-dimensional structure of the silver pheasant ovomucoid third domain. The shortened amino-terminal segment was arranged in such a manner to allow disulfide bridge formation between the first cysteine Cys4 and the replaced Cys34 under maintenance of a suitable binding loop conformation. The characteristic ovomucoid scaffold consisting of a central alpha-helix, an adjacent three-stranded beta-sheet and the proteinase-binding loop cross-connected through disulfide bridges CysI-CysV and CysIII-CysVI was conserved.     

A unique lantibiotic, thermophilin 1277, containing a disulfide bridge and two thioether bridges

Aims:  To identify the chemical structure of a bacteriocin, thermophilin 1277, produced by Streptococcus thermophilus SBT1277.
Methods and Results:  Thermophilin 1277 was purified and partial N-terminal sequence analysis revealed 6 unidentified amino acids amongst 31 amino acids residues. A 2·7-kbp region containing the thermophilin 1277 structural gene ( tepA ) encoding 58 amino acids was cloned and sequenced. Mature thermophilin 1277 (33 amino acids) was preceded by a 25-amino acid putative leader peptide containing a double glycine cleavage motif. Peptide sequence analysis following chemical modification of thermophilin 1277 revealed that the Cys21 and Cys29 residues form a disulfide bridge and that Thr8 or Thr10 forms two 3-methyllanthionines with Cys13 or Cys32 via thioether bridges. Antimicrobial activity was disrupted by ethanethiol or reductive agent treatments, indicating that the internal amino acid modifications are crucial for the activity.
Conclusions:  Thermophilin 1277 from Strep. thermophilus SBT1277 belongs to the class of AII-type lantibiotics that has a disulfide and two thioether bridges.
Significance and Impact of the Study:  This is the first report of a lantibiotic produced by a GRAS species of Strep. thermophilus ; thermophilin 1277 has a unique structure containing both a disulfide bridge and two thioether bridges that are crucial for its activity.     

Two transmembrane Cys residues are involved in 5-HT4 receptor dimerization

The 5-HT₄ receptor (5-HT₄R) belongs to the G-protein-coupled receptor (GPCR) family and is of considerable interest for the development of new drugs to treat gastrointestinal diseases and memory disorders. The 5-HT₄R exists as a constitutive dimer but its molecular determinants are still unknown. Using co-immunoprecipitation and Bioluminescence Resonance Energy Transfer (BRET) techniques, we show here that 5-HT₄R homodimerization but not 5-HT₄R-β₂ adrenergic receptor (β₂AR) heterodimerization is largely decreased under reducing conditions suggesting the participation of disulfide bonds in 5-HT₄R dimerization. Molecular modeling and protein docking experiments identified four cysteine (Cys) residues potentially involved in the dimer interface through intramolecular or intermolecular disulfide bonds. We show that disulfide bridges between Cys112 and Cys145 located within TM3 and TM4, respectively, are of critical importance for 5-HT₄R dimer formation. Our data suggest that two disulfide bridges between two transmembrane Cys residues are involved in the dimerization interface of a GPCR.