Tertiary structure of RNase Pch1 predicted from the model structure of RNase Ms and the crystal structure of RNase T1

In this paper we predict the structure of RNase Pch1 as modelled from the previously predicted structure of RNase Ms and the crystal structure of RNase T1 in the complex with 2GMP. The predicted structures and their initial energy minimized structural RNase T1 template are compared. The predicted structures of RNase Pch1 show, independent of their prediction form RNase Ms or T1, a higher structural similarity to RNase T1 than to RNase Ms, in agreement with higher sequence similarity and specificity — RNaes T1 and Pchl are specific for guanine whereas RNase Ms is base-unspecific with preference for guanine. Offprint requests to: W Saenger     

The tertiary structure of Aspergillus saitoi minor ribonuclease (Ms) predicted from the structure of RNase T1

Ribonuclease Ms from Aspergillus saitoi is a small acidic protein (11 714 Da) containing 106 amino acids of known sequence. Unlike other enzymes belonging to the RNase T₁ family this ribonuclease is base-unspecific. Using interactive computer graphics and energy minimisation we predicted the structure of RNase Ms on the basis of sequence homology to RNase T₁ of known structure. In this report the predicted structure of this protein is presented and characterised.     

Jon Widom,the Scientist

Abstract

The structure of base non-specific ribonuclease Ms from Aspergillus saitoi was predicted by sequence similarity to guanine-specific RNase T1 of known structure. In this paper the interaction pattern of binding site of RNase Ms with differnt nucleic acids bases is analysed using model building and energy minimisation techniques. It is shown that unspecificity of this protein can be explained only when taking into account flexibility of the base recognition loop.     

Recognition pattern of different bases in the active site of ribonuclease Ms--a model building study

The structure of base non-specific ribonuclease Ms from Aspergillus saitoi was predicted by sequence similarity to guanine-specific RNase T1 of known structure. In this paper the interaction pattern of binding site of RNase Ms with different nucleic acids bases is analysed using model building and energy minimisation techniques. It is shown that unspecificity of this protein can be explained only when taking into account flexibility of the base recognition loop.     

Primary Structure of a Base Non-specific and Adenylic Acid Preferential Ribonuclease from the Fruit Bodies of Lentinus edodes

The complete primary structure of a base non-specific and adenylic acid preferential RNase (RNase Le₂) from the fruit bodies of Lentinus edodes was analyzed. The sequence was mostly determined by analysis of the peptides generated by V₈ protease digestion and BrCN cleavage (including α-chymotryptic, and V₈ protease digest of BrCN fragments). It consists of 239 amino acid residues. The molecular weight is 25831. The location of 10 half cystine residues were almost superimposable on those of known fungal RNases of the RNase T₂ family. The sequence homologies between RNase Le₂ and four known fungal RNases of the RNase T₂ family, RNase T₂, RNase M, RNase Trv, and RNase Rh, are 102, 103, 109, and 74, respectively. The homologous sequences are concentrated around the three histidines, which are supposed to form the active site of RNase T₂ family RNases.     

Base Specificity and Primary Structure of Poly U-preferential Ribonuclease from Chicken Liver

The primary structure and base specificity of chicken liver RNase CL₁ which has been reported by Miura et al. [Chem. Pharm. Bull., 32,4053–4060 (1984)] as poly U-preferential RNase, were extensively studied. The sequence study of this enzyme and comparison of the amino acid sequence of the enzyme with homologous RNases from oyster and Drosophila melanogaster suggested that RNase CL₁ consists of three peptides with 17, 19, and 163 amino acid residues. The amino acid sequence of these three peptides were identified. The two small peptides are joined to the large peptide by disulfide bridges. The amino acid sequence of RNase CL₁ had 62 (31.2%) and 63 residues (31.6%) identical with oyster RNase and D. melanogaster RNase, respectively, and belongs to the RNase T₂ family RNase.

Reassessment of the base specificity of RNase CL₁ found that it is guanylic acid, then uridylic acid-preferential, and not poly U preferential.     

Structure and regulation of the Salmonella typhimurium rnc-era-recO operon

The Escherichia coli rnc-era-recO operon encodes ribonuclease III (RNase III; a dsRNA endonuclease involved in rRNA and mRNA processing and decay), Era (an essential G-protein of unknown function) and RecO (involved in the RecF homologous recombination pathway). Expression of the rnc and era genes is negatively autoregulated: RNase III cleaves the rncO ‘operator’ in the untranslated leader, destabilizing the operon mRNA. As part of a larger effort to understand RNase III and Era structure and function, we characterized rnc operon structure, function and regulation in the closely related bacterium Salmonella typhimurium. Construction of a S typhimurium strain conditionally defective for RNase III and Era expression showed that Era is essential for cell growth. This mutant strain also enabled selection of recombinant clones containing the intact S typhimurium rnc-era-recO operon, whose nucleotide sequence, predicted protein sequence, and predicted rncO RNA secondary structure were all highly conserved with those of E coli. Furthermore, genetic and biochemical analysis revealed that S typhimurium rnc gene expression is negatively autoregulated by a mechanism very similar or identical to that in E coli, and that the cleavage specificities of RNase III_S.t. and RNase III_E.c. are indistinguishable with regard to rncO cleavage and S typhimurium 23S rRNA fragmentation in vivo.     

Identification of regions in which positive selection may operate in S-RNase of Rosaceae: Implication for S-allele-specific recognition sites in S-RNase

A stylar S-RNase is associated with gametophytic self-incompatibility in the Rosaceae, Solanaceae, and Scrophulariaceae. This S-RNase is responsible for S-allele-specific recognition in the self-incompatible reaction, but how it functions in specific discrimination is not clear. Window analysis of the numbers of synonymous (d_S) and non-synonymous (d_N) substitutions in rosaceous S-RNases detected four regions with an excess of d_N over d_S in which positive selection may operate (PS regions). The topology of the secondary structure of the S-RNases predicted by the PHD method is very similar to that of fungal RNase Rh whose tertiary structure is known. When the sequences of S-RNases are aligned with the sequence of RNase Rh based on the predicted secondary structures, the four PS regions correspond to two surface sites on the tertiary structure of RNase Rh. These findings suggest that in S-RNases the PS regions also form two sites and are candidates for the recognition sites for S-allele-specific discrimination.     

Activity, stability, and structure of metagenome-derived LC11-RNase H1, a homolog of Sulfolobus tokodaii RNase H1

Metagenome‐derived LC11‐RNase H1 is a homolog of Sulfolobus tokodaii RNase H1 (Sto‐RNase H1). It lacks a C‐terminal tail, which is responsible for hyperstabilization of Sto‐RNase H1. Sto‐RNase H1 is characterized by its ability to cleave not only an RNA/DNA hybrid but also a double‐stranded RNA (dsRNA). To examine whether LC11‐RNase H1 also exhibits both RNase H and dsRNase activities, LC11‐RNase H1 was overproduced in Escherichia coli, purified, and characterized. LC11‐RNase H1 exhibited RNase H activity with similar metal ion preference, optimum pH, and cleavage mode of substrate with those of Sto‐RNase H1. However, LC11‐RNase H1 did not exhibit dsRNase activity at any condition examined. LC11‐RNase H1 was less stable than Sto‐RNases H1 and its derivative lacking the C‐terminal tail (Sto‐RNase H1ΔC6) by 37 and 13°C in T_m, respectively. To understand the structural bases for these differences, the crystal structure of LC11‐RNase H1 was determined at 1.4 Å resolution. The LC11‐RNase H1 structure is highly similar to the Sto‐RNase H1 structure. However, LC11‐RNase H1 has two grooves on protein surface, one containing the active site and the other containing DNA‐phosphate binding pocket, while Sto‐RNase H1 has one groove containing the active site. In addition, LC11‐RNase H1 contains more cavities and buried charged residues than Sto‐RNase H1. We propose that LC11‐RNase H1 does not exhibit dsRNase activity because dsRNA cannot fit to the two grooves on protein surface and that LC11‐RNase H1 is less stable than Sto‐RNase H1ΔC6 because of the increase in cavity volume and number of buried charged residues.     

Expression of Soluble Bovine Pancreatic Ribonuclease A in Pichia pastoris and its Purification and Characterization

A Pichia pastoris expression system for bovine pancreatic RNase A was constructed: the RNase A sequence was fused to the PHO1 signal and the AOX1 promoter was used for efficient secretion. Approximately 5 mg of soluble enzymes were secreted per liter of the culture, but one half of them were glycosylated. After a series of purifications by cation-exchange chromatography, the glycosylated enzyme was removed and the pure recombinant soluble unglycosylated RNase A was obtained in the final yield of 1 mg per liter of the culture. N-Terminal sequence, molecular weight, secondary structure, thermal stability, and activity were completely identical with those of commercial RNase A. Glycosylated RNase A had a decreased k _cat, 60-70% of the activity of wild-type RNase A, as in the case of RNase B. Its carbohydrate moiety seemed to destabilize the enzyme differently from RNase B since T _m of the glycosylated RNase A was decreased by 6°C. The carbohydrate moiety of the glycosylated enzyme contained no GlcNAc. The N34A mutant RNase A, in which the only potential N-glycosylation site, Asn34, is mutated to alanine, was also glycosylated, implying that glycosylation is not N-linked but O-linked.     

Identification of a gene family (kat) encoding kinesin-like proteins in Arabidopsis thaliana and the characterization of secondary structure of KatA

A gene family, designated kat, has been characterized in Arabidopsis thaliana by genomic Southern hybridization and nucleotide sequencing analysis. The kat gene family includes at least five members, named katA, katB, katC, katD and katE, whose products share appreciable sequence similarities in their presumptive ATP-binding and microtubule-binding motifs with known kinesin-like proteins. The carboxyl-terminal region of the KatA protein deduced from the nucleotide sequence of the cDNA clone has considerable homology with the mechanochemical motor domain of the kinesin heavy chain. The predicted secondary structure of the KatA protein indicates two globular domains separated by a long a helical coiled coil with heptad repeat structures, such as are commonly found in kinesin-like proteins.     

Sequence variability and gene structure at the self-incompatibility locus of Solanum tuberosum

Summary Allelic complexity is a key feature of self-incompatibility (S) loci in gametophytic plants. We describe in this report the allelic diversity and gene structure of the S locus in Solanum tuberosum revealed by the isolation and characterization of genomic and cDNA clones encoding S-associated major pistil proteins from three alleles (S ₁, S _r1, S ₂). Genomic clones encoding the S₁ and S₂ proteins provide evidence for a simple gene structure: Two exons are separated by a small intron of 113 (S ₁) and 117 by (S ₂). Protein sequences deduced from cDNA clones encoding S₁ and S_r1 proteins show 95% homology. 15 of the 25 residues that differ between these S ₁and S _r1alleles are clustered in a short hypervariable protein segment (amino acid positions 44–68), which corresponds in the genomic clones to DNA sequences flanking the single intron. In contrast, these alleles are only 66% homologous to the S ₂allele, with the residues that differ between the alleles being scattered throughout the sequence. DNA crosshybridization experiments identify a minimum of three classes of potato S alleles: one class contains the alleles S ₁, S _r1and S ₃, the second class S ₂and an allele of the cultivar Roxy, and the third class contains at present only S ₄. It is proposed that these classes reflect the origin of the S alleles from a few ancestral S sequence types.     

长白山白桦山杨次生林细根形态特征和解剖结构对氮沉降的响应

根系作为植物与土壤物质交换和养分循环的桥梁,长期以来一直是生态学研究的热点。于2017年7月植物生长季,对长白山模拟11年氮(N)沉降控制试验样地的白桦(Betula platyphylla)山杨(Populus davidiana)天然次生林进行了根系采样,并利用根序法研究了根系形态特征和解剖结构对不同梯度N添加处理的响应,旨在探求两物种根系之间潜在生态联系。本试验共设置了三个N添加梯度,分别为对照(CK,0 g N m~(-2 )a~(-1))、低N处理(T_L,2.5 g N m~(-2 )a~(-1))和高N处理(T_H,5.0 g N m~(-2 )a~(-1))。研究结果如下:1)T_L显著抑制白桦和山杨前三级细根皮层厚度的生长。白桦通过增加皮层细胞直径(一级根增加了72.77%,二级根增加了53.22%,三级根增加了39.96%)但减少皮层层数来降低皮层厚度,而山杨主要通过皮层细胞直径的减少(一级根下降了40.80%,二级根下降了28.17%)来降低其皮层厚度。2)T_H显著抑制山杨前三级细根生长。主要通过增加皮层厚度(一级根增加了68.78%,二级根增加了50.81%,三级根增加了88.53%)以及降低导管横截面积来抑制吸收养分,从而达到影响生长的目的。3)白桦T_H相比于T_L细根直径呈抑制生长状态。其主要通过抑制中柱直径(一级根下降了17.61%,二级根下降了16.89%,三级根下降了20.62%)的生长来实现。以上结果表明,在同一立地条件下,白桦和山杨的细根对不同浓度N沉降的响应方式不同。     

粘质沙雷氏菌几丁质酶基因ChiA克隆及生物信息学分析

通过生物信息学技术对Chi A基因序列进行分析预测,了解Chi A的基因结构及蛋白质性质。从自有菌株(粘质沙雷氏菌Serratia mareescens S68)中克隆到几丁质酶基因Chi A,利用相关软件对Chi A基因序列进行分析预测。Chi A基因全长1 714 bp,开放阅读框编码563个氨基酸,推测其编码的蛋白质分子量为60 983.8Da,等电点为6.35,是一种稳定的亲水性蛋白质。预测Chi A可能存在信号肽,切割位点在第23~24位氨基酸之间,1~23位氨基酸为其跨膜结构,其余肽链位于细胞外。Chi A主要存在3种二级结构元件,在二级、三级结构中都有体现。该Chi A是一种水溶性蛋白质,结构稳定且可以分泌到胞外。     

The primary structure of a cDNA for PsaN,encoding an extrinsic lumenal polypeptide of barley photosystem I

A cDNA clone encoding a 15.501 Da photosystem I (PSI) subunit of barley was isolated using an oligonucleotide based on the NH₂-terminal amino acid sequence of the isolated protein. The polypeptide, which migrates with an apparent molecular mass of 9.5 kDa on denaturing SDS-PAGE, has been designated PSI-N, and the corresponding gene is PsaN. Analysis of the deduced protein sequence indicates a mature protein of 85 amino acid residues and a molecular mass of 9818 Da. PSI-N is a hydrophilic, extrinsic protein with no predicted membrane-spanning regions. The transit peptide of 60 residues (5683 Da) contains a predicted hydrophobic -helix, suggesting that the protein is routed into the thylakoid lumen. Thus, PSI-N is the second known lumenal protein component associated with PSI, together with PSI-F.     

Nucleotide sequence and regulated expression of the Salmonella fljA gene encoding a repressor of the phase 1 flagellin gene

Summary The nucleotide sequence of Salmonella abortus-equi fljA, which together with the phase 2 flagellin gene constitutes the fljBA operon and encodes the repressor for the phase 1 flagellin gene fliC, was determined. The repressor was predicted to be a basic protein consisting of 179 amino acid residues (M_r = 20419 Da) encoded by ORFII. This was confirmed by the fact that host fliC is repressed by plasmid-encoded ORFII, which indeed expresses a 20 kDa product as determined by urea SDS-polyacrylamide gel electrophoresis. An amino acid sequence capable of forming a helix-turn-helix type of structure was predicted in the C-terminal region of FljA. A rho-independent intercistronic terminator was detected between fljB and ftjA. Chloramphenicol acetyltransferase (CAT) assays of fusions indicated that the terminator is capable of reducing expression of fljA to the level of a few percent, relative to fljB in broth cultures and to 1 % in M9 glycerol cultures.