Interaction of adjacent amino acid residues in the structured regions of globular proteins

Distribution of the pairs of amino acids i, i + 1 in alpha-helical, beta-sheet and random coil regions from 46 globular proteins comprising 8115 amino acid residues was analyzed. Statistical analysis of the data excludes null hypothesis about random pairing of the amino acid residues i, i + 1 in beta-sheet and random coil configurations. The distribution of the amino acid pairs, i, i + 1 in alpha-helical configurations does not differ from the random pairing.     

Structural intermediates in the putative pathway from the cellular prion protein to the pathogenic form

The conversion of the alpha-helical, protease sensitive and noninfectious form of the prion protein (PrP(C)) into an insoluble, protease resistant, predominantly beta-sheeted and infectious form (PrP(Sc)) is the fundamental event in prion formation. In the present work, two soluble and stable intermediate structural states are newly identified for recombinant Syrian hamster PrP(90-231) (recPrP), a dimeric alpha-helical state and a tetra- or oligomeric, beta-sheet rich state. In 0.2% SDS at room temperature, recPrP is soluble and exhibits alpha-helical and random coil secondary structure as determined by circular dichroism. Reduction of the SDS concentration to 0.06% leads first to a small increase in alpha-helical content, whereas further dilution to 0.02% results in the aquisition of beta-sheet structure. The reversible transition curve is sigmoidal within a narrow range of SDS concentrations (0.04 to 0.02%). Size exclusion chromatography and chemical crosslinking revealed that the alpha-helical form is dimeric, while the beta-sheet rich form is tetra- or oligomeric. Both the alpha-helical and beta-sheet rich intermediates are soluble and stable. Thus, they should be accessible to further structural and mechanistic studies. At 0.01% SDS, the oligomeric intermediates aggregated into large, insoluble structures as observed by fluorescence correlation spectroscopy. Our results are discussed with respect to the mechanism of PrP(Sc) formation and the propagation of prions.     

Conformational study of globulin from rice (Oryza sativa) seeds by Fourier-transform infrared spectroscopy

The conformation of rice globulin (10%, w/v, in deuterated phosphate buffer, pD 7.4) under the influence of pH, chaotropic salts, several protein structure perturbants and heat treatments was studied by Fourier-transform infrared (FTIR) spectroscopy. Rice globulin exhibited seven major bands in the region of 1700-1600 cm-1 and the spectrum suggests high alpha-helical content with large quantities of beta-sheet and beta-turn structures. Highly acidic and alkaline pH conditions induced changes in band intensity attributed to intermolecular beta-sheet structure (1681 and 1619 cm-1). Addition of chaotropic salts led to progressive changes in band intensity, following the lyotropic series of anions, whereas several protein structure perturbants caused shifts in band positions. Heating at increasing temperature led to progressive decreases in alpha-helical content and increases in random coil structures, suggesting protein denaturation. This was accompanied by intensity increases in the intermolecular beta-sheet transitions.     

Laser Raman characterization of conformational changes in sarcoplasmic reticulum induced by temperature, Ca2+, and Mg2+

Laser Raman spectroscopy has been used to examine the conformations of the protein and phospholipid components of sarcoplasmic reticulum from rabbit white skeletal muscle. The phospholipid component is shown to have the conformation of fluid, liquid-crystalline lipids, even at 10 degrees C, and no breaks in the lipid conformation are observed in the range of 10-37 degrees C. Protein (predominantly the Ca2+-dependent ATPase) conformation is shown to contain very little beta-sheet structure under all conditions. Absolute content of alpha-helix and random coil or beta-turn could not be determined because of interference in the amide I and III regions. However, the Ca2+-ATPase in sarcoplasmic reticulum appears to undergo a conformational change at 15-18 degrees C which involves removal of a portion of the tryptophan residues from an aqueous environment and an increase in alpha-helical content. This conformation change coincides with a change in slope of Arrhenius plots of ATP hydrolysis activity. Increasing concentrations of Ca2+ and Mg2+ appear to slightly decrease the alpha-helical content of sarcoplasmic reticulum protein.     

Conformational transitions and fibrillation mechanism of human calcitonin as studied by high-resolution solid-state 13C NMR

Conformational transitions of human calcitonin (hCT) during fibril formation in the acidic and neutral conditions were investigated by high-resolution solid-state 13C NMR spectroscopy. In aqueous acetic acid solution (pH 3.3), a local alpha-helical form is present around Gly10 whereas a random coil form is dominant as viewed from Phe22, Ala26, and Ala31 in the monomer form on the basis of the 13C chemical shifts. On the other hand, a local beta-sheet form as viewed from Gly10 and Phe22, and both beta-sheet and random coil as viewed from Ala26 and Ala31 were detected in the fibril at pH 3.3. The results indicate that conformational transitions from alpha-helix to beta-sheet, and from random coil to beta-sheet forms occurred in the central and C-terminus regions, respectively, during the fibril formation. The increased 13C resonance intensities of fibrils after a certain delay time suggests that the fibrillation can be explained by a two-step reaction mechanism in which the first step is a homogeneous association to form a nucleus, and the second step is an autocatalytic heterogeneous fibrillation. In contrast to the fibril at pH 3.3, the fibril at pH 7.5 formed a local beta-sheet conformation at the central region and exhibited a random coil at the C-terminus region. Not only a hydrophobic interaction among the amphiphilic alpha-helices, but also an electrostatic interaction between charged side chains can play an important role for the fibril formation at pH 7.5 and 3.3 acting as electrostatically favorable and unfavorable interactions, respectively. These results suggest that hCT fibrils are formed by stacking antiparallel beta-sheets at pH 7.5 and a mixture of antiparallel and parallel beta-sheets at pH 3.3.     

Secondary structures of rat lipolytic enzymes: circular dichroism studies and relation to hydrophobic moments

To explore the secondary structures of lingual and pancreatic lipases, circular dichroism measurements were performed. Maximum average ellipticities were used to calculate the percentage of alpha-helices, beta-sheets, and random coils. Lingual lipase had an ellipticity of -20235 +/- 140 deg cm2/dmol (mean +/- SE) at 220 nm suggesting 60% alpha-helix, 20% beta-sheet and 20% random coil structure, but the mean ellipticity for pancreatic lipase was -14093 +/- 82 deg cm2/dmol (mean +/- SE) at 210 nm suggesting a 34.8% alpha-helical, 25% beta-sheet and 40% random coil secondary structure. An alpha-helical stretch of residues with a large hydrophobic moment ("globular" alpha-helix by hydrophobic moment plot) from amino acids 382 through 389 at the COOH-terminal end of lingual lipase was noted. This sequence, absent in pancreatic lipase, may account for the avid binding of lingual lipase to fat emulsion particles.     

Structural transformation and aggregation of human alpha-synuclein in trifluoroethanol: non-amyloid component sequence is essential and beta-sheet formation is prerequisite to aggregation

Amyloid-like aggregation of alpha-synuclein and deposit in Lewy bodies are thought to be the major cause of Parkinson's disease. Here we describe the secondary structural transformation and aggregation of human alpha-synuclein and its C-terminus truncated fragments in trifluoroethanol. Proteins containing the NAC (non-amyloid component) segment undergo a three-state transition: from native random coil to beta-sheet and to alpha-helical structure, while the NAC deficient fragment and gamma-synuclein undergo a typical two-state coil-to-alpha transition. The beta-sheet form is highly hydrophobic that strongly binds to 1-anilinonaphthalene-8-sulfonic acid (ANS) and is prone to self-aggregation. The results suggest that the NAC sequence is essential to beta-sheet formation and the aggregation originates from the beta-sheet intermediate, which may be implicated in the pathogenesis of Parkinson's disease.     

Maps of preferential conformation of dipeptides in the structural regions of globular proteins

According to X-ray crystallographic analysis of 46 globular proteins the probability of dipeptides frequency in alpha-helical beta-sheet and random coil conformations has been studied on the basis of which the maps of preferentially conformational state of dipeptide in different elements of secondary structure of proteins have been obtained.     

Structure-function studies of Murraya koenigii trypsin inhibitor revealed a stable core beta sheet structure surrounded by alpha-helices with a possible role for alpha-helix in inhibitory function

Structure-function studies of Murraya koenigii trypsin inhibitor revealed a compact structure made of central beta-sheet surrounded by alpha-helices with differences in structure and functional stability. Proteolysis studies, of native and heat-treated protein, demonstrated that inhibitor exhibited strong resistance to proteolysis by many proteases. However, the inhibitory activity gradually decreased with increasing temperature and was completely lost at 90 degrees C. CD studies, under native conditions, showed that inhibitor contains approximately 46% beta-strand, 30.1% alpha-helical, 16.2% turn and 6.9% random coil structure. At increasing temperatures, however, helix to coil transition was observed. The ANS fluorescence study showed linear increase of fluorescence intensity without showing any melting transition. Correlating decrease in inhibitory activity and helical content at increasing temperatures suggest a possible role for alpha-helical structure in inhibitory function of the protein.     

Importance of secondary structural specificity determinants in protein folding: insertion of a native beta-sheet sequence into an alpha-helical coiled-coil

To examine how a short secondary structural element derived from a native protein folds when in a different protein environment, we inserted an 11-residue beta-sheet segment (cassette) from human immunoglobulin fold, Fab new, into an alpha-helical coiled-coil host protein (cassette holder). This de novo design protein model, the structural cassette mutagenesis (SCM) model, allows us to study protein folding principles involving both short- and long-range interactions that affect secondary structure stability and conformation. In this study, we address whether the insertion of this beta-sheet cassette into the alpha-helical coiled-coil protein would result in conformational change nucleated by the long-range tertiary stabilization of the coiled-coil, therefore overriding the local propensity of the cassette to form beta-sheet, observed in its native immunoglobulin fold. The results showed that not only did the nucleating helices of the coiled-coil on either end of the cassette fail to nucleate the beta-sheet cassette to fold with an alpha-helical conformation, but also the entire chimeric protein became a random coil. We identified two determinants in this cassette that prevented coiled-coil formation: (1) a tandem dipeptide NN motif at the N-terminal of the beta-sheet cassette, and (2) the hydrophilic Ser residue, which would be buried in the hydrophobic core if the coiled-coil structure were to fold. By amino acid substitution of these helix disruptive residues, that is, either the replacement of the NN motif with high helical propensity Ala residues or the substitution of Ser with Leu to enhance hydrophobicity, we were able to convert the random coil chimeric protein into a fully folded alpha-helical coiled-coil. We hypothesized that this NN motif is a "secondary structural specificity determinant" which is very selective for one type of secondary structure and may prevent neighboring residues from adopting an alternate protein fold. These sequences with secondary structural specificity determinants have very strong local propensity to fold into a specific secondary structure and may affect overall protein folding by acting as a folding initiation site.     

Tau paired helical filaments from Alzheimer's disease brain and assembled in vitro are based on beta-structure in the core domain

Tau protein, a neuronal microtubule-associated protein, forms insoluble fibers ("paired helical filaments") in Alzheimer's disease and other tauopathies. Conflicting views on the structure of the fibers have been proposed recently, ranging from mainly alpha-helical structure to mainly beta-sheet, or a mixture of mostly random coil and beta-sheet. We have addressed this issue by studying tau fibers immunopurified from Alzheimer brain tissue by a conformation-specific antibody and comparing them with fibers reassembled from recombinant tau or tau constructs in vitro, using a combination of electron microscopy and spectroscopic methods. Brain-derived fibers and reassembled fibers both exhibit a typical twisted appearance when examined by electron microscopy. The soluble tau protein is a natively unfolded protein dominated by random coil structure, whereas Alzheimer PHFs and reassembled fibers show a shift toward an increase in the level of beta-structure. The results support a model in which the repeat domain of tau (which lies within the core of PHFs) adopts an increasing level of beta-structure during aggregation, whereas the N- and C-terminal domains projecting away from the PHF core are mostly random coil.     

Hydrogen bonding and equilibrium protium-deuterium fractionation factors in the immunoglobulin G binding domain of protein G

Protium-deuterium fractionation factors (phi) were determined for more than 85% of the backbone amide protons in the IgG binding domains of protein G, GB1 and GB2, from NMR spectra recorded over a range of H2O/D2O solvent ratios. Previous studies suggest a correlation between phi and hydrogen bond strength; amide and hydroxyl groups in strong hydrogen bonds accumulate protium (phi < 1), while weak hydrogen bonds accumulate deuterium (phi > 1). Our results show that the alpha-helical residues have slightly lower phi values (1.03 +/- 0.05) than beta-sheet residues (1.12 +/- 0.07), on average. The lowest phi value obtained (0.65) does not involve a backbone amide but rather is for the interaction between two side chains, Y45 and D47. Fractionation factors for solvent-exposed residues are between the alpha-helix and beta-sheet values, on average, and are close to those for random coil peptides. Further, the difference in phiav between alpha-helix and solvent-exposed residues is small, suggesting that differences in hydrogen bond strength for intrachain hydrogen bonds and amide...water hydrogen bonds are also small. Overall, the enrichment for deuterium suggests that most backbone...backbone hydrogen bonds are weak.     

Unraveling double stranded alpha-helical coiled coils: an x-ray diffraction study on hard alpha-keratin fibers

Transformations of proteins secondary and tertiary structures are generally studied in globular proteins in solution. In fibrous proteins, such as hard alpha-keratin, that contain long and well-defined double stranded alpha-helical coiled coil domains, such study can be directly done on the native fibrous tissue. In order to assess the structural behavior of the coiled coil domains under an axial mechanical stress, wide angle x-ray scattering and small angle x-ray scattering experiments have been carried out on stretched horse hair fibers at relative humidity around 30%. Our observations of the three major axial spacings as a function of the applied macroscopic strain have shown two rates. Up to 4% macroscopic strain the coiled coils were slightly distorted but retained their overall conformation. Above 4% the proportion of coiled coil domains progressively decreased. The main and new result of our study is the observation of the transition from alpha-helical coiled coils to disordered chains instead of the alpha-helical coiled coil to beta-sheet transition that occurs in wet fibers.     

Spectroscopic studies of fibrinogen and its plasmin-derived fragments.

The secondary structure of human fibrinogen and its plasmin-fragments have been studied by FTIR spectroscopy. The quantitative results for fibrinogen are in good agreement with previous studies using circular dichroism spectroscopy. After treatment of fibrinogen with plasmin in buffer containing Ca2+, two major fragments are produced: fragment E (Mw 45,000) and fragment D (Mw 100,000). Fragment E is shown to contain 50% alpha-helical values, attributed to its coiled-coil portions, and minor beta-strands and turn structures. Its deuteration gives evidence of the presence of solvent-exposed alpha-helical structures. On the other hand, fragment D contains a distribution of secondary structure values of 35% alpha-helix, 29% beta-sheet segments and 17% turn structures. Fragment D itself has two domains: a portion of the original coiled-coil and also a thermally labile globular domain. The coiled-coil portion (Mw 27,000) was isolated and showed a high alpha-helical content (around 70%). The globular domain is estimated to be rich in beta-sheet structures. The spectra of fibrin clots formed in Ca(2+)-containing buffer have a lower amide I/amide II ratio than fibrinogen spectra, which is interpreted as being due to aggregation.     

Probing local secondary structure by fluorescence: time-resolved and circular dichroism studies of highly purified neurotoxins.

The relationship between beta-sheet secondary structure and intrinsic tryptophan fluorescence parameters of erabutoxin b, alpha-cobratoxin, and alpha-bungarotoxin were examined. Nuclear magnetic resonance and x-ray crystallography have shown that these neurotoxins have comparable beta-sheet, beta-turn, and random coil secondary structures. Each toxin contains a single tryptophan (Trp) residue within its beta-sheet. The time-resolved fluorescence properties of native erabutoxin b and alpha-cobratoxin are best described by triple exponential decay kinetics, whereas native alpha-bungarotoxin exhibits more than four lifetimes. The disulphide bonds of each toxin were reduced to facilitate carboxymethylation and amidocarboxymethylation. The two different toxin derivatives of all three neurotoxins displayed triple exponential decay kinetics and were completely denatured as evidenced by circular dichroism (random coil). The concentration (c) values of the three fluorescence decay times (time-resolved fluorescence spectroscopy (TRFS)) were dramatically different from those of the native toxins. Each neurotoxin, treated with different concentrations of guanidinium hydrochloride (GuHCl), was studied both by circular dichroism and TRFS. Disappearance of the beta-sheet secondary structural features with increasing concentrations of GuHCl was accompanied by a shift in the relative contribution (c value) of each fluorescence decay time (TRFS). It was found that certain disulphide residues confer added stability to the beta-sheet secondary structure of these neurotoxins and that the center of the beta-sheet is last to unfold. These titrations show that Trp can be used as a very localized probe of secondary structure.     

Determination of the secondary structure of proteins in different environments by FTIR-ATR spectroscopy and PLS regression

The secondary structures of proteins (alpha-helical, beta-sheet, beta-turn, and random coil) in the solid state and when bound to polymer beads, containing immobilized phenyl and butyl ligands such as those as commonly employed in hydrophobic interaction chromatography, have been investigated using FTIR-ATR spectroscopy and partial least squares (PLS) methods. Proteins with known structural features were used as models, including 12 proteins in the solid state and 7 proteins adsorbed onto the hydrophobic surfaces. A strong PLS correlation was achieved between predictions derived from the experimental data for 4 proteins adsorbed onto the phenyl-modified beads and reference data obtained from the X-ray crystallographic structures with r(2) values of 0.9974, 0.9864, 0.9924, and 0.9743 for alpha-helical, beta-sheet, beta-turn, and random coiled structures, respectively. On the other hand, proteins adsorbed onto the butyl sorbent underwent greater secondary structural changes compared to the phenyl sorbent as evidenced from the poorer PLS r(2) values (r(2) are 0.9658, 0.9106, 0.9571, and 0.9340). The results thus indicate that the secondary structures for these proteins were more affected by the butyl sorbent, whereas the secondary structure remains relatively unchanged for the proteins adsorbed onto the phenyl sorbent. This study has important ramifications for understanding the nature of protein secondary structural changes following adsorption onto hydrophobic sorbent surfaces. This knowledge could also enable the development of useful protocols for enhancing the chromatographic purification of proteins in their native bioactive states. (c) 2008 Wiley Periodicals, Inc. Biopolymers 89: 895-905, 2008.This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com.     

Effects of cyclic GMP on the secondary structure of cyclic GMP dependent protein kinase and analysis of the enzyme's amino-terminal domain by far-ultraviolet circular dichroism

Far-UV circular dichroism spectra of bovine lung cyclic GMP dependent protein kinase (G-kinase) show that the enzyme contains alpha-helical and beta-pleated sheet elements. Binding of cyclic GMP changes the spectra in a way consistent with the induction of beta-sheet from random coil. Examination of the amino-terminal sequence of G-kinase indicates the presence of a strongly alpha-helical segment with several features in common with the leucine zipper motif. We propose that this sequence may be the important part of the dimerization domain of the enzyme. A synthetic peptide corresponding to amino acids 1-39 of G-kinase has a strongly alpha-helical CD spectrum, supporting the predicted secondary structure of this amino-terminal sequence. In contrast to the native enzyme, a structure reduced in alpha-helix was found when a constitutively active form of G-kinase, which lacks amino acids 1-77, was studied.     

Prediction of the conformation of the histones.

The secondary structures of the histones, H1, H2A, H2B, H3, and H4 have been predicted utilizing the predictive scheme of Chou and Fasman (Biochemistry 13:211, 222[1974]) and a new set of conformational parameters based on the X-ray data of 29 protein structures. The alpha-helical, beta-sheet, reverse beta-turns, and random coil regions of these proteins are carefully delineated. Structures are specified which are most probably under various environmental conditions, i.e., for changes in ionic strength, association between histones and in association with DNA. Potential conformational changes within these histones are also predicted.     

NMR studies of amyloid beta-peptides: proton assignments, secondary structure, and mechanism of an alpha-helix----beta-sheet conversion for a homologous, 28-residue, N-terminal fragment.

Beta-peptide is a major component of amyloid deposits in Alzheimer's disease. We report here a proton nuclear magnetic resonance (NMR) spectroscopic investigation of a synthetic peptide that is homologous to residues 1-28 of beta-peptide [abbreviated as beta-(1-28)]. The beta-(1-28) peptide produces insoluble beta-pleated sheet structures in vitro, similar to the beta-pleated sheet structures of beta-peptide in amyloid deposits in vivo. For peptide solutions in the millimolar range, in aqueous solution at pH 1-4 the beta-(1-28) peptide adopts a monomeric random coil structure, and at pH 4-7 the peptide rapidly precipitates from solution as an oligomeric beta-sheet structure, analogous to amyloid deposition in vivo. The NMR work shown here demonstrates that the beta-(1-28) peptide can adopt a monomeric alpha-helical conformation in aqueous trifluoroethanol solution at pH 1-4. Assignment of the complete proton NMR spectrum and the determination of the secondary structure were arrived at from interpretation of two-dimensional (2D) NMR data, primarily (1) nuclear Overhauser enhancement (NOE), (2) vicinal coupling constants between the amide (NH) and alpha H protons, and (3) temperature coefficients of the NH chemical shifts. The results show that at pH 1.0 and 10 degrees C the beta-(1-28) peptide adopts an alpha-helical structure that spans the entire primary sequence. With increasing temperature and pH, the alpha-helix unfolds to produce two alpha-helical segments from Ala2 to Asp7 and Tyr10 to Asn27. Further increases in temperature to 35 degrees C cause the Ala2-Asp7 section to become random coil, while the His13-Phe20 section stays alpha-helical. A mechanism involving unfavorable interactions between charged groups and the alpha-helix macrodipole is proposed for the alpha-helix----beta-sheet conversion observed at midrange pH.     

Conformational transition and liquid crystalline state of regenerated silk fibroin in water

The conformational transition of molecular chains of regenerated silk fibroin (SF) aqueous solution is systematically investigated by circular dichroism, Raman, IR, and UV-vis spectroscopies. It is found that an initial random coil conformation of the SF can be readily changed into an ordered beta-sheet structure by optimizing the solution conditions, such as the SF concentration, pH, temperature, or metal-ion content. Circular dichroic spectra quantitatively confirm a steadily decreased content of the random coil conformation but a significantly increased beta-sheet content after an ultrasonic or extruding treatment. Furthermore, the extrusion is more powerful to achieve high beta-sheet content than the ultrasonic. It is interesting that the polarized optical micrographs of the SF aqueous solution extruded by injection illustrate the formation and existence of liquid crystalline state. A study of extrusion in vitro could be used as a model system to understand the natural silk spinning process in silkworm.