Heterologous expression and characterisation of a laccase from <Emphasis Type="Italic">Colletotrichum lagenarium</Emphasis> and decolourisation of different synthetic dyes

Laccases have received considerable attention in recent decades because of their ability to oxidise a large spectrum of phenolic and non-phenolic organic substrates and highly recalcitrant environmental pollutants. In this research, a laccase gene from Colletotrichum lagenarium was chemically synthesised using yeast bias codons and expressed in Pichia pastoris. The molecular mass of the recombinant laccase was estimated to be 64.6 kDa by SDS–PAGE, and the enzyme exhibited maximum activity at pH 3.6–4.0 but more stability in buffer with higher pH (>pH 3.6). The optimal reaction temperature of the enzyme was 40 °C, beyond which stability significantly decreased. By using 2,2′-azino-bis-(3-ethylbenzothiazoline)-6-sulphonate (ABTS) as a substrate, K _m and V _max values of 0.34 mM and 7.11 mM min^?1 mg^?1, respectively, were obtained. Using ABTS as a mediator, the laccase could oxidise hydroquinone to p-benzoquinone and decolourise the synthetic dyes malachite green, crystal violet and orange G. These results indicated that the laccase could be used to treat industrial effluents containing artificial dyes.     

Molecular characterization and homology modeling of spermidine synthase from <Emphasis Type="Italic">Synechococcus</Emphasis> sp. PCC 7942

Spermidine synthase (Spds) catalyzes the formation of spermidine by transferring the aminopropyl group from decarboxylated S-adenosylmethionine (dcSAM) to putrescine. The Synechococcus spds gene encoding Spds was expressed in Escherichia coli. The purified recombinant enzyme had a molecular mass of 33 kDa and showed optimal activity at pH 7.5, 37?°C. The enzyme had higher affinity for dcSAM (K _m, 20 µM) than for putrescine (K _m, 111 µM) and was highly specific towards the diamine putrescine with no activity observed towards longer chain diamines. The three-dimensional structural model for Synechococcus Spds revealed that most of the ligand binding residues in Spds from Synechococcus sp. PCC 7942 are identical to those of human and parasite Spds. Based on the model, the highly conserved acidic residues, Asp89, Asp159 and Asp162, are involved in the binding of substrates putrescine and dcSAM and Pro166 seems to confer substrate specificity towards putrescine.     

Localization of the <Emphasis Type="Italic">Bacillus subtilis</Emphasis> beta-propeller phytase transcripts in nodulated roots of <Emphasis Type="Italic">Phaseolus vulgaris</Emphasis> supplied with phytate

Soil organic phosphorus (Po) such as phytate, which comprises up to 80 % of total Po, must be hydrolyzed by specific enzymes called phytases to be used by plants. In contrast to plants, bacteria, such as Bacillus subtilis, have the ability to use phytate as the sole source of P due to the excretion of a beta-propeller phytase (BPP). In order to assess whether the B. subtilis BPP could make P available from phytate for the benefit of a nodulated legume, the P-sensitive recombinant inbred line RIL147 of Phaseolus vulgaris was grown under hydroaeroponic conditions with either 12.5 μM phytate (C₆H₁₈O₂₄P₆) or 75 μmol Pi (K₂HPO₄), and inoculated with Rhizobium tropici CIAT899 alone, or co-inoculated with both B. subtilis DSM 10 and CIAT899. The in situ RT-PCR of BPP genes displayed the most intense fluorescent BPP signal on root tips. Some BPP signal was found inside the root cortex and the endorhizosphere of the root tip, suggesting endophytic bacteria expressing BPP. However, the co-inoculation with B. subtilis was associated with a decrease in plant P content, nodulation and the subsequent plant growth. Such a competitive effect of B. subtilis on P acquisition from phytate in symbiotic nitrogen fixation might be circumvented if the rate of inoculation were reasoned in order to avoid the inhibition of nodulation by excess B. subtilis proliferation. It is concluded that B. subtilis BPP gene is expressed in P. vulgaris rhizosphere.     

The purification and characterization of a novel alkali-stable pectate lyase produced by <Emphasis Type="Italic">Bacillus subtilis</Emphasis> PB1

Pectinase is an important kind of enzyme with many industrial applications, among which pectinases produced by bacteria were scarce compared with fungal sources. In this study, a novel bacterium which produced extracellular pectinase was firstly isolated from flue-cured tobacco leaves and identified as Bacillus subtilis PB1 according to its 16S rRNA gene. The pectinolytic enzyme was purified by ammonium sulfate precipitation, ion-exchange and gel filtration chromatography, after which molecular weight was determined as 43.1?±?0.5 kDa by SDS–PAGE. Peptide mass fingerprinting of the pectinase by MALDI-TOF MS showed that the purified enzyme shared homology with pectate lyase and was designated as BsPel-PB1. The optimal temperature for BsPel-PB1 was 50 °C. The optimal pH was pH 9.5 for BsPel-PB1 while it had a broad pH stability from 5 to 11. The values of K _m and V _max were 0.312 mg/mL and 1248 U/mL, respectively. Accordingly, the BsPel-PB1 was a novel alkaline pectate lyase which could find potential application as a commercial candidate in the pectinolytic related industries.     

Cloning,purification and characterization of novel Cu-containing nitrite reductase from the <Emphasis Type="Italic">Bacillus firmus</Emphasis> GY-49

Nitrite is generated from the nitrogen cycle and its accumulation is harmful to environment and it can be reduced to nitric oxid by nitrite reductase. A novel gene from Bacillus firmus GY-49 is identified as a nirK gene encoding Cu-containing nitrite reductase by genome sequence. The full-length protein included a putative signal peptide of 26 amino acids and shown 72.73% similarity with other Cu-containing nitrite reductase whose function was verified. The 993-bp fragment encoding the mature peptide of NirK was cloned into pET-28a (+) vector and overexpressed as an active protein of 36.41 kDa in the E.coli system. The purified enzyme was green in the oxidized state and displayed double gentle peaks at 456 and 608 nm. The specific activity of purified enzyme was 98.4 U/mg toward sodium nitrite around pH 6.5 and 35 °C. The K _m and K _cat of NirK on sodium nitrite were 0.27 mM and 0.36?×?10³ s^?1, respectively. Finally, homology model analysis of NirK indicated that the enzyme was a homotrimer structure and well conserved in Cu-binding sites for enzymatic functions. This is a first report for nitrite reductase from Bacillus firmus, which augment the acquaintance of nitrite reductase.     

Cloning,expression, and characterization of a thermostable glucose-6-phosphate dehydrogenase from <Emphasis Type="Italic">Thermoanaerobacter tengcongensis</Emphasis>

Glucose-6-phosphate dehydrogenases (G6PDs) are important enzymes widely used in bioassay and biocatalysis. In this study, we reported the cloning, expression, and enzymatic characterization of G6PDs from the thermophilic bacterium Thermoanaerobacter tengcongensis MB4 (TtG6PD). SDS-PAGE showed that purified recombinant enzyme had an apparent subunit molecular weight of 60 kDa. Kinetics assay indicated that TtG6PD preferred NADP⁺ (k _cat/K _m = 2618 mM^?1 s^?1, k _cat = 249 s^?1, K _m = 0.10 ± 0.01 mM) as cofactor, although NAD⁺ (k _cat/K _m = 138 mM^?1 s^?1, k _cat = 604 s^?1, K _m = 4.37 ± 0.56 mM) could also be accepted. The K _m values of glucose-6-phosphate were 0.27 ± 0.07 mM and 5.08 ± 0.68 mM with NADP⁺ and NAD⁺ as cofactors, respectively. The enzyme displayed its optimum activity at pH 6.8–9.0 for NADP⁺ and at pH 7.0–8.6 for NAD⁺ while the optimal temperature was 80 °C for NADP⁺ and 70 °C for NAD⁺. This was the first observation that the NADP⁺-linked optimal temperature of a dual coenzyme-specific G6PD was higher than the NAD⁺-linked and growth (75 °C) optimal temperature, which suggested G6PD might contribute to the thermal resistance of a bacterium. The potential of TtG6PD to measure the activity of another thermophilic enzyme was demonstrated by the coupled assays for a thermophilic glucokinase.     

Characterization of an α-amino-ɛ-caprolactam racemase with broad substrate specificity from <Emphasis Type="Italic">Citreicella</Emphasis> sp. SE45

α-Amino-ε-caprolactam (ACL) racemizing activity was detected in a putative dialkylglycine decarboxylase (EC 4.1.1.64) from Citreicella sp. SE45. The encoding gene of the enzyme was cloned and transformed in Escherichia coli BL21 (DE3). The molecular mass of the enzyme was shown to be 47.4 kDa on SDS–polyacrylamide gel electrophoresis. The enzymatic properties including pH and thermal optimum and stabilities were determined. This enzyme acted on a broad range of amino acid amides, particularly unbranched amino acid amides including l-alanine amide and l-serine amide with a specific activity of 17.5 and 21.6 U/mg, respectively. The K _m and V _max values for d- and l-ACL were 5.3 and 2.17 mM, and 769 and 558 μmol/min.mg protein, respectively. Moreover, the turn over number (K _cat) and catalytic efficiency (K _cat/K _m ) of purified ACL racemase from Citreicella sp. SE45 using l-ACL as a substrate were 465 S^?1 and 214 S^?1mM^?1, respectively. The new ACL racemase from Citreicella sp. SE45 has a potential to be used as the biocatalytic application.     

Medium Optimization for Improved Production of Dihydrolipohyl Dehydrogenase from <Emphasis Type="Italic">Bacillus sphaericus</Emphasis> PAD-91 in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Dihydrolipohyl dehydrogenase (DLD) is a FAD-dependent enzyme that catalyzes the reversible oxidation of dihydrolipoamide. Herein, we report medium optimization for the production of a recombinant DLD with NADH-dependent diaphorase activity from a strain of Bacillus sphaericus PAD-91. The DLD gene that consisted of 1413 bp was expressed in Escherichia coli BL21 (DE3), and its enzymatic properties were studied. The composition of production medium was optimized using one-variable-at-a-time method followed by response surface methodology (RSM). B. sphaericus DLD catalyzed the reduction of lipoamide by NAD⁺ and exhibited diaphorase activity. The molecular weight of enzyme was about 50 kDa and determined to be a monomeric protein. Recombinant diaphorase showed its optimal activity at temperature of 30 °C and pH 8.5. K _m and V _max values with NADH were estimated to be 0.025 mM and 275.8 U/mL, respectively. Recombinant enzyme was optimally produced in fermentation medium containing 10 g/L sucrose, 25 g/L yeast extract, 5 g/L NaCl and 0.25 g/L MgSO₄. At these concentrations, the actual diaphorase activity was calculated to be 345.0 ± 4.1 U/mL. By scaling up fermentation from flask to bioreactor, enzyme activity was increased to 486.3 ± 5.5 U/mL. Briefly, a DLD with diaphorase activity from a newly isolated B. sphaericus PAD-91 was characterized and the production of recombinant enzyme was optimized using RSM technique.     

Production,characteristics and applications of phytase from a rhizosphere isolated <Emphasis Type="Italic">Enterobacter</Emphasis> sp. ACSS

Optimization of process parameters for phytase production by Enterobacter sp. ACSS led to a 4.6-fold improvement in submerged fermentation, which was enhanced further in fed-batch fermentation. The purified 62 kDa monomeric phytase was optimally active at pH 2.5 and 60 °C and retained activity over a wide range of temperature (40–80 °C) and pH (2.0–6.0) with a half-life of 11.3 min at 80 °C. The kinetic parameters K _m, V _max, K _cat, and K _cat/K _m of the pure phytase were 0.21 mM, 131.58 nmol mg^?1 s^?1, 1.64 × 10³ s^?1, and 7.81 × 10⁶ M^?1 s^?1, respectively. The enzyme was fairly stable in the presence of pepsin under physiological conditions. It was stimulated by Ca⁺², Mg⁺² and Mn⁺², but inhibited by Zn⁺², Cu⁺², Fe⁺², Pb⁺², Ba⁺² and surfactants. The enzyme can be applied in dephytinizing animal feeds, and the baking industry.     

A calcium-stimulated serine peptidase from a true-branching cyanobacterium, <Emphasis Type="Italic">Westiellopsis ramosa</Emphasis> sp. nov.

Unbranched heterocytous cyanobacteria produce a number of serine peptidases. We have characterized several peptidases in the cell-free extracts of a true-branched N₂-fixing cyanobacterium, Westiellopsis ramosa sp. nov. Upon substrate-gel zymography of intact filaments and heterocytes, five peptidase bands were resolved, whereas in vegetative cells, a single band was discernible. No band was detected in \({\text{NO}}_{3}^{ - } /{\text{NH}}_{4}^{ + }\)-grown cultures suggesting that the peptidases were present under diazotrophic conditions with much of them confined to heterocytes. Using salt precipitation and chromatography, a caseinolytic peptidase, called Wrp49, was purified which also demonstrated fibrinolytic activity. In SDS-PAGE, the purified peptidase was resolved into 17 and 27 kDa fragments. The enzyme in its native state exhibited M_r ≈ 49 kDa, and digested gelatin in a substrate gel at a corresponding position. The enzyme showed amidolytic activity on a plasmin specific substrate, D-Val-Leu-Lys p-nitroanilide. Moreover, a trypsin specific substrate, N-benzoyl-DL-Arg p-nitroanilide was hydrolyzed at an apparent K_m = 0.195 mM and V_max = 5 × 10^?7 M s^?1. The enzyme was stable in a wide pH and temperature range. While Ca²⁺ stimulated the activity; phenylmethane sulfonyl fluoride, leupeptin, EDTA and chelants were inhibitory. The activity of the EDTA-inactivated enzyme was completely restored upon adding Ca²⁺, suggesting that both compounds competed with each other in modulating the enzyme activity. The enzyme showed similarities with a Ca²⁺ stimulated subtilisin-like serine peptidase of Anabaena variabilis ATCC 29413, but also presented several unique features of metallopeptidases, such as the chelant’s response. Moreover, the N-terminal sequence (MTVENLARTGVGPGWR) did not match with any of the known peptidases.     

Single point mutations enhance activity of <Emphasis Type="Italic">cis</Emphasis>-epoxysuccinate hydrolase

Objectives

To enhance activity of cis-epoxysuccinate hydrolase from Klebsiella sp. BK-58 for converting cis-epoxysuccinate to tartrate.

Results

By semi-saturation mutagenesis, all the mutants of the six important conserved residues almost completely lost activity. Then random mutation by error-prone PCR and high throughput screening were further performed to screen higher activity enzyme. We obtained a positive mutant F10D after screening 6000 mutations. Saturation mutagenesis on residues Phe10 showed that most of mutants exhibited higher activity than the wild-type, and the highest mutant was F10Q with activity of 812 U mg^?1 (k _cat /K _m , 9.8 ± 0.1 mM^?1 s^?1), which was 230 % higher than that of wild-type enzyme 355 U mg^?1 (k _cat /K _m , 5.3 ± 0.1 mM^?1 s^?1). However, the thermostability of the mutant F10Q slightly decreased.

Conclusions

The catalytic activity of a cis-epoxysuccinate hydrolase was efficient improved by a single mutation F10Q and Phe10 might play an important role in the catalysis.

     

Expression and characterization of glutamate decarboxylase from <Emphasis Type="Italic">Lactobacillus brevis</Emphasis> HYE1 isolated from <Emphasis Type="Italic">kimchi</Emphasis>

A putative gene (gadlbhye1) encoding glutamate decarboxylase (GAD) was cloned from Lactobacillus brevis HYE1 isolated from kimchi, a traditional Korean fermented vegetable. The amino acid sequences of GADLbHYE1 showed 48% homology with the GadA family and 99% identity with the GadB family from L. brevis. The cloned GADLbHYE1 was functionally expressed in Escherichia coli using inducible expression vectors. The expressed recombinant GADLbHYE1 was successfully purified by Ni–NTA affinity chromatography, and had a molecular mass of 54 kDa with optimal hydrolysis activity at 55 °C and pH 4.0. Its thermal stability was determined to be higher than that of other GADs from L. brevis, based on its melting temperature (75.18 °C). Kinetic parameters including K_m and V_max values for GADLbHYE1 were 4.99 mmol/L and 0.224 mmol/L/min, respectively. In addition, the production of gamma-aminobutyric acid in E. coli BL21 harboring gadlbhye1/pET28a was increased by adding pyridoxine as a cheaper coenzyme.     

Purification and characterization of a β-1,4-glucosidase from a newly isolated strain of <Emphasis Type="Italic">Fomitopsis pinicola</Emphasis>

An efficient ß-1,4-glucosidase (BGL) producing strain, Fomitopsis pinicola KMJ812, was isolated and identified based on morphological features and sequence analysis of internal transcribed spacer rDNA. An extracellular BGL was purified to homogeneity by sequential chromatography of F. pinicola culture supernatants on a DEAE-sepharose column, a gel filtration column, and then on a Mono Q column with fast protein liquid chromatography. The relative molecular weight of F. pinicola BGL was determined to be 105 kDa by sodium dodecylsulfate-polyacrylamide gel electrophoresis, or 110 kDa by size exclusion chromatography, indicating that the enzyme is a monomer. The hydrolytic activity of the BGL had a pH optimum of 4.5 and a temperature optimum of 50°C. The enzyme showed high substrate specificity and high catalytic efficiency (k _cat?=?2,990 s^?1, K _m?=?1.76 mM, k _cat/K _m?=?1,700 mM^?1 s^?1) for p-nitrophenyl-β-d-glucopyranoside. Its internal amino acid sequences showed a significant homology with hydrolases from glycoside hydrolase family 3, indicating that the F. pinicola BGL is a member of glycoside hydrolase family 3. Although BGLs have been purified and characterized from several other sources, F. pinicola BGL is distinguished from other BGLs by its high catalytic efficiency and strict substrate specificity.     

Characterization of a novel <Emphasis Type="Italic">Acinetobacter baumannii</Emphasis> xanthine dehydrogenase expressed in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Objective

To characterize a novel xanthine dehydrogenase (XDH) from Acinetobacter baumannii by recombinant expression in Escherichia coli and to assess its potential for industrial applications.

Results

The XDH gene cluster was cloned from A. baumannii CICC 10254, expressed heterologously in E. coli and purified to homogeneity. The purified recombinant XDH consisted of two subunits with the respective molecular weights of 87 kDa and 56 kDa according to SDS-PAGE. XDH catalysis was optimum at pH 8.5 and 40–45 °C, was stable under alkaline conditions (pH 7–11) and the half-inactivation temperature was 60 °C. The K _m, turnover number and catalytic efficiency for xanthine were 25 μM, 69 s^?1 and 2.7 μM^?1 s^?1, respectively, which is an improvement over XDHs characterized previously. A. baumannii XDH is less than 50 % identical to previously identified XDH orthologs from other species, and is the first from the Acinetobacter genus to be characterized.

Conclusion

The novel A. baumannii enzyme was found to be among the most active, thermostable and alkaline-tolerant XDH enzymes reported to date and has potential for use in industrial applications.

     

Assessing biodegradation of furfuryl alcohol using <Emphasis Type="Italic">Pseudomonas putida</Emphasis> MTCC 1194 and <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> MTCC 1034 and its kinetics

The biodegradation of furfuryl alcohol (FA) in shake flask experiments using a pure culture of Pseudomonas putida (MTCC 1194) and Pseudomonas aeruginosa (MTCC 1034) was studied at 30 °C and pH 7.0. Experiments were performed at different FA concentrations ranging from 50 to 500 mg/l. Before carrying out the biodegradation studies, the bacterial strains were acclimatized to the concentration of 500 mg/l of FA by gradually raising 100 mg/l of FA in each step. The well acclimatized culture of P. putida and P. aeruginosa degraded about 80 and 66% of 50 mg/l FA, respectively. At higher concentration of FA, the percentage of FA degradation decreased. The purpose of this study was to determine the kinetics of biodegradation of FA by measuring biomass growth rates and concentration of FA as a function of time. Substrate inhibition was calculated from experimental growth parameters using the Haldane equation. Data for P. putida were determined as µ _max ?=?0.23 h^?1, K _s ?=?23.93 mg/l and K _i ?=?217.1 mg/l and for P. aeruginosa were determined as µ _max ?=?0.13 h^?1, K _s ?=?21.3 mg/l and K _i ?=?284.9 mg/l. The experimental data were fitted in Haldane, Aiba and Edwards inhibition models.     

Deciphering the mode of action,structural and biochemical analysis of heparinase II/III (<Emphasis Type="Italic">Ps</Emphasis>PL12a) a new member of family 12 polysaccharide lyase from <Emphasis Type="Italic">Pseudopedobacter saltans</Emphasis>

Heparinases are widely used for production of clinically and therapeutically important bioactive oligosaccharides and in analyzing the polydisperse, heterogeneous, and complex structures of heparin/heparan sulfate. In the present study, the gene (1911 bp) encoding heparinase II/III of family 12 polysaccharide lyase (PsPL12a) from Pseudopedobacter saltans was cloned, expressed, and biochemically and functionally characterized. The purified enzyme PsPL12a of molecular size approximately 76 kDa exhibited maximum activity in the temperature range 45–50 °C and at pH 6.0. PsPL12a gave maximum activity at 1% (w/v) heparin under optimum conditions. The kinetic parameters, K _m and V_max, for PsPL12a were 4.6?±?0.5 mg/ml and 70?±?2 U/mg, respectively. Ten millimolars of each Mg²⁺ and Mn²⁺ ions enhanced PsPL12a activity by 80%, whereas Ni²⁺ inhibited by 75% and Co²⁺ by 10%, and EDTA completely inactivated the enzyme. Protein melting curve of PsPL12a gave a single peak at 55 °C and 10 mM Mg²⁺ ions and shifted the peak to 60 °C. The secondary structure analysis of PsPL12a by CD showed 65.12% α-helix, 11.84% β-strand, and 23.04% random coil. The degradation products of heparin by PsPL12a analyzed by ESI-MS spectra displayed peaks corresponding to heparin di-, tetra-, penta-, and hexa-saccharides revealing the endolytic mode of enzyme action. Heparinase II/III (PsPL12a) from P. saltans can be used for production of low molecular weight heparin oligosaccharides for their utilization as anticoagulants. This is the first report on heparinase cloned from P. saltans.     

Cloning and characterization of a novel amidase from <Emphasis Type="Italic">Paracoccus</Emphasis> sp. M-1, showing aryl acylamidase and acyl transferase activities

A novel amidase gene, designated pamh, was cloned from Paracoccus sp. M-1. Site-directed mutagenesis and bioinformatic analysis showed that the PamH protein belonged to the amidase signature enzyme family. PamH was expressed in Escherichia coli, purified, and characterized. The molecular mass of PamH was determined to be 52 kDa with an isoelectric point of 5.13. PamH displayed its highest enzymatic activity at 45°C and at pH 8.0 and was stable within a pH range of 5.0–10.0. The PamH enzyme exhibited amidase activity, aryl acylamidase activity, and acyl transferase activity, allowing it to function across a very broad substrate spectrum. PamH was highly active on aromatic and short-chain aliphatic amides (benzamide and propionamide), moderately active on amino acid amides, and possessed weak urease activity. Of the anilides examined, only propanil was a good substrate for PamH. For propanil, the k _cat and K _m were 2.8 s^?1 and 158 μM, respectively, and the catalytic efficiency value (k _cat/K _m) was 0.018 μM^?1 s^?1. In addition, PamH was able to catalyze the acyl transfer reaction to hydroxylamine for both amide and anilide substrates, including acetamide, propanil, and 4-nitroacetanilide; the highest reaction rate was shown with isobutyramide. These characteristics make PamH an excellent candidate for environmental remediation and an important enzyme for the biosynthesis of novel amides.     

In Vitro Functional Characterisation of Cytochrome P450 (CYP) 2C19 Allelic Variants <Emphasis Type="Italic">CYP2C19*23</Emphasis> and <Emphasis Type="Italic">CYP2C19*24</Emphasis>

Cytochrome P450 (CYP) 2C19 is essential for the metabolism of clinically used drugs including omeprazole, proguanil, and S-mephenytoin. This hepatic enzyme exhibits genetic polymorphism with inter-individual variability in catalytic activity. This study aimed to characterise the functional consequences of CYP2C19*23 (271 G>C, 991 A>G) and CYP2C19*24 (991 A>G, 1004 G>A) in vitro. Mutations in CYP2C19 cDNA were introduced by site-directed mutagenesis, and the CYP2C19 wild type (WT) as well as variants proteins were subsequently expressed using Escherichia coli cells. Catalytic activities of CYP2C19 WT and those of variants were determined by high performance liquid chromatography-based essay employing S-mephenytoin and omeprazole as probe substrates. Results showed that the level of S-mephenytoin 4′-hydroxylation activity of CYP2C19*23 (V _max 111.5 ± 16.0 pmol/min/mg, K _m 158.3 ± 88.0 μM) protein relative to CYP2C19 WT (V _max 101.6 + 12.4 pmol/min/mg, K _m 123.0 ± 19.2 μM) protein had no significant difference. In contrast, the K _m of CYP2C19*24 (270.1 ± 57.2 μM) increased significantly as compared to CYP2C19 WT (123.0 ± 19.2 μM) and V _max of CYP2C19*24 (23.6 ± 2.6 pmol/min/mg) protein was significantly lower than that of the WT protein (101.6 ± 12.4 pmol/min/mg). In vitro intrinsic clearance (CL_int = V _max/K _m) for CYP2C19*23 protein was 85.4 % of that of CYP2C19 WT protein. The corresponding CL_int value for CYP2C19*24 protein reduced to 11.0 % of that of WT protein. These findings suggested that catalytic activity of CYP2C19 was not affected by the corresponding amino acid substitutions in CYP2C19*23 protein; and the reverse was true for CYP2C19*24 protein. When omeprazole was employed as the substrate, K _m of CYP2C19*23 (1911 ± 244.73 μM) was at least 100 times higher than that of CYP2C19 WT (18.37 ± 1.64 μM) and V _max of CYP2C19*23 (3.87 ± 0.74 pmol/min/mg) dropped to 13.4 % of the CYP2C19 WT (28.84 ± 0.61 pmol/min/mg) level. Derived from V _max/K _m, the CL_int value of CYP2C19 WT was 785 folds of CYP2C19*23. K _m and V _max values could not be determined for CYP2C19*24 due to its low catalytic activity towards omeprazole 5′-hydroxylation. Therefore, both CYP2C19*23 and CYP2C19*24 showed marked reduced activities of metabolising omeprazole to 5-hydroxyomeprazole. Hence, carriers of CYP2C19*23 and CYP2C19*24 allele are potentially poor metabolisers of CYP2C19-mediated substrates.     

Characterization of alcohol dehydrogenase from <Emphasis Type="Italic">Kangiella koreensis</Emphasis> and its application to production of all-<Emphasis Type="Italic">trans</Emphasis>-retinol

A recombinant alcohol dehydrogenase (ADH) from Kangiella koreensis was purified as a 40 kDa dimer with a specific activity of 21.3 nmol min^?1 mg^?1, a K _m of 1.8 μM, and a k _cat of 1.7 min^?1 for all-trans-retinal using NADH as cofactor. The enzyme showed activity for all-trans-retinol using NAD ⁺ as a cofactor. The reaction conditions for all-trans-retinol production were optimal at pH 6.5 and 60 °C, 2 g enzyme l^?1, and 2,200 mg all-trans-retinal l^?1 in the presence of 5 % (v/v) methanol, 1 % (w/v) hydroquinone, and 10 mM NADH. Under optimized conditions, the ADH produced 600 mg all-trans-retinol l^?1 after 3 h, with a conversion yield of 27.3 % (w/w) and a productivity of 200 mg l^?1 h^?1. This is the first report of the characterization of a bacterial ADH for all-trans-retinal and the biotechnological production of all-trans-retinol using ADH.