Homogeneous preparation of fluorescent-derivatized insulin and its application to competitive chromatographic immunoassays.

A homogeneously labeled insulin sample was prepared using 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) as the fluorescent-labeling reagent, and this was successfully applied to a chromatographic immunoassay. This labeled insulin was prepared by tagging all the three amino groups with AQC. Both CE and chromatographic immunoassay experiments indicated that the prepared insulin still kept its immunoaffinity to its antibody. It was observed that appropriate concentrations of acetonitrile (ACN) were efficient in lowering the quenching of the fluorescent signal of tagged insulin, in keeping the dilute, tagged insulin in solution, and in improving its peak shape during a chromatographic immunoassay. The tagged insulin was found to be 20-400 times more sensitive than native insulin detected under ultraviolet detection conditions. A competitive chromatographic immunoassay system was set up and calibrated. The system was used for analyses of an insulin-spiked urine sample, with a 96% recovery obtained.     

A solid phase fluorescent capillary immunoassay for the detection of Escherichia coli O157:H7 in ground beef and apple cider

A solid phase fluorescence-based immunoassay was developed for the detection of Escherichia coli O157:H7 using an antigen down competition format. A soft glass capillary tube served as the solid support, to which heat-killed E. coli O157:H7 were adsorbed. Polyclonal anti- E. coli O157:H7 antibody, conjugated with biotin, was used and the bound antigen-antibody complex was detected using avidin molecules labelled with Cy5, a fluorescent cyanine dye. Any E. coli O157:H7 in the sample would compete with the formation of this complex, reducing fluorescence. This assay was tested for sensitivity with spiked ground beef and apple cider samples. The minimum detectable number of cells present in the initial inoculum was calculated to be approximately 1 colony-forming unit (cfu) per 10g of ground beef when samples were enriched in modified EC broth for 7 h at 37°C. The minimum detectable number of cells for the apple cider samples was calculated to be ∼0.5 cfu ml^-1 The E. coli cells in the cider samples were captured with immunomagnetic beads, incubated for 7 h in the enrichment broth, and detected with the solid phase fluorescence immunoassay.     

Rapid simultaneous determination of glucagon and insulin by capillary electrophoresis immunoassays

A rapid capillary electrophoresis (CE) with laser-induced fluorescence (LIF) competitive immunoassay has been developed for the determination of glucagon in biological mixtures. In the assay, fluorescein-conjugated glucagon is mixed with the sample followed by addition of anti-glucagon. Free and antibody-bound, tagged glucagon could be separated in 3 s using CE to obtain quantitative determination of glucagon with a concentration detection limit of 760 pM. The assay was combined with a previously developed competitive immunoassay for insulin to produce a simultaneous immunoassay for both peptides. The method was used to determine glucagon content of islets of Langerhans.     

Determination of bradykinin in rat urine by coupled-column high pressure liquid chromatography with precolumn derivatization with a water-soluble fluorogenic reagent

The green fluorescent protein (GFP) and its mutants have been extensively used to study various cellular processes and, more recently, as labels in binding assays. We have employed a mutant of GFP, an enhanced GFP (EGFP), in the development of homogeneous assays for biotin and cortisol. To demonstrate the feasibility of using EGFP as a label with different kinds of binders in the development of homogeneous assays, we employed the biotin-avidin and an antigen-antibody as the binding pairs. Biotin and cortisol were chemically conjugated to EGFP. A quenching of fluorescence intensity of EGFP was observed upon binding of avidin to the EGFP-biotin conjugate. The percentage fluorescence quenching observed decreased as the concentration of free biotin in the sample increased due to the fewer binding sites on avidin available for binding to the EGFP-biotin conjugate. A dose-response curve for biotin was generated by relating percentage fluorescence quenched with free biotin in the sample. To determine whether EGFP can undergo a similar type of homogeneous change when used as a label for antigen-antibody type of binding, cortisol was selected as a model analyte. In the presence of an anti-cortisol antibody the fluorescence signal of the EGFP-cortisol conjugate was quenched. A dose-response curve for cortisol was generated by relating the quenching in the fluorescence signal with varying amounts of free cortisol in the sample. This is the first time that GFP or one of its mutants has been employed as a label in homogeneous assays, thus enhancing the versatility of employing GFP or its mutants in a number of bioanalytical applications, such as clinical analysis and high-throughput screening systems.     

Hypersensitive substrate for ribonucleases.

A substrate for a hypersensitive assay of ribonucleolytic activity was developed in a systematic manner. This substrate is based on the fluorescence quenching of fluorescein held in proximity to rhodamine by a single ribonucleotide embedded within a series of deoxynucleotides. When the substrate is cleaved, the fluorescence of fluorescein is manifested. The optimal substrate is a tetranucleotide with a 5',6-carboxyfluorescein label (6-FAM) and a 3',6-carboxy-tetramethylrhodamine (6-TAMRA) label: 6-FAM-dArUdAdA-6-TAMRA. The fluorescence of this substrate increases 180-fold upon cleavage. Bovine pancreatic ribonuclease A (RNase A) cleaves this substrate with a k (cat)/ K (m)of 3.6 x 10(7)M(-1)s(-1). Human angiogenin, which is a homolog of RNase A that promotes neovascularization, cleaves this substrate with a k (cat)/ K (m)of 3. 3 x 10(2)M(-1)s(-1). This value is >10-fold larger than that for other known substrates of angio-genin. With these attributes, 6-FAM-dArUdAdA-6-TAMRA is the most sensitive known substrate for detecting ribo-nucleolytic activity. This high sensitivity enables a simple protocol for the rapid determination of the inhibition constant ( K (i)) for competitive inhibitors such as uridine 3'-phosphate and adenosine 5'-diphos-phate.     

Elemental and molecular detection for Quantum Dots-based immunoassays: a critical appraisal

A critical comparison between Elemental Mass Spectrometry (ICP-MS) and molecular fluorescence, as detection techniques for CdSe/ZnS Quantum Dots (QDs)-based immunoassays is presented here. Using a QDs-based progesterone immunoassay as "model" analytical system the features of both detection modes has been investigated. Minimal changes, compared to the previously developed fluorescent approach, were necessary to build the corresponding inhibition curve for the progesterone immunoassay using ICP-MS detection of cadmium (contained in the QDs core). Adequate agreement between results obtained using both elemental and molecular techniques for the determination of progesterone in cow milk has been obtained. Moreover, results from the comparison showed that fluorescence detection of the QDs is simpler, less time consuming and less expensive, but ICP-MS detection affords alternative and useful information unattainable using luminescence detection. First of all, ICP-MS allowed mass balances to be carried out (all along the sample preparation) providing an internal validation of the immunoassay procedure. Secondly, matrix-independent quantification as provided by ICP-MS enabled a direct determination of progesterone in raw milk without any further sample preparation (dilution) step. As a matter of fact, ICP-MS results showed that the quenching matrix effect suffered on bioconjugated QDs fluorescence emission (e.g. when the immunoassay was carried out directly in whole milk without any dilution) could be unequivocally attributed to nonspecific interactions between the matrix of the whole milk and the QDs surface. Finally, better sensitivity could be obtained with ICP-MS detection, IC(10)=0.028 ng/mL, versus 0.11 ng/mL using conventional fluorimetric detection, just by using lower reagents concentrations.     

An A666G mutation in transmembrane helix 5 of the yeast multidrug transporter Pdr5 increases drug efflux by enhancing cooperativity between transport sites

Resistance to antimicrobial and chemotherapeutic agents is a significant clinical problem. Overexpression of multidrug efflux pumps often creates broad‐spectrum resistance in cancers and pathogens. We describe a mutation, A666G, in the yeast ABC transporter Pdr5 that shows greater resistance to most of the tested compounds than does an isogenic wild‐type strain. This mutant exhibited enhanced resistance without increasing either the amount of protein in the plasma membrane or the ATPase activity. In fluorescence quenching transport assays with rhodamine 6G in purified plasma membrane vesicles, the initial rates of rhodamine 6G fluorescence quenching of both the wild type and mutant showed a strong dependence on the ATP concentration, but were about twice as high in the latter. Plots of the initial rate of fluorescence quenching versus ATP concentration exhibited strong cooperativity that was further enhanced in the A666G mutant. Resistance to imazalil sulfate was about 3–4x as great in the A666G mutant strain as in the wild type. When this transport substrate was used to inhibit the rhodamine 6G transport, the A666G mutant inhibition curves also showed greater cooperativity than the wild‐type strain. Our results suggest a novel and important mechanism: under selection, Pdr5 mutants can increase drug resistance by improving cooperative interactions between drug transport sites.     

A comparative analysis of the immunochemical determination of gentamycin by fluorescence polarization and quenching]

A polarization fluorescence immunoassay (PFIA) for gentamicin with using a set of reagents made in this country was developed. One ml of fluorescein-labeled gentamicin (50 nM) and 100 microliters of antiserum are added to 50 microliters of the sample and the fluorescence polarization is measured. The time of the assay is 10 to 15 minutes, the range of the measurable concentrations is 0 to 800 ng/ml, the sensitivity of the method is 5 ng/ml and the accuracy is 5.8-10.3 per cent. A fluorescence quenching immunoassay (FQIA) for gentamicin was also developed. Determination of gentamicin by the FQIA does not require the use of a specific polarization fluorimeter. Its linear calibrating dependence is more convenient. However, its accuracy and sensitivity are 3 times lower than those of the PFIA.     

New donor-acceptor pair for fluorescent immunoassays by energy transfer

A novel F?rster donor-acceptor dye pair for an immunoassay based on resonance energy transfer (RET) is characterized with respect to its photophysical properties. As donor and acceptor, we chose the long-wavelength excitable cyanine dyes Cy5 and Cy5.5, respectively. Due to the perfect spectral overlap, an exceptionally high R(0) value of 68.7 A is obtained in solution. For biochemical applications, antibodies (IgG) are labeled with Cy5, while a tracer for competitive binding is synthesized by labeling bovine serum albumin (BSA) with an analyte derivative and Cy5.5. Binding the dyes to proteins at a low dye/protein ratio increases the fluorescence lifetimes and quantum yields, leading to an enhanced R(0) value of 85.2 A. At higher dye/protein ratios, the formation of nonfluorescent dimeric species causes a decrease in the fluorescence lifetime and quantum yield due to RET from monomeric dyes to dimers within one protein molecule. The F?rster distances could be calculated using the dimer absorption spectra to 83.9 and 83.6 A for Cy5 and Cy5.5, respectively. Upon binding of the Cy5-labeled IgG to the tracer, efficient quenching of Cy5 fluorescence is observed. Steady-state and time-resolved measurements reveal that approximately 50% of the quenching results in F?rster-type RET, while the residual quenching effect is caused by static quenching processes. The applicability of this dye pair is demonstrated in a homogeneous competitive immunoassay for the pesticide simazine.     

Quantitative immunoassay of biotoxins on hydrogel-based protein microchips

Three-dimensional gel-based microchips with immobilized proteins were used for quantitative immunoassay of a series of plant (ricin and viscumin) and bacterial (staphylococcal enterotoxin B, tetanus and diphtheria toxins, and lethal factor of anthrax) toxins. It was shown that different types of immunoassays (direct, competitive, and sandwich type) could be carried out on gel microchips. As shown by confocal microscope studies, antigen-antibody interactions involving the formation of tertiary antibody-antigen-antibody complex occur in the whole volume of microchip gel elements. Sandwich assay on microchips with immobilized antibodies provided the highest sensitivity of detection (0.1 ng/ml for ricin). Antibodies labeled with fluorescent dyes, horseradish peroxidase conjugates, or biotinylated antibodies with subsequent treatment with labeled avidin were used as developing antibodies. The results of immunoassays were recorded using fluorescence, chemiluminescence, or matrix-assisted laser desorption ionization mass spectrometry directly from microchip gel elements. Gel microchips with immobilized capture antibodies were used to analyze the sample simultaneously for the presence of all six biotoxins with the same sensitivity as that for any single toxin.     

Green fluorescent protein-labeled recombinant fluobody for detecting the picloram herbicide

A green fluorescent protein-labeled fluobody was designed to develop a simple immunoassay method for detecting picloram herbicide in an environmental sample. The gfp gene was successfully inserted into the pSJF2 vector harboring the picloram-specific antibody fragment to yield pSJF2GFP. Picloram spiking in an environmental river sample could be indirectly detected by observing the fluorescence intensity value of the gfp-fluobody, exhibiting specific sensitivity to free picloram with an IC50 value of 50 ppb. Using the gfp-fluobody immunoassay avoids the enzyme-substrate reaction for calorimetric detection that is required in an enzyme-linked immunosorbent assay (ELISA).     

Analysis of secretory immunoglobulin A in human saliva by laser-induced fluorescence capillary electrophoresis

The utility of capillary electrophoresis (CE) has been demonstrated for the analysis of secretory immunoglobulin A (sIgA) in human saliva. The amount of sIgA in saliva correlates with immune status. For detecting salivary sIgA, laser-induced fluorescence was conducted in this report for signal amplification. sIgA and anti-sIgA antibody were labeled with cyanine fluorescence (Cy5) for competitive immunoassay and non-competitive analysis, respectively. Cy5 was excited by He-Ne laser with a wavelength of 635 nm, with maximum emission at 670 nm. Migration time during electrophoresis depended on whether sIgA-Cy5 was mixed with antibody or anti-sIgA-Cy5 mixed with sIgA to form Ag-Ab complex. The results indicated that CE competitive immunoassay was effective for analyzing serum sIgA, but not for salivary sIgA. However, salivary sIgA can be analyzed by complex formation assay. The peak area of the complex was proportional to the amount of sIgA added. A standard linear regression curve was generated using purified sIgA. From this standard curve, the amount of sIgA from saliva of either normal or immunocompromised patients can be calculated from the Ag-Ab complex peak area.     

Plant mitochondrial electrical potential monitored by fluorescence quenching of rhodamine 123

The suitability of the fluorescent dye rhodamine 123 for qualitative and quantitative determinations of the electrical potential difference (ΔΨ) in isolated pea (Pisum sativum L.) stem mitochondria was evaluated. A fluorescence quenching of rhodamine 123, as a consequence of dye uptake, occurred following mitochondria energization by both external and internal substrates. This quenching was associated to the generation of ΔΨ, because it was completely released by uncouplers and respiratory inhibitors. The conversion of the proton gradient (ΔpH) into ΔΨ, induced by nigericin or a permeant weak acid (phosphate), increased the quenching. The uptake of the probe was accompanied by 40 % of unspecific binding in coupled, but not in uncoupled, mitochondria. Rhodamine 123 quenching varied linearly with a K+-diffusion potential. ADP induced a transient and cyclic change of fluorescence which was associated to ATP synthesis. Consequently, rhodamine 123 did not influence oxygen consumption by mitochondria in both state 4 and 3, thus indicating that, at the concentrations assayed, the probe was not toxic. It is concluded that rhodamine 123, followed by fluorescence quenching, is a suitable probe to study the energetics of isolated plant mitochondria. This revised version was published online in July 2006 with corrections to the Cover Date.     

Proximity of lectin receptors on the cell surface measured by fluorescence energy transfer in a flow system.

Molecules of the lectin concanavalin A have been labeled separately with the fluorescein and rhodamine chromophores and jointly bound to the surface of transformed Friend erythroleukemia cells. The two dyes constitute an ideal donor-acceptor pair for fluorescence resonance energy transfer thereby permitting the determination of the proximity relationships between bound ligand molecules and the corresponding surface receptors. The transfer efficiency at saturation (about 57%) was measured in a multiparameter flow system using laser excitation at 488 nm and detection of fluorescein and rhodamine emission intensities as well as the emission anisotropy of the rhodamine fluorescence for each cell. The degree of energy transfer was estimated from the quenching of donor emission, the sensitization of acceptor emission, and the depolarization of acceptor fluorescence. The system has been modeled according to a formalism developed by Gennis and Cantor (Biochemistry 11: 2509, 1972). We estimate the separation between the surfaces of bound lectin molecules at saturation to be 0-40 A, a range possibly characteristic for micropatches induced by ligand binding.     

Indirect competitive immunoassay for detection of aflatoxin B1 in corn and nut products using the array biosensor

Because of the potential health risks of aflatoxin B₁ (AFB₁), it is essential to monitor the level of this mycotoxin in a variety of foods. An indirect competitive immunoassay has been developed using the NRL array biosensor, offering rapid, sensitive detection and quantification of AFB₁ in buffer, corn and nut products. AFB₁-spiked foods were extracted with methanol and Cy5-anti-AFB₁ added to the resulting sample. The extracted sample/antibody mix was passed over a waveguide surface patterned with immobilized AFB₁. The resulting fluorescence signal decreased as the concentration of AFB₁ in the sample increased. The limit of detection for AFB₁ in buffer, 0.3 ng/ml, was found to increase to between 1.5 and 5.1 ng/g and 0.6 and 1.4 ng/g when measured in various corn and nut products, respectively.     

Development of an optical immunosensor based on the fluorescence of Cyanine-5 for veterinarian diagnostics

A model optical immunosensor was developed to quantify an antibody present in a sample by measuring the fluorescence of Cyanine-5 conjugated with the antibody, using a competitive and a sandwich immunoreaction configuration, with the antigen immobilised in controlled pore glass beads. At pH 2, 94% of the antigen-antibody complex was dissociated, allowing reutilisation. Photobleaching had no effect on the fluorescence. This model system was used to detect Brucella sp. infection and could quantify anti-Brucella sp. antibodies in ovine serum samples in the range from 0.005 to 0.11 mg ml(-1).     

Electrical immunosensor based on a submicron-gap interdigitated electrode and gold enhancement

We demonstrated that the detection of human interleukin 5 (IL5) with a higher sensitivity than the enzyme-linked immunosorbent assay (ELISA) was possible using mass-producible submicron-gap interdigitated electrodes (IDEs) combined with signal amplification by a gold nanoparticle (AuNP) and gold enhancement. IDEs, facing comb-shape electrodes, can act as simple and miniaturized devices for immunoassay. An IDE with a gap size of 400nm was fabricated by a stepper photolithography process and was applied for the immunoassay of human IL5. A biotinylated anti-human IL5 was immobilized on the streptavidin-modified IDE, and biotin-bovine serum albumin (BSA) and BSA were added sequentially to reduce non-specific binding between the streptavidin-immobilized IDE surface and other proteins. The immunoassay procedure included three main steps: the reaction of human IL5 to form antigen-antibody complexes, the binding of AuNP conjugation with an antibody against human IL5 for the sandwich immunoassay, and gold enhancement for electrical signal amplification. The measurement of electrical current at each step showed that the gold enhancement step was very critical in detection of the concentration of human IL5. Analysis by scanning electron microscope (SEM) showed that close to 1μm particles were formed from 10nm AuNP by the gold enhancement reaction using gold ions and hydroxylamine. Under optimized conditions, human IL5 could be analyzed at 1pgmL(-1) with a wide dynamic range (from 10(-3) to 100ngmL(-1) concentrations).     

Development of a fluorescence immunoassay for measurement of paclitaxel in human plasma

A new fluorescence immunoassay for the quantitative determination of paclitaxel (Pac) under equilibrium conditions was developed. Anti-Pac IgG2a antibody was immobilized through its Fc region to protein A covalently bound to the inside surface of a silanized glass capillary column and the antigen-binding sites of anti-Pac saturated with rhodamine-labeled Pac (Rh-Pac). Analyte Pac was circulated through the column in a closed loop and the steady-state fluorescence of the Rh-Pac displaced from the immobilized antibody was recorded after 6 min. The Rh-Pac fluorescence emission intensity was directly related to the concentration of the Pac analyte over a broad dynamic range of up to 400 ng/ml with a linear range up to 200 ng/ml and lower detection limit of 5.85 ng/ml. While there was no interference from the baccatin III and 10-deacetylbaccatin III, cephalomannine was found to interfere in Pac determination. When applied for measurement of Pac in human plasma, the concentration of Pac determined by the fluorescence assay was found to be in excellent agreement with the Pac added, confirming the potential of the fluorescence immunoassay for clinical application.     

Multicomponent mesofluidic system for the detection of veterinary drug residues based on competitive immunoassay

An automated multicomponent mesofluidic system (MCMS) based on biorecognitions carried out on meso-scale glass beads in polydimethylsiloxane (PDMS) channels was developed. The constructed MCMS consisted of five modules: a bead introduction module, a bioreaction module, a solution handling module, a liquid driving module, and a signal collection module. The integration of these modules enables the assay to be automated and reduces it to a one-step protocol. The MCMS has successfully been applied toward the detection of veterinary drug residues in animal-derived foods. The drug antigen-coated beads (?250 μm) were arrayed in the PDMS channels (?300 μm). The competitive immunoassay was then carried out on the surface of the glass beads. After washing, the Cy3-labeled secondary antibody was introduced to probe the antigen-antibody complex anchored to the beads. The fluorescence intensity of each bead was measured and used to determine the residual drug concentration. The MCMS is highly sensitive, with its detection limits ranging from 0.02 (salbutamol) to 3.5 μg/L (sulfamethazine), and has a short assay time of 45 min or less. The experimental results demonstrate that the MCMS proves to be an economic, efficient, and sensitive platform for multicomponent detection of compound residues for contamination in foods or the environment.     

Micro flow cytometry utilizing a magnetic bead-based immunoassay for rapid virus detection

The current study presents a new miniature microfluidic flow cytometer integrated with several functional micro-devices capable of viral sample purification and detection by utilizing a magnetic bead-based immunoassay. The magnetic beads were conjugated with specific antibodies, which can recognize and capture target viruses. Another dye-labeled anti-virus antibody was then used to mark the bead-bound virus for the subsequent optical detection. Several essential components were integrated onto a single chip including a sample incubation module, a micro flow cytometry module and an optical detection module. The sample incubation module consisting of pneumatic micropumps and a membrane-type, active micromixer was used for purifying and enriching the target virus-bound magnetic beads with the aid of a permanent magnet. The micro flow cytometry module and the optical detection module were used to perform the functions of virus counting and collection. Experimental results showed that virus samples with a concentration of 10(3)PFU/ml can be automatically detected successfully by the developed system. In addition, the entire diagnosis procedure including sample incubation and virus detection took only about 40min. Consequently, the proposed micro flow cytometry may provide a powerful platform for rapid diagnosis and future biological applications.