Multichannel perfusion culture bioluminescence reporter system for long-term detection in living cells

We constructed a multichannel perfusion culture system. Using this device, we developed a perfusion device to detect six samples at the same time and demonstrated the response to dexamethasone of the circadian-related promoter activity in Rat1 fibroblast cells. We could detect the sequential phase shifts of the circadian peaks that are dependent on the timing of the drug treatments. We also demonstrate a temporal dual reporter assay using two kinds of secreted luciferase in the perfusion culture. The combination of secreted luciferase and multiple perfusion culture assay system reveals the effects of transient drug treatment for the pharmacological assay.     

Effect of culture temperature on follicle-stimulating hormone production by Chinese hamster ovary cells in a perfusion bioreactor

Follicle-stimulating hormone (FSH) was produced in Chinese hamster ovary (CHO) cells using a perfusion bioreactor. Perfusion culture at 37°C yielded a high cell density but a low FSH production. To investigate the effect of culture temperature in the range of 26–37°C on cell growth and FSH production, batch cultures were performed. Lowering culture temperature below 32°C resulted in growth suppression. However, specific productivity of FSH, q _FSH, increased as culture temperature decreased, and the maximum q _FSH of 43.4 ng/10⁶ cells/h was obtained at 28°C, which is 13-fold higher than that at 37°C. Based on the results obtained from batch cultures, we performed perfusion cultures with two consecutive temperatures. CHO cells were grown up to 3.2 × 10⁷ cells/ml at 37°C and culture temperature shifted down to 28°C to obtain a high FSH titer. Soon after the maximum FSH titer of 21 μg/ml was achieved, a rapid loss of not only viable cell concentration but also cell viability was observed, probably due to the low activities of enzymes related to cell growth. Thus, the extension of production period at 28°C is critical for the enhancement of FSH production, and the use of antiapoptotic genes seems to be promising.     

Retroviral vector production using suspension-adapted 293GPG cells in a 3L acoustic filter-based perfusion bioreactor

Recombinant retroviruses are now an established tool for gene delivery. Presently they are mainly produced using adherent cells. However, due to the restrictive nature of adherent cell culture, this mode of production is hampered by low cell-specific productivity and small production units. The large-scale production of retroviral vectors could benefit from the adaptation of retrovirus packaging cell lines to suspension culture. Here, we describe the ability of a 293 packaging cell line to produce retroviral vectors in suspension culture at high titer. Adherent 293GPG cells, producing a Moloney Murine Leukemia Virus (MoMLV) retrovirus vector pseudotyped with the vesicular stomatitis virus G (VSVG) envelope protein and expressing a TK-GFP fusion protein, were adapted to suspension culture in calcium-free DMEM. At a cell density similar to adherent cell culture, the suspension culture produced retroviral vector consistently in the range of 1 x 10(7) infectious viral particles/mL (IVP/mL), with a specific productivity threefold higher than adherent culture. Furthermore, at the same medium replacement frequency, the suspension producer cells could be cultured at higher density than their adherent counterparts, which resulted in virus titer of 3-4 x 10(7) IVP/mL at 11.0 x 10(6) cells/mL. This corresponds to a 10-fold increase in viral concentration compared to adherent cells. The capacity to up scale the retroviral vector production was also demonstrated by performing a 2 VVD perfusion culture for 9 days in a 3L Chemap bioreactor. The combination of suspension and perfusion led to a 20-fold increase in maximum virus productivity compared to the adherent culture.     

Error propagation from prime variables into specific rates and metabolic fluxes for mammalian cells in perfusion culture

Error propagation from prime variables into specific rates and metabolic fluxes was quantified for high‐concentration CHO cell perfusion cultivation. Prime variable errors were first determined from repeated measurements and ranged from 4.8 to 12.2%. Errors in nutrient uptake and metabolite/product formation rates for 5–15% error in prime variables ranged from 8–22%. The specific growth rate, however, was characterized by higher uncertainty as 15% errors in the bioreactor and harvest cell concentration resulted in 37.8% error. Metabolic fluxes were estimated for 12 experimental conditions, each of 10 day duration, during 120‐day perfusion cultivation and were used to determine error propagation from specific rates into metabolic fluxes. Errors of the greater metabolic fluxes (those related to glycolysis, lactate production, TCA cycle and oxidative phosphorylation) were similar in magnitude to those of the related greater specific rates (glucose, lactate, oxygen and CO₂ rates) and were insensitive to errors of the lesser specific rates (amino acid catabolism and biosynthesis rates). Errors of the lesser metabolic fluxes (those related to amino acid metabolism), however, were extremely sensitive to errors of the greater specific rates to the extent that they were no longer representative of cellular metabolism and were much less affected by errors in the lesser specific rates. We show that the relationship between specific rate and metabolic flux error could be accurately described by normalized sensitivity coefficients, which were readily calculated once metabolic fluxes were estimated. Their ease of calculation, along with their ability to accurately describe the specific rate‐metabolic flux error relationship, makes them a necessary component of metabolic flux analysis. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Morphological differentiation of endothelial cells co-cultured with astrocytes on type-I or type-IV collagen

Summary In this study bovine aortic endothelial cells were co-cultured with astrocytes from fetal Wistar Kyoto rats. Endothelial cells growing on type-I collagen, development. Although some cells appeared to be mature, horseradish peroxidase penetrated within 1 min of incubation through the intercellular junctions of these endothelial elements maintained on type-I collagen. In contrast, endothelial cells on type-IV collagen, co-cultured with astrocytes, were well developed; their intercellular junctions were well established, and plasmalemmal vesicles reduced in number. As a result, horseradish peroxidase was unable to penetrate through the endothelial cells grown on type-IV collagen and co-cultured with astrocytes because of the reduced extent of the junctional and vesicular transport. These findings reveal that (1) type-IV collagen is essential for the differentiation of endothelial cells, (2) endothelial cell-astrocyte interactions occur during co-culture, and (3) endothelial permeability depends on astrocyte-produced factors, in addition to type-IV collagen.     

An electroporation protocol for efficient DNA transfection in PC12 cells

A wide variety of mammalian cell types is used in gene transfection studies. Establishing transfection methods that enable highly efficient DNA uptake has become increasingly important. PC12 is an established rat pheochromocytoma cell line, which responds to exposure to NGF with cessation of growth, expression of cytoplasmic processes, and differentiation into cells resembling sympathetic neurons. Although PC12 cells represent an important model system to study a variety of neuronal functions, they proved relatively difficult to transfect. We have compared the efficiency of three different chemical transfection reagents (Lipofectamine 2000, Lipofectamine LTX and TransIT-LT1) and of two electroporation systems (Neon and Gene Pulser Xcell) in transiently transfecting undifferentiated PC12 cells. By comparing efficiencies from replicate experiments we proved electroporation (in particular Neon) to be the method of choice. By optimizing different parameters (voltage, pulse width and number of pulses) we reached high efficiency of transfection (90 %) and viability (99 %). We also demonstrated that, upon electroporation, cells are not altered by the transfection and maintain their ability to differentiate.     

Madin–Darby canine kidney cells are increased in aerobic glycolysis when cultured on flat and stiff collagen‐coated surfaces rather than in physiological 3‐D cultures

We investigate the influence of the dimensionality and the biochemistry of the culture system on the cellular functionality by analyzing the protein expression levels in Madin–Darby canine kidney (MDCK) cells grown in 3‐D and 2‐D substrates. We cultured MDCK cells on a hard and flat 2‐D uncoated plastic surface, on a 2‐D collagen‐coated plastic surface and in 3‐D collagen gel and employed 2‐D gel electrophoresis, MALDI‐TOF‐MS, and LC‐MS/MS analysis to identify the differentially regulated proteins. We found significant differences in the expression of antioxidant proteins, actin‐binding proteins, glycolytic enzymes, and heat‐shock proteins/chaperons among the three types of cultures. While MDCK cells cultured in 3‐D collagen up‐regulate antioxidant proteins and proteins involved in the dynamic remodeling of the actin cytoskeleton, 2‐D collagen‐coated plastic surfaces induce the up‐regulation of glycolytic enzymes. Our data shows that the culture conditions have profound effects on the physiology of the cell. Culture in 3‐D collagen induces a differentiated polarized phenotype. In contrast, collagen‐coated 2‐D substrates favor a tumor‐like phenotype with increased glycolysis. Thus, the suitability of 2‐D cultures to study the physiological behavior of cells, especially in drug discovery, bioprocessing, and toxicology, should be carefully reconsidered.     

Differential expression of cell surface proteins in human bone marrow mesenchymal stem cells cultured with or without basic fibroblast growth factor containing medium

Mesenchymal stem cells (MSCs) are multipotent cells, which have the capability to differentiate into various mesenchymal tissues such as bone, cartilage, fat, tendon, muscle, and marrow stroma. However, they lose the capability of multi‐lineage differentiation after several passages. It is known that basic fibroblast growth factor (bFGF) increases growth rate, differentiation potential, and morphological changes of MSCs in vitro. In this report, we have used 2‐DE coupled to MS to identify differentially expressed proteins at the cell membrane level in MSCs growing in bFGF containing medium. The cell surface proteins isolated by the biotin–avidin affinity column were separated by 2‐DE in triplicate experiments. A total of 15 differentially expressed proteins were identified by quadrupole‐time of flight tandem MS. Nine of the proteins were upregulated and six proteins were downregulated in the MSCs cultured with bFGF containing medium. The expression level of three actin‐related proteins, F‐actin‐capping protein subunit alpha‐1, actin‐related protein 2/3 complex subunit 2, and myosin regulatory light chain 2, was confirmed by Western blot analysis. The results indicate that the expression levels of F‐actin‐capping protein subunit alpha‐1, actin‐related protein 2/3 complex subunit 2, and myosin regulatory light chain 2 are important in bFGF‐induced morphological change of MSCs.     

Evaluation of the serum-free medium MDSS2 for the production of poliovirus on vero cells in bioreactors

The serum-free medium MDSS2 (Merten et al., 1994), was used for cultivating Vero cells as well as for producing poliovirus (Sabin type 1) in static and in perfused micro-carrier cultures. At slightly different growth rates of 0.0120/h and 0.0106/h, respectively, static cultures in serum-containing (SCM) and serum-free (SFM) medium produced titers of ^106.75 and 10^6.67 TCID50 per 50 μl; signifying a specific productivity of 0.89 and 1.07 TCID50/c. Serum-free bioreactor cultures of Vero cells on DEAE-dextran microcarriers at 6.25 g/l produced cell densities of about 1.5×10⁶c/ml. After infection with virus (multiplicity of infection (MOI) 0.1–0.3) titers of about 6.3×10⁸ TCID50/ml were obtained, signifying an average specific productivity of 7.1 TCID50/c.h. Although these values were 4 and 2 fold, respectively, higher than in classical resum-based production processes (Montagnon et al. Dev. biol. Stand. 1981, 47, 55), a reference culture, for which cell growth was done in SCM and only virus production was done in SFM, produced 2×10⁹ TCID/ml with an average specific virus production rate of 18.9 TCID50/c.h. The differences between the fully serum-free and our reference process were mainly due to physiological differences of cells grown in SCM and SFM and also due to strongly modified consumption kinetics after virus infection leading to limitations of one or several essential medium compounds, like glucose and amino acids. Avoiding these limitations by increasing the residual concentration of glucose, glutamine, histidine, and SH-amino acids, led to specific virus production rates (of about 17.9 TCID59/c.h.) comparable to those found in the reference virus production process. The optimisation of the production of the poliovirus (Sabin 1) will be described with respect to the modification of the medium composition. This revised version was published online in June 2006 with corrections to the Cover Date.     

Effect of culture pH on erythropoietin production by Chinese hamster ovary cells grown in suspension at 32.5 and 37.0 degrees C

To investigate the effect of culture pH in the range of 6.85-7.80 on cell growth and erythropoietin (EPO) production at 32.5 and 37.0 degrees C, serum-free suspension cultures of recombinant CHO cells (rCHO) were performed in a bioreactor with pH control. Lowering culture temperature from 37.0 to 32.5 degrees C suppressed cell growth, but cell viability remained high for a longer culture period. Regardless of culture temperature, the highest specific growth rate (mu) and maximum viable cell concentration were obtained at pH values of 7.00 and 7.20, respectively. Like mu, the specific consumption rates of glucose and glutamine decreased at 32.5 degrees C compared to 37.0 degrees C. In addition, they increased with increasing culture pH. Culture pH at 32.5 degrees C affected specific EPO productivity (q(EPO)) in a different fashion from that at 37 degrees C. At 37 degrees C, the q(EPO) was fairly constant in the pH range of 6.85-7.80, while at 32.5 degrees C, the q(EPO) was significantly influenced by culture pH. The highest q(EPO) was obtained at pH 7.00 and 32.5 degrees C, and its value was approximately 1.5-fold higher than that at pH 7.00 and 37.0 degrees C. The proportion of acidic EPO isoforms, which is a critical factor for high in vivo biological activity of EPO, was highest in the stationary phase of growth, regardless of culture temperature and pH. Although cell viability rapidly decreased in death phase at both 32.5 and 37.0 degrees C, the significant degradation of produced EPO, probably by the action of proteases released from lysed cells, was observed only at 37.0 degrees C. Taken together, through the optimization of culture temperature and pH, a 3-fold increase in maximum EPO concentration and a 1.4-fold increase in volumetric productivity were obtained at pH 7.00 and 32.5 degrees C when compared with those at 37.0 degrees C. These results demonstrate the importance of optimization of culture temperature and pH for enhancing EPO production in serum-free, suspension culture of rCHO cells.     

Maintenance of pluripotency in human embryonic stem cells cultured on a synthetic substrate in conditioned medium

Realizing the potential clinical and industrial applications of human embryonic stem cells (hESCs) is limited by the need for costly, labile, or undefined growth substrates. Here we demonstrate that trypsin passaging of the hESC lines, HUES7 and NOTT1, on oxygen plasma etched tissue culture polystyrene (PE‐TCPS) in conditioned medium is compatible with pluripotency. This synthetic culture surface is stable at room temperature for at least a year and is readily prepared by placing polystyrene substrates in a radio frequency oxygen plasma generator for 5 min. Modification of the polystyrene surface chemistry by plasma etching was confirmed by X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS), which identified elemental and molecular changes as a result of the treatment. Pluripotency of hESCs cultured on PE‐TCPS was gauged by consistent proliferation during serial passage, expression of stem cell markers (OCT4, TRA1‐60, and SSEA‐4), stable karyotype and multi‐germlayer differentiation in vitro, including to pharmacologically responsive cardiomyocytes. Generation of cost‐effective, easy‐to‐handle synthetic, defined, stable surfaces for hESC culture will expedite stem cell use in biomedical applications. Biotechnol. Bioeng. 2010;105: 130–140. © 2009 Wiley Periodicals, Inc.