NMR structure of the full-length linear dimer of stem-loop-1 RNA in the HIV-1 dimer initiation site

The packaging signal of HIV-1 RNA contains a stem-loop structure, SL1, which serves as the dimerization initiation site for two identical copies of the genome and is important for packaging of the RNA genome into the budding virion and for overall infectivity. SL1 spontaneously dimerizes via a palindromic hexanucleotide sequence in its apical loop, forming a metastable kissing dimer form. Incubation with nucleocapsid protein causes this form to refold to a thermodynamically stable mature linear dimer. Here, we present an NMR structure of the latter form of the full-length SL1 sequence of the Lai HIV-1 isolate. The structure was refined using nuclear Overhauser effect and residual dipolar coupling data. The structure presents a symmetric homodimer of two RNA strands of 35 nucleotides each; it includes five stems separated by four internal loops. The central palindromic stem is surrounded by two symmetric adenine-rich 1-2 internal loops, A-bulges. All three adenines in each A-bulge are stacked inside the helix, consistent with the solution structures of shorter SL1 constructs determined previously. The outer 4-base pair stems and, proximal to them, purine-rich 1-3 internal loops, or G-bulges, are the least stable parts of the molecule. The G-bulges display high conformational variability in the refined ensemble of structures, despite the availability of many structural restraints for this region. Nevertheless, most conformations share a similar structural motif: a guanine and an adenine from opposite strands form a GA mismatch stacked on the top of the neighboring stem. The two remaining guanines are exposed, one in the minor groove and another in the major groove side of the helix, consistent with secondary structure probing data for SL1. These guanines may be recognized by the nucleocapsid protein, which binds tightly to the G-bulge in vitro.     

Stem of SL1 RNA in HIV-1: structure and nucleocapsid protein binding for a 1 x 3 internal loop

The 5'-leader of HIV-1 RNA controls many viral functions. Nucleocapsid (NC) domains of gag-precursor proteins select genomic RNA for packaging by binding several sites in the leader. One is likely to be a stem defect in SL1 that can adopt either a 1 x 3 internal loop, SL1i (including G247, A271, G272, G273) or a 1 x 1 internal loop (G247 x G273) near a two-base bulge (A269-G270). It is likely that these two conformations are both present and exchange readily. A 23mer RNA construct described here models SL1i and cannot slip into the alternate form. It forms a 1:1 complex with NCp7, which interacts most strongly at G247 and G272 (K(d) = 140 nM). This demonstrates that a linear G-X-G sequence is unnecessary for high-affinity binding. The NMR-based structure shows an easily broken G247:A271 base pair. G247 stacks on both of its immediate neighbors and A271 on its 5'-neighbor; G272 and G273 are partially ordered. A bend in the helix axis between the SL1 stems on either side of the internal loop is probable. An important step in maturation of the virus is the transition from an apical loop-loop interaction to a dimer involving intermolecular interactions along the full length of SL1. A bend in the stem may be important in relieving strain and ensuring that the strands do not become entangled during the transition. A stem defect with special affinity for NCp7 may accelerate the rate of the dimer transformation. This complex could become an important target for anti-HIV drug development, where a drug could exert its action near a high-energy intermediate on the pathway for maturation of the dimer.     

NMR structure of stem-loop SL2 of the HIV-1 psi RNA packaging signal reveals a novel A-U-A base-triple platform

The genome of the human immunodeficiency virus type-1 (HIV-1) contains a stretch of approximately 120 nucleotides known as the psi-site that is essential for RNA packaging during virus assembly. These nucleotides have been proposed to form four stem-loops (SL1-SL4) that have both independent and overlapping functions. Stem-loop SL2 is important for efficient recognition and packaging of the full-length, unspliced viral genome, and also contains the major splice-donor site (SD) for mRNA splicing. We have determined the structure of the 19-residue SL2 oligoribonucleotide by heteronuclear NMR methods. The structure is generally consistent with the most recent of two earlier secondary structure predictions, with residues G1-G2-C3-G4 and C6-U7 forming standard Watson Crick base-pairs with self-complementary residues C16-G17-C18-C19 and A12-G13, respectively. However, residue A15, which is located near the center of the stem, does not form a predicted bulge, and residues A5 and U14 do not form an expected Watson-Crick base-pair. Instead, these residues form a novel A5-U14-A15 base-triple that appears to be stabilized by hydrogen bonds from A15-H61 and -H62 to A5-N1 and U14-O2, respectively; from A5-H61 to U14-O2, and from C16-H42 to U14-O2'. A kink in the backbone allows the aromatic rings of the sequential U14-A15 residues to be approximately co-planar, adopting a stable "platform motif" that is structurally similar to the A-A (adenosine) platforms observed in the P4-P6 ribozyme domain of the Tetrahymena group I intron. Platform motifs generally function in RNA by mediating long-range interactions, and it is therefore possible that the A-U-A base-triple platform mediates long-range interactions that either stabilize the psi-RNA or facilitate splicing and/or packaging. Residue G8 of the G8-G9-U10-G11 tetraloop is stacked above the U7-A12 base-pair, and the remaining tetraloop residues are disordered and available for potential interactions with either other RNA or protein components.     

Requirements for kissing-loop-mediated dimerization of human immunodeficiency virus RNA.

Sequences from the 5' end of type 1 human immunodeficiency virus RNA dimerize spontaneously in vitro in a reaction thought to mimic the initial step of genomic dimerization in vivo. Dimer initiation has been proposed to occur through a "kissing-loop" interaction involving a specific RNA stem-loop element designated SL1: the RNA strands first interact by base pairing through a six-base GC-rich palindrome in the loop of SL1, whose stems then isomerize to form a longer interstrand duplex. We now report a mutational analysis aimed at defining the features of SL1 RNA sequence and secondary structure required for in vitro dimer formation. Our results confirm that mutations which destroy complementarity in the SL1 loop abolish homodimer formation, but that certain complementary loop mutants can heterodimerize. However, complementarity was not sufficient to ensure dimerization, even between GC-rich loops, implying that specific loop sequences may be needed to maintain a conformation that is competent for initial dimer contact; the central GC pair of the loop palindrome appeared critical in this regard, as did two or three A residues which normally flank the palindrome. Neither the four-base bulge normally found in the SL1 stem nor the specific sequence of the stem itself was essential for the interaction; however, the stem structure was required, because interstrand complementarity alone did not support dimer formation. Electron microscopic analysis indicated that the RNA dimers formed in vitro morphologically resembled those isolated previously from retroviral particles. These results fully support the kissing-loop model and may provide a framework for systematically manipulating genomic dimerization in type 1 human immunodeficiency virus virions.     

Solution structure of the SL1 RNA of the M1 double-stranded RNA virus of Saccharomyces cerevisiae

The 20-nucleotide SL1 VBS RNA, 5'-GGAGACGC[GAUUC]GCGCUCC (bulged A underlined and loop bases in brackets), plays a crucial role in viral particle binding to the plus strand and packaging of the RNA. Its structure was determined by NMR spectroscopy. Structure calculations gave a precisely defined structure, with an average pairwise root mean square deviation (RMSD) of 1.28 A for the entire molecule, 0.57 A for the loop region (C8-G14), and 0.46 A for the bulge region (G4-G7, C15-C17). Base stacking continues for three nucleotides on the 5' side of the loop. The final structure contains a single hydrogen bond involving the guanine imino proton and the carbonyl O(2) of the cytosine between the nucleotides on the 5' and 3' ends of the loop, although they do not form a Watson-Crick base pair. All three pyrimidine bases in the loop point toward the major groove, which implies that Cap-Pol protein may recognize the major groove of the SL1 loop region. The bulged A5 residue is stacked in the stem, but nuclear Overhauser enhancements (NOEs) suggest that A5 spends part of the time in the bulged-out conformation. The rigid conformation of the upper stem and loop regions may allow the SL1 VBS RNA to interact with Cap-Pol protein without drastically changing its own conformation.     

Nucleocapsid protein-mediated maturation of dimer initiation complex of full-length SL1 stemloop of HIV-1: sequence effects and mechanism of RNA refolding

Specific binding of HIV-1 viral protein NCp7 to a unique 35-base RNA stem-loop SL1 is critical for formation and packaging of the genomic RNA dimer found within HIV-1 virions. NCp7 binding stimulates refolding of SL1 from a metastable kissing dimer (KD) into thermodynamically stable linear dimer (LD). Using UV melting, gel electrophoresis and heteronuclear NMR, we investigated effects of various site-specific mutations within the full-length SL1 on temperature- or NCp7-induced refolding in vitro. Refolding involved intramolecular melting of SL1 stems but not dissociation of the intermolecular KD interface. Refolding required only two NCp7 molecules per KD but was limited by the amount of NCp7 present, implying that the protein does not catalytically promote refolding. Efficient refolding depended strictly on the presence and, to a lesser degree, on sequence of a highly conserved G-rich internal loop that normally limits thermal stability of the SL1 stem. Adding two base pairs to the lower stem created a hyperstable SL1 mutant that failed to refold, even when bound by NCp7at high stoichiometries. NMR analysis of these kinetically trapped mutant RNA–protein complexes indicated that NCp7 initiates refolding by dissociating base pairs in the upper stem of SL1. This study illuminates structural transitions critical for HIV-1 assembly and replication.     

Dimer initiation sequence of HIV-1Lai genomic RNA: NMR solution structure of the extended duplex.

The genome of all retrovirus consists of two copies of genomic RNA which are noncovalently linked near their 5' end. A sequence localized immediately upstream from the splice donor site inside the HIV-1 psi-RNA region was identified as the domain responsible for the dimerization initiation. It was shown that a kissing complex and a stable dimer are both involved in the HIV-1Lai RNA dimerization process in vitro. The NCp7 protein activates the dimerization by converting a transient loop-loop complex into a more stable dimer. The structure of this transitory loop-loop complex was recently elucidated by Mujeeb et al. In work presented here, we use NMR spectroscopy to determine the stable extended dimer structure formed from a 23 nucleotides RNA fragment, part of the 35 nucleotides SL1 sequence. By heating to 90 degrees C, then slowly cooling this sequence, we were able to show that an extended dimer is formed. We present evidence for the three dimensional structure of this dimer. NMR data yields evidence for a zipper like motif A8A9.A16 existence. This motif enables the surrounding bases to be positioned more closely and permit the G7 and C17 bases to be paired. This is different to other related sequences where only the kissing complex is observed, we suggest that the zipper like motif AA.A could be an important stabilization factor of the extended duplex.     

HIV-1(Lai) genomic RNA: combined used of NMR and molecular dynamics simulation for studying the structure and internal dynamics of a mutated SL1 hairpin

The genome of all retroviruses consists of two identical copies of an RNA sequence associated in a non-covalent dimer. A region upstream from the splice donor (SL1) comprising a self-complementary sequence is responsible for the initiation of the dimerization. This region is able to dimerize in two conformations: a loop-loop complex or an extended duplex. Here, we solve by 2D NMR techniques the solution structure of a 23-nucleotide sequence corresponding to HIV-1 SL1(Lai) in which the mutation G12-->A12 is included to prevent dimerization. It is shown that this monomer adopts a stem-loop conformation with a seven base pairs stem and a nine nucleotide loop containing the G10 C11 A12 C13 G14 C15 sequence. The stem is well structured in an A-form duplex, while the loop is more flexible even though elements of structure are evident. We show that the structure adopted by the stem can be appreciably different from its relaxed structure when the adenines A8, A9 and A16 in the loop are mechanically constrained. This point could be important for the efficiency of the dimerization. This experimental study is complemented with a 10 ns molecular dynamics simulation in the presence of counterions and explicit water molecules. This simulation brings about information on the flexibility of the loop, such as a hinge motion between the stem and the loop and a labile lattice of hydrogen bonds in the loop. The bases of the nucleotides G10 to C15 were found outside of the loop during a part of the trajectory, which is certainly necessary to initiate the dimerization process of the genuine SL1(Lai) sequence.     

On the stability of different experimental dimeric structures of the SL1 sequence from the genomic RNA of HIV-1 in solution: a molecular dynamics simulation and electrophoresis study

SL1 is a stem-loop RNA sequence from the genome of HIV-1 thought to be the initiation site for the dimerization of the retroviral genomic RNA. The aim of this study is to check the stability in solution of different experimental dimeric structures available in the literature. Two kinds of dimer have been evidenced: an extended duplex looking like a double helix with two internal bulges and a kissing complex in which the monomers with a stem/loop conformation are linked by intermolecular loop-loop interactions. Two divergent experimental structures of the kissing complex from the Lai isolate are reported in the literature, one obtained from NMR (Mujeeb et al., Nature Structural Biology, 1998, Vol. 5, pp. 432-436) and the other one from x-ray crystallography (Ennifar et al., Nature Structural Biology, 2001, Vol. 8, pp. 1064-1068). A crystallographic structure of the Mal isolate was also reported (Ennifar et al., Nature Structure Biology, 2001, Vol. 8, pp. 1064-1068). Concerning the extended duplex, a NMR structure is available for Lai (Girard et al., Journal of Biomolecular Structure and Dynamics, 1999, Vol. 16, pp. 1145-1157) and a crystallographic structure for Mal (Ennifar et al., Structure, 1999, Vol. 7, pp. 1439-1449). Using a molecular dynamics technique, all these experimental structures have been simulated in solution with explicit water and counterions. We show that both extended duplex structures are stable. On the contrary, the crystallographic structures of the Lai and Mal kissing complexes are rapidly destabilized in aqueous environment. Finally, the NMR structure of the Lai loop-loop kissing complex remains globally stable over a 20 ns MD simulation, although large rearrangements occur at the level of the stem/loop junctions that are flexible, as shown from free energy calculations. These results are compared to electrophoresis experiments on dimer formation.     

Resolving fast and slow motions in the internal loop containing stem-loop 1 of HIV-1 that are modulated by Mg2+ binding: role in the kissing-duplex structural transition

Stem loop 1 (SL1) is a highly conserved hairpin in the 5′-leader of the human immunodeficiency virus type I that forms a metastable kissing dimer that is converted during viral maturation into a stable duplex with the aid of the nucleocapsid (NC) protein. SL1 contains a highly conserved internal loop that promotes the kissing–duplex transition by a mechanism that remains poorly understood. Using NMR, we characterized internal motions induced by the internal loop in an SL1 monomer that may promote the kissing–duplex transition. This includes micro-to-millisecond secondary structural transitions that cause partial melting of three base-pairs above the internal loop making them key nucleation sites for exchanging strands and nanosecond rigid-body stem motions that can help bring strands into spatial register. We show that while Mg²⁺ binds to the internal loop and arrests these internal motions, it preserves and/or activates local mobility at internal loop residues G272 and G273 which are implicated in NC binding. By stabilizing SL1 without compromising the accessibility of G272 and G273 for NC binding, Mg²⁺ may increase the dependence of the kissing–duplex transition on NC binding thus preventing spontaneous transitions from taking place and ensuring that viral RNA and protein maturation occur in concert.     

NMR structure of the HIV-1 nucleocapsid protein bound to stem-loop SL2 of the psi-RNA packaging signal. Implications for genome recognition

The RNA genome of the human immunodeficiency virus type-1 (HIV-1) contains a approximately 120 nucleotide Psi-packaging signal that is recognized by the nucleocapsid (NC) domain of the Gag polyprotein during virus assembly. The Psi-site contains four stem-loops (SL1-SL4) that possess overlapping and possibly redundant functions. The present studies demonstrate that the 19 residue SL2 stem-loop binds NC with affinity (K(d)=110(+/-50) nM) similar to that observed for NC binding to SL3 (K(d)=170(+/-65) nM) and tighter than expected on the basis of earlier work, suggesting that NC-SL2 interactions probably play a direct role in the specific recognition and packaging of the full-length, unspliced genome. The structure of the NC-SL2 complex was determined by heteronuclear NMR methods using (15)N,(13)C-isotopically labeled NC protein and SL2 RNA. The N and C-terminal "zinc knuckles" (Cys-X(2)-Cys-X(4)-His-X(4)-Cys; X=variable amino acid) of HIV-1 NC bind to exposed guanosine bases G9 and G11, respectively, of the G8-G9-U10-G11 tetraloop, and residues Lys3-Lys11 of the N-terminal tail forms a 3(10) helix that packs against the proximal zinc knuckle and interacts with the RNA stem. These structural features are similar to those observed previously in the NMR structure of NC bound to SL3. Other features of the complex are substantially different. In particular, the N-terminal zinc knuckle interacts with an A-U-A base triple platform in the minor groove of the SL2 RNA stem, but binds to the major groove of SL3. In addition, the relative orientations of the N and C-terminal zinc knuckles differ in the NC-SL2 and NC-SL3 complexes, and the side-chain of Phe6 makes minor groove hydrophobic contacts with G11 in the NC-SL2 complex but does not interact with RNA in the NC-SL3 complex. Finally, the N-terminal helix of NC interacts with the phosphodiester backbone of the SL2 RNA stem mainly via electrostatic interactions, but does not bind in the major groove or make specific H-bonding contacts as observed in the NC-SL3 structure. These findings demonstrate that NC binds in an adaptive manner to SL2 and SL3 via different subsets of inter and intra-molecular interactions, and support a genome recognition/packaging mechanism that involves interactions of two or more NC domains of assembling HIV-1 Gag molecules with multiple Psi-site stem-loop packaging elements during the early stages of retrovirus assembly.     

Noncovalent probes for the investigation of structure and dynamics of protein-nucleic acid assemblies: the case of NC-mediated dimerization of genomic RNA in HIV-1

The nature of specific RNA-RNA and protein-RNA interactions involved in the process of genome dimerization and isomerization in HIV-1, which is mediated in vitro by stemloop 1 (SL1) of the packaging signal and by the nucleocapsid (NC) domain of the viral Gag polyprotein, was investigated by using archetypical nucleic acid ligands as noncovalent probes. Small-molecule ligands make contact with their target substrates through complex combinations of H-bonds, salt bridges, and hydrophobic interactions. Therefore, their binding patterns assessed by electrospray ionization mass spectrometry can provide valuable insights into the factors determining specific recognition between species involved in biopolymer assemblies. In the case of SL1, dimerization and isomerization create unique structural features capable of sustaining stable interactions with classic nucleic acid ligands. The binding modes exhibited by intercalators and minor groove binders were adversely affected by the significant distortion of the duplex formed by palindrome annealing in the kissing-loop (KL) dimer, whereas the modes observed for the corresponding extended duplex (ED) confirmed a more regular helical structure. Consistent with the ability to establish electrostatic interactions with highly negative pockets typical of helix anomalies, polycationic aminoglycosides bound to the stem-bulge motif conserved in all SL1 conformers, to the unpaired nucleotides located at the hinge between kissing hairpins in KL, and to the exposed bases flanking the palindrome duplex in ED. The patterns afforded by intercalators and minor groove binders did not display detectable variations when the corresponding NC-SL1 complexes were submitted to probing. In contrast, aminoglycosides displayed the ability to compete with the protein for overlapping sites, producing opposite effects on the isomerization process. Indeed, displacing NC from the stem-bulges of the KL dimer induced inhibition of stem melting and decreased the efficiency of isomerization. Competition for the hinge region, instead, eliminated the NC stabilization of a grip motif formed by nucleobases of opposite strands, thus facilitating the strand-exchange required for isomerization. These noncovalent probes provided further evidence that the structural context of the actual binding sites has significant influence on the chaperone activities of NC, which should be taken in account when developing potential drug candidates aimed at disrupting genome dimerization and isomerization in HIV-1.     

SL1 revisited: functional analysis of the structure and conformation of HIV-1 genome RNA

Background

The dimer initiation site/dimer linkage sequence (DIS/DLS) region of HIV is located on the 5′ end of the viral genome and suggested to form complex secondary/tertiary structures. Within this structure, stem-loop 1 (SL1) is believed to be most important and an essential key to dimerization, since the sequence and predicted secondary structure of SL1 are highly stable and conserved among various virus subtypes. In particular, a six-base palindromic sequence is always present at the hairpin loop of SL1 and the formation of kissing-loop structure at this position between the two strands of genomic RNA is suggested to trigger dimerization. Although the higher-order structure model of SL1 is well accepted and perhaps even undoubted lately, there could be stillroom for consideration to depict the functional SL1 structure while in vivo (in virion or cell).

Results

In this study, we performed several analyses to identify the nucleotides and/or basepairing within SL1 which are necessary for HIV-1 genome dimerization, encapsidation, recombination and infectivity. We unexpectedly found that some nucleotides that are believed to contribute the formation of the stem do not impact dimerization or infectivity. On the other hand, we found that one G–C basepair involved in stem formation may serve as an alternative dimer interactive site. We also report on our further investigation of the roles of the palindromic sequences on viral replication. Collectively, we aim to assemble a more-comprehensive functional map of SL1 on the HIV-1 viral life cycle.

Conclusion

We discovered several possibilities for a novel structure of SL1 in HIV-1 DLS. The newly proposed structure model suggested that the hairpin loop of SL1 appeared larger, and genome dimerization process might consist of more complicated mechanism than previously understood. Further investigations would be still required to fully understand the genome packaging and dimerization of HIV.

     

Insight into the intrinsic flexibility of the SL1 stem-loop from genomic RNA of HIV-1 as probed by molecular dynamics simulation

The SL1 stem-loop is the dimerization initiation site for linking the two copies of the RNA forming the HIV-1 genome. The 26 nucleotides stem contains a defect consisting on a highly conserved G-rich 1-3 asymmetrical internal loop, which is a major site for nucleocapsid protein binding. Several NMR attempts were undertaken to determine the internal loop structure in the SL1 monomer. However, the RNA constructs used in the different studies were largely mutated, in particular with replacement of the nine nucleotides apical loop by a tetraloop, and divergent results were obtained ranging from a rigid structure to a particularly large flexibility. To investigate the reasons for such discrepancies, we used molecular dynamics simulation of the SL1 monomer to probe the effect of mutations on the conformational stability of the internal loop and of the whole stem. It is found that in the wild-type sequence, the internal loop displays conformational variability originating mainly from the nine nucleotides apical loop flexibility that causes large conformational fluctuations (without changing the average structure) in the 7 bp duplex linking the apical and internal loops. The large amplitude atomic motions in the duplex are transmitted to the internal loop in which they induce conformational changes characterized by a labile hydrogen bond network such as G5 successively H-bonded to A29 and G30. On the contrary, with a four nucleotides apical loop, conformational fluctuations in the duplex are reduced by a factor of 2 and are not sufficiently energizing for promoting changes in the internal loop structure at the time scale of the simulations.     

Interlocked mismatch-aligned arrowhead DNA motifs.

BACKGROUND: Triplet repeat sequences are of considerable biological importance as the expansion of such tandem arrays can lead to the onset of a range of human diseases. Such sequences can self-pair via mismatch alignments to form higher order structures that have the potential to cause replication blocks, followed by strand slippage and sequence expansion. The all-purine d(GGA)n triplet repeat sequence is of particular interest because purines can align via G.G, A.A and G.A mismatch formation. RESULTS: We have solved the structure of the uniformly 13C,15N-labeled d(G1-G2-A3-G4-G5-A6-T7) sequence in 10 mM Na+ solution. This sequence adopts a novel twofold-symmetric duplex fold where interlocked V-shaped arrowhead motifs are aligned solely via interstrand G1.G4, G2.G5 and A3.A6 mismatch formation. The tip of the arrowhead motif is centered about the p-A3-p step, and symmetry-related local parallel-stranded duplex domains are formed by the G1-G2-A3 and G4-G5-A6 segments of partner strands. CONCLUSIONS: The purine-rich (GGA)n triplet repeat sequence is dispersed throughout the eukaryotic genome. Several features of the arrowhead duplex motif for the (GGA)2 triplet repeat provide a unique scaffold for molecular recognition. These include the large localized bend in the sugar-phosphate backbones, the segmental parallel-stranded alignment of strands and the exposure of the Watson-Crick edges of several mismatched bases.     

Possible role of dimerization in human immunodeficiency virus type 1 genome RNA packaging

The dimer initiation site/dimer linkage sequence (DIS/DLS) region in the human immunodeficiency virus type 1 (HIV-1) RNA genome is suggested to play important roles in various steps of the virus life cycle. However, due to the presence of a putative DIS/DLS region located within the encapsidation signal region (E/psi), it is difficult to perform a mutational analysis of DIS/DLS without affecting the packaging of RNA into virions. Recently, we demonstrated that duplication of the DIS/DLS region in viral RNA caused the production of partially monomeric RNAs in virions, indicating that the region indeed mediated RNA-RNA interaction. We utilized this system to assess the precise location of DIS/DLS in the 5' region of the HIV-1 genome with minimum effect on RNA packaging. We found that the entire lower stem of the U5/L stem-loop was required for packaging, whereas the region important for dimer formation was only 10 bases long within the lower stem of the U5/L stem-loop. The R/U5 stem-loop was required for RNA packaging but was completely dispensable for dimer formation. The SL1 lower stem was important for both dimerization and packaging, but surprisingly, deletion of the palindromic sequence at the top of the loop only partially affected dimerization. These results clearly indicated that the E/psi of HIV-1 is much larger than the DIS/DLS and that the primary DIS/DLS is completely included in the E/psi. Therefore, it is suggested that RNA dimerization is a part of RNA packaging, which requires multiple steps.     

197 Modeling the maturation pathway of the HIV-1 5’-UTR RNA dimer

HIV-1 genomic RNA is packaged as a dimer into the virions. The initial metastable RNA dimer is believed to be formed by virtue of “kissing interactions” between two copies of the palindromic apical loops of stem-loop SL1 of the 5’-untranslated region (5’-UTR) of the genomic RNA. Viral nucleocapsid protein NCp7 promotes maturation of the RNA dimer into more stable form, which involves extended or linear form of SL1 dimer (reviewed in Paillart et al., 2004; Moore & Hu, 2009; Lu et al., 2011). In vitro experiments have shown that this conversion occurs at stoichiometric amounts of NCp7 without breaking interactions between the two copies of the SL1 apical loops (Mujeeb et al., 2007). We have proposed a hypothetical pathway and calculated models of the intermediate structures for the SL1 stem-loop dimer maturation that does not require simultaneous dissociation of all base pairs in SL1 stems; this pathway involves formation of an RNA analog of the Holliday junction intermediate between the two stems of the SL1 dimer and a following branch migration towards the palindromic duplex (Ulyanov et al., 2011). Here, we extend these models to the dimer of the 1–344 fragment of HIV-1 RNA, which includes all of the 5’-UTR and the gag start AUG codon region, and show that the branch-migration mechanism of the dimer maturation is also feasible for the full 5’-UTR RNA. All RNA models have been calculated with the miniCarlo program (Zhurkin et al., 1991).     

Non-nearest-neighbor dependence of the stability for RNA group II single-nucleotide bulge loops

Thirty-one RNA duplexes containing single-nucleotide bulge loops were optically melted in 1 M NaCl, and the thermodynamic parameters ΔH°, ΔS°, ΔG°(37), and T(M) for each sequence were determined. The bulge loops were of the group II variety, where the bulged nucleotide is identical to one of its nearest neighbors, leading to ambiguity as to the exact position of the bulge. The data were used to develop a model to predict the free energy of an RNA duplex containing a single-nucleotide bulge. The destabilization of the duplex by the bulge was primarily related to the stability of the stems adjacent to the bulge. Specifically, there was a direct correlation between the destabilization of the duplex and the stability of the less stable duplex stem. Since there is an ambiguity of the bulge position for group II bulges, several different stem combinations are possible. The destabilization of group II bulge loops is similar to the destabilization of group I bulge loops, if the second least stable stem is used to predict the influence of the group II bulge. In-line structure probing of the group II bulge loop embedded in a hairpin indicates that the bulged nucleotide is the one positioned farther from the hairpin loop.     

Interaction of the HIV-1 frameshift signal with the ribosome

Ribosomal frameshifting on viral RNAs relies on the mechanical properties of structural elements, often pseudoknots and more rarely stem-loops, that are unfolded by the ribosome during translation. In human immunodeficiency virus (HIV)-1 type B a long hairpin containing a three-nucleotide bulge is responsible for efficient frameshifting. This three-nucleotide bulge separates the hairpin in two domains: an unstable lower stem followed by a GC-rich upper stem. Toeprinting and chemical probing assays suggest that a hairpin-like structure is retained when ribosomes, initially bound at the slippery sequence, were allowed multiple EF-G catalyzed translocation cycles. However, while the upper stem remains intact the lower stem readily melts. After the first, and single step of translocation of deacylated tRNA to the 30 S P site, movement of the mRNA stem-loop in the 5′ direction is halted, which is consistent with the notion that the downstream secondary structure resists unfolding. Mechanical stretching of the hairpin using optical tweezers only allows clear identification of unfolding of the upper stem at a force of 12.8 ± 1.0 pN. This suggests that the lower stem is unstable and may indeed readily unfold in the presence of a translocating ribosome.     

Improved selectivity for the binding of naphthyridine dimer to guanine-guanine mismatch.

Naphthyridine dimer composed of two 2-amino-1,8-naphthyridines and a connecting linker strongly binds to guanine-guanine (G-G) mismatch in duplex DNA. In order to improve G-G selectivity for the binding, we have examined structure modification of the linker. A new naphthyridine dimer possessing 3,6-diazaoctanedioic acid linker binds to G-G mismatch with an association constant of 1.18 x 10(7) M(-1), which is somewhat weaker than that of the original naphthyridine dimer having a shorter connecting linker. However, the binding of the modified naphthyridine dimer to G-A mismatch was almost negligible as compared to that of the original. This results in a net increase of the selectivity for the binding to G-G mismatch by 4-folds.