Nucleotide sequence of the cryptic plasmid pTT8 from Thermus thermophilus HB8 and isolation and characterization of its high-copy-number mutant

The complete nucleotide sequence of pTT8, a cryptic plasmid from Thermus thermophilus HB8, was determined. pTT8 was 9328bp long and its G+C content was 69%. pTT8 contained eight putative open reading frames, three of which showed extensive similarities to the plasmid addiction proteins PasA and PasB of pTC-F14 and pAM10.6, and the RepA protein of the ColE2-related plasmids, respectively. During the analysis of pTT8-based plasmid pPP442, which had been obtained during a promoter-screening experiment, we occasionally isolated a plasmid with a relatively high-copy-number. This plasmid, pPP442m, contained a 1025 bp fragment derived from the genome of the HB27 host strain immediately upstream of the putative repA gene. Using the ori region of pPP442m, we constructed an expression vector, pTEV131m, with an estimated high-copy-number of 30-40. This plasmid was stably maintained in T. thermophilus HB27 under nonselective conditions for at least 100 generations. Cloning of the alpha-amylase gene of Bacillus stearothermophilus DY-5 into pTEV131m gave more than twofold production of the enzyme compared with pTEV131, the parental plasmid.     

A plasmid vector for an extreme thermophile, Thermus thermophilus

The host-vector system for an extreme thermophile, Thermus thermophilus HB27, was developed. The host strain has a mutation in tryptophan synthetase gene (trpB), and the mutation was determined to be a missense mutation by DNA sequence analysis. A Thermus-E. coli shuttle vector pYK109 was constructed. pYK109 consists of Thermus cryptic plasmid pTT8, tryptophan synthetase gene (trpB) of Thermus T2 and E. coli plasmid vector pUC13. pYK109 transformed T. thermophilus HB27 trpB5 to Trp+ at a frequency of 10(6) transformants per microgram DNA.     

Genetic transformation of the extreme thermophile Thermus thermophilus and of other Thermus spp.

Genetic transformation of auxotrophs of the extreme thermophile Thermus thermophilus HB27 to prototrophy was obtained at high frequencies of 10(-2) to 10(-1) when proliferating cell populations were exposed to chromosomal DNA from a nutritionally independent wild-type strain. The transformation frequency was proportional to the DNA concentration from 10 pg/ml to 100 ng/ml. T. thermophilus HB27 cells did not require chemical treatment to induce competence, although optimal transformation was obtained by the addition of a divalent cation (Ca2+ or Mg2+). Competence was maintained throughout the growth phase, with the highest transformation frequencies at pH 6 to 9 and at 70 degrees C. T. thermophilus HB27 and four other typical Thermus strains, T. thermophilus HB8, T. flavus AT62, T. caldophilus GK24, and T. aquaticus YT1, were also transformed to streptomycin resistance by DNA from their own spontaneous streptomycin-resistant mutants. A cryptic plasmid, pTT8, from T. thermophilus HB8 was introduced into T. thermophilus HB27 Pro- at a frequency of 10(-2).     

Cloning of alpha- and beta-galactosidase genes from an extreme thermophile, Thermus strain T2, and their expression in Thermus thermophilus HB27.

The genes encoding thermostable alpha- and beta-galactosidases from an extremely thermophilic bacterium, Thermus strain T2, were cloned in Escherichia coli. The alpha-galactosidase gene was located just downstream from the beta-galactosidase gene. The genes were introduced into Thermus thermophilus HB27 with the aid of Thermus cryptic plasmid pTT8, and beta-galactosidases were expressed constitutively.     

A high-transformation-efficiency cloning vector for Thermus thermophilus.

The cloning vector pMK18 was developed through the fusion of the minimal replicative region from an indigenous plasmid of Thermus sp. ATCC27737, a gene cassette encoding a thermostable resistance to kanamycin, and the replicative origin and multiple cloning site of pUC18. Plasmid pMK18 showed transformation efficiencies from 10(8) to 10(9) per microgram of plasmid in Thermus thermophilus HB8 and HB27, both by natural competence and by electroporation. We also show that T. thermophilus HB27 can take pMK18 modified by the Escherichia coli methylation system with the same efficiency as its own DNA. To demonstrate its usefulness as a cloning vector, a gene encoding the beta-subunit of a thermostable nitrate reductase was directly cloned in T. thermophilus HB27 from a gene library. Its further transfer to E. coli also proved its utility as a shuttle vector.     

Development of Thermus-Escherichia shuttle vectors and their use for expression of the Clostridium thermocellum celA gene in Thermus thermophilus.

We describe the self-selection of replication origins of undescribed cryptic plasmids from Thermus aquaticus Y-VII-51B (ATCC 25105) and a Thermus sp. strain (ATCC 27737) by random insertion of a thermostable kanamycin adenyltransferase cartridge. Once selected, these autonomous replication origins were cloned into the Escherichia coli vector pUC9 or pUC19. The bifunctional plasmids were analyzed for their sizes, relationships, and properties as shuttle vectors for Thermus-Escherichia cloning. Seven different vectors with diverse kanamycin resistance levels, stabilities, transformation efficiencies, and copy numbers were obtained. As a general rule, those from T. aquaticus (pLU1 to pLU4) were more stable than those from the Thermus sp. (pMY1 to pMY3). To probe their usefulness, we used one of the plasmids (pMY1) to clone in E. coli a modified form of the cellulase gene (celA) from Clostridium thermocellum in which the native signal peptide was replaced in vitro by that from the S-layer gene of T. thermophilus HB8. The hybrid product was expressed and exported by E. coli. When the gene was transferred by transformation into T. thermophilus, the cellulase protein was also expressed and secreted at 70 degrees C.     

Quantification of intra- and extra-cellular thermophilic lipase/esterase production by Thermus sp.

Four Thermus strains produced lipolytic activity when grown in liquid medium for 30 h at 70 degrees C. The highest total lipase/esterase activity (57 U l(-1)) was in Thermus aquaticus YT-1, followed by Thermus thermophilus HB27 and HB8 (33 and 25 U l(-1), respectively), and finally by Thermus sp. (16 U l(-1)). Extra-cellular activity was detected in T. aquaticus YT-1 and T. thermophilus HB27 (33 and 17 U l(-1)). All enzymes were stable at 80 degrees C over 30 min, and their activity towards fatty acid esters increased as substrate chain-length diminished (i.e. hydrolysis rate was up to 6-fold higher on p-nitrophenyl caproate than on laurate).     

Cloning and nucleotide sequence of the pullulanase gene of Thermus thermophilus HB8 and production of the enzyme in Escherichia coli.

A 3.4-kb SphI fragment carrying the pullulanase gene of Thermus thermophilus HB8 was cloned. Based on the nucleotide sequence of it and the flanking region analyzed by direct sequencing of the inverse PCR product, an expression vector was constructed. The E. coli cells harboring the plasmid produced an about 80-kDa protein having pullulanase activity, the optimum temperature of which was 70 degrees C.     

New host-vector system for Thermus spp. based on the malate dehydrogenase gene

A Thermus thermophilus HB27 strain was constructed in which the malate dehydrogenase (mdh) gene was deleted. The Deltamdh colonies are recognized by a small-colony phenotype. Wild-type phenotype is restored by transformation with Thermus plasmids or integration vector containing an intact mdh gene. The wild-type phenotype provides a positive selection tool for the introduction of plasmid DNA into Thermus spp., and because mdh levels can be readily quantified, this host-vector system is a convenient tool for monitoring gene expression.     

Inducible and constitutive expression using new plasmid and integrative expression vectors for Thermus sp.

AIMS: To develop molecular tools and examine inducible and constitutive gene expression in Thermus thermophilus. METHODS AND RESULTS: Two plasmid promoter probe vectors and an integrative promoter probe vector were constructed using a promoterless thermostable kanamycin nucleotidyltransferase (KmR) cassette. Three expression vectors were constructed based on a constitutive promoter J17, that functions in both Thermus and Escherichia coli. An inducible expression vector was constructed using the heat-shock inducible promoter (70 to 85 degrees C) from the dnaK gene of T. flavus, and the malate dehydrogenase gene (mdh) from T. flavus was cloned and expressed in both E. coli and T. thermophilus HB27. CONCLUSION: This report describes the construction and use of improved promoter probe and expression vectors for use in Thermus species. The mdh gene can be used as a high temperature (85 degrees C) reporter gene for Thermus sp. The dnaK promoter is thermo-inducible. Significance and Impact of the Study: The expression vectors and molecular tools described here are significant improvements over previously reported vectors for Thermus sp. The mdh gene and the thermo-inducible dnaK promoter will facilitate high temperature studies employing Thermus species.     

The genome sequence of the extreme thermophile Thermus thermophilus

Thermus thermophilus HB27 is an extremely thermophilic, halotolerant bacterium, which was originally isolated from a natural thermal environment in Japan. This organism has considerable biotechnological potential; many thermostable proteins isolated from members of the genus Thermus are indispensable in research and in industrial applications. We present here the complete genome sequence of T. thermophilus HB27, the first for the genus Thermus. The genome consists of a 1,894,877 base pair chromosome and a 232,605 base pair megaplasmid, designated pTT27. The 2,218 identified putative genes were compared to those of the closest relative sequenced so far, the mesophilic bacterium Deinococcus radiodurans. Both organisms share a similar set of proteins, although their genomes lack extensive synteny. Many new genes of potential interest for biotechnological applications were found in T. thermophilus HB27. Candidates include various proteases and key enzymes of other fundamental biological processes such as DNA replication, DNA repair and RNA maturation.     

Plasmid-associated aggregation in Thermus thermophilus HB8

Thermus thermophilus HB8, a moderate thermophile, exhibits visible aggregation when growing on a rich broth. Strain HB8 also contains two cryptic plasmids. We isolated cured strains from HB8 and observed that loss of the 47-MDa plasmid was correlated with loss of aggregation. An enrichment procedure was developed for aggregating cells and used to demonstrate that aggregation was restored upon transformation of a cured strain with plasmid DNA. The aggregation phenotype of transformed cells was variably stable; most did not retain either the plasmid or the phenotype for prolonged periods of growth. Hybridization experiments using a partial sequence from the 47-MDa plasmid suggested the presence of a repeated DNA sequence on this plasmid and on the chromosome. This is the first report of a phenotype associated with a plasmid from a Thermus strain.     

Two versatile shuttle vectors for Thermus thermophilus-Escherichia coli containing multiple cloning sites, lacZα gene and kanamycin or hygromycin resistance marker

Two versatile shuttle vectors for Thermus thermophilus and Escherichia coli were developed on the basis of the T. thermophilus cryptic plasmid pTT8 and E. coli vector pUC13. These shuttle vectors, pTRK1T and pTRH1T, carry a gene encoding a protein homologous to replication protein derived from pTT8, a replicon for E. coli, new multiple cloning sites and a lacZα gene from E. coli vector pUC13, and also have a gene encoding a thermostable protein that confers resistance to kanamycin or hygromycin, which can be used as a selection marker in T. thermophilus. These shuttle vectors are useful to develop enzymes and proteins of biotechnological interest. We also constructed a plasmid, pUC13T, which carries the same multiple cloning sites of pTRK1T and pTRH1T. These vectors should facilitate cloning procedures both in E. coli and T. thermophilus.     

Serial assembly of Thermus megaplasmid DNA in the genome of Bacillus subtilis 168: a BAC-based domino method applied to DNA with a high GC content

Bacillus subtilis is the only bacterium-based host able to clone giant DNA above 1000 kbp. DNA previously handled by this host was limited to that with GC content similar to or lower than that of the B. subtilis genome. To expand the target DNA range to higher GC content, we tried to clone a pTT27 megaplasmid (257 kbp, 69% of G+C) from Thermus thermophilus. To facilitate the reconstruction process, we subcloned pTT27 in a bacterial artificial chromosome (BAC) vector of Escherichia coli. Owing to the ability of BAC to carry around 100 kbp DNA, only 4 clones were needed to cover the pTT27 and conduct step-by-step assembly in the B. subtilis genome. The full length of 257 kbp was reconstructed through 3 intermediary lengths (108, 153, and 226 kbp), despite an unexpected difficulty in the maintenance of DNA >200 kbp. Retrieval of these four pTT27 segments from the B. subtilis genome by genetic transfer to a plasmid pLS20 was attempted. A stable plasmid clone was obtained only for the 108 and 153 kbp intermediates. The B. subtilis genome was demonstrated to accommodate large DNA with a high GC content, but may be restricted to less than 200 kbp by unidentified mechanisms.     

Horizontal transference of S-layer genes within Thermus thermophilus.

The S-layers of Thermus thermophilus HB27 and T. thermophilus HB8 are composed of protein units of 95 kDa (P95) and 100 kDa (P100), respectively. We have selected S-layer deletion mutants from both strains by complete replacement of the slpA gene. Mutants of the two strains showed similar defects in growth and morphology and overproduced an external cell envelope inside of which cells remained after division. However, the nature of this external layer is strain specific, being easily stained and regular in the HB8 delta slpA derivative and amorphous and poorly stained in the HB27 delta slpA strain. The addition of chromosomic DNA from T. thermophilus HB8 to growing cultures of T. thermophilus HB27 delta slpA led to the selection of a new strain, HB27C8, which expressed a functional S-layer composed of the P100 protein. Conversely, the addition of chromosomic DNA from T. thermophilus HB27 to growing cultures of T. thermophilus HB8 delta slpA allowed the isolation of strain HB8C27, which expressed a functional S-layer composed of the P95 protein. The driving force which selected the transference of the S-layer genes in these experiments was the difference in growth rates, one of the main factors leading to selection in natural environments.     

Curing the Megaplasmid pTT27 from Thermus thermophilus HB27 and Maintaining Exogenous Plasmids in the Plasmid-Free Strain

Stepwise deletions in the only plasmid in Thermus thermophilus HB27, megaplasmid pTT27, showed that two distantly located loci were important for maintenance of the plasmid. One is a minimum replicon including one gene, repT, coding a replication initiator, and the other encodes subunits of class I ribonucleotide reductase (RNR) for deoxynucleoside triphosphate (dNTP) synthesis. Since the initiator protein, RepT, bound to direct repeats downstream from its own gene, it was speculated that a more-downstream A+T-rich region, which was critical for replication ability, could be unwound for replication initiation. On the other hand, the class I RNR is not necessarily essential for cell growth, as evidenced by the generation of the plasmid-free strain by the loss of pTT27. However, the plasmid-free strain culture has fewer viable cells than the wild-type culture, probably due to a dNTP pool imbalance in the cell. This is because of the introduction of the class I RNR genes or the supplementation of 5′-deoxyadenosylcobalamin, which stimulated class II RNR encoded in the chromosome, resolved the decrease in the number of viable cells in the plasmid-free strain. Likewise, these treatments dramatically enhanced the efficiency of transformation by exogenous plasmids and the stability of the plasmids in the strain. Therefore, the class I RNR would enable the stable maintenance of plasmids, including pTT27, as a result of genome replication normalized by reversing the dNTP pool imbalance. The generation of this plasmid-free strain with great natural competence and its analysis in regard to exogenous plasmid maintenance will expand the availability of HB27 for thermophilic cell factories.     

Mismatch DNA recognition protein from an extremely thermophilic bacterium, Thermus thermophilus HB8.

The mutS gene, implicated in DNA mismatch repair, was cloned from an extremely thermophilic bacterium, Thermus thermophilus HB8. Its nucleotide sequence encoded a 819-amino acid protein with a molecular mass of 91.4 kDa. Its predicted amino acid sequence showed 56 and 39% homology with Escherichia coli MutS and human hMsh2 proteins, respectively. The T.thermophilus mutS gene complemented the hypermutability of the E.coli mutS mutant, suggesting that T.thermophilus MutS protein was active in E.coli and could interact with E.coli MutL and/or MutH proteins. The T.thermophilus mutS gene product was overproduced in E.coli and then purified to homogeneity. Its molecular mass was estimated to be 91 kDa by SDS-PAGE but approx. 330 kDa by size-exclusion chromatography, suggesting that T.thermophilus MutS protein was a tetramer in its native state. Circular dichroic measurements indicated that this protein had an alpha-helical content of approx. 50%, and that it was stable between pH 1.5 and 12 at 25 degree C and was stable up to 80 degree C at neutral pH. Thermus thermophilus MutS protein hydrolyzed ATP to ADP and Pi, and its activity was maximal at 80 degrees C. The kinetic parameters of the ATPase activity at 65 degrees C were Km = 130 microM and Kcat = 0.11 s(-1). Thermus thermophilus MutS protein bound specifically with G-T mismatched DNA even at 60 degrees C.     

Cloning and sequence analysis of tryptophan synthetase genes of an extreme thermophile, Thermus thermophilus HB27: plasmid transfer from replica-plated Escherichia coli recombinant colonies to competent T. thermophilus cells.

Tryptophan synthetase genes (trpBA) of the extreme thermophile Thermus thermophilus HB27 were cloned by a novel method of direct plasmid transfer from replica-plated Escherichia coli recombinant colonies to competent T. thermophilus HB27 trpB cells. The nucleotide sequences of the trpBA genes were determined. The amino acid sequences deduced from the nucleotide sequences of Thermus trpB and trpA were found to have identities of 54.8 and 28.7%, respectively, with those of E. coli trpB and trpA genes. Low cysteine content (one in trpB; zero in trpA) is a striking feature of these proteins, which may contribute to their thermostability.     

Overproduction of the Thermus thermophilus elongation factor Tu in Escherichia coli.

The elongation factor Tu (EF-Tu) encoded by the tufl gene of the extreme thermophilic bacterium Thermus thermophilus HB8 was expressed under control of the tac promoter from the recombinant plasmid pEFTu-10 in Escherichia coli. Thermophilic EF-Tu-GDP, which amounts to as much as 35% of the cellular protein content, was separated from the E coli EF-Tu-GDP by thermal denaturation at 60 degrees C. The overproduced E coli-born T thermophilus EF-Tu was characterized by: i) recognition through T thermophilus anti-EF-Tu antibodies; ii) analysis of the peptides obtained by cyanogen bromide cleavage; iii) thermostability; iv) guanine nucleotide binding activity in the absence and the presence of elongation factor Ts; and v) ternary complex formation with phenylalanyl-tRNAPhe and GTP.