Biodegradable plastic-degrading enzyme from Pseudozyma antarctica: cloning, sequencing, and characterization

Pseudozyma antarctica JCM 10317 exhibits a strong degradation activity for biodegradable plastics (BPs) such as agricultural mulch films composed of poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA). An enzyme named PaE was isolated and the gene encoding PaE was cloned from the strain by functional complementation in Saccharomyces cerevisiae. The deduced amino acid sequence of PaE contains 198 amino acids with a predicted molecular weight of 20,362.41. High identity was observed between this sequence and that of cutinase-like enzymes (CLEs) (61–68 %); therefore, the gene encoding PaE was named PaCLE1. The specific activity of PaE against emulsified PBSA was 54.8?±?6.3 U/mg. In addition to emulsified BPs, PaE degraded solid films of PBS, PBSA, poly(ε-caprolactone), and poly(lactic acid).     

Purification,characterization, and cloning of the gene for a biodegradable plastic-degrading enzyme from Paraphoma-related fungal strain B47-9

Paraphoma-related fungal strain B47-9 secreted a biodegradable plastic (BP)-degrading enzyme which amounted to 68 % (w/w) of the total secreted proteins in a culture medium containing emulsified poly(butylene succinate-co-adipate) (PBSA) as sole carbon source. The gene for this enzyme was found to be composed of an open reading frame consisting of 681 nucleotides encoding 227 amino acids and two introns. Southern blot analysis showed that this gene exists as a single copy. The deduced amino acid sequence suggested that this enzyme belongs to the cutinase (E.C.3.1.1.74) family; thus, it was named P araphoma-related fungus cutinase-like enzyme (PCLE). It degraded various types of BP films, such as poly(butylene succinate), PBSA, poly(butylene adipate-co-terephthalate), poly(ε-caprolactone), and poly(dl-lactic acid). It has a molecular mass of 19.7 kDa, and an optimum pH and temperature for degradation of emulsified PBSA of 7.2 and 45 °C, respectively. Ca²⁺ ion at a concentration of about 1.0 mM markedly enhanced the degradation of emulsified PBSA.     

Purification and characterization of a biodegradable plastic-degrading enzyme from Aspergillus oryzae

We used biodegradable plastics as fermentation substrates for the filamentous fungus Aspergillus oryzae. This fungus could grow under culture conditions that contained emulsified poly-(butylene succinate) (PBS) and emulsified poly-(butylene succinate-co-adipate) (PBSA) as the sole carbon source, and could digest PBS and PBSA, as indicated by clearing of the culture supernatant. We purified the PBS-degrading enzyme from the culture supernatant, and its molecular mass was determined as 21.6 kDa. The enzyme was identified as cutinase based on internal amino acid sequences. Specific activities against PBS, PBSA and poly-(lactic acid) (PLA) were determined as 0.42 U/mg, 11 U/mg and 0.067 U/mg, respectively. To obtain a better understanding of how the enzyme recognizes and hydrolyzes PBS/PBSA, we investigated the environment of the catalytic pocket, which is divided into carboxylic acid and alcohol recognition sites. The affinities for different substrates depended on the carbon chain length of the carboxylic acid in the substrate. Competitive inhibition modes were exhibited by carboxylic acids and alcohols that consisted of C₄-C₆ and C₃-C₈ chain lengths, respectively. Determination of the affinities for different chemicals indicated that the most preferred substrate for the enzyme would consist of butyric acid and n-hexanol.This revised version was published online in February 2005 with corrections to Table 1.     

Microbial degradation of aliphatic and aliphatic-aromatic co-polyesters

Biodegradable plastics (BPs) have attracted much attention since more than a decade because they can easily be degraded by microorganisms in the environment. The development of aliphatic-aromatic co-polyesters has combined excellent mechanical properties with biodegradability and an ideal replacement for the conventional nondegradable thermoplastics. The microorganisms degrading these polyesters are widely distributed in various environments. Although various aliphatic, aromatic, and aliphatic-aromatic co-polyester-degrading microorganisms and their enzymes have been studied and characterized, there are still many groups of microorganisms and enzymes with varying properties awaiting various applications. In this review, we have reported some new microorganisms and their enzymes which could degrade various aliphatic, aromatic, as well as aliphatic-aromatic co-polyesters like poly(butylene succinate) (PBS), poly(butylene succinate)-co-(butylene adipate) (PBSA), poly(ε-caprolactone) (PCL), poly(ethylene succinate) (PES), poly(l-lactic acid) (PLA), poly(3-hydroxybutyrate) and poly(3-hydoxybutyrate-co-3-hydroxyvalterate) (PHB/PHBV), poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), poly(butylene adipate-co-terephthalate (PBAT), poly(butylene succinate-co-terephthalate) (PBST), and poly(butylene succinate/terephthalate/isophthalate)-co-(lactate) (PBSTIL). The mechanism of degradation of aliphatic as well as aliphatic-aromatic co-polyesters has also been discussed. The degradation ability of microorganisms against various polyesters might be useful for the treatment and recycling of biodegradable wastes or bioremediation of the polyester-contaminated environments.     

Isolation and Characterization of Polyester-Based Plastics-Degrading Bacteria from Compost Soils

Four potential polyester-degrading bacterial strains were isolated from compost soils in Thailand. These bacteria exhibited strong degradation activity for polyester biodegradable plastics, such as polylactic acid (PLA), polycaprolactone (PCL), poly-(butylene succinate) (PBS) and polybutylene succinate-co-adipate (PBSA) as substrates. The strains, classified according to phenotypic characteristics and 16S rDNA sequence, belonging to the genera Actinomadura, Streptomyces and Laceyella, demonstrated the best polyester- degrading activities. All strains utilized polyesters as a carbon source, and yeast extract with ammonium sulphate was utilized as a nitrogen source for enzyme production. Optimization for polyester-degrading enzyme production by Actinomadura sp. S14, Actinomadura sp. TF1, Streptomyces sp. APL3 and Laceyella sp. TP4 revealed the highest polyester-degrading activity in culture broth when 1% (w/v) PCL (18 U/mL), 0.5% (w/v) PLA (22.3 U/mL), 1% (w/v) PBS (19.4 U/mL) and 0.5% (w/v) PBSA (6.3 U/mL) were used as carbon sources, respectively. All strains exhibited the highest depolymerase activities between pH 6.0–8.0 and temperature 40–60°C. Partial nucleotides of the polyester depolymerase gene from strain S14, TF1 and APL3 were studied. We determined the amino acids making up the depolymerase enzymes had a highly conserved pentapeptide catalytic triad (Gly-His-Ser-Met-Gly), which has been shown to be part of the esterase-lipase superfamily (serine hydrolase).     

Degradation of aliphatic polyester films by commercially available lipases with special reference to rapid and complete degradation of poly(L-lactide) film by lipase PL derived from Alcaligenes sp

Commercial lipases were examined for their degradation efficiency of aliphatic polyester films. In 100 days immersion of polyester films in lipase solutions at37 °C at pH 7.0,Lipase Asahi derived from Chromobacterium viscosum degraded polybutylene succinate-co-adipate (PBSA), poly (-caprolactone) (PCL) and polybutylene succinate (PBS), and Lipase F derived from Rhizopus niveus degraded PBSA and PCL during 4–17 days. Lipase F-AP15 derived fromRhizopus orizae could degrade PBSA in 22 days. In these cases, PBS and PBSA were mainly degraded to dimers, whereas PCL was mainly degraded to monomers. Only poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(PHB/V) and poly (L-lactide) (PLA) were not degraded in the experiments. However, PLA degraded completely at 55 °C, pH 8.5 with Lipase PL during 20 days. This result could be explained with the sequential reactions of the chemical hydrolysis of the polymer to oligomers at higher pH and temperature, and the succeeding enzymatic hydrolysis of oligomers to the monomers.     

A low molecular mass cutinase of Thielavia terrestris efficiently hydrolyzes poly(esters)

A low molecular mass cutinase (designated TtcutA) from Thielavia terrestris was purified and biochemically characterized. The thermophilic fungus T. terrestris CAU709 secreted a highly active cutinase (90.4 U ml^?1) in fermentation broth containing wheat bran as the carbon source. The cutinase was purified 19-fold with a recovery yield of 4.8 %. The molecular mass of the purified TtcutA was determined as 25.3 and 22.8 kDa using SDS-PAGE and gel filtration, respectively. TtcutA displayed optimal activity at pH 4.0 and 50 °C. It was highly stable up to 65 °C and in the broad pH range 2.5–10.5. Extreme stability in high concentrations (80 %, v/v) of solvents such as methanol, ethanol, acetone, acetonitrile, isopropanol, and dimethyl sulfoxide was observed for the enzyme. The K _m values for this enzyme towards p-nitrophenyl (pNP) acetate, pNP butyrate, and pNP caproate were 7.7, 1.0, and 0.52 mM, respectively. TtcutA was able to efficiently degrade various ester polymers, including cutin, polyethylene terephthalate (PET), polycaprolactone (PCL), and poly(butylene succinate) (PBS) at hydrolytic rates of 3 μmol h^?1 mg^?1 protein, 1.1 mg h^?1 mg^?1 protein, 203.6 mg h^?1 mg^?1 protein, and 56.4 mg h^?1 mg^?1 protein, respectively. Because of these unique biochemical properties, TtcutA of T. terrestris may be useful in various industrial applications in the future.     

Isolation and characterization of a bacterium that degrades various polyester-based biodegradable plastics

Microorganisms isolated from soil samples were screened for their ability to degrade various biodegradable polyester-based plastics. The most active strain, designated as strain TB-13, was selected as the best strain for degrading these plastics. From its phenotypic and genetic characteristics, strain TB-13 was closely related to Paenibacillus amylolyticus. It could degrade poly(lactic acid), poly(butylene succinate), poly(butylene succinate-co-adipate), poly(caprolactone) and poly(ethylene succinate) but not poly(hydroxybutylate-co-valerate). However, it could not utilize these plastics as sole carbon sources. Both protease and esterase activities, which may be involved in the degradation of plastic, were constitutively detected in the culture broth.     

Properties of a bacterium which degrades solid poly(tetramethylene succinate)-co-adipate, a biodegradable plastic

Various microorganisms were screened for their ability to degrade poly(tetramethylene succinate)-co-(tetramethylene adipate) (PBSA). Strain BS-3, which was newly isolated from a soil sample, was selected as the best strain. From taxonomical studies, the strain was tentatively ascribed to belong to the genus Acidovorax, most probably to the species A. delafieldii. Strain BS-3 could degrade both solid and emulsified PBSA, and also emulsified poly(tetramethylene succinate). During the degradation, a lipase activity was observed in the culture broth. This lipase activity was induced more strongly by PBSA than by tributyrin or triolein which are typical substrates of lipase. These observations strongly suggest that this lipase was involved in the PBSA biodegradation in strain BS-3.     

Biochemical characterization of VQ-VII, a cysteine peptidase with broad specificity, isolated from Vasconcellea quercifolia latex

The latex from Vasconcellea quercifolia (“oak leaved papaya”), a member of the Caricaceae family, contains at least seven cysteine endopeptidases with high proteolytic activity, which helps to protect these plants against injury. In this study, we isolated and characterized the most basic of these cysteine endopeptidases, named VQ-VII. This new purified enzyme was homogeneous by bidimensional electrophoresis and MALDI-TOF mass spectrometry, and exhibited a molecular mass of 23,984 Da and an isoelectric point >11. The enzymatic activity of VQ-VII was completely inhibited by E-64 and iodoacetic acid, confirming that it belongs to the catalytic group of cysteine endopeptidases. By investigating the cleavage of the oxidized insulin B-chain to establish the hydrolytic specificity of VQ-VII, we found 13 cleavage sites on the substrate, revealing that it is a broad-specificity peptidase. The pH profiles toward p-Glu-Phe-Leu-p-nitroanilide (PFLNA) and casein showed that the optimum pH is about 6.8 for both substrates, and that in casein, it is active over a wide pH range (activity higher than 80 % between pH 6 and 9.5). Kinetic enzymatic assays were performed with the thiol peptidase substrate PFLNA (K _m = 0.454 ± 0.046 mM, k _cat = 1.57 ± 0.07 s^?1, k _cat/K _m = 3.46 × 10³ ± 14 s^?1 M^?1). The N-terminal sequence (21 amino acids) of VQ-VII showed an identity >70 % with 11 plant cysteine peptidases and the presence of highly conserved residues and motifs shared with the “papain-like” family of peptidases. VQ-VII proved to be a new latex enzyme of broad specificity, which can degrade extensively proteins of different nature in a wide pH range.     

Production of a novel compound, 10,12-dihydroxystearic acid from ricinoleic acid by an oleate hydratase from Lysinibacillus fusiformis

A recombinant oleate hydratase from Lysinibacillus fusiformis converted ricinoleic acid to a product, whose chemical structure was identified as the novel compound 10,12-dihydroxystearic acid by gas chromatograph/mass spectrometry, Fourier transform infrared, and nuclear magnetic resonance analysis. The reaction conditions for the production of 10,12-dihydroxystearic acid were optimized as follows: pH?6.5, 30 °C, 15 g?l^?1 ricinoleic acid, 9 mg?ml^?1 of enzyme, and 4 % (v/v) methanol. Under the optimized conditions, the enzyme produced 13.5 g?l^?1 10,12-dihydroxystearic acid without detectable byproducts in 3 h, with a conversion of substrate to product of 90 % (w/w) and a productivity of 4.5 g?l^?1?h^?1. The emulsifying activity of 10,12-dihydroxystearic acid was higher than that of oleic acid, ricinoleic acid, stearic acid, and 10-hydroxystearic acid, indicating that 10,12-dihydroxystearic acid can be used as a biosurfactant.     

Purification and characterization of a novel poly(butylene succinate)-degrading enzyme from <Emphasis Type="Italic">Aspergillus</Emphasis> sp. XH0501-a

A poly(butylene succinate) (PBS)-degrading Aspergillus sp. XH0501-a was obtained by ultraviolet light compound LiCl mutagenesis from the Aspergillus sp. XH0501 which was isolated from soil. The enzymatic activity of strain XH0501-a was 38.89% higher than that of the wild-type strain. A novel extracellular PBS-degrading enzyme with a molecular weight of 44.7 kDa was purified to homogeneity from the culture supernatant of XH0501-a strain. The optimum temperature and pH for the enzyme activity was 40°C and pH 8.6, respectively. It was found that Fe²⁺ and Ca²⁺ enhanced the enzyme activity, whereas Cu²⁺ and Hg²⁺ inhibited it. The primary products after enzymatic degradation were identified by mass spectrometric analysis and the results indicated that the enzyme was of the exo-type and cut the chain from the carboxyl end; the affinity for the substrate was relative to the chain length of the carboxylic ester.     

Hydrolysis of polyesters by serine proteases

The substrate specificity of -chymotrypsin and other serine proteases, trypsin, elastase, proteinase K and subtilisin, towards hydrolysis of various polyesters was examined using poly(L-lactide) (PLA), poly(-hydroxybutyrate) (PHB), poly(ethylene succinate) (PES), poly(ethylene adipate) (PEA), poly(butylene succinate) (PBS), poly(butylene succinate-co-adipate) (PBS/A), poly[oligo(tetramethylene succinate)-co-(tetramethylane carbonate)] (PBS/C), and poly(-caprolactone) (PCL). -Chymotrypsin could degrade PLA and PEA with a lower activity on PBS/A. Proteinase K and subtilisin degraded almost all substrates other than PHB. Trypsin and elastase had similar substrate specificities to -chymotrypsin.     

Enzymatic degradation of polyester films by a cutinase-like enzyme from Pseudozyma antarctica: surface plasmon resonance and atomic force microscopy study

Enzymatic degradation of polyester films by a cutinase-like enzyme from Pseudozyma antarctica JCM10317 (PaE) was analyzed by surface plasmon resonance (SPR). The adsorption of PaE and the degradation rate for polyester films were quantitatively monitored by a positive and negative SPR signal shifts, respectively. The decrease in SPR signal and the erosion depth of amorphous poly(l-lactide) (a-PLLA) film measured by atomic force microscopy (AFM) had a linear relationship, and the weight loss was estimated from the AFM data combined with a density of a-PLLA film. Furthermore, SPR sensorgrams for various polyester films showed that degradation rate of poly(ε-caprolactone) and poly(butylene succinate-co-adipate) which contain C6 units was higher than that of other polyesters such as poly(butylene succinate) and a-PLLA. These results suggest that C6 is the preferred chain length as substrates for PaE.     

Production and characterization of a solvent-tolerant protease from a novel marine isolate Bacillus tequilensis P15

Thirty-six proteolytic bacteria were isolated from the Jakhau coast, Kutch, India, amongst which isolate P15 identified as Bacillus tequilensis (JQ904626) was found to produce an extracellular solvent-- and detergent-tolerant protease (116.69?±?0.48 U/ml) and was selected for further investigation. Deoiled Jatropha seedcake (JSC) was found to be a suitable substrate for protease production under submerged condition. Upon optimization of process parameters following one-factor-at-a-time approach, an overall 6.4-fold (860.27?±?18.48 U/ml) increase in protease production was achieved. The maximum protease yield was obtained using a medium containing 2 % (w/v) deoiled JSC as substrate (pH of 8.0) upon 36 h of fermentation at 30 °C. The optimum temperature and pH for activity of B. tequilensis P15 protease was found to be 50 °C and 8.0, respectively. The enzyme exhibited a half-life of 190 min at 50 °C, which was enhanced to 270 min in presence of 5 mM Ca²⁺. The enzyme exhibited significant stability in almost all the solvents tested in the range of log P _ow varying from 8.8 to ?0.76. The enzyme activity was strongly inhibited by PMSF at 5 mM concentration, whereas the presence of EDTA (5 mM) and pCMB (5 mM) enhanced enzyme activity by 20.9 and 13.7 %, respectively. The enzyme was also found to be stable in the presence of surfactants, commercial detergents and bleach-oxidant (H₂O₂). This protease was demonstrated to be effective in removal of blood stains from fabrics, dehairing of hide, and stripping off the gelatin from used photographic films.     

A lesson from polybutylene succinate plastisphere to the discovery of novel plastic degrading enzyme genes in marine vibrios

Polybutylene succinate (PBS) is an eco-friendly green plastic. However, PBS was shown as being non-biodegradable in marine environments, and up until now, only a limited number of PBS-degrading marine microbes have been discovered. We first set up in vitro PBS- and PBSA (polybutylene succinate adipate)-plastispheres to characterize novel PBS-degrading marine microbes. Microbial growth and oxygen consumption were observed in both PBS- and PBSA-plastispheres enriched with natural seawater collected from Usujiri, Hokkaido, Japan, and Vibrionaceae and Pseudoalteromonadaceae were significantly enriched on these films. Further gene identification indicated that vibrios belonging to the Gazogenes clade possess genes related to a PBS degrading enzyme (PBSase). The PBS degradation assay for six Gazogenes clade vibrios identified Vibrio ruber, Vibrio rhizosphaerae, and Vibrio spartinae as being capable of degrading PBS. We further identified the gene responsible for PBSase from the type strain of V. ruber, and the purified recombinant vibrio PBSase was found to have low-temperature adaptation and was active under high NaCl concentrations. We also provided docking models between the vibrio PBSase and PBS and PBSA units to show how vibrio PBSase interacts with each substrate compared to the Acidovorax PBSase. These results could contribute to a more sustainable society through further utilization of PBS in marine environments and plastic recycling.     

Purification and characterization of a cis-epoxysuccinic acid hydrolase from Nocardia tartaricans CAS-52, and expression in Escherichia coli

A highly enantioselective cis-epoxysuccinic acid hydrolase from Nocardia tartaricans was purified to electrophoretic homogeneity. The enzyme was purified 184-fold with a yield of 18.8 %. The purified cis-epoxysuccinic acid hydrolase had a monomeric molecular weight of 28 kDa, and its optimum conditions were 37 °C and pH 7–9. With sodium cis-epoxysuccinate as the substrate, Michaelis–Menten enzyme kinetics analysis gave a Km value of 35.71 mM and a Vmax of 2.65 mM min^?1. The enzyme was activated by Ni²⁺ and Al³⁺, while strongly inhibited by Fe³⁺, Fe²⁺, Cu²⁺, and Ag⁺. The cis-epoxysuccinic acid hydrolase gene was cloned, and its open reading frame sequence predicted a protein composed of 253 amino acids. A pET11a expression plasmid carrying the gene under the control of the T7 promoter was introduced into Escherichia coli, and the cis-epoxysuccinic acid hydrolase gene was successfully expressed in the recombinant strains.     

Cutinase-Like Enzyme from the Yeast Cryptococcus sp. Strain S-2 Hydrolyzes Polylactic Acid and Other Biodegradable Plastics

A purified lipase from the yeast Cryptococcus sp. strain S-2 exhibited remote homology to proteins belonging to the cutinase family rather than to lipases. This enzyme could effectively degrade the high-molecular-weight compound polylactic acid, as well as other biodegradable plastics, including polybutylene succinate, poly (-caprolactone), and poly(3-hydroxybutyrate).     

Promising properties of a formate dehydrogenase from a methanol-assimilating yeast Ogataea parapolymorpha DL-1 in His-tagged form

The cDNA gene coding for formate dehydrogenase (FDH) from Ogataea parapolymorpha DL-1 was cloned and expressed in Escherichia coli. The recombinant enzyme was purified by nickel affinity chromatography and was characterized as a homodimer composed of two identical subunits with approximately 40 kDa in each monomer. The enzyme showed wide pH optimum of catalytic activity from pH 6.0 to 7.0. It had relatively high optimum temperature at 65 °C and retained 93, 88, 83, and 71 % of its initial activity after 4 h of exposure at 40, 50, 55, and 60 °C, respectively, suggesting that this enzyme had promising thermal stability. In addition, the enzyme was characterized to have significant tolerance ability to organic solvents such as dimethyl sulfoxide, n-butanol, and n-hexane. The Michaelis–Menten constant (K _m), turnover number (k _cat), and catalytic efficiency (k _cat/K _m) values of the enzyme for the substrate sodium formate were estimated to be 0.82 mM, 2.32 s^?1, and 2.83 mM^?1 s^?1, respectively. The K _m for NAD⁺ was 83 μM. Due to its wide pH optimum, promising thermostability, and high organic solvent tolerance, O. parapolymorpha FDH may be a good NADH regeneration catalyst candidate.     

Functional properties of a manganese-activated exo-polygalacturonase produced by a thermotolerant fungus Aspergillus niveus

A thermotolerant fungus identified as Aspergillus niveus was isolated from decomposing materials and it has produced excellent levels of hydrolytic enzymes that degrade plant cell walls. A. niveus germinated faster at 40 °C, presenting protein levels almost twofold higher than at 25 °C. The crude extract of the A. niveus culture was purified by diethylaminoethyl (DEAE)-cellulose, followed by Biogel P-100 column. Polygalacturonase (PG) is a glycoprotein with 37.7 % carbohydrate, molecular mass of 102.6 kDa, and isoelectric point of 5.4. The optimum temperature and pH were 50 °C and 4.0–6.5, respectively. The enzyme was stable at pH 3.0 to 9.0 for 24 h. The DEAE-cellulose derivative was about sixfold more stable at 60 °C than the free enzyme. Moreover, the monoaminoethyl-N-aminoethyl-agarose derivative was tenfold more stable than the free enzyme. PG was 232 % activated by Mn²⁺. The hydrolysis product of sodium polypectate corresponded at monogalacturonic acid, which classifies the enzyme as an exo-PG. The K _m, V _max, K _cat, and K _cat/K _m values were 6.7 mg/ml, 230 U/mg, 393.3/s, and 58.7 mg/ml/s, respectively. The N-terminal amino acid sequence presented 80 % identity with PglB1, PglA2, and PglA3 putative exo-PG of Aspergillus fumigatus and an exo-PG Neosartorya fischeri.