A novel post‐ligation thioesterification device enables peptide ligation in the N to C direction: synthetic study of human glycodelin

Human glycodelin consists of 162 amino acid residues and two N‐linked glycans at Asn²⁸ and Asn⁶³. In this study, we synthesized it by a fully convergent strategy using native chemical ligation (NCL) in N to C direction. The four peptide segments corresponding to 1–31, 32–65, 66–105 and 106–162 sequences were synthesized by 9‐fluorenylmethoxycarbonyl based solid‐phase peptide synthesis. At the C‐terminus of the second segment, N‐ethyl‐S‐acetamidomethyl‐cysteine was attached as a post‐ligation thioesterification device. The N‐terminal two segments were condensed by the homocysteine‐mediated NCL at Leu‐Met site, and the product was methylated to convert homocysteine to methionine. After deprotection of acetamidomethyl group on the N‐ethylcysteine residue, the peptide was thioesterified by N‐alkylcysteine‐assisted method. The product was then ligated with the C‐terminal half, which was obtained by the NCL of third and fourth segments, to give the full‐length glycodelin. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of an O‐acyl isopeptide by using native chemical ligation in an aqueous solvent system

O‐Acyl isopeptides, in which the N‐acyl linkage on the hydroxyamino acid residue (e.g. Ser and Thr) is replaced by an O‐acyl linkage, generally suppress unfavorable aggregation properties derived from the corresponding parent peptides. Here, we report the synthesis of an O‐acyl isopeptide of 34‐mer pyroGlu‐ADan (2), a component of amyloid deposits in hereditary familial Danish dementia, by using native chemical ligation. Native chemical ligation of pyroGlu¹‐ADan(1‐21)‐SCH₂CH₂SO₃^?Na⁺ (3) and Cys²²‐O‐acyl isopeptide (4), in which the amino group of the Ser²⁹ residue at the isopeptide moiety was protected by an allyloxycarbonyl group, proceeded well in an aqueous solvent to yield a ligated O‐acyl isopeptide (5). Subsequent disulfide bond formation and deprotection of the allyloxycarbonyl group followed by HPLC purification gave 2 with a reasonable overall yield. 2 was converted to the parent peptide 1 via an O‐to‐N acyl migration reaction. The sequential method, namely (i) native chemical ligation of the O‐acyl isopeptide, (ii) HPLC purification as the O‐acyl isopeptide form, and (iii) O‐to‐N acyl migration into the desired polypeptide, would be helpful to solve problems with HPLC purification of hydrophobic polypeptides in the process of chemical protein synthesis. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Investigation of peptide thioester formation via N→Se acyl transfer

Native chemical ligation is widely used for the convergent synthesis of proteins. The peptide thioesters required for this process can be challenging to produce, particularly when using Fmoc‐based solid‐phase peptide synthesis. We have previously reported a route to peptide thioesters, following Fmoc solid‐phase peptide synthesis, via an N→S acyl shift that is initiated by the presence of a C‐terminal cysteine residue, under mildly acidic conditions. Under typical reaction conditions, we occasionally observed significant thioester hydrolysis as a consequence of long reaction times (~48 h) and sought to accelerate the reaction. Here, we present a faster route to peptide thioesters, by replacing the C‐terminal cysteine residue with selenocysteine and initiating thioester formation via an N→Se acyl shift. This modification allows thioester formation to take place at lower temperatures and on shorter time scales. We also demonstrate how application of this strategy also accelerates peptide cyclization, when a linear precursor is furnished with an N‐terminal cysteine and C‐terminal selenocysteine. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Semi‐synthesis of murine prion protein by native chemical ligation and chemical activation for preparation of polypeptide‐α‐thioester

Prions are suspected as pathogen of the fatal transmissible spongiform encephalopathies. Strategies to access homogenous prion protein (PrP) are required to fully comprehend the molecular mechanism of prion diseases. However, the polypeptide fragments from PrP show a high tendency to form aggregates, which is a gigantic obstacle of protein synthesis and purification. In this study, murine prion sequence 90 to 230 that is the core three‐dimensional structure domain was constructed from three segments murine PrP (mPrP)(90–177), mPrP(178–212), and mPrP(213–230) by combining protein expression, chemical synthesis and chemical ligation. The protein sequence 90 to 177 was obtained from expression and finally converted into the polypeptide hydrazide by chemical activation of a cysteine in the tail. The other two polypeptide fragments of the C‐terminal were obtained by chemical synthesis, which utilized the strategies of isopeptide and pseudoproline building blocks to complete the synthesis of such difficult sequences. The three segments were finally assembled by sequentially using native chemical ligation. This strategy will allow more straightforward access to homogeneously modified PrP variants. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.     

Thiocarbamate‐linked peptides by chemoselective peptide ligation

Peptide chemical ligation chemistries, which allow the chemoselective coupling of unprotected peptide fragments, are useful tools for synthesizing native polypeptides or unnatural peptide‐based macromolecules. We show here that the phenylthiocarbonyl group can be easily introduced into peptides on α or ε amino groups using phenylthiochloroformate and standard solid‐phase method. It reacts chemoselectively with cysteinyl peptides to give an alkylthiocarbamate bond. S,N‐shift of the alkylaminocarbonyl group from the Cys side chain to the α‐amino group did not occur. The method was used for linking two peptide chains through their N‐termini, for the synthesis of a cyclic peptide or for the synthesis of di‐ or tetravalent multiple antigenic peptides (MAPs). Thiocarbamate ligation is thus complementary to thioether, thioester or disulfide ligation methods. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Chemical ligation of the influenza M2 protein for solid‐state NMR characterization of the cytoplasmic domain

Solid‐state NMR‐based structure determination of membrane proteins and large protein complexes faces the challenge of limited spectral resolution when the proteins are uniformly ¹³C‐labeled. A strategy to meet this challenge is chemical ligation combined with site‐specific or segmental labeling. While chemical ligation has been adopted in NMR studies of water‐soluble proteins, it has not been demonstrated for membrane proteins. Here we show chemical ligation of the influenza M2 protein, which contains a transmembrane (TM) domain and two extra‐membrane domains. The cytoplasmic domain, which contains an amphipathic helix (AH) and a cytoplasmic tail, is important for regulating virus assembly, virus budding, and the proton channel activity. A recent study of uniformly ¹³C‐labeled full‐length M2 by spectral simulation suggested that the cytoplasmic tail is unstructured. To further test this hypothesis, we conducted native chemical ligation of the TM segment and part of the cytoplasmic domain. Solid‐phase peptide synthesis of the two segments allowed several residues to be labeled in each segment. The post‐AH cytoplasmic residues exhibit random‐coil chemical shifts, low bond order parameters, and a surface‐bound location, thus indicating that this domain is a dynamic random coil on the membrane surface. Interestingly, the protein spectra are similar between a model membrane and a virus‐mimetic membrane, indicating that the structure and dynamics of the post‐AH segment is insensitive to the lipid composition. This chemical ligation approach is generally applicable to medium‐sized membrane proteins to provide site‐specific structural constraints, which complement the information obtained from uniformly ¹³C, ¹⁵N‐labeled proteins.     

Through the looking glass – a new world of proteins enabled by chemical synthesis

‘Chemical ligation’ – the regioselective and chemoselective covalent condensation of unprotected peptide segments – has enabled the synthesis of polypeptide chains of more than 200 amino acids. An efficient total chemical synthesis of the insulin molecule has been devised on the basis of a key ester‐linked intermediate that is chemically converted to fully active human insulin. Enzyme molecules of defined covalent structure and with full enzymatic activity have been prepared and characterized by high‐resolution X‐ray crystallography. A ‘glycoprotein mimetic’ of defined chemical structure and with a mass of 50,825 Da, has been prepared and shown to have full biological activity and improved pharmacokinetic properties. d ‐Protein molecules that are the mirror images of proteins found in the natural world have been prepared by total chemical synthesis. Racemic protein mixtures, consisting of the d ‐enantiomers and l ‐enantiomers of a protein molecule, form highly ordered centrosymmetric crystals with great ease; this has enabled the determination of the crystal structures of recalcitrant protein molecules. A protein with a novel linear‐loop covalent topology of the peptide chain has been designed and synthesized and its structure determined by facile crystallization as the quasi‐racemate with the d ‐form of the native protein molecule. We have developed an optimized total chemical synthesis of biologically active vascular endothelial growth factor‐A; total synthesis of the mirror‐image protein will be used to systematically develop d ‐protein antagonists of this important growth factor. The total chemical synthesis of proteins is now a practical reality and enables access to a new world of protein molecules. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Epimerization‐free synthesis of cyclic peptide by use of the O‐acyl isopeptide method

A head‐to‐tail cyclization of a protected linear hexapeptide with a C‐terminal O‐acyl isopeptide proceeded to give a cyclic O‐acyl isopeptide without epimerization. The cyclic O‐acyl isopeptide possessed different secondary structures compared with the native cyclic peptide. The isopeptide was then efficiently converted to the desired cyclic peptide via an O‐to‐N acyl migration reaction using a silica gel‐anchored base. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of lucifensin by native chemical ligation and characteristics of its isomer having different disulfide bridge pattern

The antimicrobial 40‐amino‐acid‐peptide lucifensin was synthesized by native chemical ligation (NCL) using N‐acylbenzimidazolinone (Nbz) as a linker group. NCL is a method in which a peptide bond between two discreet peptide chains is created. This method has been applied to the synthesis of long peptides and proteins when solid‐phase synthesis is imcompatible. Two models of ligation were developed: [15 + 25] Ala‐Cys and [19 + 21] His‐Cys. The [19 + 21] His‐Cys method gives lower yield because of the lower stability of 18‐peptide‐His‐Nbz‐CONH₂ peptide, as suggested by density functional theory calculation. Acetamidomethyl‐deprotection and subsequent oxidation of the ligated linear lucifensin gave a mixture of lucifensin isomers, which differed in the location of their disulfide bridges only. The dominant isomer showed unnatural pairing of cysteines [C1?6], [C3?5], and [C2?4], which limits its ability to form α‐helical structure. The activity of isomeric lucifensin toward Bacillus subtilis, Staphylococcus aureus, and Micrococcus luteus was lower than that of the natural lucifensin. The desired product native lucifensin was prepared from this isomer using a one‐pot reduction with dithiotreitol and subsequent air oxidation in slightly alkaline medium. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Isopeptide method: development of S‐acyl isopeptide method for the synthesis of difficult sequence‐containing peptides

A novel strategy for a more efficient synthesis of difficult sequence‐containing peptides, the S‐acyl isopeptide method, was developed and successfully applied. A model pentapeptide Ac–Val–Val–Cys–Val–Val–NH₂ was synthesized via its water‐soluble S‐acyl isopeptide using an S‐acyl isodipeptide unit, Boc–Cys(Fmoc–Val)–OH. An S‐acyl isopeptide possessing excellent water solubility could be readily and quantitatively converted to the native peptide via an S N intramolecular acyl migration reaction at pH 7.4. Thus, the S‐acyl isopeptide method provides a useful tool in peptide chemistry. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Considerations for the process development of insect‐derived antimicrobial peptide production

Antimicrobial peptides (AMPs) could evolve into new therapeutic lead molecules against multi‐resistant bacteria. As insects are a rich source of AMP, the identification and characterization of insect‐derived AMPs is particularly emphasized. One challenge of bringing these molecules into market, e.g., as a drug, is to develop a cost‐efficient large‐scale production process. Due to the fact that a direct AMP isolation from insects is not economical and that chemical synthesis is recommended for peptide sizes below 40 amino acids, a viable option is heterologous AMP production. Therefore, previous knowledge concerning the expression of larger proteins can be adapted, but due to the AMP nature (e.g., small size, bactericide) additional challenges have to be faced during up and downstream processing. Nonetheless the bottleneck for large‐scale AMP production is the same as for proteins; mainly the downstream process. This review introduces opportunities for insect‐derived AMP production, like the choice of the expression system (based on previously derived data), depending on the AMP nature, as well as new purification strategies like elastin‐like peptide/intein based purification strategies. All of these aspects are discussed with regard to large‐scale processes and costs. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 31:1–11, 2015     

Influenza A virus protein PB1-F2: synthesis and characterization of the biologically active full length protein and related peptides.

Recently the discovery of a novel 87 amino acid influenza A virus (IAV) protein, named PB1-F2, has been reported that originates from an alternative reading frame in the PB1 polymerase gene and is encoded in most of the known human IAV isolates. Using optimized protocols, full length biologically active sPB1-F2 and a number of fragments have been synthesized by following either the standard elongation SPPS method or by native chemical ligation of unprotected N- and C-terminal peptide fragments at the histidine and cysteine residues located in position 41 and 42 of the native sequence, respectively. The ligation procedure afforded the most efficient synthesis of sPB1-F2 and facilitated the generation of various mutants of sPB1-F2 from pre-synthesized peptide fragments. During the synthesis of sPB1-F2, the formation of succinimide and subsequent conversion to the piperidine derivative at the aspartic acid residue in position 23 was observed. This reaction was forestalled by applying specific modifications to the SPPS protocol. The chain-elongation SPPS protocol is optimal for producing small peptides of sPB1-F2, their derivatives and precursors for a subsequent ligation protocol, while the full length protein, mutants and labelled derivatives are more conveniently and efficiently synthesized by SPPS protocols that include native chemical ligation. The molecular identity of sPB1-F2 was confirmed by peptide mapping, mass spectrometry, N-terminal sequencing, (1)H NMR spectroscopy and Western blot analysis. The latter analysis afforded direct evidence of the inherent tendency of sPB1-F2 to undergo oligomerization, a phenomenon observed both for full length sPB1-F2 and fragments thereof, as well as for its full length viral counterpart. Our synthesis protocols open the field for multiple biological and structural studies on sPB1-F2 that, similar to the molecule expressed in an IAV context, induces apoptosis and interacts with membranes in vitro and in vivo, as shown in previous studies.     

Making Ends Meet: Microwave-Accelerated Synthesis of Cyclic and Disulfide Rich Proteins Via In Situ Thioesterification and Native Chemical Ligation

The development of synthetic methodologies for cyclic peptides is driven by the discovery of cyclic peptide drug scaffolds such as the plant-derived cyclotides, sunflower trypsin inhibitor 1 (SFTI-1) and the development of cyclized conotoxins. Currently, the native chemical ligation reaction between an N-terminal cysteine and C-terminal thioester group remains the most robust method to obtain a head-to-tail cyclized peptide. Peptidyl thioesters are effectively generated by Boc SPPS. However, their generation is challenging using Fmoc SPPS because thioester linkers are not stable to repeated piperidine exposure during deprotection. Herein we describe a Fmoc-based protocol for synthesizing cyclic peptides adapted for microwave assisted solid phase peptide synthesis. The protocol relies on the linker Di-Fmoc-3,4-diaminobenzoic acid, and we demonstrate the use of Gly, Ser, Arg and Ile as C-terminal amino acids (using HBTU and HATU as coupling reagents). Following synthesis, an N-acylurea moiety is generated at the C-terminal of the peptide; the resin bound acylurea peptide is then deprotected and cleaved from the resin. The fully deprotected peptide undergoes thiolysis in aqueous buffer, generating the thioester in situ. Ultimately, the head-to-tail cyclized peptide is obtained via native chemical ligation. Two naturally occurring cyclic peptides, the prototypical Möbius cyclotide kalata B1 and SFTI-1 were synthesized efficiently, avoiding potential branching at the diamino linker, using the optimized protocol. In addition, we demonstrate the possibility to use the approach for the synthesis of long and synthetically challenging linear sequences, by the ligation of two truncated fragments of a 50-residue long plant defensin.     

Incorporation of N‐amidino‐pyroglutamic acid into peptides using intramolecular cyclization of α‐guanidinoglutaric acid

N‐terminal modification of peptides by unnatural amino acids significantly affects their enzymatic stability, conformational properties and biological activity. Application of N‐amidino‐amino acids, positively charged under physiological conditions, can change peptide conformation and its affinity to the corresponding receptor. In this article, we describe synthesis of short peptides, containing a new building block—N‐amidino‐pyroglutamic acid. Although direct guanidinylation of pyroglutamic acid and oxidation of N‐amidino‐proline using RuO₄ did not produce positive results, N‐amidino‐Glp‐Phe‐OH was synthesized on Wang polymer by cyclization of α‐guanidinoglutaric acid residue. In the course of synthesis, it was found that literature procedure of selective Boc deprotection using TMSOTf/TEA reagent is accompanied by concomitant side reaction of triethylamine alkylation by polymer linker fragment. It should be mentioned that independently from cyclization time and coupling agent (DIC or HCTU), the lactam formation was incomplete. Separation of the cyclic product from the linear precursor was achieved by HPLC in ammonium formate buffer at pH 6. HPLC analysis showed N‐amidino‐Glp‐Phe‐OH stability at acidic and physiological pH and fast ring opening in water solution at pH 9. The suggested method of N‐amidino‐Glp residue formation can be applied in the case of short peptide chains, whereas synthesis of longer ones will require fragment condensation approach. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

mRNA display selection and solid‐phase synthesis of Fc‐binding cyclic peptide affinity ligands

Cyclic peptides are attractive candidates for synthetic affinity ligands due to their favorable properties, such as resistance to proteolysis, and higher affinity and specificity relative to linear peptides. Here we describe the discovery, synthesis and characterization of novel cyclic peptide affinity ligands that bind the Fc portion of human Immunoglobulin G (IgG; hFc). We generated an mRNA display library of cyclic pentapeptides wherein peptide cyclization was achieved with high yield and selectivity, using a solid‐phase crosslinking reaction between two primary amine groups, mediated by a homobifunctional linker. Subsequently, a pool of cyclic peptide binders to hFc was isolated from this library and chromatographic resins incorporating the selected cyclic peptides were prepared by on‐resin solid‐phase peptide synthesis and cyclization. Significantly, this approach results in resins that are resistant to harsh basic conditions of column cleaning and regeneration. Further studies identified a specific cyclic peptide—cyclo[Link‐M‐WFRHY‐K]—as a robust affinity ligand for purification of IgG from complex mixtures. The cyclo[Link‐M‐WFRHY‐K] resin bound selectively to the Fc fragment of IgG, with no binding to the Fab fragment, and also bound immunoglobulins from a variety of mammalian species. Notably, while the recovery of IgG using the cyclo[Link‐M‐WFRHY‐K] resin was comparable to a Protein A resin, elution of IgG could be achieved under milder conditions (pH 4 vs. pH 2.5). Thus, cyclo[Link‐M‐WFRHY‐K] is an attractive candidate for developing a cost‐effective and robust chromatographic resin to purify monoclonal antibodies (mAbs). Finally, our approach can be extended to efficiently generate and evaluate cyclic peptide affinity ligands for other targets of interest. Biotechnol. Bioeng. 2013; 110: 857–870. © 2012 Wiley Periodicals, Inc.     

Removal of the 5‐nitro‐2‐pyridine‐sulfenyl protecting group from selenocysteine and cysteine by ascorbolysis

We previously reported on a method for the facile removal of 4‐methoxybenzyl and acetamidomethyl protecting groups from cysteine (Cys) and selenocysteine (Sec) using 2,2′‐dithiobis‐5‐nitropyridine dissolved in trifluoroacetic acid, with or without thioanisole. The use of this reaction mixture removes the protecting group and replaces it with a 2‐thio(5‐nitropyridyl) (5‐Npys) group. This results in either a mixed selenosulfide bond or disulfide bond (depending on the use of Sec or Cys), which can subsequently be reduced by thiolysis. A major disadvantage of thiolysis is that excess thiol must be used to drive the reaction to completion and then removed before using the Cys‐containing or Sec‐containing peptide in further applications. Here, we report a further advancement of this method as we have found that ascorbate at pH 4.5 and 25 °C will reduce the selenosulfide to the selenol. Ascorbolysis of the mixed disulfide between Cys and 5‐Npys is much less efficient but can be accomplished at higher concentrations of ascorbate at pH 7 and 37 °C with extended reaction times. We envision that our improved method will allow for in situ reactions with alkylating agents and electrophiles without the need for further purification, as well as a number of other applications. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Solvent selection and optimization of α‐chymotrypsin‐catalyzed synthesis of N‐Ac‐Phe‐Tyr‐NH2 using mixture design and response surface methodology

A peptide, N‐Ac‐Phe‐Tyr‐NH₂, with angiotensin I‐converting enzyme (ACE) inhibitor activity was synthesized by an α‐chymotrypsin‐catalyzed condensation reaction of N‐acetyl phenylalanine ethyl ester (N‐Ac‐Phe‐OEt) and tyrosinamide (Tyr‐NH₂). Three kinds of solvents: a Tris–HCl buffer (80 mM, pH 9.0), dimethylsulfoxide (DMSO), and acetonitrile were employed in this study. The optimum reaction solvent component was determined by simplex centroid mixture design. The synthesis efficiency was enhanced in an organic‐aqueous solvent (Tris‐HCl buffer: DMSO: acetonitrile = 2:1:1) in which 73.55% of the yield of N‐Ac‐Phe‐Tyr‐NH₂ could be achieved. Furthermore, the effect of reaction parameters on the yield was evaluated by response surface methodology (RSM) using a central composite rotatable design (CCRD). Based on a ridge max analysis, the optimum condition for this peptide synthesis included a reaction time of 7.4 min, a reaction temperature of 28.1°C, an enzyme activity of 98.9 U, and a substrate molar ratio (Phe:Tyr) of 1:2.8. The predicted and the actual (experimental) yields were 87.6 and 85.5%, respectively. The experimental design and RSM performed well in the optimization of synthesis of N‐Ac‐Phe‐Tyr‐NH₂, so it is expected to be an effective method for obtaining a good yield of enzymatic peptide. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Peptide purification by affinity chromatography based on α‐ketoacyl group chemistry

Significant advances have been achieved in the fields of peptide/protein synthesis, permitting the preparation of large, complex molecules. Shortcomings, however, continue to exist in the area of peptide purification. This paper details some studies we undertook to develop a new strategy for peptide purification based on a reactivity of α‐ketoacyl groups in peptides. The α‐ketoacyl peptide was generated from N^ε‐acyl‐lysyl‐peptide in the solid phase via a transamination reaction using glyoxylic acid and nickel(II) ion. Cleavage of the α‐ketoacyl group with o‐phenylenediamine gave the target peptide in an acceptable yield and purity. We first carried out a careful step‐by‐step optimization of the purification conditions using a model peptide. The strategy was then used in the purification of a transmembrane peptide that could not be effectively purified using a conventional RP‐HPLC system due to the strong hydrophobicity of the peptide and its high tendency to aggregate. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Oxime ligation in acetic acid: efficient synthesis of aminooxy‐peptide conjugates

Oxime ligation is a powerful tool in various bioconjugation strategies. Nevertheless, high reaction rates and quantitative yields are typically reported for aldehyde‐derived compounds. In contrary, keto groups react much slower, with quantitative yields achieved at 5 h for low‐molecular weight compounds and more than 15 h for polymers or dendrimers. In this communication, we report that oxime ligation proceeds rapidly with quantitative (>95%) conversion within 1.5–2 h in pure acetic acid. The practical utility of suggested technique is illustrated by the synthesis of peptide‐steroid and peptide‐polymer conjugates of model aminooxy‐peptides. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.