Early events during folding of wild-type staphylococcal nuclease and a single-tryptophan variant studied by ultrarapid mixing

A continuous-flow mixing device with a dead time of 100 micros coupled with intrinsic tryptophan and 1-anilinonaphthalene-8-sulfonate (ANS) fluorescence was used to monitor structure formation during early stages of the folding of staphylococcal nuclease (SNase). A variant with a unique tryptophan fluorophore in the N-terminal beta-barrel domain (Trp76 SNase) was obtained by replacing the single Trp140 in wild-type SNase with His in combination with Trp substitution of Phe76. A common background of P47G, P117G and H124L mutations was chosen in order to stabilize the protein and prevent accumulation of cis proline isomers under native conditions. In contrast to WT(*) SNase, which shows no changes in tryptophan fluorescence prior to the rate-limiting folding step ( approximately 100 ms), the F76W/W140H variant shows additional changes (enhancement) during an early folding phase with a time constant of 75 micros. Both proteins exhibit a major increase in ANS fluorescence and identical rates for this early folding event. These findings are consistent with the rapid accumulation of an ensemble of states containing a loosely packed hydrophobic core involving primarily the beta-barrel domain while the specific interactions in the alpha-helical domain involving Trp140 are formed only during the final stages of folding. The fact that both variants exhibit the same number of kinetic phases with very similar rates confirms that the folding mechanism is not perturbed by the F76W/W140H mutations. However, the Trp at position 76 reports on the rapid formation of a hydrophobic cluster in the N-terminal beta-sheet region while the wild-type Trp140 is silent during this early stage of folding. Quantitative modeling of the (un)folding kinetics and thermodynamics of these two proteins versus urea concentration revealed that the F76W/W140H mutation selectively destabilizes the native state relative to WT(*) SNase while the stability of transient intermediates remains unchanged, leading to accumulation of intermediates under equilibrium conditions at moderate denaturant concentrations.     

Dissection of β‐barrel outer membrane protein assembly pathways through characterizing BamA POTRA 1 mutants of Escherichia coli

BamA of Escherichia coli is an essential component of the hetero‐oligomeric machinery that mediates β‐barrel outer membrane protein (OMP) assembly. The C‐ and N‐termini of BamA fold into trans‐membrane β‐barrel and five soluble POTRA domains respectively. Detailed characterization of BamA POTRA 1 missense and deletion mutants revealed two competing OMP assembly pathways, one of which is followed by the archetypal trimeric β‐barrel OMPs, OmpF and LamB, and is dependent on POTRA 1. Interestingly, our data suggest that BamA also requires its POTRA 1 domain for proper assembly. The second pathway is independent of POTRA 1 and is exemplified by TolC. Site‐specific cross‐linking analysis revealed that the POTRA 1 domain of BamA interacts with SurA, a periplasmic chaperone required for the assembly of OmpF and LamB, but not that of TolC and BamA. The data suggest that SurA and BamA POTRA 1 domain function in concert to assist folding and assembly of most β‐barrel OMPs except for TolC, which folds into a unique soluble α‐helical barrel and an OM‐anchored β‐barrel. The two assembly pathways finally merge at some step beyond POTRA 1 but presumably before membrane insertion, which is thought to be catalysed by the trans‐membrane β‐barrel domain of BamA.     

Role of C-terminal region of Staphylococcal nuclease for foldability,stability, and activity

The role of the C-terminal region of Staphylococcal nuclease (SNase) was examined by deletion mutation. Deletions up to eight residues do not affect the structure and function. The structure and enzymatic activity were partially lost by deleting Ser141-Asn149 (Delta141-149), and deletion of Trp140-Asn149 (Delta140-149) resulted in further loss of structure and activity. A 13-residue deletion showed the same effect as the 10-residue deletion. Both Ser141Gln and Ser141Ala mutations for an eight-residue deletion mutant did not alter properties as well as Ser141A1a for full-length SNase. In contrast, Trp140Ala mutation for Delta141-149 shows the same effect as the deletion of Trp140. Trp140Ala mutation for full-length SNase causes the loss of native structure. These observations indicate the significance of the 140th and the 141st residues. The side-chain of the 140th residue is required to be tryptophan; however, the backbone of the 141st residue is solely critical for foldability, but the side-chain information is not crucial. All of the mutants that take a non-native conformation show enzymatic activity and inhibitor-induced folding, suggesting that foldability is required for the activity.     

Effect of salts on the stability and folding of staphylococcal nuclease

The stability and folding kinetics of wild-type and a mutant staphylococcal nuclease (SNase) at neutral pH are significantly perturbed by the presence of moderate to high concentrations of salts. Very substantial increases in stability toward thermal and urea denaturation were observed; for example, 0.4 M sodium sulfate increased the free energy of wild-type SNase by more than 2 kcal/mol. For the NCA SNase mutant, the presence of the salts abolished the cold denaturation observed at neutral pH with this variant, and substantially increased its stability. Significant effects of salts on the kinetics of refolding were also observed. For NCA SNase, the presence of the salts markedly increased the folding rates (up to 5-fold). On the other hand, chloride, in particular, substantially decreased the rate of folding of the wild-type protein. Since the rates of the slow phases due to proline isomerization were increased by salt, these steps must be coupled to conformational processes. Fluorescence energy transfer between the lone tryptophan (Trp140) and an engineered fluorescent acceptor at residue 64 revealed that the addition of a high concentration of KCl led to the formation of a transient folding intermediate not observed at lower salt concentrations, and in which residues 140 and 64 were much closer than in the native state. The salt-induced effects on the kinetics of folding are attributed to the enhanced stability of the transient folding intermediates. It is likely that the combination of the high net charge, due to the high isoelectric point, and the relatively low intrinsic hydrophobicity, leads to staphylococcal nuclease having only marginal stability at neutral pH. The salt-induced effects on the structure, stability, and kinetics of staphylococcal nuclease are attributed to the binding of counterions, namely, anions, resulting in minimization of intramolecular electrostatic repulsion. This leads to increased stability, more structure, and greater compactness, as observed. Consequently, localized electrostatic repulsion is present at neutral pH in SNase, probably contributing to its marginal stability. The results suggest that, in general, marginally stable globular proteins will be significantly stabilized by salts under conditions where they have a substantial net charge.     

Non‐native α‐helix formation is not necessary for folding of lipocalin: Comparison of burst‐phase folding between tear lipocalin and β‐lactoglobulin

Tear lipocalin and β‐lactoglobulin are members of the lipocalin superfamily. They have similar tertiary structures but unusually low overall sequence similarity. Non‐native helical structures are formed during the early stage of β‐lactoglobulin folding. To address whether the non‐native helix formation is found in the folding of other lipocalin superfamily proteins, the folding kinetics of a tear lipocalin variant were investigated by stopped‐flow methods measuring the time‐dependent changes in circular dichroism (CD) spectrum and small‐angle X‐ray scattering (SAXS). CD spectrum showed that extensive secondary structures are not formed during a burst‐phase (within a measurement dead time). The SAXS data showed that the radius of gyration becomes much smaller than in the unfolded state during the burst‐phase, indicating that the molecule is collapsed during an early stage of folding. Therefore, non‐native helix formation is not general for folding of all lipocalin family members. The non‐native helix content in the burst‐phase folding appears to depend on helical propensities of the amino acid sequence. Proteins 2009. © 2008 Wiley‐Liss, Inc.     

β‐Amino acids containing peptides and click‐cyclized peptide as β‐turn mimics: a comparative study with ‘conventional’ lactam‐ and disulfide‐bridged hexapeptides

The increasing interest in click chemistry and its use to stabilize turn structures led us to compare the propensity for β‐turn stabilization of different analogs designed as mimics of the β‐turn structure found in tendamistat. The β‐turn conformation of linear β‐amino acid‐containing peptides and triazole‐cyclized analogs were compared to ‘conventional’ lactam‐ and disulfide‐bridged hexapeptide analogs. Their 3D structures and their propensity to fold in β‐turns in solution, and for those not structured in solution in the presence of α‐amylase, were analyzed by NMR spectroscopy and by restrained molecular dynamics with energy minimization. The linear tetrapeptide Ac‐Ser‐Trp‐Arg‐Tyr‐NH₂ and both the amide bond‐cyclized, c[Pro‐Ser‐Trp‐Arg‐Tyr‐D ‐Ala] and the disulfide‐bridged, Ac‐c[Cys‐Ser‐Trp‐Arg‐Tyr‐Cys]‐NH₂ hexapeptides adopt dominantly in solution a β‐turn conformation closely related to the one observed in tendamistat. On the contrary, the β‐amino acid‐containing peptides such as Ac‐(R)‐β³‐hSer‐(S)‐Trp‐(S)‐β³‐hArg‐(S)‐β³‐hTyr‐NH₂, and the triazole cyclic peptide, c[Lys‐Ser‐Trp‐Arg‐Tyr‐βtA]‐NH₂, both specifically designed to mimic this β‐turn, do not adopt stable structures in solution and do not show any characteristics of β‐turn conformation. However, these unstructured peptides specifically interact in the active site of α‐amylase, as shown by TrNOESY and saturation transfer difference NMR experiments performed in the presence of the enzyme, and are displaced by acarbose, a specific α‐amylase inhibitor. Thus, in contrast to amide‐cyclized or disulfide‐bridged hexapeptides, β‐amino acid‐containing peptides and click‐cyclized peptides may not be regarded as β‐turn stabilizers, but can be considered as potential β‐turn inducers. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Simulating protein folding initiation sites using an alpha‐carbon‐only knowledge‐based force field

Protein folding is a hierarchical process where structure forms locally first, then globally. Some short sequence segments initiate folding through strong structural preferences that are independent of their three‐dimensional context in proteins. We have constructed a knowledge‐based force field in which the energy functions are conditional on local sequence patterns, as expressed in the hidden Markov model for local structure (HMMSTR). Carbon‐alpha force field (CALF) builds sequence specific statistical potentials based on database frequencies for α‐carbon virtual bond opening and dihedral angles, pair‐wise contacts and hydrogen bond donor‐acceptor pairs, and simulates folding via Brownian dynamics. We introduce hydrogen bond donor and acceptor potentials as α‐carbon probability fields that are conditional on the predicted local sequence. Constant temperature simulations were carried out using 27 peptides selected as putative folding initiation sites, each 12 residues in length, representing several different local structure motifs. Each 0.6 μs trajectory was clustered based on structure. Simulation convergence or representativeness was assessed by subdividing trajectories and comparing clusters. For 21 of the 27 sequences, the largest cluster made up more than half of the total trajectory. Of these 21 sequences, 14 had cluster centers that were at most 2.6 Å root mean square deviation (RMSD) from their native structure in the corresponding full‐length protein. To assess the adequacy of the energy function on nonlocal interactions, 11 full length native structures were relaxed using Brownian dynamics simulations. Equilibrated structures deviated from their native states but retained their overall topology and compactness. A simple potential that folds proteins locally and stabilizes proteins globally may enable a more realistic understanding of hierarchical folding pathways. Proteins 2009. © 2008 Wiley‐Liss, Inc.     

The role of tryptophan in staphylococcal nuclease stability

Staphylococcal nuclease (SNase) has a single Trp residue at position 140. Circular dichroism, intrinsic and ANS-binding fluorescence, chemical titrations and enzymatic assays were used to measure the changes of its structure, stability and activities as the Trp was mutated or replaced to other positions. The results show that W140 is critical to SNase structure, stability, and function. Mutants such as W140A, F61W/W140A, and Y93W/W140A have unfolding, corrupted secondary and tertiary structures, diminished structural stability and attenuated catalytic activity as compared to the wild type. The deleterious effects of W140 substitution cannot be compensated by concurrent changes at topographical locations of position 61 or 93. Local hydrophobicity defined as a sum of hydrophobicity around a given residue within a distance is found to be a relevant property to SNase folding and stability.     

Capping motifs stabilize the leucine‐rich repeat protein PP32 and rigidify adjacent repeats

Capping motifs are found to flank most β‐strand‐containing repeat proteins. To better understand the roles of these capping motifs in organizing structure and stability, we carried out folding and solution NMR studies on the leucine‐rich repeat (LRR) domain of PP32, which is composed of five tandem LRR, capped by α‐helical and β‐hairpin motifs on the N‐ and C‐termini. We were able to purify PP32 constructs lacking either cap and containing destabilizing substitutions. Removing the C‐cap results in complete unfolding of PP32. Removing the N‐cap has a much less severe effect, decreasing stability but retaining much of its secondary structure. In contrast, the dynamics and tertiary structure of the first two repeats are significantly perturbed, based on ¹H‐¹⁵N relaxation studies, chemical shift perturbations, and residual dipolar couplings. However, more distal repeats (3 to C‐cap) retain their native tertiary structure. In this regard, the N‐cap drives the folding of adjacent repeats from what appears to be a molten‐globule‐like state. This interpretation is supported by extensive analysis using core packing substitutions in the full‐length and N‐cap‐truncated PP32. This work highlights the importance of caps to the stability and structural integrity of β‐strand‐containing LRR proteins, and emphasizes the different contributions of the N‐ and C‐terminal caps.     

An interdomain disulfide bridge links the NtA and first FS domain in agrin

Agrin is a multidomain heparan sulfate proteoglycan involved in postsynaptic differentiation at the neuromuscular junction. Binding of agrin to synaptic basal lamina is mediated by the N‐terminal agrin (NtA) domain. The NtA domain of agrin is followed by a tandem of nine follistatin‐like (FS) domains forming a rod‐like spacer to the laminin G‐like domains of the molecule. Here we report that the most C‐terminal cysteine residue of NtA (Cys123) forms an interdomain disulfide bond with the FOLN subdomain of the FS module. Remarkably, this single cysteine is flanked by Leu117 and Val124, which are two essential β‐branched amino acids forming the heterocomplex of NtA with the γ1 chain of laminin. Moreover, we show that this covalent linkage compensates for the seven amino acid residue splice insert at the very C‐terminal helix H3 and causes a rigid interface between NtA and FS independent of the alternative mRNA splice event. These results suggest that the interdomain disulfide bond between the NtA and the first FS domain might be important for the proper folding of agrin.     

Helix stability of oligoglycine,oligoalanine, and oligo‐β‐alanine dodecamers reflected by hydrogen‐bond persistence

Helices are important structural/recognition elements in proteins and peptides. Stability and conformational differences between helices composed of α‐ and β‐amino acids as scaffolds for mimicry of helix recognition has become a theme in medicinal chemistry. Furthermore, helices formed by β‐amino acids are experimentally more stable than those formed by α‐amino acids. This is paradoxical because the larger sizes of the hydrogen‐bonding rings required by the extra methylene groups should lead to entropic destabilization. In this study, molecular dynamics simulations using the second‐generation force field, AMOEBA (Ponder, J.W., et al., Current status of the AMOEBA polarizable force field. J Phys Chem B, 2010. 114 (8): p. 2549–64.) explored the stability and hydrogen‐bonding patterns of capped oligo‐β‐alanine, oligoalanine, and oligoglycine dodecamers in water. The MD simulations showed that oligo‐β‐alanine has strong acceptor+2 hydrogen bonds, but surprisingly did not contain a large content of 3₁₂‐helical structures, possibly due to the sparse distribution of the 3₁₂‐helical structure and other structures with acceptor+2 hydrogen bonds. On the other hand, despite its backbone flexibility, the β‐alanine dodecamer had more stable and persistent <3.0 Å hydrogen bonds. Its structure was dominated more by multicentered hydrogen bonds than either oligoglycine or oligoalanine helices. The 3₁ (PII) helical structure, prevalent in oligoglycine and oligoalanine, does not appear to be stable in oligo‐β‐alanine indicating its competition with other structures (stacking structure as indicated by MD analyses). These differences are among the factors that shape helical structural preferences and the relative stabilities of these three oligopeptides. Proteins 2014; 82:3043–3061. © 2014 Wiley Periodicals, Inc.     

Glycerol‐induced folding of unstructured disulfide‐deficient lysozyme into a native‐like conformation

2SS[6‐127,64‐80] variant of lysozyme which has two disulfide bridges, Cys6‐Cys127 and Cys64‐Cys80, and lacks the other two disulfide bridges, Cys30‐Cys115 and Cys76‐Cys94, was quite unstructured in water, but a part of the polypeptide chain was gradually frozen into a native‐like conformation with increasing glycerol concentration. It was monitored from the protection factors of amide hydrogens against H/D exchange. In solution containing various concentrations of glycerol, H/D exchange reactions were carried out at pH* 3.0 and 4°C. Then, ¹H‐¹⁵N‐HSQC spectra of partially deuterated protein were measured in a quenching buffer for H/D exchange (95% DMSO/5% D₂O mixture at pH* 5.5 adjusted with dichloroacetate). In a solution of 10% glycerol, the protection factors were nearly equal to 10 at most of residues. With increasing glycerol concentration, some selected regions were further protected, and their protection factors reached about a 1000 in 30% glycerol solution. The highly protected residues were included in A‐, B‐, and C‐helices and β3‐strand, and especially centered on Ile 55 and Leu 56. In 2SS[6‐127,64‐80], long‐range interactions were recovered due to the preferential hydration by glycerol in the hydrophobic box of the α‐domain. Glycerol‐induced recovering of the native‐like structure is discussed from the viewpoint of molten globules growing with the protein folding. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 665–675, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

A comparison of the different helices adopted by ��- and ��-peptides suggests different reasons for their stability

The right‐handed α‐helix is the dominant helical fold of α‐peptides, whereas the left‐handed 3₁₄‐helix is the dominant helical fold of β‐peptides. Using molecular dynamics simulations, the properties of α‐helical α‐peptides and 3₁₄‐helical β‐peptides with different C‐terminal protonation states and in the solvents water and methanol are compared. The observed energetic and entropic differences can be traced to differences in the polarity of the solvent‐accessible surface area and, in particular, the solute dipole moments, suggesting different reasons for their stability.     

Comprehensive secondary‐structure analysis of disulfide variants of lysozyme by synchrotron‐radiation vacuum‐ultraviolet circular dichroism

To elucidate the effects of specific disulfide bridges (Cys6‐Cys127, Cys30‐Cys115, Cys64‐Cys80, and Cys76‐Cys94) on the secondary structure of hen lysozyme, the vacuum‐ultraviolet circular dichroism (VUVCD) spectra of 13 species of disulfide‐deficient variants in which Cys residues were replaced with Ala or Ser residues were measured down to 170 nm at pH 2.9 and 25°C using a synchrotron‐radiation VUVCD spectrophotometer. Each variant exhibited a VUVCD spectrum characteristic of a considerable amount of residual secondary structures depending on the positions and numbers of deleted disulfide bridges. The contents of α‐helices, β‐strands, turns, and unordered structures were estimated with the SELCON3 program using the VUVCD spectra and PDB data of 31 reference proteins. The numbers of α‐helix and β‐strand segments were also estimated from the VUVCD data. In general, the secondary structures were more effectively stabilized through entropic forces as the number of disulfide bridges increased and as they were formed over larger distances in the primary structure. The structures of three‐disulfide variants were similar to that of the wild type, but other variants exhibited diminished α‐helices with a border between the ordered and disordered structures around the two‐disulfide variants. The sequences of the secondary structures were predicted for all the variants by combining VUVCD data with a neural‐network method. These results revealed the characteristic role of each disulfide bridge in the formation of secondary structures. Proteins 2009. © 2009 Wiley‐Liss, Inc.     

Dissociation of c‐Met phosphotyrosine sites in human cells in response to mouse hepatocyte growth factor but not human hepatocyte growth factor: the possible roles of different amino acids in different species

Hepatocyte growth factor (HGF) is essential for embryogenesis, tissue regeneration and tumour malignancy through the activation of its receptor, c‐Met. We previously demonstrated that HGF α‐chain hairpin–loop, K1 domain and β‐chain are required for c‐Met signalling. The sequential phosphorylation of tyrosine residues, from c‐Met kinase domain to multidocking regions, is required for HGF‐signalling transduction. Herein, we provide evidence that the disconcerted activation of c‐Met tyrosine regions fails to induce biological functions. When human cells were incubated with ‘mouse HGF’, kinase domain activation (i.e. phospho‐Tyr‐1230/34/35) became evident, but the multidocking site (i.e. Tyr‐1349) was not phosphorylated, resulting in unsuccessful induction of migration and mitogenesis. The binding ability of mouse HGF α‐chain, or of β‐chain, to human c‐Met was lower than that of human HGF, as evidenced by HGF–chimera assay. Notably, only four amino acid positions in HGF α‐chain hairpin–loop and K1 domain and six positions in β‐chain differed between human HGF and mouse HGF. The human‐specific amino acids (such as Gln‐95 in hairpin–loop, Arg‐134 in K1 domain and Cys‐561 in β‐chain) may be important for accurate c‐Met assembly and signalling transduction. Copyright © 2012 John Wiley & Sons, Ltd.     

Energy transfer in lactose repressor protein modified with N-[[(iodoacetyl)amino]ethyl]-5-naphthylamine-1-sulfonate

Energy transfer between the two tryptophan residues in the lactose repressor protein and the fluorescent moiety of the cysteine-specific reagent N-[[(iodoacetyl)amino]ethyl]-5-naphthylamine-1-sulfonate (1,5-IAEDANS) has been examined. Modification of repressor with this compound did not affect operator or inducer binding. 1,5-IAEDANS reacted primarily with Cys140 in wild-type repressor [Schneider et al. (1984) Biochemistry 23, 2221]; in the presence of inducer, modification at Cys107 increased, while reaction at Cys140 remained unchanged. Energy transfer between tryptophans and the AEDANS moiety(ies) in wild-type lac repressor occurred with an efficiency of 6.7 +/- 1.9% in the absence and 7.8 +/- 1.6% in the presence of inducer. The distance between the Trp donor(s) and the acceptor in wild-type repressor was calculated to be in the range approximately 35 A under both conditions. The similarity in efficiency despite large differences in the amount of acceptor attached to Cys107 when inducer is bound indicates that the AEDANS group at position 107 does not participate significantly in energy transfer and that the label at position 140 acts as the primary acceptor group. The similarity of energy-transfer efficiency (7.1 +/- 3.8%) observed for 1,5-IAEDANS-modified monomeric mutant repressor (Y282D) indicates that the transfer is primarily intrasubunit in the native tetramer. Measurements using two mutant repressors (each with a single tryptophan and modified with 1,5-IAEDANS) demonstrated that both tryptophans can serve as donor in the energy-transfer process. The W201Y repressor (containing Trp220) exhibited a transfer efficiency lower than wild type (5.6 +/- 2.4%), corresponding to a slightly larger distance between the donor-acceptor pair in this mutant.(ABSTRACT TRUNCATED AT 250 WORDS)     

Compact dimension of denatured states of staphylococcal nuclease

Fluorescence and circular dichroism stopped-flow have been widely used to determine the kinetics of protein folding including folding rates and possible folding pathways. Yet, these measurements are not able to provide spatial information of protein folding/unfolding. Especially, conformations of denatured states cannot be elaborated in detail. In this study, we apply the method of fluorescence energy transfer with a stopped-flow technique to study global structural changes of the staphylococcal nuclease (SNase) mutant K45C, where lysine 45 is replaced by cysteine, during folding and unfolding. By labeling the thiol group of cysteine with TNB (5,5'-dithiobis-2-nitrobenzoic acid) as an energy acceptor and the tryptophan at position 140 as a donor, distance changes between the acceptor and the donor during folding and unfolding are measured from the efficiency of energy transfer. Results indicate that the denatured states of SNase are highly compact regardless of how the denatured states (pH-induced or GdmCl-induced) are induced. The range of distance changes between two probes is between 25.6 and 25.4 A while it is 20.4 A for the native state. Furthermore, the folding process consists of three kinetic phases while the unfolding process is a single phase. These observations agree with our previous sequential model: N(0) left arrow over right arrow D(1) left arrow over right arrow D(2) left arrow over right arrow D(3) (Chen et al., J Mol Biol 1991;220:771-778). The efficiency of protein folding may be attributed to initiating the folding process from these compact denatured structures.     

Crystal structures of OprN and OprJ,outer membrane factors of multidrug tripartite efflux pumps of Pseudomonas aeruginosa

The genome of Pseudomonas aeruginosa encodes tripartite efflux pumps that extrude functionally and structurally dissimilar antibiotics from the bacterial cell. MexAB‐OprM, MexCD‐OprJ, MexEF‐OprN, and MexXY‐OprM are the main tripartite efflux pumps responsible for multidrug resistance in P. aeruginosa. The outer membrane factors OprN, OprJ, and OprM are essential components of functional tripartite efflux pumps. To elucidate the structural basis of multidrug resistance, we determined the crystal structures of OprN and OprJ. These structures revealed several features, including tri‐acylation of the N‐terminal cysteine, a small pore in the β‐barrel domain, and a tightly sealed gate in the α‐barrel domain. Despite the overall similarity of OprN, OprJ, and OprM, a comparison of their structures and electrostatic distributions revealed subtle differences at the periplasmic end of the α‐barrel domain. These results suggested that the overall structures of these outer membrane factors are specifically optimized for particular tripartite efflux pumps. Proteins 2016; 84:759–769. © 2016 Wiley Periodicals, Inc.     

An allosteric pathway explains beneficial fitness in yeast for long‐range mutations in an essential TIM barrel enzyme

Protein evolution proceeds by a complex response of organismal fitness to mutations that can simultaneously affect protein stability, structure, and enzymatic activity. To probe the relationship between genotype and phenotype, we chose a fundamental paradigm for protein evolution, folding, and design, the (βα)₈ TIM barrel fold. Here, we demonstrate the role of long‐range allosteric interactions in the adaptation of an essential hyperthermophilic TIM barrel enzyme to mesophilic conditions in a yeast host. Beneficial fitness effects observed with single and double mutations of the canonical βα‐hairpin clamps and the α‐helical shell distal to the active site revealed an underlying energy network between opposite faces of the cylindrical β‐barrel. We experimentally determined the fitness of multiple mutants in the energetic phase plane, contrasting the energy barrier of the chemical reaction and the folding free energy of the protein. For the system studied, the reaction energy barrier was the primary determinant of organism fitness. Our observations of long‐range epistatic interactions uncovered an allosteric pathway in an ancient and ubiquitous enzyme that may provide a novel way of designing proteins with a desired activity and stability profile.     

Folding of human lysozyme in vivo by the formation of an alternative disulfide bond.

The mutant h-lysozyme, W64CC65A, with Trp64 and Cys65 replaced by Cys and Ala, respectively, was secreted by yeast and purified. Peptide mapping confirmed that W64CC65A contained a nonnative Cys64-Cys81 bond and three native disulfide bonds. The mutant had 2% of the lytic activity of the wild-type lysozyme. The midpoint concentration of the guanidine hydrochloride denaturation curve, the [D]1/2, was 2.7 M for W64CC65A at pH 3.0 and 25 degrees C, whereas the [D]1/2 for the wild-type h-lysozyme was 2.9 M. These results show that the W64CC65A protein is a compactly folded molecule. Our previous results, using the mutant C81A, indicate that Cys81 is not required for correct folding and activity, whereas Cys65 is indispensable (Taniyama, Y., Yamamoto, Y., Kuroki, R., and Kikuchi, M. (1990) J. Biol. Chem. 65, 7570-7575). Cys64 substituted for Cys65 in W64CC65A, even though the distance between the alpha-carbons at positions 64 and 81 in the wild-type h-lysozyme is not favorable for forming a disulfide bond. Unlike C81A, the mutant W64CC65/81A, which has the additional substitution of Ala for Cys81, did not fold. These results suggest that the absence of both the Cys64-Cys81 bond and the amino acid residue Trp64 caused the misfolding or destabilization of W64CC65/81A in vivo. It is proposed that the formation of the alternative bond, Cys64-Cys81 is important for the folding of W64CC65A in vivo.