DNA helicases displace streptavidin from biotin-labeled oligonucleotides

Helicases are enzymes that use energy derived from nucleoside triphosphate hydrolysis to unwind double-stranded (ds) DNA, a process vital to virtually every phase of DNA metabolism. The helicases used in this study, gp41 and Dda, are from the bacteriophage T4, an excellent system for studying enzymes that process DNA. gp41 is the replicative helicase and has been shown to form a hexamer in the presence of ATP. In this study, protein cross-linking was performed in the presence of either linear or circular single-stranded (ss) DNA substrates to determine the topology of gp41 binding to ssDNA. Results indicate that the hexamer binds ssDNA by encircling it, in a manner similar to that of other hexameric helicases. A new assay was developed for studying enzymatic activity of gp41 and Dda on single-stranded DNA. The rate of dissociation of streptavidin from various biotinylated oligonucleotides was determined in the presence of helicase by an electrophoretic mobility shift assay. gp41 and Dda were found to significantly enhance the dissociation rate of streptavidin from biotin-labeled oligonucleotides in an ATP-dependent reaction. Helicase-catalyzed dissociation of streptavidin from the 3'-end of a biotin-labeled 62-mer oligonucleotide occurred with a first-order rate of 0.17 min-1, which is over 500-fold faster than the spontaneous dissociation rate of biotin from streptavidin. Dda activity leads to even faster displacement of streptavidin from the 3' end of the 62-mer, with a first-order rate of 7.9 s-1. This is more than a million-fold greater than the spontaneous dissociation rate. There was no enhancement of streptavidin dissociation from the 5'-biotin-labeled oligonucleotide by either helicase. The fact that each helicase was capable of dislodging streptavidin from the 3'-biotin label suggests that these enzymes are capable of imparting a force on a molecule blocking their path. The difference in displacement between the 5' and 3' ends of the oligonucleotide is also consistent with the possibility of a 5'-to-3' directional bias in translocation on ssDNA for each helicase.     

Hepatitis C virus NS3 and simian virus 40 T antigen helicases displace streptavidin from 5'-biotinylated oligonucleotides but not from 3'-biotinylated oligonucleotides: evidence for directional bias in translocation on single-stranded DNA

Helicases are enzymes that use energy from nucleoside triphosphate hydrolysis to unwind double-stranded (ds) DNA, a process vital to virtually every phase of DNA metabolism. Helicases have been classified as either 5'-to-3' or 3'-to-5' on the basis of their ability to unwind duplex DNA adjacent to either a 5' or 3' single-stranded (ss) DNA overhang. However, there has been debate as to whether this substrate preference is indicative of unidirectional translocation on ssDNA. We developed an assay that monitors the ability of a helicase to displace streptavidin from biotinylated oligonucleotides [Morris, P. D., and Raney, K. D. (1999) Biochemistry 38, 5164-5171]. Two helicases identified as having 5'-to-3' polarity displaced streptavidin from the 3'-end of biotinylated oligonucleotides but not from the 5'-end. We performed similar experiments using the 3'-to-5' helicases from the hepatitis C virus (NS3) and SV40 virus (SV40 T antigen). NS3 and SV40 T antigen were able to displace streptavidin from a 5'-biotinylated oligonucleotide but not from a 3'-biotinylated oligonucleotide. NS3 and SV40 T antigen enhanced the spontaneous rate of dissociation of streptavidin from biotin 340-fold and 1700-fold, respectively. The ssDNA binding protein, gp32, did not enhance dissociation of streptavidin from either end of an oligonucleotide. For NS3, the rate of displacement was faster from a 5'-biotinylated 60mer than from a 5'-biotinylated 30mer. The strong directional bias in streptavidin displacement activity exhibited by each helicase is consistent with a directional bias in translocation on ssDNA. The dependence of the reaction with NS3 on the oligonucleotide length suggests that multiple NS3 monomers are necessary for optimal activity.     

Distribution of prolyl oligopeptidase in the mouse whole-body sections and peripheral tissues

Prolyl oligopeptidase (POP) is a serine endopeptidase that hydrolyses proline-containing peptides shorter than 30-mer, including many bioactive peptides. The distribution of POP in the brain has been studied but little is known about the distribution of peripheral POP. We used immunohistochemistry to localize POP in mouse whole-body sections and at the cellular level in peripheral tissues. Furthermore, we used a POP activity assay to reveal the associations between POP protein and its enzymatic activity. The highest POP protein densities were found in brain, kidney, testis and thymus, but in the liver the amounts of POP protein were small. There were remarkable differences between the distribution of POP protein and activity. The highest POP activities were found in the liver and testis while kidney had the lowest activity. In peripheral tissues, POP was present in various cell types both in the cytoplasm and nucleus of the cells, in contrast to the brain where no nuclear localization was detected. These findings support the proposed role of POP in cell proliferation in peripheral tissues. The dissociation of the distribution of POP protein and its enzymatic activity points to nonhydrolytic functions of POP and to strict endogenous regulation of POP activity.     

Determination of matrix metalloproteinase activity using biotinylated gelatin

Matrix metalloproteinases (MMPs) and, specifically, MMP-2 (gelatinase A) and MMP-9 (gelatinase B) are strongly associated with malignant progression and matrix remodeling. These enzymes are a subject of intensive studies involving screening of comprehensive chemical libraries of synthetic inhibitors. There is no simple method available for measurement of activity of gelatinases and related MMPs. Here, we report a simple, inexpensive, and highly sensitive assay for MMP activity. The assay performed in a 96-well microtiter plate format employs biotin-labeled gelatin (denatured collagen type I) as a substrate. Following the substrate cleavage, only the proteolytic fragments bearing biotin moieties are captured by streptavidin coated on the plastic surface and the captured fragments with at least two biotin molecules should be revealed by streptavidin conjugated with horseradish peroxidase. The frequency of lysine residues is low in collagen type I relative to the MMP cleavage sequences (PXGX). Accordingly, the majority of the cleavage products must be devoid of biotin or possess only one biotin group. Both of these types of fragments cannot be recognized by the horseradish peroxidase-streptavidin conjugate. Therefore, higher gelatinolytic activity is associated with lower signal in the assay. This 2-h assay allows identification of gelatinolytic activity of MMP-2 in concentrations as low as 0.16 ng/ml. The sensitivity of this ELISA-like assay is comparable to that of gelatin zymography, a method widely used to detect gelatinases. However, in contrast to zymography, the assay directly measures the enzymatic activity of MMP samples. The gelatinolytic activity assay permits efficient analyses and screening of the MMP inhibitor panels and allows quantitation of gelatinolytic activity of various MMPs in solution as well as on cell surfaces.     

Proprotein convertase activation of aggrecanases in cartilage in situ

Proteolytic degradation of the major cartilage macromolecules, aggrecan and type II collagen, is a key pathological event in osteoarthritis (OA). ADAMTS-4 and ADAMTS-5, the primary aggrecanases capable of cartilage aggrecan cleavage, are synthesized as latent enzymes and require prodomain removal for activity. The N-termini of the mature proteases suggest that activation involves a proprotein convertase, but the specific family member responsible for aggrecanase activation in cartilage in situ has not been identified. Here we describe purification of a proprotein convertase activity from human OA cartilage. Through biochemical characterization and the use of siRNA, PACE4 was identified as a proprotein convertase responsible for activation of aggrecanases in osteoarthritic and cytokine-stimulated cartilage. Posttranslational activation of ADAMTS-4 and ADAMTS-5 was observed in the extracellular milieu of cartilage, resulting in aggrecan degradation. These findings suggest that PACE4 represents a novel target for the development of OA therapeutics.     

TEM-1 beta-lactamase as a scaffold for protein recognition and assay

A large number of different proteins or protein domains have been investigated as possible scaffolds to engineer antibody-like molecules. We have previously shown that the TEM-1 beta-lactamase can accommodate insertions of random sequences in two loops surrounding its active site without compromising its activity. From the libraries that were generated, active enzymes binding with high affinities to monoclonal antibodies raised against prostate-specific antigen, a protein unrelated to beta-lactamase, could be isolated. Antibody binding was shown to affect markedly the enzyme activity. As a consequence, these enzymes have the potential to be used as signaling molecules in direct or competitive homogeneous immunoassay. Preliminary results showed that beta-lactamase clones binding to streptavidin could also be isolated, indicating that some enzymes in the libraries have the ability to recognize proteins other than antibodies. In this paper, we show that, in addition to beta-lactamases binding to streptavidin, beta-lactamase clones binding to horse spleen ferritin and beta-galactosidase could be isolated. Affinity maturation of a clone binding to ferritin allowed obtaining beta-lactamases with affinities comprised between 10 and 20 nM (Kd) for the protein. Contrary to what was observed for beta-lactamases issued from selections on antibodies, enzyme complexation induced only a modest effect on enzyme activity, in the three cases studied. This kind of enzyme could prove useful in replacement of enzyme-conjugated antibodies in enzyme-linked immunosorbant assays (ELISA) or in other applications that use antibodies conjugated to an enzyme.     

Quantification of active caspase 3 in apoptotic cells

We describe an enzyme-linked immunosorbent assay (ELISA) for quantifying relative amounts of active caspase 3 in apoptotic cells. Covalent modification of caspase 3 active sites with a biotinylated inhibitor differentiates active from latent caspases. Capture on an ELISA plate with an antibody specific for caspase 3 makes the assay specific for caspase 3. Detection is with horseradish peroxidase (HRP)-conjugated streptavidin that binds to the biotinylated inhibitor covalently bound to caspase 3. Using the assay we detected 6.6 ng active caspase 3 per 10(6) apoptotic staurosporine-treated Jurkat cells. Specificity of the assay for caspase 3 was demonstrated by lack of signal with purified caspases 2, 7, 8, and 10 that were modified by a biotinylated inhibitor. Specificity was also demonstrated by lack of signal with apoptotic MCF-7 cells which do not express caspase 3. The ability to discriminate between active and latent caspase 3 was shown by Western blotting with HRP-streptavidin and anti-caspase 3. Although latent caspase 3 was captured it was not covalently modified with the biotinylated inhibitor. The basic principle of using a covalent inhibitor to identify active enzymes and an antibody to differentiate between enzymes with similar activities has potential for quantifying active members of many classes of enzymes.     

Autodisplay of streptavidin

Streptavidin was expressed on the outer membrane of E. coli as a recombinant fusion protein with an autotransporter domain called AIDA-I (adhesin involved in diffuse adherence) using autodisplay technology. The autodisplay of streptavidin was confirmed by SDS-PAGE of the outer membrane proteins, and the number of autodisplayed streptavidin molecules on a single E. coli cell was evaluated with densitometric analysis. The biotin-binding activity of the autodisplayed streptavidin was estimated after treatment with fluorescently labeled biotin by fluorescence microscopy and flow cytometry. The biotin-binding activity of the E. coli with autodisplayed streptavidin was compared with the activity of streptavidin immobilized on magnetic beads. Finally, the outer membrane presenting autodisplayed streptavidin was isolated and layered on a 96-well microplate for an immunoassay.     

Evolutionary relationships of the prolyl oligopeptidase family enzymes.

The prolyl oligopeptidase (POP) family of serine proteases includes prolyl oligopeptidase, dipeptidyl peptidase IV, acylaminoacyl peptidase and oligopeptidase B. The enzymes of this family specifically hydrolyze oligopeptides with less than 30 amino acids. Many of the POP family enzymes have evoked pharmaceutical interest as they have roles in the regulation of peptide hormones and are involved in a variety of diseases such as dementia, trypanosomiasis and type 2 diabetes. In this study we have clarified the evolutionary relationships of these four POP family enzymes and analyzed POP sequences from different sources. The phylogenetic trees indicate that the four enzymes were present in the last common ancestor of all life forms and that the beta-propeller domain has been part of the family for billions of years. There are striking differences in the mutation rates between the enzymes and POP was found to be the most conserved enzyme of this family. However, the localization of this enzyme has changed throughout evolution, as three archaeal POPs seem to be membrane bound and one third of the bacterial as well as two eukaryotic POPs were found to be secreted out of the cell. There are also considerable distinctions between the mutation rates of the different substrate binding subsites of POP. This information may help in the development of species-specific POP inhibitors.     

Padlock oligonucleotides as a tool for labeling superhelical DNA

Labeling of a covalently closed circular double-stranded DNA was achieved using a so-called ‘padlock oligonucleotide’. The oligonucleotide was targeted to a sequence which is present in the replication origin of phage f1 and thus in numerous commonly used plasmids. After winding around the double-stranded target DNA sequence by ligand-induced triple helix formation, a biotinylated oligonucleotide was circularized using T4 DNA ligase and in this way became catenated to the plasmid. A gel shift assay was developed to measure the extent of plasmid modification by the padlock oligonucleotide. A similar assay showed that a modified supercoiled plasmid was capable of binding one streptavidin molecule thanks to the biotinylated oligonucleotide and that this binding was quantitative. The catenated complex was visualized by electron and atomic force microscopies using streptavidin conjugates or single strand-binding proteins as protein tags for the padlock oligonucleotide. This method provides a versatile tool for plasmid functionalization which offers new perspectives in the physical study of supercoiled DNA and in the development of improved vectors for gene therapy.     

Colorimetric competitive inhibition method for the quantification of avidin, streptavidin and biotin.

A colorimetric competitive inhibition assay for avidin, streptavidin and biotin was developed. The method for avidin or streptavidin was based on the competitive binding between avidin or streptavidin and a streptavidin-enzyme conjugate for biotinylated dextrin immobilized on the surface of a microtitre plate. For biotin quantitation the competition is between free biotin and the immobilized biotin for the streptavidin-enzyme conjugate. The limits of detection which was determined as the concentration of competitor required to give 90% of maximal absorbency (100% inhibition) was approximately 20 ng/100 microl per assay for avidin and streptavidin and 0.4 pg/100 microl per assay for biotin. The methods are simple, rapid, highly sensitive and adaptable to high throughput analysis.     

Yeast Pif1 Helicase Exhibits a One-base-pair Stepping Mechanism for Unwinding Duplex DNA

Kinetic analysis of the DNA unwinding and translocation activities of helicases is necessary for characterization of the biochemical mechanism(s) for this class of enzymes. Saccharomyces cerevisiae Pif1 helicase was characterized using presteady state kinetics to determine rates of DNA unwinding, displacement of streptavidin from biotinylated DNA, translocation on single-stranded DNA (ssDNA), and ATP hydrolysis activities. Unwinding of substrates containing varying duplex lengths was fit globally to a model for stepwise unwinding and resulted in an unwinding rate of ∼75 bp/s and a kinetic step size of 1 base pair. Pif1 is capable of displacing streptavidin from biotinylated oligonucleotides with a linear increase in the rates as the length of the oligonucleotides increased. The rate of translocation on ssDNA was determined by measuring dissociation from varying lengths of ssDNA and is essentially the same as the rate of unwinding of dsDNA, making Pif1 an active helicase. The ATPase activity of Pif1 on ssDNA was determined using fluorescently labeled phosphate-binding protein to measure the rate of phosphate release. The quantity of phosphate released corresponds to a chemical efficiency of 0.84 ATP/nucleotides translocated. Hence, when all of the kinetic data are considered, Pif1 appears to move along DNA in single nucleotide or base pair steps, powered by hydrolysis of 1 molecule of ATP.     

Development of a fluorescence resonance energy transfer assay for measuring the activity of Streptococcus pneumoniae DNA ligase,an enzyme essential for DNA replication,repair, and recombination

DNA ligase is an enzyme essential for DNA replication, repair, and recombination in all organisms. Bacterial DNA ligases catalyze a NAD(+)-dependent DNA ligation reaction, i.e., the formation of a phosphodiester bond between adjacent 3'-OH and 5'-phosphate termini of dsDNA. Due to their essential nature, unique cofactor requirement, and widespread existence in nature, bacterial DNA ligases appear to be valuable targets for identifying novel antibacterial agents. To explore bacterial DNA ligases as antibacterial targets and further characterize them, we developed a simple, robust, homogeneous time-resolved fluorescence resonance energy transfer assay (TR-FRET) for measuring Streptococcus pneumoniae DNA ligase activity. This assay involves the use of one dsDNA molecule labeled with biotin and another dsDNA molecule labeled with Cy5, an acceptor fluorophore. During ligation reactions, the donor fluorophore europium (Eu(3+)) labeled with streptavidin was added to the assay mixtures, which bound to the biotin label on the ligated products. This in turn resulted in the FRET from Eu(3+) to Cy5 due to their close proximity. The formation of ligation products was measured by monitoring the emission at 665nm. This assay was validated by the experiments showing that the DNA ligase activity required NAD(+) and MgCl(2), and was inhibited by NMN and AMP, products of the ligase reaction. Using this assay, we determined the K(m) values of the enzyme for dsDNA substrates and NAD(+), and the IC(50) values of NMN and AMP, examined the effects of MgCl(2) and PEG(8000) on the enzyme activity, optimized the concentrations of Eu(3+) in the assay, and validated its utilities for high-throughput screening and biochemical characterizations of this class of enzymes.     

A streptavidin mutant useful for directed immobilization on solid surfaces.

A streptavidin mutant has been designed and produced that allows the specific, covalent immobilization of streptavidin on solid surfaces. This streptavidin mutant was constructed by fusing a six-residue sequence, containing a single cysteine, to the carboxyl terminus of streptavidin. Because this mutant has no other cysteine residues, the reactive sulfhydryl group of the cysteine residue serves as a unique immobilization site for conjugation using sulfhydryl chemistry. This streptavidin mutant was efficiently immobilized on maleimide-coated solid surfaces via its unique immobilization site. Characterization of the immobilized streptavidin mutant for the ability to bind to biotinylated macromolecules and the dissociation rates of bound biotin showed that the biotin-binding properties of this mutant were minimally affected by immobilization on solid surfaces. This streptavidin could be readily incorporated into a wide variety of solid-phase diagnostic tests and biomedical assays. This could enhance the performance of streptavidin-based solid-phase assay systems.     

Exploration of the One-Bead One-Compound Methodology for the Design of Prolyl Oligopeptidase Substrates

Here we describe the design, synthesis and evaluation of the first solid-phase substrates for prolyl oligopeptidase (POP), a cytosolic serine peptidase associated with schizophrenia, bipolar affective disorder and related neuropsychiatric disorders. This study seeks to contribute to the future design of a one-bead one-compound (OBOC) peptide library of POP substrates, based on an intramolecular energy transfer substrate. Unexpectedly, the enzymatic evaluation of the substrates attached on solid-phase by means of the HMBA linker were cleaved through the ester bond, thereby suggesting an unknown esterase activity of POP, in addition to its known peptidase activity. By performing multiple activity assays, we have confirmed the esterase activity of this enzyme and its capacity to process the substrates on solid-phase. Finally, we tested a new linker, compatible with both the solid-phase peptide-synthesis used and the enzymatic assay, for application in the future design of an OBOC library.     

Using surface plasmon resonance to directly determine binding affinities of combinatorially selected cyclopeptides and their linear analogs to a streptavidin chip

In our recent report, several HPQ-containing streptavidin ligands were identified from a structurally constrained combinatorial library, and the relative affinities in IC(50) of these tight-binding ligands were revealed by a captured enzyme-linked immunosorbent assay. In the present work, surface plasmon resonance was employed to directly evaluate the binding affinities between immobilized streptavidin and combinatorially selected ligands. The equilibrium dissociation constants and kinetic on/off rates of a previously identified N-to-side chain and newly synthesized N-to-C cyclopeptides were readily deduced using Scatchard analysis and computational simulation. It was found that both cyclopeptides bound streptavidin far more tightly than its linear counterpart ( approximately 1000-fold), while the reversed (QPH) linear and cyclic peptidyl ligands were hardly recognized by streptavidin. Consequently, not only was the binding specificity of synthetic ligands distinguished qualitatively but also the entropic advantage of conformationally constrained cyclopeptides over their linear forms was demonstrated quantitatively by surface plasmon resonance.     

Novel detection system for biomolecules using nano-sized bacterial magnetic particles and magnetic force microscopy

A system for streptavidin detection using biotin conjugated to nano-sized bacterial magnetic particles (BMPs) has been developed. BMPs, isolated from magnetic bacteria, were used as magnetic markers for magnetic force microscopy (MFM) imaging. The magnetic signal was obtained from a single particle using MFM without application of an external magnetic field. The number of biotin conjugated BMPs (biotin-BMPs) bound to streptavidin immobilized on the glass slides increased with streptavidin concentrations up to 100 pg/ml. The minimum streptavidin detection limit using this technique is 1 pg/ml, which is 100 times more sensitive than a conventional fluorescent detection system. This is the first report using single domain nano-sized magnetic particles as magnetic markers for biosensing. This assay system can be used for immunoassay and DNA detection with high sensitivities.     

Characterisation of functional and insecticidal properties of a recombinant cathepsin L-like proteinase from flesh fly (Sarcophaga peregrina), which plays a role in differentiation of imaginal discs

ScathL is a cathepsin L-like cysteine proteinase from Sarcophaga peregrina (flesh fly), which is involved in differentiation of imaginal discs, through proteolysis of components of basement membranes. An expression system based on the methylotrophic yeast Pichia pastoris was used to produce recombinant ScathL. Although the expression construct contained the full proprotein coding sequence for ScathL, the proprotein was only detected in culture supernatant at early stages of expression by Western blotting. The purified recombinant protein contained only a polypeptide similar to mature ScathL, as a result of autocatalytic processing. After activation by reducing agents, the enzyme hydrolysed the cathepsin L substrate Z-Phe-Arg-AMC, with optimal activity at pH 5.5. ScathL showed decreasing activity with increasing ionic strength above 0.3M NaCl, and lost activity irreversibly at pH > or = 7.5. The enzyme showed limited activity towards protein substrates, digesting only to large fragments. ScathL was insecticidal towards larvae of the tomato moth, Lacanobia oleracera, following injection into the haemolymph. It caused melanisation, although no evidence of extensive proteolysis in haemolymph or gut was observed. Production of a inactive mutant form of ScathL showed that enzyme activity was necessary for the complete proprotein processing observed during production as a recombinant protein, and for insecticidal activity.     

Protein engineering of streptavidin for in vivo assembly of streptavidin beads

Escherichia coli was engineered to intracellularly manufacture streptavidin beads. Variants of streptavidin (monomeric, core and mature full length streptavidin) were C-terminally fused to PhaC, the polyester granule forming enzyme of Cupriavidus necator. All streptavidin fusion proteins mediated formation of the respective granules in E. coli and were overproduced at the granule surface. The monomeric streptavidin showed biotin binding (0.7 ng biotin/microg bead protein) only when fused as single-chain dimer. Core streptavidin and the corresponding single-chain dimer mediated a biotin binding of about 3.9 and 1.5 ng biotin/mug bead protein, respectively. However, biotin binding of about 61 ng biotin/mug bead protein with an equilibrium dissociation constant (KD) of about 4 x 10(-8)M was obtained when mature full length streptavidin was used. Beads displaying mature full length streptavidin were characterized in detail using ELISA, competitive ELISA and FACS. Immobilisation of biotinylated enzymes or antibodies to the beads as well as the purification of biotinylated DNA was used to demonstrate the applicability of these novel streptavidin beads. This study proposes a novel method for the cheap and efficient one-step production of versatile streptavidin beads by using engineered E. coli as cell factory.