Effect of Growth Rate on the Synthesis of Penicillin by Penicillium chrysogenum in Batch and Chemostat Cultures

The kinetics of penicillin production by Penicillium chrysogenum Wis 54-1255 in a glucose-limited chemostat and in batch cultures are reported. The specific production rate of penicillin, q_pen (units per milligram of dry weight per hour) was independent of specific growth rate over the range 0.014 to 0.086 hr^-1. Growth was stopped by restricting the glucose supply to the “maintenance ration,” that is, the glucose requirement of the organism at zero growth rate with all other nutrients in excess. Under such conditions, the organism dry weight remained constant, but the q_pen fell approximately linearly to zero at a rate inversely related to the previous growth rate. Glucose supplied in excess of the maintenance ration inhibited the decay of q_pen. At a critical growth rate between 0.009 and 0.014 hr^-1, the decay was completely inhibited. Quantitative expressions for the q_pen of growing and nongrowing cultures were derived and used to predict the steady-state concentrations of penicillin accumulating in one- and two-stage continuous processes. A rational explanation of the kinetics of penicillin accumulation in batch cultures is given, relating the rate of penicillin synthesis to growth rate. It is concluded that an important role of corn steep liquor (CSL), a heterogeneous carbon and nitrogen source commonly used in penicillin production media, is the provision of substrates which allow a high concentration of mold to be reached before the growth rate falls below the critical value. CSL had no significant effect on q_pen.     

Interactions of cell morphology and transport processes in the lovastatin fermentation

The cholesterol lowering drug, Lovastatin (Mevacor), acts as an inhibitor of HMGCoA reductase, and is produced from an Aspergillus terreus fermentation.Pilot scale studies were carried out in 800 liter fermenters to determine the effects of cell morphology on the oxygen transport properties of this fermentation. Specifically, parallel fermentations giving (i) filamentous mycelial cells, and (ii) discrete mycelial pellets, were quantitatively characterized in terms of broth viscosity, availability of dissolved oxygen, oxygen uptake rates and the oxygen transfer coefficient under identical operating conditions.The growth phase of the fermentation, was operated using a cascade control strategy which automatically changed the agitation speed with the goal of maintaining dissolved oxygen at 50% saturation. Subsequently stepwise changes were made in agitation speed and aeration rate to evaluate the response of the mass transfer parameters (DO, OUR, and k _L a). The results of these experiments indicate considerable potential advantages to the pellet morphology from the standpoint of oxygen transport processes.List of Symbols DO % sat. Dissolved oxygen concentration - k _L a h^–1 Gas-liquid mass transfer coefficient - OUR mmol/dm³h Oxygen uptake rate - P/V KW/m³ Agitator power per unit volume - V _s m/s Superficial air velocity - _app cP Apparent viscosity     

Strain selection,medium development and scale-up of toyocamycin production by streptomyces chrestomyceticus

The batch productivity (Q _TM) of the production of the nucleoside antibiotic toyocamycin (TM) by Streptomyces chrestomyceticus was increased ten-fold by selection of a UV generated mutant, optimization of pH, increasing incubation temperature from 28 °C to 36 °C, and addition of soy oil. Initial high oxygen transfer rates stimulated Q _TM maxima two-fold. Antibiotic production by the mutant strain, U190, however, appeared more shear sensitive than the parent culture FCRF 341 with maximum antibiotic titer being inversely related to impellor tip velocity, T _v . For this reason, scale-up could not be done at constant P/V or constant volumetric oxygen transfer. Instead, programming of impeller speed was evaluated in order to maintain optimal impeller tip velocity during scale-up. It was found that a low constant T _v maintained in scale-up in geometrically similar vessels was most beneficial for duplication of optimal antibiotic productivity, Q _TM. Pilot fermentations (120 dm³ scale) were used to determine coefficients of Q _TM variation from oxygen uptake rate (OUR) and total CO₂ evolution data for monitoring of Q _TM variation during scale-up to the 12,000 dm³ scale. This technique allowed for on-line prediction of antibiotic titer and Q _TM from fermentor exhaust gas data.List of Symbols A scale constant - B shape constant - C location of maximum constant - D m impeller diameter (m) - H m liquid height (m) - OTR MmolO₂·(dm³)^–1min^–1 oxygen transfer rate - OUR MmolO₂·(dm³)^–1min^–1 oxygen uptake rate - PCV cm³ packed cell volume - P/V watts/dm³ volumetric power consumption - Q 1 · min^–1 corrected to standard conditions of temperature, pressure aeration rate - Q _TM g/(cm³ · h) or kg/(m³ · h) antibiotic productivity - T m tank diameter - T _mix s mixing time - T _v cm · s^–1 impeller tip velocity - TM g/cm³ Toyocamycin concentration - TNP Tricyclic nucleoside phosphate     

Dependence of penicillium chrysogenum growth, morphology, vacuolation, and productivity in fed-batch fermentations on impeller type and agitation intensity

The influence of the agitation conditions on the growth, morphology, vacuolation, and productivity of Penicillium chrysogenum has been examined in 6 L fed-batch fermentations. A standard Rushton turbine, a four-bladed paddle, and a six-bladed pitched blade impeller were compared. Power inputs per unit volume of liquid, P/VL, ranged from 0.35 to 7.4 kW/m3. The same fermentation protocol was used in each fermentation, including holding the dissolved oxygen concentration above 40% air saturation by gas blending. The mean projected area (for all dispersed types, including clumps) and the clump roughness were used to characterize the morphology. Consideration of clumps was vital as these were the predominant morphological form. For a given impeller, the batch-phase specific growth rates and the overall biomass concentrations increased with agitation intensity. Higher fragmentation at higher speeds was assumed to have promoted growth through increased formation of new growing tips. The mean projected area increased during the rapid growth phase followed by a sharp decrease to a relatively constant value dependent on the agitation conditions. The higher the speed, the lower the projected area for a given impeller type. The proportion by volume of hyphal vacuoles and empty regions decreased with speed, possibly due to fragmentation in the vacuolated regions. The specific penicillin production rate was generally higher with lower impeller speed for a given impeller type. The highest value of penicillin production as well as its rate was obtained using the Rushton turbine impeller at the lowest speed. At given P/VL, changes in morphology, specific growth rate, and specific penicillin production rate depended on impeller geometry. The morphological data could be correlated with either tip speed or the "energy dissipation/circulation function," but a reasonable correlation of the specific growth rate and specific production rate was only possible with the latter. Copyright 1998 John Wiley & Sons, Inc.     

Production of glutamine by micro-gel bead-immobilized Corynebacterium glutamicum 9703-T cells in a stirred tank reactor

The effectiveness of using micro-gel bead-immobilized cells for aerobic processes was investigated. Glutamine production by Corynebacterium glutamicum, 9703-T, cells was used as an example. The cells were immobilized in Sr-alginate micro-gel beads 500 m in diameter and used for fermentation processes in a stirred tank reactor with a modified impeller at 400 min^–1. Continuous production of glutamine was carried out for more than 220 h in this reactor and no gel breakage was observed. As a result of the high oxygen transfer capacity of this system, the glutamine yield from glucose was more than three times higher, while the organic acid accumulation was more than 24 times lower than those obtained with 3.0 mm-gel bead-immobilized cells in an airlift fermentor under similar experimental conditions. During the continuous fermentations there was evolution and proliferation of non-glutamine producing strains which led to a gradual decrease in the productivity of the systems. Although a modified production medium which suppresses cell growth during the production phase was effective in maintaining the productivity, the stability of the whole system was shortened due to high cell deactivation rate in such a medium.List of Symbols C kg/m³ glutamine concentration - C _A mol/m ³ local oxygen concentration inside the gel beads - C _AS mol/m ³ oxygen concentration at the surface of the gel beads - De m²/h effective diffusion coefficient of oxygen in the gel bead - DO mol/m³ dissolved oxygen concentration - F dm³/h medium flow rate - K h^–1 glutamine decomposition rate constant - Km mol/m³ Michaelis Menten constant - QO _2max mol/(kg · h) maximum specific respiration rate - R m radius of the gel beads - r m radial distance - t h time - V _C dm ³ volume of the gel beads - V _L dm ³ liquid volume in the reactor - Vm mol/(m³ · h) maximum respiration rate - X kg/m³ cell concentration - x r/R - y C _A /C_AS - h^–1 cell deactivation rate constant - Thiele modulus defined by R(Vm/De Km) ^1/2 - C _AS /Km - _C kg/(m³-gel · h) specific glutamine formation rate - _c dm³-gel/dm³ V _C /V _L      

Effects of agitation intensity on mycelial morphology and protein production in chemostat cultures of recombinant Aspergillus oryzae

The effects of agitation on fragmentation of a recombinant strain of Aspergillus oryzae and its consequential effects on protein production have been investigated. Constant mass, 5.3-L chemostat cultures at a dilution rate of 0.05 h-1 and a dissolved oxygen level of 75% air saturation, have been conducted at 550, 700, and 1000 rpm. These agitation speeds were chosen to cover a range of specific power inputs (2.2 to 12 kW m-3) from realistic industrial levels to much higher values. The use of a constant mass chemostat linked to a gas blender allowed variation of agitation speed and hence gas hold-up without affecting the dilution rate or the concentration of dissolved oxygen. The morphology of both the freely dispersed mycelia and clumps was characterized using image analysis. Statistical analysis showed that it was possible to obtain steady states with respect to morphology. The mean projected area at each steady state under growing conditions correlated well with the 'energy dissipation/circulation" function, [P/(kD3tc)], where P is the power input, D the impeller diameter, tc the mean circulation time, and k is a geometric constant for a given impeller. Rapid transients of morphological parameters in response to a speed change from 1000 to 550 rpm probably resulted from aggregation. Protein production (alpha-amylase and amyloglucosidase) was found to be independent of agitation speed in the range 550 to 1000 rpm (P/V = 2.2 and 12.6 kW m-3, respectively), although significant changes in mycelial morphology could be measured for similar changes in agitation conditions. This suggests that mycelial morphology does not directly affect protein production (at a constant dilution rate and, therefore, specific growth rate). An understanding of how agitation affects mycelial morphology and productivity would be valuable in optimizing the design and operation of large-scale fungal fermentations for the production of recombinant proteins. Copyright 1999 John Wiley & Sons, Inc.     

Effect of cycling dissolved oxygen concentrations on product formation in penicillin fermentations

Summary Limitations in mass and momentum transfer coupled with high hydrostatic pressures create significant spatial variations in dissolved gas concentrations in large fermenters. Microorganisms are subjected to fluctuating environmental conditions as they pass through the zones in a stirred vessel or along a closed loop fermenter.A 7-litre fermenter was modified to simulate the dissolved gas and hydrostatic pressure gradients in large vessels.The effect of cycling dissolved oxygen tension (DOT) on penicillin production by Penicillium chrysogenum P1 was investigated. The fermentation was affected by evironmental conditions such as medium composition, pH, size of inoculum, stirrer speed and DOT. Inoculum size below 10% (v/v) and stirrer speeds above 850 rpm caused significant reductions in specific prenicillin production rates (q_pen). q_pen values were measured at different constant DOT levels. Below 30% air saturation q_pen decreased sharply and no production was observed at 10%. Penicillin synthesis was impaired irreversibly below 10% DOT. The same profile was observed at higher stirrer speeds and air flow rates indicating that the effect was a physiological one. Oxygen uptake of the culture was affected significantly below 7% DOT, demonstrating that the critical DOT values for penicillin production and oxygen uptake are two distinct parameters. Carrying out the fermentation at one atmosphere over pressure was found to have no effect. When the dissolved oxygen concentration of the culture medium was cycled around the critical DOT for penicillin production, a considerable decrease in the specific penicillin production rate was observed. The effect was reversible but not transient, indicating a shift in cell metabolism.These results demonstrate the unfavourable effect of fluctuating environmental conditions on culture performance in stirred tanks. They suggest that these effects should be accounted for during strain selection, process development and scale up stages of an industrial process if the productivities in small scale vessels are to be obtained.     

In-situ recovery of butanol during fermentation

End-product inhibition in the acetone-butanol fermentation was reduced by using extractive fermentation to continuously remove acetone and butanol from the fermentation broth. In situ removal of inhibitory products from Clostridium acetobutylicum resulted in increased reactor productivity; volumetric butanol productivity increased from 0.58 kg/(m³h) in batch fermentation to 1.5 kg/(m³h) in fed-batch extractive fermentation using oleyl alcohol as the extraction solvent. The use of fed-batch operation allowed glucose solutions of up to 500 kg/m³ to be fermented, resulting in a 3.5- to 5-fold decrease in waste water volume. Butanol reached a concentration of 30–35 kg/m³ in the oleyl alcohol extractant at the end of fermentation, a concentration that is 2–3 times higher than is possible in regular batch or fed-batch fermentation. Butanol productivities and glucose conversions in fed-batch extractive fermentation compare favorable with continuous fermentation and in situ product removal fermentations.List of Symbols C _g kg/m³ concentration of glucose in the feed - C _w dm³/m³ concentration of water in the feed - F(t) cm³/h flowrate of feed to the fermentor at time t - V(t) dm³ broth volume at time t - V _i dm³ initial broth volume - V _si dm³ volume of the i-th aqueous phase sample - effective fraction of water in the feed Part 1. Bioprocess Engineering 2 (1987) 1–12     

The effect of agitation on the morphology and penicillin production of Penicillium chrysogenum

Penicillium chrysogenum strain P1 was grown on complex media in 10 and 100 L agitated fermenters at various aeration rates and stirrer speeds. Samples were removed at intervals for measurements of the culture morphology. At high stirrer speeds (1000 and 1200 rpm) in 10-L fermentations the rate of decrease in the mean effective hyphal length was faster and the rate of penicillin production was lower than fermentations done at 800 rpm. At similar power inputs per unit volume in 100-L fermentations, the change in mean effective hyphal length was less and higher penicillin production rates were observed. This work comparing the results at two scales has shown that neither of the concepts of impeller tip speed or the dissipation rate of turbulence have general validity as a measure of hyphal damage. Our results are reasonaby well correlated by groups similar to circulation rate (ND(i) (3)/V) with lower circulation rates being beneficial. An adaptation of the van Suijdam and Metz relationship, expressed as P/D(i) (3)t(c), was most successful. Our data are insufficient to demonstrate the generality of the relationship but do support the concept of a dispersion zone around the impellers in which mycelia may be damaged. The greater the frequency of circulation of mycelia through the zone the greater the damage and the lower the rate of penicillin synthesis by the culture.     

Biotransformation of cephalosporin C to 7-aminocephalosporanic acid with coimmobilized biocatalyst in a batch bioreactor

The permeabilized cells of Trigonopsis variabilis CCY 15-1-3 having D-amino acid oxidase (DAAO) activity were used to convert cephalosporin C (CPS-C) into 7-(-ketoadipyl amido) cephalosporanic acid (CO-GL-7-ACA) in a batch bioreactor with good aeration and stirring during the process. The deacylation of 7--(4-carboxybutanamido)-cephalosporanic acid (GL-7-ACA) to 7-cephalosporanic acid (7-ACA) by permeabilized cells of Pseudomonas species 3635 having 4--(4-carboxybutamido)-cephalosporanic acid acylase (GL-7-ACA acylase) activity was performed in a batch bioreactor. A spectrophotometric method for the determination of CO-GL-7-ACA and 7-ACA was proposed. Experimental data were fitted by non-linear regression with parameters optimization. The sorption method (without reaction) was applied for the determination of cephalosporin effective diffusion coefficients in Ca-pectate gel beads. These beads were prepared by dropping a potassium pectate gel suspension of inactive permeabilized cells of Trigonopsis variabilis and Pseudomonas species, crosslinked with glutaraldehyde, into a stirred 0.2 M calcium chloride solution. Concentrations of appropriate cephem components were measured by the refractive method. Values of effective diffusion coefficients were calculated by the Fibbonacci optimization method.List of Symbols c _L mol/dm³ concentration on the surface of a bead - c _L0 mol/dm³ initial cephalosporin concentration - c _L mol/dm³ equilibrium cephalosporin concentration in the solution - c _s1 mol/dm³ concentration of CPS-C - c _s2 mol/dm³ concentration of GL-7-ACA - D _ei m²/s effective diffusion coefficient of the components - K _i mol/dm³ inhibition parameter in Eq. (2) - K _{m i} mol/dm³ Michaelis constant in Eq. (1) - K _{m 2} mol/dm³ Michaelis constant in Eq. (2) - n number of beads - q _n nonzero positive roots in Eq. (7) - r ₁ mol/(dm³·s) rate of the conversion of CPS-S to CO-GL-7-ACA - r ₂ mol/(dm³·s) rate of the conversion of GL-7-ACA to 7-ACA - R m radius of the bead - S( ) symbol for total residual sum of squares in Eq. (1) - t s time - V _{m 1} mol/(dm³·s) max. reaction rate in Eq. (1) - V _{m 2} mol/(dm³·s) max. reaction rate in Eq. (2) - V _L dm³ volume of the solution excluding the space occupied by beads - V _s dm³ volume of beads - y _i mol/(dm³ · s) symbol for experimental data in Eq. (1) - _i mol/(dm³· s) symbol for calculated data in Eq. (1) - _P porosity, defined by Eq. (5) - dimensionless parameter, defined by Eq. (6) The authors wish to thank Dr. P. Gemeiner of Slovak Academy of Sciences for rendering of pectate gel. This work is supported by Ministry of Education (Grant No. 1/990 935/93)     

Dependence of morphology on agitation intensity in fed-batch cultures of Aspergillus oryzae and its implications for recombinant protein production

We previously reported that, although agitation conditions strongly affected mycelial morphology, such changes did not lead to different levels of recombinant protein production in chemostat cultures of Aspergillus oryzae (Amanullah et al., 1999). To extend this finding to another set of operating conditions, fed-batch fermentations of A. oryzae were conducted at biomass concentrations up to 34 g dry cell weight/L and three agitation speeds (525, 675, and 825 rpm) to give specific power inputs between 1 and 5 kWm(-3). Gas blending was used to control the dissolved oxygen level at 50% of air saturation except at the lowest speed where it fell below 40% after 60-65 h. The effects of agitation intensity on growth, mycelial morphology, hyphal tip activity, and recombinant protein (amyloglucosidase) production in fed-batch cultures were investigated. In the batch phase of the fermentations, biomass concentration, and AMG secretion increased with increasing agitation intensity. If in a run, dissolved oxygen fell below approximately 40% because of inadequate oxygen transfer associated with enhanced viscosity, AMG production ceased. As with the chemostat cultures, even though mycelial morphology was significantly affected by changes in agitation intensity, enzyme titers (AGU/L) under conditions of substrate limited growth and controlled dissolved oxygen of >50% did not follow these changes. Although the measurement of active tips within mycelial clumps was not considered, a dependency of the specific AMG productivity (AGU/g biomass/h) on the percentage of extending tips was found, suggesting that protein secretion may be a bottle-neck in this strain during fed-batch fermentations.     

Simulation of the dynamics in the Baker's yeast process

Simulation of the dynamics in a fed batch process for production of Baker's yeast is discussed and applied. Experimental evidences are presented for a model of the energy metabolism. The model involves the concept of a maximum respiratory capacity of the cell. If the sugar concentration is increased above a critical value, corresponding to a critical rate of glycolysis and a maximum rate of respiration, then all additional sugar consumed at higher sugar concentrations is converted into ethanol.In a fed batch process with constant sugar feed the sugar concentration declines slowly. If ethanol is present when the sugar concentration declines below the critical value of 110 mg/dm³ fructose +glucose the metabolism switches rapidly into combined oxidation of sugar and ethanol. Thus, no diauxic growth is involved under process conditions. The rate of ethanol consumption is determined by the free capacity of respiration under these conditions. The invertase activity of the cells was found to be so high that mainly fructose and glucose were present in the medium, typically in the concentration range around 100 mg/dm³. These components are consumed at the same rate but with fructose at a higher concentration, indicating a higher K _s for fructose consumption.The model was used in simulation experiments to demonstrate the dynamics of the Baker's yeast process and the influence of different process conditions.List of Symbols DOT % air sat dissolved oxygen tension - F dm³/h rate of inlet medium flow - H kg/(dm³ % air sat.) oxygen solubility - K kg/m³ saturation constant specified by index - K _L a 1/h volumetric oxygen transfer coefficient - m g/(g · h) maintenance coefficient specified by index - P kg/(m³ · h) mean productivity of biomass in the process - q g/(g · h) specific consumption or production rate - S kg/m³ concentration of sugar in reactor - S ₀ kg/m³ concentration of inlet medium sugar medium t h process time - V dm³ medium volume - X kg/m³ concentration of biomass - Y g/g yield coefficient specified by index - 1/h specific growth rate Index aa anaerobic condition - c critical value - e ethanol - ec ethanol consumption - ep ethanol production - max maximum value - o oxygen - oe oxygen for growth on ethanol - os oxygen for growth on sugar - s sugar - x biomass     

Fermentation ofCandida utilis for uricase production

Summary Conditions for the production of microbial uricase byCandida utilis were studied. For the selected strain, hypoxanthine proved to be the most effective inducer of uricase formation. The highest values of biomass as well as uricase activity in the mechanically agitated fermentor were obtained under the following conditions: 50 h, rotation impeller speed 7 s^–1, air flow rate 1.25×10^–5 m³s^–1, concentration of inducer 0.1%.List of symbols b width of baffle, m - c length of baffle, m - D diameter of cylindrical fermentor, m - d diameter of impeller, m - d ₁ diameter of impeller disc, m - Fr _m impeller Froud number - g gravitional acceleration, ms^–2 - H height of batch surface above bottom, m - H ₂ height of impeller disc above bottom, m - h height of impeller blade, m - Kp _g flow rate number - L length of impeller blade, m - N rotational speed of impeller, s^–1 - Re _m impeller Reynolds number - T time, h - V volume of batch, m³ - V _g air (gas) flow rate, m³s^–1 - x mass fraction of the dry matter of cells - x ₀ initial value of the mass fraction of the dry matter of cells - _r volume fraction of the dry matter of cells - <eta<₁ viscosity of pure liquid, Pa s - viscosity of batch (suspension of microbial suspension), Pa s - density of batch, kg m^–3     

Production of <Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine from glycerol by a recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

The production of l-phenylalanine is conventionally carried out by fermentations that use glucose or sucrose as the carbon source. This work reports on the use of glycerol as an inexpensive and abundant sole carbon source for producing l-phenylalanine using the genetically modified bacterium Escherichia coli BL21(DE3). Fermentations were carried out at 37°C, pH 7.4, using a defined medium in a stirred tank bioreactor at various intensities of impeller agitation speeds (300–500 rpm corresponding to 0.97–1.62 m s⁻¹ impeller tip speed) and aeration rates (2–8 L min⁻¹, or 1–4 vvm). This highly aerobic fermentation required a good supply of oxygen, but intense agitation (impeller tip speed ~1.62 m s⁻¹) reduced the biomass and l-phenylalanine productivity, possibly because of shear sensitivity of the recombinant bacterium. Production of l-phenylalanine was apparently strongly associated with growth. Under the best operating conditions (1.30 m s⁻¹ impeller tip speed, 4 vvm aeration rate), the yield of l-phenylalanine on glycerol was 0.58 g g⁻¹, or more than twice the best yield attainable on sucrose (0.25 g g⁻¹). In the best case, the peak concentration of l-phenylalanine was 5.6 g L⁻¹, or comparable to values attained in batch fermentations that use glucose or sucrose. The use of glycerol for the commercial production of l-phenylalanine with E. coli BL21(DE3) has the potential to substantially reduce the cost of production compared to sucrose- and glucose-based fermentations.     

Malate degradation by Schizosaccharomyces yeasts included in alginate beads

Schizosaccharomyces yeasts can be used for deacidification of grape musts. To this aim, we studied malic acid degradation by yeasts included in double layer alginate beads in a bubble column reactor. Use of immobilized micro-organisms allowed a continuous process with high dilution rates giving a deacidification capacity of 0.032 g of malate/hour/dm³/g of beads. The pneumatic agitation was very convenient in this case.List of Symbols D h^–1 Dilution rate for continuous culture - h Residence time for continuous culture - dM/dt kg/(m³ · h) Rate of degradation of malic acid - dS/dt kg/(m³ · h) Rate of consumption of glucose - _max h^–1 Maximal specific rate of growth     

Penicillin acylase production by E. coli

Enzyme production with E. coli ATCC 11105, in a complex medium using phenylacetic acid as inducer is carried out in a stirred-tank reactor of 10 dm³ and an airlift tower-loop reactor of 60 dm³ with outer loop at a temperature of 27 °C. The optimum inducer concentration was 0.8 kg/m³, which was kept constant by fed-batch operation. The optimum of the relative dissolved O₂-concentration with regard to saturation is below 10% in a stirred-tank reactor and at 35% in a tower-loop reactor. It was kept constant by parameter-adaptive control of the aeration rate. In a stirred-tank enzyme productivity is slightly higher than in a tower-loop reactor, and much higher than in a bubble column reactor.List of Symbols CPR kg/(m³ h) CO₂-production rate - OTR kg/(m³ h) O₂-transfer rate - OUR kg/(m³ h) O₂-utilization rate - PAA phenylacetic acid (inducer) - RQ = CPR/OUR respiratory quotient - X kg/m³ cell mass concentration - _m h^–1 maximum specific growth rate     

Critical impeller speed for solid suspension in turbine agitated contactors

The present study in solid-liquid contactors, an attempt has been made to calculate the minimum/critical impeller speed required for complete suspension of solids. A new correlation, involving Reynolds number, modified Froude number, along with the agitation characteristics is proposed. The effect of impeller geometry as well as impeller clearance are clearly established for 6-blade (flat) turbine agitated contactors.List of Symbols B Solid weight fraction (%) - c Clearance of the impeller from the tank bottom (m) - d _P Average particle size(m) - d _R Impeller diameter (m) - d _T Vessel diameter (m) - g Acceleration due to gravity m/sec₂ - N _cs Critical impeller speed (S^–1) Greek Letters Kinematic viscosity m²/sec - _L Density of liquid kg/m³ - _S Density of solid kg/m³ - Density difference between solid and liquid kg/m³     

Integration of continuous production and recovery of solvents from whey permeate: use of immobilized cells of Clostridium acetobutylicum in a flutilized bed reactor coupled with gas stripping

An investigation was performed into the operation of an integrated system for continuous production and product recovery of solvents (acetone-butanol-ethanol) from the ABE fermentation process. Cells of Clostridium acetobutylicum were immobilized by adsorption onto bonechar, and used in a fluidized bed reactor for continuous solvent production from whey permeate. The reactor effluent was stripped of the solvents using nitrogen gas, and was recycled to the reactor. This relieved product inhibition and allowed further sugar utilization. At a dilution rate of 1.37 h^–1 a reactor productivity of 5.1 kg/(m³ · h) was achieved. The solvents in the stripping gas were condensed to give a solution of 53.7 kg/m³. This system has the advantages of relieving product inhibition, and providing a more concentrated solution for recovery by distillation. Residual sugar and non-volatile reaction intermediates are not removed by gas stripping and this contributes to high solvent yields.List of Symbols C kg/m³ Lactose concentration in reactor effluent - C _b kg/m³ Lactose concentration in bleed stream - C _c kg/m³ Lactose concentration in whey permeate feed - C _i kg/m³ Lactose concentration at reactor inlet - C _p kg/m³ Lactose concentration in condensed solvent stream (=0) - C _r kg/m³ Lactose concentration in recycle line (C _b=C _r) - C kg/h Amount of lactose utilized during certain time period - D h¹ Dilution rate of reactor, F _i/D=F/D - F dm³/h, m3/h F _i = Rate of feed flow to the reactor - F _b dm ³/h, m³/h Rate of bleed - F _c dm³/h, m³/h Rate of feed of whey permeate solution - F _p dm³/h, m³/h Rate of concentrated product removal - F _r dm³/h, m³/h Rate of recycle of stripped effluent to the reactor - P _l % Percent lactose utilization - R _l kg/(m³ · h) Overall lactose utilization rate - R _p kg/(m³ · h) Overall reactor (solvent) productivity - R _sl kg/h Rate of solvent loss - S kg/m³ Solvent concentration in reactor effluent - S _b kg/m³ Solvent concentration in bleed - S _c kg/m³ 0; Solvent concentration in concentrated whey permeate solution - S _i kg/m³ Solvent concentration at inlet of reactor - S _p kg/m³ Solvent concentration in concentrated product stream - S _r kg/m³ Solvent concentration in stripped effluent, S _r=S_b - S kg/h Amount of solvent produced from C amount of lactose in a particular time - ds/dt kg/(m³ · h) Rate of accumulation of solvents in the stripper - t h Time - V dm³, m³ Total reactor volume - V ¹ dm³, m³ Liquid volume in stripper - Y _P/S Solvent yield     

Glutamic acid production in an airlift reactor with net draft tube

Cultivation of Brevibacterium divaricatum for glutamic acid production in an airlift reactor with net draft tube was developed. Cell concentration gave an index for adding penicillin G. On-line estimation of total sugar concentration yielded an identified model which was used for determination of the substrate addition. Fermentation for glutamic acid production requires high oxygen concentration in the broth. The proposed reactor has the capability to provide sufficient oxygen for the fermentation. Since the reactor is suitable for fed-batch culture, the cultivation of B. divaricatum for glutamic acid production in the proposed reactor is successfully carried out.List of Symbols a system parameter - b system parameter - C _c,in mole fraction carbon dioxide in the gas inlet - C _c,out mole fraction carbon dioxide in the gas outlet - C _L mole/dm³ oxygen concentration in liquid phase - C _L ^* mole/dm³ saturated oxygen concentration in liquid phase - C _0,in mole fraction of oxygen in the gas inlet - C _0,out mole fraction of oxygen in the gas outlet - CPR mole/h/dm³ carbon dioxide production rate based on total broth - E(t) error signal - F _in mole/h inlet gas flow rate - k ₁ constant defined by Eq. (4) - k ₂ constant defined by Eq. (5) - k _L a 1/h volumetric mass transfer coefficient of gas-liquid phase - OUR mole/h/dm³ oxygen uptake rate based on total broth - P atm pressure in the reactor - t h time - TS _c g total sugar consumption - TS _s g/dm³ set point of total sugar concentration - TS _* g/dm³ reference value of total sugar concentration - TS(t) g/dm³ total sugar concentration in the broth at timet - u(t) cm³/min feed rate at timet - V dm³ total broth volume - VVM (dm³/min)/dm³ flow rate per unit liquid volume - a negative constant defined by Eq. (7)     

Effect of aeration and agitation on the production of mycelial biomass and exopolysaccharides in an enthomopathogenic fungus Paecilomyces sinclairii

AIMS: The objective of the present study was to investigate the influence of aeration rate and agitation intensity on the production of mycelial biomass and exopolysaccharide (EPS) in Paecilomyces sinclairii. METHODS AND RESULTS: The P. sinclairii was cultivated under various aeration and agitation conditions in a 5 l stirred-tank bioreactor. The highest mycelial biomass (30.5 g l-1) and EPS production (11.5 g l-1) were obtained at a high aeration rate (3.5 v.v.m.) and at a high agitation speed (250 rev min-1). The apparent viscosities (6000-8000 cP) of fermentation broth increased rapidly towards the end of fermentations at high aeration and agitation conditions. CONCLUSIONS: The high level of dissolved oxygen achieved at a high aeration rate (3.5 v.v.m.) associated with higher hyphal density eventually resulted in enhanced EPS production. Agitation intensity was also proved to be a critical factor influencing on both the mycelial biomass and EPS production: high agitation speeds up to 250 rev min-1 were preferred to the yields of biomass and EPS production. SIGNIFICANCE AND IMPACT OF THE STUDY: The critical effects of aeration and agitation in the culture process of P. sinclairii were found, which is widely applicable to other kinds of basidiomycetes or ascomycetes in their submerged culture processes.