Lactate production in an integrated process configuration: reducing cell adsorption by shielding of adsorbent

The problem of binding of microbial cells to an adsorbent matrix during in situ recovery of bioproducts from a fermentation broth has been addressed by shielding the adsorbent with a thin layer of a non-ionic polymer. Extractive bioconversion of lactic acid by integrating ion-exchange adsorption with the fermentation stage was studied. The effect of coating of the ion-exchanger with agarose on product recovery and cell adsorption was evaluated. Extractive fermentation with both uncoated and coated resin resulted in an increase in reactor productivity as compared to the normal fermentation. The free cell density in the system with agarose-coated beads was similar to that in control fermentation, but was significantly lower in the system with the uncoated ion-exchanger. Electron microscopic scanning of the bead surface after passage of the fermentation broth showed cells attached to the native adsorbent but not to the coated one.     

Superparamagnetic poly(methyl methacrylate) beads for nattokinase purification from fermentation broth

An effective method for purification of nattokinase from fermentation broth using magnetic poly(methyl methacrylate) (PMMA) beads immobilized with p-aminobenzamidine was proposed in this study. Firstly, magnetic PMMA beads with a narrow size distribution were prepared by spraying suspension polymerization. Then, they were highly functionalized via transesterification reaction with polyethylene glycol. The surface hydroxyl-modified magnetic beads obtained were further modified with chloroethylamine to transfer the surface amino-modified magnetic functional beads. The morphology and surface functionality of the magnetic beads were examined by scanning electron microscopy and Fourier transform infrared. An affinity ligand, p-aminobenzamidine was covalently immobilized to the amino-modified magnetic beads by the glutaraldehyde method for nattokinase purification directly from the fermentation broth. The purification factor and the recovery of the enzyme activity were found to be 8.7 and 85%, respectively. The purification of nattokinase from fermentation broth by magnetic beads only took 40 min, which shows a very fast purification of nattokinase compared to traditional purification methods.     

Extractive fermentation of lactic acid by immobilizedLactobacillus casei using ion—exchange resin

Summary A novel method of lactic acid fermentation byLactobacillus casei immobilized in Ca—alginate gels is described, in which an ion—exchange resin packed column is attached to a fermentor for separation of lactic acid from fermentative broth. The technique successfully alleviated the restriction imposed by lactic acid on bacterial growth and product formation. As compared to the conventional batch fermentation, the new fermentation technique enhanced the lactic acid productivity and sugar conversion rate from 0.328g/L·h and 88. 2% to 0.482g/L·h and 98.6%, respectively.     

Rheological properties of chromosomal and plasmid DNA during alkaline lysis reaction

The experimental apparatus for the simultaneous L-lactic acid fermentation by Rhizopus oryzae immobilized in calcium alginate beads and product separation process was set up in which a three-phase fluidized-bed bioreactor was used as a fermentor and an external electrodialyzer as a separator, and a pump was applied to recycle the fermentation broth between the bioreactor and the separator. The L-lactic acid produced in the fermentor was separated in the separator, product inhibition was alleviated without any addition of alkali or alkali salts and the product purification process could be simplified. The specific productivity and the yield in electrodialysis fermentation (ED-F) process operated in continuous feeding mode were almost the same as that in CaCO₃-buffered fermentation process. A mathematical model of L-lactic acid production in ED-F process was also suggested, in which the model equations for the bioreactor and the electrodialyzer were combined to describe the simultaneous fermentation and product separation. The model predictions were in good agreement with the experimental data.     

Continuous ethanol fermentation using immobilized yeast cells

Growing cells of Saccharomyces cerevisiae immobilized in calcium alginate gel beads were employed in fluidizedbed reactors for continuous ethanol fermentation from cane molasses and other sugar sources. Some improvements were made in order to avoid microbial contamination and keep cell viability for stable long run operations. Notably, entrapment of sterol and unsaturated fatty acid into immobilized gel beads enhanced ethanol productivity more than 50 g ethanol/L gel h and prolonged life stability for more than one-half year. Cell concentration in the carrier was estimated over 250 g dry cell/L gel. A pilot plant with a total column volume of 4 kL was constructed and has been operated since 1982. As a result, it was confirmed that 8-10%(v/v)ethanol-containing broth was continuously produced from nonsterilized diluted cane molasses for over one-half year. The productivity of ethanol was calculated as 0.6 kL ethanol/kL reactor volume day with a 95% conversion yield versus the maximum theoretical yield for the case of 8.5% (v/v) ethanol broth.     

Lactic acid fermentation in a recycle batch reactor using immobilized Lactobacillus casei

Lactic acid production by recycle batch fermentation using immobilized cells of Lactobacillus casei subsp. rhamnosus was studied. The culture medium was composed of whey treated with an endoprotease, and supplemented with 2.5 g/L of yeast extract and 0.18 mM Mn(2+) ions. The fermentation set-up comprised of a column packed with polyethyleneimine-coated foam glass particles, Pora-bact A, and connected with recirculation to a stirred tank reactor vessel for pH control. The immobilization of L. casei was performed simply by circulating the culture medium inoculated with the organism over the beads. At this stage, a long lag period preceded the cell growth and lactic acid production. Subsequently, for recycle batch fermentations using the immobilized cells, the reducing sugar concentration of the medium was increased to 100 g/L by addition of glucose. The lactic acid production started immediately after onset of fermentation and the average reactor productivity during repeated cycles was about 4.3 to 4.6 g/L . h, with complete substrate utilization and more than 90% product yield. Sugar consumption and lactate yield were maintained at the same level with increase in medium volume up to at least 10 times that of the immobilized biocatalyst. The liberation of significant amounts of cells into the medium limited the number of fermentation cycles possible in a recycle batch mode. Use of lower yeast extract concentration reduced the amount of suspended biomass without significant change in productivity, thereby also increasing the number of fermentation cycles, and even maintained the D-lactate amount at low levels. The product was recovered from the clarified and decolorized broth by ion-exchange adsorption. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 55:841-853, 1997.     

Extractive fermentation for butyric acid production from glucose by Clostridium tyrobutyricum

A novel extractive fermentation for butyric acid production from glucose, using immobilized cells of Clostridium tyrobutyricum in a fibrous bed bioreactor, was developed by using 10% (v/v) Alamine 336 in oleyl alcohol as the extractant contained in a hollow-fiber membrane extractor for selective removal of butyric acid from the fermentation broth. The extractant was simultaneously regenerated by stripping with NaOH in a second membrane extractor. The fermentation pH was self-regulated by a balance between acid production and removal by extraction, and was kept at approximately pH 5.5 throughout the study. Compared with conventional fermentation, extractive fermentation resulted in a much higher product concentration (>300 g/L) and product purity (91%). It also resulted in higher reactor productivity (7.37 g/L. h) and butyric acid yield (0.45 g/g). Without on-line extraction to remove the acid products, at the optimal pH of 6.0, the final butyric acid concentration was only approximately 43.4 g/L, butyric acid yield was 0.423 g/g, and reactor productivity was 6.77 g/L. h. These values were much lower at pH 5.5: 20.4 g/L, 0.38 g/g, and 5.11 g/L. h, respectively. The improved performance for extractive fermentation can be attributed to the reduced product inhibition by selective removal of butyric acid from the fermentation broth. The solvent was found to be toxic to free cells in suspension, but not harmful to cells immobilized in the fibrous bed. The process was stable and provided consistent long-term performance for the entire 2-week period of study.     

固定化细胞利用离子交换树脂萃取发酵乳酸的研究

本文提出了利用海藻酸钙凝胶包埋固定化乳酸菌生产乳酸,用离子交换树脂从发酵液中分离出乳酸的新方法。该法成功地消除了产物乳酸对乳酸菌生长和产物乳酸形成的抑制作用,使发酵时间由１２０小时缩短到９６小时,乳酸的体积生产率由０．３２８ｇ／Ｌ·ｈ提高到０．４３２ｇ／Ｌ·ｈ。     

三相流化床中固定化米根霉萃取发酵生产L-乳酸

以TRPO／磺化煤油为萃取剂,在2L三相流床反应器中进行了固定化米根霉原位萃取和异位萃取发酵生产L-乳酸的实验,结果表明,发酵液中的pH值能被控制在3．5左右．产酸速率高达每小时．每1L固定化颗粒产生11gL-乳酸。提出了一个数学模型用以描述萃取发酵中L-乳酸的积累及在各相的分配情况。模型计算曲线与实验值符合良好。     

Repeated fed-batch lactic acid production in a packed bed-stirred fermentor system using a pH feedback feeding method

Lactic acid production by repeated fed-batch fermentation using free and immobilized cells of Lactobacillus lactis-11 in a packed bed-stirred fermentor (PBSF) system filled with different support materials including ceramic beads, macro-activated carbon cylinders and glass fiber balls was investigated. The results showed that the optimal support materials were the ceramic beads with diameters of 1–2 mm. Compared with the free cell fermentation system, lactic acid production and volumetric productivity in the PBSF system increased by 16.6 and 12.5%, respectively. Though the concentration of free cells decreased sharply, lactic acid production remained stable in five consecutive fed-batch runs using the PBSF system. pH gradients, immobilized cell concentration and mass diffusion in the packed bed were all affected by the recirculation rate of the culture broth. Maximum lactic acid production, productivity and yield occurred at a recirculation rate of 50 mL min⁻¹.     

Characterization of product capture resin during microbial cultivations

Various bioactive small molecules produced by microbial cultivation are degraded in the culture broth or may repress the formation of additional product. The inclusion of hydrophobic adsorber resin beads to capture these products in situ and remove them from the culture broth can reduce or prevent this degradation and repression. These product capture beads are often subjected to a dynamic and stressful microenvironment for a long cultivation time, affecting their physical structure and performance. Impact and collision forces can result in the fracturing of these beads into smaller pieces, which are difficult to recover at the end of a cultivation run. Various contaminating compounds may also bind in a non-specific manner to these beads, reducing the binding capacity of the resin for the product of interest (fouling). This study characterizes resin bead binding capacity (to monitor bead fouling), and resin bead volume distributions (to monitor bead fracture) for an XAD-16 adsorber resin used to capture epothilone produced during myxobacterial cultivations. Resin fouling was found to reduce the product binding capacity of the adsorber resin by 25–50%. Additionally, the degree of resin bead fracture was found to be dependent on the cultivation length and the impeller rotation rate. Microbial cultivations and harvesting processes should be designed in such a way to minimize bead fragmentation and fouling during cultivation to maximize the amount of resin and associated product harvested at the end of a run.     

固定化乳酸乳球菌连续生产Nisin的研究

以海藻酸钙为材料 ,固定乳酸乳球菌 (Lactococcuslactissubsp .lactis)SM5 2 6 ,研究不同条件对Nisin合成的影响。结果表明 ,利用 2 %海藻酸钠在 1 0mmol LCaCl2 条件下 ,得到的固定化细胞颗粒稳定性较好 ,可维持 90h无破裂 ;在发酵过程中SYS3培养基中的无机盐成分尤其磷酸盐对固定化颗粒有破坏作用 ;用mSYS3培养基代替SYS3 ,通过 72h三批次循环的半连续培养 ,Nisin活性为 85 0IU mL ,无明显的细胞渗漏现象。连续化生产 70h ,Nisin活性达 1 1 5 0IU mL ,相当于游离细胞的发酵水平。     

In situ separation of lactic acid from fermentation broth using ion exchange resins

Lactic acid fermentation is an end product inhibited reaction. In situ separation of lactic acid from fermentation broth using ion exchange resins was investigated and compared with conventional fermentation system. Amberlite resin (IRA-400, Cl⁻) was used to separate lactic acid from fermentation broth and pH was controlled online with an automatic pH controller. The effect of process variables on lactic acid production by Lactobacillus casei in whey permeate was studied. The maximum productivity was obtained at pH = 6.1, T = 37 °C and impeller speed = 200 rpm. The maximum concentration of lactic acid at optimum condition was found to be 37.4 g/L after 38 h of fermentation using in situ separation system. The productivity of in situ separation system was five times increased in comparison with conventional system.     

Biotechnological production of xylitol in a three-phase fluidized bed bioreactor with immobilized yeast cells in Ca-alginate beads

Cells of Candida guilliermondii entrapped in Ca-alginate beads were used for xylitol production, from concentrated hemicellulose hydrolyzate of sugarcane bagasse, in a fluidized bed bioreactor (FBR). The maximum xylitol concentration 28.9 g xylitol/L was obtained at a high aeration rate of 600 mL/min after 70 h of fermentation, indicating that the use of high aeration rate in this system is favored for better oxygen transfer into the immobilized cells. The specific xylitol productivity and the xylitol yield were of 0.4 g xylitol/L.h and 0.58 g xylitol/g xylose respectively. The immobilization efficiency at the end of the fermentation was of 65 %. After 90 h of fermentation xylitol productivity and yield decreased to 0.25 g xylitol/L.h and 0.47 g xylitol/g xylose respectively, indicating the beginning of xylitol consumption by the yeast. The use of FBR system with immobilized cells presented high xylitol yield and productivity.     

Fermentative lactic acid production with a metabolically engineered yeast immobilized in photo-crosslinkable resins

In this study, the immobilization technique involving photo-crosslinkable resin gels was used for lactic acid production. Saccharomyces cerevisiae OC-2T T165R, a metabolically engineered yeast that produces optically pure l(+)-lactic acid, was immobilized in hydrophilic photo-crosslinked resin gels as a biocatalyst. Three resin gels, TEP 1, TEP 2 and TEP 3, were examined and all of them showed high performance as to lactic acid production. Resin gel TEP 1, which exhibited the highest productivity among the resin gels was used for 15 consecutive batch fermentations without decreases in productivity and mechanical deformation, indicating that it was a suitable carrier for long-term lactic acid fermentation. Moreover, the use of the immobilization technique can improve the productivity of the metabolically engineered yeast in the fermentation with or without extraction, showing promise for using the immobilized engineered yeast for lactic acid production.     

In situ extractive fermentation of acetone and butanol

The productivity of the acetone-butanol fermentation was increased by continuously removing acetone and butanol from the fermentation broth during fed-batch culture. Whole broth containing viable cells of Clostridium acetobutylicum was cycled to a Karr reciprocating plate extraction column in which acetone and butanol were extracted into oleyl alcohol flowing counter-currently through the column. By continuously removing these toxic metabolites from the broth, end product inhibition was reduced, and a concentrated feed solution containing 300 g/L glucose was fermented at an overall butanol productivity of 1.0 g/L h, 70% higher than the productivity of normal batch fermentation. The continuous extraction process provides flexible operation and lends itself to process scale-up.     

固定化芽孢菌产碱性蛋白酶的研究

本文报导了用海藻酸钙固定地衣芽孢杆菌(Bacilluslicheniformis),发酵生产碱性蛋白酶的研究。固定化细胞颗粒在低浓度的玉米粉、黄豆饼粉为原料的培养基中发酵24h,酶活高达1724u/ml,充分利用并节省了原材料,缩短了发酵周期。发酵液菌浓度的测定结果表明,固定化细胞凝胶粒细菌的渗漏程度较低,有利于提取工艺的简化。     

Ethanol fermentation in a yeast immobilized tubular fermentor

In this article, a mathematical model describing the kinetics of ethanol fermentation in a whole cell immobilized tubular fermentor is proposed. Experimental results show reasonable agreement with the proposed model. A procedure for treating the fermentation data for determining the ethanol inhibition constants k(1) and k(2) is described. The ethanol productivity of the immobilized cell fermentor is compared with those of traditional fermentors. Experimental studies indicate that with Saccharomyces cerevisiae (NRRL Y132) culture, ethanol productivity in the range 21.2-83.7 g ethanol L(-1) h(-1) at ethanol concentration of 76-60 g/L can be achieved. This is comparable to or higher than those reported in the literature for yeast. The product yield factor of 0.5 g ethanol/g glucose was obtained. The immobilized cell fermentor does not show washout at dilution rates of 7 h(-1) and shows good stability over a 650-h operating period.     

Immobilization of Bacillus amyloliquefaciens MBL27 cells for enhanced antimicrobial protein production using calcium alginate beads

Cell immobilization is one of the common techniques for increasing the overall cell concentration and productivity. Bacillus amyloliquefaciens MBL27 cells were immobilized in calcium alginate beads and it is a promising method for repeated AMP (antimicrobial protein) production. The present study aimed at determining the optimal conditions for immobilization of B. amyloliquefaciens MBL27 cells in calcium alginate beads and the operational stability for enhanced production of the AMP. AMP production with free and immobilized cells was also done. In batch fermentation, maximum AMP production (7300 AU (arbitrary units)/ml against Staphylococcus aureus) was obtained with immobilized cells in shake flasks under optimized parameters such as 3% (w/v) sodium alginate, 136?mM CaCl2 with 350 alginate beads/flask of 2.7-3.0?mm diameter. In repeated cultivation, the highest activity was obtained after the second cycle of use and approx. 94% production was noted up to the fifth cycle. The immobilized cells of B. amyloliquefaciens MBL27 in alginate beads are more efficient for the production of AMP and had good stability. The potential application of AMP as a wound healant and the need for development of economical methods for improved production make whole cell immobilization an excellent alternative method for enhanced AMP production.     

Continuous butanol/isopropanol fermentation in down-flow column reactor coupled with pervaporation using supported liquid membrane

Continuous butanol/isopropanol fermentation with immobilized Clostridium isopropylicum was performed in a downflow column reactor using molasses as the substrate. In order to prevent product inhibition and at the same time obtain high concentration of the products, the column reactor was coupled with a pervaporation module using a supported liquid membrane. The liquid membrane was prepared with oleyl alcohol nontoxic to the microorganism. In comparison with the continuous fermentation without product removal, the specific butanol production rate was 2 times higher. The butanol concentration in the permeate was 230 kg/m(3), which was about 50 times higher than that in the culture broth. A numerical investigation suggested a further increase in the productivity by improving the module construction.