Importance of the C terminus of plasmid Rts1 RepA protein for replication and incompatibility of the plasmid.

RepA protein, essential for replication of plasmid Rts1, was found to bind in vivo immediately upstream of the repA promoter in studies with mini-Rts1 derivatives with deletions in the upstream region of repA. We constructed another series of repA mutants that would encode RepA derivatives containing oligopeptide substitutions in place of the carboxyl-terminal six amino acids. These modified RepA proteins could not activate ori (Rts1) at all and showed various degrees of incompatibility, or no incompatibility, toward a mini-Rts1 plasmid. These results suggest that the carboxyl-terminal six (or fewer) amino acids of RepA are important for exerting replication and incompatibility functions. One of the RepA derivatives, which showed an evident incompatibility without initiating replication, was examined for its ability to repress the repA gene.     

Site-directed mutations in the repA C-terminal region of plasmid Rts1: pleiotropic effects on the replication and autorepressor functions.

We induced site-directed mutations near the 3' terminus of the gene repA, which encodes the protein of 288 amino acid residues essential for plasmid Rts1 replication, and obtained seven repA mutants. Three of them contained small deletions at the 3' terminus. Mutant repAz delta C4, which encodes a RepA protein that lacks the C-terminal four amino acids, expressed a high-copy-number phenotype and had lost both autorepressor and incompatibility functions. Deletion of one additional amino acid residue to form the RepAz delta C5 protein caused restoration of the wild-type copy number and strong incompatibility. Studies of the remaining four repA mutants, each of which contained a single amino acid substitution near the RepA C terminus, suggested that Lys-268 is involved in both ori(Rts1) activation and autorepressor-incompatibility activities and that Arg-279 contributes to ori(Rts1) activation but not to incompatibility. Lys-268 is part of a dual-lysine sequence with Lys-267 and is located 21 amino acids upstream of the RepA C terminus. A dual-lysine sequence is also found at a similar position in both mini-F RepE and mini-P1 RepA proteins.     

Effects of mutations in the repA gene of plasmid Rts1 on plasmid replication and autorepressor function.

We constructed a system in which wild-type RepA or RepAcop1 protein was supplied in trans in various amounts to coexisting mini-Rts1 plasmids by clones of the repA or repAcop1 gene under the control of the native promoter with or without its operator sequence. RepAcop1 protein which contains a single amino acid substitution (Arg-142 to Lys) within its 288 amino acids could initiate the replication of the mini-Rts1 plasmid efficiently at both 37 and 42 degrees C even if it was supplied in excess. In contrast, excess wild-type RepA inhibited plasmid replication at 37 degrees C but supported replication at 42 degrees C. Therefore, it appears that the initiator activity of RepA is not related to the incompatibility phenotype associated with an excess of RepA protein. An immunoblot analysis revealed that neither RepA nor RepAcop1 synthesis was temperature sensitive and that both were autogenously regulated to a similar extent because of the presence of an operator located immediately upstream of the promoter. Two mutant RepA proteins, each of which contains a 4-amino-acid insertion in the middle of the protein, maintained the autorepressor and incompatibility activities but lost the ori(Rts1)-activating function.     

Analysis of functional domains of Rts1 RepA by means of a series of hybrid proteins with P1 RepA.

The RepA protein of the plasmid Rts1, consisting of 288 amino acids, is a trans-acting protein essential for initiation of plasmid replication. To study the functional domains of RepA, hybrid proteins of Rts1 RepA with the RepA initiator protein of plasmid P1 were constructed such that the N-terminal portion was from Rts1 RepA and the C-terminal portion was from P1 RepA. Six hybrid proteins were examined for function. The N-terminal region of Rts1 RepA between amino acid residues 113 and 129 was found to be important for Rts1 ori binding in vitro. For activation of the origin in vivo, an Rts1 RepA subregion between residues 177 and 206 as well as the DNA binding domain was required. None of the hybrid initiator proteins activated the P1 origin. Both in vivo and in vitro studies showed, in addition, that a C-terminal portion of Rts1 RepA was required along with the DNA binding and ori activating domains to achieve autorepression, suggesting that the C-terminal region of Rts1 RepA is involved in dimer formation. A hybrid protein consisting of the N-terminal 145 amino acids of Rts1 and the C-terminal 142 amino acids from P1 showed strong interference with both Rts1 and P1 replication, whereas other hybrid proteins showed no or little effect on P1 replication.     

Essential DNA sequence for the replication of Rts1.

The promoter sequence of the mini-Rts1 repA gene encoding the 33,000-dalton RepA protein that is essential for replication was defined by RNA polymerase protection experiments and by analyzing RepA protein synthesized in maxicells harboring mini-Rts1 derivatives deleted upstream of or within the presumptive promoter region. The -10 region of the promoter which shows homology to the incII repeat sequences overlaps two inverted repeats. One of the repeats forms a pair with a sequence in the -35 region, and the other forms a pair with the translation initiation region. The replication origin region, ori(Rts1), which was determined by supplying RepA protein in trans, was localized within 188 base pairs in a region containing three incII repeats and four GATC sequences. Dyad dnaA boxes that exist upstream from the GATC sequences appeared to be dispensable for the origin function, but deletion of both dnaA boxes from ori(Rts1) resulted in reduced replication frequency, suggesting that host-encoded DnaA protein is involved in the replication of Rts1 as a stimulatory element. Combination of the minimal repA and ori(Rts1) segments, even in the reverse orientation compared with the natural sequence, resulted in reconstitution of an autonomously replicating molecule.     

Functional analysis of ori1 and repA of the R-plasmid pSJ5.6 from Neisseria gonorrhoeae

The functional ori1 of the 5.6kb gonococcal R-plasmid pSJ5.6 contains an A-T rich region followed by four 22bp direct repeats and one 19bp inverted repeat. The replication region of the plasmid also contains a gene encoding for a 39kD RepA protein. We have further assessed the functionality of the replication region in pSJ5.6, an-iteron type plasmid, using in vivo complementation assays in Escherichia coli. A 2.1kb PstI-RsaI fragment containing the ori1 and repA gene of pSJ5.6 was cloned into vector pZErO -2 to obtain pZA-MRR. The pUC origin in pZA-MRR was deleted to render the plasmid dependable on the cis-acting ori1 for replication. The resulting plasmid, pMRR, was capable of replication and maintenance in E. coli. We also cloned the ori1 and repA gene separately to obtain pA-Ori and pZG-Rep, respectively. Using in vivo complementation assays, we demonstrated that the ori1(+) plasmid (pA-Ori) was maintained only when the RepA protein was supplied in trans by the high copy number plasmid pZG-Rep.     

Purification of Rts1 RepA protein and binding of the protein to mini-Rts1 DNA.

RepA protein, essential for the replication of plasmid Rts1, was purified, and its binding to mini-Rts1 subregions was examined by a DNase I protection assay. RepA protected the incI and incII iterons, a region immediately upstream of the repA promoter, and a 10-base-pair region located between the most external incII iteron and a GATC box. The protection was less efficient when preheated RepA was used.     

Rifampicin-induced replication of the plasmid pBR322 in Escherichia coli strains carrying dnaA mutations

The replication pattern of the plasmid pBR322 was examined in the dnaA mutants of Escherichia coli. The rate of pBR322 DNA synthesis is markedly decreased after dnaA cells are shifted to the restrictive temperature of 42 degrees C. However, addition of rifampicin (RIF) to cultures of dnaA strains incubated at 42 degrees C after a lag of 90 min results in a burst of pBR322 synthesis. This RIF-induced pBR322 replication remains dependent on DNA polymerase I activity. Efficient plasmid pBR322 replication is observed at 42 degrees C in the double mutant dnaA46cos bearing an intragenic suppressor of dnaA46. Though replication of pBR322 in dnaA46cos growing at 42 degrees C is initially sensitive to RIF plasmid synthesis is restored after 90 min incubation in the presence of the drug. RIF-induced replication of the plasmid pBR327, lacking the rriB site implicated in RIF-resistant synthesis of the L strand of ColE1-like plasmids (Nomura and Ray 1981; Zipursky and Marians 1981), was observed also in dnaA46 at 42 degrees C.     

Cloning of the replication and incompatibility regions of a plasmid derived from Rts1

A replication region, consisting of a 1.1-megadalton (Md) EcoRI/HindIII fragment, was isolated from an Rts1 derivative plasmid. This 1.1-Md fragment, designated as mini-Rts1, was ligated to either pBR322 or a nonreplicating DNA fragment specifying a drug resistance, and its replication properties were investigated. The mini-Rts1 plasmid was cured at a high frequency at 42 °C, while it was maintained stably at 37 °C despite it existed in low copy number. These behaviors are quite similar to those of Rts1. By dissecting the pBR322:mini-Rts1 chimeric plasmid with AccI endonuclease, an inc region of 0.34 Md in size was cloned, which expressed incompatibility toward Rts1. Proteins encoded on the mini-Rts1 genome were examined in the minicell system, and one specific product of 35,000 daltons in molecular weight was identified. Any polypeptides specific for the 0.34-Md inc⁺ region within mini-Rts1 were not detected.     

DNA bending near the replication origin of IncFII plasmid NR1.

The DNA replication origin of plasmid NR1 is located approximately 190 base pairs downstream from the 3' end of the repA1 gene, which encodes the essential initiation protein for replication of the plasmid. Restriction endonuclease fragments that contain the NR1 replication origin and its flanking sequences at circularly permuted positions were obtained by digesting oligomers of ori-containing DNA fragments with sets of enzymes that each cut only once in every ori fragment. Polyacrylamide gel electrophoresis of these permuted restriction fragments showed anomalous mobilities, indicating the presence of a DNA bending locus. Through analysis of the relative mobility plots of these permuted fragments, we found one or two possible DNA bending sites located in the intervening region between the repA1 gene and the replication origin of NR1. It seems possible that DNA bending in this region might help to orient the replication origin alongside the repA1 gene, which could contribute to the cis-acting character of the RepA1 initiation protein.     

Induced bending of plasmid pLS1 DNA by the plasmid-encoded protein RepA

The broad host range streptococcal plasmid pLS1 encodes for a 5.1-kDa repressor protein, RepA. This protein has affinity for DNA (linear or supercoiled) and is translated from the same mRNA as the replication initiator protein RepB. By gel retardation assays, we observed that RepA shows specificity for binding to the plasmid HinfID fragment, which includes the target of the protein. The target of RepA within the plasmid DNA molecule has been located around the plasmid single site ApaLI. This site is included in a region that contains the promoter for the repA and repB genes and is contiguous to the plasmid ori(+). A complex sequence-directed DNA curvature is observed in this region of pLS1. Upon addition of RepA to plasmid linear DNA or to circularly permuted restriction fragments, this intrinsic curvature was greatly enhanced. Thus, a strong RepA-induced bending could be located in the vicinity of the ApaLI site. Visualization of the bent DNA was achieved by electron microscopy of complexes between RepA and plasmid DNA fragments containing the RepA target.     

Nucleotide sequence, structural organization, and functional characterization of the small recombinant plasmid pOM1 that is specific for Francisella tularensis

pOM1 is a recombinant 4442-bp plasmid that includes the replicon of the Francisella novicida-like strain F6168 cryptic plasmid pFNL10 and the tetracycline resistance gene (tetC) of plasmid pBR328. pOM1 can stably replicate and is maintained in Francisella tularensis biovars tularensis, palaearctica, and palaearctica var. japonica. The replicon of pOM1 includes the ori region and the repA gene. The ori region, located upstream of the repA gene includes two sets of 31- and 13-bp direct repeats (DR), with AT-rich regions preceding each of the DRs. Two putative promoters of the repA gene were found connected with the DR regions. A 40-kDa protein was encoded by the repA gene and found essential for replication. Expression of the tetC gene is regulated by an Escherichia coli sigma(70)-like promoter and is dependent on the F. tularensis strain and its environment.     

Excess intracellular concentration of the pSC101 RepA protein interferes with both plasmid DNA replication and partitioning.

RepA, a plasmid-encoded gene product required for pSC101 replication in Escherichia coli, is shown here to inhibit the replication of pSC101 in vivo when overproduced 4- to 20-fold in trans. Unlike plasmids whose replication is prevented by mutations in the repA gene, plasmids prevented from replicating by overproduction of the RepA protein were lost rapidly from the cell population instead of being partitioned evenly between daughter cells. Removal of the partition (par) locus increased the inhibitory effect of excess RepA on replication, while host and plasmid mutations that compensate for the absence of par, or overproduction of the E. coli DnaA protein, diminished it. A repA mutation (repA46) that elevates pSC101 copy number almost entirely eliminated the inhibitory effect of RepA at high concentration and stimulated replication when the protein was moderately overproduced. As the RepA protein can exist in both monomer and dimer forms, we suggest that overproduction promotes RepA dimerization, reducing the formation of replication initiation complexes that require the RepA monomer and DnaA; we propose that the repA46 mutation alters the ability of the mutant protein to dimerize. Our discovery that an elevated intracellular concentration of RepA specifically impedes plasmid partitioning implies that the RepA-containing complexes initiating pSC101 DNA replication participate also in the distribution of plasmids at cell division.     

Replication of Enterococcus faecalis pheromone-responding plasmid pAD1: location of the minimal replicon and oriV site and RepA involvement in initiation of replication

The hemolysin-determining plasmid pAD1 is a member of a widely disseminated family of highly conjugative elements commonly present in clinical isolates of Enterococcus faecalis. The determinants repA, repB, and repC, as well as adjacent iteron sequences, are believed to play important roles in pAD1 replication and maintenance. The repA gene encodes an initiator protein, whereas repB and repC encode proteins related to stability and copy number. The present study focuses specifically on repA and identifies a replication origin (oriV) within a central region of the repA determinant. A small segment of repA carrying oriV was able to support replication in cis of a plasmid vector otherwise unable to replicate, if an intact RepA was supplied in trans. We demonstrate that under conditions in which RepA is expressed from an artificial promoter, a segment of DNA carrying only repA is sufficient for stable replication in E. faecalis. We also show that RepA binds specifically to oriV DNA at several sites containing inverted repeat sequences (i.e., IR-1) and nonspecifically to single-stranded DNA, and related genetic analyses confirm that these sequences play an important role in replication. Finally, we reveal a relationship between the internal structure of RepA and its ability to recognize oriV. An in-frame deletion within repA resulting in loss of 105 nucleotides, including at least part of oriV, did not eliminate the ability of the altered RepA protein to initiate replication using an intact origin provided in trans. The relationship of RepA to other known initiator proteins is also discussed.