Combined participation of hydroxylase active site residues and effector protein binding in a para to ortho modulation of toluene 4-monooxygenase regiospecificity

Toluene 4-monooxygenase (T4MO) is a diiron hydroxylase that exhibits high regiospecificity for para hydroxylation. This fidelity provides the basis for an assessment of the interplay between active site residues and protein complex formation in producing an essential biological outcome. The function of the T4MO catalytic complex (hydroxylase, T4moH, and effector protein T4moD) is evaluated with respect to effector protein concentration, the presence of T4MO electron-transfer components (Rieske ferredoxin, T4moC, and NADH oxidoreductase), and use of mutated T4moH isoforms with different hydroxylation regiospecificities. Steady-state kinetic analyses indicate that T4moC and T4moD form complexes of similar affinity with T4moH. At low T4moD concentrations, the steady-state hydroxylation rate is linearly dependent on T4moD-T4moH complex formation, whereas regiospecificity and the coupling efficiency between NADH consumption and hydroxylation are associated with intrinsic properties of the T4moD-T4moH complex. The optimized complex gives both efficient coupling and high regiospecificity with p-cresol representing >96% of total products from toluene. Similar coupling and regiospecificity for para hydroxylation are obtained with T3buV (an effector protein from a toluene 3-monooxygenase), demonstrating that effector protein binding does not uniquely determine or alter the regiospecificity of toluene hydroxylation. The omission of T4moD causes an approximately 20-fold decrease in hydroxylation rate, nearly complete uncoupling, and a decrease in regiospecificity so that p-cresol represents approximately 60% of total products. Similar shifts in regiospecificity are observed in oxidations of alternative substrates in the absence or upon the partial removal of either T4moD or T3buV from toluene oxidations. The mutated T4moH isoforms studied have apparent V(max)/K(M) specificities differing by approximately 2-4-fold and coupling efficiencies ranging from 88% to 95%, indicating comparable catalytic function, but also exhibit unique regiospecificity patterns for all substrates tested, suggesting unique substrate binding preferences within the active site. The G103L isoform has enhanced selectivity for ortho hydroxylation with all substrates tested except nitrobenzene, which gives only m-nitrophenol. The regiospecificity of the G103L isoform is comparable to that observed from naturally occurring variants of the toluene/benzene/o-xylene monooxygenase subfamily. Evolutionary and mechanistic implications of these findings are considered.     

Remarkable aliphatic hydroxylation by the diiron enzyme toluene 4-monooxygenase in reactions with radical or cation diagnostic probes norcarane, 1,1-dimethylcyclopropane, and 1,1-diethylcyclopropane

Toluene 4-monooxygenase (T4MO) catalyzes the hydroxylation of toluene to yield 96% p-cresol. This diiron enzyme complex was used to oxidize norcarane (bicyclo[4.1.0]heptane), 1,1-dimethylcyclopropane, and 1,1-diethylcyclopropane, substrate analogues that can undergo diagnostic reactions upon the production of transient radical or cationic intermediates. Norcarane closely matches the shape and volume of the natural substrate toluene. Reaction of isoforms of the hydroxylase component of T4MO (T4moH) with different regiospecificities for toluene hydroxylation (k(cat) approximately 1.9-2.3 s(-)(1) and coupling efficiency approximately 81-96%) revealed similar catalytic parameters for norcarane oxidation (k(cat) approximately 0.3-0.5 s(-)(1) and coupling efficiency approximately 72%). The products included variable amounts of the un-rearranged isomeric norcaranols and cyclohex-2-enyl methanol, a product attributed to rearrangement of a radical oxidation intermediate. A ring-expansion product derived from the norcaranyl C-2 cation, cyclohept-3-enol, was not produced by either the natural enzyme or any of the T4moH isoforms tested. Comparative studies of 1,1-dimethylcyclopropane and 1,1-diethylcyclopropane, diagnostic substrates with differences in size and with approximately 50-fold slower k(cat) values, gave products consistent with both radical rearrangement and cation ring expansion. Examination of the isotopic enrichment of the incorporated O-atoms for all products revealed high-fidelity incorporation of an O-atom from O(2) in the un-rearranged and radical-rearranged products, while the O-atom found in the cation ring-expansion products was predominantly obtained by reaction with H(2)O. The results show a divergence of radical and cation pathways for T4moH-mediated hydroxylation that can be dissected by diagnostic substrate probe rearrangements and by changes in the source of oxygen used for substrate oxygenation.     

Crystal structures and functional studies of T4moD, the toluene 4-monooxygenase catalytic effector protein

Toluene 4-monooxygenase (T4MO) is a four-component complex that catalyzes the regiospecific, NADH-dependent hydroxylation of toluene to yield p-cresol. The catalytic effector (T4moD) of this complex is a 102-residue protein devoid of metals or organic cofactors. It forms a complex with the diiron hydroxylase component (T4moH) that influences both the kinetics and regiospecificity of catalysis. Here, we report crystal structures for native T4moD and two engineered variants with either four (DeltaN4-) or 10 (DeltaN10-) residues removed from the N-terminal at 2.1-, 1.7-, and 1.9-A resolution, respectively. The crystal structures have C-alpha root-mean-squared differences of less than 0.8 A for the central core consisting of residues 11-98, showing that alterations of the N-terminal have little influence on the folded core of the protein. The central core has the same fold topology as observed in the NMR structures of T4moD, the methane monooxygenase effector protein (MmoB) from two methanotrophs, and the phenol hydroxylase effector protein (DmpM). However, the root-mean-squared differences between comparable C-alpha positions in the X-ray structures and the NMR structures vary from approximately 1.8 A to greater than 6 A. The X-ray structures exhibit an estimated overall coordinate error from 0.095 (0.094) A based on the R-value (R free) for the highest resolution DeltaN4-T4moD structure to 0.211 (0.196) A for the native T4moD structure. Catalytic studies of the DeltaN4-, DeltaN7-, and DeltaN10- variants of T4moD show statistically insignificant changes in k(cat), K(M), k(cat)/K(M), and K(I) relative to the native protein. Moreover, there was no significant change in the regiospecificity of toluene oxidation with any of the T4moD variants. The relative insensitivity to changes in the N-terminal region distinguishes T4moD from the MmoB homologues, which each require the approximately 33 residue N-terminal region for catalytic activity.     

Protein engineering of toluene-o-xylene monooxygenase from Pseudomonas stutzeri OX1 for oxidizing nitrobenzene to 3-nitrocatechol, 4-nitrocatechol, and nitrohydroquinone

Toluene-o-xylene monooxygenase (ToMO) from Pseudomonas stutzeri OX1 was found to oxidize nitrobenzene (NB) to form m-nitrophenol (m-NP, 72%) and p-NP (28%) with an initial rate of 0.098 and 0.031 nmol/(min mg protein), respectively. It was also discovered that wild-type ToMO forms 4-nitrocatechol (4-NC) from m-NP and p-NP with an initial rate of 0.15 and 0.0082 nmol/(min mg protein), respectively, and 3-NC (12%) and nitrohydroquinone (NHQ, 88%) from o-NP with an initial rate of 0.11 and 0.8 nmol/(min mg protein), respectively. To increase the oxidation rate and alter the oxidation regiospecificity of nitro aromatics as well as to study the role of the active site residues I100, Q141, T201, and F205 of the alpha hydroxylase fragment of ToMO (TouA), DNA shuffling and saturation mutagenesis were used to generate random mutants. The mutants were initially identified by screening via a rapid agar plate assay and then were further examined by high-performance liquid chromatography (HPLC) and gas chromatography (GC). Several mutants with higher rates of activities and with different regiospecificities were identified; for example, Escherichia coli TG1 cells expressing either TouA mutant M180T/E284G or E214G/D312N/M399V produce 4-NC 4.5- and 20-fold faster than wild-type ToMO (0.037 and 0.16 nmol/min mg protein from p-NP, respectively). TouA mutant A107T/E214A had the regiospecificity of NB changed significantly from 28% to 79% p-NP. From 200 microM NB, TouA variants A101T/M114T, A110T/E392D, M180T/E284G, and E214G/D312N/M399V produce 4-NC whereas wild-type ToMO does not. From m-NP, TouA mutant I100Q produces 4-NC (37%) and NHQ (63%), whereas wild-type ToMO produces only 4-NC (100%). Variant A107T/E214A acts like a para enzyme and forms p-cresol as the major product (93%) from toluene with enhanced activity (2.3-fold), whereas wild-type ToMO forms 32%, 21%, and 47% of o-, m-, and p-cresol, respectively. Hence, the non-specific ToMO was converted into a regiospecific enzyme, which rivals toluene 4-monooxygenase of P. mendocina KR1 and toluene o-monooxygenase of Burkholderia cepacia G4 in its specificity.     

Redox and functional analysis of the Rieske ferredoxin component of the toluene 4-monooxygenase

Toluene 4-monooxygenase catalyzes the NADH- and O2-dependent hydroxylation of toluene to form p-cresol. The four-protein complex consists of a diiron hydroxylase, an oxidoreductase, a catalytic effector protein, and a Rieske-type ferredoxin (T4moC). Phylogenetic analysis suggests that T4moC is part of a clade specialized for reaction with diiron hydroxylases, possibly reflected in the conservation of W69, whose indole side chain makes close contacts with a bridging sulfide. In order to further investigate the possible origins of this specialization, T4moC, mutated variants of T4moC, and three other purified ferredoxins (the Thermus Rieske protein, the Burkholderia cepacia Rieske-type biphenyl dioxygenase ferredoxin BphF, and the Ralstonia pickettii PK01 toluene monooxygenase TbuB, the Rieske-type ferredoxin from another diiron monooxygenase complex) were studied by redox potential measurements and their ability to complement the catalytic function of the reconstituted toluene 4-monooxygenase complex. A saturation mutagenesis of T4moC W69 indicates that an aromatic residue may modulate the redox potential and is also necessary for activity and/or stability. The redox potential of T4moC was determined to be -173 mV, W69F T4moC was -139 mV, and TbuB was -150 mV. For comparison, BphF had a redox potential of -157 mV [Couture et al. (2001) Biochemistry 40, 84-92]. Of these ferredoxins, all except BphF were able to provide catalytic activity. Given the range in redox potentials observed in the active ferredoxins, shape and electrostatics are strongly implicated in the catalytic specialization. Mutagenesis of other T4moC surface residues gave further insight into possible origins of catalytic specialization. Thus R65A T4moC gave an alteration in apparent KM only, while D82A/D83A T4moC gave alterations in both apparent kcat and KM. Since the different catalytic results were obtained by mutagenesis of residues lying on different sides of the protein adjacent to the [2Fe-2S] cluster, the results suggest that two different faces of T4moC may be involved in protein-protein interactions during catalysis.     

Protein engineering of toluene 4-monooxygenase of Pseudomonas mendocina KR1 for synthesizing 4-nitrocatechol from nitrobenzene

After discovering that toluene 4-monooxygenase (T4MO) of Pseudomonas mendocina KR1 oxidizes nitrobenzene to 4-nitrocatechol, albeit at a very low rate, this reaction was improved using directed evolution and saturation mutagenesis. Screening 550 colonies from a random mutagenesis library generated by error-prone PCR of tmoAB using Escherichia coli TG1/pBS(Kan)T4MO on agar plates containing nitrobenzene led to the discovery of nitrocatechol-producing mutants. One mutant, NB1, contained six amino acid substitutions (TmoA Y22N, I84Y, S95T, I100S, S400C; TmoB D79N). It was believed that position I100 of the alpha subunit of the hydroxylase (TmoA) is the most significant for the change in substrate reactivity due to previous results in our lab with a similar enzyme, toluene ortho-monooxygenase of Burkholderia cepacia G4. Saturation mutagenesis at this position resulted in the generation of two more nitrocatechol mutants, I100A and I100S; the rate of 4-nitrocatechol formation by I100A was more than 16 times higher than that of wild-type T4MO at 200 microM nitrobenzene (0.13 +/- 0.01 vs. 0.008 +/- 0.001 nmol/min.mg protein). HPLC and mass spectrometry analysis revealed that variants NB1, I100A, and I100S produce 4-nitrocatechol via m-nitrophenol, while the wild-type produces primarily p-nitrophenol and negligible amounts of nitrocatechol. Relative to wild-type T4MO, whole cells expressing variant I100A convert nitrobenzene into m-nitrophenol with a Vmax of 0.61 +/- 0.037 vs. 0.16 +/- 0.071 nmol/min.mg protein and convert m-nitrophenol into nitrocatechol with a Vmax of 3.93 +/- 0.26 vs. 0.58 +/- 0.033 nmol/min.mg protein. Hence, the regiospecificity of nitrobenzene oxidation was changed by the random mutagenesis, and this led to a significant increase in 4-nitrocatechol production. The regiospecificity of toluene oxidation was also altered, and all of the mutants produced 20% m-cresol and 80% p-cresol, while the wild-type produces 96% p-cresol. Interestingly, the rate of toluene oxidation (the natural substrate of the enzyme) by I100A was also higher by 65% (7.2 +/- 1.2 vs. 4.4 +/- 0.3 nmol/min mg protein). Homology-based modeling of TmoA suggests reducing the size of the side chain of I100 leads to an increase in the width of the active site channel, which facilitates access of substrates and promotes more flexible orientations.     

Crystallographic analysis of active site contributions to regiospecificity in the diiron enzyme toluene 4-monooxygenase

Crystal structures of toluene 4-monooxygenase hydroxylase in complex with reaction products and effector protein reveal active site interactions leading to regiospecificity. Complexes with phenolic products yield an asymmetric μ-phenoxo-bridged diiron center and a shift of diiron ligand E231 into a hydrogen bonding position with conserved T201. In contrast, complexes with inhibitors p-NH(2)-benzoate and p-Br-benzoate showed a μ-1,1 coordination of carboxylate oxygen between the iron atoms and only a partial shift in the position of E231. Among active site residues, F176 trapped the aromatic ring of products against a surface of the active site cavity formed by G103, E104 and A107, while F196 positioned the aromatic ring against this surface via a π-stacking interaction. The proximity of G103 and F176 to the para substituent of the substrate aromatic ring and the structure of G103L T4moHD suggest how changes in regiospecificity arise from mutations at G103. Although effector protein binding produced significant shifts in the positions of residues along the outer portion of the active site (T201, N202, and Q228) and in some iron ligands (E231 and E197), surprisingly minor shifts (<1 ?) were produced in F176, F196, and other interior residues of the active site. Likewise, products bound to the diiron center in either the presence or absence of effector protein did not significantly shift the position of the interior residues, suggesting that positioning of the cognate substrates will not be strongly influenced by effector protein binding. Thus, changes in product distributions in the absence of the effector protein are proposed to arise from differences in rates of chemical steps of the reaction relative to motion of substrates within the active site channel of the uncomplexed, less efficient enzyme, while structural changes in diiron ligand geometry associated with cycling between diferrous and diferric states are discussed for their potential contribution to product release.     

Toluene 3-monooxygenase of Ralstonia pickettii PKO1 is a para-hydroxylating enzyme

Oxygenases are promising biocatalysts for performing selective hydroxylations not accessible by chemical methods. Whereas toluene 4-monooxygenase (T4MO) of Pseudomonas mendocina KR1 hydroxylates monosubstituted benzenes at the para position and toluene ortho-monooxygenase (TOM) of Burkholderia cepacia G4 hydroxylates at the ortho position, toluene 3-monooxygenase (T3MO) of Ralstonia pickettii PKO1 was reported previously to hydroxylate toluene at the meta position, producing primarily m-cresol (R. H. Olsen, J. J. Kukor, and B. Kaphammer, J. Bacteriol. 176:3749-3756, 1994). Using gas chromatography, we have discovered that T3MO hydroxylates monosubstituted benzenes predominantly at the para position. TG1/pBS(Kan)T3MO cells expressing T3MO oxidized toluene at a maximal rate of 11.5 +/- 0.33 nmol/min/mg of protein with an apparent Km value of 250 microM and produced 90% p-cresol and 10% m-cresol. This product mixture was successively transformed to 4-methylcatechol. T4MO, in comparison, produces 97% p-cresol and 3% m-cresol. Pseudomonas aeruginosa PAO1 harboring pRO1966 (the original T3MO-bearing plasmid) also exhibited the same product distribution as that of TG1/pBS(Kan)T3MO. TG1/pBS(Kan)T3MO produced 66% p-nitrophenol and 34% m-nitrophenol from nitrobenzene and 100% p-methoxyphenol from methoxybenzene, as well as 62% 1-naphthol and 38% 2-naphthol from naphthalene; similar results were found with TG1/pBS(Kan)T4MO. Sequencing of the tbu locus from pBS(Kan)T3MO and pRO1966 revealed complete identity between the two, thus eliminating any possible cloning errors. 1H nuclear magnetic resonance analysis confirmed the structural identity of p-cresol in samples containing the product of hydroxylation of toluene by pBS(Kan)T3MO.     

Optimized expression and purification of toluene 4-monooxygenase hydroxylase

Toluene 4-monooxygenase is a four-protein complex that catalyzes the O(2)- and NADH-dependent oxidation of toluene to p-cresol. The influence of various expression systems on the host cell growth characteristics, purified protein yields, and specific activity of the hydroxylase (T4moH) component of the complex was evaluated by considering the cell mass obtained per liter of fermentation culture medium, the purified protein obtained per gram of cell mass, and the specific activity of purified T4moH. The specific activity of purified T4moH was determined to be 1200-1250 nmol of p-cresol formed per minute per milligram of T4moH in air-saturated 50 mM phosphate buffer, pH 7.5, at 25 degrees C in the presence of optimal concentrations of the other protein components of the complex, saturating toluene (5.8 mM at 25 degrees C), and saturating NADH (1 mM). This value was obtained for T4moH purified from several different expression systems and apparently represents the maximal specific activity of the enzyme complex for toluene hydroxylation. By manipulation of vectors and gene inserts to eliminate adventitious catalytic turnover of NADH, up to 60-fold increase in the volumetric yield of T4moH activity was obtained from recombinant fermentations in Escherichia coli BL21(DE3).     

Saturation mutagenesis of toluene ortho-monooxygenase of Burkholderia cepacia G4 for Enhanced 1-naphthol synthesis and chloroform degradation

Directed evolution of toluene ortho-monooxygenase (TOM) of Burkholderia cepacia G4 previously created the hydroxylase alpha-subunit (TomA3) V106A variant (TOM-Green) with increased activity for both trichloroethylene degradation (twofold enhancement) and naphthalene oxidation (six-times-higher activity). In the present study, saturation mutagenesis was performed at position A106 with Escherichia coli TG1/pBS(Kan)TOMV106A to improve TOM activity for both chloroform degradation and naphthalene oxidation. Whole cells expressing the A106E variant had two times better naphthalene-to-1-naphthol activity than the wild-type cells (V(max) of 9.3 versus 4.5 nmol.min(-1).mg of protein(-1) and unchanged K(m)), and the regiospecificity of the A106E variant was unchanged, with 98% 1-naphthol formed, as was confirmed with high-pressure liquid chromatography. The A106E variant degrades its natural substrate toluene 63% faster than wild-type TOM does (2.12 +/- 0.07 versus 1.30 +/- 0.06 nmol.min(-1).mg of protein(-1) [mean +/- standard deviation]) at 91 microM and has a substantial decrease in regiospecificity, since o-cresol (50%), m-cresol (25%), and p-cresol (25%) are formed, in contrast to the 98% o-cresol formed by wild-type TOM. The A106E variant also has an elevated expression level compared to that of wild-type TOM, as evidenced by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Another variant, the A106F variant, has 2.8-times-better chloroform degradation activity based on gas chromatography (V(max) of 2.61 versus 0.95 nmol.min(-1).mg of protein(-1) and unchanged K(m)) and chloride release (0.034 +/- 0.002 versus 0.012 +/- 0.001 nmol.min(-1).mg of protein(-1)). The A106F variant also was expressed at levels similar to those of wild-type TOM and 62%-better toluene oxidation activity than wild-type TOM (2.11 +/- 0.3 versus 1.30 +/- 0.06 nmol.min(-1).mg of protein(-1)). A shift in regiospecificity of toluene hydroxylation was also observed for the A106F variant, with o-cresol (28%), m-cresol (18%), and p-cresol (54%) being formed. Statistical analysis was used to estimate that 292 colonies must be screened for a 99% probability that all 64 codons were sampled during saturation mutagenesis.     

Solution structure of the toluene 4-monooxygenase effector protein (T4moD)

Toluene 4-monooxygenase (T4MO) from Pseudomonas mendocina catalyzes the NADH- and O(2)-dependent hydroxylation of toluene to form p-cresol. The complex consists of an NADH oxidoreductase (T4moF), a Rieske ferredoxin (T4moC), a diiron hydroxylase [T4moH, with (alphabetagamma)(2) quaternary structure], and a catalytic effector protein (T4moD). The solution structure of the 102-amino acid T4moD effector protein has been determined from 2D and 3D (1)H, (13)C, and (15)N NMR spectroscopic data. The structural model was refined through simulated annealing by molecular dynamics in torsion angle space (DYANA software) with input from 1467 experimental constraints, comprising 1259 distance constraints obtained from NOEs, 128 dihedral angle constraints from J-couplings, and 80 hydrogen bond constraints. Of 60 conformers that met the acceptance criteria, the 20 that best satisfied the input constraints were selected to represent the solution structure. With exclusion of the ill-defined N- and C-terminal segments (Ser1-Asn11 and Asp99-Met102), the atomic root-mean-square deviation for the 20 conformers with respect to the mean coordinates was 0.71 A for the backbone and 1.24 A for all non-hydrogen atoms. The secondary structure of T4moD consists of three alpha-helices and seven beta-strands arranged in an N-terminal betaalphabetabeta and a C-terminal betaalphaalphabetabetabeta domain topology. Although the published NMR structures of the methane monooxygenase effector proteins from Methylosinus trichosporium OB3b and Methylococcus capsulatus (Bath) have a similar secondary structure topology, their three-dimensional structures differ from that of T4moD. The major differences in the structures of the three effector proteins are in the relative orientations of the two beta-sheets and the interactions between the alpha-helices in the two domains. The structure of T4moD is closer to that of the methane monooxygenase effector protein from M. capsulatus (Bath) than that from M. trichosporium OB3b. The specificity of T4moD as an effector protein was investigated by replacing it in reconstituted T4MO complexes with effector proteins from monooxygenases from other bacterial species: Pseudomonas pickettii PKO1 (TbuV, toluene 3-monooxygenase); Pseudomonas species JS150 (TbmC, toluene 2-monooxygenase); and Burkeholderia cepacia G4 (S1, toluene 2-monooxygenase). The results showed that the closely related TbuV effector protein (55% sequence identity) provided partial activation of the complex, whereas the more distantly related TbmC (34% sequence identity) and S1 (29% sequence identity) did not. The (1)H NMR chemical shifts of the side-chain amide protons of Asn34, a conserved, structurally relevant amino acid, were found to be similar in spectra of effector proteins T4moD and TbuV but not in the spectrum of TbmC. This suggests that the region around Asn34 may be involved in structural aspects contributing to functional specificity.     

Regiospecific oxidation of naphthalene and fluorene by toluene monooxygenases and engineered toluene 4-monooxygenases of Pseudomonas mendocina KR1

The regiospecific oxidation of the polycyclic aromatic hydrocarbons naphthalene and fluorene was examined with Escherichia coli strains expressing wildtype toluene 4-monooxygenase (T4MO) from Pseudomonas mendocina KR1, toluene para-monooxygenase (TpMO) from Ralstonia pickettii PKO1, toluene ortho-monooxygenase (TOM) from Burkholderia cepacia G4, and toluene/ortho-xylene monooxygenase (ToMO) from P. stutzeri OX1. T4MO oxidized toluene (12.1+/-0.8 nmol/min/mg protein at 109 microM), naphthalene (7.7+/-1.5 nmol/min/mg protein at 5 mM), and fluorene (0.68+/-0.04 nmol/min/mg protein at 0.2 mM) faster than the other wildtype enzymes (2-22-fold) and produced a mixture of 1-naphthol (52%) and 2-naphthol (48%) from naphthalene, which was successively transformed to a mixture of 2,3-, 2,7-, 1,7-, and 2,6-dihydroxynaphthalenes (7%, 10%, 20%, and 63%, respectively). TOM and ToMO made 1,7-dihydroxynaphthalene from 1-naphthol, and ToMO made a mixture of 2,3-, 2,6-, 2,7-, and 1,7-dihydroxynaphthalene (26%, 22%, 1%, and 44%, respectively) from 2-naphthol. TOM had no activity on 2-naphthol, and T4MO had no activity on 1-naphthol. To take advantage of the high activity of wildtype T4MO but to increase its regiospecificity on naphthalene, seven engineered enzymes containing mutations in T4MO alpha hydroxylase TmoA were examined; the selectivity for 2-naphthol by T4MO I100A, I100S, and I100G was enhanced to 88-95%, and the selectivity for 1-naphthol was enhanced to 87% and 99% by T4MO I100L and G103S/A107G, respectively, while high oxidation rates were maintained except for G103S/A107G. Therefore, the regiospecificity for naphthalene oxidation was altered to practically pure 1-naphthol or 2-naphthol. All four wildtype monooxygenases were able to oxidize fluorene to different monohydroxylated products; T4MO oxidized fluorene successively to 3-hydroxyfluorene and 3,6-dihydroxyfluorene, which was confirmed by gas chromatography-mass spectrometry and 1H nuclear magnetic resonance analysis. TOM and its variant TomA3 V106A oxidize fluorene to a mixture of 1-, 2-, 3-, and 4-hydroxyfluorene. This is the first report of using enzymes to synthesize 1-, 3-, and 4-hydroxyfluorene, and 3,6-dihydroxyfluorene from fluorene as well as 2-naphthol and 2,6-dihydroxynaphthalene from naphthalene.     

Mutations of Toluene-4-Monooxygenase That Alter Regiospecificity of Indole Oxidation and Lead to Production of Novel Indigoid Pigments

Broad-substrate-range monooygenase enzymes, including toluene-4-monooxygenase (T4MO), can catalyze the oxidation of indole. The indole oxidation products can then condense to form the industrially important dye indigo. Site-directed mutagenesis of T4MO resulted in the creation of T4MO isoforms with altered pigment production phenotypes. High-pressure liquid chromatography, thin-layer chromatography, and nuclear magnetic resonance analysis of the indole oxidation products generated by the mutant T4MO isoforms revealed that the phenotypic differences were primarily due to changes in the regiospecificity of indole oxidation. Most of the mutations described in this study changed the ratio of the primary indole oxidation products formed (indoxyl, 2-oxindole, and isatin), but some mutations, particularly those involving amino acid G103 of tmoA, allowed for the formation of additional products, including 7-hydroxyindole and novel indigoid pigments. For example, mutant G103L converted 17% of added indole to 7-hydroxyindole and 29% to indigoid pigments including indigo and indirubin and two other structurally related pigments. The double mutant G103L:A107G converted 47% of indole to 7-hydroxyindole, but no detectable indigoid pigments were formed, similar to the product distribution observed with the toluene-2-monooxygenase (T2MO) of Burkholderia cepacia G4. These results demonstrate that modification of the tmoA active site can change the products produced by the enzyme and lead to the production of novel pigments and other indole oxidation products with potential commercial and medicinal utility.     

Protein engineering of toluene-o-xylene monooxygenase from Pseudomonas stutzeri OX1 for enhanced chlorinated ethene degradation and o-xylene oxidation

Toluene-o-xylene monooxygenase (ToMO) from Pseudomonas stutzeri OX1 has been shown to degrade all chlorinated ethenes individually and as mixtures. Here, DNA shuffling of the alpha hydroxylase fragment of ToMO (TouA) and saturation mutagenesis of the TouA active site residues I100, Q141, T201, F205, and E214 were used to enhance the degradation of chlorinated aliphatics. The ToMO mutants were identified using a chloride ion screen and then were further examined by gas chromatography. Escherichia coli TG1/pBS(Kan)ToMO expressing TouA saturation mutagenesis variant I100Q was identified that has 2.8-fold better trichloroethylene (TCE) degradation activity (apparent V _max of 1.77 nmol min⁻¹ mg⁻¹ protein⁻¹ vs 0.63 nmol min⁻¹ mg⁻¹ protein⁻¹). Another variant, E214G/D312N/M399V, has 2.5-fold better cis-1,2-dichloroethylene (cis-DCE) degradation activity (apparent V _max of 8.4 nmol min⁻¹ mg⁻¹ protein⁻¹ vs 3.3 nmol min⁻¹ mg⁻¹ protein⁻¹). Additionally, the hydroxylation regiospecificity of o-xylene and naphthalene were altered significantly for ToMO variants A107T/E214A, T201G, and T201S. Variant T201S produced 2.0-fold more 2,3-dimethylphenol (2,3-DMP) from o-xylene than the wild-type ToMO, whereas variant A107T/E214A had 6.0-fold altered regiospecificity for 2,3-DMP formation. Variant A107T/E214A also produced 3.0-fold more 2-naphthol from naphthalene than the wild-type ToMO, whereas the regiospecificity of variant T201S was altered to synthesize 3.0-fold less 2-naphthol, so that it made almost exclusively 1-naphthol (96%). Variant T201G was more regiospecific than variants A107T/E214A and T201S and produced 100% 3,4-DMP from o-xylene and >99% 1-naphthol from naphthalene. Hence, ToMO activity was enhanced for the degradation of TCE and cis-DCE and for the regiospecific hydroxylation of o-xylene and naphthalene through DNA shuffling and saturation mutagenesis.     

Mutations of toluene-4-monooxygenase that alter regiospecificity of indole oxidation and lead to production of novel indigoid pigments

Broad-substrate-range monooygenase enzymes, including toluene-4-monooxygenase (T4MO), can catalyze the oxidation of indole. The indole oxidation products can then condense to form the industrially important dye indigo. Site-directed mutagenesis of T4MO resulted in the creation of T4MO isoforms with altered pigment production phenotypes. High-pressure liquid chromatography, thin-layer chromatography, and nuclear magnetic resonance analysis of the indole oxidation products generated by the mutant T4MO isoforms revealed that the phenotypic differences were primarily due to changes in the regiospecificity of indole oxidation. Most of the mutations described in this study changed the ratio of the primary indole oxidation products formed (indoxyl, 2-oxindole, and isatin), but some mutations, particularly those involving amino acid G103 of tmoA, allowed for the formation of additional products, including 7-hydroxyindole and novel indigoid pigments. For example, mutant G103L converted 17% of added indole to 7-hydroxyindole and 29% to indigoid pigments including indigo and indirubin and two other structurally related pigments. The double mutant G103L:A107G converted 47% of indole to 7-hydroxyindole, but no detectable indigoid pigments were formed, similar to the product distribution observed with the toluene-2-monooxygenase (T2MO) of Burkholderia cepacia G4. These results demonstrate that modification of the tmoA active site can change the products produced by the enzyme and lead to the production of novel pigments and other indole oxidation products with potential commercial and medicinal utility.     

Altering toluene 4-monooxygenase by active-site engineering for the synthesis of 3-methoxycatechol, methoxyhydroquinone, and methylhydroquinone

Wild-type toluene 4-monooxygenase (T4MO) of Pseudomonas mendocina KR1 oxidizes toluene to p-cresol (96%) and oxidizes benzene sequentially to phenol, to catechol, and to 1,2,3-trihydroxybenzene. In this study T4MO was found to oxidize o-cresol to 3-methylcatechol (91%) and methylhydroquinone (9%), to oxidize m-cresol and p-cresol to 4-methylcatechol (100%), and to oxidize o-methoxyphenol to 4-methoxyresorcinol (87%), 3-methoxycatechol (11%), and methoxyhydroquinone (2%). Apparent V_max values of 6.6 ± 0.9 to 10.7 ± 0.1 nmol/min/ mg of protein were obtained for o-, m-, and p-cresol oxidation by wild-type T4MO, which are comparable to the toluene oxidation rate (15.1 ± 0.8 nmol/min/mg of protein). After these new reactions were discovered, saturation mutagenesis was performed near the diiron catalytic center at positions I100, G103, and A107 of the alpha subunit of the hydroxylase (TmoA) based on directed evolution of the related toluene o-monooxygenase of Burkholderia cepacia G4 (K. A. Canada, S. Iwashita, H. Shim, and T. K. Wood, J. Bacteriol. 184:344-349, 2002) and a previously reported T4MO G103L regiospecific mutant (K. H. Mitchell, J. M. Studts, and B. G. Fox, Biochemistry 41:3176-3188, 2002). By using o-cresol and o-methoxyphenol as model substrates, regiospecific mutants of T4MO were created; for example, TmoA variant G103A/A107S produced 3-methylcatechol (98%) from o-cresol twofold faster and produced 3-methoxycatechol (82%) from 1 mM o-methoxyphenol seven times faster than the wild-type T4MO (1.5 ± 0.2 versus 0.21 ± 0.01 nmol/min/mg of protein). Variant I100L produced 3-methoxycatechol from o-methoxyphenol four times faster than wild-type T4MO, and G103S/A107T produced methylhydroquinone (92%) from o-cresol fourfold faster than wild-type T4MO and there was 10 times more in terms of the percentage of the product. Variant G103S produced 40-fold more methoxyhydroquinone from o-methoxyphenol than the wild-type enzyme produced (80 versus 2%) and produced methylhydroquinone (80%) from o-cresol. Hence, the regiospecific oxidation of o-methoxyphenol and o-cresol was changed for significant synthesis of 3-methoxycatechol, methoxyhydroquinone, 3-methylcatechol, and methylhydroquinone. The enzyme variants also demonstrated altered monohydroxylation regiospecificity for toluene; for example, G103S/A107G formed 82% o-cresol, so saturation mutagenesis converted T4MO into an ortho-hydroxylating enzyme. Furthermore, G103S/A107T formed 100% p-cresol from toluene; hence, a better para-hydroxylating enzyme than wild-type T4MO was formed. Structure homology modeling suggested that hydrogen bonding interactions of the hydroxyl groups of altered residues S103, S107, and T107 influence the regiospecificity of the oxygenase reaction.     

Soluble expression and purification of the oxidoreductase component of toluene 4-monooxygenase

Toluene 4-monooxygenase (T4MO) is a member of the bacterial multicomponent monooxygenases, an enzyme family that utilizes a soluble diiron hydroxylase to oxidize a variety of hydrocarbons as the initial step in their metabolism. The hydroxylases obtain reducing equivalents from NAD(P)H via an electron transfer chain that is initiated by an oxidoreductase containing an N-terminal ferredoxin domain and C-terminal flavin- and NAD-binding domains. T4moF, the NADH oxidoreductase of T4MO, was expressed as a soluble protein in Escherichia coli BL21(DE3) from the pUC-derived expression vector pRS205. This vector contains a lac promoter instead of a T7 promoter. A three step purification from the soluble cell lysate yielded approximately 1 mg of T4moF per gram of wet cell paste with greater than 90% purity. The purified protein contained 1 mol of FAD and 2 mol of Fe per mol of T4moF; quantitative EPR spectroscopy showed approximately 1 mol of the S=1/2 signal from the reduced [2Fe-2S] cluster per mol of T4moF. Steady state kinetic analysis of p-cresol formation activity treating T4moF as the variable substrate while all other proteins and substrates were held constant gave apparent K(M-) and apparent k(cat)-values of 0.15 microM and 3.0 s(-1), respectively. This expression system and purification allows for the recovery of the soluble oxidoreductase in yields that facilitate further biochemical and structural characterizations.     

Toluene-4-monooxygenase, a three-component enzyme system that catalyzes the oxidation of toluene to p-cresol in Pseudomonas mendocina KR1.

Pseudomonas mendocina KR1 grows on toluene as a sole carbon and energy source. A multicomponent oxygenase was partially purified from toluene-grown cells and separated into three protein components. The reconstituted enzyme system, in the presence of NADH and Fe2+, oxidized toluene to p-cresol as the first detectable product. Experiments with p-deutero-toluene led to the isolation of p-cresol which retained 68% of the deuterium initially present in the parent molecule. When the reconstituted enzyme system was incubated with toluene in the presence of 18O2, the oxygen in p-cresol was shown to be derived from molecular oxygen. The results demonstrate that P. mendocina KR1 initiates degradation of toluene by a multicomponent enzyme system which has been designated toluene-4-monooxygenase.     

Preferential oxidative dehalogenation upon conversion of 2-halophenols by Rhodococcus opacus 1G

The regiospecificity of hydroxylation of C2-halogenated phenols by Rhodococcus opacus 1G was investigated. Oxidative defluorination at the C2 position ortho with respect to the hydroxyl moiety was preferred over hydroxylation at the non-fluorinated C6 position for all 2-fluorophenol compounds studied. Initial hydroxylation of 2,3, 5-trichlorophenol resulted in the exclusive formation of 3, 5-dichlorocatechol. These results indicate that, in contrast to all other phenol ortho-hydroxylases studied so far, phenol hydroxylase from R. opacus 1G is capable of catalyzing preferential oxidative defluorination but also oxidative dechlorination.