Integrating structure,bioinformatics, and enzymology to discover function: BioH,a new carboxylesterase from Escherichia coli

Structural proteomics projects are generating three-dimensional structures of novel, uncharacterized proteins at an increasing rate. However, structure alone is often insufficient to deduce the specific biochemical function of a protein. Here we determined the function for a protein using a strategy that integrates structural and bioinformatics data with parallel experimental screening for enzymatic activity. BioH is involved in biotin biosynthesis in Escherichia coli and had no previously known biochemical function. The crystal structure of BioH was determined at 1.7 A resolution. An automated procedure was used to compare the structure of BioH with structural templates from a variety of different enzyme active sites. This screen identified a catalytic triad (Ser82, His235, and Asp207) with a configuration similar to that of the catalytic triad of hydrolases. Analysis of BioH with a panel of hydrolase assays revealed a carboxylesterase activity with a preference for short acyl chain substrates. The combined use of structural bioinformatics with experimental screens for detecting enzyme activity could greatly enhance the rate at which function is determined from structure.     

The crystal structure of the cephalosporin deacetylating enzyme acetyl xylan esterase bound to paraoxon explains the low sensitivity of this serine hydrolase to organophosphate inactivation

Organophosphorus insecticides and nerve agents irreversibly inhibit serine hydrolase superfamily enzymes. One enzyme of this superfamily, the industrially important (for β-lactam antibiotic synthesis) AXE/CAH (acetyl xylan esterase/cephalosporin acetyl hydrolase) from the biotechnologically valuable organism Bacillus pumilus, exhibits low sensitivity to the organophosphate paraoxon (diethyl-p-nitrophenyl phosphate, also called paraoxon-ethyl), reflected in a high K(i) for it (~5 mM) and in a slow formation (t(?)~1 min) of the covalent adduct of the enzyme and for DEP (E-DEP, enzyme-diethyl phosphate, i.e. enzyme-paraoxon). The crystal structure of the E-DEP complex determined at 2.7 ? resolution (1 ?=0.1 nm) reveals strain in the active Ser1?1-bound organophosphate as a likely cause for the limited paraoxon sensitivity. The strain results from active-site-size limitation imposed by bulky conserved aromatic residues that may exclude as substrates esters having acyl groups larger than acetate. Interestingly, in the doughnut-like homohexamer of the enzyme, the six active sites are confined within a central chamber formed between two 60°-staggered trimers. The exclusive access to this chamber through a hole around the three-fold axis possibly limits the size of the xylan natural substrates. The enzyme provides a rigid scaffold for catalysis, as reflected in the lack of movement associated with paraoxon adduct formation, as revealed by comparing this adduct structure with that also determined in the present study at 1.9 ? resolution for the paraoxon-free enzyme.     

Functional and structural characterization of a thermostable acetyl esterase from Thermotoga maritima

TM0077 from Thermotoga maritima is a member of the carbohydrate esterase family 7 and is active on a variety of acetylated compounds, including cephalosporin C. TM0077 esterase activity is confined to short‐chain acyl esters (C2–C3), and is optimal around 100°C and pH 7.5. The positional specificity of TM0077 was investigated using 4‐nitrophenyl‐β‐D ‐xylopyranoside monoacetates as substrates in a β‐xylosidase‐coupled assay. TM0077 hydrolyzes acetate at positions 2, 3, and 4 with equal efficiency. No activity was detected on xylan or acetylated xylan, which implies that TM0077 is an acetyl esterase and not an acetyl xylan esterase as currently annotated. Selenomethionine‐substituted and native structures of TM0077 were determined at 2.1 and 2.5 Å resolution, respectively, revealing a classic α/β‐hydrolase fold. TM0077 assembles into a doughnut‐shaped hexamer with small tunnels on either side leading to an inner cavity, which contains the six catalytic centers. Structures of TM0077 with covalently bound phenylmethylsulfonyl fluoride and paraoxon were determined to 2.4 and 2.1 Å, respectively, and confirmed that both inhibitors bind covalently to the catalytic serine (Ser188). Upon binding of inhibitor, the catalytic serine adopts an altered conformation, as observed in other esterase and lipases, and supports a previously proposed catalytic mechanism in which Ser hydroxyl rotation prevents reversal of the reaction and allows access of a water molecule for completion of the reaction. Proteins 2012. © 2012 Wiley Periodicals, Inc.     

Crystallographic and biochemical investigations of kumamolisin-As, a serine-carboxyl peptidase with collagenase activity

Kumamolisin-As (previously called ScpA) is the first known example of a collagenase from the sedolisin family (MEROPS S53). This enzyme is active at low pH and in elevated temperatures. In this study that used x-ray crystallographic and biochemical methods, we investigated the structural basis of the preference of this enzyme for collagen and the importance of a glutamate residue in the unique catalytic triad (Ser(278)-Glu(78)-Asp(82)) for enzymatic activity. Crystal structures of the uninhibited enzyme and its complex with a covalently bound inhibitor, N-acetyl-isoleucyl-prolyl-phenylalaninal, showed the occurrence of a narrow S2 pocket and a groove that encompasses the active site and is rich in negative charges. Limited endoproteolysis studies of bovine type-I collagen as well as kinetic studies using peptide libraries randomized at P1 and P1', showed very strong preference for arginine at the P1 position, which correlated very well with the presence of a negatively charged residue in the S1 pocket of the enzyme. All of these features, together with those predicted through comparisons with fiddler crab collagenase, a serine peptidase, rationalize the enzyme's preference for collagen. A comparison of the Arrhenius plots of the activities of kumamolisin-As with either collagen or peptides as substrates suggests that collagen should be relaxed before proteolysis can occur. The E78H mutant, in which the catalytic triad was engineered to resemble that of subtilisin, showed only 0.01% activity of the wild-type enzyme, and its structure revealed that Ser(278), His(78), and Asp(82) do not interact with each other; thus, the canonical catalytic triad is disrupted.     

An alternative mechanism for amidase signature enzymes

The peptide amidase from Stenotrophomonas maltophilia catalyses predominantly the hydrolysis of the C-terminal amide bond in peptide amides. Peptide bonds or amide functions in amino acid side-chains are not hydrolysed. This specificity makes peptide amidase (Pam) interesting for different biotechnological applications. Pam belongs to the amidase signature (AS) family. It is the first protein within this family whose tertiary structure has been solved. The structure of the native Pam has been determined with a resolution of 1.4A and in complex with the competitive inhibitor chymostatin at a resolution of 1.8A. Chymostatin, which forms acyl adducts with many serine proteases, binds non-covalently to this enzyme.Pam folds as a very compact single-domain protein. The AS sequence represents a core domain that is covered by alpha-helices. This AS domain contains the catalytic residues. It is topologically homologous to the phosphoinositol phosphatase domain.The structural data do not support the recently proposed Ser-Lys catalytic dyad mechanism for AS enzymes. Our results are in agreement with the role of Ser226 as the primary nucleophile but differ concerning the roles of Ser202 and Lys123: Ser202, with direct contact both to the substrate molecule and to Ser226, presumably serves as an acid/bases catalyst. Lys123, with direct contact to Ser202 but no contact to Ser226 or the substrate molecule, most likely acts as an acid catalyst.     

Crystal structure of rabbit phosphoglucose isomerase, a glycolytic enzyme that moonlights as neuroleukin, autocrine motility factor, and differentiation mediator

The multifunctional protein phosphoglucose isomerase, also known as neuroleukin, autocrine motility factor, and differentiation and maturation mediator, has different roles inside and outside the cell. In the cytoplasm, it catalyzes the second step in glycolysis. Outside the cell, it serves as a nerve growth factor and cytokine. We have determined the three-dimensional structure of rabbit muscle phosphoglucose isomerase complexed with the competitive inhibitor D-gluconate 6-phosphate by X-ray crystallography at 2.5 A resolution. The structure shows that the enzyme is a dimer with two alpha/beta-sandwich domains in each subunit. The location of the bound D-gluconate 6-phosphate inhibitor leads to the identification of residues involved in substrate specificity (Ser209, Ser159, Thr214, Thr217, and Thr211). The results of previously published kinetic studies suggest that a lysine and a histidine are involved in the catalytic mechanism. The crystal structure suggests active site residues Lys518 and His388 might be these residues. In addition, the positions of amino acid residues that are substituted in the genetic disease nonspherocytic hemolytic anemia suggest how these substitutions can result in altered catalysis or protein stability.     

Crystallographic and biophysical analysis of a bacterial signal peptidase in complex with a lipopeptide-based inhibitor

We report here the crystallographic and biophysical analysis of a soluble, catalytically active fragment of the Escherichia coli type I signal peptidase (SPase Delta2-75) in complex with arylomycin A2. The 2.5-A resolution structure revealed that the inhibitor is positioned with its COOH-terminal carboxylate oxygen (O45) within hydrogen bonding distance of all the functional groups in the catalytic center of the enzyme (Ser90 O-gamma, Lys145 N-zeta, and Ser88 O-gamma) and that it makes beta-sheet type interactions with the beta-strands that line each side of the binding site. Ligand binding studies, calorimetry, fluorescence spectroscopy, and stopped-flow kinetics were also used to analyze the binding mode of this unique non-covalently bound inhibitor. The crystal structure was solved in the space group P4(3)2(1)2. A detailed comparison is made to the previously published acyl-enzyme inhibitor complex structure (space group: P2(1)2(1)2) and the apo-enzyme structure (space group: P4(1)2(1)2). Together this work provides insights into the binding of pre-protein substrates to signal peptidase and will prove helpful in the development of novel antibiotics.     

Crystal structure of human plasma platelet-activating factor acetylhydrolase: structural implication to lipoprotein binding and catalysis

Human plasma platelet-activating factor (PAF) acetylhydrolase functions by reducing PAF levels as a general anti-inflammatory scavenger and is linked to anaphylactic shock, asthma, and allergic reactions. The enzyme has also been implicated in hydrolytic activities of other pro-inflammatory agents, such as sn-2 oxidatively fragmented phospholipids. This plasma enzyme is tightly bound to low and high density lipoprotein particles and is also referred to as lipoprotein-associated phospholipase A2. The crystal structure of this enzyme has been solved from x-ray diffraction data collected to a resolution of 1.5 angstroms. It has a classic lipase alpha/beta-hydrolase fold, and it contains a catalytic triad of Ser273, His351, and Asp296. Two clusters of hydrophobic residues define the probable interface-binding region, and a prediction is given of how the enzyme is bound to lipoproteins. Additionally, an acidic patch of 10 carboxylate residues and a neighboring basic patch of three residues are suggested to play a role in high density lipoprotein/low density lipoprotein partitioning. A crystal structure is also presented of PAF acetylhydrolase reacted with the organophosphate compound paraoxon via its active site Ser273. The resulting diethyl phosphoryl complex was used to model the tetrahedral intermediate of the substrate PAF to the active site. The model of interface binding begins to explain the known specificity of lipoprotein-bound substrates and how the active site can be both close to the hydrophobic-hydrophilic interface and at the same time be accessible to the aqueous phase.     

Crystal structure of pseudomonas aeruginosa lipase in the open conformation. The prototype for family I.1 of bacterial lipases

The x-ray structure of the lipase from Pseudomonas aeruginosa PAO1 has been determined at 2.54 A resolution. It is the first structure of a member of homology family I.1 of bacterial lipases. The structure shows a variant of the alpha/beta hydrolase fold, with Ser(82), Asp(229), and His(251) as the catalytic triad residues. Compared with the "canonical" alpha/beta hydrolase fold, the first two beta-strands and one alpha-helix (alphaE) are not present. The absence of helix alphaE allows the formation of a stabilizing intramolecular disulfide bridge. The loop containing His(251) is stabilized by an octahedrally coordinated calcium ion. On top of the active site a lid subdomain is in an open conformation, making the catalytic cleft accessible from the solvent region. A triacylglycerol analogue is covalently bound to Ser(82) in the active site, demonstrating the position of the oxyanion hole and of the three pockets that accommodate the sn-1, sn-2, and sn-3 fatty acid chains. The inhibited enzyme can be thought to mimic the structure of the tetrahedral intermediate that occurs during the acylation step of the reaction. Analysis of the binding mode of the inhibitor suggests that the size of the acyl pocket and the size and interactions of the sn-2 binding pocket are the predominant determinants of the regio- and enantio-preference of the enzyme.     

The crystal structure of Bacillus subtilis lipase: a minimal alpha/beta hydrolase fold enzyme

The X-ray structure of the lipase LipA from Bacillus subtilis has been determined at 1.5 A resolution. It is the first structure of a member of homology family 1.4 of bacterial lipases. The lipase shows a compact minimal alpha/beta hydrolase fold with a six-stranded parallel beta-sheet flanked by five alpha-helices, two on one side of the sheet and three on the other side. The catalytic triad residues, Ser77, Asp133 and His156, and the residues forming the oxyanion hole (backbone amide groups of Ile12 and Met78) are in positions very similar to those of other lipases of known structure. However, no lid domain is present and the active-site nucleophile Ser77 is solvent-exposed. A model of substrate binding is proposed on the basis of a comparison with other lipases with a covalently bound tetrahedral intermediate mimic. It explains the preference of the enzyme for substrates with C8 fatty acid chains.     

Recognition site for the side chain of 2-ketoacid substrate in d-lactate dehydrogenase

Replacement of Tyr52 with Val or Ala in Lactobacillus pentosus d-lactate dehydrogenase induced high activity and preference for large aliphatic 2-ketoacids and phenylpyruvate. On the other hand, replacements with Arg, Thr or Asp severely reduced the enzyme activity, and the Tyr52Arg enzyme, the only one that exhibited significant enzyme activity, showed a similar substrate preference to the Tyr52Val and Tyr52Ala enzymes. Replacement of Phe299 with Gly or Ser greatly reduced the enzyme activity with less marked change in the substrate preference. Except for the Phe299Ser enzyme, these mutant enzymes with low catalytic activity consistently stimulated NADH oxidation in the absence of 2-ketoacid substrates. However, the double mutant enzymes, Tyr52Arg/Phe299Gly and Tyr52Thr/Phe299Ser, did not exhibit synergically decreased enzyme activity or the substrate-independent NADH oxidation, but rather increased activities toward certain 2-ketoacid substrates. These results indicate that the coordinative combination of amino acid residues at two positions is pivotal in both the functional recognition of the 2-ketoacid side chain and the protection of the bound NADH molecule from the solvent. Multiplicity in such combinations appears to provide d-LDH-related 2-hydroxyacid dehydrogenases with a great variety of catalytic and physiological functions.     

Inhibition of chymotrypsin by a complex of ortho-vanadate and benzohydroxamic acid: structure of the inert complex and its mechanistic interpretation

Serine proteases, like serine beta-lactamases, are rapidly and covalently inhibited by suitably designed phosph(on)ates. The active sites of these enzymes must, therefore, be able to stabilize the pentacoordinated transition states of phosphyl transfer reactions as well as the tetrahedral transition states of acyl transfers. It follows that these enzymes should also be inhibited by molecules capable of generating inert pentacoordinated species. We (J.H.B. and R.F.P.) have previously shown that these enzymes are, in fact, rapidly and reversibly inhibited by 1:1 complexes of vanadate and hydroxamic acids. In this paper, we present the first crystal structure of an acyl transferase inhibited by vanadate. The complex of vanadate and benzohydroxamic acid is a competitive inhibitor of alpha-chymotrypsin with a KI value of 16 muM. In the structure, obtained at a resolution of 1.5 A, the protein is conformationally little different from the apoenzyme. The vanadium, in a distorted octahedral ligand field, is covalently bound to the active site serine oxygen group. One oxgen ligand, presumably anionic, is located in the oxyanion hole. Another is directed roughly in the direction of the acyl transfer leaving group, and a third in the direction of the S2 site. The hydroxamate is bound to vanadium through the hydroxyl oxygen and also, more weakly, through the carbonyl group, to form a five-membered chelate ring. The effect of this chelation is to place the phenyl group of the inhibitor into the important S1 specificity site. The hydroxamate oxygen is directed in line away from the Ser195 Ogamma, approximating the direction of departure of a leaving group in phosphyl transfer. The entire complex can be seen as a reasonable mimic of a phosphyl transfer transition state where the leaving group is extended into the S1 site.     

Aspergillus niger protein EstA defines a new class of fungal esterases within the alpha/beta hydrolase fold superfamily of proteins

From the fungus Aspergillus niger, we identified a new gene encoding protein EstA, a member of the alpha/beta-hydrolase fold superfamily but of unknown substrate specificity. EstA was overexpressed and its crystal structure was solved by molecular replacement using a lipase-acetylcholinesterase chimera template. The 2.1 A resolution structure of EstA reveals a canonical Ser/Glu/His catalytic triad located in a small pocket at the bottom of a large solvent-accessible, bowl-shaped cavity. Potential substrates selected by manual docking procedures were assayed for EstA activity. Consistent with the pocket geometry, preference for hydrolysis of short acyl/propyl chain substrates was found. Identification of close homologs from the genome of other fungi, of which some are broad host-range pathogens, defines EstA as the first member of a novel class of fungal esterases within the superfamily. Hence the structure of EstA constitutes a lead template in the design of new antifungal agents directed toward its pathogenic homologs.     

Inactivation of Escherichia coli outer-membrane phospholipase A by the affinity label hexadecanesulfonyl fluoride. Evidence for an active-site serine

The Escherichia coli outer-membrane phospholipase A (OM PLA) is a membrane-bound acyl hydrolase with a broad substrate specificity. In order to obtain more insight into the mechanism of action of this enzyme, we designed an active-site-directed inhibitor for OM PLA on the basis of the known substrate specificity as a first step in the elucidation of the catalytic mechanism of this enzyme. The inhibitor, hexadecanesulfonyl fluoride, consists of a long hydrocarbon chain for high-affinity binding by the enzyme and a sulfonyl fluoride moiety as a reactive group. The kinetics of the inactivation of OM PLA by hexadecanesulfonyl fluoride were studied in Triton X-100 micelles. Inactivation is very fast, specific and shows the same characteristics with respect to acyl specificity, pH profile and metal ion requirement as the activity of OM PLA on substrates. Incubation of OM PLA with a stoichiometric amount of hexadecanesulfonyl fluoride leads to a total and irreversible loss of enzyme activity, resulting from the sulfonylation of Ser144. This Ser144, which we suggest to be the active-site serine of OM PLA, is part of the sequence HDSNG, whereas in the water-soluble serine proteases and lipases the structural motif GXSXG is normally encountered. On the basis of the kinetics of inactivation of OM PLA by hexadecanesulfonyl fluoride, we discuss a possible catalytic mechanism of the enzyme.     

Carboxyl proteinase from Pseudomonas defines a novel family of subtilisin-like enzymes

The crystal structure of a pepstatin-insensitive carboxyl proteinase from Pseudomonas sp. 101 (PSCP) has been solved by single-wavelength anomalous diffraction using the absorption peak of bromide anions. Structures of the uninhibited enzyme and of complexes with an inhibitor that was either covalently or noncovalently bound were refined at 1.0-1.4 A resolution. The structure of PSCP comprises a single compact domain with a diameter of approximately 55 A, consisting of a seven-stranded parallel beta-sheet flanked on both sides by a number of helices. The fold of PSCP is a superset of the subtilisin fold, and the covalently bound inhibitor is linked to the enzyme through a serine residue. Thus, the structure of PSCP defines a novel family of serine-carboxyl proteinases (defined as MEROPS S53) with a unique catalytic triad consisting of Glu 80, Asp 84 and Ser 287.     

Probing the acyl-binding pocket of aminoacylase-1

The aminoacylase-1/metallopeptidase 20 (Acy1/M20) family features several l-aminoacylases useful in biocatalysis. Mammalian Acy1, in particular, has been applied in racemic resolution and reverse hydrolysis. Despite recent advances in our understanding of the active site architecture and functioning, determinants of Acy1 substrate specificity have remained uncharted. Comparison to bacterial homologues points to a sterically more restricted acyl-binding pocket for Acy1. Here we sought to map characteristics of the acyl-binding pocket of human and porcine Acy1. Toward this end, we determined Michaelis constants for an analogue series of aliphatic N-acyl- l-methionine substrates and translated the values into three-dimensional quantitative structure-activity relationship models employing the minimal topological difference-partial least square method. The QSAR models for the two enzymes suggest overall similar binding pockets in the acetyl-binding portion and indicate a general preference for straight-chain acyl moieties. Embedding of the QSAR map for human Acy1 in the structure of its metal-binding domain associates the side chain of Ile177 with limited acyl chain elongation which was not observed for the porcine enzyme. The topological model further supports roles of Thr347 and Leu372, which are both conserved in the porcine enzyme, in restricting acyl chain branching at the alpha- and beta-positions, respectively. Mutational analyses confirmed our predictions for Thr347 and Leu372. Moreover, the T347S variant of human Acy1 exhibited markedly increased catalytic efficiency against N-benzoylamino acids, demonstrating the potential for engineering of substrate specificity in Acy1. We discuss the more general application of the employed procedure for protein design.     

Inhibition of class C beta-lactamases: structure of a reaction intermediate with a cephem sulfone

The crystallographic structure of the Enterobacter cloacae GC1 extended-spectrum class C beta-lactamase, inhibited by a new 7-alkylidenecephalosporin sulfone, has been determined by X-ray diffraction at 100 K to a resolution of 1.6 A. The crystal structure was solved by molecular replacement using the unliganded structure [Crichlow et al. (1999) Biochemistry 38, 10256-10261] and refined to a crystallographic R-factor equal to 0.183 (R(free) 0.208). Cryoquenching of the reaction of the sulfone with the enzyme produced an intermediate that is covalently bound via Ser64. After acylation of the beta-lactam ring, the dihydrothiazine dioxide ring opened with departure of the sulfinate. Nucleophilic attack of a side chain pyridine nitrogen atom on the C6 atom of the resultant imine yielded a bicyclic aromatic system which helps to stabilize the acyl enzyme to hydrolysis. A structural assist to this resonance stabilization is the positioning of the anionic sulfinate group between the probable catalytic base (Tyr150) and the acyl ester bond so as to block the approach of a potentially deacylating water molecule. Comparison of the liganded and unliganded protein structures showed that a major movement (up to 7 A) and refolding of part of the Omega-loop (215-224) accompanies the binding of the inhibitor. This conformational flexibility in the Omega-loop may form the basis of an extended-spectrum activity of class C beta-lactamases against modern cephalosporins.     

Active-site mobility in human immunodeficiency virus, type 1, protease as demonstrated by crystal structure of A28S mutant.

The mutation Ala28 to serine in human immunodeficiency virus, type 1, (HIV-1) protease introduces putative hydrogen bonds to each active-site carboxyl group. These hydrogen bonds are ubiquitous in pepsin-like eukaryotic aspartic proteases. In order to understand the significance of this difference between HIV-1 protease and homologous, eukaryotic aspartic proteases, we solved the three-dimensional structure of A28S mutant HIV-1 protease in complex with a peptidic inhibitor U-89360E. The structure has been determined to 2.0 A resolution with an R factor of 0.194. Comparison of the mutant enzyme structure with that of the wild-type HIV-1 protease bound to the same inhibitor (Hong L, Treharne A, Hartsuck JA, Foundling S, Tang J, 1996, Biochemistry 35:10627-10633) revealed double occupancy for the Ser28 hydroxyl group, which forms a hydrogen bond either to one of the oxygen atoms of the active-site carboxyl or to the carbonyl oxygen of Asp30. We also observed marked changes in orientation of the Asp25 catalytic carboxyl groups, presumably caused by the new hydrogen bonds. These observations suggest that catalytic aspartyl groups of HIV-1 protease have significant conformational flexibility unseen in eukaryotic aspartic proteases. This difference may provide an explanation for some unique catalytic properties of HIV-1 protease.     

The binding of substrate analogs to phosphotriesterase

Phosphotriesterase (PTE) from Pseudomonas diminuta catalyzes the detoxification of organophosphates such as the widely utilized insecticide paraoxon and the chemical warfare agent sarin. The three-dimensional structure of the enzyme is known from high resolution x-ray crystallographic analyses. Each subunit of the homodimer folds into a so-called TIM barrel, with eight strands of parallel beta-sheet. The two zinc ions required for activity are positioned at the C-terminal portion of the beta-barrel. Here, we describe the three-dimensional structure of PTE complexed with the inhibitor diisopropyl methyl phosphonate, which serves as a mimic for sarin. Additionally, the structure of the enzyme complexed with triethyl phosphate is also presented. In the case of the PTE-diisopropyl methyl phosphonate complex, the phosphoryl oxygen of the inhibitor coordinates to the more solvent-exposed zinc ion (2.5 A), thereby lending support to the presumed catalytic mechanism involving metal coordination of the substrate. In the PTE-triethyl phosphate complex, the phosphoryl oxygen of the inhibitor is positioned at 3.4 A from the more solvent-exposed zinc ion. The two structures described in this report provide additional molecular understanding for the ability of this remarkable enzyme to hydrolyze such a wide range of organophosphorus substrates.     

Sinapoyltransferases in the light of molecular evolution

Acylation is a prevalent chemical modification that to a significant extent accounts for the tremendous diversity of plant metabolites. To catalyze acyl transfer reactions, higher plants have evolved acyltransferases that accept β-acetal esters, typically 1-O-glucose esters, as an alternative to the ubiquitously occurring CoA-thioester-dependent enzymes. Shared homology indicates that the β-acetal ester-dependent acyltransferases are derived from a common hydrolytic ancestor of the Serine CarboxyPeptidase (SCP) type, giving rise to the name Serine CarboxyPeptidase-Like (SCPL) acyltransferases. We have analyzed structure–function relationships, reaction mechanism and sequence evolution of Arabidopsis 1-O-sinapoyl-β-glucose:l-malate sinapoyltransferase (AtSMT) and related enzymes to investigate molecular changes required to impart acyltransferase activity to hydrolytic enzymes. AtSMT has maintained the catalytic triad of the hydrolytic ancestor as well as part of the H-bond network for substrate recognition to bind the acyl acceptor l-malate. A Glu/Asp substitution at the amino acid position preceding the catalytic Ser supports binding of the acyl donor 1-O-sinapoyl-β-glucose and was found highly conserved among SCPL acyltransferases. The AtSMT-catalyzed acyl transfer reaction follows a random sequential bi-bi mechanism that requires both substrates 1-O-sinapoyl-β-glucose and l-malate bound in an enzyme donor–acceptor complex to initiate acyl transfer. Together with the strong fixation of the acyl acceptor l-malate, the acquisition of this reaction mechanism favours transacylation over hydrolysis in AtSMT catalysis. The model structure and enzymatic side activities reveal that the AtSMT-mediated acyl transfer proceeds via a short-lived acyl enzyme complex. With regard to evolution, the SCPL acyltransferase clade most likely represents a recent development. The encoding genes are organized in a tandem-arranged cluster with partly overlapping functions. With other enzymes encoded by the respective gene cluster on Arabidopsis chromosome 2, AtSMT shares the enzymatic side activity to disproportionate 1-O-sinapoyl-β-glucoses to produce 1,2-di-O-sinapoyl-β-glucose. In the absence of the acyl acceptor l-malate, a residual esterase activity became obvious as a remnant of the hydrolytic ancestor. With regard to the evolution of Arabidopsis SCPL acyltransferases, our results suggest early neofunctionalization of the hydrolytic ancestor toward acyltransferase activity and acyl donor specificity for 1-O-sinapoyl-β-glucose followed by subfunctionalization to recognize different acyl acceptors.