Ty1 Gag Enhances the Stability and Nuclear Export of Ty1 mRNA

Retrotransposon and retroviral RNA delivery to particle assembly sites is essential for their replication. mRNA and Gag from the Ty1 retrotransposon colocalize in cytoplasmic foci, which are required for transposition and may be the sites for virus‐like particle (VLP) assembly. To determine which Ty1 components are required to form mRNA/Gag foci, localization studies were performed in a Ty1‐less strain expressing galactose‐inducible Ty1 plasmids (pGTy1) containing mutations in GAG or POL. Ty1 mRNA/Gag foci remained unaltered in mutants defective in Ty1 protease (PR) or deleted for POL. However, Ty1 mRNA containing a frameshift mutation (Ty1fs) that prevents the synthesis of all proteins accumulated in the nucleus. Ty1fs RNA showed a decrease in stability that was mediated by the cytoplasmic exosome, nonsense‐mediated decay (NMD) and the processing body. Localization of Ty1fs RNA remained unchanged in an nmd2Δ mutant. When Gag and Ty1fs mRNA were expressed independently, Gag provided in trans increased Ty1fs RNA level and restored localization of Ty1fs RNA in cytoplasmic foci. Endogenously expressed Gag also localized to the nuclear periphery independent of RNA export. These results suggest that Gag is required for Ty1 mRNA stability, efficient nuclear export and localization into cytoplasmic foci.     

Characterization of a transpositionally active Ty3 element and identification of the Ty3 integrase protein.

Ty3 is a Saccharomyces cerevisiae retrotransposon associated with tRNA genes. Two Ty3 elements have been cloned and characterized. The complete nucleotide sequence for one element, Ty3-2, was reported previously (L. J. Hansen, D. L. Chalker, and S. B. Sandmeyer, Mol. Cell. Biol. 9:5245-5256, 1988). However, this element is incapable of autonomous transposition. The complete DNA sequence of a transpositionally competent Ty3 element, Ty3-1, is presented here. Its sequence translates into two overlapping open reading frames, TYA3-1 and TYB3-1, which encode proteins with homology to the proteins specified by the retroviral gag and pol genes, respectively. Comparison of the Ty3-1 nucleotide sequence to Ty3-2 suggests that the TYB3-2 open reading frame of Ty3-2 is truncated by the deletion of a single nucleotide, which causes a frameshift mutation. Restoration of the reading frame with insertion of a single adenine by site-directed mutagenesis converted Ty3-2 into a transpositionally active element, Ty3-2(+ A). Western blot analysis with antibodies made against synthetic peptides identified integrase (IN) proteins in viruslike particle preparations from cells expressing Ty3 elements. Cells expressing Ty3-1 and Ty3-2 (+A) produce antibody-reactive proteins with approximate molecular masses of 61 and 58 kilodaltons (kDa), while cells expressing Ty3-2 produce reactive proteins of approximately 52 and 49 kDa. Together, these data show that the 61- or 58-kDa protein, or both, provides the integrase function of Ty3.     

Substrate specificity of Ty1 integrase.

Integration of the Saccharomyces cerevisiae retrotransposon Ty1 requires the element-encoded integrase (IN) protein, which is a component of cytoplasmic virus-like particles (VLPs). Using purified recombinant Ty1 IN and an oligonucleotide integration assay based on Ty1 long terminal repeat sequences, we have compared IN activity on substrates having either wild-type or altered donor ends. IN showed a marked preference for blunt-end substrates terminating in an A:T pair over substrates ending in a G:C pair or a 3' dideoxyadenosine. VLP activity on representative substrates also showed preference for donor strands which have an adenosine terminus. Staggered-end substrates showed little activity when nucleotides were removed from the end of the wild-type donor strand, but removal of one nucleotide from the complementary strand did not significantly diminish activity. Removal of additional nucleotides from the complementary strand reduced activity to minimal detection levels. These results suggest that the sequence specificity of Ty1 IN is not stringent in vitro. The absence of Ty1 IN-mediated 3' dinucleotide cleavage, a characteristic of retroviral integrases, was demonstrated by using selected substrates. In addition to the forward reaction, both recombinant IN and VLP-associated IN carry out the reverse disintegration reaction with long terminal repeat-based dumbbell substrates. Disintegration activity exhibits sequence preferences similar to those observed for the forward reaction.     

Ty Element-Induced Temperature-Sensitive Mutations of Saccharomyces Cerevisiae

Temperature-sensitive mutants of Saccharomyces cerevisiae were isolated by insertional mutagenesis using the HIS3 marked retrotransposon TyH3HIS3. In such mutants, the TyHIS3 insertions are expected to identify loci which encode genes essential for cell growth at high temperatures but dispensable at low temperatures. Five mutations were isolated and named hit for high temperature growth. The hit1-1 mutation was located on chromosome X and conferred the pet phenotype. Two hit2 mutations, hit2-1 and hit2-2, were located on chromosome III and caused the deletion of the PET18 locus which has been shown to encode a gene required for growth at high temperatures. The hit3-1 mutation was located on chromosome VI and affected the CDC26 gene. The hit4-1 mutation was located on chromosome XIII. These hit mutations were analyzed in an attempt to identify novel genes involved in the heat shock response. The hit1-1 mutation caused a defect in synthesis of a 74-kD heat shock protein. Western blot analysis revealed that the heat shock protein corresponded to the SSC1 protein, a member of the yeast hsp70 family. In the hit1-1 mutant, the TyHIS3 insertion caused a deletion of a 3-kb DNA segment between the delta 1 and delta 4 sequences near the SUP4 locus. The 1031-bp wild-type HIT1 DNA which contained an open reading frame encoding a protein of 164 amino acids and the AGG arginine tRNA gene complemented all hit1-1 mutant phenotypes, indicating that the mutant phenotypes were caused by the deletion of these genes. The pleiotropy of the HIT1 locus was analyzed by constructing a disruption mutation of each gene in vitro and transplacing it to the chromosome. This analysis revealed that the HIT1 gene essential for growth at high temperatures encodes the 164-amino acid protein. The arginine tRNA gene, named HSX1, is essential for growth on a nonfermentable carbon source at high temperatures and for synthesis of the SSC1 heat shock protein.     

The pattern of amplification and differentiation of Ty1-copia and Ty3-gypsy retrotransposons in Brassicaceae species

One of the causes of genome size expansion is considered to be amplification of retrotransposons. We determined nucleotide sequences of 24 PCR products for each of six retrotransposons in Brassica rapa and Brassica oleracea. Phylogenetic trees of these sequences showed species-specific clades. We also sequenced STF7a homologs and Tto1 homologs, 24 PCR products each, in nine diploids and three allopolyploids, and constructed phylogenetic trees. In these phylogenetic trees, species-specific clades of diploid species were also formed, but retrotransposons of allopolyploids were clustered into the clades of their original genomes, indicating that these two retrotransposons amplified after speciation of the nine diploids. Genetic variation in these retrotransposons may have arisen before emergence of allopolyploid species. There was a positive correlation between the genome size and the average number of substitutions of STF7a and Tto1 homologs in at least seven diploids. The implications of these results in the genome evolution of Brassicaceae are herein discussed.     

Distribution of Ty3-gypsy- and Ty1-copia-like DNA sequences in the genus Helianthus and other Asteraceae.

Two repeated DNA sequences, pHaS13 and pHaS211, which revealed similarity to the int gene of Ty3-gypsy retrotransposons and the RNAse-H gene of Ty1-copia retroelements, respectively, were surveyed in Asteraceae species and within the genus Helianthus. Southern analysis of the genome of selected Asteraceae that belong to different tribes showed that pHaS13- and pHaS211-related subfamilies of gypsy- and copia-like retroelements are highly redundant only in Helianthus and, to a lesser extent, in Tithonia, a Helianthus strict relative. However, under low stringency posthybridization washes, bands were observed in almost all the other Asteraceae tested when pHaS13 was used as a probe, and in several species when pHaS211 was hybridized. FISH analysis of pHaS13 or pHaS211 probes was performed in species in which labelling was observed in Southern hybridizations carried out under high stringency conditions (Helianthus annuus, Tithonia rotundifolia, Ageratum spp., Leontopodium spp., Senecio vulgaris for pHaS13, and H. annuus, Tithonia rotundifolia, and S. vulgaris for pHaS211). Scattered labelling was observed over all metaphase chromosomes, indicating a large dispersal of both Ty3-gypsy- and Ty1-copia-like retroelements. However, preferential localization of Ty3-gypsy-like sequences at centromeric chromosome regions was observed in all of the species studies but one, even in species in which pHaS13-related elements are poorly represented. Ty1-copia-like sequences showed preferential localization at the chromosome ends only in H. annuus. To study the evolution of gypsy- and copia-like retrotransposons in Helianthus, cladograms were built based on the Southern blot hybridization patterns of pHaS13 or pHaS211 sequences to DNA digests of several species of this genus. Both cladograms agree in splitting the genomes studied into annuals and perennials. Differences that occurred within the clades of perennial and annual species between gypsy- and copia-like retroelements indicated that these retrotransposons were differentially active during Helianthus speciation, suggesting that the evolution of the 2 retroelement families was, within limits, independent.     

Fitness Effects of Ty Transposition in Saccharomyces Cerevisiae

It has been suggested that the primary evolutionary role of transposable elements is negative and parasitic. Alternatively, the target specificity and gene regulatory capabilities of many transposable elements raise the possibility that transposable element-induced mutations are more likely to be adaptively favorable than other types of mutations. Populations of Saccharomyces cerevisiae containing large amounts of variation for Ty1 genomic insertions were constructed, and the effects of Ty1 copy number on two components of fitness, yield and growth rate were determined. Although mean stationary phase density decreased with increased Ty1 copy number, the variance and range increased. The distributions of stationary phase densities indicate that many Ty1 insertions have negative effects on fitness, but also that some may have positive effects. To test directly for adaptively favorable Ty1 insertions, populations containing large amounts of variability for Ty1 copy number were grown in continuous culture. After 98-112 generations the frequency of clones containing zero Ty1 elements had decreased to approximately 0.0, and specific Ty1-containing clone families had predominated. Considering that most of the genetic variation in the populations was due to Ty1 transposition, and that Ty1 insertions had, on average, a negative effect on fitness, we conclude that Ty1 transposition events were directly responsible for the production of adaptive mutations in the clones that predominated in the populations.     

Multimeric arrays of the yeast retrotransposon Ty.

We have identified a novel integrated form of the yeast retrotransposon Ty consisting of multiple elements joined into large arrays. These arrays were first identified among Ty-induced alpha-pheromone-resistant mutants of MATa cells of Saccharomyces cerevisiae which contain Ty insertions at HML alpha that result in the expression of that normally silent cassette. These insertions are multimeric arrays of both the induced genetically marked Ty element and unmarked Ty elements. Structural analysis of the mutations indicated that the arrays include tandem direct repeats of Ty elements separated by only a single long terminal repeat. The Ty-HML junction fragments of one mutant were cloned and shown to contain a 5-base-pair duplication of the target sequence that is characteristic of a Ty transpositional insertion. In addition, the arrays include rearranged Ty elements that do not have normal long terminal repeat junctions. We have also identified multimeric Ty insertions at other chromosomal sites and as insertions that allow expression of a promoterless his3 gene on a plasmid. The results suggest that Ty transposition includes an intermediate that can undergo recombination to produce multimers.