Life cycle assessment of biodiesel production from microalgae in ponds

This paper analyses the potential environmental impacts and economic viability of producing biodiesel from microalgae grown in ponds. A comparative Life Cycle Assessment (LCA) study of a notional production system designed for Australian conditions was conducted to compare biodiesel production from algae (with three different scenarios for carbon dioxide supplementation and two different production rates) with canola and ULS (ultra-low sulfur) diesel. Comparisons of GHG (greenhouse gas) emissions (g CO₂-e/t km) and costs (¢/t km) are given. Algae GHG emissions (−27.6 to 18.2) compare very favourably with canola (35.9) and ULS diesel (81.2). Costs are not so favourable, with algae ranging from 2.2 to 4.8, compared with canola (4.2) and ULS diesel (3.8). This highlights the need for a high production rate to make algal biodiesel economically attractive.     

Biodiesel production from Jatropha oil by catalytic and non-catalytic approaches: an overview

Biodiesel (fatty acids alkyl esters) is a promising alternative fuel to replace petroleum-based diesel that is obtained from renewable sources such as vegetable oil, animal fat and waste cooking oil. Vegetable oils are more suitable source for biodiesel production compared to animal fats and waste cooking since they are renewable in nature. However, there is a concern that biodiesel production from vegetable oil would disturb the food market. Oil from Jatropha curcas is an acceptable choice for biodiesel production because it is non-edible and can be easily grown in a harsh environment. Moreover, alkyl esters of jatropha oil meet the standard of biodiesel in many countries. Thus, the present paper provides a review on the transesterification methods for biodiesel production using jatropha oil as feedstock.     

Manipulating Fatty Acid Biosynthesis in Microalgae for Biofuel through Protein-Protein Interactions

Microalgae are a promising feedstock for renewable fuels, and algal metabolic engineering can lead to crop improvement, thus accelerating the development of commercially viable biodiesel production from algae biomass. We demonstrate that protein-protein interactions between the fatty acid acyl carrier protein (ACP) and thioesterase (TE) govern fatty acid hydrolysis within the algal chloroplast. Using green microalga Chlamydomonas reinhardtii (Cr) as a model, a structural simulation of docking CrACP to CrTE identifies a protein-protein recognition surface between the two domains. A virtual screen reveals plant TEs with similar in silico binding to CrACP. Employing an activity-based crosslinking probe designed to selectively trap transient protein-protein interactions between the TE and ACP, we demonstrate in vitro that CrTE must functionally interact with CrACP to release fatty acids, while TEs of vascular plants show no mechanistic crosslinking to CrACP. This is recapitulated in vivo, where overproduction of the endogenous CrTE increased levels of short-chain fatty acids and engineering plant TEs into the C. reinhardtii chloroplast did not alter the fatty acid profile. These findings highlight the critical role of protein-protein interactions in manipulating fatty acid biosynthesis for algae biofuel engineering as illuminated by activity-based probes.     

Waste molasses alone displaces glucose-based medium for microalgal fermentation towards cost-saving biodiesel production

The by-product of sugar refinery—waste molasses was explored as alternative to glucose-based medium of Chlorella protothecoides in this study. Enzymatic hydrolysis is required for waste molasses suitable for algal growth. Waste molasses hydrolysate was confirmed as a sole source of full nutrients to totally replace glucose-based medium in support of rapid growth and high oil yield from algae. Under optimized conditions, the maximum algal cell density, oil content, and oil yield were respectively 70.9 g/L, 57.6%, and 40.8 g/L. The scalability of the waste molasses-fed algal system was confirmed from 0.5 L flasks to 5 L fermenters. The quality of biodiesel from waste molasses-fed algae was probably comparable to that from glucose-fed ones. Economic analysis indicated the cost of oil production from waste molasses-fed algae reduced by 50%. Significant cost reduction of algal biodiesel production through fermentation engineering based on the approach is expected.     

Production of algae-based biodiesel using the continuous catalytic Mcgyan® process

This study demonstrates the production of algal biodiesel from Dunaliella tertiolecta, Nannochloropsis oculata, wild freshwater microalgae, and macroalgae lipids using a highly efficient continuous catalytic process. The heterogeneous catalytic process uses supercritical methanol and porous titania microspheres in a fixed bed reactor to catalyze the simultaneous transesterification and esterification of triacylglycerides and free fatty acids, respectively, to fatty acid methyl esters (biodiesel). Triacylglycerides and free fatty acids were converted to alkyl esters with up to 85% efficiency as measured by 300 MHz ¹H NMR spectroscopy. The lipid composition of the different algae was studied gravimetrically and by gas chromatography. The analysis showed that even though total lipids comprised upwards of 19% of algal dry weight the saponifiable lipids, and resulting biodiesel, comprised only 1% of dry weight. Thus highlighting the need to determine the triacylglyceride and free fatty acid content when considering microalgae for biodiesel production.     

One-stage and two-stage anaerobic digestion of lipid-extracted algae

Waste-grown microalgae are a potentially important biomass for wastewater treatment. The lipid accumulated in microalgae could be utilized as feedstocks for biodiesel production. The algal residues, as major by-products derived from lipid extraction, mainly consist of carbohydrate and protein, making anaerobic digestion an efficient way to recover energy. The conversion of lipid-extracted algal residues into methane plays dual role in renewable energy production and sustainable development of microalgal biodiesel industry. Therefore, an anaerobic fermentation process for investigation of the methane production potential of algal residues was conducted in this paper. The effect of inoculum to substrate ratios (ISRs) on the methane production by anaerobic digestion of Chlorella sp. residue in a single stage was evaluated. The maximum methane yield of 195.6 ml CH₄/g volatile solid (VS) was obtained at an ISR of 1:1. The stability and progress of the reaction from algal residues to methane were monitored by measuring the pH, volatile fatty acids (VFAs), total ammoniacal nitrogen (TAN), and methane volume. Based on the results of one-stage experiments, two-stage technology was proposed and was found to be more suitable for high organic load. The optimum conditions for acidogenesis and methanogenesis are indicated in this paper.     

Predaceous insects may limit algal grazers in high-nutrient environments: implications for wastewater remediation in open bioreactors

Algal biofuel has potential as a source of renewable fuel and a tool for wastewater remediation. Open algal bioreactors fertilized with wastewater can have net energy gain but are vulnerable to colonization by algal grazers. However, colonizing predaceous insects may limit grazer impacts on algae. Here, we investigate the effects of grazers, predators, and invading algae species on algal production and community structure in high-nutrient environments. First, we grew diverse algal assemblages in treated municipal wastewater in a greenhouse with Daphnia grazers and different insect predators that were added experimentally. When Daphnia were present without predators, they eliminated suspended algae. But, dragonfly larvae [Odonata: Libellulidae] and backswimmers [Hemiptera: Notonectidae], but not larval diving beetles [Coloeoptera: Dytiscidae], suppressed Daphnia allowing suspended algae to persist. Second, we grew Chlorella algae in field tanks that were open or protected from natural invertebrate colonization and half the tanks received wild-collected plankton in a factorial design. Mosquito larvae [Culex sp.] readily colonized open tanks and reduced algal mass and dissolved phosphorus concentrations. Colonist addition to open tanks shifted algal functional and taxonomic composition but did not impact suspended algal production. Our study indicates that large numbers of grazer individuals can rapidly colonize open bioreactors. Experimentally added and naturally colonizing grazers altered algal community structure and reduced algal standing crops but may also aid in nutrient removal from wastewater-fed bioreactors. Effective operation of open algal bioreactors must consider cultivated algae species’ vulnerability to competition and local grazers as well as the ability of potential predators to both naturally disperse into bioreactors and to control grazers.     

Life-cycle assessment of microalgae culture coupled to biogas production

Due to resource depletion and climate change, lipid-based algal biofuel has been pointed out as an interesting alternative because of the high productivity of algae per hectare and per year and its ability to recycle CO₂ from flue gas. Another option for taking advantage of the energy content of the microalgae is to directly carry out anaerobic digestion of raw algae in order to produce methane and recycle nutrients (N, P and K). In this study, a life-cycle assessment (LCA) of biogas production from the microalgae Chlorella vulgaris is performed and the results are compared to algal biodiesel and to first generation biodiesels. These results suggest that the impacts generated by the production of methane from microalgae are strongly correlated with the electric consumption. Progresses can be achieved by decreasing the mixing costs and circulation between different production steps, or by improving the efficiency of the anaerobic process under controlled conditions. This new bioenergy generating process strongly competes with others biofuel productions.     

A comparison of algal,macroinvertebrate, and fish assemblage indices for assessing low-level nutrient enrichment in wadeable Ozark streams

Biotic indices for algae, macroinvertebrates, and fish assemblages can be effective for monitoring stream enrichment, but little is known regarding the value of the three assemblages for detecting perturbance as a consequence of low-level nutrient enrichment. In the summer of 2006, we collected nutrient and biotic samples from 30 wadeable Ozark streams that spanned a nutrient-concentration gradient from reference to moderately enriched conditions. Seventy-three algal metrics, 62 macroinvertebrate metrics, and 60 fish metrics were evaluated for each of the three biotic indices. After a group of candidate metrics had been identified with multivariate analysis, correlation procedures and scatter plots were used to identify the four metrics having strongest relations to a nutrient index calculated from log transformed and normalized total nitrogen and total phosphorus concentrations. The four metrics selected for each of the three biotic indices were: algae—the relative abundance of most tolerant diatoms, the combined relative abundance of three species of Cymbella, mesosaprobic algae percent taxa richness, and the relative abundance of diatoms that are obligate nitrogen heterotrophs; macroinvertebrate—the relative abundance of intolerant organisms, Baetidae relative abundance, moderately tolerant taxa richness, and insect biomass; fish—herbivore and detritivore taxa richness, pool species relative abundance, fish catch per unit effort, and black bass (Micropterus spp.) relative abundance.All three biotic indices were negatively correlated to nutrient concentrations but the algal index had a higher correlation (rho = ?0.89) than did the macroinvertebrate and fish indices (rho = ?0.63 and ?0.58, respectively). Biotic index scores were lowest and nutrient concentrations were highest for streams with basins having the highest poultry and cattle production. Because of the availability of litter for fertilizer and associated increases in grass and hay production, cattle feeding capacity increases with poultry production. Studies are needed that address the synergistic effect of poultry and cattle production on Ozark streams in high production areas before ecological risks can be adequately addressed.     

Potential for optimized production and use of rapeseed biodiesel. Based on a comprehensive real-time LCA case study in Denmark with multiple pathways

Purpose

Several factors contribute to the current increased focus on alternative fuels such as biodiesel, including an increasing awareness of the environmental impact of petrochemical (PC) oil products such as PC diesel, the continuously increasing price of PC oil, and the depletion of PC oil. For these reasons, the European Union has enacted a directive requiring each member state to ensure that the share of energy from renewable sources in transport be at least 10 % of the final consumption of energy by 2020 (The European Parliament and the Council 2009). This LCA study assesses the specific environmental impacts from the production and use of biodiesel as it is today (real-time), based on rapeseed oil and different types of alcohols, and using technologies that are currently available or will be available shortly. Different options are evaluated for the environmental improvement of production methods. The modeling of the LCA is based on a specific Danish biodiesel production facility.

Methods

The functional unit is “1,000 km transportation for a standard passenger car.” All relevant process stages are included, such as rapeseed production including carbon sequestration and N₂O balances, and transportation of products used in the life cycle of biodiesel. System expansion has been used to handle allocation issues.

Results and discussion

The climate change potential from the production and use of biodiesel today is 57 kg CO₂-eq/1,000 km, while PC diesel is 214 kg CO₂-eq/1,000 km. Options for improvement include the increased use of residual straw from rapeseed fields for combustion in a power plant where carbon sequestration is considered, and a change in transesterification from a conventional process to an enzymatic process when using bioethanol instead of PC methanol. This research also evaluates results for land use, respiratory inorganics potential, human toxicity (carc) potential, ecotoxicity (freshwater) potential, and aquatic eutrophication (N) potential. Different sources for uncertainty are evaluated, and the largest drivers for uncertainty are the assumptions embedded into the substitution effects. The results presented should not be interpreted as a blueprint for the increased production of biodiesel but rather as a benchmarking point for the present, actual impact in a well-to-wheels perspective of biodiesel, with options for improving production and use.

Conclusions

Based on this analysis, we recommend investigating additional options and incentives regarding the increased use of rape straw, particularly considering the carbon sequestration issues (from the perspective of potential climate change) of using bioalcohol instead of PC alcohol for the transesterification process.     

Microalgae Versus Land Crops as Feedstock for Biodiesel: Productivity,Quality, and Standard Compliance

Despite certain environmental advantages over fossil diesel, land crop-derived biodiesels may not satisfy the increasing worldwide demand for transportation fuels. As an abundant photosynthesizer, algae could be an adequate surrogate for biodiesel production. Nevertheless, high production costs, scarce selected species, and inaccurate assumptions about production yields represent industrial uncertainties. In this study, a reliable approach to analyzing algal biodiesel production has been developed based on species-to-species variations in oil productivity and quality. This approach compares biodiesels from Chlorophyta strains with land crop feedstock according to (i) potential yields, (ii) oil quality, and (iii) compliance with biodiesel quality standards. Algal yields were assessed by (i) extrapolating the strain-specific laboratory results to commercial-scale growth systems; (ii) converting volumetric to areal biomass productivity; and (iii) estimating oil yields for each strain, as the product of their projected areal biomass productivity for each growth system, and the oil percentage in biomass as determined in the laboratory. Biodiesel fuel properties were estimated by using fatty acid methyl ester profile predictive models. The Chlorophyta strains in this study provided annual oil yields that were generally higher than those of land crops by one order of magnitude. Six strains yielding more than 40 mg oil l^?1 day^?1 were identified as adequate for sustaining biodiesel production. Trebouxiophyceae algae were the most productive. Critical biodiesel parameters from both feedstock types suggest that most microalgae-derived biodiesels meet international fuel quality standards with better values than those of land crops. Because some of the highly productive feedstock does not simultaneously meet all the standards for a high quality biodiesel, optimization solutions are discussed.     

A new dawn for industrial photosynthesis

Several emerging technologies are aiming to meet renewable fuel standards, mitigate greenhouse gas emissions, and provide viable alternatives to fossil fuels. Direct conversion of solar energy into fungible liquid fuel is a particularly attractive option, though conversion of that energy on an industrial scale depends on the efficiency of its capture and conversion. Large-scale programs have been undertaken in the recent past that used solar energy to grow innately oil-producing algae for biomass processing to biodiesel fuel. These efforts were ultimately deemed to be uneconomical because the costs of culturing, harvesting, and processing of algal biomass were not balanced by the process efficiencies for solar photon capture and conversion. This analysis addresses solar capture and conversion efficiencies and introduces a unique systems approach, enabled by advances in strain engineering, photobioreactor design, and a process that contradicts prejudicial opinions about the viability of industrial photosynthesis. We calculate efficiencies for this direct, continuous solar process based on common boundary conditions, empirical measurements and validated assumptions wherein genetically engineered cyanobacteria convert industrially sourced, high-concentration CO₂ into secreted, fungible hydrocarbon products in a continuous process. These innovations are projected to operate at areal productivities far exceeding those based on accumulation and refining of plant or algal biomass or on prior assumptions of photosynthetic productivity. This concept, currently enabled for production of ethanol and alkane diesel fuel molecules, and operating at pilot scale, establishes a new paradigm for high productivity manufacturing of nonfossil-derived fuels and chemicals.     

Mechanism of Algal Aggregation by Bacillus sp. Strain RP1137

Alga-derived biofuels are one of the best alternatives for economically replacing liquid fossil fuels with a fungible renewable energy source. Production of fuel from algae is technically feasible but not yet economically viable. Harvest of dilute algal biomass from the surrounding water remains one of the largest barriers to economic production of algal biofuel. We identified Bacillus sp. strain RP1137 in a previous study and showed that this strain can rapidly aggregate several biofuel-producing algae in a pH- and divalent-cation-dependent manner. In this study, we further characterized the mechanism of algal aggregation by RP1137. We show that aggregation of both algae and bacteria is optimal in the exponential phase of growth and that the density of ionizable residues on the RP1137 cell surface changes with growth stage. Aggregation likely occurs via charge neutralization with calcium ions at the cell surface of both algae and bacteria. We show that charge neutralization occurs at least in part through binding of calcium to negatively charged teichoic acid residues. The addition of calcium also renders both algae and bacteria more able to bind to hydrophobic beads, suggesting that aggregation may occur through hydrophobic interactions. Knowledge of the aggregation mechanism may enable engineering of RP1137 to obtain more efficient algal harvesting.     

Phycoremediation coupled production of algal biomass,harvesting and anaerobic digestion: Possibilities and challenges

Biogas produced from anaerobic digestion is a versatile and environment friendly fuel which traditionally utilizes cattle dung as the substrate. In the recent years, owing to its high content of biodegradable compounds, algal biomass has emerged as a potential feedstock for biogas production. Moreover, the ability of algae to treat wastewater and fix CO₂ from waste gas streams makes it an environmental friendly and economically feasible feedstock. The present review focuses on the possibility of utilizing wastewater as the nutrient and waste gases as the CO₂ source for algal biomass production and subsequent biogas generation. Studies describing the various harvesting methods of algal biomass as well as its anaerobic digestion have been compiled and discussed. Studies targeting the most recent advancements on biogas enrichment by algae have been discussed. Apart from highlighting the various advantages of utilizing algal biomass for biogas production, limitations of the process such as cell wall resistivity towards digestion and inhibitions caused due to ammonia toxicity and the possible strategies for overcoming the same have been reviewed. The studies compiled in the present review indicate that if the challenges posed in translating the lab scale studies on phycoremediation and biogas production to pilot scale are overcome, algal biogas could become the sustainable and economically feasible source of renewable energy.     

Fermentation of de-oiled algal biomass by <Emphasis Type="Italic">Lactobacillus casei</Emphasis> for production of lactic acid

De-oiled algal biomass (algal cake) generated as waste byproduct during algal biodiesel production is a promising fermentable substrate for co-production of value-added chemicals in biorefinery systems. We explored the ability of Lactobacillus casei 12A to ferment algal cake for co-production of lactic acid. Carbohydrate and amino acid availability were determined to be limiting nutritional requirements for growth and lactic acid production by L. casei. These nutritional requirements were effectively addressed through enzymatic hydrolysis of the algal cake material using α-amylase, cellulase (endo-1,4-β-d-glucanase), and pepsin. Results confirm fermentation of algal cake for production of value-added chemicals is a promising avenue for increasing the overall cost competiveness of the algal biodiesel production process.     

Rapid estimation of lipid content in an Antarctic ice alga (Chlamydomonas sp.) using the lipophilic fluorescent dye BODIPY505/515

Chlamydomonas sp. ICE-L, isolated from Antarctic coastal marine environments, was selected as a high lipid producer, which may be useful for biodiesel production. The lipophilic fluorescent dye BODIPY505/515 was used to determine the algal lipid content. Lipid bodies stained with BODIPY505/515 have a characteristic green fluorescence, and their volumes were determined using the sphere volume formula. In this study, lipid accumulation by Chlamydomonas ICE-L was analyzed under different cultivation conditions (nitrogen deficiency and UV-B radiation). The results demonstrated that nitrogen deficiency and UV-B radiation could significantly promote the accumulation of lipid content per cell. The highest yields of total lipid content (reaching 84?μL?L^?1) were obtained in full Provasoli medium after 12?days of cultivation, but not in the nitrogen-deficient medium. The inoculum used in this experiment was obtained from the late-exponential growth phase. The main reason was that the cell numbers in nitrogen-deficient medium had not increased and total lipid contents were offset by the lower growth rate. Considering the high lipid content in Chlamydomonas sp. ICE-L, this alga might be a promising alternative species for production of microalgal oil for the production of renewable biodiesel in the future.     

Microplate assay for quantitation of neutral lipids in extracts from microalgae

Lipid quantitation is widespread in the algae literature, but popular methods such as gravimetry, gas chromatography and mass spectrometry (GC–MS), and Nile red cell staining suffer drawbacks, including poor quantitation of neutral lipids, expensive equipment, and variable results among algae species, respectively. A high-throughput microplate assay was developed that uses Nile red dye to quantify neutral lipids that have been extracted from algae cells. Because the algal extracts contained pigments that quenched Nile red fluorescence, a mild bleach solution was used to destroy pigments, resulting in a nearly linear response for lipid quantities in the range of 0.75 to 40 μg. Corn oil was used as a standard for quantitation, although other vegetable oils displayed a similar response. The assay was tested on lipids extracted from three species of Chlorella and resulted in close agreement with triacylglycerol (TAG) levels determined by thin layer chromatography. The assay was found to more accurately measure algal lipids conducive to biodiesel production and nutrition applications than the widely used gravimetric assay. Assay response was also consistent among different species, in contrast to Nile red cell staining procedures.     

Second Generation Biofuels: High-Efficiency Microalgae for Biodiesel Production

The use of fossil fuels is now widely accepted as unsustainable due to depleting resources and the accumulation of greenhouse gases in the environment that have already exceeded the “dangerously high” threshold of 450 ppm CO₂-e. To achieve environmental and economic sustainability, fuel production processes are required that are not only renewable, but also capable of sequestering atmospheric CO₂. Currently, nearly all renewable energy sources (e.g. hydroelectric, solar, wind, tidal, geothermal) target the electricity market, while fuels make up a much larger share of the global energy demand (～66%). Biofuels are therefore rapidly being developed. Second generation microalgal systems have the advantage that they can produce a wide range of feedstocks for the production of biodiesel, bioethanol, biomethane and biohydrogen. Biodiesel is currently produced from oil synthesized by conventional fuel crops that harvest the sun’s energy and store it as chemical energy. This presents a route for renewable and carbon-neutral fuel production. However, current supplies from oil crops and animal fats account for only approximately 0.3% of the current demand for transport fuels. Increasing biofuel production on arable land could have severe consequences for global food supply. In contrast, producing biodiesel from algae is widely regarded as one of the most efficient ways of generating biofuels and also appears to represent the only current renewable source of oil that could meet the global demand for transport fuels. The main advantages of second generation microalgal systems are that they: (1) Have a higher photon conversion efficiency (as evidenced by increased biomass yields per hectare): (2) Can be harvested batch-wise nearly all-year-round, providing a reliable and continuous supply of oil: (3) Can utilize salt and waste water streams, thereby greatly reducing freshwater use: (4) Can couple CO₂-neutral fuel production with CO₂ sequestration: (5) Produce non-toxic and highly biodegradable biofuels. Current limitations exist mainly in the harvesting process and in the supply of CO₂ for high efficiency production. This review provides a brief overview of second generation biodiesel production systems using microalgae.     

Microalgae biofuel potentials (Review)

With the decrease of fossil based fuels and the environmental impact of them over the planet, it seems necessary to seek the sustainable sources of clean energy. Biofuels, is becoming a worldwide leader in the development of renewable energy resources. It is worthwhile to say that algal biofuel production is thought to help stabilize the concentration of carbon dioxide in the atmosphere and decrease global warming impacts. Also, among algal fuels’ attractive characteristics, algal biodiesel is non toxic, with no sulfur, highly biodegradable and relatively harmless to the environment if spilled. Algae are capable of producing in excess of 30 times more oil per acre than corn and soybean crops. Currently, algal biofuel production has not been commercialized due to high costs associated with production, harvesting and oil extraction but the technology is progressing. Extensive research was conducted to determine the utilization of microalgae as an energy source and make algae oil production commercially viable.