Potential application of cyclic lipopeptide biosurfactants produced by Bacillus subtilis strains in laundry detergent formulations

AIMS: Crude cyclic lipopeptide (CLP) biosurfactants from two Bacillus subtilis strains (DM-03 and DM-04) were studied for their compatibility and stability with some locally available commercial laundry detergents. METHODS AND RESULTS: CLP biosurfactants from both B. subtilis strains were stable over the pH range of 7.0-12.0, and heating them at 80 degrees C for 60 min did not result in any loss of their surface-active property. Crude CLP biosurfactants showed good emulsion formation capability with vegetable oils, and demonstrated excellent compatibility and stability with all the tested laundry detergents. CONCLUSION: CLP biosurfactants from B. subtilis strains act additively with other components of the detergents to further improve the wash quality of detergents. The thermal resistance and extreme alkaline pH stability of B. subtilis CLP biosurfactants favour their inclusion in laundry detergent formulations. SIGNIFICANCE AND IMPACT OF THE STUDY: This study has great significance because it is already known that microbial biosurfactants are considered safer alternative to chemical or synthetic surfactants owing to lower toxicity, ease of biodegradability and low ecological impact. The present study provides further evidence that CLP biosurfactants from B. subtilis strains can be employed in laundry detergents.     

Efficacy of lipase from Aspergillus niger as an additive in detergent formulations: a statistical approach

The efficacy of lipase from Aspergillus niger MTCC 2594 as an additive in laundry detergent formulations was assessed using response surface methodology (RSM). A five-level four-factorial central composite design was chosen to explain the washing protocol with four critical factors, viz. detergent concentration, lipase concentration, buffer pH and washing temperature. The model suggested that all the factors chosen had a significant impact on oil removal and the optimal conditions for the removal of olive oil from cotton fabric were 1.0% detergent, 75 U of lipase, buffer pH of 9.5 and washing temperature of 25°C. Under optimal conditions, the removal of olive oil from cotton fabric was 33 and 17.1% at 25 and 49°C, respectively, in the presence of lipase over treatment with detergent alone. Hence, lipase from A. niger could be effectively used as an additive in detergent formulation for the removal of triglyceride soil both in cold and warm wash conditions.     

Simultaneous phenanthrene and cadmium removal from contaminated soil by a ligand/biosurfactant solution

Surfactants and inorganic ligands are pointed as efficient to simultaneous removal of heavy metals and hydrophobic organic pollutants from soil. However, the biosurfactants are potentially less toxic to soil organisms than other chemical agents. Thus, in this study the efficiency of combinations of iodide (I⁻) ligand and surfactants produced by different bacterial species in the simultaneous removal of cadmium (Cd²⁺) and phenanthrene in a Haplustox soil sample was investigated. Four microbial surfactants and the synthetic surfactant Triton X-100 were tested with different concentrations of ligand. Soil samples contaminated with Cd²⁺ and phenanthrene underwent consecutive washings with a surfactant/ligand solution. The removal of Cd²⁺ increased with increased ligand concentration, particularly in solutions containing biosurfactants produced by the bacterial strains Bacillus subtilis LBBMA155 (lipopeptide) and Flavobacterium sp. LBBMA168 (mixture of flavolipids) and Triton X-100. Maximum Cd²⁺ removal efficiency was 99.2% for biosurfactant produced by Arthrobacter oxydans LBBMA 201 (lipopeptide) and 99.2% for biosurfactant produced by Bacillus sp. LBBMA111A (mixed lipopeptide) in the presence of 0.336 mol iodide l⁻¹, while the maximum efficiency of Triton X-100 removal was 65.0%. The biosurfactant solutions removed from 80 to 88.0% of phenanthrene in soil, and the removal was not influenced by the presence of the ligand. Triton X-100 removed from 73 to 88% of the phenanthrene and, differently from the biosurfactants, iodide influenced the removal efficiency. The results indicate that the use of a single washing agent, called surfactant-ligand, affords simultaneous removal of organic contaminants and heavy metals.     

Antimicrobial potential of a lipopeptide biosurfactant derived from a marine Bacillus circulans

Aims: To isolate the biologically active fraction of the lipopeptide biosurfactant produced by a marine Bacillus circulans and study its antimicrobial potentials. Methods and Results: The marine isolate B. circulans was cultivated in glucose mineral salts medium and the crude biosurfactant was isolated by chemical isolation method. The crude biosurfactants were solvent extracted with methanol and the methanol extract was subjected to reverse phase high‐performance liquid chromatography (HPLC). The crude biosurfactants resolved into six major fractions in HPLC. The sixth HPLC fraction eluting at a retention time of 27·3 min showed the maximum surface tension‐reducing property and reduced the surface tension of water from 72 mNm^?1 to 28 mNm^?1. Only this fraction was found to posses bioactivity and showed a pronounced antimicrobial action against a panel of Gram‐positive and Gram‐negative pathogenic and semi‐pathogenic micro‐organisms including a few multidrug‐resistant (MDR) pathogenic clinical isolates. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of this antimicrobial fraction of the biosurfactant were determined for these test organisms. The biosurfactant was found to be active against Gram‐negative bacteria such as Proteus vulgaris and Alcaligens faecalis at a concentration as low as 10 μg ml^?1. The biosurfactant was also active against methicillin‐resistant Staphylococcus aureus (MRSA) and other MDR pathogenic strains. The chemical identity of this bioactive biosurfactant fraction was determined by post chromatographic detection using thin layer chromatography (TLC) and also by Fourier transform infrared (FTIR) spectroscopy. The antimicrobial HPLC fraction resolved as a single spot on TLC and showed positive reaction with ninhydrin, iodine and rhodamine‐B reagents, indicating its lipopeptide nature. IR absorption by this fraction also showed similar and overlapping patterns with that of other lipopeptide biosurfactants such as surfactin and lichenysin, proving this biosurfactant fraction to be a lipopeptide. The biosurfactant did not show any haemolytic activity when tested on blood agar plates, unlike the lipopeptide biosurfactant surfactin produced by Bacillus subtilis. Conclusions: The biosurfactant produced by marine B. circulans had a potent antimicrobial activity against Gram‐positive and Gram‐negative pathogenic and semi‐pathogenic microbial strains including MDR strains. Only one of the HPLC fractions of the crude biosurfactants was responsible for its antimicrobial action. The antimicrobial lipopeptide biosurfactant fraction was also found to be nonhaemolytic in nature. Significance and impact of the study: This work presents a nonhaemolytic lipopeptide biosurfactant produced by a marine micro‐organism possessing a pronounced antimicrobial action against a wide range of bacteria. There is a high demand for new antimicrobial agents because of the increased resistance shown by pathogenic micro‐organisms against the existing antimicrobial drugs. This study provides an insight into the search of new bioactive molecules from marine micro‐organisms.     

Restricting detergent protease action to surface of protein fibres by chemical modification

Due to their excellent properties, such as thermostability, activity over a broad range of pH and efficient stain removal, proteases from Bacillus sp. are commonly used in the textile industry including industrial processes and laundry and represent one of the most important groups of enzymes. However, due to the action of proteases, severe damage on natural protein fibres such as silk and wool result after washing with detergents containing proteases. To include the benefits of proteases in a wool fibre friendly detergent formulation, the soluble polymer polyethylene glycol (PEG) was covalently attached to a protease from Bacillus licheniformis. In contrast to activation of PEG with cyanuric chloride (50%) activation with 1,1′-carbonyldiimidazole (CDI) lead to activity recovery above 90%. With these modified enzymes, hydrolytic attack on wool fibres could be successfully prevented up to 95% compared to the native enzymes. Colour difference (ΔE) measured in the three dimensional colour space showed good stain removal properties for the modified enzymes. Furthermore, half-life of the modified enzymes in buffers and commercial detergents solutions was nearly twice as high as those of the non-modified enzymes with values of up to 63 min. Out of the different modified proteases especially the B. licheniformis protease with the 2.0-kDa polymer attached both retained stain removal properties and did not hydrolyse/damage wool fibres.     

Oil removal from used sorbents using a biosurfactant

Oil spills impose serious damage on the environment. Mechanical recovery by the help of oil sorbents is one of the most important countermeasures in oil spill response. Most sorbents, however, end up in landfills or in incineration after a single use. These options either produce another source of pollution or increase the oil recovery cost. In this study a biosurfactant was used to clean used oil sorbents. This use of biosurfactants is new. Washing parameters tested included sorbent type, washing time, surfactant dosage and temperature. It was found that with biosurfactant washing more than 95% removal of the oil from sorbents was achieved, depending on the washing conditions. Biosurfactants were found to have considerable potential for recycling the used sorbents.     

Bacterial biosurfactant increases ex situ biodiesel bioremediation in clayey soil

The contamination of soils by oily compounds has several environmental impacts, which can be reversed through bioremediation, using biosurfactants as auxiliaries in the biodegradation process. In this study, we aimed to perform ex situ bioremediation of biodiesel-contaminated soil using biosurfactants produced by Bacillus methylotrophicus. A crude biosurfactant was produced in a whey-based culture medium supplemented with nutrients and was later added to biodiesel-contaminated clayey soil. The produced lipopeptide biosurfactant could reduce the surface tension of the fermentation broth to 30.2 mN/m. An increase in the microbial population was observed in the contaminated soil; this finding can be corroborated by the finding of increased CO₂ release over days of bioremediation. Compared with natural attenuation, the addition of a lower concentration of the biosurfactant (0.5% w/w in relation to the mass of diesel oil) to the soil increased biodiesel removal by about 16% after 90 days. The added biosurfactant did not affect the retention of the contaminant in the soil, which is an important factor to be considered when applying in situ bioremediation technologies.

     

In situ biosurfactant production by Bacillus strains injected into a limestone petroleum reservoir

Biosurfactant-mediated oil recovery may be an economic approach for recovery of significant amounts of oil entrapped in reservoirs, but evidence that biosurfactants can be produced in situ at concentrations needed to mobilize oil is lacking. We tested whether two Bacillus strains that produce lipopeptide biosurfactants can metabolize and produce their biosurfactants in an oil reservoir. Five wells that produce from the same Viola limestone formation were used. Two wells received an inoculum (a mixture of Bacillus strain RS-1 and Bacillus subtilis subsp. spizizenii NRRL B-23049) and nutrients (glucose, sodium nitrate, and trace metals), two wells received just nutrients, and one well received only formation water. Results showed in situ metabolism and biosurfactant production. The average concentration of lipopeptide biosurfactant in the produced fluids of the inoculated wells was about 90 mg/liter. This concentration is approximately nine times the minimum concentration required to mobilize entrapped oil from sandstone cores. Carbon dioxide, acetate, lactate, ethanol, and 2,3-butanediol were detected in the produced fluids of the inoculated wells. Only CO(2) and ethanol were detected in the produced fluids of the nutrient-only-treated wells. Microbiological and molecular data showed that the microorganisms injected into the formation were retrieved in the produced fluids of the inoculated wells. We provide essential data for modeling microbial oil recovery processes in situ, including growth rates (0.06 +/- 0.01 h(-1)), carbon balances (107% +/- 34%), biosurfactant production rates (0.02 +/- 0.001 h(-1)), and biosurfactant yields (0.015 +/- 0.001 mol biosurfactant/mol glucose). The data demonstrate the technical feasibility of microbial processes for oil recovery.     

Enhanced Removal of Lead from Soil Using Biosurfactant Derived from Edible Oils

ABSTRACT

Lead contamination in soil due to anthropogenic activities has amplified and therefore, remediation is of prime significance due to its nonbiodegradability and toxicity effects. This study focuses on lead removal from the soil collected from a rifle range using biosurfactants produced from native microorganisms and edible oils. Native microorganisms in contaminated soil served as a source for biosurfactant production aided by edible vegetable oils such as palm oil and gingelly oil. Preliminary isolation and characterization studies indicated the presence of Pseudomonas aeruginosa that produced biosurfactant and removed lead simultaneously. Batch adsorption experiments showed 96%–99.6% of lead adsorption following Langmuir isotherm model. Lead desorption of 23.6% occurred without biosurfactant. Whereas in the presence of biosurfactants, enhanced desorption of 62.3% was observed. Of both palm oil and gingelly oil derived biosurfactants, the former reached a lead removal efficiency of 93.6% indicating the feasibility and effectiveness of the biosurfactants for contaminated site remediation.     

Basis for formulating biosurfactant mixtures to achieve ultra low interfacial tension values against hydrocarbons

Biosurfactants could potentially replace or be used in conjunction with synthetic surfactants to provide for more cost-effective subsurface remediation. The design of surfactant formulations that are effective in lowering interfacial tension (IFT), which is necessary to mobilize entrapped hydrocarbons, requires information about the surface-active agent (surfactant) and the targeted non-aqueous phase liquids (NAPL). We hypothesized that biosurfactant and synthetic surfactant mixtures can be formulated to provide the appropriate hydrophobic/hydrophilic conditions necessary to produce low IFT against NAPLs, and that such mixtures will produce synergism that make them more effective than individual biosurfactants or synthetic surfactants. Our work tested the interfacial activity of biosurfactants from individual strains and mixtures of biosurfactants from different strains with and without a synthetic surfactant. Multiple regression analysis showed that, for lipopeptide biosurfactants produced by various Bacillus species, the interfacial activity against toluene depended on the relative proportions of 3-OH-C₁₄, C₁₅, C₁₆, and C₁₈ in the fatty acid tail. As the fatty acid composition became more heterogeneous the system produced lower IFT against toluene. In mixtures of lipopeptide biosurfactants with the more hydrophilic, rhamnolipid biosurfactant, the IFT against toluene decreased as the percentage of the 3-OH C₁₄ fatty acid increased in the lipopeptide. Mixtures of lipopeptide biosurfactants with the more hydrophobic synthetic surfactant, C12, C13-8PO SO₄Na, were able to produce low IFT against hexane and decane. In general, we found that lipopeptide biosurfactants with a heterogeneous fatty acid composition or mixtures of lipopeptide and rhamnolipid biosurfactants lowered the IFT against hydrophilic NAPLs. Conversely, mixtures of lipopeptide biosurfactants with a more hydrophobic synthetic surfactant lowered the IFT against hydrophobic NAPLs.     

A thiol-activated lipase from <Emphasis Type="Italic">Trichosporon asahii</Emphasis> MSR 54: detergent compatibility and presoak formulation for oil removal from soiled cloth at ambient temperature

An alkaline lipase from Trichosporon asahii MSR 54 was used to develop presoak formulation for removing oil stains at ambient temperature. The lipase was produced in a reactor followed by concentration by ultrafiltration and then it was dried with starch. The biochemical characteristics of enzyme showed that it was an alkaline lipase having pH activity in the range of pH 8.0–10.0 and temperature in the range of 25–50°C. The present lipase was active >80% at 25°C. The lipase was cystein activated with fourfold enhancement in presence of 5 mM cystein and likewise the activity was also stimulated in presence of papain hydrolysate which served as source of cystein. The presoak formulation consisted of two components A and B, component A was enzyme additive and B was a mixture of carbonate/bicarbonate source of alkali and papain hydrolysate as source of cystein. The results indicated that the presoaking in enzyme formulation followed by detergent washing was a better strategy for stain removal than direct washing with detergent in presence of lipase. Further, it was observed that 0.25% presoak component B in presence of 100 U enzyme component A (0.1 g) was the best formulation in removing maximum stain from mustard oil/triolein soiled clothes as indicated by increase in reflectance which was found equal to that of control cloth. The lipase action in presoaked formulation was clearly indicated by quantitated fatty acid release and also the TLC results of wash water, where oil hydrolytic products were visible only in presence of enzyme in the treatment. The wash performance carried at 25°C indicated that washing at 25°C was at par with that at 40°C as indicated by similar reflectance of the washed cloth piece though qualitative fatty acid release was higher at 40°C.     

Isolation and characterization of a biosurfactant‐producing Fusarium sp. BS‐8 from oil contaminated soil

This study reports characterization of a biosurfactant‐producing fungal isolate from oil contaminated soil of Missa Keswal oil field, Pakistan. It was identified as Fusarium sp. BS‐8 on the basis of macroscopic and microscopic morphology, and 18S rDNA gene sequence homology. The biosurfactant‐producing capability of the fungal isolates was screened using oil displacement activity, emulsification index assay, and surface tension (SFT) measurement. The optimization of operational parameters and culture conditions resulted in maximum biosurfactant production using 9% (v/v) inoculum at 30°C, pH 7.0, using sucrose and yeast extract, as carbon and nitrogen sources, respectively. A C:N ratio of 0.9:0.1 (w/w) was found to be optimum for growth and biosurfactant production. At optimal conditions, it attained lowest SFT (i.e., 32 mN m^?1) with a critical micelle concentration of ≥ 1.2 mg mL^?1. During 5 L shake flask fermentation experiments, the biosurfactant productivity was 1.21 g L^?1 pure biosurfactant having significant emulsifying index (E₂₄, 70%) and oil‐displacing activity (16 mm). Thin layer chromatography and Fourier transform infrared spectrometric analyses indicated a lipopeptide type of the biosurfactant. The Fusarium sp. BS‐8 has substantial potential of biosurfactant production, yet it needs to be fully characterized with possibility of relatively new class of biosurfactants. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1065–1075, 2014     

In Situ Biosurfactant Production by Bacillus Strains Injected into a Limestone Petroleum Reservoir

Biosurfactant-mediated oil recovery may be an economic approach for recovery of significant amounts of oil entrapped in reservoirs, but evidence that biosurfactants can be produced in situ at concentrations needed to mobilize oil is lacking. We tested whether two Bacillus strains that produce lipopeptide biosurfactants can metabolize and produce their biosurfactants in an oil reservoir. Five wells that produce from the same Viola limestone formation were used. Two wells received an inoculum (a mixture of Bacillus strain RS-1 and Bacillus subtilis subsp. spizizenii NRRL B-23049) and nutrients (glucose, sodium nitrate, and trace metals), two wells received just nutrients, and one well received only formation water. Results showed in situ metabolism and biosurfactant production. The average concentration of lipopeptide biosurfactant in the produced fluids of the inoculated wells was about 90 mg/liter. This concentration is approximately nine times the minimum concentration required to mobilize entrapped oil from sandstone cores. Carbon dioxide, acetate, lactate, ethanol, and 2,3-butanediol were detected in the produced fluids of the inoculated wells. Only CO₂ and ethanol were detected in the produced fluids of the nutrient-only-treated wells. Microbiological and molecular data showed that the microorganisms injected into the formation were retrieved in the produced fluids of the inoculated wells. We provide essential data for modeling microbial oil recovery processes in situ, including growth rates (0.06 ± 0.01 h⁻¹), carbon balances (107% ± 34%), biosurfactant production rates (0.02 ± 0.001 h⁻¹), and biosurfactant yields (0.015 ± 0.001 mol biosurfactant/mol glucose). The data demonstrate the technical feasibility of microbial processes for oil recovery.     

Utility of subtilisin GX as a detergent additive

Subtilisin GX, purified from alkalophilic Bacillus sp. GX6644 (ATCC 53441), was assessed for its ability to augment detergencies of commercial laundry products. The addition of the alkaline protease to detergent compositions resulted in significant increases in the removal of proteinaceous stains from a standard soiled fabric during Tergotometer wash tests. The enzyme was effective in liquid and powdered detergent formulations and functional over a wide pH and temperature range. The results indicate that the alkaline protease from Bacillus sp. GX6644 possesses properties suitable as a detergent additive.     

Importance of 3-hydroxy fatty acid composition of lipopeptides for biosurfactant activity

Biosurfactant production may be an economic approach to improving oil recovery. To obtain candidates most suitable for oil recovery, 207 strains, mostly belonging to the genus Bacillus, were tested for growth and biosurfactant production in medium with 5% NaCl under aerobic and anaerobic conditions. All strains grew aerobically with 5% NaCl, and 147 strains produced a biosurfactant. Thirty-five strains grew anaerobically with 5% NaCl, and two produced a biosurfactant. In order to relate structural differences to activity, eight lipopeptide biosurfactants with different specific activities produced by various Bacillus species were purified by a new protocol. The amino acid compositions of the eight lipopeptides were the same (Glu/Gln:Asp/Asn:Val:Leu, 1:1:1:4), but the fatty acid compositions differed. Multiple regression analysis showed that the specific biosurfactant activity depended on the ratios of both iso to normal even-numbered fatty acids and anteiso to iso odd-numbered fatty acids. A multiple regression model accurately predicted the specific biosurfactant activities of four newly purified biosurfactants (r2= 0.91). The fatty acid composition of the biosurfactant produced by Bacillus subtilis subsp. subtilis strain T89-42 was altered by the addition of branched-chain amino acids to the growth medium. The specific activities of biosurfactants produced in cultures with different amino acid additions were accurately predicted by the multiple regression model derived from the fatty acid compositions (r2= 0.95). Our work shows that many strains of Bacillus mojavensis and Bacillus subtilis produce biosurfactants and that the fatty acid composition is important for biosurfactant activity.     

Importance of 3-Hydroxy Fatty Acid Composition of Lipopeptides for Biosurfactant Activity

Biosurfactant production may be an economic approach to improving oil recovery. To obtain candidates most suitable for oil recovery, 207 strains, mostly belonging to the genus Bacillus, were tested for growth and biosurfactant production in medium with 5% NaCl under aerobic and anaerobic conditions. All strains grew aerobically with 5% NaCl, and 147 strains produced a biosurfactant. Thirty-five strains grew anaerobically with 5% NaCl, and two produced a biosurfactant. In order to relate structural differences to activity, eight lipopeptide biosurfactants with different specific activities produced by various Bacillus species were purified by a new protocol. The amino acid compositions of the eight lipopeptides were the same (Glu/Gln:Asp/Asn:Val:Leu, 1:1:1:4), but the fatty acid compositions differed. Multiple regression analysis showed that the specific biosurfactant activity depended on the ratios of both iso to normal even-numbered fatty acids and anteiso to iso odd-numbered fatty acids. A multiple regression model accurately predicted the specific biosurfactant activities of four newly purified biosurfactants (r² = 0.91). The fatty acid composition of the biosurfactant produced by Bacillus subtilis subsp. subtilis strain T89-42 was altered by the addition of branched-chain amino acids to the growth medium. The specific activities of biosurfactants produced in cultures with different amino acid additions were accurately predicted by the multiple regression model derived from the fatty acid compositions (r² = 0.95). Our work shows that many strains of Bacillus mojavensis and Bacillus subtilis produce biosurfactants and that the fatty acid composition is important for biosurfactant activity.     

Microbial biosurfactant mediated removal and/or solubilization of crude oil contamination from soil and aqueous phase: An approach with Bacillus licheniformis MTCC 5514

This study highlights the role of marine microbial biosurfactants on solubilization/removal of crude-oil contamination from four different soils in an aqueous phase. Soil of four different types, viz., sandy, fine sand soil, clay, and clay loam, were collected and saturated with crude oil. Marine isolate MTCC 5514 (Bacillus licheniformis) was chosen for the study and comparisons were made with synthetic surfactants and commercially available biosurfactant. In-situ studies were carried out with different percentages of crude oil to assess the growth and the percentage removal of oil. For ex-situ studies, soils were pre-saturated with crude oil and then treated with the chosen biosurfactant at a 10% concentration level using flask and column methods. After time intervals of 30–120 min, samples were collected and then subjected to extraction with hexane and the percentage removal was calculated. Results revealed, at 2% concentration of crude oil, that complete solubilization was achieved. With regard to ex-situ studies, clay soil absorbed the maximum percentage of oil compared to other soil types, and with regard to the removal, all the synthetic surfactants showed <60% removal irrespective of soil type. In the case of biosurfactants even at 10% concentration, >85% removal was achieved.     

Detergent Formulations for Wool Domestic Washings Containing Immobilized Enzymes

The stability of immobilized and native Esperase, a commercial serine protease, was studied by incubating the enzymes in four formulations containing the same amount of anionic and non-ionic surfactants. The results show that the activity of the immobilized enzyme is not affected by the presence of detergents while the native enzyme lost 50% of activity after 20 min of incubation in these four formulations. The washing performance of the detergents prepared with the immobilized Esperase was studied on cotton and wool fabric samples stained with human blood and egg yolk, using as control the detergent containing native Esperase. The best stain removal for cotton samples stained with human blood was achieved using the detergent with immobilized Esperase. Several physical tests confirmed that wool keratin was not degraded by the immobilized Esperase, validating the ability to use formulated detergents containing this immobilized enzyme for safe wool domestic washing.     

Purification and partial characterization of a detergent and oxidizing agent stable alkaline protease from a newly isolated <Emphasis Type="Italic">Bacillus subtilis</Emphasis> VSG-4 of tropical soil

An extracellular detergent tolerant protease producing strain VSG-4 was isolated from tropical soil sample and identified as Bacillus subtilis based on morphological, biochemical characteristics as well as 16S-rRNA gene sequencing. The VSG-4 protease was purified to homogeneity using ammonium sulphate precipitation, dialysis and sephadex G-200 gel permeation chromatography with a 17.4 purification fold. The purified enzyme was active and stable over a broad range of pH (8.0–11.0, optimum at 9.0) and temperature (40°C to 60°C, optimum at 50°C). The thermostability of the enzyme was significantly increased by the addition CaCl₂. This enzyme was strongly inhibited by PMSF and DFP, suggesting that it belongs to the serine protease superfamily. The purified VSG-4 alkaline protease showed remarkable stability in anionic (5 mM SDS) and ionic (1% Trion X-100 and 1% Tween 80) detergents. It retained 97±2% and 83.6±1.1% of its initial activity after 1 h preincubation in the presence of 1 % H₂O₂ and 1 % sodium perborate, respectively. Furthermore, the purified enzyme showed excellent stability and compatibility with some commercial laundry detergents besides its stain removal capacity. Considering these promising properties, VSG-4 protease may find tremendous application in laundry detergent formulations.     

Biosurfactants: a sustainable replacement for chemical surfactants?

Glycolipid biosurfactants produced by bacteria and yeasts provide significant opportunities to replace chemical surfactants with sustainable biologically produced alternatives in bulk commercial products such as laundry detergents and surface cleaners. Sophorolipids are already available in sufficient yield to make their use feasible while rhamnolipids and mannosylerythritol lipids require further development. The ability to tailor the biosurfactant produced to the specific needs of the product formulation will be an important future step.