Separation of polystyrene microbeads using dielectrophoretic/gravitational field-flow-fractionation.

The characterization of a dielectrophoretic/gravitational field-flow-fractionation (DEP/G-FFF) system using model polystyrene (PS) microbeads is presented. Separations of PS beads of different surface functionalization (COOH and none) and different sizes (6, 10, and 15 microm in diameter) are demonstrated. To investigate the factors influencing separation performance, particle elution times were determined as a function of particle suspension conductivity, fluid flow rate, and applied field frequency and voltage. Experimental data were analyzed using a previously reported theoretical model and good agreement between theory and experiment was found. It was shown that separation of PS beads was based on the differences in their effective dielectric properties. Particles possessing different dielectric properties were positioned at different heights in a fluid-flow profile in a thin chamber by the balance of DEP and gravitational forces, transported at different velocities under the influence of the fluid flow, and thereby separated. To explore hydrodynamic (HD) lift effects, velocities of PS beads were determined as a function of fluid flow rate in the separation chamber when no DEP field was applied. In this case, particle equilibrium height positions were governed solely by the balance of HD lift and gravitational forces. It was concluded that under the experimental conditions reported here, the DEP force was the dominant factor in controlling particle equilibrium height and that HD lift force played little role in DEP/G-FFF operation. Finally, the influence of various experimental parameters on separation performance was discussed for the optimization of DEP/G-FFF.     

Development of a method to analyze single cell activity by using dielectrophoretic levitation

In cell fusion and genetic recombination, although the activity of single cells is extremely important, there is no method to analyze single cell activity. Development of a quick analyzing method for single cell activity is desired in various fields. Dielectrophoresis (DEP) refers to the force exerted on the induced dipole moment of an uncharged dielectric and/or conductive particle by a nonuniform electric field. By applying DEP, we obtained experimentally a relationship between the cell activity and the dielectric property, Re[K(omega)], and examined how to evaluate the single cell activity by measuring Re[K(omega)] of a single cell. A cone and plate electrode geometry was adapted in order to achieve the feedback-controlled DEP levitation. The single cell is exposed to a nonuniform field induced by the cone and plate electrode, and a more polarizable cell is moved to the direction of the cone electrode by the DEP force. The cell settles in the position where the DEP force and gravity are balanced by controlling applied voltage. This settled position, measured on the center axis of the cone electrode, depended on the dielectric constant of the cell. From these results, the relationship between the specific growth rates in cell growth phase and the dielectric properties Re[K(omega)] was obtained. Furthermore, the effect on the cell activity of various stresses, such as concentration of carbon dioxide, temperature, etc., was examined.     

Label-free Isolation and Enrichment of Cells Through Contactless Dielectrophoresis

Dielectrophoresis (DEP) is the phenomenon by which polarized particles in a non-uniform electric field undergo translational motion, and can be used to direct the motion of microparticles in a surface marker-independent manner. Traditionally, DEP devices include planar metallic electrodes patterned in the sample channel. This approach can be expensive and requires a specialized cleanroom environment. Recently, a contact-free approach called contactless dielectrophoresis (cDEP) has been developed. This method utilizes the classic principle of DEP while avoiding direct contact between electrodes and sample by patterning fluidic electrodes and a sample channel from a single polydimethylsiloxane (PDMS) substrate, and has application as a rapid microfluidic strategy designed to sort and enrich microparticles. Unique to this method is that the electric field is generated via fluidic electrode channels containing a highly conductive fluid, which are separated from the sample channel by a thin insulating barrier. Because metal electrodes do not directly contact the sample, electrolysis, electrode delamination, and sample contamination are avoided. Additionally, this enables an inexpensive and simple fabrication process.cDEP is thus well-suited for manipulating sensitive biological particles. The dielectrophoretic force acting upon the particles depends not only upon spatial gradients of the electric field generated by customizable design of the device geometry, but the intrinsic biophysical properties of the cell. As such, cDEP is a label-free technique that avoids depending upon surface-expressed molecular biomarkers that may be variably expressed within a population, while still allowing characterization, enrichment, and sorting of bioparticles.Here, we demonstrate the basics of fabrication and experimentation using cDEP. We explain the simple preparation of a cDEP chip using soft lithography techniques. We discuss the experimental procedure for characterizing crossover frequency of a particle or cell, the frequency at which the dielectrophoretic force is zero. Finally, we demonstrate the use of this technique for sorting a mixture of ovarian cancer cells and fluorescing microspheres (beads).     

MyDEP: A New Computational Tool for Dielectric Modeling of Particles and Cells

Dielectrophoresis (DEP) and electrorotation (ROT) are two electrokinetic phenomena exploiting nonuniform electric fields to exert a force or torque on biological particles suspended in liquid media. They are widely used in lab-on-chip devices for the manipulation, trapping, separation, and characterization of cells, microorganisms, and other particles. The DEP force and ROT torque depend on the respective polarizabilities of the particle and medium, which in turn depend on their dielectric properties and on the field frequency. In this work, we present a new software, MyDEP, which implements several particle models based on concentric shells with adjustable dielectric properties. This tool enables the study of the variation in DEP and ROT spectra according to different parameters, such as the field frequency and medium conductivity. Such predictions of particle behavior are very useful for choosing appropriate parameters in DEP experiments. The software also enables the study of the homogenized properties of spherical or ellipsoidal multishell particles and provides a database containing published cell properties. Equivalent electrical conductivity and relative permittivity of the cell alone and in suspension can be calculated. The software also offers the ability to create graphs of the evolution of the crossover frequencies with the electric field frequency. These graphs can be directly exported from the software.     

Dielectrophoresis based-cell patterning for tissue engineering

Engineering functional tissues and organs in vitro is considered integral to regenerative medicine. Many recent cell patterning technique developments position cells at a pre-designated pattern to improve tissue engineering efficiency and quality and to facilitate 3-D cell-cell interaction exploration. Among these techniques, dielectrophoresis (DEP)-based cell patterning advantageously offers speed, ease of operation, low degree of cell damage, and precision. This article reviews recent advances in DEP-based patterning techniques, including electrode design, suitable buffer and hydrogel, effects of the electric current to cells, combination potential with other techniques, as well as efforts to generate 3-D tissues.     

Enhanced cell viability and cell adhesion using low conductivity medium for negative dielectrophoretic cell patterning

Negative dielectrophoretic (n-DEP) cell manipulation is an efficient way to pattern human liver cells on micro-electrode arrays. Maintaining cell viability is an important objective for this approach. This study investigates the effect of low conductivity medium and the optimally designed microchip on cell viability and cell adhesion. To explore the influence of conductivity on cell viability and cell adhesion, we have used earlier reported dielectrophoresis (DEP) buffer with a conductivity of 10.2 mS/m and three formulated media with conductivity of 9.02 (M1), 8.14 (M2), 9.55 (M3) mS/m. The earlier reported isotonic sucrose/dextrose buffer (DEP buffer) used for DEP manipulation has the drawback of poor cell adhesion and cell viability. A microchip prototype with well-defined positioning of titanium electrode arrays was designed and fabricated on a glass substrate. The gap between the radial electrodes was accurately determined to achieve good cell patterning performance. Parameters such as dimension of positioning electrode, amplitude, and frequency of voltage signal were investigated to optimize the performance of the microchip.     

Sensing Biophysical Alterations of Human Lung Epithelial Cells (A549) in the Context of Toxicity Effects of Diesel Exhaust Particles

Diesel exhaust particles (DEP) in urban air are associated with numerous respiratory diseases. The role of underlying biomechanics in cytotoxicity of individual lung cells relating to DEP exposure is unclear. In this study, atomic force microscopy (AFM), confocal Raman microspectroscopy (RM), and fluorescence (FL) microscopy were used to monitor alterations of single A549 cells exposed to DEP. Results revealed a significant decrease in membrane surface adhesion force and a significant change in cell elasticity as a function of DEP–cell interaction time, and the dynamic changes in cellular biocomponents which were reflected by changes of characteristic Raman bands: 726 cm^?1 (adenine), 782 cm^?1 (uracil, cytosine, thymine), 788 cm^?1 (O–P–O), 1006 cm^?1 (phenylalanine), and 1320 cm^?1 (guanine) after DEP exposure. These findings suggest that the combination of multi-instruments (e.g., AFM/FL) may offer an exciting platform for investigating the roles of biophysical and biochemical responses to particulate matter-induced cell toxicity.     

Self-Rotation of Cells in an Irrotational AC E-Field in an Opto-Electrokinetics Chip

The use of optical dielectrophoresis (ODEP) to manipulate microparticles and biological cells has become increasingly popular due to its tremendous flexibility in providing reconfigurable electrode patterns and flow channels. ODEP enables the parallel and free manipulation of small particles on a photoconductive surface on which light is projected, thus eliminating the need for complex electrode design and fabrication processes. In this paper, we demonstrate that mouse cells comprising melan-a cells, RAW 267.4 macrophage cells, peripheral white blood cells and lymphocytes, can be manipulated in an opto-electrokinetics (OEK) device with appropriate DEP parameters. Our OEK device generates a non-rotating electric field and exerts a localized DEP force on optical electrodes. Hitherto, we are the first group to report that among all the cells investigated, melan-a cells, lymphocytes and white blood cells were found to undergo self-rotation in the device in the presence of a DEP force. The rotational speed of the cells depended on the voltage and frequency applied and the cells'' distance from the optical center. We discuss a possible mechanism for explaining this new observation of induced self-rotation based on the physical properties of cells. We believe that this rotation phenomenon can be used to identify cell type and to elucidate the dielectric and physical properties of cells.     

Nanobody-CD16 Catch Bond Reveals NK Cell Mechanosensitivity

Antibodies are key tools in biomedical research and medicine. Their binding properties are classically measured in solution and characterized by an affinity. However, in physiological conditions, antibodies can bridge an immune effector cell and an antigen-presenting cell, implying that mechanical forces may apply to the bonds. For example, in antibody-dependent cell cytotoxicity—a major mode of action of therapeutic monoclonal antibodies—the Fab domains bind the antigens on the target cell, whereas the Fc domain binds to the activating receptor CD16 (also known as FcgRIII) of an immune effector cell, in a quasi-bidimensional environment (2D). Therefore, there is a strong need to investigate antigen/antibody binding under force (2D) to better understand and predict antibody activity in vivo. We used two anti-CD16 nanobodies targeting two different epitopes and laminar flow chamber assay to measure the association and dissociation of single bonds formed between microsphere-bound CD16 antigens and surface-bound anti-CD16 nanobodies (or single-domain antibodies), simulating 2D encounters. The two nanobodies exhibit similar 2D association kinetics, characterized by a strong dependence on the molecular encounter duration. However, their 2D dissociation kinetics strongly differ as a function of applied force: one exhibits a slip bond behavior in which off rate increases with force, and the other exhibits a catch-bond behavior in which off rate decreases with force. This is the first time, to our knowledge, that catch-bond behavior was reported for antigen-antibody bond. Quantification of natural killer cells spreading on surfaces coated with the nanobodies provides a comparison between 2D and three-dimensional adhesion in a cellular context, supporting the hypothesis of natural killer cell mechanosensitivity. Our results may also have strong implications for the design of efficient bispecific antibodies for therapeutic applications.     

Influence of cell adhesion and spreading on impedance characteristics of cell-based sensors

Impedance measurements of cell-based sensors are a primary characterization route for detection and analysis of cellular responses to chemical and biological agents in real time. The detection sensitivity and limitation depend on sensor impedance characteristics and thus on cell patterning techniques. This study introduces a cell patterning approach to bind cells on microarrays of gold electrodes and demonstrates that single-cell patterning can substantially improve impedance characteristics of cell-based sensors. Mouse fibroblast cells (NIH3T3) are immobilized on electrodes through a lysine-arginine-glycine-aspartic acid (KRGD) peptide-mediated natural cell adhesion process. Electrodes are made of three sizes and immobilized with either covalently bound or physically adsorbed KRGD (c-electrodes or p-electrodes). Cells attached to c-electrodes increase the measurable electrical signal strength by 48.4%, 24.2%, and 19.0% for three electrode sizes, respectively, as compared to cells attached to p-electrodes, demonstrating that both the electrode size and surface chemistry play a key role in cell adhesion and spreading and thus the impedance characteristics of cell-based sensors. Single cells patterned on c-electrodes with dimensions comparable to cell size exhibit well-spread cell morphology and substantially outperform cells patterned on electrodes of other configurations.     

Separation of viable and nonviable animal cell using dielectrophoretic filter

Selective separation of cells using dielectrophoresis (DEP) has recently been studied and methods have been proposed. However, these methods are not applicable to large‐scale separation because they cannot be performed efficiently. In DEP separation, the DEP force is effective only when it is applied close to the electrodes. Utilizing a DEP filter is a solution for large‐scale separation. In this article, the separation efficiency for viable and nonviable cells in a DEP filter was examined. The effects of an applied AC electric field frequency and the gradient of the squared electric field intensity on a DEP velocity for the viable and nonviable animal cells (3‐2H3 cell) were discussed. The frequency response of the DEP velocity differed between the viable and the nonviable cells. We deducted an empirical equation that can be used as guiding principle for the DEP separation. The results indicate that the viable and the nonviable cells were separated using the DEP filter, and the best operating conditions such as the applied voltage and the flow rate were discussed. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Experimental collision efficiencies of polymer-flocculated animal cells.

The determination of particle collision kinetics is useful to decouple the effects of process parameters on individual events in flocculation. This paper discusses the effects of flocculation conditions on the collision efficiency of ATCC strain CRL 1606 hybridomas flocculated with poly-L-histidine. Experimental determinations of the collision efficiency of cells in Couette flow are presented over a range of experimental conditions. The collision efficiency correlates with the cell zeta potential to the -2.4 power at high surface coverage, consistent with literature results in latex systems. At low coverage, accounting for the distribution of polymer on the cells corrects for deviation from the high-coverage behavior. Collision is dependent on the hydrodynamic environment as well. At high surface coverage, collision efficiency is weakly dependent on hydrodynamic conditions and follows a dependency on the shear rate and viscosity to the -0.32 power. This is consistent with ionic coagulation theory. At low surface coverage, the collision efficiency is strongly dependent on the viscous fluid forces. The results versus both dose and shear rate over the entire range of surface coverages are consistent with weak intercell bonding. Collision kinetics in the presence of high molecular weight dextrans show steric hindrance to cell collision.     

Isolation and quantitative estimation of diesel exhaust and carbon black particles ingested by lung epithelial cells and alveolar macrophages in vitro

A new procedure for isolating and estimating ingested carbonaceous diesel exhaust particles (DEP) or carbon black (CB) particles by lung epithelial cells and macrophages is described. Cells were incubated with DEP or CB to examine cell-particle interaction and ingestion. After various incubation periods, the cells were separated from free extracellular DEP or CB particles by Ficoll density gradient centrifugation and dissolved in hot sodium dodecyl sulfate detergent. Insoluble DEP or CB residues were isolated by high-speed centrifugation, and the elemental carbon (EC) concentrations in the pellets were estimated by a thermal-optical-transmittance method (i.e., carbon analysis). From the EC concentration, the amount of ingested DEP or CB could be calculated. The described technique allowed the determination of the kinetics and dose dependence of DEP uptake by LA4 lung epithelial cells and MHS alveolar macrophages. Both cell types ingested DEP to a similar degree; however, the MHS macrophages took up significantly more CB than the epithelial cells. Cytochalasin D, an agent that blocks actin polymerization in the cells, inhibited approximately 80% of DEP uptake by both cell types, indicating that the process was actin-dependent in a manner similar to phagocytosis. This technique can be applied to examine the interactions between cells and particles containing EC and to study the modulation of particle uptake in diseased tissue.     

Multiphase electrodes for microbead control applications: integration of DEP and electrokinetics for bio-particle positioning

Advances in microfabrication have introduced new possibilities for automated, high-throughput biomedical investigations and analysis. Physical effects such as dielectrophoresis (DEP) and AC electrokinetics can be used to manipulate particles in solution to coordinate a sequence of bioanalytical processing steps. DEP is accomplished with non-uniform electric fields that can polarize particles (microbeads, cells, viruses, DNA, proteins, etc.) in suspension causing translational or rotational movement. AC electrokinetics is another phenomena involved with movement of particles in suspension with electric fields and is comprised of both electro-thermal and electro-osmotic effects. This paper investigates single layer electrodes that are effective for particle localization and clustering based on DEP and AC electrokinetic effects. We demonstrate a novel multi-electrode setup capable of clustering particles into an array of discrete bands using activated and electrically floating electrodes. These bands shift to adjacent regions on the electrode surface by altering the electrode activation scheme. The predictability of particle placement to specific locations provides new opportunities for integration and coordination with raster scanning lasers or a charge coupled device (CCD) for advanced biomedical diagnostic devices, and more sophisticated optical interrogation techniques.     

Analysis of chromosome aberrations in human peripheral lymphocytes induced by in vitro α-particle irradiation

Irradiation of human lymphocytes by α-particles under different conditions has been seen to be substantially more effective in the induction of dicentric chromosomes than irradiation by ψ-rays. However, the relative biological effectiveness (RBE) determined in these studies RBE are likely to be due in part to differing exposure conditions. Therefore, a technique designed to insure iniformity of irradiation was developed in the present study, and complications due to the cell cycle kinetics were controlled. After stimulation with phytohaemagglutinin (PHA), separated lymphocytes were allowed to attach for 3 h to the thin foil bottom of an irradiation chamber. Cell monolayers were exposed with α-particles from²⁴¹Am. Strong over-dispersion was noted for the cell-to-cell variance of the number of dicentrics. The dose response of dicentrics was linear, with a yield of 0.27 dicentrics per cell and per Gy. This corresponds to a low dose RBE of 15 relative to¹³⁷Cs γ-ray exposure under the same experimental conditions.     

Parallel-plate Flow Chamber and Continuous Flow Circuit to Evaluate Endothelial Progenitor Cells under Laminar Flow Shear Stress

The overall goal of this method is to describe a technique to subject adherent cells to laminar flow conditions and evaluate their response to well quantifiable fluid shear stresses¹.Our flow chamber design and flow circuit (Fig. 1) contains a transparent viewing region that enables testing of cell adhesion and imaging of cell morphology immediately before flow (Fig. 11A, B), at various time points during flow (Fig. 11C), and after flow (Fig. 11D). These experiments are illustrated with human umbilical cord blood-derived endothelial progenitor cells (EPCs) and porcine EPCs^2,3.This method is also applicable to other adherent cell types, e.g. smooth muscle cells (SMCs) or fibroblasts.The chamber and all parts of the circuit are easily sterilized with steam autoclaving. In contrast to other chambers, e.g. microfluidic chambers, large numbers of cells (> 1 million depending on cell size) can be recovered after the flow experiment under sterile conditions for cell culture or other experiments, e.g. DNA or RNA extraction, or immunohistochemistry (Fig. 11E), or scanning electron microscopy⁵. The shear stress can be adjusted by varying the flow rate of the perfusate, the fluid viscosity, or the channel height and width. The latter can reduce fluid volume or cell needs while ensuring that one-dimensional flow is maintained. It is not necessary to measure chamber height between experiments, since the chamber height does not depend on the use of gaskets, which greatly increases the ease of multiple experiments. Furthermore, the circuit design easily enables the collection of perfusate samples for analysis and/or quantification of metabolites secreted by cells under fluid shear stress exposure, e.g. nitric oxide (Fig. 12)⁶.     

Three-dimensional discrete element method for the prediction of protoplasmic seepage through membrane in a biological cell

This paper presents a three-dimensional and compressible biological cell model based on discrete element method using multiple interacting agent that represent cellular structures within a simulated environment. The cytoplasm and nucleoplasm fluid behavior in the cell is time dependent. When taking this approach, it is important to calibrate protoplasmic flow behaviors through simulation techniques such as compressing the cell and examining the agents representing the cell cytoplasm seeping between the ones representing the confining cell membrane. This type of modelling may motivate future work on simulating simultaneous operations and interactions of multiple cellular agents in an attempt to re-create and predict the appearance of complex phenomena such as protoplasmic seepage that is caused by the force actuations of neighboring cells. Seepage occurs when a cytoplasm agent passes between three membrane particles connected in a triangular network. Based on the force–deformation response of spheres having variable size and stiffness, semi-analytic expressions are developed for the force required to cause seepage and solved numerically to find the maximum resistance offered by the membrane against cytoplasm seepage. The equations are based on force equilibrium and the constitutive relations for particle contact and membrane stiffness. In multi-particle representations of an individual cell undergoing deformation, different modes of cytoplasm seepage through confining cell membranes can occur. This can be avoided if simple criteria are satisfied. These findings can lead to certain fundamental laws for the improvement of novel cell-to-organ simulation techniques based on discrete element method.     

Biophysical assessment of single cell cytotoxicity: diesel exhaust particle-treated human aortic endothelial cells

Exposure to diesel exhaust particles (DEPs), a major source of traffic-related air pollution, has become a serious health concern due to its adverse influences on human health including cardiovascular and respiratory disorders. To elucidate the relationship between biophysical properties (cell topography, cytoskeleton organizations, and cell mechanics) and functions of endothelial cells exposed to DEPs, atomic force microscope (AFM) was applied to analyze the toxic effects of DEPs on a model cell line from human aortic endothelial cells (HAECs). Fluorescence microscopy and flow cytometry were also applied to further explore DEP-induced cytotoxicity in HAECs. Results revealed that DEPs could negatively impair cell viability and alter membrane nanostructures and cytoskeleton components in a dosage- and a time-dependent manner; and analyses suggested that DEPs-induced hyperpolarization in HAECs appeared in a time-dependent manner, implying DEP treatment would lead to vasodilation, which could be supported by down-regulation of cell biophysical properties (e.g., cell elasticity). These findings are consistent with the conclusion that DEP exposure triggers important biochemical and biophysical changes that would negatively impact the pathological development of cardiovascular diseases. For example, DEP intervention would be one cause of vasodilation, which will expand understanding of biophysical aspects associated with DEP cytotoxicity in HAECs.     

Force spectroscopy of single DNA and RNA molecules

Experiments in which single molecules of RNA and DNA are stretched, and the resulting force as a function of extension is measured have yielded new information about the physical, chemical and biological properties of these important molecules. The behavior of both single-stranded and double-stranded nucleic acids under changing solution conditions, such as ionic strength, pH and temperature, has been studied in detail. There has also been progress in using these techniques to study both the kinetics and equilibrium thermodynamics of DNA-protein interactions. These studies generate unique insights into the functions of these proteins in the cell.     

An insulator-based (electrodeless) dielectrophoretic concentrator for microbes in water

Dielectrophoresis (DEP), the motion of a particle caused by an applied electric field gradient, can concentrate microorganisms non-destructively. In insulator-based dielectrophoresis (iDEP) insulating microstructures produce non-uniform electric fields to drive DEP in microsystems. This article describes the performance of an iDEP device in removing and concentrating bacterial cells, spores and viruses while operated with a DC applied electric field and pressure gradient. Such a device can selectively trap particles when dielectrophoresis overcomes electrokinesis or advection. The dielectrophoretic trapping behavior of labeled microorganisms in a glass-etched iDEP device was observed over a wide range of DC applied electric fields. When fields higher than a particle-specific threshold are applied, particles are reversibly trapped in the device. Experiments with Bacillus subtilis spores and the Tobacco Mosaic Virus (TMV) exhibited higher trapping thresholds than those of bacterial cells. The iDEP device was characterized in terms of concentration factor and removal efficiency. Under the experimental conditions used in this study with an initial dilution of 1 x 105 cells/ml, concentration factors of the order of 3000x and removal efficiencies approaching 100% were observed with Escherichia coli cells. These results are the first characterization of an iDEP device for the concentration and removal of microbes in water.