Dictyostelium myosin: characterization of chymotryptic fragments and localization of the heavy-chain phosphorylation site

Chymotrypsin cleaves Dictyostelium myosin in half, splitting the heavy chain (210,000 daltons) into two fragments of 105,000 daltons each. One of the two major fragments is soluble at low ionic strength and has a native molecular weight of 130,000. As judged by SDS polyacrylamide gel electrophoresis, this soluble fragment consists of the two intact myosin light chains of 18,000 and 16,000 daltons and a 105,000-dalton polypeptide derived from the myosin heavy chain. The soluble fragment retains actin-activated ATPase activity and the ability to bind to actin in an ATP-dissociable fashion. The maximal velocity of the actin- activated ATPase activity of the soluble fragment is 80% of that of uncleaved myosin, although its apparent Km for actin is 12-fold greater than that of myosin. In addition to the major soluble 105,000-dalton fragment discussed above, chymotryptic cleavage of the Dictyostelium myosin also generates fragments that are insoluble at low ionic strength. The major insoluble fragment is 105,000 daltons on an SDS polyacrylamide gel and forms thick filaments that are devoid of myosin heads. A less prevalent insoluble fragment has a molecular weight of 83,000 and is probably a subfragment of the insoluble 105,000-dalton fragment. The heavy chain of myosin is phosphorylated in vivo and the phosphorylation site has been localized to the insoluble fragments, which derive from the tail portion of the myosin molecule.     

Identification of two phosphorylated threonines in the tail region of Dictyostelium myosin II

We have previously purified and characterized a Dictyostelium myosin II heavy chain kinase which phosphorylates threonine residues (C?té, G. P., and Bukiejko, U. (1987) J. Biol. Chem. 262, 1065-1072). The phosphorylated threonines are located within a 34-kDa fragment which can be selectively cleaved from the carboxyl terminal end of the Dictyostelium myosin II tail. Tryptic and chymotryptic digests of the 34-kDa fragment phosphorylated with the kinase have now been performed and the resulting phosphopeptides isolated and sequenced. Two phosphorylated threonine residues have been identified, corresponding to residues 1833 and 2029 in the complete amino acid sequence of the Dictyostelium myosin II heavy chain. These amino acids are 87 and 283 residues, respectively, distant from the carboxyl terminus of the Dictyostelium myosin II heavy chain and are present in sections of the tail which seem to be alpha-helical coiled coils. In contrast, the three Acanthamoeba myosin II heavy chain phosphorylation sites are located within 10 residues of each other in a small globular domain at the carboxyl terminal tip of the tail (C?té, G. P., Robinson, E. A., Appella, E., and Korn, E. D. (1984) J. Biol. Chem. 259, 12781-12787). This suggests that the mechanism by which heavy chain phosphorylation inhibits the actin-activated ATPase activity and filament-forming properties of the two myosins may be quite different.     

Actin-activated Mg-ATPase activity of Dictyostelium myosin II. Effects of filament formation and heavy chain phosphorylation.

The actin-activated Mg-ATPase activities of unphosphorylated and heavy chain phosphorylated Dictyostelium myosin II and of a Dictyostelium myosin II heavy meromyosin (HMM) fragment were examined at different Mg2+ and KCl concentrations. The Mg-ATPase activity of HMM displayed a maximum rate, Vmax, of about 4.0/s and a Kapp (actin concentration required to achieve 1/2 Vmax) that increased from 8 to 300 microM as the KCl concentration increased from 0 to 120 mM. When assayed with greater than 5 mM Mg2+ and 0 mM KCl the unphosphorylated Dictyostelium myosin II yielded a Kapp of 0.25 microM and a Vmax of 2.8/s. At lower Mg2+ concentrations or with 50 mM KCl the data were not fit well by a single hyperbolic curve and Kapp increased to 25-100 microM. The increase in Kapp did not correlate with the loss of sedimentable filaments. At KCl concentrations above 100 mM Vmax increased to greater than 4/s. Heavy chain phosphorylated myosin (3.5 mol of phosphate/mol myosin) displayed a Vmax of about 5/s and a Kapp of 50 microM under all conditions tested. Thus, heavy chain phosphorylation inhibited the actin-activated Mg-ATPase activity of Dictyostelium myosin II in 5-10 mM Mg2+ and low ionic strength through an increase in Kapp.     

Regulation of the actin-activated ATPase activity of Acanthamoeba myosin II by copolymerization with phosphorylated and dephosphorylated peptides derived from the carboxyl-terminal end of the heavy chain

Myosin II from Acanthamoeba castellanii is a conventional myosin composed of two heavy chains and two pairs of light chains. The amino-terminal approximately 90 kDa of each heavy chain form a globular head that contains the ATPase site and an ATP-sensitive actin-binding site. The carboxyl-terminal approximately 80 kDa of both heavy chains interact to form a coiled coil, helical rod (through which the molecules self-associate into bipolar filaments) ending in a short nonhelical tailpiece. Phosphorylation of 3 serine residues at the tip of the tail (at positions 11, 16, and 21 from the carboxyl terminus) inactivates the actin-activated Mg2(+)-ATPase activity of myosin II filaments. Previous work had indicated that the activity of each myosin II molecule in a filament reflects the global state of phosphorylation of the filament rather than the phosphorylation state of the molecule itself. We have now purified the approximately 28-kDa carboxyl-terminal region of the heavy chain lacking the last two phosphorylation sites, and we have shown that this peptide copolymerizes with and regulates the actin-activated Mg2(+)-ATPase activities of native dephosphorylated and phosphorylated myosin II. It can be concluded from these studies that the biologically relevant enzymatic activity of myosin II is regulated by a phosphorylation-dependent conformational change in the myosin filaments.     

Functional characterization of vertebrate nonmuscle myosin IIB isoforms using Dictyostelium chimeric myosin II

The alternatively spliced isoform of nonmuscle myosin II heavy chain B (MHC-IIB) with an insert of 21 amino acids in the actin-binding surface loop (loop 2), MHC-IIB(B2), is expressed specifically in the central nervous system of vertebrates. To examine the role of the B2 insert in the motor activity of the myosin II molecule, we expressed chimeric myosin heavy chain molecules using the Dictyostelium myosin II heavy chain as the backbone. We replaced the Dictyostelium native loop 2 with either the noninserted form of loop 2 from human MHC-IIB or the B2-inserted form of loop 2 from human MHC-IIB(B2). The transformant Dictyostelium cells expressing only the B2-inserted chimeric myosin formed unusual fruiting bodies. We then assessed the function of chimeric proteins, using an in vitro motility assay and by measuring ATPase activities and binding to F-actin. We demonstrate that the insertion of the B2 sequence reduces the motor activity of Dictyostelium myosin II, with reduction of the maximal actin-activated ATPase activity and a decrease in the affinity for actin. In addition, we demonstrate that the native loop 2 sequence of Dictyostelium myosin II is required for the regulation of the actin-activated ATPase activity by phosphorylation of the regulatory light chain.     

Biochemical characterization of a Dictyostelium myosin II heavy-chain phosphatase that promotes filament assembly.

In Dictyostelium cells, myosin II is found as cytosolic nonassembled monomers and cytoskeletal bipolar filaments. It is thought that the phosphorylation state of three threonine residues in the tail of myosin II heavy chain regulates the molecular motor's assembly state and localization. Phosphorylation of the myosin heavy chain at threonine residues 1823, 1833 and 2029 is responsible for maintaining myosin in the nonassembled state, and subsequent dephosphorylation of these residues is a prerequisite for assembly into the cytoskeleton. We report here the characterization of myosin heavy-chain phosphatase activities in Dictyostelium utilizing myosin II phosphorylated by myosin heavy-chain kinase A as a substrate. One of the myosin heavy-chain phosphatase activities was identified as protein phosphatase 2A and the purified holoenzyme was composed of a 37-kDa catalytic subunit, a 65-kDa A subunit and a 55-kDa B subunit. The protein phosphatase 2A holoenzyme displays two orders of magnitude higher activity towards myosin phosphorylated on the heavy chains than it does towards myosin phosphorylated on the regulatory light chains, consistent with a role in the control of filament assembly. The purified myosin heavy-chain phosphatase activity promotes bipolar filament assembly in vitro via dephosphorylation of the myosin heavy chain. This system should provide a valuable model for studying the regulation and localization of protein phosphatase 2A in the context of cytoskeletal reorganization.     

Filament formation and actin-activated ATPase activity are abolished by proteolytic removal of a small peptide from the tip of the tail of the heavy chain of Acanthamoeba myosin II

Actin-activated Mg2+-ATPase activity of myosin II from Acanthamoeba castellanii is regulated by phosphorylation of three serine residues located at the carboxyl-terminal end of each of the two 185,000-Da heavy chains; the phosphorylated molecule has full Ca2+-ATPase activity but no actin-activated Mg2+-ATPase activity. Under controlled conditions, chymotrypsin removes a small peptide containing all three phosphorylation sites from the ends of the myosin II heavy chains producing a molecule with heavy chains of 175,000 Da and undigested light chains. The length of the myosin II tail decreased from 89 to 76 nm. Chymotrypsin-cleaved myosin II has complete Ca2+-ATPase activity but no actin-activated Mg2+-ATPase activity under standard assay conditions and binds to F-actin as well as undigested myosin II in the absence, but not in the presence, of MgATP. In the presence of MgCl2, undigested myosin II forms biopolar filaments but chymotrypsin-cleaved myosin II forms only parallel (monopolar) dimers, as assessed by analytical ultra-centrifugation and rotary shadow electron microscopy. We conclude that the short segment very near the end of the myosin II tail that contains the three phosphorylatable serines is necessary for the formation of biopolar filaments and, probably as a consequence of filament formation, for the high-affinity binding of myosin II to F-actin in the presence of ATP and the actin-activated Mg2+-ATPase activity of native myosin II. This supports our previous conclusion that actin-activated Mg2+-ATPase of native myosin II is expressed only when the enzyme is in bipolar filaments with the proper conformation as determined by the state of phosphorylation of the heavy chains.     

Isolation and characterization of myosin from amoebae of Physarum polycephalum

Myosin was isolated from amoebae of Physarum polycephalum and compared with myosin from plasmodia, another motile stage in the Physarum life cycle. Amoebal myosin contained heavy chains (Mr approximately 220,000), phosphorylatable light chains (Mr 18,000), and Ca2+-binding light chains (Mr 14,000) and possessed a two-headed long-tailed shape in electron micrographs after rotary shadow casting. In the presence of high salt concentrations, myosin ATPase activity increased in the following order: Mg-ATPase activity less than K-EDTA-ATPase activity less than Ca-ATPase activity. In the presence of low salt concentrations, Mg-ATPase activity was activated approximately 9-fold by skeletal muscle actin. This actin-activated ATPase activity was inhibited by micromolar levels of Ca2+. Amoebal myosin was indistinguishable from plasmodial myosin in ATPase activities and molecular shape. However, the heavy chain and phosphorylatable light chains of amoebal myosin could be distinguished from those of plasmodial myosin in sodium dodecyl sulfate-polyacrylamide gel electrophoresis, peptide mapping, and immunological studies, suggesting that these are different gene products. Ca2+-binding light chains of amoebal and plasmodial myosins were found to be identical using similar criteria, supporting our hypothesis that the Ca2+-binding light chain plays a key role in the inhibition of actin-activated ATPase activity in Physarum myosins by micromolar levels of Ca2+.     

Purification from Dictyostelium discoideum of a low-molecular-weight myosin that resembles myosin I from Acanthamoeba castellanii

A low-molecular-weight myosin has been purified 1500-fold from extracts of Dictyostelium discoideum, based on the increase in K+,EDTA-ATPase specific activity. The purified enzyme resembles the single-headed, low-molecular-weight myosins IA and IB from Acanthamoeba castellanii, and differs from the conventional two-headed, high-molecular-weight myosin previously isolated from Dictyostelium, in several ways. It has higher K+,EDTA-ATPase activity than Ca2+-ATPase activity; it has a native molecular mass of about 150,000 and a single heavy chain of about 117,000; the 117,000-dalton heavy chain is phosphorylated by Acanthamoeba myosin I heavy chain kinase; phosphorylation of its heavy chain enhances its actin-activated Mg2+-ATPase activity; and the 117,000-dalton heavy chain reacts with antibodies raised against the heavy chain of Acanthamoeba myosin IA. None of these properties is shared by the low-molecular-weight active fragment that can be produced by chymotryptic digestion of conventional Dictyostelium myosin. We conclude that Dictyostelium contains an enzyme of the myosin I type previously isolated only from Acanthamoeba.     

Effects of limited tryptic cleavage on the physical and enzymatic properties of myosin II from Acanthamoeba castellanii

Limited digestion of Acanthamoeba myosin II by trypsin selectively cleaved the 185,000-Da heavy chains into a 73,000-Da peptide containing the catalytic and actin-binding sites and a 112,000-Da peptide containing the regulatory phosphorylatable sites. The light chains were unaffected. The proteolytic products remained associated and formed bipolar filaments that were very similar in appearance to filaments of native myosin by negative staining electron microscopy. Filaments of trypsin-cleaved, dephosphorylated myosin, however, had a smaller sedimentation coefficient than filaments of native dephosphorylated myosin. Trypsin-cleaved dephosphorylated myosin retained complete Ca2+-ATPase activity but had no actin-activated ATPase activity under conditions that are optimal for native, dephosphorylated myosin (pH 7.0, 4 mM MgCl2, 30 degrees C or pH 6.4, 1 mM MgCl2, 30 degrees C). Trypsin-cleaved dephosphorylated myosin had higher actin-activated ATPase activity at pH 6.0 and 1 mM MgCl2 than undigested dephosphorylated myosin which is appreciably inhibited under these conditions. Trypsin-cleaved, dephosphorylated myosin inhibited the actin-activated ATPase activity of native, dephosphorylated myosin when both were present in the same co-polymers, when enzymatic activity was assayed at pH 7.0, 4 mM MgCl2, and 30 degrees C, but this inhibition was overcome by raising the MgCl2 to 6 mM. These results provide additional evidence that regulation of acanthamoeba myosin II occurs at the filament level and that, under most conditions of assay, the heavy chains must be intact and the regulatory serines unphosphorylated for actin-activated ATPase activity to be maximally expressed.     

Cytoplasmic myosin from Drosophila melanogaster

Myosin is identified and purified from three different established Drosophila melanogaster cell lines (Schneider's lines 2 and 3 and Kc). Purification entails lysis in a low salt, sucrose buffer that contains ATP, chromatography on DEAE-cellulose, precipitation with actin in the absence of ATP, gel filtration in a discontinuous KI-KCl buffer system, and hydroxylapatite chromatography. Yield of pure cytoplasmic myosin is 5-10%. This protein is identified as myosin by its cross-reactivity with two monoclonal antibodies against human platelet myosin, the molecular weight of its heavy chain, its two light chains, its behavior on gel filtration, its ATP-dependent affinity for actin, its characteristic ATPase activity, its molecular morphology as demonstrated by platinum shadowing, and its ability to form bipolar filaments. The molecular weight of the cytoplasmic myosin's light chains and peptide mapping and immunochemical analysis of its heavy chains demonstrate that this myosin, purified from Drosophila cell lines, is distinct from Drosophila muscle myosin. Two-dimensional thin layer maps of complete proteolytic digests of iodinated muscle and cytoplasmic myosin heavy chains demonstrate that, while the two myosins have some tryptic and alpha-chymotryptic peptides in common, most peptides migrate with unique mobility. One-dimensional peptide maps of SDS PAGE purified myosin heavy chain confirm these structural data. Polyclonal antiserum raised and reacted against Drosophila myosin isolated from cell lines cross-reacts only weakly with Drosophila muscle myosin isolated from the thoraces of adult Drosophila. Polyclonal antiserum raised against Drosophila muscle myosin behaves in a reciprocal fashion. Taken together our data suggest that the myosin purified from Drosophila cell lines is a bona fide cytoplasmic myosin and is very likely the product of a different myosin gene than the muscle myosin heavy chain gene that has been previously identified and characterized.     

Cooperative dependence of the actin-activated Mg2+-ATPase activity of Acanthamoeba myosin II on the extent of filament phosphorylation

The actin-activated Mg2+-ATPase of myosin II from Acanthamoeba castellanii is regulated by phosphorylation of 3 serine residues at the tip of the tail of each of its two heavy chains; only dephosphorylated myosin II is active, whereas the phosphorylated and dephosphorylated forms have identical Ca2+-ATPase activities and Mg2+-ATPase activities in the absence of F-actin. We have now chemically modified phosphorylated and dephosphorylated myosin II with N-ethylmaleimide (NEM). The modification occurred principally at a single site within the NH2-terminal 73,000 Da of the globular head of the heavy chain. NEM-myosin II bound to F-actin and formed filaments normally, but the Ca2+- and Mg2+-ATPase activities of phosphorylated and dephosphorylated myosin II and the actin-activated Mg2+-ATPase activity of NEM-dephosphorylated myosin II were inhibited. Only filamentous myosin II has actin-activated Mg2+-ATPase activity. Native phosphorylated myosin II acquired actin-activated Mg2+-ATPase activity when it was co-polymerized with NEM-inactivated dephosphorylated myosin II, and the increase in its activity was cooperatively dependent on the fraction of NEM-dephosphorylated myosin II in the filaments. From this result, we conclude that the specific activity of each molecule within a filament is independent of its own state of phosphorylation, but is highly cooperatively dependent upon the state of phosphorylation of the filament as a whole. This enables the actin-activated Mg2+-ATPase activity of myosin II filaments to respond rapidly and extensively to small changes in the level of their phosphorylation.     

Studies on the subunits of myosin from muscle layer of Ascaris lumbricoides suum.

1. A purified preparation of Ascaris myosin was obtained from the muscle layer of Ascaris lumbricoides suum, using gel filtration and ion-exchange chromatography. 2. Ascaris myosin whether purified or unpurified, had almost the same ability for ATP-splitting and superprecipitation. 3. Ascaris myosin and rabbit skeletal myosin were subjected to sodium dodecyl sulfate-polyacrylamide gel electrophoresis. A significant difference in the number of light chains between both myosins was found. Ascaris myosin was found to have one heavy chain and two distinct light chain components (LC1-A and LC2-A), having molecular weights of 18000 and 16000, respectively. These light chains correspond in molecular weight to the light chain 2 (LC2-S) and light chain 3 (LC3-S) in rabbit skeletal myosin. 4. LC1-A could be liberated from the Ascaris myosin molecule reacted with 5,5'-dithio-bis(2-nirobenzoic acid( Nbs2) with recovery of ATPase activity by addition of dithiothreitol. These properties are equivalent to those of the LC2-S in rabbit skeletal myosin, although Ascaris myosin when treated with Nbs2-urea lost its ATPase activity.     

Release of myosin II from the membrane-cytoskeleton of Dictyostelium discoideum mediated by heavy-chain phosphorylation at the foci within the cortical actin network

Membrane-cytoskeletons were prepared from Dictyostelium amebas, and networks of actin and myosin II filaments were visualized on the exposed cytoplasmic surfaces of the cell membranes by fluorescence staining (Yumura, S., and T. Kitanishi-Yumura. 1990. Cell Struct. Funct. 15:355-364). Addition of ATP caused contraction of the cytoskeleton with aggregation of part of actin into several foci within the network, but most of myosin II was released via the foci. However, in the presence of 10 mM MgCl2, which stabilized myosin II filaments, myosin II remained at the foci. Ultrastructural examination revealed that, after contraction, only traces of monomeric myosin II remained at the foci. By contrast, myosin II filaments remained in the foci in the presence of 10 mM MgCl2. These observations suggest that myosin II was released not in a filamentous form but in a monomeric form. Using [gamma 32P]ATP, we found that the heavy chains of myosin II released from membrane-cytoskeletons were phosphorylated, and this phosphorylation resulted in disassembly of myosin filaments. Using ITP (a substrate for myosin II ATPase) and/or ATP gamma S (a substrate for myosin II heavy-chain kinase [MHCK]), we demonstrated that phosphorylation of myosin heavy chains occurred at the foci within the actin network, a result that suggests that MHCK was localized at the foci. These results together indicate that, during contraction, the heavy chains of myosin II that have moved toward the foci within the actin network are phosphorylated by a specific MHCK, with the resultant disassembly of filaments which are finally released from membrane-cytoskeletons. This series of reactions could represent the mechanism for the relocation of myosin II from the cortical region to the endoplasm.     

Regulation of scallop myosin by mutant regulatory light chains

Scallop adductor myosin is regulated by its subunits; the regulatory light chain (R-LC) and essential light chain (E-LC). Myosin light chains suppress muscle activity in the absence of calcium and are responsible for relaxation. The binding of Ca2+ to the myosin triggers contraction by releasing the inhibition imposed on myosin by the light chains. To map the functional domains of the R-LC, we have carried out mutagenesis followed by bacterial expression. Both wild-type and mutant proteins were hybridized to scallop myosin heavy chain/E-LC to map the regions of the light chain that are responsible for the binding to the myosin heavy chain/E-LC, for restoring the specific calcium-binding site, and controlling the myosin ATPase activity. The R-LC is expressed in Escherichia coli using the pKK223-3 (Pharmacia) expression vector and has been purified to greater than 90% purity. E. coli-expressed wild-type R-LC differs from the native R-LC by having the initiating methionine residue and an unblocked NH2 terminus. The wild-type R-LC restores Ca2+ binding and Ca2+ sensitivity when hybridized to scallop myosin. A point mutation of the sixth Ca2(+)-liganding position of domain I (Asp39----Ala39) results in a R-LC that binds more weakly to the heavy chain/E-LC and restores the specific Ca2(+)-binding site but not regulation of the actin-activated Mg2+ ATPase. A second mutation was produced by substituting the last 11 residues of the COOH terminus with 15 different residues. This mutant restores the specific Ca2(+)-binding site, but does not restore Ca2+ regulation to the actin-activated ATPase activity. Several other point mutations do not alter light chain function. The experiments directly establish that the divalent cation-binding site of domain I is functionally distinct from the specific Ca2(+)-binding site. The results indicate that an intact domain I and the COOH terminus are required to suppress the myosin ATPase activity. The fact that the domain I mutation and the COOH-terminal mutation disrupt regulation but do not affect Ca2(+)-binding indicates that these two aspects of regulation are separable and, therefore, the R-LC has distinct functional regions.     

Myosin heavy chain kinase from developed Dictyostelium cells. Purification and characterization

We purified to homogeneity the Dictyostelium discoideum myosin heavy chain kinase that is implicated in the heavy chain phosphorylation increases that occur during chemotaxis. The kinase is initially found in the insoluble fraction of developed cells. The major purification step was achieved by affinity chromatography using a tail fragment of Dictyostelium myosin (LMM58) expressed in Escherichia coli (De Lozanne, A., Berlot, C. H., Leinwand, L. A., and Spudich, J. A. (1988) J. Cell Biol. 105, 2990-3005). The kinase has an apparent molecular weight of 84,000 as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The apparent native molecular weight by gel filtration is 240,000. The kinase catalyzes phosphorylation of myosin heavy chain or LMM58 with similar kinetics, and the extent of phosphorylation for both is 4 mol of phosphate/mol. With both substrates the Vmax is about 18 mumol/min/mg and the Km is 15 microM. The myosin heavy chain kinase is specific to Dictyostelium myosin heavy chain, and the phosphorylated amino acid is threonine. The kinase undergoes autophosphorylation. Each mole of kinase subunit incorporates about 20 mol of phosphates. Phosphorylation of myosin by this kinase inhibits myosin thick filament formation, suggesting that the kinase plays a role in the regulation of myosin assembly.     

Purification and characterization of a smooth muscle myosin phosphatase from turkey gizzards

A phosphoprotein phosphatase that dephosphorylates smooth muscle myosin has been purified to apparent homogeneity from turkey gizzards. Smooth muscle phosphatase (SMP) IV has a molecular weight of 150,000 as determined by gel filtration on a Sephadex G-200 column and is composed of two subunits (Mr = 58,000 and 40,000). Although it is active toward a number of proteins, its activities toward the contractile proteins, intact myosin, heavy meromyosin, and isolated myosin light chains are higher than its activities toward phosphorylase alpha, histone IIA, and phosphorylase kinase. SMP-IV preferentially dephosphorylates the beta-subunit of phosphorylase kinase. The properties of the enzyme have been studied using heavy meromyosin, a soluble chymotryptic fragment of myosin, and isolated myosin light chains as substrates. SMP-IV has high affinity for both substrates and is optimally active at neutral pH. Divalent cations, Ca2+ and Mg2+, activate the dephosphorylation of heavy meromyosin but inhibit the activity toward myosin light chains. Low concentrations of ATP (1-5 mM) activate SMP-IV but concentrations higher than 5 mM are inhibitory. Inhibition of 50% of the activity of the enzyme by NaF and PPi requires concentrations higher than 10 mM. Rabbit skeletal muscle heat stable inhibitor-2 has no effect on the activity of SMP-IV toward heavy meromyosin, myosin light chains, and phosphorylase alpha.     

Biochemical and structural studies of actomyosin-like proteins from non-muscle cells. Isolation and characterization of myosin from amoebae of Dictyostelium discoideum

A myosin-like protein was purified from amoebae of the cellular slime mold Dictyostelium discoideum. The purification utilized newly discovered solubility properties of actomyosin in sucrose. The amoebae were extracted with a 30% sucrose solution containing 0.1 m-KCl, and actomyosin was selectively precipitated from this crude extract by removal of the sucrose. The myosin and actin were then solubilized in a buffer containing KI and separated by gel filtration.The purified Dictyostelium myosin bears a very close resemblance to muscle myosin. The amoeba protein contains two heavy chains, about 210,000 molecular weight each, and two classes of light chains, 16,000 and 18,000 molecular weight. Dictyostelium myosin is insoluble at low ionic strength and forms bipolar thick filaments. The myosin possesses ATPase activity that is activated by Ca²⁺ but not EDTA, and is inhibited by Mg²⁺; under optimal conditions the specific activity of the enzyme is 0.09 μmol P₁/min per mg myosin.Dictyostelium myosin interacts with Dictyostelium actin or muscle actin, as shown by electron microscopy and by measurements of enzymatic activity. The ATPase activity of Dictyostelium myosin, in the presence of Mg²⁺ at low ionic strength, exhibits an average ninefold activation when actin is added.     

Subunit location of sulfhydryl groups of myosin labeled with a purine disulfide analog of adenosine triphosphate.

A purine disulfide analog of ATP, 6,6'-dithiobis(inosinyl imidodiphosphate), forms mixed disulfides with cysteine residues at what are believed to be ATP regulatory sites of myosin. Blocking these sites causes inactivation of the ATPase activity at the active sites. Two cysteine residues per head are specifically modifed by this disulfide analog. The thiopurine nucleotides can be stoichiometrically displaced from myosin by [14-C]cyanide to give a more stable thiocyanato derivative of the enzyme. [14-C]Thiocyanatomyosin (3.7 14-CN/myosin) was dissociated in 4 M urea and the individual subunits were isolated. The heavy chains each had 0.78 14-CN bound per 200,000 molecular weight unit. The light chain with molecular weight of 20,700 had 1.00 14-CN bound and the 16,500 molecular weight light chain had 0.65 14-CN bound. The two 19,000 molecular weight light chains were not labeled. The two labeled light chains have only a single cysteine which is stoichiometrically modified. These two light chains show a high degree of homology and presumably perform identical functions in myosin. Their specific modification by the purine disulfide analog and their other known properties suggest that they contribute directly to the ATP regulatory sites and may, in fact, function as regulatory subunits.     

Purification and characterization of a myosin heavy chain kinase from Dictyostelium discoideum

A Dictyostelium discoideum myosin heavy chain kinase has been purified 14,000-fold to near homogeneity. The enzyme has a Mr = 130,000 as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and greater than 700,000 as determined by gel filtration on Bio-Gel A-1.5m. The enzyme has a specific activity of 1 mumol/min X mg when assayed at a Dictyostelium myosin concentration of 0.3 mg/ml. A maximum of 2 mol of phosphate/mol of myosin is incorporated by the kinase, and the phosphorylated amino acid is threonine. Phosphate is incorporated only into the myosin heavy chains, not into the light chains. The actin-activated Mg2+-ATPase of Dictyostelium myosin is inhibited 70-80% following maximal phosphorylation with the kinase. The myosin heavy chain kinase requires 1-2 mM Mg2+ for activity and is most active at pH 7.0-7.5. The activity of the enzyme is not significantly altered by the presence of Ca2+, Ca2+ and calmodulin, EGTA, cAMP, or cGMP. When incubated with Mg2+ and ATP, phosphate is incorporated into the myosin heavy chain kinase, perhaps by autophosphorylation.