On-line estimation of O<Subscript>2</Subscript> production,CO<Subscript>2</Subscript> uptake,and growth kinetics of microalgal cultures in a gas-tight photobioreactor

Growth of the green algae Chlamydomonas reinhardtii and Chlorella sp. in batch cultures was investigated in a novel gas-tight photobioreactor, in which CO₂, H₂, and N₂ were titrated into the gas phase to control medium pH, dissolved oxygen partial pressure, and headspace pressure, respectively. The exit gas from the reactor was circulated through a loop of tubing and re-introduced into the culture. CO₂ uptake was estimated from the addition of CO₂ as acidic titrant and O₂ evolution was estimated from titration by H₂, which was used to reduce O₂ over a Pd catalyst. The photosynthetic quotient, PQ, was estimated as the ratio between O₂ evolution and CO₂ up-take rates. NH₄ ⁺, NO₂ ⁻, or NO₃ ⁻ was the final cell density limiting nutrient. Cultures of both algae were, in general, characterised by a nitrogen sufficient growth phase followed by a nitrogen depleted phase in which starch was the major product. The estimated PQ values were dependent on the level of oxidation of the nitrogen source. The PQ was 1 with NH₄ ⁺ as the nitrogen source and 1.3 when NO₃ ⁻ was the nitrogen source. In cultures grown on all nitrogen sources, the PQ value approached 1 when the nitrogen source was depleted and starch synthesis became dominant, to further increase towards 1.3 over a period of 3–4 days. This latter increase in PQ, which was indicative of production of reduced compounds like lipids, correlated with a simultaneous increase in the degree of reduction of the biomass. When using the titrations of CO₂ and H₂ into the reactor headspace to estimate the up-take of CO₂, the production of O₂, and the PQ, the rate of biomass production could be followed, the stoichiometrical composition of the produced algal biomass could be estimated, and different growth phases could be identified.     

Optimization of extracellular alkaline protease production from species of <Emphasis Type="Italic">Bacillus</Emphasis>

Thirty-five strains capable of secreting extracellular alkaline proteases were isolated from the soil and waste water near the milk processing plant, slaughterhouse. Strain APP1 with the highest-yield alkaline proteases was identified as Bacillus sp. The cultural conditions were optimized for maximum enzyme production. When the initial pH of the medium was 9.0, the culture maintained maximum proteolytic activity for 2,560 U ml⁻¹ at 50°C for 48 h under the optimized conditions containing (g⁻¹): soyabean meal, 15; wheat flour, 30; K₂HPO₄, 4; Na₂HPO₄, 1; MgSO₄·7H₂O, 0.1; Na₂CO₃, 6. The alkaline protease showed extreme stability toward SDS and oxidizing agents, which retained its activity above 73 and 110% on treatment for 72 h with 5% SDS and 5% H₂O₂, respectively.     

The effect of bacterial strain and temperature changes on the nitrogenase activity of Lotus pedunculatus root nodules

After 40 days of growth at 25°C, Lotus pedunculatus cav., cv. Maku plants infected with Rhizobium loti strain NZP2037 displayed similar relative growth rates but had twice the nodule mass and only one third the whole plant dry weight of plants infected with Bradyrhizobium sp. (Lotus) strain CC814s. In the NZP2037 symbiosis, the rate of CO₂ evolution (per g dry weight of nodulated root) was 1.6 times as high as that in the CC814s symbiosis while the rate of C₂H₂ reduction (per g dry weight of nodule) was only 48% of that in the CC814s symbiosis. Studies of the effect of short term temperature changes on the gas exchange characteristics (CO₂ and H₂ evolution, C₂H₂ reduction) of these symbioses revealed wide differences in the optima for C₂H₂ reduction. Nodules infected with NZP2037 displayed maximal C₂H₂ reduction rates [157 μmol (g dry weight nodule)^?1 h^?1] at 12°C, whereas nodules infected with CC814s were optimal at 30°C [208 μmol (g dry weight nodule)^?1 h^?1]. These short term studies suggested that differences in temperature optima for N₂ may have partially accounted for the poorer effectivity, at 25°C, of strain NZP2037 when compared with strain CC-814s. The relative efficiency [RE = 1 – (H₂ evolution/C₂H₂ reduction)] of N₂ fixation varied widely with temperature in the two symbioses, but there was a general trend toward higher RE with lower temperatures. The ratio of CO₂ evolution: C₂H₂ reduction (mol/mol) in nodulated roots infected with CC814s was constant (ca 10 CO₂/C₂H₂) between 5°C and 30°C, whereas in plants infected with NZP2037 it reached a minimal value of 3.3 CO₂/C₂H₂ at 10°C and was 19 CO₂/C₂H₂ at the growing temperature (25°C).     

A chelate complex‐enhanced luminol system for selective determination of Co(II), Fe(II) and Cr(III)

A determination method for Co(II), Fe(II) and Cr(III) ions by luminol‐H₂O₂ system using chelating reagents is presented. A metal ion‐chelating ligand complex with a Co(II) ion and a chelating reagent like ethylenediaminetetraacetic acid (EDTA) produced highly enhanced chemiluminescence (CL) intensity as well as longer lifetime in the luminol‐H₂O₂ system compared to metals that exist as free ions. Whereas free Cu(II) and Pb(II) ions had a strong catalytic effect on the luminol‐H₂O₂ system, significantly, the complexes of Cu(II) and Pb(II) with chelating reagents lost their catalytic activity due to the chelating reagents acting as masking agents. Based on the observed phenomenon, it was possible to determine Co(II), Fe(II) and Cr(III) ions with enhanced sensitivity and selectivity using the chelating reagents of the luminol‐H₂O₂ system. The effects of ligand, H₂O₂ concentration, pH, buffer solution and concentrations of chelating reagents on CL intensity of the luminol‐H₂O₂ system were investigated and optimized for the determination of Co(II), Fe(II) and Cr(III) ions. Under optimized conditions, the calibration curve of metal ions was linear over the range of 2.0 × 10^‐8 to 2.0 × 10^‐5 M for Co(II), 1.0 × 10^‐7 to 2.0 × 10^‐5 M for Fe (II) and 2.0 × 10^‐7 to 1.0 × 10^‐4 M for Cr(III). Limits of detection (3σ/s) were 1.2 × 10^‐8, 4.0 × 10^‐8 and 1.2 × 10^‐7 M for Co(II), Fe(II) and Cr(III), respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Study on the reaction mechanism and the static injection chemiluminescence method for detection of acetaminophen

Acetaminophen, also called paracetamol, is found in Tylenol, Excedrin and other products as over–the‐counter medicines. In this study, acetaminophen as a luminol signal enhancer was used in the chemiluminescence (CL) substrate solution of horseradish peroxidase (HRP) for the first time. The use of acetaminophen in the luminol–HRP–H₂O₂ system affected not only the intensity of the obtained signal, but also its kinetics. It was shown that acetaminophen was to be a potent enhancer of the luminol–HRP–H₂O₂ system. A putative enhancement mechanism for the luminol–H₂O₂–HRP–acetaminophen system is presented. The resonance of the nucleophilic amide group and the benzene ring of acetaminophen structure have a great effect on O‐H bond dissociation energy of the phenol group and therefore on phenoxyl radical stabilization. These radicals act as mediators between HRP and luminol in an electron transfer reaction that generates luminol radicals and subsequently light emission, in which the intensity of CL is enhanced in the presence of acetaminophen. In addition, a simple method was developed to detect acetaminophen by static injection CL based on the enhanced CL system of luminol–H₂O₂–HRP by acetaminophen. Experimental conditions, such as pH and concentrations of substrates, have been examined and optimized. The proposed method exhibited good performance, the linear range was from 0.30 to 7.5 mM, the relative standard deviation was 1.86% (n = 10), limit of detection was 0.16 mM and recovery was 99 ± 4%. Copyright © 2013 John Wiley & Sons, Ltd.     

PHOTOSYNTHESIS AND CALCIFICATION BY EMILIANIA HUXLEYI (PRYMNESIOPHYCEAE) AS A FUNCTION OF INORGANIC CARBON SPECIES

To test the possibility of inorganic carbon limitation of the marine unicellular alga Emiliania huxleyi (Lohmann) Hay and Mohler, its carbon acquisition was measured as a function of the different chemical species of inorganic carbon present in the medium. Because these different species are interdependent and covary in any experiment in which the speciation is changed, a set of experiments was performed to produce a multidimensional carbon uptake scheme for photosynthesis and calcification. This scheme shows that CO₂ that is used for photosynthesis comes from two sources. The CO₂ in seawater supports a modest rate of photosynthesis. The HCO is the major substrate for photosynthesis by intracellular production of CO₂ (HCO+ H⁺→ CO₂+ H₂O → CH₂O + O₂). This use of HCO is possible because of the simultaneous calcification using a second HCO, which provides the required proton (HCO+ Ca²⁺→ CaCO₃+ H⁺). The HCO is the only substrate for calcification. By distinguishing the two sources of CO₂ used in photosynthesis, it was shown that E. huxleyi has a K_½ for external CO₂ of “only” 1.9 ± 0.5 μM (and a V_max of 2.4 ± 0.1 pmol·cell⁻¹·d⁻¹). Thus, in seawater that is in equilibrium with the atmosphere ([CO₂]= 14 μM, [HCO]= 1920 μM, at fCO₂= 360 μatm, pH = 8, T = 15° C), photosynthesis is 90% saturated with external CO₂. Under the same conditions, the rate of photosynthesis is doubled by the calcification route of CO₂ supply (from 2.1 to 4.5 pmol·cell⁻¹·d⁻¹). However, photosynthesis is not fully saturated, as calcification has a K_½ for HCO of 3256 ± 1402 μM and a V_max of 6.4 ± 1.8 pmol·cell⁻¹·d⁻¹. The H⁺ that is produced during calcification is used with an efficiency of 0.97 ± 0.08, leading to the conclusion that it is used intracellularly. A maximum efficiency of 0.88 can be expected, as NO uptake generates a H⁺ sink (OH⁻ source) for the cell. The success of E. huxleyi as a coccolithophorid may be related to the efficient coupling between H⁺ generation in calcification and CO₂ fixation in photosynthesis.     

A demonstration that o2− is a crucial intermediate in the high quantum yield luminescence of luminol

The chemiluminescence of luminol, due to its reaction with alkaline H₂O₂, is inhibited by Superoxide dismutase or by hydroxyl radical scavengers. Hematin markedly enhances this H₂O₂-induced luminescence of luminol and lessens, but does not eliminate, the sensitivity towards these inhibitors. Reaction mechanisms are proposed to account for these results. Since luminol luminescence depends upon a reaction between the luminol radical and O₂⁻, and since the luminol radical can reduce dioxygen to O₂⁻, Superoxide dismutase-inhibitable luminol luminescence cannot be reliably used as a detector of O₂⁻ production.     

The effect of pH on chemiluminescence of different probes exposed to superoxide and singlet oxygen generators

The compromised optima for high intensity chemiluminescence (CL), using superoxide generators, were all above pH 9.0 for the CL probes luminol and lucigenin. With luminol the optima were at pH 9.0 and 9.4 for the generators KO₂ and hypoxanthine/xanthine oxidase (HX/XO), respectively. Lucigenin, with the same generators, produced optima at pH 9.5 and 10.0, respectively. The probe methyl-Cypridina-luciferin analogue (MCLA) produced optima closer to neutral pH, which is preferred for physiological assessments. MCLA had optima at pH 6.0, 8.7 and 9.5 with KO₂ and with HX/XO optima at pH 4.8, 6.0, 7.0 and 8.7. When CL was assessed at physiological pH, MCLA observed superoxide radicals with a sensitivity of 100- and 330-fold more than luminol or luicigenin respectively. For singlet oxygen, the sensitivity of MCLA at this pH was 45- and 5465-fold more than for the said probes respectively. H₂O₂ did not elicit CL between pH 4 and 9.5 with any of the probes and did not influence the production of superoxide or singlet oxygen when co-assessed. Therefore CL could only be obtained when enzymes were used as converters. The optima for the enzyme-conversion system horseradish peroxidase (HRP)/H₂O₂, and luminol, were at pH 8.0 and 9.2. Lucigenin and HRP/H₂O₂ also had a biphasic CL profile with optima at pH 7.4 and 9.6. MCLA and HRP/H₂O₂ had five optima, with the major ones at pH 6.1 and beyond 10. The optima for the myeloperoxidase/H₂O system were at 8.6 and beyond 10.0 when luminol and 0.15 mol/L NaBr were used. © 1997 John Wiley & Sons, Ltd.     

Phenol derivatives as enhancers and inhibitors of luminol–H2O2–horseradish peroxidase chemiluminescence

Systematic studies on phenol derivatives facilitates an explanation of the enhancement or inhibition of the luminol–H₂O₂–horseradish peroxidase system chemiluminescence. Factors that govern the enhancement are the one-electron reduction potentials of the phenoxy radicals (PhO^•/PhOH) vs. luminol radicals (L^•/LH⁻) and the reaction rates of the phenol derivatives with the compounds of horseradish peroxidase (HRP-I and HRP-II). Only compounds with radicals with a similar or greater reduction potential than luminol at pH 8.5 (0.8 V) can act as enhancers. Radicals with reduction potentials lower than luminol behave in a different way, because they destroy luminol radicals and inhibit chemiluminescence. The relations between the reduction potential, reaction rates and the Hammett constant of the substituent in a phenol suggest that 4-substituted phenols with Hammett constants (σ) for their substituents similar or greater than 0.20 are enhancers of the luminol–H₂O₂–horseradish peroxidase chemiluminescence. In contrast, those phenols substituted in position 4 for substituents with Hammett constants (σ) lower than 0.20 are inhibitors of chemiluminescence. On the basis of these studies, the structure of possible new enhancers was predicted. © 1998 John Wiley & Sons, Ltd.     

INDUCIBLE MECHANISMS FOR HCO3– UTILIZATION AND REPRESSION OF PHOTORESPIRATION IN PROTOPLASTS AND THALLI OF THREE SPECIES OF ULVA (CHLOROPHYTA)1

Thalli of Ulva reticulata Forskaal, Ulva rigida C. Ag., and Ulva pulchra Jaasund were incubated at different concentrations of dissolved CO₂. Incubation at a high CO₂ concentration resulted in decreased oxygen evolution rate and lower affinity for inorganic carbon at high pH conditions, i.e. the ability to use HCO₃^– as a carbon source was reduced. This effect was reversible, and plants regained this HCO₃^– uptake capacity when transferred to air concentrations of CO₂. The phytosynthetic oxygen evolution rate of plants grown at high CO₂ concentration was reduced by high O₂ concentrations, whereas thalli and protoplasts from cultures grown at air concentration were not affected. This is interpreted as a deactivation of the carbon-concentrating mechanism during conditions of high CO₂ resulting in high photorespiration when plants are exposed to high O₂ concentrations. Protoplasts were not affected by high O₂ to the same extent and were not able to utilize HCO₃^– from the medium. The algae were able to grow at very low CO₂ concentrations, but growth was suppressed when an inhibitor of external carbonic anhydrase was present. Assay of carbonic anhydrase activities showed that external and internal CA activities were lower in plants grown at a high CO₂ concentration compared to plants grown at a low concentration of CO₂. Possible mechanisms for HCO₃^– utilization in these Ulva species are discussed.     

Effects of temperature,photosynthetic photon flux density,photoperiod and O<Subscript>2</Subscript> and CO<Subscript>2</Subscript> concentrations on growth rates of the symbiotic dinoflagellate, <Emphasis Type="Italic">Amphidinium</Emphasis> sp.

Symbiotic dinoflagellates of the species Amphidinium are expected to be pharmaceutically useful microalgae because they produce antitumor macrolides. A microalgae production system with a large number of cells at a high density has been developed for the efficient production of macrolide compounds. In the present study, the effects of culture conditions on the cellular growth rate of dinoflagellates were investigated to determine the optimum culture conditions for obtaining high yields of microalgae. Amphidinium species was cultured under conditions with six temperature levels (21–35°C), six levels of photosynthetic photon flux density (15–70 μmol photons m⁻² s⁻¹), three levels of CO₂ concentration (0.02–0.1%), and three levels of O₂ concentration (0.2–21%). The number of cells cultured in a certain volume of solution was monitored microscopically and the cellular growth rate was expressed as the specific growth rate. The maximum specific growth rate was 0.022 h⁻¹ at a temperature of 26°C and O₂ concentration of 5%, and the specific growth rate was saturated at a CO₂ concentration of 0.05%, a photosynthetic photon flux density of 35 μmol photons m⁻² s⁻¹ and a photoperiod of 12 h day⁻¹ upon increasing each environmental parameter. The results demonstrate that Amphidinium species can multiply efficiently under conditions of relatively low light intensity and low O₂ concentration.     

Kinetic simulation studies on the transient formation of the oxo‐iron(IV) porphyrin radical cation during the reaction of iron(III) tetrakis‐5,10,15,20‐(N‐methyl‐4‐pyridyl)‐porphyrin with hydrogen peroxide in aqueous solution

High‐valent oxo‐iron(IV) species are commonly proposed as the key intermediates in the catalytic mechanisms of iron enzymes. Water‐soluble iron(III) tetrakis‐5,10,15,20‐(N‐methyl‐4‐pyridyl)porphyrin (Fe(III)TMPyP) has been used as a model of heme‐enzyme to catalyse the hydrogen peroxide (H₂O₂) oxidation of various organic compounds. However, the mechanism of the reaction of Fe(III)TMPyP with H₂O₂ has not been fully established. In this study, we have explored the kinetic simulation of the reaction of Fe(III)TMPyP with H₂O₂ and of the catalytic reactivity of FeTMPyP in the luminescent peroxidation of luminol. According to the mechanism that has been established in this work, Fe(III)TMPyP is oxidized by H₂O₂ to produce (TMPyP)^·+Fe(IV)=O (k1 = 4.5 × 10⁴/mol/L/s) as a precursor of TMPyPFe(IV)=O. The intermediate, (TMPyP)^·+Fe(IV)=O, represented nearly 2% of Fe(III)TMPyP but it does not accumulate in suf?cient concentration to be detected because its decay rate is too fast. Kinetic simulations showed that the proposed scheme is capable of reproducing the observed time courses of FeTMPyP in various oxidation states and the decay pro?les of the luminol chemiluminescence. It also shows that (TMPyP)^·+Fe(IV)=O is 100 times more reactive than TMPyPFe(IV)=O in most of the reactions. These two species are responsible for the initial sharp and the sustained luminol emissions, respectively. Copyright © 2003 John Wiley & Sons, Ltd.     

Long‐term chemiluminescence signal is produced in the course of luminol oxidation catalyzed by enhancer‐independent peroxidase purified from Jatropha curcas leaves

Isoenzyme c of horseradish peroxidase (HRP‐C) is widely used in enzyme immunoassay combined with chemiluminescence (CL) detection. For this application, HRP‐C activity measurement is usually based on luminol oxidation in the presence of hydrogen peroxide (H₂O₂). However, this catalysis reaction was enhancer dependent. In this study, we demonstrated that Jatropha curcas peroxidase (JcGP1) showed high efficiency in catalyzing luminol oxidation in the presence of H₂O₂. Compared with HRP‐C, the JcGP1‐induced reaction was enhancer independent, which made the enzyme‐linked immunosorbent assay (ELISA) simpler. In addition, the JcGP1 catalyzed reaction showed a long‐term stable CL signal. We optimized the conditions for JcGP1 catalysis and determined the favorable conditions as follows: 50 mM Tris buffer (pH 8.2) containing 10 mM H₂O₂, 14 mM luminol and 0.75 M NaCl. The optimum catalysis temperature was 30°C. The detection limit of JcGP1 under optimum condition was 0.2 pM. Long‐term stable CL signal combined with enhancer‐independent property indicated that JcGP1 might be a valuable candidate peroxidase for clinical diagnosis and enzyme immunoassay with CL detection. Copyright © 2014 John Wiley & Sons, Ltd.     

The effect of buffers and chelators on the reaction of luminol with Fenton's reagent near neutral pH

The chemiluminescence of the system luminol +Fe²⁺ + H₂O₂ was measured in aqueous buffer at pH 7.2. In veronal (5,5-diethybarbiturate) buffer, the luminescence is strongly quenched by ethanol and mannitol, but only weakly by t-butanol, benzoate and superoxide dismutase (SOD); complexing Fe²⁺ with 1,10-phenanthroline or 2,2′-dipyridyl causes a decrease of light production that can be partially obviated by the simultaneous addition of SOD. In phosphate buffer, the luminescence is higher than in veronal and it is efficiently quenched by all four OH · quenchers and by SOD. In Tris buffer, no light production is observed as long as the Fe²⁺ is not complexed. When Fe²⁺ is complexed by pyrophosphate or phytate, there is a strong chemiluminescence in all three buffers, which is quenched by all four OH · quenchers and by SOD. When Fe²⁺ is complexed by EDTA or DTPA, very little luminescence is observed. The luminol analogue phthalhydrazide, which was suggested by Merényi and Lind as a reliable OH · detector, can replace luminol only in phosphate buffer, and thus turns out to be very specific indeed for free OH ·.     

Influence of initial respiratory status on the short-and long-term activity of the trout red blood cell β-adrenergic Na+/H+ exchanger

The effects of ambient O₂ partial pressure and CO₂ partial pressure on the intensity of rainbow trout (Oncorhynchus mykiss) red blood cell -adrenergic Na⁺/H⁺ exchange were investigated. This was accomplished in vitro by continuously monitoring whole blood extracellular pH, partial pressures of O₂ and CO₂ and by measuring red blood cell water content and Na⁺ concentration before and 30 min after the addition of a catecholamine mixture (final nominal concentrations: 250 nmol·l^-1 adrenaline and 20 nmol·l^-1 noradrenaline). The experiments were performed under six different initial conditions combining two ambient partial pressures of CO₂ (1.50 and 6.75 torr) and three ambient partial pressures of O₂ (15, 30 and 150 torr). The activation of red blood cell Na⁺/H⁺ exchange (as indicated by marked reductions of whole blood pH) was followed by transient reductions in blood partial pressures of CO₂ and O₂ (2 min) resulting from the shift of the CO₂/HCO₃ ^- equilibrium within the cell and the subsequent binding of O₂ to the haemoglobin. The initial reduction in blood CO₂ partial pressure was followed by a rise reflecting the titration of plasma HCO₃ ^- by extruded H⁺. At low partial pressure of CO₂ (1.50 torr) there was a pronounced stimulatory effect of hypoxia on the initial intensity of the extracellular acidification (5 min), whereas at high CO₂ partial pressure (6.75 torr) hypoxia actually lowered the extent of the initial acidification. In all cases, Na⁺/H⁺ exchange activation was accompanied by increases in cell water content and red blood cell Na⁺ levles when measured 30 min after addition of catecholamines. Both hypercapnia and hypoxia increased the magnitude of these changes although the largest changes in cell water content and Na⁺ levels were observed under hypercapnic conditions. Thus, the long-term activity (as determined by measuring cell water and Na⁺ levels) of the Na⁺/H⁺ exchanger was enhanced both by hypercapnia and hypoxia regardless of the initial CO₂ partial pressure. The initial activity (5 min), on the other hand, although stimulated by hypercapnia was influenced by hypoxia in opposing directions depending upon the initial CO₂ partial pressure of the blood.Abbreviations RBC red blood cell(s) - Hb haemoglobin - pHe extracellular pH - P _bCO₂ blood partial pressure of CO₂ - P _bO₂ blood partial pressure of O₂     

Sensitive determination of bromhexine hydrochloride based on its quenching effect on luminol/H2O2 electrochemiluminescence system

In this paper, the electrochemiluminescence (ECL) behavior of luminol/H₂O₂ system in the presence of bromhexine hydrochloride (BrH) was investigated. It was found that the ECL intensity of luminol/H₂O₂ system on a platinum electrode could be intensely quenched by BrH owing to the scavenging superoxide radical ability of BrH, and therefore the sensitive determination of BrH was possible. Under optimal conditions, the quenched ECL intensity was linear to the concentration of BrH in a wide range of 0.08 to 500 μM, with a detection limit of 0.02 μM (signal‐to‐noise ratio (S/N) = 3). This ECL method possessed the merits of rapid, simple and sensitive, and was successfully applied to the BrH quantification in pharmaceutical preparations with satisfactory recoveries of 91.0 ± 4.0 to 106.5 ± 3.4%. The possible route of the quenched ECL of luminol/H₂O₂ in the presence of BrH was also discussed.     

Electrochemical detection of extracellular hydrogen peroxide in Arabidopsis thaliana: a real‐time marker of oxidative stress

An electrochemical approach to directly measure the dynamic process of H₂O₂ release from cultures of Arabidopsis thaliana cells is reported. This approach is based on H₂O₂ oxidation on a Pt electrode in conjunction with continuous measurement of sample pH. For [H₂O₂] <1 mm , calibration plots were linear and the amperometric response of the electrode was maximum at pH 6. At higher concentrations ([H₂O₂] >1 mm ), the amperometric response can be described by Michaelian‐type kinetics and a mathematical expression relating current intensity and pH was obtained to quantitatively determine H₂O₂ concentration. At pH 5.5, the detection limit of the sensor was 3.1 µm (S/N = 3), with a response sensitivity of 0.16 Am ^?1 cm^?2 and reproducibility was within 6.1% in the range 1–5 × 10^?3 m (n = 5). Cell suspensions under normal physiological conditions had a pH between 5.5–5.7 and H₂O₂ concentrations in the range 7.0–20.5 µm (n = 5). The addition of exogenous H₂O₂, as well as other potential stress stimuli, was made to the cells and the change in H₂O₂ concentration was monitored. This real‐time quantitative H₂O₂ analysis is a potential marker for the evaluation of oxidative stress in plant cell cultures.     

Chemiluminescence sensor for sulfonylurea herbicide using molecular imprinted microspheres as recognition element

Uniform molecular imprinting microspheres were prepared using precipitation polymerization with thifensulfuron‐methyl (TFM) as template, acrylamide as functional monomer and ethylene glycol dimethacrylate as cross‐linker. TFM could be selectively adsorbed on the molecularly imprinted polymers (MIPs) matrix through the hydrogen bonding interaction and the adsorbed TFM could be sensed by its strikingly enhancing effect on the weak chemiluminescence (CL) reaction between luminol and hydrogen peroxide. On this basis, a novel CL sensor for the determination of TFM using MIPs as recognition elements was established. The logarithm of net CL intensity (ΔI) is linearly proportional to the logarithm of TFM concentration (C) in the range from 1.0 × 10^?9 to 5.0 × 10^?5 mol L^?1 with a detection limit of 8.3 × 10^?10 mol L^?1 (3σ). The results demonstrated that the MIP–CL sensor was reversible and reusable and that it could strikingly improve the selectivity and sensitivity of CL analysis. Furthermore, it is suggested that the CL enhancement of luminol–H₂O₂ by TFM might be ascribed to the enhancement effect of CO₂, which came from TFM hydrolysis in basic medium. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of optimized chemiluminescence assay for determination of the antioxidant capacity of herbal extracts

A chemiluminescence (CL) assay for the determination of antioxidant capacity (AOC) has been optimized and applied to analyses of herbal extracts in the present study. The optimal concentrations of reagents (luminol, H₂O₂, horseradish peroxidase) have been determined, as well as the optimal reaction conditions (wavelength, pH, temperature, sample volume). All of the measurements were performed at the emission maximum of the oxidized form of luminol (425 nm). The optimal concentrations of the reagents were determined as follows: 1.6 mmol/L luminol, 7.5 mmol/L H₂O₂ and 0.14 U/mL horseradish peroxidase activity in the reaction mixture. Analyses were carried out in phosphate buffer, pH 7.4, at room temperature. With the optimized CL assay, the AOCs of various water and methanol herbal extracts were determined (dog rose hips, plantain leaves and coltsfoot and thyme flowers) and the results were compared to those obtained by other classical methods for the evaluation of antioxidants. Strong correlations (r > 0.9) with the Folin–Ciocalteau assay and the 2,2‐diphenyl‐1‐picrylhydrazyl radical (DPPH)^● assay are confirmed, although there is no correlation between AOC and the concentration of ascorbic acid in the samples analysed. This optimized CL assay is simple, rapid and reliable, and it represents a good alternative to classical methods (Folin–Ciocalteau, DPPH^●) for the determination of AOC of herbal extracts and other food samples. Copyright © 2012 John Wiley & Sons, Ltd.     

Simultaneous determination of isoniazid and p‐aminosalicylic acid by capillary electrophoresis using chemiluminescence detection

It was found that isoniazid (ISO) or p‐aminosalicylic acid (PAS) could enhance the chemiluminescence (CL) emission from Cu (II)‐luminol‐hydrogen peroxide system, and the increased chemiluminescence signals were proportional to their concentrations, respectively. Based on this phenomenon, a chemiluminescence method coupled to capillary electrophoresis (CE) was established for simultaneous determination of ISO and PAS. The CE conditions including running buffer and running voltage were investigated in detail. The effects of the pH of H₂O₂ solution and the concentrations of luminol, H₂O₂ and Cu (II) on the CL signal were also investigated carefully. Under the optimized conditions, the analysis could be accomplished within 10 min, with the limits of detection of 0.3 µg mL^–1 for ISO and 1.1 µg mL^–1 for PAS, corresponding to 7.2 and 26.4 pg per injection (24 nL), respectively. Finally, the method was validated by determining the two analytes in pharmaceutical preparation and spiked human serum samples. The results of pharmaceutical tablet analysis were in good agreement with the labeled amounts. The recoveries for ISO and PAS in human serum were in the range of 92–104% and 90–113%, respectively. Copyright © 2009 John Wiley & Sons, Ltd.