Solution structure of the fifth and sixth transmembrane segments of the mitochondrial oxoglutarate carrier

The structures of the fifth and sixth transmembrane segments of the bovine mitochondrial oxoglutarate carrier (OGC) and of the hydrophilic loop that connects them were studied by CD and NMR spectroscopies. Peptides F215-R246, W279-K305 and P257-L278 were synthesized and structurally characterized. CD data showed that at high concentrations of TFE and SDS all peptides assume alpha-helical structures. (1)H-NMR spectra of the three peptides in TFE/water were fully assigned and the secondary structures of the peptides were obtained from nuclear Overhauser effects, (3)J(aH-NH) coupling constants and alphaH chemical shifts. The three-dimensional solution structures of the peptides were generated by distance geometry calculations. A well-defined alpha-helix was found in the region L220-V243 of peptide F215-R246 (TMS-V), in the region P284-M303 of peptide W279-K305 (TMS-VI) and in the region N261-F275 of peptide P257-L278 (hydrophilic loop). The helix L220-V243 exhibited a sharp kink at P239, while a little bend around P291 was observed in the helical region P284-M303. Fluorescence studies performed on peptide W279-K305, alone and together with other transmembrane segments of OGC, showed that the W279 fluorescence was quenched upon addition of peptide F215-R246, but not of peptides K21-K46, R78-R108 and P117-A149 suggesting a specific interaction between TMS-V and TMS-VI of OGC.     

Solution structure of the first and second transmembrane segments of the mitochondrial oxoglutarate carrier

The structures of the first and the second transmembrane segment of the bovine mitochondrial oxoglutarate carrier (OGC) were studied by circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopies. Peptides 21–46 and 78–108 of its primary sequence were synthesized and structurally characterized in membrane-mimetic environments. CD data showed that at high concentrations of TFE (>50%) and SDS (>2%) both peptides assume α-helical structures, whereas in more hydrophilic environments only peptide 78–108 has a helical structure. ¹H-NMR spectra of the two peptides in TFE/water and SDS were fully assigned, and the secondary structures of the peptides were obtained from nuclear Overhauser effects, ³J_αH-NH coupling constants and αH chemical shifts. The three-dimensional solution structures of the peptides in TFE/water were generated by distance geometry calculations. A well-defined α-helix was found in the region K24-V39 of peptide 21–46 and in the region A86–F106 of peptide 78–108. We cannot exclude that in intact OGC the extension of these helices is longer. The helix of peptide 21–46 is essentially hydrophobic, whereas that of peptide 78–108 is predominantly hydrophilic.     

Solution structure of the first and second transmembrane segments of the mitochondrial oxoglutarate carrier

The structures of the first and the second transmembrane segment of the bovine mitochondrial oxoglutarate carrier (OGC) were studied by circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopies. Peptides 21-46 and 78-108 of its primary sequence were synthesized and structurally characterized in membrane-mimetic environments. CD data showed that at high concentrations of TFE (>50%) and SDS (>2%) both peptides assume alpha-helical structures, whereas in more hydrophilic environments only peptide 78-108 has a helical structure. (1)H-NMR spectra of the two peptides in TFE/water and SDS were fully assigned, and the secondary structures of the peptides were obtained from nuclear Overhauser effects, (3)J(alphaH-NH) coupling constants and alphaH chemical shifts. The three-dimensional solution structures of the peptides in TFE/water were generated by distance geometry calculations. A well-defined alpha-helix was found in the region K24-V39 of peptide 21-46 and in the region A86-F106 of peptide 78-108. We cannot exclude that in intact OGC the extension of these helices is longer. The helix of peptide 21-46 is essentially hydrophobic, whereas that of peptide 78-108 is predominantly hydrophilic.     

Activity and structural comparisons of solution associating and monomeric channel-forming peptides derived from the glycine receptor m2 segment

A number of channel-forming peptides derived from the second transmembrane (TM) segment (M2) of the glycine receptor alpha(1) subunit (M2GlyR), including the 22-residue sequence NK(4)-M2GlyR p22 wild type (WT) (KKKKPARVGLGITTVLTMTTQS), induce anion permeation across epithelial cell monolayers. In vitro assays suggest that this peptide or related sequences might function as a candidate for ion channel replacement therapy in treating channelopathies such as cystic fibrosis (CF). The wild-type sequence forms soluble associations in water that diminish its efficacy. Introduction of a single substitution S22W at the C-terminus, NK(4)-M2GlyR p22 S22W, eliminates the formation of higher molecular weight associations in solution. The S22W peptide also reduces the concentration of peptide required for half-maximal anion transport induced across Madin-Darby canine kidney cells (MDCK) monolayers. A combination of 2D double quantum filtered correlation spectroscopy (DQF-COSY), total correlation spectroscopy (TOCSY), nuclear Overhauser effect spectroscopy (NOESY), and rotating frame nuclear Overhauser effect spectroscopy (ROESY) data were recorded for both the associating WT and nonassociating S22W peptides and used to compare the primary structures and to assign the secondary structures. High-resolution structural studies were recorded in the solvent system (40% 2,2,2-Trifluoroethanol (TFE)/water), which gave the largest structural difference between the two peptides. Nuclear Overhauser effect crosspeak intensity provided interproton distances and the torsion angles were measured by spin-spin coupling constants. These constraints were put into the DYANA modeling program to generate a group of structures. These studies yielded energy-minimized structures for this mixed solvent environment. Structure for both peptides is confined to the 15-residue transmembrane segments. The energy-minimized structure for the WT peptide shows a partially helical extended structure. The S22W peptide adopts a bent conformation forming a hydrophobic pocket by hydrophobic interactions.     

Conformation and environment of channel-forming peptides: a simulation study

Ion channel-forming peptides enable us to study the conformational dynamics of a transmembrane helix as a function of sequence and environment. Molecular dynamics simulations are used to study the conformation and dynamics of three 22-residue peptides derived from the second transmembrane domain of the glycine receptor (NK4-M2GlyR-p22). Simulations are performed on the peptide in four different environments: trifluoroethanol/water; SDS micelles; DPC micelles; and a DMPC bilayer. A hierarchy of alpha-helix stabilization between the different environments is observed such that TFE/water < micelles < bilayers. Local clustering of trifluoroethanol molecules around the peptide appears to help stabilize an alpha-helical conformation. Single (S22W) and double (S22W,T19R) substitutions at the C-terminus of NK4-M2GlyR-p22 help to stabilize a helical conformation in the micelle and bilayer environments. This correlates with the ability of the W22 and R19 side chains to form H-bonds with the headgroups of lipid or detergent molecules. This study provides a first atomic resolution comparison of the structure and dynamics of NK4-M2GlyR-p22 peptides in membrane and membrane-mimetic environments, paralleling NMR and functional studies of these peptides.     

The effect of the cosolvent trifluoroethanol on a tryptophan side chain orientation in the hydrophobic core of troponin C

The unique biophysical properties of tryptophan residues have been exploited for decades to monitor protein structure and dynamics using a variety of spectroscopic techniques, such as fluorescence and nuclear magnetic resonance (NMR). We recently designed a tryptophan mutant in the regulatory N‐domain of cardiac troponin C (F77W‐cNTnC) to study the domain orientation of troponin C in muscle fibers using solid‐state NMR. In our previous study, we determined the NMR structure of calcium‐saturated mutant F77W‐V82A‐cNTnC in the presence of 19% 2,2,2‐trifluoroethanol (TFE). TFE is a widely used cosolvent in the biophysical characterization of the solution structures of peptides and proteins. It is generally assumed that the structures are unchanged in the presence of cosolvents at relatively low concentrations, and this has been verified for TFE at the level of the overall secondary and tertiary structure for several calcium regulatory proteins. Here, we present the NMR solution structure of the calcium saturated F77W‐cNTnC in presence of its biological binding partner troponin I peptide (cTnI_144–163) and in the absence of TFE. We have also characterized a panel of six F77W‐cNTnC structures in the presence and absence TFE, cTnI_144–163, and the extra mutation V82A, and used ¹⁹F NMR to characterize the effect of TFE on the F77(5fW) analog. Our results show that although TFE did not perturb the overall protein structure, TFE did induce a change in the orientation of the indole ring of the buried tryptophan side chain from the anticipated position based upon homology with other proteins, highlighting the potential dangers of the use of cosolvents.     

Identification of coding regions for various Epstein-Barr virus-specific antigens by gene transfer and serology.

Baby hamster kidney cells were transfected with BamHI fragments of Epstein-Barr virus (EBV) DNA (B95-8 strain) cloned into the pLTR vector containing retroviral enhancer and promoter sequences. Seventeen fragments (BamHI-A, -B, -C, -D, -E, -G, -K, -L, -M, -O, -P, -Q, -R, -U, -V, -X, and -Z) expressed antigenically distinct EBV-specific products recognized by EBV-immune human sera.     

Dynamics of the substrate binding pocket in the presence of an inhibitor covalently attached to a fungal lipase

To gain insight into the mobility of the occupied ligand-binding pocket of the Rhizomucor miehei lipase we have conducted a rigorous molecular dynamics analysis. The covalently attached inhibitor, ethylhexylphosphonate, was employed as a mimic of the putative tetrahedral intermediate in the esterolytic reaction. Our results show that in this lipase, ligand recognition is influenced by the flexibility of the binding pocket, a feature that is common to many other enzymes. Several regions around the active site were found to move significantly to adapt to the inhibitor. These motions are correlated to the flexibility of the inhibitor. In particular, the hexyl chain of the inhibitor shows considerable mobility, and adjacent residues in the binding cleft accommodate to this flexibility. Pronounced fluctuations in the binding pocket induced by the flexibility of the inhibitor are observed in the hinge region F79-S82, the active site loop region W88-V95 and the protein regions P209-F215/H257-Y260. The flexibility in the regions F79-S82 and H257-Y260, where the shorter ethyl chain is located, indicates that additional space in this binding cleft region is available for accommodating a larger moiety. Fluctuations in the region W88-V95 and P209-F215 are due to the relatively short flexible hexyl carbon chain. This part of the binding pocket could be stiffened by the presence of a longer carbon chain. Though the inhibitor is covalently attached through the phosphonate moiety, interaction of the remainder of the molecule and the enzyme are determined by hydrophobic interactions, where the Van der Waals energies are approximately 25% lower than the electrostatic contributions.     

Structural modifications in the membrane-bound regions of the gastric H+/K+-ATPase upon ligand binding.

Extensive trypsin proteolysis was used to examine the accessibility of membrane bound segments of the gastric H+/K+-ATPase under different experimental conditions known to induce either the E1 or the E2 conformation. Membrane-anchored peptides were isolated after trypsinolysis and identified by sequencing. We show that several membrane bound segments are involved in the conformational change. In the N-terminal region, a M1-M2 peptide (12 kDa) was found to be associated with the membrane fraction after digestion in the presence of K+ or in the presence of vanadate (12 kDa and 15 kDa). In the M3 and M4 region, no difference was observed for the peptide obtained in E1 or E2-K conformations, but the peptide generated in the presence of vanadate begins 12 amino-acid residues earlier in the sequence. Cytoplasmic loop region: we show here that a peptide beginning at Asp574 and predicted to end at Arg693 is associated with the membrane for a vanadate-induced conformation. In the M5-M6 region, the membrane-anchored peptide obtained on E1 is 39 amino acids shorter than the E2 peptide. In the M7-M8 region, the same peptide encompassing the M7 and M8 transmembrane segments was produced for E1 and E2 conformations.     

Solution conformation study of substance P methyl ester and [Nle10]-neurokinin A (4–10) by nmr spectroscopy

High-resolution proton spectra at 500 MHz of two tachykinin peptides, substance P methyl ester (SPOMe) and [Nle¹⁰]-neurokinin A (4–10), have been obtained in dimethylsulfoxide (DMSO), and for SPOMe, also in 2, 2, 2-trifluoroethanol (TFE)/water mixtures. Complete chemical shift assignments for these peptides were made based on two-dimensional (2D) nmr techniques, correlated spectroscopy and total COSY. J coupling measurement and nuclear Overhauser effect spectroscopy (NOESY) were then used to determine the conformation of these peptides in the various solvents. Based on the J coupling, NOE correlations, and temperature coefficients of the NH resonances, it is concluded that these two peptides exist in DMSO at room temperature as a mixture of conformers that are primarily extended. For SPOMe in TFE/water with high TFE content, however, helical structures are found to be present, and they become quite clear at temperatures between 270 and 280 K. The variation of the ¹³C chemical shifts of the C_α (the secondary shift) with TFE contents corroborates this conclusion. The NOE and C_α shifts show that the main helical region for SPOMe lies between ⁴P and ⁹G. The C-terminus segment L? M? NH₂ is found to be quite flexible, which appears to be quite common for neurokinin-1 selective peptides. © 1993 John Wiley & Sons, Inc.     

Synthesis and secondary structure of loop 4 of myelin proteolipid protein: effect of a point mutation found in Pelizaeus-Merzbacher disease.

To study the effects of a point mutation found in Pelizaeus-Merzbacher disease (PMD) on the physicochemical and structural properties of the extracellular loop 4 of the myelin proteolipid protein (PLP), we synthesized the peptide PLP(181-230)Pro215 and one mutant PLP(181-230)Ser215 with regioselective formation of the two disulphide bridges Cys200-Cys219 and Cys183-Cys227. As conventional amino acid building blocks failed to give crude peptides of good quality we had to optimize the synthesis by introducing pseudoproline dipeptide building blocks during the peptide elongation. In peptide Pro215 the first bridge Cys200-Cys219 was obtained after air oxidation, but in peptide Ser215 because of aggregation, dimethyl sulfoxide (DMSO) oxidation had to be used. The second bridge Cys183-Cys227 was obtained by iodine oxidation of both Cys (acetamidomethyl, Acm)-protected peptides. The secondary structures of the parent and mutant loops were analysed by circular dichroism (CD) in the presence of trifluoroethanol (TFE) and sodium dodecyl sulphate (SDS) as a membrane mimetic. Analysis of the spectra showed that the content of alpha-helix and beta-sheet varied differently for both peptides in TFE and SDS solutions, demonstrating the sensitivity of their conformation to the environment and the differences in their secondary structure. The ability of both peptides to insert into the SDS micelles was assayed by intrinsic tryptophan fluorescence.     

Model peptides mimic the structure and function of the N-terminus of the pore-forming toxin sticholysin II

To investigate the role of the N-terminal region in the lytic mechanism of the pore-forming toxin sticholysin II (St II), we studied the conformational and functional properties of peptides encompassing the first 30 residues of the protein. Peptides containing residues 1-30 (P1-30) and 11-30 (P11-30) were synthesized and their conformational properties were examined in aqueous solution as a function of peptide concentration, pH, ionic strength, and addition of the secondary structure-inducing solvent trifluoroethanol (TFE). CD spectra showed that increasing concentration, pH, and ionic strength led to aggregation of P1-30; as a consequence, the peptide acquired beta-sheet conformation. In contrast, P11-30 exhibited practically no conformational changes under the same conditions, remaining essentially structureless. Moreover, this peptide did not undergo aggregation. These differences clearly point to the modulating effect of the first 10 hydrophobic residues on the peptides aggregation and conformational properties. In TFE both the first ten hydrophobic peptides acquired alpha-helical conformation, albeit to a different extent, P11-30 displayed lower alpha-helical content. P1-30 presented a larger fraction of residues in alpha-helical conformation in TFE than that found in St II's crystal structure for that portion of the protein. Since TFE mimics the membrane environment, such increase in helical content could also occur upon toxin binding to membranes and represent a step in the mechanism of pore formation. The peptides conformational properties correlated well with their functional behavior. Thus, P1-30 exhibited much higher hemolytic activity than P11-30. In addition, P11-30 was able to block the toxin's hemolytic activity. The size of pores formed in red blood cells by P1-30 was estimated by measuring the permeability to PEGs of different molecular mass. The pore radius (0.95 +/- 0.01 nm) was very similar to that of the pore formed by the toxin. The results demonstrate that the synthetic peptide P1-30 is a good model of St II conformation and function and emphasize the contribution of the toxin's N-terminal region, and, in particular, the hydrophobic residues 1-10 to pore formation.     

Induction of antibodies in guinea pigs and rhesus monkeys against the human immunodeficiency virus type 1 envelope: neutralization of nonpathogenic and pathogenic primary isolate simian/human immunodeficiency virus strains

We have compared the abilities of human immunodeficiency virus type 1 (HIV-1) envelope V3 peptides and recombinant gp120 to induce antibodies that neutralize simian/human immunodeficiency viruses (SHIVs). SHIV-89.6 is a nonpathogenic SHIV that expresses the envelope protein of primary HIV-1 isolate 89.6. SHIV-89.6P, clone KB9, is a pathogenic SHIV variant derived from SHIV-89.6. Infection of rhesus monkeys with these SHIVs rarely induces anti-V3 region antibodies. To determine the availability of the gp120 V3 loop for neutralizing antibody binding on SHIV-89.6 and KB9 virions, we have constructed immunogenic C4-V3 peptides from these SHIVs and induced anti-V3 antibodies in guinea pigs and rhesus monkeys. We found that both SHIV-89.6 and KB9 C4-V3 peptides induced antibodies that neutralized SHIV-89.6 but that only SHIV-KB9 C4-V3 peptide induced antibodies that neutralized SHIV-KB9. Immunoprecipitation assays demonstrated that SHIV-KB9 C4-V3 peptide-induced antibodies had a greater ability to bind SHIV-KB9 envelope proteins than did antibodies raised against SHIV-89.6 C4-V3 peptide. We have used a series of mutant HIV-1 envelope constructs to map the gp120 determinants that affect neutralization by anti-V3 antibodies. The residue change at position 305 of arginine (in SHIV-89.6) to glutamic acid (in SHIV-KB9) played a central role in determining the ability of peptide-induced anti-V3 antiserum to neutralize primary isolate SHIVs. Moreover, residue changes in the SHIV-89.6 V1/V2 loops also played roles in regulating the availability of the V3 neutralizing epitope on SHIV-89.6 and -KB9. Thus, SHIV-89.6 and -KB9 V3 region peptides are capable of inducing neutralizing antibodies against these primary isolate SHIVs, although the pathogenic SHIV-KB9 is less easily neutralized than its nonpathogenic variant SHIV-89.6. In contrast to natural infection with SHIV-89.6, in which few animals make anti-V3 antibodies, C4-V3 peptides frequently induced anti-V3 antibodies that neutralized primary isolate SHIV strains.     

Three-dimensional structure in lipid micelles of the pediocin-like antimicrobial peptide sakacin P and a sakacin P variant that is structurally stabilized by an inserted C-terminal disulfide bridge

The three-dimensional structures in dodecylphosphocholine (DPC) micelles and in trifluoroethanol (TFE) of the pediocin-like antimicrobial peptide sakacin P and an engineered variant of sakacin P (termed sakP[N24C+44C]) have been determined by use of nuclear magnetic resonance spectroscopy. SakP[N24C+44C] has an inserted non-native activity- and structure-stabilizing C-terminal disulfide bridge that ties the C-terminus to the middle part of the peptide. In the presence of DPC, the cationic N-terminal region (residues 1-17) of both peptides has an S-shaped conformation that is reminiscent of a three-stranded antiparallel beta-sheet and that is more pronounced when the peptide was dissolved in TFE instead of DPC. The four positively charged residues located in the N-terminal part are found pointing to the same direction. For both peptides, the N-terminal region is followed by a well-defined central amphiphilic alpha-helix (residues 18-33), and this in turn is followed by the C-terminal tail (residues 34-43 for sakacin P and 34-44 for sakP[N24C+44C]) that lacks any apparent common secondary structural motif. In the presence of DPC, the C-terminal tails in both peptides fold back onto the central alpha-helix, thereby creating a hairpin-like structure in the C-terminal halves. The lack of long-range NOEs between the beta-sheet Nu-terminal region and the hairpin-like C-terminal half indicates that there is a flexible hinge between these regions. We discuss which implications such a structural arrangement has on the interaction with the target cell membrane.     

Amino acid identity and/or position determines the proteasomal cleavage of the HLA-A*0201-restricted peptide tumor antigen MAGE-3271-279

The proteasome plays a crucial role in the proteolytic processing of antigens presented to T cells in the context of major histocompatibility complex class I molecules. However, the rules governing the specificity of cleavage sites are still largely unknown. We have previously shown that a cytolytic T lymphocyte-defined antigenic peptide derived from the MAGE-3 tumor-associated antigen (MAGE-3(271-279), FLWGPRALV in one-letter code) is not presented at the surface of melanoma cell lines expressing the MAGE-3 protein. By using purified proteasome and MAGE-3(271-279) peptides extended at the C terminus by 6 amino acids, we identified predominant cleavages after residues 278 and 280 but no detectable cleavage after residue Val(279), the C terminus of the antigenic peptide. In the present study, we have investigated the influence of Pro(275), Leu(278), and Glu(280) on the proteasomal digestion of MAGE-3(271-285) substituted at these positions. We show that positions 278 and 280 are major proteasomal cleavage sites because they tolerate most amino acid substitutions. In contrast, the peptide bond after Val(279) is a minor cleavage site, influenced by both distal and proximal amino acid residues.     

Peptide based vaccine design: synthesis and immunological characterization of branched polypeptide conjugates comprising the 276-284 immunodominant epitope of HSV-1 glycoprotein D.

The importance of the length and conjugation site of a protective epitope peptide (276SALLEDPVG284) from glycoprotein D of herpes simplex virus in branched polypeptide conjugates has been investigated. A new set of peptides, with a single attachment site and truncated sequences, was prepared. The immunogenicity of conjugates and the specificity of antibody responses elicited were investigated in BALB/c, C57/B1/6 and CBA mice. It was found that the covalent coupling of the peptide comprising the 276-284 sequence of gD through its Asp residue at position 281 did not influence the immunogenic properties of the epitope, while involvement of the side chain of Glu at position 280 almost completely abolished immunogenicity. These results clearly indicated that the conjugation site of the epitope peptide influenced the intensity and specificity of antibody responses. Comparison of the immunological properties of conjugates containing truncated gD peptides revealed the presence of two epitopes within the 276-284 region. One of the proposed epitopes is situated at the N-terminal (276-281) region, while the other is located at the C-terminal end of the sequence (279-284). Binding data demonstrated that some of the peptides comprising these epitopes induced gD-specific responses in their conjugated form and also elicited an immune response that conferred protection against lethal HSV-1 infection. The correlation of peptide- and gD-specific antibody responses with the protective effect of the immune response is discussed.     

Increased methionine sulfoxide content of apoA-I in type 1 diabetes

Cardiovascular disease is a major cause of morbidity and premature mortality in diabetes. HDL plays an important role in limiting vascular damage by removing cholesterol and cholesteryl ester hydroperoxides from oxidized low density lipoprotein and foam cells. Methionine (Met) residues in apolipoprotein A-I (apoA-I), the major apolipoprotein of HDL, reduce peroxides in HDL lipids, forming methionine sulfoxide [Met(O)]. We examined the extent and sites of Met(O) formation in apoA-I of HDL isolated from plasma of healthy control and type 1 diabetic subjects to assess apoA-I exposure to lipid peroxides and the status of oxidative stress in the vascular compartment in diabetes. Three tryptic peptides of apoA-I contain Met residues: Q(84)-M(86)-K(88), W(108)-M(112)-R(116), and L(144)-M(148)-R(149). These peptides and their Met(O) analogs were identified and quantified by mass spectrometry. Relative to controls, Met(O) formation was significantly increased at all three locations (Met(86), Met(112), and Met(148)) in diabetic patients. The increase in Met(O) in the diabetic group did not correlate with other biomarkers of oxidative stress, such as N(epsilon)-malondialdehyde-lysine or N(epsilon)-(carboxymethyl)lysine, in plasma or lipoproteins. The higher Met(O) content in apoA-I from diabetic patients is consistent with increased levels of lipid peroxidation products in plasma in diabetes. Using the methods developed here, future studies can address the relationship between Met(O) in apoA-I and the risk, development, or progression of the vascular complications of diabetes.     

Solution conformations of peptides representing the sequence of the toxin pardaxin and analogues in trifluoroethanol-water mixtures: Analysis of CD spectra

The cytolytic activities and conformational properties of pardaxin (GFFALIPKIISSPLFKTLLSAVGSALSSSGEQE), a 33-residue linear peptide that exhibits unusual shark repellent and cytolytic activities, and its analogues have been examined in aqueous environment and trifluoroethanol (TFE) using CD spectroscopy. A peptide corresponding to the 1–26 segment and an analogue where P7 has been changed to A show greater hemolytic activity than pardaxin. While the peptide corresponding to the N-terminal 18-residue segment does not exhibit hemolytic activity, its analogue where P7 is replaced by A is hemolytic. The secondary structural propensities of the peptides were inferred by deconvolution of the experimental spectra into pure components. Pardaxin, its variant where proline at position 7 was replaced by alanine, and shorter peptides corresponding to N-terminal segments exist in multiple conformations in aqueous medium that are comprised of β-turn, β-sheet, and distorted helical structures. With increasing proportions of TFE, while helical conformation predominates in all the peptides, both distorted and the regular α-helices appear to be populated. Analysis of CD spectra by deconvolution methods appears to be a powerful tool for delineating multiple conformations in peptides, especially membrane-active peptides that encounter media of different polarity ranging from aqueous environment to one of low dielectric constant in the hydrophobic interior of membranes. Our study provides further insights into the structural requirements for the biological activity of pardaxin and related peptides. © 1997 John Wiley & Sons, Inc. Biopoly 41: 635–645, 1997     

Fluorescence spectroscopy of soluble E. coli SPase I Δ2‐75 reveals conformational changes in response to ligand binding

The bacterial Sec pathway is responsible for the translocation of secretory preproteins. During the later stages of transport, the membrane‐embedded signal peptidase I (SPase I) cleaves the signal peptide from a preprotein. We used tryptophan fluorescence spectroscopy of a soluble, catalytically active E. coli SPase I Δ2‐75 enzyme to study its dynamic conformational changes while in solution and when interacting with lipids and signal peptides. We generated four single Trp SPase I Δ2‐75 mutants, W261, W284, W300, and W310. Based on fluorescence quenching experiments, W300 and W310 were found to be more solvent accessible than W261 and W284 in the absence of ligands. W300 and W310 inserted into lipids, consistent with their location at the enzyme's proposed membrane‐interface region, while the solvent accessibilities of W261, W284, and W300 were modified in the presence of signal peptide, suggesting propagation of structural changes beyond the active site in response to peptide binding. The signal peptide binding affinity for the enzyme was measured via FRET experiments and the K_d determined to be 4.4 μM. The location of the peptide with respect to the enzyme was also established; this positioning is crucial for the peptide to gain access to the enzyme active site as it emerges from the translocon into the membrane bilayer. These studies reveal enzymatic structural changes required for preprotein proteolysis as it interacts with its two key partners, the signal peptide and membrane phospholipids. Proteins 2014; 82:596–606. © 2013 Wiley Periodicals, Inc.     

Target-induced conformational adaptation of calmodulin revealed by the crystal structure of a complex with nematode Ca(2+)/calmodulin-dependent kinase kinase peptide.

Calmodulin (CaM) is a ubiquitous calcium (Ca(2+)) sensor which binds and regulates protein serine/threonine kinases along with many other proteins in a Ca(2+)-dependent manner. For this multi-functionality, conformational plasticity is essential; however, the nature and magnitude of CaM's plasticity still remains largely undetermined. Here, we present the 1.8 A resolution crystal structure of Ca(2+)/CaM, complexed with the 27-residue synthetic peptide corresponding to the CaM-binding domain of the nematode Caenorhabditis elegans Ca(2+)/CaM-dependent kinase kinase (CaMKK). The peptide bound in this crystal structure is a homologue of the previously NMR-derived complex with rat CaMKK, but benefits from improved structural resolution. Careful comparison of the present structure to previous crystal structures of CaM complexed with unrelated peptides derived from myosin light chain kinase and CaM kinase II, allow a quantitative analysis of the differences in the relative orientation of the N and C-terminal domains of CaM, defined as a screw axis rotation angle ranging from 156 degrees to 196 degrees. The principal differences in CaM interaction with various peptides are associated with the N-terminal domain of CaM. Unlike the C-terminal domain, which remains unchanged internally, the N-terminal domain of CaM displays significant differences in the EF-hand helix orientation between this and other CaM structures. Three hydrogen bonds between CaM and the peptide (E87-R336, E87-T339 and K75-T339) along with two salt bridges (E11-R349 and E114-K334) are the most probable determinants for the binding direction of the CaMKK peptide to CaM.