Membrane-bound ARF1 peptide: interpretation of neutron diffraction data by molecular dynamics simulation methods

Adenosine diphosphate ribosylation factor-1 (ARF1) is activated by cell membrane binding of a self-folding N-terminal domain. We have previously presented four possible conformations of the membrane bound, human ARF1 N-terminal peptide in planar lipid bilayers of DOPC and DOPG (7:3 molar ratio), determined from lamellar neutron diffraction and circular dichroism data. In this paper we analyse the four possible conformations by molecular dynamics simulations. The aim of these simulations was to use MD to distinguish which of the four possible membrane bound structures was the most likely. The most likely conformation was determined according to the following criteria: (a) location of label positions on the peptide in relation to the bilayer, (b) lowest mean square displacement from the initial structure, (c) lowest system energy, (d) most peptide-lipid headgroup hydrogen bonding, (e) analysis of phi/psi angles of the peptide. These findings demonstrate the application of molecular dynamics simulations to explore neutron diffraction data.     

Exploring single-domain antibody thermostability by molecular dynamics simulation

Abstract

Single-domain antibodies also known as nanobodies are recombinant antigen-binding domains that correspond to the heavy-chain variable region of camelid antibodies. Previous experimental studies showed that the nanobodies have stable and active structures at high temperatures. In this study, the thermal stability and dynamics of nanobodies have been studied by employing molecular dynamics simulation at different temperatures. Variations in root mean square deviation, native contacts, and solvent-accessible surface area of the nanobodies during the simulation were calculated to analyze the effect of different temperatures on the overall conformation of the nanobody. Then, the thermostability mechanism of this protein was studied through calculation of dynamic cross-correlation matrix, principal component analyses, native contact analyses, and root mean square fluctuation. Our results manifest that the side chain conformation of some residues in the complementarity-determining region 3 (CDR3) and also the interaction between α-helix region of CDR3 and framework2 play a critical role to stabilize the protein at a high temperature.

Communicated by Ramaswamy H. Sarma     

Cation redistribution upon dehydration of Na58Y faujasite zeolite: a joint neutron diffraction and molecular simulation study

Using neutron scattering and Monte Carlo simulation, we investigate the distribution of cations in Na₅₈Y faujasite upon (de)hydration. We introduce a new method for the assignment of cations to specific sites in molecular simulations from their local environment. This allows us to bypass the need of the coordinates of crystallographic sites, which vary as water adsorption induces changes in the zeolite framework structure. Although the agreement between experiments and simulation is excellent at high temperature, some differences are observed below 150°C. We show that these differences are due to the presence of water and that temperature itself as well as adsorption-induced deformation of the framework play a less important role. We demonstrate the migration of sodium to sites III upon water adsorption, not observed for other Si:Al ratios.     

Molecular dynamics simulation of hydration in myoglobin

This study was carried out to evaluate the stability of the 89 bound water molecules that were observed in the neutron diffraction study of CO myoglobin. The myoglobin structure derived from the neutron analysis was used as the starting point in the molecular dynamics simulation using the software package CHARMM. After solvation of the protein, energy minimization and equilibration of the system, 50 ps of Newtonian dynamics was performed. This data showed that only 4 water molecules are continously bound during the length of this simulation while the other solvent molecules exhibit considerable mobility and are breaking and reforming hydrogen bonds with the protein. At any instant during the simulation, 73 of the hydration sites observed in the neutron structure are occupied by water. © 1995 Wiley-Liss, Inc.     

Water activity coefficients in aqueous amino acid solutions by molecular dynamics simulation: 1. Force field development

New force fields for molecular dynamics (MD) simulation of aqueous zwitterionic amino acid simulations were developed. These were especially designed to calculate activity coefficient of water in amino acid solutions with high accuracy. For example, aqueous solutions of the following amino acids were considered: glycine, alanine, α-aminobutyric acid, α-aminovalerianic acid, valine and leucine. The force fields were obtained by quantum chemical calculations using B3LYP/6-31G and MP2/6-311(d,p) model theories in combination with the Merz–Kollmann–Singh scheme. To further increase the accuracy of the force field, a polarised continuum was considered in all quantum chemical calculations. Water activity coefficients obtained from MD using different all-purpose literature force fields, namely, OPLS, AMBER ff03 and GROMOS 53A6 as well as experimental data are compared with the results utilising the new force field. The new force field is shown to give better results compared with experimental data than existing force fields.     

Understanding interaction and dynamics of water molecules in the epoxy via molecular dynamics simulation

The robust structural integrity of the epoxy plays an important role in ensuring the long-term service life of its applications, which is affected by the absorbed moisture. In order to understand the mechanism of the moisture effect, the knowledge of the interaction and dynamics of the water molecules inside the epoxy is of great interest. Molecular dynamics simulation is used in this work to investigate the structure and bonding behaviour of the water molecules in the highly cross-linked epoxy network. When the moisture concentration is low, the water molecules are well dispersed in the cross-linked structure and located in the vicinity of the epoxy functional groups, which predominantly form the hydrogen bond (H-bond) with the epoxy network, resulting in the low water mobility in the epoxy. At the high concentration, the water favourably forms the large cluster due to the predominant water–water H-bond interaction, and the water molecules diffuse primarily inside the cluster, which leads to the high water mobility and the accelerated H-bond dynamics. The variation of the bonding behaviour and dynamics of the water molecules reported here could be exploited to understand the material change and predict the long-term performance of the epoxy-based products during the intended service life.     

Discovery of promising FtsZ inhibitors by E-pharmacophore, 3D-QSAR,molecular docking study,and molecular dynamics simulation

Filamentous temperature-sensitive protein Z (FtsZ), playing a key role in bacterial cell division, is regarded as a promising target for the design of antimicrobial agent. This study is looking for potential high-efficiency FtsZ inhibitors. Ligand-based pharmacophore and E-pharmacophore, virtual screening and molecular docking were used to detect promising FtsZ inhibitors, and molecular dynamics simulation was used to study the stability of protein-ligand complexes in this paper. Sixty-three inhibitors from published literatures with pIC₅₀ ranging from 2.483 to 5.678 were collected to develop ligand-based pharmacophore model. 4DXD bound with 9PC was selected to develop the E-pharmacophore model. The pharmacophore models validated by test set method and decoy set were employed for virtual screening to exclude inactive compounds against ZINC database. After molecular docking, ADME analysis, IFD docking and MM-GBSA, 8 hits were identified as potent FtsZ inhibitors. A 50?ns molecular dynamics simulation was implemented on the compounds to assess the stability between potent inhibitors and FtsZ. The results indicated that the candidate compounds had a high docking score and were strongly combined with FtsZ by forming hydrogen bonding interactions with key amino acid residues, and van der Waals forces and hydrophobic interactions had significant contribution to the stability of the binding. Molecular dynamics simulation results showed that the protein-ligand compounds performed well in both the stability and flexibility of the simulation process.     

Dynamic injection behaviour of carbon monoxide nano-jets: analysis based on molecular dynamics simulation

Molecular dynamics simulation was used to characterise the dynamical injection behaviour of CO through a gold nano-injector with a Gr coating. We also varied the nozzle outlet size, system temperature, and extrusion velocity to elucidate their influence on the flow patterns, injection pressure, and flow rate of the CO nano-jets. Simulation results revealed the following important findings. (1) At 100?K, the liquefaction of a CO jet led to a wider spray angle (ø_s?=?84～96°) and allowed molecules to attach to the Gr layer, resulting in agglomeration at the orifice. (2) At 500?K and 55.824?m/s, the nebulisation of the CO nano-jet was induced, which produced a narrower spray angle (ø_s?=?47°). (3) The flow rate of CO molecules was essentially linear under the following conditions: low extrusion velocity (≤13.956?m/s), large orifice (d?=?1.5?nm), and high system temperature (≥300?K). (4) Due to the compressibility of CO molecules, the pressure inside the chamber under a high extrusion speed (≥27.912?m/s) presented a sharp increase in the middle and final extrusion stages. A delay in the pressure increase enabled the liquefaction of the extruded CO molecules, resulting in an unstable flow rate.     

Conformation of nifedipine in hydrated 1,2-di-myristoyl-sn-glycero-3-phosphorylcholine bilayer molecular dynamics simulation

The conformation of nifedipine, a cardiac and smooth muscle calcium ion channel antagonist is studied in a hydrated bilayer of forty nine 1,2-di-myristoyl-sn-glycero-3-phosphorylcho-line (DMPC) molecules using molecular dynamics (MD) simulation technique. The simulation was carried out in conditions of constant number, volume and temperature (NVT) at 310 K, which is above the liquid crystalline (Lα) transition temperature of DMPC. The periodic boundary conditions were applied in three-dimensions. Thus the model represented an infinite bilayer. The important geometric parameters characteristic to DMPC and nifedipine molecules were calculated and compared with other theoretical and experimental results pertaining to nifedipine and other related dihydrophyridine (DHP) analogues. Our results suggest that conformational parameters required for antagonist activity are fairly conserved during the interaction of nifedipine with DMPC bilary and bilayer stabilizes the drug conformation in the bioactive form.     

New potential inhibitors of mTOR: a computational investigation integrating molecular docking,virtual screening and molecular dynamics simulation

The mTOR (mammalian or mechanistic Target Of Rapamycin), a complex metabolic pathway that involves multiple steps and regulators, is a major human metabolic pathway responsible for cell growth control in response to multiple factors and that is dysregulated in various types of cancer. The classical inhibition of the mTOR pathway is performed by rapamycin and its analogs (rapalogs). Considering that rapamycin binds to an allosteric site and performs a crucial role in the inhibition of the mTOR complex without causing the deleterious side effects common to ATP-competitive inhibitors, we employ ligand-based drug design strategies, such as virtual screening methodology, computational determination of ADME/Tox properties of selected molecules, and molecular dynamics in order to select molecules with the potential to become non-ATP-competitive inhibitors of the mTOR enzymatic complex. Our findings suggest five novel potential mTOR inhibitors, with similar or better properties than the classic inhibitor complex, rapamycin.     

Membrane partitioning of peptide aggregates: coarse-grained molecular dynamics simulations

Abstract

Coarse-grained molecular dynamics (CGMD) simulation technique (MARTINI force field) is applied to monitor the aggregation of helical peptides representing the transmembrane sequence and its extension of bone marrow stromal cell antigen 2 (BST-2). One of the peptides is coupled with a protein transducing domain (PTD) of nine arginine residues (R9) at its N-terminal side as well as a peptide, pep11**, which has been shown to bind to human papilloma virus 16 (HPV16) E6 oncoprotein. A short hydrophobic stretch of the transmembrane domain (TMD) of BST-2 aggregates the fastest and inserts into a lipid membrane. An aggregate of R9-pep11** attaches to the membrane via simultaneous contact of many arginine residues. Monomers from the aggregates of the shortest of the hydrophobic TMDs dissolve into the opposing leaflet when the aggregate spans the bilayer. A ‘flipping’ of the individual monomeric peptides is not observed.

Communicated by Ramaswamy H. Sarma     

A comparison of the electromechanical properties of structurally diverse proteins by molecular dynamics simulation

Proteins are subjected to electric fields both within the cell and during routine biochemical analysis. We have used atomistic molecular dynamics simulations to study conformational changes within three structurally diverse proteins subjected to high electric fields. At electric fields in excess of .5?V/nm, major structural changes were observed in all three proteins due to charge redistribution within the biomolecule. However, the electromechanical resilience was found to be highly dependent on the protein secondary structure, with α-helices showing a particularly high susceptibility to deformation by the applied electric field.     

Incoherent neutron scattering of copper azurin: a comparison with molecular dynamics simulation results

The low-frequency dynamics of copper azurin has been studied at different temperatures for a dry and deuterium hydrated sample by incoherent neutron scattering and the experimental results have been compared with molecular dynamics (MD) simulations carried out in the same temperature range. Experimental Debye-Waller factors are consistent with a dynamical transition at approximately 200 K which appears partially suppressed in the dry sample. Inelastic and quasielastic scattering indicate that hydration water modulates both vibrational and diffusive motions. The low-temperature experimental dynamical structure factor of the hydrated protein shows an excess of inelastic scattering peaking at about 3 meV and whose position is slightly shifted downwards in the dry sample. Such an excess is reminiscent of the “boson peak” observed in glass-like materials. This vibrational peak is quite well reproduced by MD simulations, although at a lower energy. The experimental quasielastic scattering of the two samples at 300 K shows a two-step relaxation behaviour with similar characteristic times, while the corresponding intensities differ only by a scale factor. Also, MD simulations confirm the two-step diffusive trend, but the slow process seems to be characterized by a decay faster than the experimental one. Comparison with incoherent neutron scattering studies carried out on proteins having different structure indicates that globular proteins display common elastic, quasielastic and inelastic features, with an almost similar hydration dependence, irrespective of their secondary and tertiary structure. Received: 12 October 1998 / Revised version: 19 February 1999 / Accepted: 1 March 1999     

Atomic insight into designed carbamate-based derivatives as acetylcholine esterase (AChE) inhibitors: a computational study by multiple molecular docking and molecular dynamics simulation

Over 100 variants have been designed and studied, using multiple docking methods such as Autodock Vina, ArgusLab, Molegro Virtual Docker, and Hex-Cuda, to study the effect of alteration in the structure of carbamate-based acetylcholyne esterase (AChE) inhibitors. Sixteen selected systems were then subjected to 14 ns molecular dynamics (MD) simulations. Results from all the docking methods are in agreement. Variants that involved biphenyl substituents possess the most negative binding energies in the ?37.64 to ?39.31 kJ mol^?1 range due to their π–π interactions with AChE aromatic residues. The root mean square deviation values showed that all of these components achieved equilibration after 6 ns. Gyration radius (R_g) and solvent accessibility surface area were calculated to further investigate the AChE conformational changes in the presence of these components. MD simulation results suggested that these components might interact with AChE, possibly with no major changes in AChE secondary and tertiary structures.     

Force-induced unfolding of human telomeric G-quadruplex: A steered molecular dynamics simulation study

We study the unfolding of a parallel G-quadruplex from human telomeric DNA by mechanical stretching using steered molecular dynamics (MD) simulation. We find that the force curves and unfolding processes strongly depend on the pulling sites. With pulling sites located on the sugar-phosphate backbone, the force-extension curve shows a single peak and the unfolding proceeds sequentially. Pulling sites located on the terminal nucleobases lead to a force-extension curve with two peaks and the unfolding is more cooperative. Simulations of the refolding of partially unfolded quadruplexes show very different behavior for the two different pulling modalities. In particular, starting from an unfolded state prepared by nucleobase pulling leads to a long-lived intermediate state whose existence is also corroborated by the free energy profile computed with the Jarzynski equation. Based on this observation, we propose a novel folding pathway for parallel G-quadruplexes with the human telomere sequence.     

Complex disruption effect of natural polyphenols on Bcl-2-Bax: molecular dynamics simulation and essential dynamics study

Apoptosis (programmed cell death) is a process by which cells died after completing physiological function or after a severe genetic damage. Apoptosis is mainly regulated by the Bcl-2 family of proteins. Anti apoptotic protein Bcl-2 prevents the Bax activation/oligomerization to form heterodimer which is responsible for release of the cytochrome c from mitochondria to the cytosol in response to death signal. Quercetin and taxifolin (natural polyphenols) efficiently bound to hydrophobic groove of Bcl-2 and altered the structure by inducing conformational changes. Taxifolin was found more efficient when compared to quercetin in terms of interaction energy and collapse of hydrophobic groove. Taxifolin and quercetin were found to dissociate the Bcl-2-Bax complex during 12?ns MD simulation. The effect of taxifolin and quercetin was, further validated by the MD simulation of ligand-unbound Bcl-2-Bax which showed stability during the simulation. Obatoclax (an inhibitor of Bcl-2) had no significant dissociation effect on Bcl-2-Bax during simulation which favored the previous experimental results and disruption effect of taxifolin and quercetin.     

Effect of gold nanoparticle on stability of the DNA molecule: A study of molecular dynamics simulation

An understanding of the mechanism of DNA interactions with gold nanoparticles is useful in today medicine applications. We have performed a molecular dynamics simulation on a B-DNA duplex (CCTCAGGCCTCC) in the vicinity of a gold nanoparticle with a truncated octahedron structure composed of 201 gold atoms (diameter ～1.8 nm) to investigate gold nanoparticle (GNP) effects on the stability of DNA. During simulation, the nanoparticle is closed to DNA and phosphate groups direct the particles into the major grooves of the DNA molecule. Because of peeling and untwisting states that are occur at end of DNA, the nucleotide base lies flat on the surface of GNP. The configuration entropy is estimated using the covariance matrix of atom-positional fluctuations for different bases. The results show that when a gold nanoparticle has interaction with DNA, entropy increases. The results of conformational energy and the hydrogen bond numbers for DNA indicated that DNA becomes unstable in the vicinity of a gold nanoparticle. The radial distribution function was calculated for water hydrogen–phosphate oxygen pairs. Almost for all nucleotide, the presence of a nanoparticle around DNA caused water molecules to be released from the DNA duplex and cations were close to the DNA.     

Molecular dynamics simulation of the membrane binding and disruption mechanisms by antimicrobial scorpion venom-derived peptides

Pandinin 2 (Pin2) is an alpha-helical polycationic peptide, identified and characterized from venom of the African scorpion Pandinus imperator with high antimicrobial activity against Gram-positive bacteria and less active against Gram-negative bacteria, however it has demonstrated strong hemolytic activity against sheep red blood cells. In the chemically synthesized Pin2GVG analog, the GVG motif grants it low hemolytic activity while keeping its antimicrobial activity. In this work, we performed 12 μs all-atom molecular dynamics simulation of the antimicrobial peptides (AMPs) Pin2 and Pin2GVG to explore their adsorption mechanism and the role of their constituent amino acid residues when interacting with pure POPC and pure POPG membrane bilayers. Starting from an α-helical conformation, both AMPs are attracted at different rates to the POPC and POPG bilayer surfaces due to the electrostatic interaction between the positively charged amino acid residues and the charged moieties of the membranes. Since POPG is an anionic membrane, the PAMs adhesion is stronger to the POPG membrane than to the POPC membrane and they are stabilized more rapidly. This study reveals that, before the insertion begins, Pin2 and Pin2GVG remained partially folded in the POPC surface during the first 300 and 600 ns, respectively, while they are mostly unfolded in the POPG surface during most of the simulation time. The unfolded structures provide for a large number of intermolecular hydrogen bonds and stronger electrostatic interactions with the POPG surface. The results show that the aromatic residues at the N-terminus of Pin2 initiate the insertion process in both POPC and POPG bilayers. As for Pin2GVG in POPC the C-terminus residues seem to initiate the insertion process while in POPG this process seems to be slowed down due to a strong electrostatic attraction. The membrane conformational effects upon PAMs binding are measured in terms of the area per lipid and the contact surface area. Several replicas of the systems lead to the same observations.     

Differential dynamics of the serotonin1A receptor in membrane bilayers of varying cholesterol content revealed by all atom molecular dynamics simulation

Abstract

The serotonin_1A receptor belongs to the superfamily of G protein-coupled receptors (GPCRs) and is a potential drug target in neuropsychiatric disorders. The receptor has been shown to require membrane cholesterol for its organization, dynamics and function. Although recent work suggests a close interaction of cholesterol with the receptor, the structural integrity of the serotonin_1A receptor in the presence of cholesterol has not been explored. In this work, we have carried out all atom molecular dynamics simulations, totaling to 3?μs, to analyze the effect of cholesterol on the structure and dynamics of the serotonin_1A receptor. Our results show that the presence of physiologically relevant concentration of membrane cholesterol alters conformational dynamics of the serotonin_1A receptor and, on an average lowers conformational fluctuations. Our results show that, in general, transmembrane helix VII is most affected by the absence of membrane cholesterol. These results are in overall agreement with experimental data showing enhancement of GPCR stability in the presence of membrane cholesterol. Our results constitute a molecular level understanding of GPCR-cholesterol interaction, and represent an important step in our overall understanding of GPCR function in health and disease.     

A niosomal bilayer of sorbitan monostearate in complex with flavones: a molecular dynamics simulation study

Bilayers prepared from sorbitan fatty acid esters (Span) have been frequently used for delivery of drugs including flavonoids. We applied molecular dynamics simulation to characterize the structure of a sorbitan monostearate (Span 60) bilayer in complex with three representative flavones, a subclass of flavonoids. At a low concentration, unsubstituted flavone, the most hydrophobic member, was able to flip over and cross the bilayer with a large diffusion coefficient. At a high concentration, it was accumulated at the bilayer center resulting in a phase separation. The leaflets of the bilayer were pushed in the opposite directions increasing the membrane thickness. Order parameter of the stearate chain of Span 60 was not affected significantly by unsubstituted flavone. In contrast, chrysin with hydroxylated ring A was lined up with the acyl chains of Span 60 with its hydroxyl group facing the membrane surface. Neither flipping nor transbilayer movement were allowed. Diffusion coefficient was only 15–25% of that of unsubstituted flavone and order parameter decreased with the concentration of chrysin. Luteolin, the most hydroxylated member, interacted mainly with the headgroup of Span 60 and assumed many different orientations without crossing the bilayer. Unlike chrysin and unsubstituted flavone the bilayer integrity was disrupted at 50?mol% luteolin. These behaviors and structures of flavones in a Span 60 bilayer can be accounted for by their hydrophobicity and sites of hydroxylation.