稻米碾磨品质性状遗传主效应及其与环境互作的遗传分析

采用包括遗传主效应和基因型与环境互作效应的种子三倍体遗传模型,分析了不同环境条件下籼稻稻米碾磨品质的遗传特性。结果表明,各碾磨品质性状除了受制于种子基因效应、细胞质效应和母体植株基因效应等遗传主效应外,还会明显受到各遗传效应与环境互作效应的影响。其中精米重和精米率两个性状的表现主要是以遗传主效应为主,而糙米重和糙米率则以基因型ｘ环境互作效应为主。在各遗传体系中,除了精米率性状的种子直接遗传效应与环境的互作效应略大于母体植株遗传效应与环境的互作效应外,其他碾磨品质性状的母体植株基因的表达受环境条件的影响程度要大于种子基因。细胞质ｘ环境互作效应对精米重和糙米率的影响也较为重要。遗传效应预测值结果表明,Ｐ７和Ｐ８两个亲本的遗传主效应表现突出,可以明显改良杂交后代多数碾磨品质性状。Ｐ１和Ｐ２两个亲本的碾磨品质性状预测值在两年中的环境互作效应较为－致,不易受到外界条件的影响。上述亲本在水稻品质育种中可加以利用。     

小麦种质抗倒性的评价和抗倒性状的相关与通径分析

对９６份小麦种质资源的抗倒性进行了鉴定评价,筛选出高抗型材料９份,其中４份是丰源,表明抗倒性能够与丰产性状很好地协调结合。对抗倒性状的相关分析表明,在株高相差较大的情况下,株高和重心高度对抗倒性十分重要。但在对株高相差不大的情况下,茎秆的机械强度是主要决定因素,对于株高较高的材料,重心高度对抗倒性有较大影响;对于较矮的材料,基部第一节间长度则较为重要。通径分析结果进一步表明,茎秆机械强度对抗倒性的     

水稻株形对纹枯病抗性的影响

利用240份源于珍汕97B／明恢63的重组自交系水稻(Oryza sativa L.)群体,连续2年调查纹枯病病级与水稻生育期、株高和叶片长宽等18个株形性状的关系。对株形性状与纹枯病病级进行了偏相关分析。实验结果,只有植株松紧度与病级表型偏相关两年中都达到了显著或极显著水平,倒2叶基角、穗层整齐度等8个性状与病级之间的偏相关只有一年达显著或极显著水平。结合构建的分子标记遗传连锁图谱,对各性状进行QTL定位。在抗纹枯病QTL相近区间仅检测到控制分蘖角、植株松紧度和倒2叶基角的QTLs,未发现其余株形性状QTLs与抗纹枯病QTLs分布在同一染色体上。结果表明,水稻对纹枯病的抗性主要是由本身抗性基因控制,株形对纹枯病抗性表达的影响主要是间接影响,即通过改变田间小气候而影响发病程度。抗纹枯病育种在累加主效抗纹枯病QTLs的同时,也要注重选择不利于纹枯病发展的株形性状。     

不同环境条件下粳型杂交稻米碾磨品质性状的遗传效应分析

采用包括基因型×环境互作效应的种子遗传模型,对粳型杂交稻稻米碾磨品质性状进行了遗传研究.结果表明:各碾磨品质性状除了受制于种子直接效应、细胞质效应和母体效应等遗传主效应外,还明显受到各基因型×环境互作效应的影响.其中糙米率性状以遗传主效应为主,而精米率、整精米率性状以基因型×环境互作效应为主.在遗传主效应中,糙米率性状主要受种子直接加性效应、母体加性效应的控制;在基因型×环境互作效应中,精米率和整精米率性状都是以种子直接加性×环境互作效应和母体加性×环境互作效应为主,细胞质×环境互作效应也起着较为重要的作用.大部分稻米碾磨品质性状的狭义遗传率均较高,其中糙米率性状以普通狭义遗传率为主,而精米率和整精米率性状则以互作狭义遗传率为主.另外,根据性状的遗传效应预测值对各亲本的育种利用价值作了评价.     

水稻株形对纹枯病抗性的影响

利用240份源于珍汕97B/明恢63的重组自交系水稻(Oryza sativa L.)群体,连续2年调查纹枯病病级与水稻生育期、株高和叶片长宽等18个株形性状的关系.对株形性状与纹枯病病级进行了偏相关分析.实验结果,只有植株松紧度与病级表型偏相关两年中都达到了显著或极显著水平,倒2叶基角、穗层整齐度等8个性状与病级之间的偏相关只有一年达显著或极显著水平.结合构建的分子标记遗传连锁图谱,对各性状进行QTL定位.在抗纹枯病QTL相近区间仅检测到控制分蘖角、植株松紧度和倒2叶基角的QTLS,未发现其余株形性状QTLs与抗纹枯病QTLs分布在同一染色体上.结果表明,水稻对纹枯病的抗性主要是由本身抗性基因控制,株形对纹枯病抗性表达的影响主要是间接影响,即通过改变田间小气候而影响发病程度.抗纹枯病育种在累加主效抗纹枯病QTLs的同时,也要注重选择不利于纹枯病发展的株形性状.     

甘蓝型油菜抗茎倒材料的筛选与候选基因挖掘

该研究采用茎秆抗折力指标评价了200份甘蓝型油菜种质资源抗茎倒伏能力,据此筛选出极端抗茎倒材料和不抗茎倒材料各1份,随后测定了2份材料成熟期茎秆的理化组分含量,并对2份极端抗茎倒差异材料蕾苔期、盛花期茎秆进行转录组测序分析,为甘蓝型油菜抗茎倒伏的遗传改良奠定基础。结果表明:(1)200份甘蓝型油菜种质资源的茎秆抗折力和茎粗均为正态分布,均属于数量遗传性状,并依据茎秆抗折力和农艺性状筛选出生育期相近,株型相似,茎秆粗度差异不显著,但茎秆抗折力差异显著的极端不抗茎倒材料GY172和抗茎倒材料GY199。(2)GY199的韧皮部比GY172更加致密,而GY172成熟期茎秆中的半纤维素、木质素、中性洗涤纤维及总可溶性糖含量均显著高于GY199,而其纤维素含量极显著低于GY199,即成熟期茎秆纤维素含量与这2个材料的茎秆抗折力呈正相关。(3)蕾苔期、盛花期茎秆转录组测序发现,碳代谢、碳固定、磷酸戊糖途径、氨基酸的生物合成、糖酵解/糖异生等途径的14个基因(BnaA10G0056100ZS、BnaC08G0455100ZS、BnaA08G0262400ZS、BnaC08G0239700ZS、BnaA07G0362300ZS、BnaC02G0081300ZS、BnaC04G0273000ZS等)以及纤维素合成相关的9个基因(BnaA05G0152200ZS、BnaA01G0411100ZS、BnaA03G0018900ZS、BnaA03G0037800ZS等)在抗茎倒材料GY199中显著上调表达,这些基因可能参与调控了茎秆强度性状,可作为油菜抗茎倒候选基因。     

楱属植物种间杂交花粉直感效应的考测与研究

本文通过对以大连栽培杂交榛为父本（P2）与饶河野生种平榛（Corylus heterophylla Fish)。杂交当代坚果（F0）,母本自然坚果（P1）进行考测与分析发现：（1）由大连引进的栽培杂交种花粉对杂交梁工坚果的开状、色泽、果皮厚度、果皮开裂性、种皮色泽、光滑度等质量性状均有明显的直接影响,即因花粉直效应产生的种子直感现象;（2）对坚果大小、单果重等数量性状也产生了一定花粉直感效应,这种数量性状种子直感遗传现象是在多年来植物杂交试验中较为罕见的。     

油菜矮秆相关基因定位克隆及其在育种中的应用

油菜是世界主要油料作物。倒伏问题是制约油菜机械化生产和产量提高的重要因素之一。矮秆油菜抗倒伏,有利于提高产量。因此,选育矮秆资源对油菜抗倒和高产育种具有重要意义。近年来,相关研究报道了多个具有育种价值的油菜矮秆材料,定位克隆了矮秆性状相关基因。本文就油菜矮秆相关基因定位克隆及其在育种中的应用研究进展进行综述,以期为发掘新的油菜矮秆基因以及油菜抗倒高产分子设计育种提供参考。     

籼粳杂交稻穗部性状的遗传效应及其与环境互作

采用包括基因型与环境互作效应的加性显性加性×加性上位性遗传模型,分析了不同环境下籼粳杂交稻穗部性状的遗传特点.结果表明,除了主穗粒数的加性与环境互作和二次枝梗数的显性与环境互作不显著外,其他性状均存在显著和极显著的加性、显性、加性×加性上位性遗传效应及其与环境的互作效应,其中均以显性效应为主,显性与环境互作效应对枝梗性状的影响较为明显.遗传率分析表明,各性状的普通广义遗传率最大,互作遗传率也有一定作用.杂种优势预测表明,除了一次、二次枝梗数外,其他性状均表现正向的杂种优势,基因型与环境互作只影响杂种优势表达的程度,而不改变其方向.遗传效应预测值结果表明,IR6615837、IR6560085、明恢63和R6694个亲本可以明显改良杂交后代多数穗部性状,且环境影响程度较小,可作为优良亲本列于育种计划中.     

综合性状及其分量的多元条件分析

提出基于混合线性模型的多元条件分析方法,用于分析复杂综合性状的分量对其目标性状的贡献。定义了贡献率和贡献遗传效应两个概念,贡献率测定给定分量性状的遗传变异对目标性状的贡献比率,贡献遗传效应衡量给定分量性状的遗传效应对目标性状的贡献值。运用所提出的新方法分析了棉花籽棉产量的3个分量对产量的贡献。     

小麦抗倒性研究进展

倒伏是严重影响小麦子粒产量和品质的一个重要因素。本文系统阐述了小麦茎秆形态和结构特性、茎秆化学成分与抗倒伏关系以及抗倒性的遗传和分子标记等方面的最新研究进展。株高、基部节间长度与抗倒性呈负相关;而基部节间粗度、秆壁厚、单位长度干重与抗倒性呈正相关。茎秆机械组织细胞层数、厚度,维管束数目、面积以及髓腔大小与抗倒性密切相关。茎秆化学成分中纤维素、木质素以及碳水化合物含量和硅、钾元素含量与抗倒性呈正相关。小麦抗倒性呈数量性状遗传特征,除受多对主基因控制外,可能还受微效修饰基因作用。采用分子标记技术已将抗倒性以及与抗倒性相关的茎秆形态性状进行了QTL定位。     

Quantitative trait loci for lodging resistance in a segregating wheat×spelt population

 Lodging can strongly affect both the grain yield and the quality of wheat. Lodging represents a quantitative trait and is difficult to assess on a phenotypic basis. Marker-assisted selection (MAS) could therefore become an important tool in breeding for lodging resistance. In this study, we mapped and characterised quantitative trait loci (QTLs) for lodging resistance, as well as morphological traits correlated with lodging, in a segregating population of 226 recombinant inbred lines derived from the cross of the lodging-resistant wheat variety Forno with the susceptible spelt variety Oberkulmer. Lodging, plant height, leaf width, leaf-growth habit, culm stiffness, culm swinging, culm thickness, days to ear emergence and days to flowering were assessed in field trials at two locations in 1996 and at one location in 1997. Additionally, at one location weight and length parameters were also assessed. Plant height and culm stiffness explained 77% of the phenotypic variance of lodging in a multiple regression model over all three environments. QTL analysis of lodging and morphological parameters was based on a genetic map containing 230 loci with 23 linkage groups (2469 cM). With the method of composite interval mapping nine QTLs for lodging resistance were detected, explaining 63% of the phenotypic variance in a simultaneous fit. Seven of these QTLs coincided with QTLs for morphological traits, reflecting the correlations between these traits and lodging. In our population the most efficient way to improve lodging resistance would be by a combination of indirect selection on plant height and culm stiffness together with MAS on the two QTLs for lodging resistance which did not coincide with QTLs for morphological traits. Received: 3 August 1998 / Accepted: 28 November 1998     

不同小麦品种茎秆特性及其与抗倒性的关系

以黄淮麦区优良品种矮抗58、周麦18、豫麦49、百农418为研究对象,采用田间试验与实验室分析相结合的方法,对不同小麦品种在不同生育时期的抗倒伏性状进行研究.结果表明: 茎秆机械强度在开花期至花后20 d处于较高水平,在花后30 d明显下降;倒伏指数在开花期最小,花后30 d最大,其余两个时期处于中间水平.相关分析表明,开花期机械强度与重心高度呈显著负相关,与纤维素、木质素含量呈显著正相关,倒伏指数与节长、株高、重心高度呈显著正相关,与纤维素、木质素含量呈显著负相关;花后10 d和花后20 d机械强度与节长、株高、重心高度呈显著负相关,与茎粗、纤维素、半纤维素、木质素含量呈显著正相关,倒伏指数这段时期正好与之相反;花后30 d机械强度与株高、重心高度呈显著负相关,倒伏指数与株高、重心高度呈显著正相关,与木质素含量呈显著负相关.因此,明确各个生育时期与抗倒性相关的茎秆特性,可为黄淮麦区高产抗倒性品种的选育提供依据.     

Isolation,expression, and evolution analysis of the type 2C protein phosphatase gene <Emphasis Type="Italic">BcABI1</Emphasis> involved in abiotic and biotic stress in <Emphasis Type="Italic">Brassica campestris</Emphasis> ssp. <Emphasis Type="Italic">chinensis</Emphasis>

Dense plant cultivation is an efficient approach to utilize the maximum inputs for increasing maize production. However, dense plant populations may prone to lodging as it results in increased plant height and reduced culm diameter; therefore, we hypothesized that weaker stems may be responsible for maize lodging. In this study, we examined the regulatory effects of paclobutrazol under two commonly used application methods (seed-soaking and seed-dressing). Seed-soaking with paclobutrazol at the rate of 0 (CK1), 200 (S1), 300 (S2), and 400 (S3) mg L^?1, while seed-dressing at the rate of 0 (CK2), 1.5 (D1), 2.5 (D2), and 3.5 (D3) g kg^?1 were used. Results showed that paclobutrazol improved the culm physical strength by increasing the rind penetration strength, stalk breaking strength, culm diameter, wall thickness, and dry weight per unit length of basal third internode, compared to control plants. Moreover, paclobutrazol reduced the internode length, plant height, ear height, center of gravity height and lodging rate in both growing seasons. In addition, more lignin was accumulated in the basal internode and the activities of phenylalanine ammonia-lyase (PAL), peroxidase (POD), cinnamyl alcohol dehydrogenase (CAD) and 4-coumarate: CoA ligase (4CL) increased with paclobutrazol, and their maximum values were observed in the S2 and D3 treatments, resulting in strong lodging resistance. Lignin content was positively and significantly correlated with the rind penetration strength, breaking strength of internode, and activities of PAL, 4CL, POD, and CAD, while significantly and negatively correlated with lodging percentage. The present findings suggested that 300 mg L^?1 and 3.5 g kg^?1 of paclobutrazol may efficiently be utilized to minimize the risk of lodging, not only by manipulating plant height but also by enhancing culm physical strength and lignin accumulation in basal internodes.     

Characterising the morphological characters and carbohydrate metabolism of oat culms and their association with lodging resistance

• Lodging resistance can be improved by enhancing the mechanical strength of culms, and culm carbohydrates could improve this mechanical strength. Culm carbohydrates can regulate development of the culm and affect its toughness.
• The present study determines the relationship between lodging and carbohydrate content in oat culms. Field experiments were conducted in alpine regions in 2017 and 2018 using three oat varieties with different lodging resistance. Lodging‐related morphological characteristics were directly determined and culm carbohydrate content and enzyme activity related to cellulose synthesis and sucrose metabolism were evaluated with ultraviolet spectrophotometry.
• Results showed that the lower the gravity height or the lower ratio of gravity height to plant height, the stronger the lodging resistance of the varieties. Higher culm nonstructural (NSC) and structural (SC) carbohydrate content contributed to the ability of culms to resist lodging, especially the content of cellulose and sucrose. PCA showed that sucrose metabolism and SC content were closely related to lodging resistance. Correlation analysis showed that the lodging index (LI) was significantly negatively correlated with NSC. Sucrose content was highly and significantly positively correlated with NSC. Additionally, the activities of sucrose phosphate synthase (SPS) and sucrose synthase (SS) were highly and significantly positively correlated with sucrose and cellulose content.
• The relationship between field characters and oat lodging, as well as the regulatory mechanism of carbohydrate content on lodging resistance of the culm are discussed.

     

QTL analysis of lodging resistance and related traits in Italian ryegrass (<Emphasis Type="Italic">Lolium multiflorum</Emphasis> Lam.)

Italian ryegrass (Lolium multiflorum Lam.) is the most widely cultivated annual forage grass in Japan. Lodging damage reduces both harvested yield and forage quality. To identify the chromosomal regions controlling lodging resistance in Italian ryegrass, we analyzed seven quantitative characters—heading date, plant height, culm weight, culm diameter, culm strength, tiller number, and culm pushing resistance—and evaluated lodging scores in the field in a two-way pseudo-testcross F₁ population. Significant correlations between most combinations of the traits examined were found. Seventeen QTLs for all traits except culm weight were detected on six of seven linkage groups by simple interval mapping using cross-pollination (CP) algorithm, and 33 independent QTLs were also detected by composite interval mapping from both male and female parental linkage maps. In addition, up to 18 QTLs for lodging scores evaluated at nine different times were detected on all linkage groups. The flanking markers of those QTLs will serve as a useful tool for marker-assisted selection of lodging resistance in Italian ryegrass.     

Genetic parameters estimation for some wild wheat species and their F1 hybrids grown in different regions of Saudi Arabia

Wheat (Triticum aestivum L.) is the most important crop for human nutrition that underpins the food safety of Saudi Arabia. The investigation here was to determine heterosis effects using different genetic methods: heterosis over better, mid parents, the genetic advance, and genotype, phenotypic coefficient of variation for estimation some traits among six wheat landraces and their F₁ hybrids. In 2019, these landraces were sown using hand and after 100 days, the emasculation and crossing were made among these six landraces using hand emasculation of anthers. In 2020, seeds for these genotypes (six wheat landraces and their F₁) were sown under normal irrigation accordingly done in 2019. The results showed that the most important parent was Mabia resulted with the highest value in number of tiller/ plant, 1,000-grain weight, and fresh shoot weight. The highest value of plant height among six parents was Naqra while highest value at the same trait among F₁ hybrids was P₃ XP₆. The estimations of heterosis showed that out of 15 crosses, one cross (P₁XP₅) was significantly better yield than all crosses for these four traits. The genotype coefficient of variation (GCV) ranged from 12.5% to 8.7% while phenotypic coefficient of variation ranged from 17.7% to 11.3%. The correlation coefficients was found between fresh shoot weight and number of tiller and plant height and umber of tiller. Wild wheat still serve as a source of useful germplasm with proven adaption and productivity and thus assembles of the wild wheat assortments are the initial step of breeding program.     

水稻基部伸长节间性状与茎秆机械强度的相关分析和QTL定位

分析水稻品种‘沈农265’和‘丽江新团黑谷’杂交的F2群体基部第二节间茎秆机械强度与该节间形态和茎秆解剖结构的相关性,并对基部第二节间机械强度和相关性状进行QTL定位的结果表明：机械强度与茎粗、茎壁面积、茎壁厚度、大小维管束数目、大小维管束面积、大小维管束韧皮部面积、大小维管束木质部面积呈显著或极显著的正相关,与节间长度呈极显著的负相关,而与茎秆扁平率的相关不显著。采用复合区间作图,从研究的14个目标性状中检测到18个QTL。控制基部第二节间的抗折力的QTL检测到4个,位于第4、7、9和10号染色体上,可解释遗传变异的12%～23%。在第4和第7染色体上的相同区间上还同时检测到了控制茎壁性状和维管束性状QTL,贡献率在12%～21%之间。说明这两个位点是控制基部第二节间机械强度的重要区域,也是茎壁性状、维管束性状与机械强度高度正相关的遗传学基础。     

Genetic Components of Heterosis for Seedling Traits in an Elite Rice Hybrid Analyzed Using an Immortalized F_2 Population

Utilization of heterosis has greatly contributed to rice productivity in China and many Asian countries. Superior hybrids usually show heterosis at two stages: canopy development at vegetative stage and panicle development at reproductive stage resulting in heterosis in yield. Although the genetic basis of heterosis in rice has been extensively investigated, all the previous studies focused on yield traits at maturity stage. In this study, we analyzed the genetic basis of heterosis at seedling stage making use of an "immortalized F2" population composed of 105 hybrids produced by intercrossing recombinant inbred lines(RILs) from a cross between Zhenshan 97 and Minghui 63,the parents of Shanyou 63, which is an elite hybrid widely grown in China. Eight seedling traits, seedling height, tiller number, leaf number, root number, maximum root length, root dry weight, shoot dry weight and total dry weight, were investigated using hydroponic culture. We analyzed single-locus and digenic genetic effects at the whole genome level using an ultrahigh-density SNP bin map obtained by population re-sequencing. The analysis revealed large numbers of heterotic effects for seedling traits including dominance, overdominance and digenic dominance(epistasis) in both positive and negative directions. Overdominance effects were prevalent for all the traits, and digenic dominance effects also accounted for a large portion of the genetic effects. The results suggested that cumulative small advantages of the single-locus effects and two-locus interactions, most of which could not be detected statistically, could explain the genetic basis of seedling heterosis of the F_1 hybrid.