In vivo biostability of four types of arterial grafts with impervious walls; their haemodynamic and pathological characteristics

We describe the haemodynamic and pathological characteristics of four types of impervious arterial prostheses, two alloplastic (Milrathane^® and Gore-Tex^®), and two chemically processed bovine heterografts (Solcograft^® and Solco P^®). They were implanted in the thoracic aortae of dogs for durations of 24 hours, 48 hours, one weeks, two weeks, one month, three months and six months. Haemodynamic analyses showed no relation between the shear rate index, I·_Y, and compliance, C_D. The observed shear rates are 6.5 times lower than those likely to damage the endothelial cell layer. Macroscopic and microscopic observations of explanted grafts showed the presence of obstructive thrombi at the anastomoses of Mitrathane^® grafts as early as one week. Gore-Tex^® grafts develop in the area of anastomoses parietal-thrombi which reorganize and become covered with pseudo-endothelial cells. The bovine heterografts show a similar behaviour. However, whereas Solcograft^® has an irregular thin wall, Solco P^® had improved characteristics except in the graft implanted for three months which demonstrated some manufacturing weaknesses. Both types showed the development of anastomotic pannus covered with endothelial-like cells. All grafts, whether alloplastic or chemically processed, suffered from an absence of healing of the middle part of the prosthesis. The cause of this problem will be found in the analysis of the biochemical and enzymatic reactations between the material used and its physiological surrounding.     

Applying elastic fibre biology in vascular tissue engineering

For the treatment of vascular disease, the major cause of death in Western society, there is an urgent need for tissue-engineered, biocompatible, small calibre artery substitutes that restore biological function. Vascular tissue engineering of such grafts involves the development of compliant synthetic or biomaterial scaffolds that incorporate vascular cells and extracellular matrix. Elastic fibres are major structural elements of arterial walls that can enhance vascular graft design and patency. In blood vessels, they endow vessels with the critical property of elastic recoil. They also influence vascular cell behaviour through direct interactions and by regulating growth factor activation. This review addresses physiological elastic fibre assembly and contributions to vessel structure and function, and how elastic fibre biology is now being exploited in small diameter vascular graft design.     

Development of Small Diameter Nanofiber Tissue Engineered Arterial Grafts

The surgical repair of heart and vascular disease often requires implanting synthetic grafts. While synthetic grafts have been successfully used for medium-to-large sized arteries, applications for small diameter arteries (<6 mm) is limited due to high rates of occlusion by thrombosis. Our objective was to develop a tissue engineered vascular graft (TEVG) for small diameter arteries. TEVGs composed of polylactic acid nanofibers with inner luminal diameter between 0.5 and 0.6 mm were surgically implanted as infra-renal aortic interposition conduits in 25 female C17SCID/bg mice. Twelve mice were given sham operations. Survival of mice with TEVG grafts was 91.6% at 12 months post-implantation (sham group: 83.3%). No instances of graft stenosis or aneurysmal dilatation were observed over 12 months post-implantation, assessed by Doppler ultrasound and microCT. Histologic analysis of explanted TEVG grafts showed presence of CD31-positive endothelial monolayer and F4/80-positive macrophages after 4, 8, and 12 months in vivo. Cells positive for α-smooth muscle actin were observed within TEVG, demonstrating presence of smooth muscle cells (SMCs). Neo-extracellular matrix consisting mostly of collagen types I and III were observed at 12 months post-implantation. PCR analysis supports histological observations. TEVG group showed significant increases in expressions of SMC marker, collagen-I and III, matrix metalloproteinases-2 and 9, and itgam (a macrophage marker), when compared to sham group. Overall, patency rates were excellent at 12 months after implantation, as structural integrity of these TEVG. Tissue analysis also demonstrated vessel remodeling by autologous cell.     

MACROSCOPIC, MICROSCOPIC, AND MECHANICAL ANALYSES OF PROTOTYPE DOUBLE VELOUR VASCULAR GRAFTS

In-vivo and ex-vivo evaluations of two prototype double velour tube grafts have been conducted. The experimental grafts were fabricated from terry cloth derivatives of the Dacron polyester material that is used in the construction of presently available Microvel(R) Double Velour and Cooley Double Velour Guideline(R) grafts.(*) The use of terry cloth derivatives in the experimental grafts provides a velour pile that is more uniform in height and density than current clinical grafts. The hypothesis examined by these studies was whether the utilization of terry cloth derivatives provides a more perfect capsular and luminal surface for fibrous tissue attachment and ingrowth, thereby enhancing neointimal formation at the blood contacting surface. Using standard techniques, prototype grafts were implanted in the abdominal aortas of dogs for test periods of 1 to 6 months. All grafts remained patent throughout the healing period. At explantation, the macroscopic and microscopic properties of the grafts were examined and characterized. Neointimal analysis demonstrated that the lighter denier, higher porosity prototype consistently produced more homogeneous blood-contacting surfaces with smoother contours and more complete endothelialization than the heavier denier, lower porosity prototype. From these analyses, we can conclude that both prototype grafts possess the basic properties of useful arterial prostheses. They are not prone to early thrombosis, and exhibit rapid healing properties. This study indicates that the use of terry cloth derivatives provides a more uniform, less random velour pile and that arterial grafts constructed from such materials produce more uniform and biologically stable neointimas.     

Functional properties of fresh and cryopreserved carotid and femoral arteries,and of venous and synthetic grafts: comparison with arteries from normotensive and hypertensive patients

The ideal arterial graft must share identical functional properties with the host artery. Surgical reconstruction of the common carotid artery (CA) is performed in several clinical situations, using expanded polytetrafluoroethylene prosthesis (ePTFE) or saphenous vein (SV) grafts. At date there is interest in obtaining an arterial graft that improves the results of that nowadays available. The use of a fresh or cryopreserved/defrosted artery appears as an interesting alternative. However, if the fresh and cryopreserved/defrosted arteries allow an adequate viscoelastic and functional matching with the host arteries needs to be established. The aims were to compare the viscoelastic and functional performance of: (1) conduits used in CA reconstruction (SV and ePTFE) with those of the fresh and cryopreserved/defrosted CA and femoral arteries (FA), and (2) normotensive and hypertensive patients’ arteries with those of the arterial substitutes in vitro analyzed. Pressure, diameter and wall thickness of the CA were recorded in 15 normotensive and 15 hypertensive patients (in vivo studies), and in SV, fresh and cryopreserved/defrosted CA and FA (obtained from 15 donors), and ePTFE segments (in vitro studies). From stress–strain relationship we calculated elastic and viscous modulus, and the characteristic impedance. The local buffer and conduit functions were quantified as the viscous/elastic quotient and the inverse of the characteristic impedance. Fresh and cryopreserved/defrosted CA and FA were more alike, both in viscoelastic and functional levels, respect to normotensive and hypertensive patients’ arteries, than the ePTFE and SV grafts. CA and FA cryografts could be considered an important alternative for carotid reconstruction.     

A nanofibrous PHBV tube with Schwann cell as artificial nerve graft contributing to Rat sciatic nerve regeneration across a 30-mm defect bridge

Abstract

A nanofibrous PHBV nerve conduit has been used to evaluate its efficiency based on the promotion of nerve regeneration in rats. The designed conduits were investigated by physical, mechanical and microscopic analyses. The conduits were implanted into a 30-mm gap in the sciatic nerves of the rats. Four months after surgery, the regenerated nerves were evaluated by macroscopic assessments and histology. This polymeric conduit had sufficiently high mechanical properties to serve as a nerve guide. The results demonstrated that in the nanofibrous graft with cells, the sciatic nerve trunk had been reconstructed with restoration of nerve continuity and formatted nerve fibers with myelination. For the grafts especially the nanofibrous conduits with cells, muscle cells of gastrocnemius on the operated side were uniform in their size and structures. This study proves the feasibility of artificial conduit with Schwann cells for nerve regeneration by bridging a longer defect in a rat model.     

The elastic properties of a polyurethane arterial prosthesis

The relationship between the mechanical properties of a fibrous polyurethane arterial prosthesis and the graft manufacturing process variables was studied from uniaxial tensile tests. A non-linear model was used to characterize the cylindrical elastic properties. Experiments on cylindrical segments were carried out to determine the constitutive constants and to assess the applicability of the model to the polyurethane graft. The compliance of 4 mm internal diameter grafts with various wall-thicknesses was predicted. The results were used to produce grafts with compliance matched to that of the carotid and femoral arteries.     

Computational model of blood flow in the aorto-coronary bypass graft

Background

Coronary artery bypass grafting surgery is an effective treatment modality for patients with severe coronary artery disease. The conduits used during the surgery include both the arterial and venous conduits. Long- term graft patency rate for the internal mammary arterial graft is superior, but the same is not true for the saphenous vein grafts. At 10 years, more than 50% of the vein grafts would have occluded and many of them are diseased. Why do the saphenous vein grafts fail the test of time? Many causes have been proposed for saphenous graft failure. Some are non-modifiable and the rest are modifiable. Non-modifiable causes include different histological structure of the vein compared to artery, size disparity between coronary artery and saphenous vein. However, researches are more interested in the modifiable causes, such as graft flow dynamics and wall shear stress distribution at the anastomotic sites. Formation of intimal hyperplasia at the anastomotic junction has been implicated as the root cause of long- term graft failure.Many researchers have analyzed the complex flow patterns in the distal sapheno-coronary anastomotic region, using various simulated model in an attempt to explain the site of preferential intimal hyperplasia based on the flow disturbances and differential wall stress distribution. In this paper, the geometrical bypass models (aorto-left coronary bypass graft model and aorto-right coronary bypass graft model) are based on real-life situations. In our models, the dimensions of the aorta, saphenous vein and the coronary artery simulate the actual dimensions at surgery. Both the proximal and distal anastomoses are considered at the same time, and we also take into the consideration the cross-sectional shape change of the venous conduit from circular to elliptical. Contrary to previous works, we have carried out computational fluid dynamics (CFD) study in the entire aorta-graft-perfused artery domain. The results reported here focus on (i) the complex flow patterns both at the proximal and distal anastomotic sites, and (ii) the wall shear stress distribution, which is an important factor that contributes to graft patency.

Methods

The three-dimensional coronary bypass models of the aorto-right coronary bypass and the aorto-left coronary bypass systems are constructed using computational fluid-dynamics software (Fluent 6.0.1). To have a better understanding of the flow dynamics at specific time instants of the cardiac cycle, quasi-steady flow simulations are performed, using a finite-volume approach. The data input to the models are the physiological measurements of flow-rates at (i) the aortic entrance, (ii) the ascending aorta, (iii) the left coronary artery, and (iv) the right coronary artery.

Results

The flow field and the wall shear stress are calculated throughout the cycle, but reported in this paper at two different instants of the cardiac cycle, one at the onset of ejection and the other during mid-diastole for both the right and left aorto-coronary bypass graft models. Plots of velocity-vector and the wall shear stress distributions are displayed in the aorto-graft-coronary arterial flow-field domain. We have shown (i) how the blocked coronary artery is being perfused in systole and diastole, (ii) the flow patterns at the two anastomotic junctions, proximal and distal anastomotic sites, and (iii) the shear stress distributions and their associations with arterial disease.

Conclusion

The computed results have revealed that (i) maximum perfusion of the occluded artery occurs during mid-diastole, and (ii) the maximum wall shear-stress variation is observed around the distal anastomotic region. These results can enable the clinicians to have a better understanding of vein graft disease, and hopefully we can offer a solution to alleviate or delay the occurrence of vein graft disease.

     

Differential Extraction of N-Acetylglucosaminidase and Trehalase from the Cell Envelope of Candida albicans

Molloy, C., Shepherd, M. G., and Sullivan, P. A. 1995. Differential extraction of N-acetylglucosaminidase and trehalase from the cell envelope of Candida albicans. Experimental Mycology 19, 178-185. Dithiothreitol (DTT) extraction of N-acetylglucosaminidase and trehalase from intact Candida albicans ATCC 10261 cells was monitored as an index of cell envelope porosity during N-acetylglucosamine-induced morphogenesis. Trehalase, which is secreted into the cell envelope during starvation and bud-formation, displayed similar extraction kinetics in starved, germ tube-forming, and bud-forming cells, indicating that the mother cell wall remains largely unchanged during morphogenic outgrowth and that the porosity of bud and mother cell walls is similar. N-acetylglucosaminidase, which is secreted specifically during morphogenesis, was released eightfold more rapidly from germ tube-forming than bud-forming cells, reflecting major differences in porosity between bud and germ tube. In addition, by assaying DTT extracts and extracted cell residues, it was found that the total extracellular N -acetylglucosaminidase activity increased 2- to 2.5-fold during DTT treatment. Thus, DTT unmasks a cryptic form of N-acetylglucosaminidase. The cryptic activity was associated with the cell wall fraction.     

Development of a bioartificial nerve graft. II. Nerve regeneration in vitro

A promising alternative for the repair of peripheral nerve injuries is the bioartificial nerve graft, or BNG, comprised of a tubular conduit preseeded with Schwann cells, which are an effective substrate for enhancing nerve regeneration. The physical properties of the conduit, porosity and wall thickness, as well as the Schwann cell seeding density, were tested for their effect on axon growth using rat dorsal root ganglia. These parameters can influence the amount of nutrients and growth factors made available to the neural tissue. Results show that a greater wall thickness and lower porosities have a detrimental effect on the growth of the axons. Over a four week period, axons extended 3.2 mm for the optimum case (DeltaR = 0.82 mm, epsilon = 0.75) compared to 1.8 and 1.6 mm for a lower porosity (0.55) and a greater wall thickness (1.4 mm), respectively. A maximum in the growth rate occurs at a porosity of 75% for Schwann cell seeded conduits but not for unseeded ones. When compared to mass transfer predictions, the results suggest that, at higher porosities, more growth factors diffuse out of the conduit, while at low porosities there is competition for nutrients. Increasing the Schwann cell seeding density enhances growth but also leads to an increase in the number of axons along the length of the conduit. This is indicative of branching of the axons, which requires additional resources to maintain and can lead to painful neuroma formation. Wall thickness and porosity were found not to have any significant effect on the axon number sprouting from the dorsal root ganglia and the mean diameter (p > 0.05). Considerations need to be made, not just on the polymer used, but also on its porosity, wall thickness, and Schwann cell seeding density. These parameters can be adjusted to create a bioartificial nerve graft that provides the optimal environment for nerve growth.     

Combined computational study of mechanical behaviour and drug delivery from a porous, hydroxyapatite-based bone graft

This paper presents a numerical model of a porous, hydroxyapatite-based bone graft also suitable as a drug delivery device. The graft was positioned in different sites and with different porosities inside a human femur model. The structural analyses were carried out to verify the graft mechanical strength, using the Tsai–Wu criterion, and the maximum porosity at which static failure does not occur. A local stress shielding risk was also calculated as the ratio between the bone stress in the intact condition and the stress after implantation of the graft. Drug release kinetics was calculated by means of the finite element method. High porosity grafts were found to fail in all implantation sites. Lower porosity grafts showed to have adequate strength if implanted in some positions, while provided insufficient resistance for other implantation sites. Drug release kinetics was found to be strongly dependent both on the porosity of the graft and the bone density near the bone-graft interface.     

Tectonic epikeratoplasty with ethanol-stored donor corneas

To evaluate the efficacy and outcomes of tectonic epikeratoplasty with use of ethanol-preserved corneal grafts for the management of perforated corneal melts. The present retrospective case series includes 10 eyes which underwent tectonic epikeratoplasty for perforated corneal melts. The stromal remainders of Descemet membrane endothelial keratoplasty (DMEK) and Descemet stripping automated endothelial keratoplasty (DSAEK) graft preparation were stored in 95% ethanol and used as emergency tectonic grafts for restoring globe integrity after sterile and infectious perforated corneal melts. In 6 cases with subtotal corneal melt, DMEK remainders (endothelium-denuded corneoscleral buttons) were used for ‘limbus to limbus’ tectonic epikeratoplasty and in 4 cases DSAEK remainders (anterior stroma) were used to seal focal perforated melts. Graft storage time was 5.1?±?4.9 (ranging from 0.5 to 17) months. The surgeries were successful in all cases with restitution of the globe integrity. During the postoperative course 4 cases developed a graft melt (corneoscleral button for limbus to limbus tectonic epikeratoplasty, n?=?3; lamellar patch, n?=?1) within 2–6 months after the initial procedure. Three patients underwent successful repeat tectonic epikeratoplasty. In the fourth case of graft melt the globe was enucleated due to underlying expulsive haemorrhage and severe pain. The short-term results of the present case series suggest that the use of ethanol-stored stromal remainder of donor corneas after endothelial keratoplasty is an efficient temporary measure for tectonic restoration of perforated corneas.     

Effect of isolation of periosteum and dura on the healing of rabbit calvarial inlay bone grafts

Little is understood about the role of the recipient site in the revascularization and incorporation of autogenous inlay bone grafts in the craniofacial skeleton. Clinical experience demonstrates that secondary complex cranial vault reconstruction performed with scarred avascular dura or poor soft-tissue coverage may undergo significant resorption, thus compromising the aesthetic outcome. This study was designed to determine the effect of isolating autogenous orthotopic inlay calvarial bone grafts from the surrounding dura and/or periosteum on graft revascularization, healing, and volume maintenance in the adult rabbit. Adult rabbits were randomized into four groups (n = 10 per group); in each rabbit, the authors created a circular, 15-mm in diameter, full-thickness cranial defect followed by reconstruction with an autogenous calvarial bone graft, which was replaced orthotopically and held with microplate fixation. Silicone sheeting (0.5 mm thickness) was used to isolate the dura (group II), the periosteum (group II), or both dura and periosteum (group IV) from the graft interface. No silicone was placed in group I. Animals were killed 10 weeks postoperatively, and calvaria were harvested to assess graft surface area, morphology, quantitative histology, fluorochrome staining, and revascularization. Grafts isolated from both the dura and periosteum exhibited significant decreases in total bone (cortical and trabecular) surface area, blood vessel count, and interface healing compared with nonisolated control grafts. Isolation of either the dura or periosteum significantly (p < 0.05) decreased blood vessel count but had no significant effect on interface healing. Isolation of the dura alone was associated with a significant (p < 0.05) decrease in graft cross-sectional surface area and dural cortical thickness compared with nonisolated control grafts, but this effect was not observed when the periosteum alone was isolated. Quantitative histology performed 10 weeks after surgery indicated that graft isolation was associated with increased marrow fibrosis and necrosis compared with nonisolated controls; it also demonstrated evidence of increased activity in bone remodeling (osteoblast and osteocyte count, new trabecular bone, and surface resorption). Triple fluorochrome staining suggested increased bone turnover in the nonisolated grafts compared with isolated grafts at 1 and 5 weeks postoperatively. This study demonstrates that isolating a rabbit calvarial inlay autogenous bone graft from the dura and/or periosteum results in significantly (p < 0.05) decreased revascularization, interface healing, and cross-sectional areas of amount of mature bone compared with nonisolated control grafts 10 weeks after surgery. At this time point, histologic examination demonstrates a paradoxical increase in bone remodeling in isolated bone grafts compared with controls. It is possible that the inhibition of revascularization results in a delayed onset of the remodeling phase of graft incorporation. However, in the model studied, it is not known whether the quantitative histologic and morphometric parameters measured in these isolated grafts exhibit a "catch-up" phenomenon at time points beyond 10 weeks after surgery. The results of this study emphasize the importance of a healthy recipient site in the healing and incorporation of calvarial bone grafts but stress the need for further investigation at later time points.     

The accelerated atherogenesis of venous grafts might be attributed to aggravated concentration polarization of low density lipoproteins: A numerical study

We hypothesize that after implantation the much elevated water filtration rate of venous grafts may cause aggravated concentration polarization of low density lipoproteins (LDLs), in turn lead to the accelerated atherogenesis of the grafts. To verify the hypothesis, we numerically simulated the transport of LDLs in various models of arterial bypasses with different grafts (veins or arteries) and geometrical configurations. The results showed that the venous grafts might endure abnormally high lipid infiltration/accumulation within the vessel wall due to severely elevated luminal surface LDL concentration. When compared to the conventional bypass models, the S-type bypass had the lowest luminal surface LDL concentration along its host artery floor, but the highest degree of risk to develop atherosclerotic lesions in its venous graft. Among the three conventional bypass models, the one with 30° anastomosis had the lowest risk to develop atherosclerosis in the venous graft. In conclusion, when compared with the bypass models with arterial grafts, the venous bypass models had rather high levels of LDL concentration polarization (c_w) in the vein grafts, especially at the early stages of implantation. This might result in high infiltration/accumulation of LDLs within the walls of the venous grafts, leading to a fast genesis/development of atherosclerosis there.     

Comparative Secretome Analysis of Magnaporthe oryzae Identified Proteins Involved in Virulence and Cell Wall Integrity

Plant fungal pathogens secrete numerous proteins into the apoplast at the plant–fungus contact sites to facilitate colonization. However, only a few secretory proteins were functionally characterized in Magnaporthe oryzae, the fungal pathogen causing rice blast disease worldwide. Asparagine-linked glycosylation 3 (Alg3) is an α-1,3-mannosyltransferase functioning in the N-glycan synthesis of N-glycosylated secretory proteins. Fungal pathogenicity and cell wall integrity are impaired in Δalg3 mutants, but the secreted proteins affected in Δalg3 mutants are largely unknown. In this study, we compared the secretomes of the wild-type strain and the Δalg3 mutant and identified 51 proteins that require Alg3 for proper secretion. These proteins were predicted to be involved in metabolic processes, interspecies interactions, cell wall organization, and response to chemicals. Nine proteins were selected for further validation. We found that these proteins were localized at the apoplastic region surrounding the fungal infection hyphae. Moreover, the N-glycosylation of these proteins was significantly changed in the Δalg3 mutant, leading to the decreased protein secretion and abnormal protein localization. Furthermore, we tested the biological functions of two genes, INV1 (encoding invertase 1, a secreted invertase) and AMCase (encoding acid mammalian chinitase, a secreted chitinase). The fungal virulence was significantly reduced, and the cell wall integrity was altered in the Δinv1 and Δamcase mutant strains. Moreover, the N-glycosylation was essential for the function and secretion of AMCase. Taken together, our study provides new insight into the role of N-glycosylated secretory proteins in fungal virulence and cell wall integrity.     

Elastic chitosan conduits with multiple channels and well defined microstructure

Four kinds of chitosan conduits with longitudinal multi-channels and controlled internal microstructures were prepared using a special mold and a freeze-drying method. One of the conduits was fabricated from a chitosan solution (ab NC), while the other three groups were made from a pre-gelled chitosan solution using genipin as a chemical cross-linker (ab gNC), dibasic sodium phosphate as a physical cross-linker (ab pNC) or a combined ionic and covalent co-cross-linker (ab gpNC), respectively. The porosity of the chitosan conduits ranged from 88 to 90%. The gpNC showed highly interconnected and uniformly distributed pores compared to NC, the gNC and pNC. In contrast, the gNC and gpNC showed about 10% of the volume swelling ratio in 37°C PBS solution, although the gpNC scaffold's water uptake was the highest, at more than 17 times its original mass. Compressive tests showed that gpNC had significant elasticity and maintained its physical integrity even after compressing them down to 20% of their original height. The elastic modulus of gpNC reached 80 kPa, which was more than twice that of the other groups. Adhesion and proliferation of PC12 cells on chitosan gpNC scaffolds showed excellent properties by MTT and SEM observation, which indicated the potential of gpNC scaffolds for nerve tissue engineering applications.     

Pre-grafting histological studies of skin grafts cryopreserved in α helix antarctic yeast oriented antifreeze peptide (Afp1m)

A number of living creatures in the Antarctic region have developed characteristic adaptation of cold weather by producing antifreeze proteins (AFP). Antifreeze peptide (Afp1m) fragment have been designed in the sequence of strings from native proteins. The objectives of this study were to assess the properties of Afp1m to cryopreserve skin graft at the temperature of −10 °C and −20 °C and to assess sub-zero injuries in Afp1m cryopreserved skin graft using light microscopic techniques. In the present study, a process was developed to cryopreserve Sprague-Dawley (SD) rat skin grafts with antifreeze peptide, Afp1m, α-helix peptide fragment derived from Glaciozyma antractica yeast. Its viability assessed by different microscopic techniques. This study also described the damages caused by subzero temperatures (−10 and −20 °C) on tissue cryopreserved in different concentrations of Afp1m (0.5, 1, 2, 5 and 10 mg/mL) for 72 h. Histological scores of epidermis, dermis and hypodermis of cryopreserved skin grafts showed highly significant difference (p < 0.01) among the different concentrations at −10 and −20 °C. In conclusion, the integrity of cryopreserved skin grafts with lower concentrations of Afp1m (0.5, 1 and 2 mg/mL) or at −20 °C was not maintained. The present study attested that Afp1m is a good cryoprotective agent for the cryopreservation of skin graft. Higher Afp1m concentrations (5 and 10 mg/mL) at −10 °C found to be suitable for the future in vivo study using (SD) rat skin grafts.     

The Preparation and Performance of a New Polyurethane Vascular Prosthesis

We investigated the performance of small-caliber polyurethane (PU) small-diameter vascular prosthesis generated using the electrospinning technique. PU was electrospun into small-diameter, small-caliber tubular scaffolds for potential application as vascular grafts. We investigated the effects of electrospinning conditions (solution concentration, mandrel rotation speed) on the microstructure and porosity of the scaffolds for the purpose of preparing scaffolds with optimum microstructures and properties. We evaluated the mechanical properties of the scaffolds by tensile tests and the cytotoxicity of the PU small-diameter, small-caliber PU synthetic vascular graft by the MTT assay. The adhesion of endothelial cells to the PU scaffold was characterized by Hoechst staining and fluorescence microscopy, and we measured endothelial cell proliferation on the PU scaffold by the CCK-8 assay. We analyzed the prosthesis microstructure and endothelial cell morphology using scanning electron microscopy. With increasing PU concentration in the electrospinning solution, the fiber diameter of the vascular graft increased and the porosity decreased. In addition, with increasing electrospinning time, the wall thickness increased and the porosity decreased. We found that regular fiber orientation can be obtained by adjusting the rotation speed of the mandrel. Cell proliferation was not inhibited as the small-caliber PU synthetic vascular grafts showed little cytotoxicity. The endothelial cells had faster adherence to the PU scaffolds than to the PTFE surface during the initial contact. After prolonged cell culture, significantly higher endothelial cell proliferation rate was observed in the PU scaffold groups than the PTFE group. We obtained small-caliber PU vascular grafts with optimal fiber arrangement, excellent mechanical properties, and optimal biocompatibility by optimizing the electrospinning conditions. This study provides in vitro biocompatibility data that is helpful for the clinical application of the PU small-diameter, small-caliber PU vascular grafts.     

Mechanical remodeling of small-intestine submucosa small-diameter vascular grafts--a preliminary report

Small-intestine submucosa (SIS) is cell-free, 100-mu-thick collagen derived from the small intestine. It has been used as a vascular graft and has the highly desirable ability to be remodeled to become histologically indistinguishable from native adjacent artery. To date there has been limited reporting of its preimplantation and explant mechanical properties as a vascular graft. In this study, compliance, elastic modulus, and burst pressure were measured on preimplant-tested 5- and 8-mm SIS grafts and two 60-day remodeled grafts. Seven prefabricated grafts were implanted in the carotid (n = 7) in dogs, which were sacrificed after 55-63 days. The animals (n = 4) weighed from 22 to 27 kg. One dog received a unilateral carotid graft, and 3 dogs received bilateral carotid grafts. The fabrication technique employed hand-suturing with either nonresorbable or resorbable sutures. None of the grafts had a patency failure. Angiograms taken at 1 month and just before explantation showed uniform flow and no dilation. At the time of explantation, all carotid grafts were found to be encased in fibrous tissue. The grafts made with nonresorbable sutures showed thicker tissue growth at the suture line compared with those made with the resorbable sutures. Along the suture line, the grafts made with resorbable sutures exhibited a more natural color than those sutured with nonresorbable sutures. When the explanted carotid grafts were slit open, the lumen was white, shiny, and glistening. The grafts sutured with nonresorbable sutures exhibited small areas of fibrin and red blood cells when the suture was within the lumen. The resorbable-sutured grafts did not exhibit this response. The mean compliance (percent diameter increase for a pressure rise from 80 to 120 mm Hg) was on average 4.6% (range, 2.9%-8.6%) for the 5-mm preimplant-tested grafts. For the 8-mm preimplant-tested grafts, the increase in diameter for the same pressure rise was 8.7%, on average (range, 7.2% to 9.5%). For comparison, the small-diameter SIS graft at the time of implantation was about one half as compliant as the adjacent dog carotid artery, about 4 times more compliant than a typical vein graft, and more than 10 times more compliant than synthetic vascular grafts. The compliance measured on two 60-day carotid grafts was 10.5% and 7.2%, respectively. This is midway between the original compliance value and the compliance of a typical canine carotid artery (14%), indicating that mechanical remodeling occurred. The modulus of elasticity (E) increased exponentially with increasing pressure according to E = E0e alpha P, where E0 is the zero-pressure modulus and alpha is the exponent that describes the rate of increase in E with pressure; the unit of measure for variables E, E0, and P is g/cm2. The mean value for E0 was 4106 gm/cm2 (range, 1348-5601). The mean value for alpha was 0.0059 (range, 0.0028-0.0125). At 100 mm Hg, the mean value for E was 8.03 x 10(6) dynes/cm2 (range, 4.95-15.7 x 10(6)). For a 60-day SIS graft implant, the elastic modulus at 100 mm Hg decreased from a high value at implant time to twice that of a typical native canine carotid artery. The mean burst pressure for 5.5-mm grafts was 3517 mm Hg (range, 2069-4654). The burst pressure of the remodeled carotid grafts averaged 5660 mm Hg. The burst pressure for a typical carotid artery is about 5000 mm Hg. The results of this preliminary study complement those of previous SIS-vascular-graft studies and add a new factor, namely that the mechanical properties of the remodeled graft approach those of the vessel it replaces.     

The impact of transportation time on apoptosis in allogeneic stem cell grafts and the clinical outcome in malignant patients with unrelated donors

BackgroundThe quality of cells in peripheral blood stem cell (PBSC) grafts is important for allogeneic stem cell transplantation outcome. The viability of PBSC grafts may decrease during transportation time between donor and transplant center. We hypothesize that the graft viability based on apoptosis and necrosis in the graft may better reflect graft quality and clinical outcome.MethodsPBSC graft viability from unrelated donors was analyzed in 91 patients. Viable cells were defined as 7-aminoactinomycin D– and Annexin V–negative. The clinical outcome, including survival, transplant-related mortality and graft-versus-host disease (GvHD), was correlated to graft viability.ResultsGrafts transported for 1 day had a median viability of 86.4% (range 63.8 to 98.9%), and grafts transported for 2 days had median viability of 83.2% (range 52.8% to 96.2%) (P = .003). Grafts were divided into two groups based on the median graft viability of 85.1%. Patients who received low viability grafts had lower 1-year survival of 63.7% compared with 88.9% for those who received high viability grafts (P = .007). In the multivariate analysis, transplant-related mortality (TRM) was higher in the low viability group (P = .03), whereas overall survival was not significantly associated with graft viability. The incidence of acute GvHD grade II to IV, chronic GvHD and relapse risk remained comparable between the groups.ConclusionLow graft viability was an independent predictor of 1-year survival and TRM after adjusting for multiple confounders. Better graft quality markers are important for the detection of clinically important variations in the stem cell graft.