Origin and mode of replication of plasmids pE194 and pUB110

Replication of the multicopy antibiotic resistance plasmids pE194 and pUB110 has been studied in Bacillus subtilis. Based on electron microscopic analysis of replication intermediates and on evidence from deletants, we have determined that both plasmids replicate unidirectionally from fixed origins by a Θ mechanism. The location of these origins and the directions of replication have been determined relative to the physical maps. A cointegrate of pE194 and pUB110 has also been studied and evidence is presented from electron microscopy, temperature resistance, and copy number analysis that the cointegrate uses both parental replication origins.     

Localization of the replication origin of plasmid pE194.

The pE194 replication origin was localized to a 265-base-pair interval by analyzing the ability of purified pE194 restriction fragments to direct replication of heterologous plasmids. Replication was dependent upon RepF protein supplied in trans. The origin region contained a GC-rich dyad symmetry which may serve as the RepF target.     

In vitro recognition of the replication origin of pLS1 and of plasmids of the pLS1 family by the RepB initiator protein.

Rolling-circle replication of plasmid pLS1 is initiated by the plasmid-encoded RepB protein, which has nicking-closing (site-specific DNA strand transferase) enzymatic activity. The leading-strand origin of pLS1 contains two regions, (i) the RepB-binding site, constituted by three directly repeated sequences (iterons or the bind region), and (ii) the sequence where RepB introduces the nick to initiate replication (the nic region). A series of plasmids, belonging to the pLS1 family, show features similar to those of pLS1 and have DNA sequences homologous to the pLS1 nic region. In addition, they all share homologies at the level of their Rep proteins. However, the bind regions of these plasmids are, in general, not conserved. We tested the substrate specificity of purified RepB of pLS1. The RepB protein has a temperature-dependent nicking-closing action on supercoiled pLS1, as well as on recombinant plasmid DNAs harboring the pLS1 nic region. The DNA strand transferase activity of pLS1-encoded RepB was also assayed on two plasmids of the pLS1 family, namely, pE194 and pFX2. DNAs from both plasmids were relaxed by RepB, provided they had a proper degree of supercoiling; i.e., it was necessary to modulate the supercoiling of pE194 DNA to achieve RepB-mediated DNA relaxation. Single-stranded oligonucleotides containing the nic regions of various plasmids belonging to the pLS1 family, including those of pE194 and pFX2, were substrates for RepB. In vitro, the RepB protein does not need to bind to the iterons for its nicking-closing activity.     

Plus-origin mapping of single-stranded DNA plasmid pE194 and nick site homologies with other plasmids.

Staphylococcus aureus plasmid pE194 manifests a natural thermosensitivity for replication and can be established in several species, both gram positive and gram negative, thus making it attractive for use as a delivery vector. Like most characterized plasmids of gram-positive bacteria, pE194 generates single-stranded DNA. The direction of pE194 replication is clockwise, as determined by the strandedness of free single-stranded DNA. Significant homology exists between a 50-base-pair sequence in the origin of pE194 and sequences present in plasmids pMV158 (Streptococcus agalactiae), pADB201 (Mycoplasma mycoides), and pSH71 (Lactococcus lactis). We used an initiation-termination reaction, in which pE194 initiates replication at its own origin and is induced to terminate at the related pMV158 sequence, to demonstrate that pE194 replicates by a rolling-circle mechanism; the initiation nick site was localized to an 8-base-pair sequence.     

Imprecise excision of plasmid pE194 from the chromosomes of Bacillus subtilis pE194 insertion strains.

Plasmid pE194 has been shown to be rescued by integration after cultivation of infected Bacillus subtilis recE4 cells at a restrictive high temperature. The plasmid is also spontaneously excised from the chromosome at a low frequency by precise or imprecise excision (J. Hofemeister, M. Israeli-Reches, and D. Dubnau, Mol. Gen. Genet. 189:58-68, 1983). We have investigated nine excision plasmids, carrying insert DNA 1 to 6 kbp in length, either in a complete pE194 or in a partially deleted pE194 copy. Type 1 (additive) excision plasmids have the left- and right-junction DNAs preserved as 13-bp direct repeats (5'-GGGGAGAAAACAT-3') corresponding to the region between positions 864 and 876 in pE194. In type 2 (substitutive) excision plasmids, a conserved 13-bp sequence remains only at the right junction while the left junction has been deleted during the excision process. The type 3 excision plasmid carries at each junction the tetranucleotide 5'-TCCC-3', present in pE194 between positions 1995 and 1998. Although we isolated the excision plasmids from different integration mutants, the insert DNAs of eight independently isolated plasmids showed striking sequence homology, suggesting that they originated from one distinct region of the B. subtilis chromosome. Thus, we postulate that imprecise excision of pE194 occurs most frequently after its translocation from the original insertion site into a preferred excision site within the host chromosome. The imprecise excision from this site occurs at excision breakpoints outside the pE194-chromosome junctions in a chromosomal region which remains to be investigated further.     

Homology of mycoplasma plasmid pADB201 and staphylococcal plasmid pE194.

The complete nucleotide sequence of pADB201, a 1.7-kilobase cryptic plasmid from Mycoplasma mycoides subsp. mycoides, is reported. The sequence contains a single large open reading frame capable of coding for a polypeptide of up to 198 codons long. The sequence of the putative polypeptide shows significant similarity to that of the repF gene product of staphylococcal plasmid pE194.     

Replication and incompatibility properties of plasmid pE194 in Bacillus subtilis.

pE194, a 3.5-kilobase multicopy plasmid, confers resistance to the macrolide-lincosamide-streptogramin B antibiotics in Bacillus subtilis. By molecular cloning and deletion analysis we have identified a replication segment on the physical map of this plasmid, which consists of about 900 to 1,000 base pairs. This segment contains the replication origin. It also specifies a trans-acting function (rep) required for the stable replication of pE194 and a negatively acting copy control function which is the product of the cop gene. The target sites for the rep and cop gene products are also within this region. Two incompatibility determinants have been mapped on the pE194 genome and their properties are described. One (incA) resides within the replication region and may be identical to cop. incB, not located in the replication region, expresses incompatibility toward a copy control mutant (cop-6) but not toward the wild-type replicon.     

Comparison of 10 IncP plasmids: homology in the regions involved in plasmid replication.

We have examined the DNA homology in the replication regions of 10 IncP plasmids independently isolated from several different countries. Two regions of RK2, the best-studied plasmid of this group, are required for vegetative DNA replication: the origin of replication (oriV) and the trfA region, which codes for a gene product necessary for replication. Six of nine IncP plasmids studied were identical to RK2 in the oriV and trfA regions as shown by Southern hybridization. Three P plasmids, R751, R772, and R906, showed weaker homology with the RK2 trfA, region and hybridized to different-sized HaeII fragments than the other six plasmids. R751, R772, and R906 hybridized to the region of the RK2 replication origin which expresses P incompatibility but differed markedly from RK2 and the other six plasmids in the GC-rich region of the origin required for replication. These data indicate that the P-group plasmids can be divided into two subgroups: IncP alpha, which includes the RK2-like plasmids, and IncP beta which includes the R751-like plasmids.     

Identification of plasmid and Bacillus subtilis chromosomal recombination sites used for pE194 integration.

The plasmid pE194 (3.7 kilobases) is capable of integrating into the genome of the bacterial host Bacillus subtilis in the absence of the major homology-dependent RecE recombination system. Multiple recombination sites have been identified on both the B. subtilis chromosome and pE194 (J. Hofemeister, M. Israeli-Reches, and D. Dubnau, Mol. Gen. Genet. 189:58-68, 1983). The B. subtilis chromosomal recombination sites were recovered by genetic cloning, and these sites were studied by nucleotide sequence analysis. Recombination had occurred between regions of short nucleotide homology (6 to 14 base pairs) as indicated by comparison of the plasmid and the host chromosome recombination sites with the crossover sites of the integration products. Recombination between the homologous sequences of the plasmid and the B. subtilis genome produced an integrated pE194 molecule which was bounded by direct repeats of the short homology. These results suggest a recombination model involving a conservative, reciprocal strand exchange between the two recombination sites. A preferred plasmid recombination site was found to occur within a 70-base-pair region which contains a GC-rich dyad symmetry element. Five of seven pE194-integrated strains analyzed had been produced by recombination at different locations within this 70-base-pair interval, located between positions 860 and 930 in pE194. On the basis of these data, mechanisms are discussed to explain the recombinational integration of pE194.     

Nucleotide sequence of the constitutive macrolide-lincosamide-streptogramin B resistance plasmid pNE131 from Staphylococcus epidermidis and homologies with Staphylococcus aureus plasmids pE194 and pSN2.

The complete nucleotide sequence of the Staphylococcus epidermidis plasmid pNE131 is presented. The plasmid is 2,355 base pairs long and contains two major open reading frames. A comparison of the pNE131 DNA sequence with the published DNA sequences of five Staphylococcus aureus plasmids revealed strong regional homologies with two of them, pE194 and pSN2. The region of pNE131 containing the reading frame which encodes the constitutive ermM gene is almost identical to the inducible ermC gene region of pE194, except for a 107-base-pair deletion which removes the mRNA leader sequence required for inducible expression. A second region of pNE131 contains an open reading frame with homology to the small cryptic plasmid pSN2 and potentially encodes a 162-amino-acid protein.     

Roles of long and short replication initiation proteins in the fate of IncP-1 plasmids

Broad-host-range IncP-1 plasmids generally encode two replication initiation proteins, TrfA1 and TrfA2. TrfA2 is produced from an internal translational start site within trfA1. While TrfA1 was previously shown to be essential for replication in Pseudomonas aeruginosa, its role in other bacteria within its broad host range has not been established. To address the role of TrfA1 and TrfA2 in other hosts, efficiency of transformation, plasmid copy number (PCN), and plasmid stability were first compared between a mini-IncP-1β plasmid and its trfA1 frameshift variant in four phylogenetically distant hosts: Escherichia coli, Pseudomonas putida, Sphingobium japonicum, and Cupriavidus necator. TrfA2 was sufficient for replication in these hosts, but the presence of TrfA1 enhanced transformation efficiency and PCN. However, TrfA1 did not contribute to, and even negatively affected, long-term plasmid persistence. When trfA genes were cloned under a constitutive promoter in the chromosomes of the four hosts, strains expressing either both TrfA1 and TrfA2 or TrfA1 alone, again, generally elicited a higher PCN of an IncP1-β replicon than strains expressing TrfA2 alone. When a single species of TrfA was produced at different concentrations in E. coli cells, TrfA1 maintained a 3- to 4-fold higher PCN than TrfA2 at the same TrfA concentrations, indicating that replication mediated by TrfA1 is more efficient than that by TrfA2. These results suggest that the broad-host-range properties of IncP-1 plasmids are essentially conferred by TrfA2 and the intact replication origin alone but that TrfA1 is nonetheless important to efficiently establish plasmid replication upon transfer into a broad range of hosts.     

Overproduction of Escherichia coli replication proteins by the use of runaway-replication plasmids.

A derivative of the runaway-replication plasmid was constructed. This plasmid, pSY343, has the gene for kanamycin resistance and single sites for EcoRI, BamHI, HindIII, KpnI, and XhoI that can be used as cloning sites without inactivating the kanamycin resistance gene or the replication genes. Three replication genes of Escherichia coli were cloned on the plasmid. The activity of dnaA, dnaZ, and ssb gene products were 200-, 90-, and 60-fold greater, respectively, in the cells containing these plasmids than in normal cells.     

Plasmid copy number control: isolation and characterization of high-copy-number mutants of plasmid pE194.

A plasmid, pE194, obtained from Staphylococcus aureus confers resistance to macrolide, lincosamide, and streptogramin type B ("MLS") antibiotics. For full expression, the resistance phenotype requires a period of induction by subinhibitory concentrations of erythromycin. A copy number in the range of 10 to 25 copies per cell is maintained during cultivation at 32 degrees C. It is possible to transfer pE194 to Bacillus subtilis by transformation. In B. subtilis, the plasmid is maintained at a copy number of approximately 10 per cell at 37 degrees C, and resistance is inducible. Tylosin, a macrolide antibiotic which resembles erythromycin structurally and to which erythromycin induces resistance, lacks inducing activity. Two types of plasmid mutants were obtained and characterized after selection on medium containing 10 microgram of tylosin per ml. One mutant class appeared to express resistance constitutively and maintained a copy number indistinguishable from that of the parent plasmid. The other mutant type had a 5- to 10-fold-elevated plasmid copy number (i.e., 50 to 100 copies per cell) and expressed resistance inducibly. Both classes of tylosin-resistant mutants were shown to be due to alterations in the plasmid and not to modifications of the host genome.     

Rolling-circle replication of bacterial plasmids.

Many bacterial plasmids replicate by a rolling-circle (RC) mechanism. Their replication properties have many similarities to as well as significant differences from those of single-stranded DNA (ssDNA) coliphages, which also replicate by an RC mechanism. Studies on a large number of RC plasmids have revealed that they fall into several families based on homology in their initiator proteins and leading-strand origins. The leading-strand origins contain distinct sequences that are required for binding and nicking by the Rep proteins. Leading-strand origins also contain domains that are required for the initiation and termination of replication. RC plasmids generate ssDNA intermediates during replication, since their lagging-strand synthesis does not usually initiate until the leading strand has been almost fully synthesized. The leading- and lagging-strand origins are distinct, and the displaced leading-strand DNA is converted to the double-stranded form by using solely the host proteins. The Rep proteins encoded by RC plasmids contain specific domains that are involved in their origin binding and nicking activities. The replication and copy number of RC plasmids, in general, are regulated at the level of synthesis of their Rep proteins, which are usually rate limiting for replication. Some RC Rep proteins are known to be inactivated after supporting one round of replication. A number of in vitro replication systems have been developed for RC plasmids and have provided insight into the mechanism of plasmid RC replication.     

Circular and linear plasmids of Lyme disease spirochetes have extensive homology: characterization of a repeated DNA element.

We have cloned three copies of a repeated DNA segment from Borrelia burgdorferi sensu stricto strain B31, present on both circular and linear plasmids of this and other B. burgdorferi sensu lato strains. The DNA sequences are characterized by a highly homologous segment containing two open reading frames (ORFs), ORF-A and ORF-B. Five additional ORFs can be found on the slightly less homologous flanking sequences: ORF-G on the opposite strand upstream of ORF-A, and ORF-C, ORF-D, ORF-E, and ORF-F downstream of ORF-B. The 4.6-kb-long element containing ORF-A through ORF-E is flanked by approximately 180-bp-long imperfect inverted repeats (IRs). The putative gene product of ORF-C displays homology to proteins involved in plasmid maintenance in a number of gram-positive and gram-negative bacteria. ORF-E features several short, highly homologous direct repeats. ORF-A, ORF-B, and ORF-D are homologous to three ORFs on a recently described 8.3-kb circular plasmid of Borrelia afzelii Ip21 that are flanked by similar IRs (J. J. Dunn, S. R. Buchstein, L.-L. Butler, S. Fisenne, D. S. Polin, B. N. Lade, and B. J. Luft, J. Bacteriol. 176:2706-2717,1994). ORF-C and ORF-E, however, are missing from this region on the Ip21 plasmid. Furthermore, the repeated DNA element as defined by the IRs is present in opposite orientations relative to the flanking sequences on the B31 and Ip21 plasmids.