Lack of hotspot targets: a constraint for IS30 transposition in Salmonella

IS30 is an insertion element common in E. coli strains but rare or absent in Salmonella. Transfer of the IS30-flanked transposon Tn2700 to Salmonella typhimurium was assayed using standard delivery procedures of bacterial genetics (conjugation and transduction). Tn2700 'hops' were rare and required transposase overproduction, suggesting the existence of host constraints for IS30 activity. Sequencing of three Tn2700 insertions in the genome of S. typhimurium revealed that the transposon had been inserted into sites with a low homology to the IS30 consensus target, suggesting that inefficient Tn2700 transposition to the Salmonella genome might be caused by a lack of hotspot targets. This view was confirmed by the introduction of an IS30 'hot target sequence', whose sole presence permitted Tn2700 transposition without transposase overproduction. Detection of IS30-induced DNA rearrangements in S. typhimurium provided further evidence that the element undergoes similar activities in E. coli and S. typhimurium. Thus, hotspot absence may be the main (if not the only) limitation for IS30 activity in the latter species. If these observations faithfully reproduce the scenario of natural populations, establishment of IS30 in the Salmonella genome may have been prevented by a lack of DNA sequences closely related to the unusually long (24 bp) IS30 consensus target.     

IS50-mediated inverse transposition: specificity and precision

The IS50 elements, which are present as inverted repeats in the kanamycin-resistance transposon, Tn5, can move in unison carrying with them any interstitial DNA segment. In consequence, DNA molecules such as a lambda::Tn5 phage genome are composed of two overlapping transposons - the kan segment bracketed by IS50 elements (Tn5), and lambda bracketed by IS50 elements. During direct transposition, mediated by IS50 "O" (outside) ends, the kan gene is moved and the lambda vector is left behind. During inverse transposition, mediated by the "I" (inside) ends of the IS50 elements, the lambda vector segment is moved and the kan gene is left behind. Direct transposition is several orders of magnitude more frequent than inverse transposition (Isberg and Syvanen, 1981; Sasakawa and Berg, 1982). We assessed the specificity and precision of the rare events mediated by pairs of I ends by mapping and sequencing independent inverse transpositions from a lambda::Tn5 phage into the amp and tet genes of plasmid pBR322. Using restriction analyses, 32 and 40 distinct sites of insertion were found among 46 and 72 independent inverse transpositions into the amp and tet genes, respectively. Eleven sites were used in two or more insertion events, and the two sites in tet used most frequently corresponded to major hotspots for the insertion of the Tn5 (by direct transposition). The sequences of 22 sites of inverse transposition (including each of the sites used more than once) were determined, in eleven cases by analyzing both pBR322-IS50 junctions, and in eleven others by sequencing one junction. The sequence of the "I" end of IS50 was preserved and 9-bp target sequence duplications were present in every case analyzed. GC pairs were found at each end of the target sequence duplication in ten of the eleven sites used more than once, and also in seven of the other eleven sites. Our data indicate that transposition mediated by pairs of "I" ends is similar in its specificity and precision to the more frequent transposition mediated by IS50 "O" ends.     

IS30, a new insertion sequence of Escherichia coli K12

Summary Three independent spontaneous mutations of prophage P1 affecting the ability of the phage to reproduce vegetatively are due to the insertion of a mobile genetic element, called IS 30. The same sequence is also carried in the R plasmid NR 1-Basel, but not in the parental plasmid NR 1. Southern hybridisation study indicates that the Escherichia coli K 12 chromosome carries several copies of IS 30 as a normal resident. IS 30 is 1.2 kb long and contains unique restriction cleavage sites for Bg/II, ClaI, HindIII, NciI and HincII, and it is cleaved twice by the enzymes HpaII and TaqI. The ends of IS 30 are formed by 26 bp long inverted repeats with 3 bases mismatched. Upon transposition IS 30 generates a duplication of only 2 bp of the target. The following observations suggest a pronounced specificity in target selection by IS 30. In transposition to the phage P 1 genome a single integration site was used three times independently, and in both orientations. A short region of sequence homology has been identified between the P 1 and NR 1-Basel insertion sites. IS 30 has mediated cointegration as well as deletion. The entire IS 30 sequences were duplicated in the cointegrates between a pBR 322 derivative containing IS 30 and the genome of phage P 1–15, and several loci on the P1–15 genome served as fusion sites, some of which were used more than once.     

The mobile element IS1207 of Brevibacterium lactofermentum ATCC21086: isolation and use in the construction of Tn5531, a versatile transposon for insertional mutagenesis of Corynebacterium glutamicum

IS1207 is the insertion most frequently found among the spontaneous mutations that abolish the activity of an Escherichia coli phage lambda cI gene integrated in the Corynebacterium Brevibacterium lactofermentum ATCC21086 genome. We examined the transposition of transposon-like structures composed of a selective kanamycin resistance gene (aph3), and one or two IS1207 sequences. One of these, the Tn5531 transposon, transposed efficiently in Corynebacterium glutamicum. A replicative and a non-replicative Tn5531 delivery vector were used in Tn5531 mutagenesis. As IS1207, transposon Tn5531 shows a high frequency of transposition and mutagenesis, and a low target specificity. These features make of Tn5531 an adequate choice for gene identification and gene tagging experiments.     

Transposon Tn10: genetic organization, regulation, and insertion specificity

Transposon Tn10 is a composite element in which two individual insertion sequence (IS)-like sequences cooperate to mediate transposition of the intervening material. The two flanking IS10 elements are not identical; IS10-right is responsible for functions required to promote transposition, and IS10-left is defective in transposition functions. We suggest that the two IS10 elements were originally identical in sequence and have subsequently diverged. IS10-right is compactly organized with structural gene(s), promoters, and sites important for transposition and (presumably) its regulation all closely linked and, in some cases, overlapping. IS10 has a single major coding region that almost certainly encodes an essential transposition function. A pair of opposing promoters flank the start of this coding region. One of these promoters is responsible for expression in vivo of transposon-encoded transposition functions. We propose that the second promoter is involved in modulation of Tn10 transposition. Genetic analysis suggests that transposon-encoded function(s) may be preferentially cis-acting. Insertion of Tn10 into particular preferred target sites is due primarily to the occurrence of a particular six-base pair target DNA sequence. The properties of this sequence suggest that symmetrically disposed subunits of a single protein may be responsible for both recognition and cleavage of target DNA during insertion.     

Identification of a second endogenous Porphyromonas gingivalis insertion element.

In this study a second endogenous Porphyromonas gingivalis insertion element (IS element) that is capable of transposition within P. gingivalis was identified. Nucleotide sequence analysis of the Tn4351 insertion site in a P. gingivalis Tn4351-generated transconjugant showed that a complete copy of the previously unidentified IS element, designated PGIS2, had inserted into IS4351R in Tn4351. PGIS2 is 1,207 bp in length with 19-bp imperfect terminal inverted repeats, and insertion resulted in a duplicated 10-bp target sequence. Results of Southern hybridization of chromosomal DNA isolated from several P. gingivalis strains with a PGIS2-specific probe demonstrated that the number of copies of PGIS2 per genome varies among different P. gingivalis strains. Computer analysis of the putative polypeptide encoded by PGIS2 revealed strong homologies to the products encoded by IS1358 from Vibrio cholerae, ISAS1 from Aeromonas salmonicida, and H-rpt in Escherichia coli K-12.     

Genetic organization of transposon Tn10

Transposon Tn10 is 9300 bp in length, with 1400 bp inverted repeats at its ends. The inverted repeats are structurally intact IS-like sequences (Ross et al., 1979). Analysis of deletion mutants and structural variants of Tn10, reported below, shows that the two IS10 segments contain all of the Tn10-encoded genetic determinants, both sites and functions, that are required for transposition. Furthermore, the two repeats (IS10-Right and IS10-Left) are not functionally equivalent: IS10-Right is fully functional and is capable by itself of promoting normal levels of Tn10 transposition; IS10-Left functions only poorly by itself, promoting transposition at a very low level when IS10-Right is inactivated. Complementation analysis shows that IS10-Right encodes at least one function, required for Tn10 transposition, which can act in trans and which works at the ends of the element. Also, all of the sites specifically required for normal Tn10 transposition have been localized to the outermost 70 bp at each end of the element; there is no evidence that specific sites internal to the element play an essential role. Finally, Tn10 modulates its own transposition in such a way that transposition-defective point mutants, unlike deletion mutants, are not complemented by functions provided in trans; and wild-type Tn10, unlike deletion mutants, is not affected by functions provided in trans from a "high hopper" Tn10 element.     

Regional Specificity of Illegitimate Recombination by the Translocatable Amplicillin-Resistance Element Tn1 in the Genome of Phage P22

Insertions of the translocatable ampicillin-resistance element Tn1 were selected in the genome of the temperate Salmonella phage P22 by growing the phage on hosts carrying the resistance plasmid RP4. Insertions of Tn1 into phage P22 are rare (10(-10) per phage) and nonrandomly distributed in the P22 genome. They are found mainly in the vicinity of the P22 ant gene. Insertions within the ant gene are found at many (at least 15) genetically separable sites, are found equally frequently in both orientations and cause irreversible loss of gene function. Some insertions in ant appear to be associated with an adjecent deletion. Prophage deletions were derived from P22::Tn1 phages by two methods. Low multiplicity transductants have nonrandomly distributed endpoints. One end is at or very near the site of the Tn1 insertion, and the other is in the vicinity of gene 12; however, there are many genetically distinguishable endpoints within gene 12. Prophage deletions selected as survivors of induction of a P22Ap mnt-ts lysogen have similarly nonrandom endpoints, with the Tn1-distal end frequently near the ant gene, as well as gene 12. Physical analysis of several prophage deletions suggests that the Tn1 is intact to the resolution of DNA electron microscopy and that the deletions begin at the end of the Tn1 insertion. These results suggest that illegitimate recombination associated with Tn1 shows regional specificity (i.e., preference for some large areas of the P22 genome over other areas), but that within these regions is quite nonspecific.     

IS2 insertion is a major cause of spontaneous mutagenesis of the bacteriophage P1: non-random distribution of target sites

Insertion mutations arising spontaneously in the P1 prophage and affecting vegetative phage reproduction were screened for the presence of insertion sequence 2 (IS2). Filter hybridization identified 28 out of 44 independent insertions as IS2. Their target specificity is not random. A region that amounts to < 2% of the phage genome had trapped 15 of the 28 IS2 elements. However, precise mapping of nine mutants in this hot spot segment revealed no preferred insertion site. Rather, the nine IS2 are distributed over the whole target segment and IS2 are found in both orientations. Sequence data indicate that at least two sequence variants of IS2 participated in mutagenesis of the phage genome. The detectable transposition of IS2 from the host chromosome to the prophage occurs with a frequency of 3 x 10(-5) per cell per generation under the particular experimental conditions. It is concluded that IS2, a natural resident of Escherichia coli K12 strains, is an important agent for spontaneous mutagenesis and exerts this action non-randomly along the genome.     

IS231A from Bacillus thuringiensis is functional in Escherichia coli: transposition and insertion specificity.

A kanamycin resistance gene was introduced within the insertion sequence IS231A from Bacillus thuringiensis, and transposition of the element was demonstrated in Escherichia coli. DNA sequencing at the target sites showed that IS231A transposition results in direct repeats of variable lengths (10, 11, and 12 bp). These target sequences resemble the terminal inverted repeats of the transposon Tn4430, which are the preferred natural insertion sites of IS231 in B. thuringiensis.     

Structural and functional analyses of the fosfomycin resistance transposon Tn2921.

The fosfomycin resistance transposon Tn2921 is flanked by directly repeated sequences homologous to the Tn10-related insertion sequence IS10. The nonrepeated DNA sequences of Tn2921 can be deleted without affecting the transposition ability of the element, showing that at least one of the direct repeats is an active insertion sequence. Transposition of Tn2921 seems to occur through direct transposition, since cointegrates have not been observed. The evolutionary relatedness of Tn2921 and IS10 is discussed.     

A derivative of Tn5 with direct terminal repeats can transpose

The 5.7 kb⁴ transposable kanamycin resistance determinant Tn5 contains 1.5 kb terminal inverted repeats which we here call arms. Tn5's arms contain the genes and sites necessary for Tn5 transposition, and are not homologous to previously described transposable elements. To determine whether one or both arms is a transposable (IS) element, we transposed Tn5 to pBR322 and used restriction endonuclease digestion and ligation in vitro to generate plasmid derivatives designated pTn5-DR1 and pTn5-DR2 in which Tn5's arms were present in direct rather than in inverted orientation. Analysis of transposition products from dimeric forms of the pTn5-DR1 plasmid to phage λ showed that the outside and inside termini of right and of left arms could function in transposition. We conclude that both of Tn5's arms are transposable elements and name them IS50L (left) and IS50R (right). IS50R, which encodes transposase, was used several-fold more frequently than IS50L, which contain an ochre mutant allele of transposase: this implies that Tn5's transposase acts preferentially on the DNA segment which encodes it. Analysis of transpositions of the amp^rkan^r element Tn5-DR2 to the lac operon showed that Tn5-DR2, like Tn5 wild-type, exhibits regional preference without strict site specificity in the choice of insertion sites.     

IS10/Tn10 transposition efficiently accommodates diverse transposon end configurations.

Transposon Tn10 and its component insertion sequence IS10 move by non-replicative transposition. We have studied the array of reaction intermediates and products in a high efficiency in vitro IS10/Tn10 transposition reaction. Synapsis of two transposon ends, followed by cleavage and strand transfer, can occur very efficiently irrespective of the relative locations and orientations of the two ends. The two participating ends can occur in inverted or direct orientation on the same molecule or, most importantly, on two different molecules. This behavior contrasts sharply with that of Mu, in which transposition is strongly biased in favor of inverted repeat synapsis. Mechanistically, the absence of discrimination amongst various end configurations implies that the architecture within the IS10/Tn10 synaptic complex is relatively simple, i.e. lacking any significant intertwining of component DNA strands. Biologically these observations are important because they suggest that the IS10 insertion sequence module has considerable flexibility in the types of DNA rearrangements that it can promote. Most importantly, it now seems highly probable that a single non-replicative IS10 element can promote DNA rearrangements usually attributed to replicative transposition, i.e. adjacent deletions and cointegrates, by utilizing transposon ends on two sister chromosomes. Other events which probably also contribute to the diversity of IS10/Tn10-promoted rearrangements are discussed.     

Spontaneous transposition in the bacteriophage lambda cro gene residing on a plasmid.

A new mutagenesis assay system based on the phage lambda cro repressor gene residing on a plasmid was developed. The assay detects mutations in cro that decrease the binding of the repressor to the OR operator in an OR PR-lacZ fusion present in a lambda prophage. Mutations arose spontaneously during growth of E. coli cells harboring cro plasmids at a frequency of 3-6 x 10(-6). Analysis of some 200 cro mutants from several 'wild-type' strains revealed a substantial fraction of 25-70% insertion events caused by transposition of IS elements. Most of the insertions were caused by IS1, but IS5 insertions were observed too. In strains harboring Tn10, IS10 was responsible for most insertions. Restriction nuclease digestion analysis revealed a preference for insertion of IS10 into the C-terminal half of cro, despite the absence of sequences which are known hot spots for Tn10 insertions. The frequency of IS1 insertions into cro decreased 25-60-fold and that of IS10 insertions decreased 200-fold in cells carrying the recA56 mutation, suggesting that RecA is involved in transposition of these elements. During the logarithmic phase of growth, the mutation frequency was constant for at least 22 generations; however, upon continuous incubation at the stationary phase, the mutation frequency gradually increased, yielding a 3-fold increase in the frequency of insertion and a 4-5-fold increase in point mutation. Genomic Southern analysis of chromosomal IS elements in cells which underwent a transposition from the chromosome into the cro plasmid revealed that the number and distribution of IS1 and IS5 were usually unaltered compared to cells which did not undergo a transposition event. In contrast, essentially each IS10 transposition was accompanied by multiple events which led to changes in the number and distribution of chromosomal IS10 elements.     

Physical Analysis of Tn10- and Is10-Promoted Transpositions and Rearrangements

We have investigated by Southern blot hybridization the rate of IS10 transposition and other Tn10/IS10-promoted rearrangements in Escherichia coli and Salmonella strains bearing single chromosomal insertions of Tn10 or a related Tn10 derivative. We present evidence for three primary conclusions. First, the rate of IS10 transposition is approximately 10(-4) per cell per bacterial generation when overnight cultures are grown and plated on minimal media and is at least ten times more frequent than any other Tn10/IS10-promoted DNA alteration. Second, all of the chromosomal rearrangements observed can be accounted for by two previously characterized Tn10-promoted rearrangements: deletion/inversions and deletions. Together these rearrangements occur at about 10% the rate of IS10 transposition. Third, the data suggest that intramolecular Tn10-promoted rearrangements preferentially use nearby target sites, while the target sites for IS10 transposition events are scattered randomly around the chromosome.     

Multiple copies of IS10 in the Enterobacter cloacae MD36 chromosome.

Repetitive sequences were isolated and characterized as double-stranded DNA fragments by treatment with S1 nuclease after denaturation and renaturation of the total DNA of Enterobacter cloacae MD36. One repetitive sequence was identical to the nucleotide sequence of IS10-right (IS10R), which is the active element in the plasmid-associated transposon Tn10. Unexpectedly, 15 copies of IS10R were found in the chromosomal DNA of E. cloacae MD36. One copy of the central region of Tn10 was found in the total DNA of E. cloacae MD36. IS10Rs in restriction fragments isolated from the E. cloacae MD36 total DNA showed 9-bp duplications adjacent to the terminal sequences that are characteristic of Tn10 transposition. This result suggests that many copies of IS10R in E. cloacae MD36 are due to transposition of IS10R alone, not due to transposition of Tn10 or to DNA rearrangement. I also found nine copies of IS10 in Shigella sonnei HH109, two and four copies in two different natural isolates of Escherichia coli, and two copies in E. coli K-12 strain JM109 from the 60 bacterial strains that were examined. All dam sites in the IS10s in E. cloacae MD36 and S. sonnei HH109 were methylated. Tn10 and IS10 transpose by a mechanism in which the element is excised from the donor site and inserted into the new target site without significant replication of the transposing segment; thus, the copy numbers of the elements in the cell are thought to be unchanged in most circumstances. Accumulation of IS10 copies in E. cloacae MD36 has interesting evolutionary implications.     

Evolution of Tn21-related transposons: isolation of Tn2425, which harbours IS161

The isolation of two multi-resistance transposons, Tn2425 and Tn1831, and their relation to Tn21 and Tn2424, is described. A 1.7 kb segment present in Tn2424 and Tn2425 was identified as an IS element by rec-independent transposition, resulting in a cointegrate structure that carries two direct repeated copies of the IS element. By the isolation of this IS element we demonstrated that transposition is one mechanism leading to sequence variations in Tn21-like structures, especially in the region between the mer operon and the sul gene.