Molecular cloning of the RAD10 gene of Saccharomyces cerevisiae

We have cloned the RAD10 gene of Saccharomyces cerevisiae and physically mapped it to a 1.0-kb DNA fragment. Strains containing disruptions of the RAD10 gene were found to show enhanced UV sensitivity compared with the previously characterized rad10-1 or rad10-2 mutants. The UV sensitivity of the disruption mutant is comparable to the highly UV sensitive rad1-19, rad2-delta, and rad3-2 mutants.     

Nucleotide sequence and functional analysis of the RAD1 gene of Saccharomyces cerevisiae.

The RAD1 gene of Saccharomyces cerevisiae is involved in excision repair of damaged DNA. The nucleotide sequence of the RAD1 gene presented here shows an open reading frame of 3,300 nucleotides. Two ATG codons occur in the open reading frame at positions +1 and +334, respectively. Since a deletion of about 2.7 kilobases of DNA from the 5' region of the RAD1 gene, which also deletes the +1 ATG and 11 additional codons in the RAD1 open reading frame, partially complements UV sensitivity of a rad1 delta mutant, we examined the role of the +1 ATG and +334 ATG codons in translation initiation of RAD1 protein. Mutation of the +1 ATG codon to ATC affected the complementation ability of the RAD1 gene, whereas mutation of the +334 ATG codon to ATC showed no discernible effect on RAD1 function. These results indicate that translation of RAD1 protein is initiated from the +1 ATG codon. Productive in-frame RAD1-lacZ fusions showed that the RAD1 open reading frame is expressed in yeasts. The RAD1-encoded protein contains 1,100 amino acids with a molecular weight of 126,360.     

Nucleotide sequence of the RAD10 gene of Saccharomyces cerevisiae.

The RAD10 gene is one of several genes in Saccharomyces cerevisiae required for incision of u.v.-irradiated or cross-linked DNA. We have determined the nucleotide sequence of the RAD10 gene and its flanking regions. The RAD10 nucleotide sequence presented here differs significantly from that recently reported. The RAD10 protein predicted from the nucleotide sequence contains 210 amino acids with a calculated mol. wt. of 24 310. The middle portion of the RAD10 protein, which is highly basic and also contains eight of the total of 10 tyrosine residues present in the protein, may be involved in DNA binding by ionic interactions and tyrosine intercalation between the bases of DNA. A genomic deletion of the entire RAD10 gene does not affect viability; however, the rad10 deletion mutant is highly u.v. sensitive.     

Molecular cloning of Saccharomyces cerevisiae CDC6 gene. Isolation, identification, and sequence analysis

The CDC6 gene product is required for entering the S phase of the cell cycle in Saccharomyces cerevisiae. It has been isolated on recombinant plasmids by selection for complementation of temperature-sensitive alleles with a yeast genomic library. The entire complementing activity is carried on a 1.8-kilobase chromosomal DNA fragment, as revealed by deletion mapping. Northern blotting shows that the size of the CDC6 mRNA is about 1.7 kilobases. A Southern blot of yeast chromosomes which were separated by the field inversion gel electrophoresis method indicates that the isolated DNA fragment is derived from chromosome X. The locus from which the clone was derived was marked by integration with a nutritional marker and found by meiotic mapping to cosegregate with CDC6. Thus, we conclude that we have isolated the authentic CDC6 gene. Nucleotide sequence analysis of the CDC6 gene has revealed an open reading frame that encodes a protein with Mr = 57,969. There are five potential Asn-X-(Ser/Thr) glycosylation sites and a highly conserved nucleotide-binding site in the CDC6 sequence. Although computer surveys indicate overall sequence homology between S. cerevisiae CDC6 protein and Saccharomyces pombe CDC10 START protein, they may not be functionally equivalent as evaluated by the complementation assay.     

Cloning and nucleotide sequence analysis of the Saccharomyces cerevisiae RAD4 gene required for excision repair of UV-damaged DNA

The RAD4 gene of Saccharomyces cerevisiae is required for the incision step of excision repair. We have cloned the RAD4 gene and determined its nucleotide sequence. RAD4 encodes a somewhat basic protein of 754 amino acids (aa) with an Mr of 87,173. RAD4 contains several groups of 4-7 consecutive basic aa residues that could be involved in DNA binding and it also contains an alpha-helix-turn-alpha-helix motif for DNA binding. Like several other DNA repair proteins of S. cerevisiae, the C terminus of RAD4 protein is highly acidic.     

Molecular cloning and nucleotide sequence of the streptavidin gene.

Using synthetic oligonucleotides as probes we have cloned the streptavidin gene from a genomic library of Streptomyces avidinii. Nucleotide sequence analysis indicated that a 2 Kb DNA-fragment contained the entire coding region, a signal peptide region and the 3' and 5' flanking regions of the gene. The deduced amino acid sequence shows several interrupted blocks of homology with the amino acid sequence of chicken egg-white avidin. Analysis of the secondary structure suggests a high content of beta-structure in both proteins and considerable overall structural similarity between them.     

Molecular cloning of the actin gene from yeast Saccharomyces cerevisiae.

Two overlapping DNA fragments from yeast Saccharomyces cerevisiae containing the actin gene have been inserted into pBR322 and cloned in E.coli. Clones were identified by hybridization to complementary RNA from a plasmid containing a copy of Dictyostelium actin mRNA. One recombinant plasmid obtained (pYA102) contains a 3.93-kb Hindlll fragment, the other (pYA208) a 5.1-kb Pstl fragment, both share a common 2.2-kb fragment harboring part of the actin gene. Cloned yeast actin DNA was identified by R-loop formation and translation of the hybridized actin mRNA and by DNA sequence analysis. Cytoplasmic actin mRNA has been estimated to be about 1250 nucleotides long. There is only one type of the actin gene in S.cerevisiae.     

Molecular cloning and nucleotide sequence of the gramicidin S synthetase 1 gene

The entire gene for gramicidin S synthetase 1 (GS 1) was cloned into the plasmid vector pUC18, and the nucleotide sequences of the GS 1 gene and its flanking region were determined. The full-length clone was 4,539 base pairs long and had an open reading frame of 3,294 nucleotides coding for 1,098 amino acids. The calculated molecular weight of 123,474 agreed with the apparent molecular weight of 120,000 found in SDS-PAGE of GS 1 from B. brevis. The nucleotide sequence of GS 1 gene was highly homologous to that of tyrocidine synthetase 1. The overall similarity between the deduced amino acid sequences of the two genes was 57.5%. The gene product of clone GS309 was easily purified to an essentially homogeneous state by ammonium sulfate fractionation followed by DEAE-Sepharose CL-6B, Ultrogel AcA-34, and second DEAE-Sepharose CL-6B column chromatography. The purified protein catalyzed the D-phenylalanine-dependent ATP-32PPi exchange reaction which is specific for GS 1 activity, and the specific activity of the purified product was nearly the same as the purified GS 1 from B. brevis. The product also showed a weak phenylalanine racemase activity.     

Molecular cloning and nucleotide sequence of the Corynebacterium glutamicum pheA gene.

The pheA gene of Corynebacterium glutamicum encoding prephenate dehydratase was isolated from a gene bank constructed in C. glutamicum. The specific activity of prephenate dehydratase was increased six-fold in strains harboring the cloned gene. Genetic and structural evidence is presented which indicates that prephenate dehydratase and chorismate mutase were catalyzed by separate enzymes in this species. The C. glutamicum pheA gene, subcloned in both orientations with respect to the Escherichia coli vector pUC8, was able to complement an E. coli pheA auxotroph. The nucleotide sequence of the C. glutamicum pheA gene predicts a 315-residue protein product with a molecular weight of 33,740. The deduced protein product demonstrated sequence homology to the C-terminal two-thirds of the bifunctional E. coli enzyme chorismate mutase-P-prephenate dehydratase.     

Molecular cloning and nucleotide sequence of Streptomyces griseus trypsin gene.

Streptomyces griseus trypsin (E.C. 3.4.21.4) is one of the major extracellular proteinase, which is secreted by S. griseus. The gene encoding S. griseus trypsin was isolated from a S. griseus genomic library by using a synthetic oligonucleotide probe. Fragments containing the gene for S. griseus trypsin were characterized by hybridization and demonstration of proteolytic activity in S. lividans. Deduced amino acid sequence from the nucleotide sequence suggests that S. griseus trypsin is produced as a precursor, consisting of three portions; an amino-terminal pre sequence (32 amino acid residues), a pro sequence (4 residues), and the mature trypsin. The S. griseus trypsin consists of 223 amino acids with a computed molecular weight of 23,112. The existence of proline at the pro and mature junction suggests that the processing of S. griseus trypsin is non-autocatalytic.     

Molecular cloning and nucleotide sequence of the HU-1 gene of Escherichia coli

Summary The Escherichia coli HU-1 was cloned by use of mixed synthetic oligonucleotides (17-mer) predicted from a portion of its amino acid sequence. The amino acid sequence of the HU-1 protein deduced from the nucleotide sequence is in good agreement with the published sequence. The nucleotide sequence has a possible promoter and a typical ribosomal binding site upstream from the translational initiation codon (GUG) of the HU-1 gene.     

The nucleotide sequence of the RAD3 gene of Saccharomyces cerevisiae: a potential adenine nucleotide binding amino acid sequence and a nonessential acidic carboxyl terminal region.

The RAD3 gene of Saccharomyces cerevisiae is required for excision of pyrimidine dimers and is essential for viability. We present the nucleotide sequence of the RAD3 protein coding region and its flanking regions, and the deduced primary structure of the RAD3 protein. In addition, we have mapped the 5' end of RAD3 mRNA. The predicted RAD3 protein contains 778 amino acids with a calculated molecular weight of 89,779. A segment of the RAD3 protein shares homology with several adenine nucleotide binding proteins, suggesting that RAD3 protein may react with ATP. The twenty carboxyl terminal amino acids of RAD3 protein are predominantly acidic; however, deletion of this acidic region has no obvious effect on viability or DNA repair.     

The nucleotide sequence of the PRI1 gene related to DNA primase in Saccharomyces cerevisiae.

The PRI1 gene of Saccharomyces cerevisiae encodes for the p48 polypeptide of DNA primase. We have determined the nucleotide sequence of a 1,965 bp DNA fragment containing the PRI1 locus. The entire coding sequence of the gene lies within an open reading frame, and there are 409 amino acids in the single polypeptide protein if translation is assumed to start at the first ATG in this frame. The 5' and 3' end-points of PRI1 mRNA have been determined by S1 mapping and primer extension analysis. The primary structure and the codon usage of PRI1 suggest that this essential gene is poorly expressed in yeast cells.