Gelsolin has three actin-binding sites

Gelsolin, a Ca2+-modulated actin filament-capping and -severing protein, complexes with two actin monomers. Studies designed to localize binding sites on proteolytic fragments identify three distinct actin-binding peptides. 14NT, a 14-kD fragment that contains the NH2 terminal, will depolymerize F-actin. This peptide forms a 1:1 complex with G-actin which blocks the exchange of etheno-ATP from bound actin. The estimated association and dissociation rates for this complex are 0.3 microM-1 s-1 and 1.35 x 10(-6) s-1 which gives a maximum calculated Kd = 4.5 x 10(-12) M. 26NT, the adjacent peptide on the NH2-terminal half of gelsolin, binds to both G- and F-actin. This fragment has little or no intrinsic severing activity and will bind to F-actin to nearly stoichiometric ratios. The interactions of 14NT and 26NT with actin are largely Ca2+ independent and one of these sites, probably 14NT, is the EGTA-stable site identified in the intact protein. 41CT, the COOH-terminal half of gelsolin, forms a rapidly reversible 1:1 complex with actin, Kd = 25 nM, that slows but does not block etheno-ATP exchange. This interaction is Ca2+ dependent and is the exchangeable site in the intact protein. One of these sites is hidden in the intact protein, but cleavage into half fragments exposes all three and removes the Ca2+ dependence of severing.     

Identification of a polyphosphoinositide-modulated domain in gelsolin which binds to the sides of actin filaments

Gelsolin is a Ca2+- and polyphosphoinositide-modulated actin-binding protein which severs actin filaments, nucleates actin assembly, and caps the "barbed" end of actin filaments. Proteolytic cleavage analysis of human plasma gelsolin has shown that the NH2-terminal half of the molecule severs actin filaments almost as effectively as native gelsolin in a Ca2+-insensitive but polyphosphoinositide-inhibited manner. Further proteolysis of the NH2-terminal half generates two unique fragments (CT14N and CT28N), which have minimal severing activity. Under physiological salt conditions, CT14N binds monomeric actin coupled to Sepharose but CT28N does not. In this paper, we show that CT28N binds stoichiometrically and with high affinity to actin subunits in filaments, suggesting that it preferentially recognizes the conformation of polymerized actin. Analysis of the binding data shows that actin filaments have one class of CT28N binding sites with Kd = 2.0 X 10(-7) M, which saturates at a CT28N/actin subunit ratio of 0.8. Binding of CT28N to actin filaments is inhibited by phosphatidylinositol 4,5-bisphosphate micelles. In contrast, neither CT14N nor another actin-binding domain located in the COOH-terminal half of gelsolin form stable stoichiometric complexes with actin along the filaments, and their binding to actin monomers is not inhibited by PIP2. Based on these observations, we propose that CT28N is the polyphosphoinositide-regulated actin-binding domain which allows gelsolin to bind to actin subunits within a filament before serving.     

Isolation and properties of two actin-binding domains in gelsolin

Gelsolin is a Ca2+-sensitive 90-kDa protein which regulates actin filament length. A molecular variant of gelsolin is present in plasma as a 93-kDa protein. Functional studies have shown that gelsolin contains two actin-binding sites which are distinct in that after Ca2+-mediated binding, removal of free Ca2+ releases actin from one site but not from the other. We have partially cleaved human plasma gelsolin with alpha-chymotrypsin and identified two distinct actin-binding domains. Peptides CT17 and CT15, which contain one of the actin-binding domains, bind to actin independently of Ca2+; peptides CT54 and CT47, which contain the other domain, bind to actin reversibly in response to changes in Ca2+ concentration. These peptides sequester actin monomers inhibiting polymerization. Unlike intact gelsolin, neither group of peptides nucleates actin assembly or forms stable filament end caps. CT17 and CT15 can however sever actin filaments. Amino acid sequence analyses place CT17 at the NH2 terminus of gelsolin and CT47 at the carboxyl-terminal two-thirds of gelsolin. Circular dichroism measurements show that Ca2+ induces an increase in the alpha-helical content of CT47. These studies provide a structural basis for understanding the interaction of gelsolin with actin and allow comparison with other Ca2+-dependent actin filament severing proteins.     

Kinetic analysis of F-actin depolymerization in the presence of platelet gelsolin and gelsolin-actin complexes

Platelet gelsolin (G), a 90,000-mol-wt protein, binds tightly to actin (A) and calcium at low ionic strength to form a 1:2:2 complex, GA2Ca2 (Bryan, J., and M. Kurth, 1984, J. Biol. Chem. 259:7480-7487). Chromatography of actin and gelsolin mixtures in EGTA-containing solutions isolates a stable binary complex, GA1Ca1 (Kurth, M., and J. Bryan, 1984, J. Biol. Chem. 259:7473-7479). The effects of platelet gelsolin and the binary gelsolin-actin complex on the depolymerization kinetics of rabbit skeletal muscle actin were studied by diluting pyrenyl F-actin into gelsolin or complex-containing buffers; a decrease in fluorescence represents disassembly of filaments. Dilution of F- actin to below the critical concentration required for filament assembly gave a biphasic depolymerization curve with both fast and slow components. Dilution into buffers containing gelsolin, as GCa2, increased the rate of depolymerization and gave a first order decay. The rate of decrease in fluorescence was found to be gelsolin concentration dependent. Electron microscopy of samples taken shortly after dilution into GCa2 showed a marked reduction in filament length consistent with filament severing and an increase in the number of ends. Conversely, occupancy of the EGTA-stable actin-binding site by an actin monomer eliminated the severing activity. Dilution of F-actin into the gelsolin-actin complex, either as GA1Ca1 or GA1Ca2, resulted in a decrease in the rate of depolymerization that was consistent with filament end capping. This result indicates that the EGTA-stable binding site is required and must be unoccupied for filament severing to occur. The effectiveness of gelsolin, GCa2, in causing filament depolymerization was dependent upon the ionic conditions: in KCI, actin filaments appeared to be more stable and less susceptible to gelsolin, whereas in Mg2+, actin filaments were more easily fragmented. Finally, a comparison of the number of kinetically active ends generated when filaments were diluted into gelsolin versus the number formed when gelsolin can function as a nucleation site suggests that gelsolin may sever more than once. The data are consistent with a mechanism where gelsolin, with both actin-binding sites unoccupied, can sever but not cap F-actin. Occupancy of the EGTA-stable binding site yields a gelsolin-actin complex that can no longer sever filaments, but can cap filament ends.     

The actin filament-severing domain of plasma gelsolin

Gelsolin, a multifunctional actin-modulating protein, has two actin-binding sites which may interact cooperatively. Native gelsolin requires micromolar Ca2+ for optimal binding of actin to both sites, and for expression of its actin filament-severing function. Recent work has shown that an NH2-terminal chymotryptic 17-kD fragment of human plasma gelsolin contains one of the actin-binding sites, and that this fragment binds to and severs actin filaments weakly irrespective of whether Ca2+ is present. The other binding site is Ca2+ sensitive, and is found in a chymotryptic peptide derived from the COOH-terminal two-thirds of plasma gelsolin; this fragment does not sever F-actin or accelerate the polymerization of actin. This paper documents that larger thermolysin-derived fragments encompassing the NH2-terminal half of gelsolin sever actin filaments as effectively as native plasma gelsolin, although in a Ca2+-insensitive manner. This result indicates that the NH2-terminal half of gelsolin is the actin-severing domain. The stringent Ca2+ requirement for actin severing found in intact gelsolin is not due to a direct effect of Ca2+ on the severing domain, but indirectly through an effect on domains in the COOH-terminal half of the molecule to allow exposure of both actin-binding sites.     

Ca2+ control of actin gelation. Interaction of gelsolin with actin filaments and regulation of actin gelation

We elucidated the mechanism by which gelsolin, a Ca2+-dependent regulatory protein from lung macrophages, controls the network structure of actin filaments. In the presence of micromolar Ca2+, gelsolin bound Ca2+. The Ca2+-gelsolin complex reduced the apparent viscosity and flow birefringence of F-actin and the lengths of actin filaments viewed in the electron microscope. However, concentrations of gelsolin causing these alterations did not effect proportionate changes in the turbidity of actin filament solutions or in the quantity of nonsedimentable actin as determined by a radioassay. From these findings, we conclude that gelsolin shortens actin filaments without net depolymerization. Such an effect on the distribution of actin filament lengths led to the prediction that low concentrations of gelsolin would increase the critical concentration of actin-binding protein required for incipient gelation of actin filaments in the presence of Ca2+, providing an efficient mechanism for controlling actin network structure. We verified the prediction experimentally, and we estimated that the Ca2+-gelsolin complex effectively breaks the bond between actin monomers in filaments with a stoichiometry of 1:1. The effect of Ca2+-gelsolin complex on actin solation was rapid, independent of temperature between 0 degrees and 37 degrees C, and reversed by reducing the free Ca2+ concentration.     

Comparison between the gelsolin and adseverin domain structure.

Adseverin (74-kDa protein, scinderin) is a calcium- and phospholipid-modulated actin-binding protein that promotes actin polymerization, severs actin filaments, and caps the barbed end of the actin filament, with its NH2-terminal half retaining these properties (Sakurai, T., Kurokawa, H., and Nonomura, Y. (1991) J. Biol. Chem. 266, 4581-4585). Further proteolysis of this NH2-terminal half generated five fragments, and two of them (Mr 15,000 and 31,000) showed Ca(2+)-dependent binding to monomeric actin. The Mr 31,000 fragment especially caused actin filament fragmentation, although its severing activity was also inhibited by several acidic phospholipids as was found in adseverin and its NH2-terminal half. Amino acid sequencing demonstrated that the two fragments' NH2 terminus were blocked in the same manner as the NH2 terminus of adseverin, and thus these two fragments are possibly located at the NH2-terminal of the adseverin molecule. This would then indicate that NH2-terminal fragments had a Ca(2+)-sensitive actin-binding function that relates to actin severing. The other two fragments' NH2-terminal sequencing showed a similar homology to the amino acid sequences of gelsolin and villin. Based on these observations, we propose that adseverin has a functional domain structure similar to that of the gelsolin and villin core.     

Capping and dynamic relation between domains 1 and 2 of gelsolin

Gelsolin is a protein that severs and caps actin filaments. The two activities are located in the N-terminal half of the gelsolin molecules. Severing and subsequent capping requires the binding of domains 2 and 3 (S2–3) to the side of the filaments to position the N-terminal domain 1 (S1) at the barbed end of actin (actin subdomains 1 and 3). The results provide a structural basis for the gelsolin capping mechanism. The effects of a synthetic peptide derived from the sequence of a binding site located in gelsolin S2 on actin properties have been studied. CD and IR spectra indicate that this peptide presented a secondary structure in solution which would be similar to that expected for the native full length gelsolin molecule. The binding of the synthetic peptide induces conformational changes in actin subdomain 1 and actin oligomerization. An increase in the polymerization rate was observed, which could be attributed to a nucleation kinetics effect. The combined effects of two gelsolin fragments, the synthetic peptide derived from an S2 sequence and the purified segment 1 (S1), were also investigated as a molecule model. The two fragments induced nucleation enhancement and inhibited actin depolymerization, two characteristic properties of capping. In conclusion, for the first time it is reported that the binding of a small synthetic fragment is sufficient to promote efficient capping by S1 at the barbed end of actin filaments. ©1998 European Peptide Society and John Wiley & Sons, Ltd.     

Polyphosphoinositide micelles and polyphosphoinositide-containing vesicles dissociate endogenous gelsolin-actin complexes and promote actin assembly from the fast-growing end of actin filaments blocked by gelsolin

The Ca2+-activated actin-binding protein gelsolin regulates actin filament length by severing preformed filaments and by binding actin monomers, stabilizing nuclei for their assembly into filaments. Gelsolin binds to phosphatidylinositol 4,5-bisphosphate (PIP2), with consequent inhibition of its filament severing activity and dissociation of EGTA-resistant complexes made with rabbit macrophage or human plasma gelsolin and rabbit muscle actin. This study provides evidence for an interaction of gelsolin with phosphatidylinositol monophosphate (PIP) as well as PIP2 and further describes their effects on gelsolin's function. Both phosphoinositides completely dissociate EGTA-insensitive rabbit macrophage cytoplasmic gelsolin-actin complexes and inhibit gelsolin's severing activity. The magnitude of inhibition depends strongly on the physical state of the phosphoinositides, being maximal in preparations that contain small micelles of either purified PIP or PIP2. Aggregation of PIP or PIP2 micelles by divalent cations or insufficient sonication or their incorporation into vesicles containing other phospholipids decreases but does not eliminate the inhibitory properties of the polyphosphoinositides. The presence of gelsolin partly inhibits the divalent cation-induced aggregation of PIP2 micelles. PIP2 in combination with EGTA inactivates gelsolin molecules that block the fast-growing end of actin filaments, thereby accelerating actin polymerization. Regulation of gelsolin by the intracellular messengers Ca2+ and polyphosphoinositides allows for the formation of several different gelsolin-actin intermediates with distinct functional properties that may be involved in changes in the state of cytoplasmic actin following cell stimulation.     

Purification of actin from fission yeast Schizosaccharomyces pombe and characterization of functional differences from muscle actin

Fission yeast Schizosaccharomyces pombe is an important genetic model organism for studying the mechanisms of endocytosis and cytokinesis. However, most work on the biochemical properties of fission yeast actin-binding proteins has been done with skeletal muscle actin for matters of convenience. When simulations of mathematical models of the mechanism of endocytosis were compared with events in live cells, some of the reactions appeared to be much faster than observed in biochemical experiments with muscle actin. Here, we used gelsolin affinity chromatography to purify actin from fission yeast. S. pombe actin shares many properties with skeletal muscle actin but has higher intrinsic nucleotide exchange rate, faster trimer nucleus formation, faster phosphate dissociation rate from polymerized actin, and faster nucleation of actin filaments with Arp2/3 complex. These properties close the gap between the biochemistry and predictions made by mathematical models of endocytosis in S. pombe cells.     

Gelsolin-actin interaction and actin polymerization in human neutrophils

The fraction of polymerized actin in human blood neutrophils increases after exposure to formyl-methionyl-leucyl-phenylalanine (fmlp), is maximal 10 s after peptide addition, and decreases after 300 s. Most of the gelsolin (85 +/- 11%) in resting ficoll-hypaque (FH)-purified neutrophils is in an EGTA resistant, 1:1 gelsolin-actin complex, and, within 5 s after 10(-7) M fmlp activation, the amount of gelsolin complexed with actin decreases to 42 +/- 12%. Reversal of gelsolin binding to actin occurs concurrently with an increase in F-actin content, and the appearance of barbed-end nucleating activity. The rate of dissociation of EGTA resistant, 1:1 gelsolin-actin complexes is more rapid in cells exposed to 10(-7) M fmlp than in cells exposed to 10(-9) M fmlp, and the extent of dissociation 10 s after activation depends upon the fmlp concentration. Furthermore, 300 s after fmlp activation when F-actin content is decreasing, gelsolin reassociates with actin as evidenced by an increase in the amount of EGTA resistant, 1:1 gelsolin-actin complex. Since fmlp induces barbed end actin polymerization in neutrophils and since in vitro the gelsolin-actin complex caps the barbed ends of actin filaments and blocks their growth, the data suggests that in FH neutrophils fmlp-induced actin polymerization could be initiated by the reversal of gelsolin binding to actin and the uncapping of actin filaments or nuclei. The data shows that formation and dissociation of gelsolin-actin complexes, together with the effects of other actin regulatory proteins, are important steps in the regulation of actin polymerization in neutrophils. Finally, finding increased amounts of gelsolin-actin complex in basal FH cells and dissociation of the complex in fmlp-activated cells suggests a mechanism by which fmlp can cause actin polymerization without an acute increase in cytosolic Ca++.     

Binding of phosphate to F-ADP-actin and role of F-ADP-Pi-actin in ATP-actin polymerization

Our previous work (Carlier, M.-F., and Pantaloni, D. (1986) Biochemistry 25, 7789-7792) had shown that F-ADP-Pi-actin is a major intermediate in ATP-actin polymerization, due to the slow rate of Pi release following ATP cleavage on filaments. To understand the mechanism of ATP-actin polymerization, we have prepared F-ADP-Pi-actin and characterized its kinetic parameters. 32Pi binds to F-ADP-actin with a stoichiometry of 1 mol/mol of F-actin subunit and an equilibrium dissociation constant Kpi of 1.5 mM at pH 7.0 Kpi increases with pH, indicating that the H2PO-4 species binds to F-actin. ADP-Pi-actin subunits dissociate much more slowly from filament ends than ADP-actin subunits; therefore, the stability of filaments in ATP is due to terminal ADP-Pi subunits. The slow rate of dissociation of ADP-Pi-actin also explains the decrease in critical concentration of ADP-actin in the presence of Pi reported by Rickard and Sheterline (Richard, J. E., and Sheterline, P. (1986) J. Mol. Biol. 191, 273-280). The effect of Pi on the rate of actin dissociation from filaments is much more pronounced at the barbed end than at the pointed end. Using gelsolin to block the barbed end, we have shown that the two ends are energetically different in the presence of ATP and saturating Pi, but less different than in the absence of Pi. The results are interpreted within a new model for actin polymerization. It is possible that phosphate binding to F-actin can regulate motile events in muscle and nonmuscle cells.     

Functional comparison of villin and gelsolin. Effects of Ca2+, KCl, and polyphosphoinositides

A family of homologous actin-binding proteins sever and cap actin filaments and accelerate actin filament assembly. The functions of two of these proteins, villin and gelsolin, and of their proteolytically derived actin binding domains were compared directly by measuring their effects, under various ionic conditions, on the rates and extents of polymerization of pyrene-labeled actin. In 1 mM Ca2+ and 150 mM KCl, villin and gelsolin have similar severing and polymerization-accelerating properties. Decreasing [Ca2+] to 25 microM greatly reduces severing by villin but not gelsolin. Decreasing [KCl] from 150 to 10 mM at 25 microM Ca2+ increases severing by villin, but not gelsolin, over 10-fold. The C-terminal half domains of both proteins have Ca2+-sensitive actin monomer-binding properties, but neither severs filaments nor accelerates polymerization. The N-terminal halves of villin and gelsolin contain all the filament-severing activity of the intact proteins. Severing by gelsolin's N-terminal half is Ca2+-independent, but that of villin has the same Ca2+ requirement as intact villin. The difference in Ca2+ sensitivity extends to 14-kDa N-terminal fragments which bind actin monomers and filament ends, requiring Ca2+ in the case of villin but not gelsolin. Severing of filaments by villin and its N-terminal half is shown to be inhibited by phosphatidylinositol 4,5-bisphosphate, as shown previously for gelsolin (Janmey, P.A., and Stossel, T.P. (1987) Nature 325, 362-364). The functional similarities of villin and gelsolin correlate with known structural features, and the greater functional dependence of villin on Ca2+ compared to gelsolin is traced to differences in their N-terminal domains.     

Dissecting the gelsolin-polyphosphoinositide interaction and engineering of a polyphosphoinositide-sensitive gelsolin C-terminal half protein

Gelsolin and other proteins in the villin/gelsolin family are regulated by polyphosphoinositides (PPIs), and manipulation of cellular PIP(2) levels alters the structure of the actin cytoskeleton coincident with the dissociation of gelsolin-actin complexes. This work explores the structure-function relationship of the gelsolin-PPI interaction. Circular dichroism experiments show that upon binding to PPIs, the PPI-sensitive N-terminal half of gelsolin undergoes significant secondary and tertiary structural changes that do not occur in the structurally homologous but PPI-insensitive C-terminal half. Secondary structure modeling algorithms predict an alpha-helical conformation for one of the gelsolin PPI-binding sites, P2, which differs from the conformation of P2 in the structure of gelsolin determined by X-ray crystallography, whereas structure prediction of the C-terminal homolog of P2 agrees well with the X-ray crystallography structure. Simulation of a change to helical conformation for P2 using molecular modeling indicates that such a structural transition will destabilize the F-actin-binding sites in domain 2. A hypothesis is proposed that PPIs initiate conformational changes at the PPI-binding site(s) that destabilize the protein structure, and subsequently disrupt the actin-binding sites. To further evaluate the role of P2 in the gelsolin-PPI interaction, a Ct mutant P2Ct is constructed by inserting P2 in place of its C-terminal homologous site. P2Ct interacts with actin in the same way as the wild-type protein. In contrast to Ct, however, P2Ct interacts strongly with PPIs, and its monomeric actin-binding activity becomes regulated by PPIs. It is concluded that the P2 site is sufficient for PPI-sensitivity in gelsolin. Furthermore, the P2 site in P2Ct and the actin-binding sites of Ct do not overlap, suggesting that PPIs regulate actin binding of P2Ct through induction of structural changes, rather than through direct competition.     

Domain structure in actin-binding proteins: expression and functional characterization of truncated severin

Severin from Dictyostelium discoideum is a Ca2(+)-activated actin-binding protein that severs actin filaments, nucleates actin assembly, and caps the fast growing ends of actin filaments. Sequence comparison with functionally related proteins, such as gelsolin, villin, or fragmin revealed highly conserved domains which are thought to be of functional significance. To attribute the different activities of the severin molecule to defined regions, progressively truncated severin polypeptides were constructed. The complete cDNA coding for 362 (DS362) amino acids and five 3' deletions coding for 277 (DS277), 177 (DS177), 151 (DS151), 117 (DS117), or 111 (DS111) amino acids were expressed in Escherichia coli. The proteins were purified to homogeneity and then characterized with respect to their effects on the polymerization or depolymerization kinetics of G- or F-actin solutions and their binding to G-actin. Furthermore, the Ca2+ binding of these proteins was investigated with a 45Ca-overlay assay and by monitoring Ca2(+)-dependent changes in tryptophan fluorescence. Bacterially expressed DS362 showed the same Ca2(+)-dependent activities as native severin. DS277, missing the 85 COOH-terminal amino acids of severin, had lost its strict Ca2+ regulation and displayed a Ca2(+)-independent capping activity, but was still Ca2+ dependent in its severing and nucleating activities. DS151 which corresponded to the first domain of gelsolin or villin had completely lost severing and nucleating properties. However, a residual severing activity of approximately 2% was detectable if 26 amino acids more were present at the COOH-terminal end (DS177). This locates similar to gelsolin the second actin-binding site to the border region between the first and second domain. Measuring the fluorescence enhancement of pyrene-labeled G-actin in the presence of DS111 showed that the first actin-binding site was present in the NH2-terminal 111 amino acids. Extension by six or more amino acids stabilized this actin-binding site in such a way that DS117 and even more pronounced DS151 became Ca2(+)-independent capping proteins. In comparison to many reports on gelsolin we draw the following conclusions. Among the three active actin-binding sites in gelsolin the closely neighboured sites one and two share the F-actin fragmenting function, whereas the actin-binding sites two and three, which are located in far distant domains, collaborate for nucleation. In contrast, severin contains two active actin-binding sites which are next to each other and are responsible for the severing as well as the nucleating function. The single actin-binding site near the NH2-terminus is sufficient for capping of actin filaments.     

The gelsolin:calponin complex nucleates actin filaments with distinct morphologies

Gelsolin and calponin are cytoskeletal and signalling proteins that form a tight 1:1 complex (GCC). We show that calponin within the GCC inhibits the rate of gelsolin mediated nucleation of actin polymerization. The actin-binding function of calponin is ablated within the GCC as the actin-binding site overlaps with one of the gelsolin binding sites. The structure of filaments that result from nucleation by GCC are different to those nucleated by gelsolin alone in that they are longer, loosely bundled and stain heterogeneously with phalloidin. GCC nucleated filaments appear contorted and wrap around each to form the loose bundles.     

Binding of gelsolin domain 2 to actin. An actin interface distinct from that of gelsolin domain 1 and from ADF/cofilin.

It is generally assumed that of the six domains that comprise gelsolin, domain 2 is primarily responsible for the initial contact with the actin filament that will ultimately result in the filament being severed. Other actin-binding regions within domains 1 and 4 are involved in gelsolin's severing and subsequent capping activity. The overall fold of all gelsolin repeated domains are similar to the actin depolymerizing factor (ADF)/cofilin family of actin-binding proteins and it has been proposed that there is a similarity in the actin-binding interface. Gelsolin domains 1 and 4 bind G-actin in a similar manner and compete with each other, whereas domain 2 binds F-actin at physiological salt concentrations, and does not compete with domain 1. Here we investigate the domain 2 : actin interface and compare this to our recent studies of the cofilin : actin interface. We conclude that important differences exist between the interfaces of actin with gelsolin domains 1 and 2, and with ADF/cofilin. We present a model for F-actin binding of domain 2 with respect to the F-actin severing and capping activity of the whole gelsolin molecule.     

Predominant induction of gelsolin and actin-binding protein during myeloid differentiation

Three actin-associated proteins, actin-binding protein, gelsolin, and profilin, influence gelation, solation, and polymerization, respectively, of actin in vitro. As assessed with specific cDNA probes and immunoaffinity reagents, a 7-50-fold increase in gelsolin, 3-5-fold increase in actin-binding protein, and less than 2-fold increases in actin and profilin protein and mRNA levels accompanied tetradecanoylphorbolacetate-induced differentiation of the myeloid cell lines U937 and HL60 into macrophage-like cells. Such induction in actin-binding protein or gelsolin did not occur in K562 cells, which respond minimally to tetradecanoylphorbolacetate, or following 1,25-dihydroxyvitamin D3-induced monocyte-like differentiation of U937, which results in a less motile phenotype. These observations suggest that increases in gelsolin and actin-binding protein are essential to the expression of many regulated motile functions which takes place during differentiation of myeloid cells.     

A direct interaction with calponin inhibits the actin-nucleating activity of gelsolin

Gelsolin and calponin are well-characterized cytoskeletal proteins that are abundant and widely expressed in vertebrate tissues. It is also becoming apparent, however, that they are involved in cell signalling. In the present study, we show that gelsolin and calponin interact directly to form a high-affinity (K(d)=16 nM) 1:1 complex, by the use of fluorescent probes attached to both proteins, by affinity chromatography and by immunoprecipitation. These methods show that gelsolin can form high-affinity complexes with two calponin isoforms (basic h1 and acidic h3). They also show that gelsolin binds calponin through regions that have been identified previously as being calponin's actin-binding sites. Moreover, gelsolin does not interact with calponin while calponin is bound to F-actin. Reciprocal experiments to find calponin-binding sites on gelsolin show that these are in both the N- and C-terminal halves of gelsolin. Calponin has minimal effects on actin severing by gelsolin. In contrast, calponin markedly affects the nucleation activity of gelsolin. The maximum inhibition of nucleation by gelsolin was 50%, which was achieved with a ratio of two calponins for every gelsolin. Thus the interaction of calponin with gelsolin may play a regulatory role in the formation of actin filaments through modulation of gelsolin's actin-binding function and through the prevention of calponin's actin-binding activities.