Cell Surface Display of Lipase in Pseudomonas putida KT2442 Using OprF as an Anchoring Motif and Its Biocatalytic Applications

We developed a new cell surface display system in Pseudomonas putida KT2442 using OprF, an outer membrane protein of Pseudomonas aeruginosa, as an anchoring motif in a C-terminal deletion-fusion strategy. The Pseudomonas fluorescens SIK W1 lipase gene was fused to two different C-terminal truncated OprF genes, and the fusion genes were cloned into the broad-host-range plasmid pBBR1MCS2 to make pMO164PL and pMO188PL. Plasmid pMO188PL allowed better display of lipase and thus was chosen for further study. The display of lipase on the surface of P. putida KT2442 was confirmed by Western blot analysis, immunofluorescence microscopy, and measurement of whole-cell lipase activity. The whole-cell lipase activity of recombinant P. putida KT2442 harboring pMO188PL was more than fivefold higher than that of recombinant Escherichia coli displaying lipase in the same manner. Cell surface-displayed lipase exhibited the highest activity at 47°C and pH 9.0, and the whole-cell lipase activity was greater than 90% of the initial activity in organic solvents at 47°C for 1 week. In a biocatalytic application, enantioselective resolution of 1-phenyl ethanol was carried out in an organic solvent. (R)-Phenyl ethyl acetate was successfully produced with 41.9% conversion and an enantiomeric excess of more than 99% in a 36-h reaction. These results suggest that the OprF anchor can be used for efficient display of proteins in P. putida KT2442 and consequently for various biocatalytic applications.     

Display of lipase on the cell surface of Escherichia coli using OprF as an anchor and its application to enantioselective resolution in organic solvent

We have developed a new cell surface display system using a major outer membrane protein of Pseudomonas aeruginosa OprF as an anchoring motif. Pseudomonas fluorescens SIK W1 lipase gene was fused to the truncated oprF gene by C-terminal deletion fusion strategy. The truncated OprF-lipase fusion protein was successfully displayed on the surface of Escherichia coli. Localization of the truncated OprF-lipase fusion protein was confirmed by western blot analysis, immunofluorescence microscopy, and whole-cell lipase activity. To examine the enzymatic characteristics of the cell surface displayed lipase, the whole-cell enzyme activity and stability were determined under various conditions. Cell surface displayed lipase showed the highest activity at 37 degrees C and pH 8.0. It retained over 80% of initial activity after incubation for a week in both aqueous solution and organic solvent. When the E. coli cells displaying lipases were used for enantioselective resolution of racemic 1-phenylethanol in hexane, (R)-phenyl ethyl acetate was successfully obtained with the enantiomeric excess of greater than 96% in 36 h of reaction. These results suggest that E. coli cells displaying lipases using OprF as an anchoring motif can be employed for various biotechnological applications both in aqueous and nonaqueous phases.     

Genetic engineering of Pseudomonas putida KT2442 for biotransformation of aromatic compounds to chiral cis-diols

Toluene dioxygenase (TDO) catalyzes asymmetric cis-dihydroxylations of aromatic compounds. Pseudomonas putida KT2442 (pSPM01) harboring TDO genes could effectively biotransform a wide-range of aromatic substrates into their cis-diols products. In shake-flask culture, approximately 2.7gl(-1) benzene cis-diols, 8.8gl(-1) toluene cis-diols and 6.0gl(-1) chlorobenzene cis-diols were obtained from the biotransformation process. Furthermore, vgb gene encoding Vitreoscilla hemoglobin protein (VHb) which enhances oxygen microbial utilization rate under low dissolved oxygen concentration was integrated into P. putida KT2442 genome. The oxidation ability of the mutant strain P. putida KTOY02 (pSPM01) harboring TDO gene was increased in the presence of VHb protein. As a result, approximately 3.8, 15.1 or 6.8gl(-1) different cis-diols production was achieved in P. putida KTOY02 (pSPM01) grown in shake-flasks when benzene, toluene or chlorobenzene was used as the substrate. The above results indicate that P. putida KT2442 could be used as a cell factory to biotransform aromatic compounds.     

Microbial production of medium-chain-length 3-hydroxyalkanoic acids by recombinant Pseudomonas putida KT2442 harboring genes fadL, fadD and phaZ

Monomers of microbial polyhydroxyalkanoates, mainly 3-hydroxyhexanoic acid (3HHx) and 3-hydroxyoctanoic acid (3HO), were produced by overexpressing polyhydroxyalkanoates depolymerase gene phaZ, together with putative long-chain fatty acid transport protein fadL of Pseudomonas putida KT2442 and acyl-CoA synthetase (fadD) of Escherichia coli MG1655 in P. putida KT2442. FadL(Pp), which is responsible for free fatty acid transportation from the extracellular environment to the cytoplasm, and FadD(Ec), which activates fatty acid to acyl-CoA, jointly reinforce the fatty acid beta-oxidation pathway. Pseudomonas putida KT2442 (pYZPst01) harboring polyhydroxyalkanoates depolymerase gene phaZ of Pseudomonas stutzeri 1317 produced 1.37 g L(-1) extracellular 3HHx and 3HO in shake flask studies after 48 h in the presence of sodium octanoate as a sole carbon source, while P. putida KT2442 (pYZPst06) harboring phaZ(Pst), fadD(Ec) and fadL(Pp) achieved 2.32 g L(-1) extracellular 3HHx and 3HO monomer production under the same conditions. In a 48-h fed-batch fermentation process conducted in a 6-L fermentor with 3 L sodium octanoate mineral medium, 5.8 g L(-1) extracellular 3HHx and 3HO were obtained in the fermentation broth. This is the first time that medium-chain-length 3-hydroxyalkanoic acids (mcl-3HA) were produced using fadL(Pp) and fadD(Ec) genes combined with the polyhydroxyalkanoates depolymerase gene phaZ.     

Production of polyhydroxyalkanoates with high 3-hydroxydodecanoate monomer content by fadB and fadA knockout mutant of Pseudomonas putida KT2442

Pseudomonas putida KT2442 produces medium-chain-length (MCL) polyhydroxyalkanoates (PHA) consisting of 3-hydroxyhexanoate (HHx), 3-hydroxyoctanoate (HO), 3-hydroxydecanoate (HD), and 3-hydroxydodecanoate (HDD) from a wide-range of carbon sources. In this study, fadA and fadB genes encoding 3-ketoacyl-CoA thiolase and 3-hydroxyacyl-CoA dehydrogenase in P. putida KT2442 were knocked out to weaken the beta-oxidation pathway. Two-step culture was proven as the optimal method for PHA production in the mutant termed P. putida KTOY06. In a shake-flask culture, when dodecanoate was used as a carbon source, P. putida KTOY06 accumulated 84 wt % PHA, much higher than 50 wt % PHA in its wild type KT2442. The PHA monomer composition was completely different: the HDD fraction in PHA produced by KTOY06 was 41 mol %, much higher compared with 7.5 mol % only in KT2442. The fermentor-scale culture indicated the HDD fraction in PHA decreased during the culture time from 35 to 25 mol % in a one-step fermentation process or from 75 to 49 mol % in a two-step fermentation process. It is for the first time that PHA with a dominant HDD fraction was produced. Thermal and mechanical properties assays indicated that this new type PHA with a high HDD fraction had higher crystallinity and tensile strength than PHA with a low HDD fraction did, demonstrating an improved application property.     

Metabolic engineering of Pseudomonas putida for the utilization of parathion as a carbon and energy source

Pseudomonas putida KT2442 was engineered to use the organophosphate pesticide parathion, a compound similar to other organophosphate pesticides and chemical warfare agents, as a source of carbon and energy. The initial step in the engineered degradation pathway was parathion hydrolysis by organophosphate hydrolase (OPH) to p-nitrophenol (PNP) and diethyl thiophosphate, compounds that cannot be metabolized by P. putida KT2442. The gene encoding the native OPH (opd), with and without the secretory leader sequence, was cloned into broad-host-range plasmids under the control of tac and taclac promoters. Expression of opd from the tac promoter resulted in high OPH activity, whereas expression from the taclac promoter resulted in low activity. A plasmid-harboring operons encoding enzymes for p-nitrophenol transformation to beta-ketoadipate was transformed into P. putida allowing the organism to use 0.5 mM PNP as a carbon and energy source. Transformation of P. putida with the plasmids harboring opd and the PNP operons allowed the organism to utilize 0.8 mM parathion as a source of carbon and energy. Degradation studies showed that parathion formed a separate dense, non-aqueous phase liquid phase but was still bioavailable.     

Use of bioluminescence for monitoring the viability of individual Pseudomonas putida KT2442 cells

Exponential phase cells of Pseudomonas putida KT2442 rapidly lost viability when incubated at 0°C without entering a viable but non-culturable state. The majority of dead cells retained their cellular integrity and contained DNA. However, their cellular rRNA content was substantially reduced. By employing a luciferase-marked derivative of P. putida KT2442 in combination with a highly sensitive low-light imaging system, live and dead cells could be distinguished.     

Response of Pseudomonas putida KT2440 to increased NADH and ATP demand

Adenosine phosphate and NAD cofactors play a vital role in the operation of cell metabolism, and their levels and ratios are carefully regulated in tight ranges. Perturbations of the consumption of these metabolites might have a great impact on cell metabolism and physiology. Here, we investigated the impact of increased ATP hydrolysis and NADH oxidation rates on the metabolism of Pseudomonas putida KT2440 by titration of 2,4-dinitrophenol (DNP) and overproduction of a water-forming NADH oxidase, respectively. Both perturbations resulted in a reduction of the biomass yield and, as a consequence of the uncoupling of catabolic and anabolic activities, in an amplification of the net NADH regeneration rate. However, a stimulation of the specific carbon uptake rate was observed only when P. putida was challenged with very high 2,4-dinitrophenol concentrations and was comparatively unaffected by recombinant NADH oxidase activity. This behavior contrasts with the comparably sensitive performance described, for example, for Escherichia coli or Saccharomyces cerevisiae. The apparent robustness of P. putida metabolism indicates that it possesses a certain buffering capacity and a high flexibility to adapt to and counteract different stresses without showing a distinct phenotype. These findings are important, e.g., for the development of whole-cell redox biocatalytic processes that impose equivalent burdens on the cell metabolism: stoichiometric consumption of (reduced) redox cofactors and increased energy expenditures, due to the toxicity of the biocatalytic compounds.     

Effects of the inoculant strain Pseudomonas putida KT2442 (pNF142) and of naphthalene contamination on the soil bacterial community

The naphthalene-degrading activity of a Pseudomonas sp. strain isolated from a creosote-contaminated soil was shown to be encoded by the IncP9 plasmid pNF142 by transfer to Pseudomonas putida KT2442. The effects of the inoculant strain KT2442 (pNF142) and of naphthalene contamination on the soil bacterial community were studied in microcosms with the following treatments: (I) soil, (II) soil with naphthalene, (III) soil with naphthalene and inoculated with KT2442 (pNF142). The inoculant became the dominant bacterial population in treatment (III) as evidenced by cultivation and denaturing gradient gel electrophoresis (DGGE) analysis. The bacterial DGGE profiles revealed drastically reduced complexity due to the numerical dominance of the inoculant. However, group-specific fingerprints (beta-proteobacteria, actinobacteria) that excluded KT2442 (pNF142) showed less severe changes in the bacterial community patterns. A major effect of naphthalene on the soil bacterial community was observed in treatment (II) after 21 days. Two dominant bands appeared whose sequences showed the highest similarity to those of Burkholderia sp. RP007 and Nocardia vinaceae based on 16S rRNA gene sequencing. These bands were less intense in treatment (III). The increased abundance of RP007-like populations due to naphthalene contamination was also confirmed by PCR amplification of the phnAc gene. The nahAc and nahH genes were detected in DNA and cDNA only in treatment III. Although the inoculant strain KT2442 (pNF142) showed good survival and expression of genes involved in naphthalene degradation, this study suggests that KT2442 (pNF142) suppressed the enrichment of indigenous naphthalene degraders.     

Evidence for plasmid-mediated chemotaxis of Pseudomonas putida towards naphthalene and salicylate

A naphthalene (Nap) and salicylate (Sal) degrading microorganism, Pseudomonas putida RKJ1, is chemotactic towards these compounds. This strain carries a 83 kb plasmid. A 25 kb EcoRI fragment of the plasmid contains the genes responsible for Nap degradation through Sal. RKJ5, the plasmid-cured derivative of RKJ1, is neither capable of degradation nor is chemotactic towards Nap or Sal. The recombinant plasmid pRKJ3, which contained a 25 kb EcoRI fragment, was transferred back into the plasmid-free wild-type strain RKJ5, and the transconjugant showed both degradation and chemotaxis. The recombinant plasmid pRKJ3 was also transferred into motile, plasmid-free P. putida KT2442. The resulting transconjugant (RKJ15) showed chemotaxis towards both Nap and Sal. Two mutant strains carrying deletions in pRKJ3 (in KT2442) with phenotypes Nap- Sal+ and Nap- Sal-, were also tested for chemotaxis. It was found that the Nap- Sal+ mutant strain showed chemotaxis towards Sal only, whereas the Nap- Sal- mutant strain is non-chemotactic towards both the compounds. These results suggest that the metabolism of Nap and Sal may be required for the chemotactic activity.     

The construction and monitoring of genetically marked, plasmid-containing, naphthalene-degrading strains in soil

A genetically marked, plasmid-containing, naphthalene-degrading strain, Pseudomonas putida KT2442(pNF142::TnMod-OTc), has been constructed. The presence of the gfp gene (which codes for green fluorescent protein) and the kanamycin and rifampicin resistance genes in the chromosome of this strain allows the strain's fate in model soil systems to be monitored, whereas a minitransposon, built in naphthalene biodegradation plasmid pNF142, contains the tetracycline resistance gene and makes it possible to follow the horizontal transfer of this plasmid between various bacteria. Plasmid pNF142::TnMod-OTc is stable in strain P. putida KT2442 under nonselective conditions. The maximal specific growth rate of this strain on naphthalene was found to be higher than that of the natural host of plasmid pNF142. When introduced into a model soil system, the genetically marked strain is stable and competitive for 40 days. The transfer of marked plasmid pNF142::TnMod-OTc to natural soil bacteria, predominantly fluorescent pseudomonads, has been detected.     

Molecular characterization of the gallate dioxygenase from Pseudomonas putida KT2440. The prototype of a new subgroup of extradiol dioxygenases

In this work we have characterized the galA gene product from Pseudomonas putida KT2440, a ring-cleavage dioxygenase that acts specifically on gallate to produce 4-oxalomesaconate. The protein is a trimer composed by three identical subunits of 47.6 kDa (419 amino acids) that uses Fe2+ as the main cofactor. The gallate dioxygenase showed maximum activity at pH 7.0, and the Km and Vmax values for gallate were 144 microM and 53.2 micromol/min/mg of protein, respectively. A phylogenetic study suggests that the gallate dioxygenase from P. putida KT2440 is the prototype of a new subgroup of type II extradiol dioxygenases that share a common ancestor with protocatechuate 4,5-dioxygenases and whose two-domain architecture might have evolved from the fusion of the large and small subunits of the latter. A three-dimensional model for the N-terminal domain (residues 1-281) and C-terminal domain (residues 294-420) of the gallate dioxygenase from P. putida KT2440 was generated by comparison with the crystal structures of the large (LigB) and small (LigA) subunits of the protocatechuate 4,5-dioxygenase from Sphingomonas paucimobilis SYK-6. The expression of the galA gene was specifically induced when P. putida KT2440 cells grew in the presence of gallate. A P. putida KT2440 galA mutant strain was unable to use gallate as the sole carbon source and it did not show gallate dioxygenase activity, suggesting that the GalA protein is the only dioxygenase involved in gallate cleavage in this bacterium. This work points to the existence of a new pathway that is devoted to the catabolism of gallic acid and that remained unknown in the paradigmatic P. putida KT2440 strain.     

Proline catabolism by Pseudomonas putida: cloning, characterization, and expression of the put genes in the presence of root exudates

Pseudomonas putida KT2442 is a root-colonizing strain which can use proline, one of the major components in root exudates, as its sole carbon and nitrogen source. A P. putida mutant unable to grow with proline as the sole carbon and nitrogen source was isolated after random mini-Tn5-Km mutagenesis. The mini-Tn5 insertion was located at the putA gene, which is adjacent to and divergent from the putP gene. The putA gene codes for a protein of 1,315 amino acid residues which is homologous to the PutA protein of Escherichia coli, Salmonella enterica serovar Typhimurium, Rhodobacter capsulatus, and several Rhizobium strains. The central part of P. putida PutA showed homology to the proline dehydrogenase of Saccharomyces cerevisiae and Drosophila melanogaster, whereas the C-terminal end was homologous to the pyrroline-5-carboxylate dehydrogenase of S. cerevisiae and a number of aldehyde dehydrogenases. This suggests that in P. putida, both enzymatic steps for proline conversion to glutamic acid are catalyzed by a single polypeptide. The putP gene was homologous to the putP genes of several prokaryotic microorganisms, and its gene product is an integral inner-membrane protein involved in the uptake of proline. The expression of both genes was induced by proline added in the culture medium and was regulated by PutA. In a P. putida putA-deficient background, expression of both putA and putP genes was maximal and proline independent. Corn root exudates collected during 7 days also strongly induced the P. putida put genes, as determined by using fusions of the put promoters to 'lacZ. The induction ratio for the putA promoter (about 20-fold) was 6-fold higher than the induction ratio for the putP promoter.     

Cell surface display of organophosphorus hydrolase in Pseudomonas putida using an ice-nucleation protein anchor

A surface anchor system derived from the ice-nucleation protein (INP) from Pseudomonas syringe was used to localize organophosphorus hydrolase (OPH) onto the surface of Pseudomonas putida KT2440. Cells harboring the shuttle vector pPNCO33 coding for the INP-OPH fusion were capable of targeting OPH onto the cell surface as demonstrated by whole cell ELISA. The whole cell activity of P. putida KT2440 was shown to be 10 times higher than those of previous efforts expressing the same fusion protein in Escherichia coli. The capability of expressing enzymes on the surface of a robust and environmentally benign P. putida KT2440 should open up new avenues for a wide range of applications such as in situ bioremediation.     

Responses to nutrient starvation in Pseudomonas putida KT2442: analysis of general cross-protection, cell shape, and macromolecular content.

The physiology of Pseudomonas putida KT2442 with respect to growth and carbon starvation was studied. During the transition from growth to nongrowth, the cell shape changes from cylindrical to spheric, a change which is accompanied by reductions in cell size, DNA and ribosome content, and the rate of total protein synthesis. In addition, a pattern of general cross-protection develops, which enables the cells to survive environmental stresses such as high and low temperatures, elevated osmolarity, solvents, and oxidative agents. Cultures are almost fully viable during 1 month of carbon, nitrogen, and multiple-nutrient starvation and are considered to be in an active nondormant state. In contrast, strain KT2442 does not survive well under conditions of sulfate and phosphate starvation.     

Horizontal transfer of catabolic plasmids in the process of naphthalene biodegradation in model soil systems

The process of naphthalene degradation by indigenous, introduced, and transconjugant strains was studied in laboratory soil microcosms. Conjugation transfer of catabolic plasmids was demonstrated in naphthalene-contaminated soil. Both indigenous microorganisms and an introduced laboratory strain BS394 (pNF142::TnMod-OTc) served as donors of these plasmids. The indigenous bacterial degraders of naphthalene isolated from soil were identified as Pseudomonas putida and Pseudomonas fluorescens. The frequency of plasmid transfer in soil was 10(-5)-10(-4) per donor cell. The activity of the key enzymes of naphthalene biodegradation in indigenous and transconjugant strains was studied. Transconjugant strains harboring indigenous catabolic plasmids possessed high salicylate hydroxylase and low catechol-2,3-dioxygenase activities, in contrast to indigenous degraders, which had a high level of catechol-2,3-dioxygenase activity and a low level of salicylate hydroxylase. Naphthalene degradation in batch culture in liquid mineral medium was shown to accelerate due to cooperation of the indigenous naphthalene degrader P. fluorescens AP1 and the transconjugant strain P. putida KT2442 harboring the indigenous catabolic plasmid pAP35. The role of conjugative transfer of naphthalene biodegradation plasmids in acceleration of naphthalene degradation was demonstrated in laboratory soil microcosms.     

Inactivation of isocitrate lyase leads to increased production of medium-chain-length poly(3-hydroxyalkanoates) in Pseudomonas putida

Medium-chain-length (mcl) poly(3-hydroxyalkanoates) (PHAs) are storage polymers that are produced from various substrates and accumulate in Pseudomonas strains belonging to rRNA homology group I. In experiments aimed at increasing PHA production in Pseudomonas strains, we generated an mcl PHA-overproducing mutant of Pseudomonas putida KT2442 by transposon mutagenesis, in which the aceA gene was knocked out. This mutation inactivated the glyoxylate shunt and reduced the in vitro activity of isocitrate dehydrogenase, a rate-limiting enzyme of the citric acid cycle. The genotype of the mutant was confirmed by DNA sequencing, and the phenotype was confirmed by biochemical experiments. The aceA mutant was not able to grow on acetate as a sole carbon source due to disruption of the glyoxylate bypass and exhibited two- to fivefold lower isocitrate dehydrogenase activity than the wild type. During growth on gluconate, the difference between the mean PHA accumulation in the mutant and the mean PHA accumulation in the wild-type strain was 52%, which resulted in a significant increase in the amount of mcl PHA at the end of the exponential phase in the mutant P. putida KT217. On the basis of a stoichiometric flux analysis we predicted that knockout of the glyoxylate pathway in addition to reduced flux through isocitrate dehydrogenase should lead to increased flux into the fatty acid synthesis pathway. Therefore, enhanced carbon flow towards the fatty acid synthesis pathway increased the amount of mcl PHA that could be accumulated by the mutant.     

Biosynthesis of poly(3-hydroxydecanoate) and 3-hydroxydodecanoate dominating polyhydroxyalkanoates by β-oxidation pathway inhibited Pseudomonas putida

Pseudomonas putida KT2442 produces medium-chain-length polyhydroxyalkanoates consisting of 3-hydroxyhexanoate (3HHx), 3-hydroxyoctanoate (3HO), 3-hydroxydecanoate (3HD), 3-hydroxydodecanoate (3HDD) and 3-hydroxytetradecanoate (3HTD) from relevant fatty acids. P. puitda KT2442 was found to contain key fatty acid degradation enzymes encoded by genes PP2136, PP2137 (fadB and fadA) and PP2214, PP2215 (fadB2x and fadAx), respectively. In this study, the above enzymes and other important fatty acid degradation enzymes, including 3-hydroxyacyl-CoA dehydrogenase and acyl-CoA dehydrogenase encoded by genes PP2047 and PP2048, respectively, were studied for their effects on PHA structures. Mutant P. puitda KTQQ20 was constructed by knocking out the above six genes and also 3-hydroxyacyl-CoA-acyl carrier protein transferase encoded by PhaG, leading to a significant reduction of fatty acid β-oxidation activity. Therefore, P. puitda KTQQ20 synthesized homopolymer poly-3-hydroxydecanoate (PHD) or P(3HD-co-84mol% 3HDD), when grown on decanoic acid or dodecanoic acid. Melting temperatures of PHD and P(3HD-co-84mol% 3HDD) were 72 and 78 °C, respectively. Thermal and mechanical properties of PHD and P(3HD-co-84mol% 3HDD) were much better as compared with an mcl-PHA, consisting of lower content of C10 or C12 monomers. For the first time, it was shown that homopolymer PHD and 3HDD monomers dominating PHA could be synthesized by β-oxidation inhibiting P. putida grown on relevant carbon sources.