The 3��-Flap Pocket of Human Flap Endonuclease 1 Is Critical for Substrate Binding and Catalysis

Flap endonuclease 1 (FEN1) proteins, which are present in all kingdoms of life, catalyze the sequence-independent hydrolysis of the bifurcated nucleic acid intermediates formed during DNA replication and repair. How FEN1s have evolved to preferentially cleave flap structures is of great interest especially in light of studies wherein mice carrying a catalytically deficient FEN1 were predisposed to cancer. Structural studies of FEN1s from phage to human have shown that, although they share similar folds, the FEN1s of higher organisms contain a 3′-extrahelical nucleotide (3′-flap) binding pocket. When presented with 5′-flap substrates having a 3′-flap, archaeal and eukaryotic FEN1s display enhanced reaction rates and cleavage site specificity. To investigate the role of this interaction, a kinetic study of human FEN1 (hFEN1) employing well defined DNA substrates was conducted. The presence of a 3′-flap on substrates reduced K_m and increased multiple- and single turnover rates of endonucleolytic hydrolysis at near physiological salt concentrations. Exonucleolytic and fork-gap-endonucleolytic reactions were also stimulated by the presence of a 3′-flap, and the absence of a 3′-flap from a 5′-flap substrate was more detrimental to hFEN1 activity than removal of the 5′-flap or introduction of a hairpin into the 5′-flap structure. hFEN1 reactions were predominantly rate-limited by product release regardless of the presence or absence of a 3′-flap. Furthermore, the identity of the stable enzyme product species was deduced from inhibition studies to be the 5′-phosphorylated product. Together the results indicate that the presence of a 3′-flap is the critical feature for efficient hFEN1 substrate recognition and catalysis.In eukaryotic DNA replication and repair, various bifurcated nucleic acid structure intermediates are formed and must be processed by the appropriate nuclease. Two examples of biological processes that create bifurcated DNA intermediates are Okazaki fragment maturation (1, 2) and long patch excision repair (3). In both models, a polymerase executes strand-displacement synthesis to create a double-stranded DNA (dsDNA)⁶ two-way junction from which a 5′-flap structure protrudes. The penultimate step of both pathways is the cleavage of this flap structure to create a nicked DNA that is then ligated. Because the bifurcated DNA structures that are formed in the aforementioned processes can theoretically occur anywhere in the genome, the nuclease associated with the cleavage of 5′-flap structures in eukaryotic cells, which is called flap endonuclease 1 (FEN1), must be capable of cleavage regardless of sequence. Therefore, FEN1 nucleases, which are found in all kingdoms of life (4), have evolved to recognize substrates based upon nucleic acid structure and strand polarity (5, 6).The Okazaki fragment maturation pathway of yeast has become a paradigm of eukaryotic lagging strand DNA synthesis. In the yeast model, bifurcated intermediates with large single-stranded DNA (ssDNA) 5′-flap structures are imprecisely cleaved by DNA2 in a replication protein A -dependent manner (7). Subsequent to the DNA2 cleavage, Rad27 (yeast homologue of FEN1) cleaves precisely to generate an intermediate suitable for ligation (2). The recent discovery that human DNA2 is predominantly located in mitochondria in various human cell lines (8, 9) suggests that hFEN1 is the paramount 5′-flap endonuclease in the nuclei of human cells. This observation potentially provides a plausible rationale for why deletion of RAD27 (yeast FEN1 homologue) is tolerated in Saccharomyces cerevisiae (10), whereas deletion of FEN1 in mammals is embryonically lethal (11). Recent models wherein mice carrying a mutation (E160D) in the FEN1 gene, which was shown in vitro to alter enzymatic properties (12), have demonstrated that FEN1 functional deficiency in mice (S129 and Black 6) increases the incidence of cancer, albeit different types presumably due to genetic background (13, 14). Thus, the function of mammalian FEN1 in vivo is vital to the prevention of genomic instability. In addition to its importance in the nucleus, hFEN1 has recently been detected in mitochondrial extracts (15, 16) and implicated in mitochondrial long patch base excision repair (15). Considering the pivotal roles of hFEN1 in DNA replication and repair, it is of interest to understand how hFEN1 and homologues achieve substrate and scissile phosphate selectivity in the absence of sequence information.Since its initial discovery as a nuclease that completes reconstituted Okazaki fragment maturation (17) and subsequent rediscovery as a 5′-flap-specific nuclease (DNaseIV) from bacteria (18), mouse (19), and HeLa cells (20), FEN1 proteins ranging from phage to human have been studied biochemically, computationally, and structurally (5, 6, 21). Biochemical characterizations of FEN1 proteins from various organisms have shown that this family of nucleases can perform phosphodiesterase activity on a wide variety of substrates; however, the efficiency of catalysis on various substrates differs among the species. For instance, phage FEN1s prefer pseudo-Y substrates (22, 23), whereas the archaeal and eukaryotic FEN1s prefer 5′-flap substrates (21, 24, 25), which have two dsDNA domains, one upstream and downstream of the site of cleavage, and a 5′-ssDNA protrusion (Fig. 1A). Primary sequence analysis indicates that FEN1 proteins share characteristic N-terminal (N) and Intermediate (I) “domains,” which harbor the highly conserved carboxylate residues that bind the requisite divalent metal ions (26–28). Structural studies of FEN1 nucleases from phage to humans (22, 29–36), have shown that the N and I domains comprise a single nuclease core domain consisting of a mixed, six- or seven-stranded β-sheet packed against an α-helical structure on both sides. The α-helices on either side of the β-sheet are “bridged” by a helical arch that spans the active site groove (supplemental Fig. S1). On one side of the β-sheet, the α-helical bundle (αb1) creates the floor of the active site and a DNA binding motif (helix-3-turn-helix) (32). Similarly, the opposite α-helical bundle (αb2) has also been observed to interact with DNA (35). Based on site-directed mutagenesis studies with T5 phage FEN1 (T5FEN1) (37) and hFEN1 (38, 39), and crystallographic studies of T4 phage FEN1 (T4FEN1) (22) and Archaeoglobus fulgidus FEN1 (aFEN1) (35) in complex with DNA, a general model for how FEN1 proteins recognize flap DNA has emerged. The helix-3-turn-helix motif is involved in downstream dsDNA binding, whereas the upstream dsDNA domain is bound by αb2. The helical arch is likely involved in 5′-flap binding (22).Open in a separate windowFIGURE 1.Secondary structure schematics of hFEN1 substrates. A, illustration of a general flap substrate created using a bimolecular approach whereby a template strand (T-strand), which partially folds into a hairpin, anneals with the duplex strand (d-strand). The T-strand hairpin creates the upstream dsDNA domain, whereas the d-strand base pairs with the T-strand to create the downstream dsDNA domain. The flap or any other structure is created by addition of nucleotides to the 5′-end of the d-strand. The interface between the upstream and downstream dsDNA domains may be viewed as a derivative of a two-way junction (74). Annealing of either the F(5), E, or G(15) d-strands with the T3F T-strand results in the formation of a (B) double flap substrate (Flap of 5-nt d-strand paired with a Template with a 3′-Flap, F(5)·T3F), C, exonuclease substrate with a 3′-extrahelical nucleotide (EXO d-strand paired with a Template with a 3′-Flap, E·T3F), and a D, fork-GEN substrate with a 3′-extrahelical nucleotide and a 15-nt ssDNA gap capped by a 23-nt hairpin structure (fork-Gap of 15-nt d-strand paired with a Template with a 3′-Flap, G(15)·T3F). E, annealing the F(5) d-strand with the T oligonucleotide creates a single flap (Flap of 5-nt d-strand paired with a Template, F(5)·T).Unlike phage FEN1s, studies of FEN1s from eubacterial (40), archaeal (21), and eukaryotic origins (41) have shown that the addition of a 3′-extrahelical nucleotide (3′-flap) to the upstream duplex of a 5′-flap substrate results in a rate enhancement and an increase in cleavage site specificity. Moreover, substrates possessing a 3′-flap, which mimic physiological “equilibrating flaps,” were cleaved exactly one nucleotide into the downstream duplex, thereby resulting in 5′-phosphorylated dsDNA product that was a suitable substrate for DNA ligase I (21, 41). As postulated by Kaiser et al. (21), the structure of an archaeal FEN1 in complex with dsDNA with a 3′-overhang showed that the protein contains a cleft adjacent to the upstream dsDNA binding site that binds the 3′-flap by means of van der Waals and hydrogen bonding interactions with the sugar moiety (35). Once the residues associated with 3′-flap binding were identified, sequence alignment analyses showed that the amino acid residues in the 3′-flap binding pocket are highly conserved from archaea to human. Furthermore, mutation of the conserved amino acid residues in the 3′-flap binding pocket of hFEN1 resulted in reduced affinity for and cleavage specificity on double flap substrates (42). Although the effects of the addition of a 3′-flap to substrates on hFEN1 catalysis are known qualitatively, a detailed understanding of the relationship between changes in catalytic parameters and rate enhancement by the presence of a 3′-flap is unknown. Here, we describe a detailed kinetic analysis of hFEN1 using four well characterized DNA substrates and show that the presence of a 3′-flap on a substrate not only contributes to substrate binding (42), but also increases multiple and single turnover rates of reaction in the presence of near physiological monovalent salt concentrations. We also demonstrate that, like T5FEN1, hFEN1 is rate-limited by product release, and thus multiple turnover rates at saturating concentrations of substrate are predominantly a reflection of product release and not catalysis as was previously concluded (39). Furthermore, this study provides insight into the mechanism of hFEN1 substrate recognition.     

FANCI Protein Binds to DNA and Interacts with FANCD2 to Recognize Branched Structures

In this study, we report that the purified wild-type FANCI (Fanconi anemia complementation group I) protein directly binds to a variety of DNA substrates. The DNA binding domain roughly encompasses residues 200–1000, as suggested by the truncation study. When co-expressed in insect cells, a small fraction of FANCI forms a stable complex with FANCD2 (Fanconi anemia complementation group D2). Intriguingly, the purified FANCI-FANCD2 complex preferentially binds to the branched DNA structures when compared with either FANCI or FANCD2 alone. Co-immunoprecipitation with purified proteins indicates that FANCI interacts with FANCD2 through its C-terminal amino acid 1001–1328 fragment. Although the C terminus of FANCI is dispensable for direct DNA binding, it seems to be involved in the regulation of DNA binding activity. This notion is further enhanced by two C-terminal point mutations, R1285Q and D1301A, which showed differentiated DNA binding activity. We also demonstrate that FANCI forms discrete nuclear foci in HeLa cells in the absence or presence of exogenous DNA damage. The FANCI foci are colocalized perfectly with FANCD2 and partially with proliferating cell nuclear antigen irrespective of mitomycin C treatment. An increased number of FANCI foci form and become resistant to Triton X extraction in response to mitomycin C treatment. Our data suggest that the FANCI-FANCD2 complex may participate in repair of damaged replication forks through its preferential recognition of branched structures.Fanconi anemia (FA)³ is a genetic disorder characterized by chromosome instability, predisposition to cancer, hypersensitivity to DNA cross-linking agents, developmental abnormalities, and bone marrow failure (1–9). There are at least 13 distinct FA complementation groups, each of which is associated with an identified gene (2, 9, 10). Eight of them are components of the FA core complex (FANC A, B, C, E, F, G, L, and M) that is epistatic to the monoubiquitination of both FANCI and FANCD2, a key event to initiate interstrand cross-link (ICL) repair (2, 9, 11). Downstream of or parallel to the FANCI and FANCD2 monoubiquitination are the proteins involved in double strand break repair and breast cancer susceptibility (i.e. FANCD1/BRCA2, FANCJ/BRIP1, and FANCN/PALB2) (2, 9).FANCI is the most recently identified FA gene (11–13). FANCI protein is believed to form a FANCI-FANCD2 (ID) complex with FANCD2, because they co-immunoprecipitate with each other from cell lysates and their stabilities are interdependent of each other (9, 11, 13). FANCI and FANCD2 are paralogs to each other, since they share sequence homology and co-evolve in the same species (11). Both FANCI and FANCD2 can be phosphorylated by ATR/ATM (ataxia telangiectasia and Rad3-related/ataxia telangiectasia-mutated) kinases under genotoxic stress (11, 14, 15). The phosphorylation of FANCI seems to function as a molecular switch to turn on the FA repair pathway (16). The monoubiquitination of FANCD2 at lysine 561 plays a critical role in cellular resistance to DNA cross-linking agents and is required for FANCD2 to form damage-induced foci with BRCA1, BRCA2, RAD51, FANCJ, FANCN, and γ-H2AX on chromatin during S phase of the cell cycle (17–25). In response to DNA damage or replication stress, FANCI is also monoubiquitinated at lysine 523 and recruited to the DNA repair nuclear foci (11, 13). The monoubiquitination of both FANCI and FANCD2 depends on the FA core complex (11, 13, 26), and the ubiquitination of FANCI relies on the FANCD2 monoubiquitination (2, 11). In an in vitro minimally reconstituted system, FANCI enhances FANCD2 monoubiquitination and increases its specificity toward the in vivo ubiquitination site (27).FANCI is a leucine-rich peptide (14.8% of leucine residues) with limited sequence information to indicate which processes it might be involved in. Besides the monoubiquitination site Lys⁵²³ and the putative nuclear localization signals (Fig. 1A), FANCI contains both ARM (armadillo) repeats and a conserved C-terminal EDGE motif as FANCD2 does (11, 28). The EDGE sequence in FANCD2 is not required for monoubiquitination but is required for mitomycin C (MMC) sensitivity (28). The ARM repeats form α-α superhelix folds and are involved in mediating protein-protein interactions (11, 29). In addition, FANCI, at its N terminus, contains a leucine zipper domain (aa 130–151) that could be involved in mediating protein-protein or protein-DNA interactions (Fig. 1A) (30–33). FANCD2, the paralog of FANCI, was reported to bind to double strand DNA ends and Holliday junctions (34).Open in a separate windowFIGURE 1.Purified human FANCI binds to DNA promiscuously. A, schematic diagram of predicted FANCI motifs and mutagenesis strategy to define the DNA binding domain. The ranges of numbers indicate how FANCI was truncated (e.g. 801–1328 represents FANCI-(801–1328)). NLS, predicted nuclear localization signal (aa 779–795 and 1323–1328); K523, lysine 523, the monoubiquitination site. The leucine zipper (orange bars, aa 130–151), ARM repeats (green bars), and EDGE motif (blue bars) are indicated. Red bars with a slash indicate the point mutations shown on the left. B, SDS-PAGE of the purified proteins stained with Coomassie Brilliant Blue R-250. R1285Q and D1301A are two point mutants of FANCI. All FANCI variants are tagged by hexahistidine. FANCD2 is in its native form. Protein markers in kilodaltons are indicated. C, titration of WT-FANCI for the DNA binding activity. Diagrams of the DNA substrates are shown at the top of each set of reactions. *, ³²P-labeled 5′-end. HJ, Holliday junction. Concentrations of FANCI were 0, 20, 40, 60, and 80 nm (ascending triangles). The substrate concentration was 1 nm. Protein-DNA complex is indicated by an arrow. D, supershift assay. 1 nm of ssDNA was incubated with PBS (lane 1), 80 nm FANCI alone (lane 2), and 80 nm FANCI preincubated with a specific FANCI antibody (lane 3) in the condition described under “Experimental Procedures.”In order to delineate the function of FANCI protein, we purified the recombinant FANCI from the baculovirus expression system. In this study, we report the DNA binding activity of FANCI. Unlike FANCD2, FANCI binds to different DNA structures, including single-stranded DNA (ssDNA), double-stranded DNA (dsDNA), 5′-tailed, 3′-tailed, splayed arm, 5′-flap, 3′-flap, static fork, and Holliday junction with preference toward branched structures in the presence of FANCD2. Our data suggest that the dynamic DNA binding activity of FANCI and the preferential recognition of branched structures by the ID complex are likely to be the mechanisms to initiate downstream repair events.     

Dissecting an Allosteric Switch in Caspase-7 Using Chemical and Mutational Probes

Apoptotic caspases, such as caspase-7, are stored as inactive protease zymogens, and when activated, lead to a fate-determining switch to induce cell death. We previously discovered small molecule thiol-containing inhibitors that when tethered revealed an allosteric site and trapped a conformation similar to the zymogen form of the enzyme. We noted three structural transitions that the compounds induced: (i) breaking of an interaction between Tyr-223 and Arg-187 in the allosteric site, which prevents proper ordering of the catalytic cysteine; (ii) pinning the L2′ loop over the allosteric site, which blocks critical interactions for proper ordering of the substrate-binding groove; and (iii) a hinge-like rotation at Gly-188 positioned after the catalytic Cys-186 and Arg-187. Here we report a systematic mutational analysis of these regions to dissect their functional importance to mediate the allosteric transition induced by these compounds. Mutating the hinge Gly-188 to the restrictive proline causes a massive ∼6000-fold reduction in catalytic efficiency. Mutations in the Arg-187–Tyr-223 couple have a far less dramatic effect (3–20-fold reductions). Interestingly, although the allosteric couple mutants still allow binding and allosteric inhibition, they partially relieve the mutual exclusivity of binding between inhibitors at the active and allosteric sites. These data highlight a small set of residues critical for mediating the transition from active to inactive zymogen-like states.Caspases are a family of dimeric cysteine proteases whose members control the ultimate steps for apoptosis (programmed cell death) or innate inflammation among others (for reviews, see Refs. 1 and 2). During apoptosis, the upstream initiator caspases (caspase-8 and -9) activate the downstream executioner caspases (caspase-3, -6, and-7) via zymogen maturation (3). The activated executioner caspases then cleave upwards of 500 key proteins (4–6) and DNA, leading to cell death. Due to their pivotal role in apoptosis, the caspases are involved both in embryonic development and in dysfunction in diseases including cancer and stroke (7). The 11 human caspases share a common active site cysteine-histidine dyad (8), and derive their name, cysteine aspartate proteases, from their exquisite specificity for cleaving substrate proteins after specific aspartate residues (9–13). Thus, it has been difficult to develop active site-directed inhibitors with significant specificity for one caspase over the others (14). Despite difficulties in obtaining specificity, there has been a long-standing correlation between efficacy of caspase inhibitors in vitro and their ability to inhibit caspases and apoptosis in vivo (for review, see Ref. 31). Thus, a clear understanding of in vitro inhibitor function is central to the ability control caspase function in vivo.Caspase-7 has been a paradigm for understanding the structure and dynamics of the executioner caspases (15–21). The substrate-binding site is composed of four loops; L2, L3, and L4 are contributed from one-half of the caspase dimer, and L2′ is contributed from the other half of the caspase dimer (Fig. 1). These loops appear highly dynamic as they are only observed in x-ray structures when bound to substrate or substrate analogs in the catalytically competent conformation (17–19, 22) (Fig. 1B).Open in a separate windowFIGURE 1.Allosteric site and dimeric structure in caspase-7. A, the surface of active site-bound caspase-7 shows a large open allosteric (yellow) site at the dimer interface. This cavity is distinct from the active sites, which are bound with the active site inhibitor DEVD (green sticks). B, large subunits of caspase-7 dimers (dark green and dark purple) contain the active site cysteine-histidine dyad. The small subunits (light green and light purple) contain the allosteric site cysteine 290. The conformation of the substrate-binding loops (L2, L2′, L3, and L4) in active caspase-7 (Protein Data Bank (PDB) number 1f1j) is depicted. The L2′ loop (spheres) from one-half of the dimer interacts with the L2 loop from the other half of the dimer. C, binding of allosteric inhibitors influences the conformation of the L2′ loop (spheres), which folds over the allosteric cavity (PDB number 1shj). Subunit rendering is as in panel A. Panels A, B, and C are in the same orientation.A potential alternative to active site inhibitors are allosteric inhibitors that have been seeded by the discovery of selective cysteine-tethered allosteric inhibitors for either apoptotic executioner caspase-3 or apoptotic executioner caspase-7 (23) as well as the inflammatory caspase-1 (24). These thiol-containing compounds bind to a putative allosteric site through disulfide bond formation with a thiol in the cavity at the dimer interface (Fig. 1A) (23, 24). X-ray structures of caspase-7 bound to allosteric inhibitors FICA³ and DICA (Fig. 2) show that these compounds trigger conformational rearrangements that stabilize the inactive zymogen-like conformation over the substrate-bound, active conformation. The ability of small molecules to hold mature caspase-7 in a conformation that mimics the naturally occurring, inactive zymogen state underscores the utility and biological relevance of the allosteric mechanism of inhibition. Several structural changes are evident between these allosterically inhibited and active states. (i) The allosteric inhibitors directly disrupt an interaction between Arg-187 (next to the catalytic Cys-186) and Tyr-223 that springs the Arg-187 into the active site (Fig. 3), (ii) this conformational change appears to be facilitated by a hinge-like movement about Gly-188, and (iii) the L2′ loop folds down to cover the allosteric inhibitor and assumes a zymogen-like conformation (Fig. 1C) (23).Open in a separate windowFIGURE 2.Structure of allosteric inhibitors DICA and FICA. DICA and FICA are hydrophobic small molecules that bind to an allosteric site at the dimer interface of caspase-7. Binding of DICA/FICA is mediated by a disulfide between the compound thiol and Cys-290 in caspase-7.Open in a separate windowFIGURE 3.Movement of L2′ blocking arm. The region of caspase-7 encompassing the allosteric couple Arg-187 and Tyr-223 is boxed. The inset shows the down orientation of Arg-187 and Tyr-223 in the active conformation with DEVD substrate mimic (orange spheres) in the active site. In the allosteric/zymogen conformation, Arg-187 and Tyr-223 are pushed up by DICA (blue spheres).Here, using mutational analysis and small molecule inhibitors, we assess the importance of these three structural units to modulate both the inhibition of the enzyme and the coupling between allosteric and active site labeling. Our data suggest that the hinge movement and pinning of the L2-L2′ are most critical for transitioning between the active and inactive forms of the enzyme.     

Drug Effect Unveils Inter-head Cooperativity and Strain-dependent ADP Release in Fast Skeletal Actomyosin

Amrinone is a bipyridine compound with characteristic effects on the force-velocity relationship of fast skeletal muscle, including a reduction in the maximum shortening velocity and increased maximum isometric force. Here we performed experiments to elucidate the molecular mechanisms for these effects, with the additional aim to gain insight into the molecular mechanisms underlying the force-velocity relationship. In vitro motility assays established that amrinone reduces the sliding velocity of heavy meromyosin-propelled actin filaments by 30% at different ionic strengths of the assay solution. Stopped-flow studies of myofibrils, heavy meromyosin and myosin subfragment 1, showed that the effects on sliding speed were not because of a reduced rate of ATP-induced actomyosin dissociation because the rate of this process was increased by amrinone. Moreover, optical tweezers studies could not detect any amrinone-induced changes in the working stroke length. In contrast, the ADP affinity of acto-heavy meromyosin was increased about 2-fold by 1 mm amrinone. Similar effects were not observed for acto-subfragment 1. Together with the other findings, this suggests that the amrinone-induced reduction in sliding velocity is attributed to inhibition of a strain-dependent ADP release step. Modeling results show that such an effect may account for the amrinone-induced changes of the force-velocity relationship. The data emphasize the importance of the rate of a strain-dependent ADP release step in influencing the maximum sliding velocity in fast skeletal muscle. The data also lead us to discuss the possible importance of cooperative interactions between the two myosin heads in muscle contraction.Muscle contraction, as well as several other aspects of cell motility, results from cyclic interactions between myosin II motors and actin filaments. These force-generating interactions are driven by the hydrolysis of ATP at the myosin active site as outlined in Scheme 1 (1–3). In the absence of actin, the P_i and ADP release steps (k₄ and k₅) are rate-limiting for the entire cycle at high (>12 °C) and low temperatures, respectively (4–6). In the presence of actin, the rate of P_i release increases significantly, and the overall cycle is accelerated more than 2 orders of magnitude. The sliding velocity of myosin-propelled motors is generally believed to be rate-limited by actomyosin dissociation (rate constant k′₅, k′₆, or k′₂ in Scheme 1) (7). Alternatively, some studies (8, 9) have suggested that the sliding velocity is determined by the fraction of myosin heads in the weak-binding states, AM⁴ ATP and AM ADP P_i. However, it is worth emphasizing that K_T is very low under physiological conditions (1, 3) with low population of these states. For the same reason, the rate of dissociation of the AM complex is governed by K′₁ and k′₂.Open in a separate windowSCHEME 1.Simplified kinetics scheme for MgATP turnover by myosin (lower row) and actomyosin (upper row). Inorganic phosphate is denoted by P_i; MgATP is denoted by ATP, and MgADP is denoted by ADP; myosin is denoted by M. The states AM*ADP and AM ADP correspond to myosin heads with their nucleotide binding pocket in a partially closed and open conformation, respectively (7, 52). Rate constants are indicated by lowercase letters (rightward transitions, k₂ − k₅ and k′₂ − k′₅, or leftward transitions, k₋₂ − k₋₅ and k′₋₂ − k′₋₅) and equilibrium constants by uppercase letters (K₁, K′₁, K_T, K₃, K′₃, K₆, k′₆, and K_DP). The equilibrium constants are association constants except for simple bimolecular reactions where they are defined as k_i/k_−i.For the study of contractile mechanisms in both muscle and other types of cells, drugs may be useful as pharmacological tools affecting different transitions or states in the force-generating cycle. Whereas the use of drugs as tools may be less specific than site-directed mutagenesis, it also has advantages. The motor protein function may be studied in vivo, with maintained ordering of the protein components, e.g. as in the muscle sarcomere, allowing more insight into the relationship between specific molecular events and contractile properties of muscle. A drug that has been used quite extensively in this context is butanedione monoxime. The usefulness of this drug is based on firm characterization of its effect on actomyosin function on the molecular level (3, 10–13). More recently other drugs, like N-benzyl-p-toluene sulfonamide (14, 15) and blebbistatin (16), have been found to affect myosin function, and their effects at the molecular level have also been elucidated in some detail (14, 15, 17, 18). Both these drugs appear to affect the actomyosin interaction in a similar way as butanedione monoxime by inhibiting a step before (or very early in) the myosin power stroke, leading to the inhibition of actomyosin cross-bridge formation and force production.In contrast to the reduced isometric force, caused by the above mentioned drugs, the bipyridine compound amrinone (Fig. 1A) has been found to increase the isometric force production of fast intact skeletal muscles of the frog (19, 20) and mouse (21) and also of fast (but much less slow) skinned muscle fibers of the rat (22). In all the fast myosin preparations, the effect of about 1 mm amrinone on isometric force was associated with characteristic changes of the force-velocity relationship (Fig. 1B), including a reduced maximum velocity of shortening (19–22) and a reduced curvature of the force-velocity relationship (19–22). The latter effect was accompanied (20, 21) by a less pronounced deviation of the force-velocity relationship from the hyperbolic shape (23) at high loads. There have been different interpretations of the drug effects. It has been proposed (20–22) that amrinone might competitively inhibit the MgATP binding by myosin. However, more recently, results from in vitro motility assay experiments (24) challenged this idea. These results showed that amrinone reduces the sliding velocity (V_max) at saturating MgATP concentrations but not at MgATP concentrations close to, or below, the K_m value for the hyperbolic relationship between MgATP concentration and sliding velocity. Such a combination of effects is consistent with a reduced MgADP release rate (24) but not with competitive inhibition of substrate binding. However, effects of amrinone on the MgADP release rate have not been directly demonstrated. Additionally, in view of the uncertainty about what step actually determines the sliding velocity at saturating [MgATP] (see above and Refs. 7–9), it is of interest to consider other possible drug effects that could account for the data of Klinth et al. (24). These include the following: 1) an increased drag force, e.g. because of enhancement of weak actomyosin interactions; 2) a reduced step length; and 3) effects of the drug on the rate of MgATP-induced dissociation of actomyosin.Open in a separate windowFIGURE 1.A, structure of amrinone. B, experimental force-velocity data obtained in the presence (filled symbols) and absence (open symbols) of 1.1 mm amrinone. The data, from intact single frog muscle fibers, were obtained at 2 °C and fitted by Hill''s (42) hyperbola (lines) for data truncated at 80% of the maximum isometric force. Filled line, equation fitted to control data, a/P₀* = 0.185; P₀*/P₀ = 1.196. Dashed line, amrinone, a/P₀* = 0.347; P₀*/P₀ = 1.009. Force-velocity data were obtained in collaboration with Professor K. A. P. Edman. Same data as in Fig. 8 of Ref. 20. Note a decrease in maximum sliding velocity and curvature of the force-velocity relationship at low force, in response to amrinone. Also note that amrinone caused increased isometric force and a reduced deviation of the force-velocity relationship from the Hill''s hyperbola at high force. All changes of the force-velocity relationship were statistically significant (20), and similar changes were later also observed in intact mouse muscle and skinned rat muscle fibers. Data in Fig. 1 are published by agreement with Professor K. A. P. Edman.To differentiate between these hypotheses for the amrinone effects, and to gain more general insight into fundamental aspects of muscle function (e.g. mechanisms underlying the force-velocity relationship), we here study the molecular effects of amrinone on fast skeletal muscle myosin preparations in the presence and absence of actin.In vitro motility assay studies at different ionic strengths suggest that drag forces, caused by increased fraction of myosin heads in weak binding states, are not important for the effect of amrinone on sliding velocity. Likewise, optical tweezers studies showed no effect of the drug on the myosin step length. Finally, ideas that amrinone should reduce sliding velocity by reduced rate of MgATP-induced dissociation could be discarded because the drug actually increased the rate of this process. Instead, we found an amrinone-induced increase in the MgADP affinity of heavy meromyosin (HMM) in the presence of actin. Interestingly, similar effects of amrinone were not observed using myosin S1. As discussed below, this result and other results point to an amrinone-induced reduction in the rate of a strain-dependent MgADP release step. Simulations, using a model modified from that of Edman et al. (25), support this proposed mechanism of action. The results are discussed in relation to fundamental mechanisms underlying the force-velocity relationship of fast skeletal muscle, including which step determines shortening velocity and the possible importance of inter-head cooperativity.     

Translesional DNA Synthesis through a C8-Guanyl Adduct of 2-Amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP) in Vitro: REV1 INSERTS dC OPPOSITE THE LESION, AND DNA POLYMERASE �� POTENTIALLY CATALYZES EXTENSION REACTION FROM THE 3��-dC TERMINUS*

2-Amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP) is the most abundant heterocyclic amine in cooked foods, and is both mutagenic and carcinogenic. It has been suspected that the carcinogenicity of PhIP is derived from its ability to form DNA adducts, principally dG-C8-PhIP. To shed further light on the molecular mechanisms underlying the induction of mutations by PhIP, in vitro DNA synthesis analyses were carried out using a dG-C8-PhIP-modified oligonucleotide template. In this template, the dG-C8-PhIP adduct was introduced into the second G of the TCC GGG AAC sequence located in the 5′ region. This represents one of the mutation hot spots in the rat Apc gene that is targeted by PhIP. Guanine deletions at this site in the Apc gene have been found to be preferentially induced by PhIP in rat colon tumors. DNA synthesis with A- or B-family DNA polymerases, such as Escherichia coli polymerase (pol) I and human pol δ, was completely blocked at the adducted guanine base. Translesional synthesis polymerases of the Y-family, pol η, pol ι, pol κ, and REV1, were also used for in vitro DNA synthesis analyses with the same templates. REV1, pol η, and pol κ were able to insert dCTP opposite dG-C8-PhIP, although the efficiencies for pol η and pol κ were low. pol κ was also able to catalyze the extension reaction from the dC opposite dG-C8-PhIP, during which it often skipped over one dG of the triple dG sequence on the template. This slippage probably leads to the single dG base deletion in colon tumors.Heterocyclic amines (HCAs)³ are naturally occurring genotoxic carcinogens produced from cooking meat (1). The initial carcinogenic event induced by HCAs is metabolic activation and subsequent covalent bond formation with DNA (1, 2). 2- Amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP) is the most abundant heterocyclic amine in cooked foods, and was isolated from fried ground beef (3, 4). PhIP possesses both mutagenic and carcinogenic properties (5–8). Epidemiological studies have revealed that a positive correlation exists between PhIP exposure and mammary cancer incidence (9). PhIP induces colon and prostate cancers in male rats and breast cancer in female rats (8, 10).The incidences of colon, prostate, and breast cancers are steadily increasing in Japan and other countries and this has been found to correlate with a more Westernized lifestyle. Elucidating the molecular mechanisms underlying PhIP-induced mutations is therefore of considerable interest. It is suspected that the carcinogenicity of PhIP is derived from the formation of DNA adducts, principally dG-C8-PhIP (11–14) (see Fig. 1). Studies of the mutation spectrum of PhIP in mammalian cultured cells and transgenic animals have revealed that G to T transversions are predominant and that guanine deletions from G stretches, especially from the 5′-GGGA-3′ sequence, are significant (15–20). Five mutations in the Apc gene were detected in four of eight PhIP-induced rat colon tumors, and all of these mutations involved a single base deletion of guanine from 5′-GGGA-3′ (21). These mutation spectra are thought to be influenced by various factors, including the primary structure of the target gene itself, the capacity of translesional DNA polymerases, and the activity level of repair enzymes (1). However, the molecular mechanisms underlying the formation of PhIP-induced mutations are largely unknown.Open in a separate windowFIGURE 1.Structure of the dG-C8-PhIP adduct.To shed further light on the molecular processes that underpin the mutations induced by PhIP, we performed in vitro DNA synthesis analyses using a dG-C8-PhIP-modified oligonucleotide template. We have recently reported the successful synthesis of oligonucleotides harboring a site-specific PhIP adduct (22). In our current study, we used this synthesis method to construct a 32-mer oligonucleotide template containing a 5′-TTCGGGAAC-3′ sequence with different site-specific PhIP adducts. We then utilized the resulting constructs in DNA synthesis analyses to reconstitute the PhIP-induced mutagenesis of the rat APC gene. DNA synthesis reactions with A- or B-family DNA polymerases, such as Escherichia coli pol I and human pol δ, or translesional synthesis (TLS) polymerases of the Y-family, pol η, pol ι, pol κ, and REV1, were carried out. Kinetic analyses of pol κ and REV1, for which TLS activities at the PhIP adduct were detected, were also performed.     

Novel Lipofuscin Bisretinoids Prominent in Human Retina and in a Model of Recessive Stargardt Disease

Bisretinoid adducts accumulate as lipofuscin in retinal pigment epithelial (RPE) cells of the eye and are implicated in the pathology of inherited and age-related macular degeneration. Characterization of the bisretinoids A2E and the all-trans-retinal dimer series has shown that these pigments form from reactions in photoreceptor cell outer segments that involve all-trans-retinal, the product of photoisomerization of the visual chromophore 11-cis-retinal. Here we have identified two related but previously unknown RPE lipofuscin compounds. By high performance liquid chromatography-elec tro spray ionization-tandem mass spectrometry, we determined that the first of these compounds is a phosphatidyl-dihydropyridine bisretinoid; to indicate this structure and its formation from two vitamin A-aldehyde (A2), we will refer to it as A2-dihydropyridine-phosphatidyleth a nol amine (A2-DHP-PE). The second pigment, A2-dihydropyridine-eth a nol amine, forms from phosphate hydrolysis of A2-DHP-PE. The structure of A2-DHP-PE was corroborated by Fourier transform infrared spectroscopy, and density functional theory confirmed the presence of a dihydropyridine ring. This lipofuscin pigment is a fluorescent compound with absorbance maxima at ∼490 and 330 nm, and it was identified in human, mouse, and bovine eyes. We found that A2-DHP-PE forms in reaction mixtures of all-trans-retinal and phosphatidyleth a nol amine, and in mouse eyecups we observed an age-related accumulation. As compared with wild-type mice, A2-DHP-PE is more abundant in mice with a null mutation in Abca4 (ATP-binding cassette transporter 4), the gene causative for recessive Stargardt macular degeneration. Efforts to clarify the composition of RPE lipofuscin are important because these compounds are targets of gene-based and drug therapies that aim to alleviate ABCA4-related retinal disease.Throughout the life of an individual, retinal pigment epithelial (RPE)² cells of the eye accumulate bisretinoid adducts that comprise the lipofuscin of these cells (1–3). The compounds form as a byproduct of light-mediated isomerization of the visual chromophore 11-cis-retinal. Accordingly, conditions that reduce the production of all-trans-retinal (atRAL) from 11-cis-retinal photoisomerization, such as reduced serum vitamin A (4–6), variants, or mutations in the visual cycle protein RPE65 (7–9) and inhibitors of RPE65 and 11-cis retinol dehydrogenase (10–13), substantially reduce the formation of this material.Up to the present time, at least 17 constituents of RPE lipofuscin have been identified chromatographically and characterized structurally; added to these are biosynthetic intermediates such as N-retinylidene-phosphatidylethanolamine (NRPE), A2PE and dihydropyridinium-A2PE (see Fig. 1, A and B) (14–19). The first RPE lipofuscin constituent to be described was A2E (see Fig. 1A, inset). The pyridinium bisretinoid (14–16, 20, 21) structure of A2E (C₄₂H₅₈NO; molecular weight, 592) was confirmed by extensive nuclear magnetic resonance studies (14) and by total synthesis (22). A2E formation begins in photoreceptor outer segments when atRAL, instead of being reduced to all-trans-retinol, reacts with phosphatidylethanolamine (PE) in a 2:1 ratio. Although the double bonds along the side arms of A2E are all in the trans (E) position, Z-isomers of A2E have double bonds at the C-13/14 (isoA2E), C-9/9′-10/10′, and C-11/11′-12/12′ positions, and all are detectable in human and mouse RPE (16). These pigments exhibit absorbances in both the UV and visible regions of the spectrum (A2E: λ_max, 439 and 338 nm; iso-A2E: λ_max, 428 and 337 nm).Open in a separate windowFIGURE 1.Some bisretinoid compounds associated with RPE lipofuscin formation. Structures, molecular weight (Mw), UV-visible absorbance (nm), and electronic transition assignments (↔). Phosphate hydrolysis (dashed lines) of A2PE (A) and A2-DHP-PE (C) generates A2E and A2-DHP-E (insets in A and C). A2PE (A), dihydropyridinium-A2PE (B), A2-DHP-PE (C). The molecular weights are based on dipalmitic acid as the fatty acid constituent.Another bisretinoid compound of RPE lipofuscin also absorbs in the short wavelength region of the visible spectrum (17, 18, 23). This pigment, all-trans-retinal dimer (atRAL dimer; λ_max, 432 and 290 nm) forms from the condensation of two atRAL and is present in RPE lipofuscin as Schiff base conjugates with either PE or ethanolamine (atRAL dimer-PE and atRAL dimer-E, respectively) or as unconjugated atRAL dimer. The pigments atRAL dimer-PE and atRAL dimer-E absorb in the visible range at about 510 nm, a “red” shift relative to atRAL dimer that is attributable to protonation of the Schiff base linkage. Although A2E is a pyridinium salt containing a quaternary amine nitrogen that does not deprotonate or reprotonate (24), the protonation state of the Schiff base linkage in atRAL dimer-PE and atRAL dimer-E is pH-dependent (18).Other known constituents of RPE lipofuscin are generated by photooxidation. By mass spectrometry, the photooxidation products of A2E and atRAL dimer present as a series of peaks differing by increments of mass 16 beginning with M+ 592 (A2E) or M+ 552 (atRAL dimer) (18, 25). The moieties generated by the addition of oxygens at CC bonds of these bisretinoid compounds include endoperoxides, furanoid oxides, and epoxides (25–27). These oxidized products are more polar than the parent compound, and mono- and bis-oxidized forms of A2E and atRAL dimer have been detected in RPE from human eyes and in eyecups from mice with null mutations in Abca4^−/− (18, 25), the gene responsible for recessive Stargardt macular degeneration. It is also notable that unconjugated atRAL dimer is a more efficient generator of singlet oxygen than is A2E and is also a more efficient quencher of singlet oxygen (18).Insight into the composition of RPE lipofuscin and the biosynthetic pathways by which these compounds form aids in an understanding of retinal diseases characterized by lipofuscin overload, particularly those associated with mutations in ABCA4 (ATP-binding cassette transporter 4) of photoreceptor cells (1–3). We report that a previously unrecognized bisretinoid molecule absorbing with maxima at 490 and 331 nm is detected at elevated levels in Abca4^−/− mice, a model of recessive Stargardt macular degeneration. This compound is also present in human RPE. By high performance liquid chromatography-electrospray ionization-tandem mass spectrometry (HPLC-ESI-MS/MS), with corroboration by Fourier transform infrared spectroscopy (FTIR), we determined that this molecule is a bisretinoid presenting with a noncharged dihydropyridine core (Fig. 1C). We propose a biosynthetic pathway by which this pigment may form and demonstrate that enzymatic removal of the phosphatidic acid portion of the molecule generates a second novel component of RPE lipofuscin.     

The Nutrigenetics of Hyperhomocysteinemia: QUANTITATIVE PROTEOMICS REVEALS DIFFERENCES IN THE METHIONINE CYCLE ENZYMES OF GENE-INDUCED VERSUS DIET-INDUCED HYPERHOMOCYSTEINEMIA*

Hyperhomocysteinemia has long been associated with atherosclerosis and thrombosis and is an independent risk factor for cardiovascular disease. Its causes include both genetic and environmental factors. Although homocysteine is produced in every cell as an intermediate of the methionine cycle, the liver contributes the major portion found in circulation, and fatty liver is a common finding in homocystinuric patients. To understand the spectrum of proteins and associated pathways affected by hyperhomocysteinemia, we analyzed the mouse liver proteome of gene-induced (cystathionine β-synthase (CBS)) and diet-induced (high methionine) hyperhomocysteinemic mice using two-dimensional difference gel electrophoresis and Ingenuity Pathway Analysis. Nine proteins were identified whose expression was significantly changed by 2-fold (p ≤ 0.05) as a result of genotype, 27 proteins were changed as a result of diet, and 14 proteins were changed in response to genotype and diet. Importantly, three enzymes of the methionine cycle were up-regulated. S-Adenosylhomocysteine hydrolase increased in response to genotype and/or diet, whereas glycine N-methyltransferase and betaine-homocysteine methyltransferase only increased in response to diet. The antioxidant proteins peroxiredoxins 1 and 2 increased in wild-type mice fed the high methionine diet but not in the CBS mutants, suggesting a dysregulation in the antioxidant capacity of those animals. Furthermore, thioredoxin 1 decreased in both wild-type and CBS mutants on the diet but not in the mutants fed a control diet. Several urea cycle proteins increased in both diet groups; however, arginase 1 decreased in the CBS^+/− mice fed the control diet. Pathway analysis identified the retinoid X receptor signaling pathway as the top ranked network associated with the CBS^+/− genotype, whereas xenobiotic metabolism and the NRF2-mediated oxidative stress response were associated with the high methionine diet. Our results show that hyperhomocysteinemia, whether caused by a genetic mutation or diet, alters the abundance of several liver proteins involved in homocysteine/methionine metabolism, the urea cycle, and antioxidant defense.Homocysteine (Hcy)1 is a thiol-containing amino acid that is produced in every cell of the body as an intermediate of the methionine cycle (Fig. 1, Reactions 1–5) (1). Once formed, the catabolism of homocysteine occurs via three enzymatic pathways. 1) Hcy is remethylated back to methionine using vitamin B₁₂-dependent methionine synthase (Fig. 1, Reaction 4) and/or 2) betaine-homocysteine methyltransferase (BHMT) (Fig. 1, Reaction 5), and 3) Hcy is converted to cysteine via the transsulfuration pathway using CBS and γ-cystathionase (Fig. 1, Reactions 6 and 7). Under normal conditions ∼40–50% of the Hcy that is produced in the liver is remethylated, ∼40–50% is converted to cysteine, and a small amount is exported (1–3). However, when Hcy production is increased (i.e. increased dietary methionine/protein intake) or when Hcy catabolism is decreased (i.e. CBS deficiency or B vitamin deficiencies), excess Hcy is exported into the extracellular space, resulting in hyperhomocysteinemia (1–5).Open in a separate windowFig. 1.Homocysteine metabolism in liver and kidney. In classical homocystinuria, the initial enzyme of the transsulfuration pathway, CBS (Reaction 6), is deficient. MTHF, methylenetetrahydrofolate; THF, tetrahydrofolate; DHF, dihydrofolate; MeCbl, methylcobalamin; DMG, dimethylglycine; PLP, pyridoxal 5′-phosphate.Homocystinuria was first described in the 1960s by Carson et al. (6): they observed 10 pediatric patients with severely elevated levels of Hcy in the urine and hypermethioninemia. Normal concentrations of plasma total homocysteine (tHcy) range from 5 to 12 μm (7); however, in homocystinuria, tHcy levels can exceed 100 μm. Homocystinuric patients present with mental retardation, abnormal bone growth, fine hair, malar flush, and dislocation of the lens of the eye, and most die from premature cardiovascular disease (6, 8). Autopsy findings indicate widespread thromboembolism, arteriosclerosis, and fatty livers (6, 8). Mudd et al. (9, 10) identified the cause of homocystinuria as a defect in the enzyme cystathionine β-synthase. A recent study of newborn infants in Denmark estimated the birth prevalence for CBS heterozygosity to be about 1:20,000 (11).Plasma tHcy concentrations are also directly correlated with dietary methionine/protein intake (12, 13). Guttormsen et al. (13) demonstrated that a protein-rich meal affected tHcy for at least 8–24 h. When normal subjects were fed a low protein-containing breakfast (12–15 g), plasma methionine levels increased slightly after 2 h (22.5–27.5 μm), but tHcy levels did not change significantly. However, when these same subjects were fed a high protein meal (52 g), plasma methionine levels peaked after 4 h (38 μm), and tHcy rose steadily until a maximum level was reached 8 h postmeal (7.6 versus 8.5 μm) (13). Thus, the following questions can be raised. How does the hepatic proteome respond to a hyperhomocysteinemic diet, and are the changes that accompany such a diet the same as or different from those that may be observed in gene-induced hyperhomocysteinemia?Because hyperhomocysteinemia is a strong independent risk factor for cardiovascular, cerebrovascular, and peripheral vascular disease, most of the current research has focused on the mechanisms involved in Hcy-induced endothelial dysfunction (14–24). The results of those studies have concluded that Hcy induces intracellular oxidative stress by generating ROS, which in turn lead to decreased bioavailable nitric oxide (NO), altered gene expression, increased endoplasmic reticulum stress, and activation of cholesterol biosynthesis. Also, several studies have examined the association between hyperhomocysteinemia and alcoholic liver disease, but few have looked at the effect of Hcy on the non-alcoholic liver even though fatty liver is a constant finding in homocystinuria (6, 8), and the liver is the major source of circulating Hcy (4, 5, 10). We hypothesize that 1) the liver proteome will respond to hyperhomocysteinemia by altering the expression of proteins involved in methionine/homocysteine metabolism and antioxidant defense and that 2) the set of proteins that are expressed when hyperhomocysteinemia is induced by CBS deficiency will differ from those expressed as a result of a high methionine diet. In the present study, we use a well established mouse model of CBS deficiency to study the early changes in the liver proteome that accompany hyperhomocysteinemia (25).