Harnessing Genetic Diversity in Saccharomyces cerevisiae for Fermentation of Xylose in Hydrolysates of Alkaline Hydrogen Peroxide-Pretreated Biomass

The fermentation of lignocellulose-derived sugars, particularly xylose, into ethanol by the yeast Saccharomyces cerevisiae is known to be inhibited by compounds produced during feedstock pretreatment. We devised a strategy that combined chemical profiling of pretreated feedstocks, high-throughput phenotyping of genetically diverse S. cerevisiae strains isolated from a range of ecological niches, and directed engineering and evolution against identified inhibitors to produce strains with improved fermentation properties. We identified and quantified for the first time the major inhibitory compounds in alkaline hydrogen peroxide (AHP)-pretreated lignocellulosic hydrolysates, including Na⁺, acetate, and p-coumaric (pCA) and ferulic (FA) acids. By phenotyping these yeast strains for their abilities to grow in the presence of these AHP inhibitors, one heterozygous diploid strain tolerant to all four inhibitors was selected, engineered for xylose metabolism, and then allowed to evolve on xylose with increasing amounts of pCA and FA. After only 149 generations, one evolved isolate, GLBRCY87, exhibited faster xylose uptake rates in both laboratory media and AHP switchgrass hydrolysate than its ancestral GLBRCY73 strain and completely converted 115 g/liter of total sugars in undetoxified AHP hydrolysate into more than 40 g/liter ethanol. Strikingly, genome sequencing revealed that during the evolution from GLBRCY73, the GLBRCY87 strain acquired the conversion of heterozygous to homozygous alleles in chromosome VII and amplification of chromosome XIV. Our approach highlights that simultaneous selection on xylose and pCA or FA with a wild S. cerevisiae strain containing inherent tolerance to AHP pretreatment inhibitors has potential for rapid evolution of robust properties in lignocellulosic biofuel production.     

Yeast strains for ethanol production from lignocellulosic hydrolysates during in situ detoxification

Yeast strains Y1, Y4 and Y7 demonstrated high conversion efficiencies for sugars and high abilities to tolerate or metabolize inhibitors in dilute-acid lignocellulosic hydrolysates. Strains Y1 and Y4 completely consumed the glucose within 24 h in dilute-acid lignocellulosic hydrolysate during in situ detoxification, and the maximum ethanol yields reached 0.49 g and 0.45 g ethanol/g glucose, equivalent to maximum theoretical values of 96% and 88.2%, respectively. Strain Y1 could metabolize xylose to xylitol with a yield of 0.64 g/g xylose, whereas Y4 was unable to utilize xylose as a substrate. Strain Y7 was able to consume sugars (glucose and xylose) within 72 h during hydrolysate in situ detoxification, producing a high ethanol yield (equivalent to 93.6% of the maximum theoretical value). Y1 and Y7 are the most efficient yeast strains yet reported for producing ethanol from non-detoxified dilute-acid lignocellulosic hydrolysates. These findings offer huge potential for improving the economics of bio-ethanol production from lignocellulosic hydrolysates.     

Short-term adaptation during propagation improves the performance of xylose-fermenting <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> in simultaneous saccharification and co-fermentation

Background

Inhibitors that are generated during thermochemical pretreatment and hydrolysis impair the performance of microorganisms during fermentation of lignocellulosic hydrolysates. In omitting costly detoxification steps, the fermentation process relies extensively on the performance of the fermenting microorganism. One attractive option of improving its performance and tolerance to microbial inhibitors is short-term adaptation during propagation. This study determined the influence of short-term adaptation on the performance of recombinant Saccharomyces cerevisiae in simultaneous saccharification and co-fermentation (SSCF). The aim was to understand how short-term adaptation with lignocellulosic hydrolysate affects the cell mass yield of propagated yeast and performance in subsequent fermentation steps. The physiology of propagated yeast was examined with regard to viability, vitality, stress responses, and upregulation of relevant genes to identify any links between the beneficial traits that are promoted during adaptation and overall ethanol yields in co-fermentation.

Results

The presence of inhibitors during propagation significantly improved fermentation but lowered cell mass yield during propagation. Xylose utilization of adapted cultures was enhanced by increasing amounts of hydrolysate in the propagation. Ethanol yields improved by over 30 % with inhibitor concentrations that corresponded to ≥2.5 % water-insoluble solids (WIS) load during the propagation compared with the unadapted culture. Adaptation improved cell viability by >10 % and increased vitality by >20 %. Genes that conferred resistance against inhibitors were upregulated with increasing amounts of inhibitors during the propagation, but the adaptive response was not associated with improved ethanol yields in SSCF. The positive effects in SSCF were observed even with adaptation at inhibitor concentrations that corresponded to 2.5 % WIS. Higher amounts of hydrolysate in the propagation feed further improved the fermentation but increased the variability in fermentation outcomes and resulted in up to 20 % loss of cell mass yield.

Conclusions

Short-term adaptation during propagation improves the tolerance of inhibitor-resistant yeast strains to inhibitors in lignocellulosic hydrolysates and improves their ethanol yield in fermentation and xylose-fermenting capacity. A low amount of hydrolysate (corresponding to 2.5 % WIS) is optimal, whereas higher amounts decrease cell mass yield during propagation.

     

A C6/C5 co‐fermenting Saccharomyces cerevisiae strain with the alleviation of antagonism between xylose utilization and robustness

During second‐generation bioethanol production from lignocellulosic biomass, the desired traits for fermenting microorganisms, such as Saccharomyces cerevisiae, are high xylose utilization and high robustness to inhibitors in lignocellulosic hydrolysates. However, as observed previously, these two traits easily showed the antagonism, one rising and the other falling, in the C6/C5 co‐fermenting S. cerevisiae strain. In this study, LF1 obtained in our previous study is an engineered budding yeast strain with a superior co‐fermentation capacity of glucose and xylose, and was then mutated by atmospheric and room temperature plasma (ARTP) mutagenesis to improve its robustness. The ARTP‐treated cells were grown in 50% (v/v) leachate from lignocellulose pretreatment with high inhibitors content for adaptive evolution. After 30 days, the generated mutant LF1‐6 showed significantly enhanced tolerance, with a six‐fold increase in cell density in the above leachate. Unfortunately, its xylose utilization dropped markedly, indicating the recurrence of the negative correlation between xylose utilization and robustness. To alleviate this antagonism, LF1‐6 cells were iteratively mutated with ARTP mutagenesis and then anaerobically grown using xylose as the sole carbon source, and xylose utilization was restored in the resulting strain 6M‐15. 6M‐15 also exhibited increased co‐fermentation performance of xylose and glucose with the highest ethanol productivity reported to date (0.525 g g^?1 h^?1) in high‐level mixed sugars (80 g L^?1 glucose and 40 g L^?1 xylose) with no inhibitors. Meanwhile, its fermentation time was shortened by 8 h compared to that of LF1. During the fermentation of non‐detoxified lignocellulosic hydrolysate with high inhibitor concentrations at pH ~3.5, 6M‐15 can efficiently convert glucose and xylose with an ethanol yield of 0.43 g g^?1. 6M‐15 is also regarded as a potential chassis cell for further design of a customized strain suitable for production of second‐generation bioethanol or other high value‐added products from lignocellulosic biomass.     

Isolation and characterization of Cupriavidus basilensis HMF14 for biological removal of inhibitors from lignocellulosic hydrolysate

The formation of toxic fermentation inhibitors such as furfural and 5-hydroxy-2-methylfurfural (HMF) during acid (pre-)treatment of lignocellulose, calls for the efficient removal of these compounds. Lignocellulosic hydrolysates can be efficiently detoxified biologically with microorganisms that specifically metabolize the fermentation inhibitors while preserving the sugars for subsequent use by the fermentation host. The bacterium Cupriavidus basilensis HMF14 was isolated from enrichment cultures with HMF as the sole carbon source and was found to metabolize many of the toxic constituents of lignocellulosic hydrolysate including furfural, HMF, acetate, formate and a host of aromatic compounds. Remarkably, this microorganism does not grow on the most abundant sugars in lignocellulosic hydrolysates: glucose, xylose and arabinose. In addition, C. basilensis HMF14 can produce polyhydroxyalkanoates. Cultivation of C. basilensis HMF14 on wheat straw hydrolysate resulted in the complete removal of furfural, HMF, acetate and formate, leaving the sugar fraction intact. This unique substrate profile makes C. basilensis HMF14 extremely well suited for biological removal of inhibitors from lignocellulosic hydrolysates prior to their use as fermentation feedstock.     

Repeated-batch fermentation of lignocellulosic hydrolysate to ethanol using a hybrid Saccharomyces cerevisiae strain metabolically engineered for tolerance to acetic and formic acids

A major challenge associated with the fermentation of lignocellulose-derived hydrolysates is improved ethanol production in the presence of fermentation inhibitors, such as acetic and formic acids. Enhancement of transaldolase (TAL) and formate dehydrogenase (FDH) activities through metabolic engineering successfully conferred resistance to weak acids in a recombinant xylose-fermenting Saccharomyces cerevisiae strain. Moreover, hybridization of the metabolically engineered yeast strain improved ethanol production from xylose in the presence of both 30 mM acetate and 20 mM formate. Batch fermentation of lignocellulosic hydrolysate containing a mixture of glucose, fructose and xylose as carbon sources, as well as the fermentation inhibitors, acetate and formate, was performed for five cycles without any loss of fermentation capacity. Long-term stability of ethanol production in the fermentation phase was not only attributed to the coexpression of TAL and FDH genes, but also the hybridization of haploid strains.     

Ethanol production from selected lignocellulosic hydrolysates by genome shuffled strains of Scheffersomyces stipitis

Two genome-shuffled Scheffersomyces stipitis strains, GS301 and GS302, exhibiting improved tolerance to hardwood spent sulphite liquor, were tested for growth and fermentation performance on three wood hydrolysates: (a) steam-pretreated enzymatically hydrolyzed poplar hydrolysate from Mascoma Canada, (b) steam pretreated poplar hydrolysate from University of British Columbia Forest Products Biotechnology Laboratory, and (c) mixed hardwoods pre-hydrolysate from FPInnovations (FPI). In the FPI hydrolysate, the wild type (WT) died off within 25 h, while GS301 and GS302 survived beyond 100 h. In fermentation tests, GS301 and GS302 completely utilized glucose and xylose in each hydrolysate and produced 0.39–1.4% (w/v) ethanol. In contrast, the WT did not utilize or poorly utilized glucose and xylose and produced non-detectable to trace amounts of ethanol. The results demonstrated cross tolerance of the mutants to inhibitors in three different wood hydrolysates and reinforced the utility of mating-based genome shuffling approach in industrial yeast strain improvement.     

Biotechnological strategies to overcome inhibitors in lignocellulose hydrolysates for ethanol production: review

One of the major challenges faced in commercial production of lignocellulosic bioethanol is the inhibitory compounds generated during the thermo-chemical pre-treatment step of biomass. These inhibitory compounds are toxic to fermenting micro-organisms. The ethanol yield and productivity obtained during fermentation of lignocellulosic hydrolysates is decreased due to the presence of inhibiting compounds, such as weak acids, furans and phenolic compounds formed or released during thermo-chemical pre-treatment step such as acid and steam explosion. This review describes the application and/or effect of biological detoxification (removal of inhibitors before fermentation) or use of bioreduction capability of fermenting yeasts on the fermentability of the hydrolysates. Inhibition of yeast fermentation by the inhibitor compounds in the lignocellulosic hydrolysates can be reduced by treatment with enzymes such as the lignolytic enzymes, for example, laccase and micro-organisms such as Trichoderma reesei, Coniochaeta ligniaria NRRL30616, Trametes versicolor, Pseudomonas putida Fu1, Candida guilliermondii, and Ureibacillus thermosphaericus. Microbial and enzymatic detoxifications of lignocellulosic hydrolysate are mild and more specific in their action. The efficiency of enzymatic process is quite comparable to other physical and chemical methods. Adaptation of the fermentation yeasts to the lignocellulosic hydrolysate prior to fermentation is suggested as an alternative approach to detoxification. Increases in fermentation rate and ethanol yield by adapted micro-organisms to acid pre-treated lignocellulosic hydrolysates have been reported in some studies. Another approach to alleviate the inhibition problem is to use genetic engineering to introduce increased tolerance by Saccharomyces cerevisiae, for example, by overexpressing genes encoding enzymes for resistance against specific inhibitors and altering co-factor balance. Cloning of the laccase gene followed by heterologous expression in yeasts was shown to provide higher enzyme yields and permit production of laccases with desired properties for detoxification of lignocellulose hydrolysates. A combination of more inhibitor-tolerant yeast strains with efficient feed strategies such as fed-batch will likely improve lignocellulose-to-ethanol process robustness.     

Metabolomic study of interactive effects of phenol, furfural, and acetic acid on Saccharomyces cerevisiae

Metabolic profiling was carried out to investigate the interactive effects of three representative inhibitors (furfural, phenol, and acetic acid) in lignocellulosic hydrolysate on Saccharomyces cerevisiae during ethanol fermentation. Our results revealed that three inhibitors exhibited significantly synergistic effects on the growth, fermentation, and some metabolites of yeast. Acetic acid exerted the most severe effects on yeast in the combination of three inhibitors, enhancing amino acids metabolism and inhibiting central carbon metabolism. The effects on yeast cells by acetic acid were enhanced by the presence of phenol and furfural, which might be owing to the loss of membrane integrity and the inhibition on metabolism. Further investigation indicated that the combination of inhibitors also exhibited antagonistic effects mainly on threonine, cadaverine, inositol, and tryptophan, weakening or reversing the effects of individual inhibitor. It might be due to the more severe damage by the combined inhibitors, and different repairing mechanism of cells in the presence of individual and combined inhibitors. Better understanding of the synergistic and antagonistic effects of the inhibitors will be helpful for the improvement of tolerant strains and the optimization of lignocellulosic fermentation.     

Strain improvement of thermotolerant Saccharomyces cerevisiae VS strain for better utilization of lignocellulosic substrates

AIM: Pentose-utilizing yeast development by protoplast fusion and sequential mutations and ethanol fermentation using lignocellulosic substrate. METHODS AND RESULTS: Protoplasts of thermotolerant Saccharomyces cerevisiae and mesophilic, xylose-utilizing Candida shehatae were fused by electrofusion. The fusants were selected based on their growth at 42 degrees C and ability to utilize xylose. The selected best fusant was mutated sequentially and 3 mutant fusants obtained were tested for their stability. The mutant fusant CP11 was found to be stable and used for lignocellulosic fermentation. The Prosopis juliflora wood material was hydrolysed with 1% sulphuric acid initially for 18 h at room temperature and then for 20 min at 121 degrees C. The acid hydrolysate was separated and used for detoxification by ethyl acetate and overliming. The hard cellulosic fraction was hydrolysed with Aspergillus niger crude cellulase enzyme for 18 h at 50 degrees C. The substrate (15% w/v) yielded 84 g l(-1) sugars, representing 80% (w/w) hydrolysis of carbohydrate content present in the lignocellulosic material. The acid and enzyme hydrolysates were then equally mixed and used for fermentation with the developed fusant yeast (CP11). The fusant yeast gave an ethanol yield of 0.459 +/- 0.012 g g(-1), productivity of 0.67 +/- 0.015 g l(-1) h(-1) and fermentation efficiency of 90%. CONCLUSIONS: Protoplast fusion followed by sequential mutations method gave a stable and good performing fusant with maximum utilization of reducing sugars in the media. SIGNIFICANCE AND IMPACT OF THE STUDY: This new method could be applied to develop fusants for better biotechnological applications.     

Cofactor dependence in furan reduction by Saccharomyces cerevisiae in fermentation of acid-hydrolyzed lignocellulose

A decreased fermentation rate due to inhibition is a significant problem for economic conversion of acid-pretreated lignocellulose hydrolysates to ethanol, since the inhibition gives rise to a requirement for separate detoxification steps. Together with acetic acid, the sugar degradation products furfural and 5-hydroxymethyl furfural are the inhibiting compounds found at the highest concentrations in hydrolysates. These aldehydes have been shown to affect both the specific growth rate and the rate of fermentation by yeast. Two strains of Saccharomyces cerevisiae with different abilities to ferment inhibiting hydrolysates were evaluated in fermentations of a dilute acid hydrolysate from spruce, and the reducing activities for furfural and 5-hydroxymethyl furfural were determined. Crude cell extracts of a hydrolysate-tolerant strain (TMB3000) converted both furfural and 5-hydroxymethyl furfural to the corresponding alcohol at a rate that was severalfold higher than the rate observed for cell extracts of a less tolerant strain (CBS 8066), thereby confirming that there is a correlation between the fermentation rate in a lignocellulosic hydrolysate and the bioconversion capacity of a strain. The in vitro NADH-dependent furfural reduction capacity of TMB3000 was three times higher than that of CBS 8066 (1,200 mU/mg protein and 370 mU/mg protein, respectively) in fed-batch experiments. Furthermore, the inhibitor-tolerant strain TMB3000 displayed a previously unknown NADH-dependent reducing activity for 5-hydroxymethyl furfural (400 mU/mg protein during fed-batch fermentation of hydrolysates). No corresponding activity was found in strain CBS 8066 (<2 mU/mg). The ability to reduce 5-hydroxymethyl furfural is an important characteristic for the development of yeast strains with increased tolerance to lignocellulosic hydrolysates.     

A strain of <Emphasis Type="Italic">Meyerozyma guilliermondii</Emphasis> isolated from sugarcane juice is able to grow and ferment pentoses in synthetic and bagasse hydrolysate media

The search for new microbial strains that are able to withstand inhibitors released from hemicellulosic hydrolysis and are also still able to convert sugars in ethanol/xylitol is highly desirable. A yeast strain isolated from sugarcane juice and identified as Meyerozyma guilliermondii was evaluated for the ability to grow and ferment pentoses in synthetic media and in sugarcane bagasse hydrolysate. The yeast grew in xylose, arabinose and glucose at the same rate at an initial medium pH of 5.5. At pH 4.5, the yeast grew more slowly in arabinose. There was no sugar exhaustion within 60 h. At higher xylose concentrations with a higher initial cell concentration, sugar was exhausted within 96 h at pH 4.5. An increase of 350 % in biomass was obtained in detoxified hydrolysates, whereas supplementation with 3 g/L yeast extract increased biomass production by approximately 40 %. Ethanol and xylitol were produced more significantly in supplemented hydrolysates regardless of detoxification. Xylose consumption was enhanced in supplemented hydrolysates and arabinose was consumed only when xylose and glucose were no longer available. Supplementation had a greater impact on ethanol yield and productivity than detoxification; however, the product yields obtained in the present study are still much lower when compared to other yeast species in bagasse hydrolysate. By the other hand, the fermentation of both xylose and arabinose and capability of withstanding inhibitors are important characteristics of the strain assayed.     

Overcoming inhibitors in a hemicellulosic hydrolysate: improving fermentability by feedstock detoxification and adaptation of <Emphasis Type="Italic">Pichia stipitis</Emphasis>

In order to improve the fermentative efficiency of sugar maple hemicellulosic hydrolysates for fuel ethanol production, various methods to mitigate the effects of inhibitory compounds were employed. These methods included detoxification treatments utilizing activated charcoal, anion exchange resin, overliming, and ethyl acetate extraction. Results demonstrated the greatest fermentative improvement of 50% wood hydrolysate (v/v) by Pichia stipitis with activated charcoal treatment. Another method employed to reduce inhibition was an adaptation procedure to produce P. stipitis stains more tolerant of inhibitory compounds. This adaptation resulted in yeast variants capable of improved fermentation of 75% untreated wood hydrolysate (v/v), one of which produced 9.8 g/l ± 0.6 ethanol, whereas the parent strain produced 0.0 g/l ± 0.0 within the first 24 h. Adapted strains RS01, RS02, and RS03 were analyzed for glucose and xylose utilization and results demonstrated increased glucose and decreased xylose utilization rates in comparison to the wild type. These changes in carbohydrate utilization may be indicative of detoxification or tolerance activities related to proteins involved in glucose and xylose metabolism.     

Supercritical fluid extraction of a lignocellulosic hydrolysate of spruce for detoxification and to facilitate analysis of inhibitors

This work describes a novel approach to detoxify lignocellulosic hydrolysates and facilitate the analysis of inhibitory compounds, namely supercritical fluid extraction (SFE). The efficiency of the fermentation of lignocellulosic dilute-acid hydrolysates depends upon the composition of the hydrolysate and the organism used. Furthermore, it has been shown that inhibitors in the hydrolysate reduce the fermentation yield. This knowledge has given rise to the need to identify and remove the inhibiting compounds. Sample clean-up or work-up steps, to provide a clean and concentrated sample for the analytical system, facilitate the characterization of inhibitors, or indeed any compound in the hydrolysates. Removal of inhibitors was performed with countercurrent flow supercritical fluid extraction of liquid hydrolysates. Three different groups of inhibitors (furan derivatives, phenolic compounds, and aliphatic acids) and sugars were subsequently analyzed in the hydrolysate, extracted hydrolysate, and extract. The effect of the SFE treatment was examined with respect to fermentability with Saccharomyces cerevisiae. Not only did the extraction provide a clean and concentrated sample (extract) for analysis, but also a hydrolysate with increased fermentability as well as lower concentrations of inhibitors such as phenolics and furan derivatives.     

Conversion of corn fiber to ethanol by recombinant E. coli strain FBR3

Escherichia coli strain FBR3 that is an efficient biocatalyst for converting mixed sugar streams (eg, arabinose, glucose, and xylose) into ethanol. In this report, the strain was tested for conversion of corn fiber hydrolysates into ethanol. Corn fiber hydrolysates with total sugar concentrations of 7.5% (w/v) were prepared by reacting corn fiber with dilute sulfuric acid at 145°C. Initial fermentations of the hydrolysate by strain FBR3 had lag times of approximately 30 h judged by ethanol production. Further experiments indicated that the acetate present in the hydrolysate could not solely account for the long lag. The lag phase was greatly reduced by growing the pre-seed and seed cultures on corn fiber hydrolysate. Ethanol yields for the optimized fermentations were 90% of theoretical. Maximum ethanol concentrations were 2.80% w/v, and the fermentations were completed in approximately 50 h. The optimal pH for the fermentation was 6.5. Below this pH, sugar consumption was incomplete and above it, excess base addition was required throughout the fermentation. Two alternative neutralization methods (overliming and overliming with sulfite addition) have been reported for improving the fermentability of lignocellulosic hydrolysates. These methods further reduced the lag phase of the fermentation, albeit by a minor amount. Received 29 September 1998/ Accepted in revised form 20 February 1999     

Xylitol production from corn fiber and sugarcane bagasse hydrolysates by Candida tropicalis

A natural isolate, Candida tropicalis was tested for xylitol production from corn fiber and sugarcane bagasse hydrolysates. Fermentation of corn fiber and sugarcane bagasse hydrolysate showed xylose uptake and xylitol production, though these were very low, even after hydrolysate neutralization and treatments with activated charcoal and ion exchange resins. Initial xylitol production was found to be 0.43 g/g and 0.45 g/g of xylose utilised with corn fiber and sugarcane bagasse hydrolysate respectively. One of the critical factors for low xylitol production was the presence of inhibitors in these hydrolysates. To simulate influence of hemicellulosic sugar composition on xylitol yield, three different combinations of mixed sugar control experiments, without the presence of any inhibitors, have been performed and the strain produced 0.63 g/g, 0.68 g/g and 0.72 g/g of xylose respectively. To improve yeast growth and xylitol production with these hydrolysates, which contain inhibitors, the cells were adapted by sub culturing in the hydrolysate containing medium for 25 cycles. After adaptation the organism produced more xylitol 0.58 g/g and 0.65 g/g of xylose with corn fiber hydrolysate and sugarcane bagasse hydrolysate respectively.     

Cofactor Dependence in Furan Reduction by Saccharomyces cerevisiae in Fermentation of Acid-Hydrolyzed Lignocellulose

A decreased fermentation rate due to inhibition is a significant problem for economic conversion of acid-pretreated lignocellulose hydrolysates to ethanol, since the inhibition gives rise to a requirement for separate detoxification steps. Together with acetic acid, the sugar degradation products furfural and 5-hydroxymethyl furfural are the inhibiting compounds found at the highest concentrations in hydrolysates. These aldehydes have been shown to affect both the specific growth rate and the rate of fermentation by yeast. Two strains of Saccharomyces cerevisiae with different abilities to ferment inhibiting hydrolysates were evaluated in fermentations of a dilute acid hydrolysate from spruce, and the reducing activities for furfural and 5-hydroxymethyl furfural were determined. Crude cell extracts of a hydrolysate-tolerant strain (TMB3000) converted both furfural and 5-hydroxymethyl furfural to the corresponding alcohol at a rate that was severalfold higher than the rate observed for cell extracts of a less tolerant strain (CBS 8066), thereby confirming that there is a correlation between the fermentation rate in a lignocellulosic hydrolysate and the bioconversion capacity of a strain. The in vitro NADH-dependent furfural reduction capacity of TMB3000 was three times higher than that of CBS 8066 (1,200 mU/mg protein and 370 mU/mg protein, respectively) in fed-batch experiments. Furthermore, the inhibitor-tolerant strain TMB3000 displayed a previously unknown NADH-dependent reducing activity for 5-hydroxymethyl furfural (400 mU/mg protein during fed-batch fermentation of hydrolysates). No corresponding activity was found in strain CBS 8066 (<2 mU/mg). The ability to reduce 5-hydroxymethyl furfural is an important characteristic for the development of yeast strains with increased tolerance to lignocellulosic hydrolysates.     

Detoxification of hemicellulosic hydrolysates from extracted olive pomace by diananofiltration

Xylitol can be obtained from the pentose-rich hemicellulosic fraction of agricultural residues, such as extracted olive pomace, by fermentation. Dilute acid hydrolysis of lignocellulosic materials, produces the release of potential inhibitory compounds mainly furan derivatives, aliphatic acids, and phenolic compounds. In order to study the potential on the increase of the hydrolysate fermentability, detoxification experiments based on diananofiltration membrane separation processes were made. Two membranes, NF270 and NF90, were firstly evaluated using hydrolysate model solutions under total recirculation mode, to identify the best membrane for the detoxification. NF270 was chosen to be used in the diananofiltration experiment as it showed the lowest rejection for toxic compounds and highest permeate flux. Diananofiltration experiments, for hydrolysate model solutions and hydrolysate liquor, showed that nanofiltration is able to deplete inhibitory compounds and to obtain solutions with higher xylose content. Conversely to non-detoxified hydrolysates, nanofiltration detoxified hydrolysates enabled yeast growth and xylitol production by the yeast Debaryomyces hansenii, clearly pointing out that detoxification is an absolute requirement for extracted olive pomace dilute acid hydrolysate bioconversion.     

Evaluation of fermentative potential of <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> ATCC 36907 in cellulosic and hemicellulosic sugarcane bagasse hydrolysates on xylitol and ethanol production

This paper evaluates the fermentative potential of Kluyveromyces marxianus grown in sugarcane bagasse cellulosic and hemicellulosic hydrolysates obtained by acid hydrolysis. Ethanol was obtained from a single glucose fermentation product, whereas xylose assimilation resulted in xylitol as the main product and ethanol as a by-product derived from the metabolism of this pentose. Fermentation performed in a simulated hydrolysate medium with a glucose concentration similar to that of the hydrolysate resulted in ethanol productivity (Qp?=?0.86 g L^?1 h^?1) that was tenfold higher than the one observed in the cellulosic hydrolysate. However, the use of hemicellulosic hydrolysate favored xylose assimilation in comparison with simulated medium with xylose and glucose concentrations similar to those found in this hydrolysate, without toxic compounds such as acetic acid and phenols. Under this condition, xylitol yield was 53.8 % higher in relation to simulated medium. Thus, the total removal of toxic compounds from the hydrolysate is not necessary to obtain bioproducts from lignocellulosic hydrolysates.     

Improved ethanol production by a xylose-fermenting recombinant yeast strain constructed through a modified genome shuffling method

ABSTRACT: BACKGROUND: Xylose is the second most abundant carbohydrate in the lignocellulosic biomass hydrolysate. The fermentation of xylose is essential for the bioconversion of lignocelluloses to fuels and chemicals. However the wild-type strains of Saccharomyces cerevisiae are unable to utilize xylose. Many efforts have been made to construct recombinant yeast strains to enhance xylose fermentation over the past few decades. Xylose fermentation remains challenging due to the complexity of lignocellulosic biomass hydrolysate. In this study, a modified genome shuffling method was developed to improve xylose fermentation by S. cerevisiae. Recombinant yeast strains were constructed by recursive DNA shuffling with the recombination of entire genome of P. stipitis with that of S. cerevisiae. RESULTS: After two rounds of genome shuffling and screening, one potential recombinant yeast strain ScF2 was obtained. It was able to utilize high concentration of xylose (100 g/L to 250 g/L xylose) and produced ethanol. The recombinant yeast ScF2 produced ethanol more rapidly than the naturally occurring xylose-fermenting yeast, P. stipitis, with improved ethanol titre and much more enhanced xylose tolerance. CONCLUSION: The modified genome shuffling method developed in this study was more effective and easier to operate than the traditional protoplast fusion based method. Recombinant yeast strain ScF2 obtained in this was a promising candidate for industrial cellulosic ethanol production. In order to further enhance its xylose fermentation performance, ScF2 needs to be additionally improved by metabolic engineering and directed evolution.