Individual VH genes detected with oligonucleotide probes from the complementarity-determining regions

The germ-line and expressed Ig repertoire was examined with three oligonucleotide probes from the CDR regions of VH18/2, a VH gene from the largest human VH gene family, VHIII. Each oligonucleotide probe detected small numbers of germ-line bands (1-5) under conditions in which single base differences can be detected; more than half of these bands were polymorphic. The combined results from pairs of oligonucleotides from CDR1 and CDR2 identified a single band on Southern blots, as did a probe from the 5' end of CDR2. This band contains the 18/2 germ-line gene. The nucleotide sequence of expressed VH genes that hybridized to both CDR probes or to the 5' CDR2 probe were greater than or equal to 97% homologous to 18/2 in both the framework and CDR regions. This group of closely related VH genes, the 18/2 CDR family, appears to be overexpressed. The role of polymorphisms and differential expression of individual V genes in multigenic autoimmune diseases, as well as the organization and expression of individual V genes, can be examined with pairs of oligonucleotides from CDR1 and the 3' end of CDR2, or with probes from the 5' end of CDR2.     

Genomic Southern analysis with alkaline-phosphatase-conjugated oligonucleotide probes and the chemiluminescent substrate AMPPD

We have used a chemiluminescent detection method to improve both the sensitivity and the speed of detection of human genes with oligonucleotide probes. A direct chemiluminescent substrate (AMPPD) was used in combination with an alkaline-phosphatase-labeled oligonucleotide probe to detect the human tissue of plasminogen activator gene by Southern blot analysis. X-ray exposures obtained after 4 h were comparable to those obtained after 7 days with a 32P-labeled oligomer. After 16 h, the signal was 12 times greater than the 32P signal. The detection of the single-copy tissue plasminogen activator gene in 0.25 micrograms of human genomic DNA (76,000 molecules) was achieved. The improved sensitivity obtained by chemiluminescent detection should increase the usefulness of oligonucleotide probes in the direct Southern analysis of human genetic disorders.     

Enzyme-linked synthetic oligonucleotide probes: non-radioactive detection of enterotoxigenic Escherichia coli in faecal specimens.

Synthetic oligonucleotides, complementary to unique sequences in the heat stable enterotoxin gene of Escherichia coli specific for humans, were prepared with a 30-atom spacer arm and a 3' terminal sulfhydryl group which was coupled to bromoacetyl-derivatized alkaline phosphatase. The resulting direct enzyme-linked oligonucleotide probes, containing one enzyme molecule per oligonucleotide, successfully diagnosed enterotoxigenic Escherichia coli in clinical specimens by using a modified colony hybridization method and a colorimetric assay. The procedure is rapid, simple and reliable with a sensitivity equivalent to that using 5'-terminally labelled [32p]-oligonucleotide probes. The results indicate that the enzyme-labelled oligonucleotide probes should be applicable to the routine diagnosis of enterotoxigenic Escherichia coli and possess the potential for the detection of other microbial pathogens.     

Preparation of sensitive and specific oligonucleotide probes tailed using terminal transferase and dITP

An oligonucleotide probe tailed with deoxyadenosine-5'-triphosphate or deoxythymine-5'-triphosphate is detectable with high sensitivity, but has a major drawback--the tail co-hybridizes specifically to complementary sequences. This can be a problem when screening cDNA clones that contain poly(dA) sequences. While it is possible to mask the cDNA tail with unlabeled poly(dA) or poly(A) oligonucleotides, false-positive clones are still produced because complete masking of extremely long (dA) tails is difficult. As a result, only cDNA clones that have extremely long poly(dA) sequences are often obtained by hybridization screening using tailed probes. In this report, we describe an oligonucleotide probe tailed with DIG-labeled nucleotide in combination with deoxyinosine-5'-triphosphate that was highly specific and sensitive to cDNAs. Terminal deoxynucleotidyl transferase efficiently adds dI nucleotides to the 3'-end. The dI of the tails did not pair with any nucleotides under stringent hybridization so that the specificity of hybridization assays remained high without affecting the sensitivity of the test. Colony hybridization experiments demonstrated that there were very few (1 of 80 tested) false positives using this technique. Its use may increase the accuracy of cDNA screening.     

Analysis of oligonucleotide microarrays by 3' end labeling using fluorescent nucleotides and terminal transferase

A simple enzymatic labeling procedure is described to determine spot quality in oligonucleotide microarrays. By using fluorescently labeled dideoxynucleotides or ribonucleotides as substrate for terminal deoxynucleotidyl transferase (TdT), a single fluorophore can be covalently attached at the 3' end of each oligonucleotide probe molecule in the spot. Fluorescein-12-ddUTP CyTM3-ddUTP Cy5-UTP, and Cy3-UTP were compared as TdT substrates for 3' end labeling an array of 1273 hexamer probes. Cy5-UTP was found to show minimal bias toward probe base composition and is therefore well suited for quantitative analysis of microarray spots where the oligonucleotide probes are coupled via a 5' end linkage to the solid phase.     

Nonradioactive labeling of synthetic oligonucleotide probes with terminal deoxynucleotidyl transferase

Synthetic oligonucleotides were tailed at the 3' end using terminal deoxynucleotidyl transferase. Nucleotide triphosphates with free primary amines at the end of side chains were compared for their tailing efficiency and/or detection sensitivity, using biotin-11-dUTP as a reference. Free primary amines were tagged with activated biotin or fluorescein isothiocyanate. The probes were then detected with either streptavidin-alkaline phosphatase complex or anti-fluorescein antibodies and alkaline phosphatase-conjugated secondary antibodies. Tailing conditions were optimized and the probes were tested for detection of Escherichia coli ST1a enterotoxin DNA and rotavirus RNA.     

生物素标记寡核苷酸探针探测扩增的病理性突变珠蛋白基因

用末端转移酶催化生物素核苷酸底物(Biotin-ll-dUTP)共价连接在合成的寡核苷酸3’羟基末端,从而合成了两种寡核苷酸探针(β~T_(41-42)及β~A_(41-42))。用它们分别与克隆化扩增的正常和突变的β—珠蛋白基因片段杂变。结果表明该探针都具有与~(32)P探针相似的特异性,其杂交的灵敏度为2—3pg(特异序列)。进而将探测HbS基因的正常和异常两种寡核苷酸19聚体(β~A_6和β~S_6)用~(32)P和生物素分别标记;将HbS杂合子病人的白细胞DNA经聚合酶链反应(PCR)法扩增,并以含正常β—珠蛋白基因的DNA片段作对照,与两种探针分别进行斑点杂交。所得结果完全一致;Hbs杂合子DNA对正常和异常探针都显出杂交信号,而正常DNA只与β~A探针显杂交信号。     

Sequencing-independent method to generate oligonucleotide probes targeting a variable region in bacterial 16S rRNA by PCR with detachable primers

Oligonucleotide probes targeting the small-subunit rRNA are commonly used to detect and quantify bacteria in natural environments. We developed a PCR-based approach that allows synthesis of oligonucleotide probes targeting a variable region in the 16S rRNA without prior knowledge of the target sequence. Analysis of all 16S rRNA gene sequences in the Ribosomal Database Project database revealed two universal primer regions bracketing a variable, population-specific region. The probe synthesis is based on a two-step PCR amplification of this variable region in the 16S rRNA gene by using three universal bacterial primers. First, a double-stranded product is generated, which then serves as template in a linear amplification. After each of these steps, products are bound to magnetic beads and the primers are detached through hydrolysis of a ribonucleotide at the 3' end of the primers. This ultimately produces a single-stranded oligonucleotide of about 30 bases corresponding to the target. As probes, the oligonucleotides are highly specific and could discriminate between nucleic acids from closely and distantly related bacterial strains, including different species of VIBRIO: The method will facilitate rapid generation of oligonucleotide probes for large-scale hybridization assays such as screening of clone libraries or strain collections, ribotyping microarrays, and in situ hybridization. An additional advantage of the method is that fluorescently or radioactively labeled nucleotides can be incorporated during the second amplification, yielding intensely labeled probes.     

Directed covalent immobilization of aminated DNA probes on aminated plates

A new protocol that enables the immobilization of DNA probes on aminated micro-titer plates activated with aldehyde-dextran via an amino group artificially introduced in the 3' end of the oligonucleotide probe is reported in this work. The method is based on the use of hetero-functional-dextran as a long and multifunctional spacer arm covalently attached to an aminated surface capable of immobilizing DNA oligonucleotides. The immobilization occurred only via the amino introduced in the 3' end of the probe, with no implication of the DNA bases in the immobilization, ensuring that the full length of the probe is available for hybridization. These plates having immobilized oligonucleotide probes are able to hybridize complementary DNA target molecules. The tailor-made hetero-functional aldehyde-aspartic-dextran together with the chemical blocking of the remaining primary amino groups on the support using acetic anhydride avoid the nonspecific adsorption of DNA on the surface of the plates. Using these activated plates, (studying the effect of the probe concentration, temperature, and time of the plate activation on the achieved signal), thus, the covalent immobilization of the aminated DNA probe was optimized, and the sensitivity obtained was similar to that achieved using commercial biotin-streptavidin systems. The new DNA plates are stable under very drastic experimental conditions (90% formamide, at 100 degrees C for 30 min or in 100 mM NaOH).     

Whole-cell hybridization of Methanosarcina cells with two new oligonucleotide probes.

Two new oligonucleotide probes targeting the 16S rRNA of the methanogenic genus Methanosarcina were developed. The probes have the following sequences (Escherichia coli numbering): probe SARCI551, 5'-GAC CCAATAATCACGATCAC-3', and probe SARCI645, 5'-TCCCGGTTCCAAGTCTGGC-3'. In situ hybridization with the fluorescently labelled probes required several modifications of standard procedures. Cells of Methanosarcina mazeii S-6 were found to lyse during the hybridization step if fixed in 3% formaldehyde and stored in 50% ethanol. Lysis was, however, not observed with cells fixed and stored in 1.6% formaldehyde-0.85% NaCl. Extensive autofluorescence of the cells was found upon hybridization in the presence of 5 mM EDTA, but successful hybridization could be obtained without addition of this compound. The mounting agent Citifluor AF1, often used in conjugation with the fluorochrome fluorescein, was found to wash the labelled probes out of the cells. Stable labelling could be obtained with rhodamine-labelled probes when the specimen was mounted in immersion oil, and high hybridization intensities of the Methanosarcina cells were found even in the presence of biomass from an anaerobic reactor. The inherent high autofluorescence of the biomass could be lowered by use of a highly specific narrow-band filter. The probes were found to be specific for Methanosarcina and useful for detection of this genus in samples from anaerobic reactors.     

A fluorescence polarization assay using oligonucleotide probes for the rapid detection of verotoxin-producing Escherichia coli

A hybridization assay using fluorescence polarization was combined with the asymmetric polymerase chain reaction (PCR) in a method for the detection of the verotoxin type 2 gene of verotoxin-producing Escherichia coli. Six oligonucleotide probes labeled with FITC were designed and evaluated. One of these gave a detection limit of 10(3) colony forming units per assay, and assay results could be obtained within 5 min after PCR. It appears that the detection limit was restricted mainly by the extent and fidelity of PCR amplification, rather than by the sensitivity of the fluorescence polarization technique, indicating that good probe design facilitates the rapid detection of the PCR product. The fluorescence polarization assay, in conjunction with DNA amplification by PCR, is a powerful and widely applicable method for the rapid and sensitive detection of oligonucleotide sequences.     

Signal amplification of padlock probes by rolling circle replication.

Circularizing oligonucleotide probes (padlock probes) have the potential to detect sets of gene sequences with high specificity and excellent selectivity for sequence variants, but sensitivity of detection has been limiting. By using a rolling circle replication (RCR) mechanism, circularized but not unreacted probes can yield a powerful signal amplification. We demonstrate here that in order for the reaction to proceed efficiently, the probes must be released from the topological link that forms with target molecules upon hybridization and ligation. If the target strand has a nearby free 3' end, then the probe-target hybrids can be displaced by the polymerase used for replication. The displaced probe can then slip off the targetstrand and a rolling circle amplification is initiated. Alternatively, the target sequence itself can prime an RCR after its non-base paired 3' end has been removed by exonucleolytic activity. We found the Phi29 DNA polymerase to be superior to the Klenow fragment in displacing the target DNA strand, and it maintained the polymerization reaction for at least 12 h, yielding an extension product that represents several thousand-fold the length of the padlock probe.     

Spreadsheet software for thermodynamic melting point prediction of oligonucleotide hybridization with and without mismatches

The use of thermodynamic parameters for the calculation of oligonucleotide duplex stability provides the best estimates of oligonucleotide melting temperatures (Tm). Such estimates can be used for evidence-based design of molecular biological experiments in which oligonucleotide melting behavior is a critical issue, such as temperature or denaturing gradient gel electrophoreses, Southern blotting or hybridization probe assays on the LightCycler. We have developed a user friendly program for Tm calculation of matched and mismatched probes using the spreadsheet software Microsoft Excel. The most recently published values for entropy and enthalpy of Watson-Crick paris are used, and salt and oligonucleotide concentrations are considered. The 5' and 3' end stability is calculated for the estimation of primer specificity. In addition, the influence of all possible mutations under a given probe can be calculated automatically. The experimental evaluation of predicted Tm with the LightCycler, based on 14 hybridization probes for different gene loci, showed an excellent fit between measured results and values predicted with the thermodynamic model in 14 matched, 25 single mismatched and 8 two-point mismatched assays (r = 0.98; Sy. x = 0.90; y = 1.01 x -0.38). This program is extremely useful for the design of oligonucleotide probes because the use of probes that do not discriminate with a reasonable Tm difference between wild-type and mutation can be avoided in advance.     

probeBase: an online resource for rRNA-targeted oligonucleotide probes

Ribosomal RNA-(rRNA)-targeted oligonucleotide probes are widely used for culture-independent identification of microorganisms in environmental and clinical samples. ProbeBase is a comprehensive database containing more than 700 published rRNA-targeted oligonucleotide probe sequences (status August 2002) with supporting bibliographic and biological annotation that can be accessed through the internet at http://www.probebase.net. Each oligonucleotide probe entry contains information on target organisms, target molecule (small- or large-subunit rRNA) and position, G+C content, predicted melting temperature, molecular weight, necessity of competitor probes, and the reference that originally described the oligonucleotide probe, including a link to the respective abstract at PubMed. In addition, probes successfully used for fluorescence in situ hybridization (FISH) are highlighted and the recommended hybridization conditions are listed. ProbeBase also offers difference alignments for 16S rRNA-targeted probes by using the probe match tool of the ARB software and the latest small-subunit rRNA ARB database (release June 2002). The option to directly submit probe sequences to the probe match tool of the Ribosomal Database Project II (RDP-II) further allows one to extract supplementary information on probe specificities. The two main features of probeBase, 'search probeBase' and 'find probe set', help researchers to find suitable, published oligonucleotide probes for microorganisms of interest or for rRNA gene sequences submitted by the user. Furthermore, the 'search target site' option provides guidance for the development of new FISH probes.     

Bifunctional oligonucleotide probes synthesized using a novel CPG support are able to detect single base pair mutations.

A novel multifunctional controlled pore glass, MF-CPG (Fig. 1), has been synthesized and used to incorporate 3' terminal primary aliphatic amines into synthetic oligonucleotides. MF-CPG consists of a unique succinic acid linking arm which possesses both a masked primary amine for label attachment and a dimethoxytrityl protected hydroxyl for nucleotide chain elongation. Using MF-CPG, we have devised a simple and convenient technique to attach non-radioactive labels to the 3' terminus of oligonucleotides. Bifunctional probes can then be constructed by 32P labeling the 5' terminus with T4 kinase and gamma 32P-ATP. Using such bifunctional oligonucleotide probes in conjunction with polymerase chain reaction (PCR) amplification, we were able to detect single base substitutions in a target segment of the human H-ras protooncogene employing either functionality. Our technique thus expands the potential applications for oligonucleotides as hybridization probes.     

Optimization of reverse hybridization in microplates coated with rRNA targeted oligonucleotide probes

Among the modern molecular techniques for the identification of microorganisms the most straightforward way is through direct hybridization with rRNA/rDNA targeted probes. In this study, the optimization of the experimental procedures for the reverse hybridization technique in 96-well microplates is described using both synthetic model oligonucleotides (18 b) and amplified DNA (app. 4500 bp). Three different types of plates were compared (Maxi Sorp, NucleoLink, CovaLink). Plates made from nonchemically modified polystyrene which are conventionally used in immunoassays (MaxiSorp) proved to be an economic alternative for plates offering chemically modified tailor-made surfaces. Phosphorylation of the oligonucleotide probe was not necessary for successful immobilization whereas with 5'-terminal hexa-deoxyadenosine tailed capture oligonucleotides an enhanced sensitivity of the assay was observed. Variation of the stringency by adjusting different concentrations of formamide during the washing step ensures high probe specificity and therefore allows reliable identification of the microorganisms. The assay can be performed in less than 4 hours using pre-coated plates which can be stored for several weeks. After dissociation of the target DNA/capture probe duplex with an alkaline denaturing solution rehybridization is possible.