High concentrations of fatty acids affect the lipase treatment of softwood thermomechanical pulps

Triglycerides, a major class of wood extractives, contribute to the colloidal pitch that initiates pitch deposits. Because industrial or pilot-scale treatments with lipolytic enzymes to reduce triglyceride concentrations in pulp have not been successful in North America, we investigated such treatments at a laboratory scale. Different batches of industrial softwood chemithermomechanical pulps (CTMP) were treated with a range of concentrations of two commercial lipases: Resinase A 2X (Novo Nordisk AG) and Lipidase 10 000 (American Laboratories Inc.). A pilot-scale thermomechanical pulp (TMP) made from the same wood as the CTMP, but without the sodium hydrosulfite used in the CTMP, was also treated with the lipases. While triglycerides decreased in all the pulp treatments, the extent of their hydrolysis varied according to the ratio of triglyceride to the fatty/resin acid fraction. As this ratio can vary significantly in softwood TMP and CTMP, the success of industrial treatments of softwood mechanical pulps by commercial lipases may be related to variations in this ratio. Supporting this, adding linoleic acid to an extractives-free pulp that was spiked with olive oil reduced lipase activity by up to 55%. Received: 7 August 1997 / Received last revision: 8 December 1997 / Accepted: 14 December 1997     

Factors affecting the activation of pulps with laccase

Activation of fibres by radical formation is the first step when aiming at oxidative coupling of new functional groups on the fibre bound lignin. In this work, factors affecting the amount of phenoxy radicals created to unbleached TMP, CTMP, softwood kraft and hardwood kraft pulp fibres in the laccase catalysed oxidation were determined by EPR. Laccase was able to catalyse the oxidation of all the pulps studied. The reactivity of the pulp was found to be affected by both the physical accessibility of lignin in the fibres and the chemistry of the surface lignin accessible to laccase. Laccase dosage, use of extra oxygen in the laccase catalysed radicalization reaction, treatment time and also the amount and type of low-molecular weight compounds (LMWC) present in the pulp were all found to contribute to the radical content of pulp fibres measured after the enzymatic reaction. It could not been excluded that two types of reactions take place during the radical formation in fibres. Within the fibre matrix there may be both fibre material bound and soluble lignin fragments differing with respect to accessibility, molecular weight or chemical structure which can be radicalized at various rates, and the formed radicals may also undergo cross-coupling reactions reducing the amount of the total radicals.     

The Carboxy-Terminal Modulator Protein (CTMP) Regulates Mitochondrial Dynamics

Background

Mitochondria are central to the metabolism of cells and participate in many regulatory and signaling events. They are looked upon as dynamic tubular networks. We showed recently that the Carboxy-Terminal Modulator Protein (CTMP) is a mitochondrial protein that may be released into the cytosol under apoptotic conditions.

Methodology/Principal Findings

Here we report an unexpected function of CTMP in mitochondrial homeostasis. In this study, both full length CTMP, and a CTMP mutant refractory to N-terminal cleavage and leading to an immature protein promote clustering of spherical mitochondria, suggesting a role for CTMP in the fission process. Indeed, cellular depletion of CTMP led to accumulation of swollen and interconnected mitochondria, without affecting the mitochondrial fusion process. Importantly, in vivo results support the relevance of these findings, as mitochondria from livers of adult CTMP knockout mice had a similar phenotype to cells depleted of CTMP.

Conclusions/Significance

Together, these results lead us to propose that CTMP has a major function in mitochondrial dynamics and could be involved in the regulation of mitochondrial functions.     

Increased water resistance of CTMP fibers by oat (Avena sativa L.) husk lignin

The insertion of oat husk lignin onto chemithermomechanical pulp (CTMP) fibers was studied to increase fiber hydrophobicity. The pretreated pulp samples were subsequently used for preparation of handsheets for characterization. Treatment of CTMP with laccase in the presence of oat husk lignin resulted in a significant increase in hydrophobicity of the handsheet surface, as indicated by dynamic contact angle analysis. Water absorption time of 8 s was obtained with initial contact angle of 118°. Although the handsheet's brightness was reduced by 33%, tensile index was only subtly decreased. Neither laccase nor oat husk lignin alone gave much improved water absorption times. Therefore, handsheets made of laccase-treated pulp with and without oat husk lignin were further examined by XPS, which suggested that both laccase and oat husk lignin were inserted onto CTMP fibers. The oat husk lignin was distributed as heterogeneous aggregates on the handsheet surface whereas laccase was uniformly distributed. Evidence was obtained that the adsorbed laccase layer formed a noncovalent base for the insertion of oat husk lignin onto fiber surfaces.     

Laccase-Catalyzed Surface Modification of Thermo-Mechanical Pulp (TMP) for the Production of Wood Fiber Insulation Boards Using Industrial Process Water

Low-density wood fiber insulation boards are traditionally manufactured in a wet process using a closed water circuit (process water). The water of these industrial processes contains natural phenolic extractives, aside from small amounts of admixtures (e.g., binders and paraffin). The suitability of two fungal laccases and one bacterial laccase was determined by biochemical characterization considering stability and substrate spectra. In a series of laboratory scale experiments, the selected commercial laccase from Myceliophtora thermophila was used to catalyze the surface modification of thermo-mechanical pulp (TMP) using process water. The laccase catalyzed the covalent binding of the phenolic compounds of the process water onto the wood fiber surface and led to change of the surface chemistry directly via crosslinking of lignin moieties. Although a complete substitution of the binder was not accomplished by laccase, the combined use of laccase and latex significantly improved the mechanical strength properties of wood fiber boards. The enzymatically-treated TMP showed better interactions with the synthetic binder, as shown by FTIR-analysis. Moreover, the enzyme is extensively stable in the process water and the approach requires no fresh water as well as no cost-intensive mediator. By applying a second-order polynomial model in combination with the genetic algorithm (GA), the required amount of laccase and synthetic latex could be optimized enabling the reduction of the binder by 40%.     

Inhibition of neutrophil adhesion by pectic galacturonans

The inhibition of the adhesion of neutrophils to fibronectin by the fragments of the main galacturonan chain of the following pectins was demonstrated: comaruman from the marsh cinquefoil Comarum polustre, bergenan from the Siberian tea Bergenia crassifolia), lemnan from the duckweed Lemna minor), zosteran from the eelgrass Zostera marina), and citrus pectin. The parent pectins, except for comaruman, did not affect the cell adhesion. Galacturonans prepared from the starting pectins by acidic hydrolysis were shown to reduce the neutrophil adhesion stimulated by phorbol 12-myristate 13-acetate (1.625 μM) and dithiothreitol (0.5 mM) at a concentration of 50–200 μg/ml. The presence of carbohydrate chains with molecular masses higher than 300, from 100 to 300, and from 50 to 100 kDa in the galacturonan fractions was proved by membrane ultrafiltration.     

Activity of laccase on unbleached and bleached thermomechanical pulp

The introduction of value-added properties to pulp fibres is an attractive proposition. One interesting option is targeted modification of fibre surfaces by enzymatic activation. In this work, the activity of laccase on pulp and pulp fractions from thermomechanical pulp (TMP) and peroxide bleached TMP was studied on the basis of consumption of the co-substrate oxygen in the reaction and by studying the formation of radicals in the pulp material as analysed by electron paramagnetic resonance spectroscopy (EPR). Laccases obtained from Trametes hirsuta and Myceliophthora thermophila were used in the study. Laccases were found to be active on pulp material of unbleached TMP, whereas only fines from bleached TMP reacted in laccase treatment. Dissolved and colloidal substances (DCS) were assumed to have a mediating role in the laccase-catalysed oxidation of the fibre-bound material.     

Using municipal biosolids in combination with other residuals to restore metal-contaminated mining areas

High metal waste materials from historic mining at the Bunker Hill, Idaho (ID) Superfund site was amended with a range of materials including municipal biosolids, woody debris, wood ash, pulp and paper sludge, and compost. The existing soil or waste material has elevated metal concentrations with total Zn, Pb and Cd ranging from 6000 to 14700, 2100 to 27000 and 9 to 28 mg kg^–1, respectively. Surface application of certain amendments including biosolids mixed with wood ash resulted in significant decreases in subsoil acidity as well as subsoil extractable metals. This mixture was sufficient to restore a plant cover to the contaminated areas. At the Bunker Hill site, a surface application of high N biosolids (44 or 66 tons ha^–1) in combination with wood ash (220 tons ha^–1) with or without log yard debris (20% by volume) or pulp and paper sludge (44 tons ha^–1) was able to restore a vegetative cover to the metal contaminated materials for 2 years following amendment application. Plant biomass in 1999 was 0.01 mg ha^–1 in the control versus a mean of 3.4 tons ha^–1 in the residual amended plots. Metal concentrations of the vegetation indicated that plants were within normal concentrations for the 2 years that data were collected. Surface application of amendments was also able to reduce Ca(NO₃)₂ extractable Zn in the subsoil from about 50 mg kg^–1in the control to less than 4 mg kg^–1in two of the treatments. Use of conventional amendments including lime alone and microbial stimulants were not sufficient to support plant growth. These results indicate that surface application of biosolids in combination with other residuals is sufficient to restore a vegetative cover to high metal mine wastes.     

Extracting hemicelluloses prior to aspen chemi-thermomechanical pulping: Effects of pre-extraction on pulp properties

Pre-extraction of hemicelluloses prior to pulping and conversion of the extracted hemicelluloses to other by-products will provide additional revenues to traditional pulp and paper industry. The effects of hemicelluloses pre-extraction with sulfuric acid on aspen (Populus tremuloides) chemi-thermomechanical pulp (CTMP) properties were investigated in this study. The sulfuric acid pre-extraction resulted in a release of 11% of hemicelluloses (determined as xylan) and acetic acid, especially at the second press-impregnation stage. Compared with CTMP without acid pre-extraction, the acid pre-extraction significantly reduced refining energy to a given freeness, and the pulps produced from acid pre-extracted chips have lower shives, higher strength properties except zero-span breaking length, lower bulk, but lower brightness at a similar specific refining energy. This study provides useful information for integration of biorefinery in mechanical pulp mills in the future.     

Use of a fluorescence labelled,carbohydrate-binding module from Phanerochaete chrysosporium Cel7D for studying wood cell wall ultrastructure

The -amino group of the carbohydrate-binding module (CBM) from Phanerochaete chrysosporium cellulase Cel7D was covalently labelled with fluorescein isothiocyanate. The fluorescein-labelled CBM was characterised regarding substrate binding, showing specificity only to cellulose and not to mannan and xylan. Conjugation of fluorescein isothiocyanate to CBM did not affect its binding to cellulose. The labelled CBM was successfully used as a probe for detecting cellulose in lignocellulose material such as never dried spruce and birch wood as well as pulp fibres.     

Synthesis of σ-π-phosphinidene sulfide complexes [Mn2(CO)n(μ-η,η-P(NR2)S)] (n = 8, 9) via direct sulfuration of electrophilic μ-phosphinidenes and photochemical transformation to a trigonal prismatic Mn2P2S2 cluster

The μ-phosphinidene complexes [Mn₂(CO)₈{μ-P(TMP)}] (1) (TMP = tetramethylpiperidyl) and [Mn₂(CO)₈{μ-P(NⁱPr₂)}] (2) react with elemental sulfur to form rare phosphinidene sulfide complexes [Mn₂(CO)₉{μ-η¹,η²-P(TMP)S}] (3) and [Mn₂(CO)₈{μ-η¹,η²-P(NⁱPr₂)S}] (4), respectively. Photolysis of 3 results in the unprecedented conversion to [Mn₂(CO)₆(μ-{κPκ²S}₂-(TMP)(S)P-P(S)(TMP)] (5), which contains a novel 10-electron donor diphosphene disulfide ligand (TMP)(S)P-P(S)(TMP).     

Enhanced production of tetramethylpyrazine in <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> BL1 by <Emphasis Type="Italic">bdhA</Emphasis> disruption and 2,3-butanediol supplementation

The 2,3-butanediol (2,3-BD) dehydrogenase gene (bdhA) of Bacillus licheniformis BL1 was disrupted to construct the tetramethylpyrazine (TMP)-producing BLA strain. During microaerobic fermentation, the bdhA-disrupted BLA strain produced 46.98 g TMP/l, and this yield was 23.99 % higher than that produced by the parent BL1 strain. In addition, the yield of acetoin, which is a TMP precursor, also increased by 28.98 % in BLA. The TMP production by BL1 was enhanced by supplementing the fermentation medium with 2,3-BD. The yield of TMP improved from 37.89 to 44.77 g/l as the concentration of 2,3-BD increased from 0 to 2 g/l. The maximum TMP and acetoin yields increased by 18.16 and 17.87 %, respectively with the increase in 2,3-BD concentration from 0 to 2 g/l. However, no increase was observed when the concentration of 2,3-BD in the matrix was ≥3 g/l. This study provides a valuable strategy to enhance TMP and acetoin productivity of mutagenic strains by gene manipulation and optimizing fermentation conditions.     

Trimethoprim Induces Heat Shock Proteins and Protein Aggregation in <Emphasis Type="Italic">E. coli</Emphasis> Cells

Trimethoprim (TMP), an inhibitor of dihydrofolate reductase, decreases the level of tetrahydrofolate supplying one-carbon units for biosynthesis of nucleotides, proteins, and panthotenate. We have demonstrated for the first time that one of the effects of the TMP action in E. coli cells is protein aggregation and induction of heat shock proteins (Hsps). TMP caused induction of DnaK, DnaJ, GroEL, ClpB, and IbpA/B Hsps. Among these Hsps, IbpA/B were most efficiently induced by TMP and coaggregated with the insoluble proteins. Upon folate stress, deletion of the ibpA/B operon resulted in increased protein aggregation but did not influence cell viability.Received: 29 October 2002/Accepted: 6 December 2002     

Tetramethylpyrazine inhibits CoCl2‐induced neurotoxicity through enhancement of Nrf2/GCLc/GSH and suppression of HIF1α/NOX2/ROS pathways

Hypoxia‐mediated neurotoxicity contributes to various neurodegenerative disorders, including Alzheimer's disease and multiple sclerosis. Tetramethylpyrazine (TMP), a major bioactive component purified from Ligusticum wallichii Franchat, exhibited potent neuroprotective effect. However, the mechanism of TMP‐exerted neuroprotective effect against hypoxia was not clear. In the study, we investigated the mechanism of the neuroprotective effect of TMP against hypoxia induced by CoCl₂ in vitro and in vivo. The results showed that TMP could protect against CoCl₂‐induced neurotoxicity in PC12 cells and in rats, as evidenced by enhancement of cell viability in PC12 cells and improvement of learning and memory ability in rats treated with CoCl₂. TMP could inhibit mitochondrial dysfunction, mitochondrial apoptotic molecular events, and thus apoptosis induced by CoCl₂. TMP inhibited CoCl₂‐increased reactive oxygen species (ROS) level, which may contribute to hypoxia‐related neurotoxicity induced by CoCl₂. The antioxidant and neuroprotective activities of TMP involved two pathways: one was the enhancement of nuclear factor erythroid 2‐related factor 2 (Nrf2)/catalytic subunit of γ‐glutamylcysteine ligase‐mediated regulation of GSH and the other was the inhibition of hypoxia‐inducible factor 1 α/NADPH oxidase 2 (NOX2)‐mediated ROS generation. These two pathways contributed to improvement of oxidative stress and thus the amelioration of apoptosis under hypoxic conditions. These results have appointed a new path toward the understanding of pathogenesis and TMP‐related therapy of hypoxia‐related neurodegenerative diseases.

     

Synthesis of novel water-soluble sulfonated cellulose

Water-soluble sulfonated cellulose (SC) samples were synthesized by oxidizing hardwood kraft pulp with sodium periodate followed by the sulfonation reaction with sodium bisulfite. Six levels of oxidation/sulfonation were obtained by using different mmols (0.93-4.67) of periodate per gram of pulp. The aldehyde and sulfonic acid contents, surface morphology, and water solubility property of these treated fibers were characterized. It was found that carbonyl group content increased with the periodate charge and so did the sulfonic acid content in subsequent sulfonation step. Scanning electron microscopy images showed a significant change in surface morphology of the sulfonated samples. Solubility of sulfonated cellulose in water was determined from ¹H NMR spectra and a solubility of 28.57 g/L was found when cellulose was oxidized with 4.67 mmol periodate per gram cellulose followed by the sulfonation reaction.     

Delignification of wood pulp by a thermostable xylanase from Bacillus stearothermophilus strain T-6

During the bleaching of wood pulp for the paper industry, large amounts of chlorinated aromatic compounds are produced and released into the environment. These compounds are extremely toxic and are a major source of pollution. The paper and pulp industry is seeking for alternative methods for bleaching pulp. One such method involves the use of hemicellulases to release the colored lignohemicellulose. We have isolated and characterized several thermophilic bacteria which produce xylanases. One such strain, T-6, produced high levels of extracellular xylanase, free of cellulase and proteinase activities. Strain T-6 was classified as a strain of Bacillus stearothermophilus and was able to grow on defined medium containing xylose, methionine and asparagine at 65 °C. Xylanase activity was induced by either xylose or xylan; no activity was detected with other carbon sources, such as glycerol, acetate, lactose, glucose, maltose, fructose, mannose, galactose or sucrose. Xylanase constitutive mutants were obtained following mutagenesis and detection on p-nitrophenol -d-xylopyranoside containing agar plates. Xylanase T-6 was produced on large scale, and was purified and concentrated by a single adsorption-desorption step from a cation exchanger. The overall purification yield of a 1000 liter fermentation was 45%, resulting in a 98% pure enzyme. Xylanase T-6 was shown to partially remove lignin from unbleached pulp at 65 °C and pH 9.0, without loss in pulp viscosity. The enzyme-treated pulp was used to make handsheets that had higher brightness than untreated pulp.     

Fungal bio-treatment of spruce wood with Trametes versicolor for pitch control: influence on extractive contents, pulping process parameters, paper quality and effluent toxicity

Lipophilic low molar-mass constituents in wood chips for the paper industry result in low quality pulp, pitch deposition, and effluent toxicity. New biotechnological solutions such as fungal pre-treatment of wood chips can reduce pitch problems. This laboratory-scale study focuses on the potential and limitations of a fungal bio-treatment of Norway spruce chips with the white-rot fungus Trametes versicolor. Different fungal treatment conditions were compared. A 4-week fungal treatment reduced the concentration of resin acids and triglycerides by 40% and 100%, respectively, but neither lowered the energy requirements of the TMP process nor significantly affected the morphological fiber characteristics and the physical pulp properties. The pre-treatment led to slightly poorer optical properties. The Trametes versicolor fungal treatment contributed to a less toxic effluent and improved the biodegradability. A treatment of 2-3 weeks appears optimal.     

Interactions of thiamine monophosphate (TMP) with one- and two-dimensional polymeric halogenomercurate anions. Crystal structures of (TMP)(Hg2Br5)·0.5H2O and (TMP)2(Hg3I8)

An investigation into the interactions between thiamine monophosphate (TMP) and anions has resulted in the preparation and X-ray characterization of the compounds (TMP)(Hg₂Br₅)·0.5H₂O (1) and (TMP)₂(Hg₃I₈) (2). In each compound the TMP molecule exists as a monovalent cation in the usual F conformation. The halogenomercurate anions occur in two-dimensional (2-D) network in 1 or one-dimensional (1-D) chain in 2. In both 1 and 2, the structures consist of alternating cationic sheets of the hydrogen-bonded TMP molecules and anionic sheets of the polymeric halogenomercurate anions. The TMP molecule binds to the polymeric anions through the characteristic ‘anion bridge I’, C(2)H?X?pyrimidinium (X=Br in 1 and I in 2), and electrostatic interactions between electropositive S(1) and halogen atoms. The ‘anion bridge II’ of the type N(4′1)H?X?thiazolium (X=phosphate group) plays a role in stabilizing the molecular conformation. The biological implication of the host-guest-like complexation between TMP and polymeric anions is discussed.     

Laccase mediator systems for eco-friendly production of medium-density fiberboard (MDF) on a pilot scale: physicochemical analysis of the reaction mechanism

Increasing prices of petrochemical resins and possible harmful formaldehyde emissions from conventionally produced wood composites have resulted in increased interest in enzymatic binder systems as environmentally friendly alternatives for gluing lignocellulosic products. In this study, laccase mediator systems (LMSs) were used to activate lignin on wood fiber surfaces in the pilot-scale production of medium-density fiberboard (MDF) using a dry process. Three different mediators were applied: 4-hydroxybenzoic acid (HBA), 1-hydroxybenzotriazole (HBT), and acetosyringone (AS) of which HBA performed best. The mechanical properties of the manufactured boards produced with thermomechanical pulp (TMP) fibers, laccase, and HBA fulfilled all required European standards for wood-based panels. Oxygen consumption rates of the different LMSs and (13)C NMR spectroscopy results for treated TMP fibers were obtained for qualitative and quantitative analysis of lignin activation. The results show that reactions were most effective within the first 30 min of incubation. Oxygen consumption was fastest and highest for the LMS using HBA. (13)C NMR spectroscopy indicated the highest decrease of aromatic groups in the wood fiber lignin with this LMS. The data correlated well with the quality of the MDF. The required enzymatic reaction times allowed direct integration of the LMS into standard MDF production techniques. The results indicate that application of LMSs has a high potential for environmentally friendly MDF production.