尖吻蝮蛇毒无出血活性纤维蛋白溶解酶的纯化及其理化性质研究

尖吻蝮蛇毒纤维蛋白溶解酶是一种具有纤维蛋白溶解活性的蛋白水解酶 ,常具有出血活性 ,因此 ,寻找具有纤维蛋白溶解活性 ,又无出血活性的纤维蛋白溶解酶十分必要。作者对尖吻蝮蛇毒无出血活性纤维蛋白溶解酶(NHFLE)进行了分离纯化及其理化性质的研究。应用凝胶过滤和离子交换柱层析法分离纯化收集具有酶活性的蛋白峰 ,用 1 2 % SDS-聚丙烯酰胺凝胶电泳作纯度鉴定和测定纤维蛋白溶解酶的相对分子量 ,采用纤维蛋白平板法测定活性。结果从尖吻蝮蛇毒 NHFLE的分离纯化得的单一峰纤维蛋白溶解酶为单一条带 ,其相对分子量为 2 50 0 0 ,没有…     

Eglin C与2709碱性蛋白酶相互作用分析及亲和纯化方法

Eglin C是来自水蛭中的一种小型热稳定蛋白质,属于马铃薯胰凝乳蛋白酶抑制剂家族,可以抑制弹性蛋白酶、枯草杆菌蛋白酶、组织蛋白酶、α-lytic蛋白酶以及胰凝乳蛋白酶等.然而,利用eglin C纯化蛋白酶,尚未见研究报道.本文将化学合成的编码eglin C及其突变体的基因序列,克隆到原核表达载体pQE30,在大肠杆菌...     

地鳖纤溶活性蛋白的纯化及性质研究

通过硫酸铵分段沉淀、DEAE-纤维素柱和SephadexG-75柱层析从雌地鳖(Eupolyphagesinensiswalker)体内分离纯化到一种相对分子质量约为41.3kD的纤溶活性蛋白,纤维蛋白平板测定表明,该蛋白具有纤溶作用,经SDS-PAGE电泳显示为一条带,含糖量为10.5%。其水解纤维蛋白的比活力为547.86u/mg。该成分受蛋白抑制剂和丝氨酸蛋白酶抑制剂PMSF的抑制,但EDTA对其影响不大,提示该成分属于丝氨酸蛋白酶类。该成分在40℃下基本稳定,最适温度40℃,最适pH为8.0,其激活纤维蛋白溶解酶(PLG)的机制与尿激酶(UK)有一定区别。推测其可能是一种新的地鳖纤溶酶组分。     

血纤维蛋白水解酶的研究进展

血纤维蛋白溶解酶是一类能直接降解血纤维蛋白的酶,在体外其主要来源于微生物、蚯蚓、蛇毒、某些海洋无脊椎动物和海藻等。使用外源的、能直接降解纤维蛋白的酶类可加强血浆纤溶活性,从而达到理想的溶栓效果。这方面的研究在理论研究和治疗学两方面,都有一定的意义。本文综述了这类酶的来源、结构、理化性质、药理作用及临床应用前景。     

血纤维蛋白水解酶的研究进展

血纤维蛋白溶解酶是一类能直接降解血纤维蛋白的酶,在体外其主要来源于微生物、蚯蚓、蛇毒、某些海洋无脊椎动物和海藻等。使用外源的、能直接降解纤维蛋白的酶类可加强血浆纤溶活性,从而达到理想的溶栓效果。这方面的研究在理论研究和治疗学两方面,都有一定的意义。本文综述了这类酶的来源、结构、理化性质、药理作用及临床应用前景。     

光交联聚氨酯作载体的固定化细胞产生a-淀粉酶的研究

将可光交联的聚氨酯预聚物与枯草杆菌细胞悬浮液混匀后经紫外光照射交联,制得固定化细胞,用于产生a-淀粉酶。探讨了交联和固定化条件对裁体结构和固定化细胞产酶性能的影响,研究了这种固定化细胞的使用特性。结果表明:光交联聚氨酯能有效地固定枯草杆菌细胞,进行正常增殖和产酶,改变交联和固定化条件能调节载体的孔容、孔径和比表面,从而调节固定化细胞的产酶性能和其它使用特性;枯草杆菌经光交联聚氮酯载体固定化后对温度和pH的适应性提高,在同样条件下,这种固定化细胞的产酶能力比游离细胞提高约30％,亦高于用k-角叉菜胶作载体的固定化细胞．     

一株产纤溶酶凝结芽孢杆菌的筛选及其生物学特性

为了筛选性能良好的产纤溶酶菌株,本研究通过脱脂乳平板及纤维蛋白平板双层筛选从传统发酵食品豆豉中,分离到1株具有溶解纤维蛋白能力的凝结芽孢杆菌(Bacillus coagulans) HQ-1。分析其发酵上清液中纤溶酶的纤溶能力、组成特征和作用方式,并研究菌株HQ-1生物学特性。结果表明:菌株HQ-1发酵上清液中的纤溶酶活力为383.1 U/mL;Native-PAGE实验表明HQ-1发酵上清液中能溶解纤维蛋白的纤溶酶组分仅有一种,并且通过激活纤溶酶原实现HQ-1降解纤维蛋白。HQ-1生物学特性实验表明:菌株HQ-1对阿莫西林等11种常见抗生素敏感;对沙门氏菌、大肠杆菌和金黄色葡萄球菌的抑制作用显著。菌株HQ-1产纤溶酶活性及稳定性较好,具有潜在开发价值,本研究结果为产纤溶酶微生物资源的开发提供理论依据。     

枯草杆菌弹性蛋白酶高产菌株的筛选与鉴定

从稻草中初筛出14株具有溶解弹性蛋白作用的G＋产芽孢杆菌,经分离纯化筛选诱变,并进行生理生化鉴定后,得到2株产酶活较高的枯草芽孢杆菌B．subtilis HW236-5和HW245－1,作为是制备抗动脉粥样硬化枯草杆菌弹性酶的产酶菌株。     

用色原及凝溶试验法测定组织型血纤维蛋白溶酶原激活剂(TPA)的效价

<正>组织型血纤维蛋白溶酶原激活剂(TPA)是一种限定特异性的丝氨酸蛋白酶,它是纤维蛋白溶酶系统最重要的生理激活剂。在血纤维蛋白存在时,TPA催化酶原纤维蛋白溶酶原转化成它的活性形式,血纤维蛋白溶酶。在体内,血纤维蛋白溶酶的主要目标是纤维蛋白。纤维蛋白溶解方面的最新进展导致了免疫反应TPA和催化部位TPA的敏感试验法的发展。测量催化活性的TPA试验似乎依赖于纤维蛋白原/纤维蛋白碎片的存在,这些碎片是用溴化     

急性心肌梗死的静脉溶栓治疗

80年代以来 ,急性心肌梗死 ( AMI)的治疗进入再灌注治疗年代 ,其中静脉溶栓治疗应用最为广泛。因其简便易行 ,适合基层医院开展 ,也可在院外及时溶栓争取时间 ,降低 AMI的病死率 ,现将近年来静脉溶栓治疗 AMI的研究状况综述如下。1　溶栓概念　　溶栓是用药物使结合于纤维蛋白的纤维蛋白溶酶原激活成纤维蛋白溶酶 ,促使纤维蛋白的溶解 ,即溶栓作用。溶栓治疗就是给予纤溶酶原活化因子 ,通过它们激活血液的纤溶系统达到溶解血栓的作用。2溶栓剂　　 ( 1 )尿激酶 ( UK)是国内首选的纤溶剂 ,它可催化纤溶酶转化为纤溶酶原的活化因子 ,无抗…     

产脂肪酶粘质沙雷氏菌发酵产酶条件的优化

目的：通过对产脂肪酶粘质沙雷氏菌发酵条件的优化,使其酶活力得到大幅度提高。方法：用响应面法对产脂肪酶粘质沙雷氏菌的发酵产酶培养条件进行了优化。首先通过逐因子实验考察了该菌株产酶所需的最适碳源和氮源,在此基础上通过Plackett-burman法设计实验,考察了几种因素对产酶影响的大小,然后用最陡爬坡实验逼近以上几种因子的最大响应区域后,采用Box-Behnken设计25组实验,并利用Design-Expert对实验结果进行二次回归分析。结果：对产酶具有显著效应的4个因素为：蛋白胨、CaCl2、吐温、大豆油。实验优化到最佳的产酶条件为：糊精1%,蛋白胨0.7%、CaCl20.3%、吐温-80 1.68%、大豆油1.81%、K2HPO40.05%、MgSO40.05%、FeSO40.1%。结论：优化后发酵液上清的脂肪酶活力可达97.52U/ml,比优化前提高了10倍。     

麦芽糖诱导软化芽孢杆菌α-环糊精葡萄糖基转移酶在枯草杆菌中的表达

通过PCR扩增软化芽孢杆菌α-环糊精葡萄糖基转移酶基因,将基因片段克隆到大肠杆菌-枯草杆菌穿梭载体pGJ103中,转化枯草杆菌WB600得基因工程菌进行外源表达。在1.5%的麦芽糖初始发酵培养基上摇瓶培养,48 h后重组枯草杆菌产酶活性为6.1U/ml。通过单因素分析和响应面分析对重组枯草杆菌产CGT酶摇瓶发酵条件进行优化。分析得到培养基关键组分麦芽糖,玉米淀粉和酵母粉三者最佳浓度分别为:15.5g/L,13g/L和20g/L。在此条件下,摇瓶培养36h后α-CGT酶活性为17.6U/ml,5L罐分批发酵30h后酶活达到20U/ml (水解活性为1.4×10⁴ IU/ml)。     

产脂肪酶细菌RYXP的诱变选育及突变株产酶条件优化

以"凤丹"牡丹根际土壤中分离筛选到的产脂肪酶菌株Pseudomonas sp. RYXP作为出发菌株,对其进行了紫外线诱变选育,并采用单因素试验和正交试验方法对活性最强正突变株的产脂肪酶基本特性进行了测定。结果表明,出发菌株Pseudomonas sp. RYXP的紫外线诱变最佳条件为:15 W紫外灯30 cm距离照射1 min;将产脂肪酶活性最强的正突变菌株编号为RYXP-3,单因素试验表明RYXP-3产脂肪酶适宜的碳源为玉米淀粉,适宜氮源为豆饼粉,适宜的磷酸二氢钾含量是0.3%,适宜的初始pH值为7;正交试验表明RYXP-3的最佳的产酶培养基成分组成是:玉米淀粉7%,豆饼粉3%,磷酸二氢钾0.3%,初始pH值为8。在优化方案A1B2C2D3产酶条件下,突变株RYXP-3最高的产酶活性达到56.1 U/mL。突变菌株RYXP-3可作为产油牡丹"凤丹"专用促生菌肥开发的备选资源菌株。     

漆酶高产菌株的诱变选育及其产酶条件

以粗毛栓菌Trametesgallica为出发菌,通过紫外诱变处理其担孢子、PDA-RBBR平板变色法初筛、ABTS法测定培养液漆酶酶活力复筛,获得1株漆酶高产诱变菌株SAH-12。用高氮低碳无机盐培养液(LM3)培养时,其峰值酶活力比出发菌株高出4倍,达到5002.6U/L,且产酶稳定。对SAH-12液体培养产酶条件的研究表明:以纤维二糖和蔗糖为碳源明显优于麦麸、淀粉和葡萄糖,其最高酶活分别达18526U/L和13436U/L;有机氮源较无机氮源更有利于SAH-12漆酶的分泌,以蛋白胨、大豆粕和胰化蛋白胨为氮源时其峰值酶活分别达到20544U/L、19671U/L和16180U/L;适宜初始培养pH为4.0;ABTS、单宁酸、没食子酸对产酶均有明显的诱导作用,其中ABTS和单宁酸的诱导效果相对更好,愈创木酚和吐温80对产酶有一定的抑制作用。     

Efficient production of protopectinases by Bacillus subtilis using medium based on soybean flour

We have developed a culture system for efficient production of protopectinases (PPases) by Bacillus subtilis. PPase shows the pectin-releasing activity and is expected to be utilized in the enzymatic cotton scouring. B. subtilis IFO3134 was cultivated using defatted soybean flour as a main component of culture media. This strain produced three different types of PPases, namely, PPase-C, -N and -R performing endo-arabinase activity, pectate-lyase activity and pectin-lyase activity, respectively. The effects of alkaline solubilization and autoclave treatments to extract nutrients from soybean flour and initial soybean flour concentration (20-80g/l) on production of PPases in batch fermentation were investigated. Alkaline solubilization of soybean flour with NaOH remarkably reduced enzyme productivity. In addition, a higher initial concentration of soybean flour reduced the enzyme productivity of cells. The pectin-releasing activity was the largest and reached up to 2200-2400U/ml, when the culture medium containing an initial soybean flour concentration of 40g/l was autoclaved for 45-60min without alkaline solubilization treatment.     

里氏木霉Trichoderma reesei产纤维素酶的发酵培养基碳氮源优化

研究C、N源对里氏木霉(Trichoderma reesei)生产纤维素酶的影响,采用单因素实验方法和中心复合方法对发酵培养基进行优化。单因素实验表明:黄豆饼粉、玉米芯、玉米浆对纤维素酶的影响显著。通过响应面优化,得到最优培养基C、N源的组成:黄豆饼粉32.21 g/L,玉米芯42.29 g/L,玉米浆4.45 g/L。优化条件下,摇瓶发酵7 d的比酶活达到(10.65±0.50)U/mL。     

毛壳霉CQ31的鉴定及固体发酵产木聚糖酶条件的优化

从土壤中筛选出一株产木聚糖酶的真菌CQ31, 经鉴定后命名为毛壳霉CQ31。该菌能够利用几种农业废弃物固体发酵高产木聚糖酶, 玉米杆为最佳碳源。单因素优化试验表明: 以玉米杆为碳源, 胰蛋白胨为氮源, 初始水分含量80%, 初始pH值9.0为最佳产酶条件。在优化后的条件下培养7 d产木聚糖酶水平高达4897 U/g干基碳源, 此时甘露聚糖酶酶活达803 U/g干基碳源。因此, 毛壳霉CQ31固体发酵产木聚糖酶和甘露聚糖酶具有一定的工业化应用前景。     

Production of a novel polygalacturonic acid bioflocculant REA-11 by Corynebacterium glutamicum

The production of a novel polygalacturonic acid bioflocculant REA-11 from a newly isolated strain, Corynebacterium glutamicum CCTCC M201005, was investigated. Sucrose was chosen as a carbon source for REA-11 production. Complex nitrogen sources containing urea and an organic nitrogen compound enhanced both bacterial growth and REA-11 production, among which urea plus corn steep liquor was shown to be the most efficient combination. A cost-effective medium for REA-11 production mainly comprised 17 g/l sucrose, 0.45 g/l urea, and 5 ml/l corn steep liquor, under which conditions the flocculating activity reached 390 U/ml. The molar ratio of carbon to nitrogen (C/N) significantly affected REA-11 production, where a C/N ratio of 20:1 was shown to be the best. Interestingly, by simultaneously feeding sucrose and urea at a C/N ratio of 20:1 at 24 h of fermentation, REA-11 production (458 U/ml) was enhanced by 17% compared to the control. In a 10 l jar fermentor, lower dissolved oxygen tension was favorable for REA-11 production: a flocculating activity of 520 U/ml was achieved at a kappaLa of 100 h(-1). REA-11 raw product is relatively thermo-stable at acidic pH ranges of 3.0-6.5. Preliminary application studies showed that REA-11 had stronger flocculating activity to Kaolin clay suspension compared to chemical flocculants. In addition, the capability of decolorizing molasses wastewater indicates the industrial potential of this novel bioflocculant.     

Does protein kinase C activation mediate thrombin-induced arachidonate release in human platelets?

Thrombin stimulated rapid formation of diacylglycerol, inositol 1,4,5-trisphosphate (IP3) and thromboxane B2 (TXB2) in human platelets. Formation of diacylglycerol and IP3 appeared to precede that of TXB2. Activation of protein kinase C by diacylglycerol combining with Ca+2 mobilization by IP3 has been implicated in mediating arachidonate release. However, addition of the protein kinase C inhibitor 1-(5-isoquinolinylsulfonyl)-2-methylpiperazine (H-7) to platelet suspension did not inhibit thrombin-stimulated arachidonate release and TXB2 synthesis, whereas addition of the Ca+2 antagonist, 3,4,5-trimethoxybenzoic acid 8-(diethylamino) octyl ester (TMB-8) or the calmodulin antagonist N-(6-aminohexyl)-5-chloro-1-naphthalenesulfonamide (W-7) abolished arachidonate release. The correlation of IP3 production with arachidonate release on increasing the concentrations of thrombin was further examined. IP3 production reached near maximum at 0.2 U/ml, whereas TXB2 synthesis continued to increase at 1 U/ml. These results suggest that protein kinase C activation may not mediate arachidonate release and that Ca+2 mobilization by IP3 may only partially account for arachidonate release in platelets stimulated with relatively high concentrations of thrombin.     

Medium optimization for the production of thermal stable beta-glucanase by Bacillus subtilis ZJF-1A5 using response surface methodology

Polysaccharides, such as barley flour, dextrin and soluble starch, were better carbon sources than monosaccharides and disaccharides, such as glucose and maltose, for cell growth of Bacillus subtilis ZJF-1A5 and beta-glucanase production. beta-Glucanase produced by B. subtilis ZJF-1A5 was associated partially with cell growth and increased significantly when cells entered stationary phase; yeast extract was the best nitrogen source, followed by soybean flour. All inorganic nitrogen sources chosen in the experiments were not favorable for cell growth and enzyme production. A fractional factorial design (2(6-2)) was applied to elucidate medium components that significantly affect beta-glucanase production. The concentration of barley flour, corn flour and soybean flour in medium were significant factors. The steepest ascent method was used to locate the optimal domain and a central composite design was used to estimate the quadratic response surface from which the factor levels for maximum production of beta-glucanase were determined. The composition of fermentation medium optimized with response surface methodology was (g/l): barley flour, 63.5; corn flour, 44.8; KH2PO4, 1.0; MgSO4 x 7H2O, 0.1; CaCl2, 0.1. beta-Glucanase activity was 251 U/ml at 48 h using optimized medium, 1.4 times higher than that in original medium.