P-selectin glycoprotein ligand-1 decameric repeats regulate selectin-dependent rolling under flow conditions

P-selectin glycoprotein ligand-1 (PSGL-1) interacts with selectins to support leukocyte rolling along vascular wall. L- and P-selectin bind to N-terminal tyrosine sulfate residues and to core-2 O-glycans attached to Thr-57, whereas tyrosine sulfation is not required for E-selectin binding. PSGL-1 extracellular domain contains decameric repeats, which extend L- and P-selectin binding sites far above the plasma membrane. We hypothesized that decamers may play a role in regulating PSGL-1 interactions with selectins. Chinese hamster ovary cells expressing wild-type PSGL-1 or PSGL-1 molecules exhibiting deletion or substitution of decamers with the tandem repeats of platelet glycoprotein Ibalpha were compared in their ability to roll on selectins and to bind soluble L- or P-selectin. Deletion of decamers abrogated soluble L-selectin binding and cell rolling on L-selectin, whereas their substitution partially reversed these diminutions. P-selectin-dependent interactions with PSGL-1 were less affected by decamer deletion. Videomicroscopy analysis showed that decamers are required to stabilize L-selectin-dependent rolling. Importantly, adhesion assays performed on recombinant decamers demonstrated that they directly bind to E-selectin and promote slow rolling. Our results indicate that the role of decamers is to extend PSGL-1 N terminus far above the cell surface to support and stabilize leukocyte rolling on L- or P-selectin. In addition, they function as a cell adhesion receptor, which supports approximately 80% of E-selectin-dependent rolling.     

P-selectin must extend a sufficient length from the plasma membrane to mediate rolling of neutrophils

Under physiological shear stress, neutrophils roll on P-selectin on activated endothelial cells or platelets through interactions with P- selectin glycoprotein ligand-1 (PSGL-1). Both P-selectin and PSGL-1 are extended molecules. Human P-selectin contains an NH2-terminal lectin domain, an EGF domain, nine consensus repeats (CRs), a transmembrane domain, and a cytoplasmic tail. To determine whether the length of P- selectin affected its interactions with PSGL-1, we examined the adhesion of neutrophils to CHO cells expressing membrane-anchored P- selectin constructs in which various numbers of CRs were deleted. Under static conditions, neutrophils attached equivalently to wild-type P- selectin and to constructs containing from 2-6 CRs. Under shear stress, neutrophils attached equivalently to wild-type and 6 CR P-selectin and nearly as well to 5 CR P-selectin. However, fewer neutrophils attached to the 4 CR construct, and those that did attach rolled faster and were more readily detached by increasing shear stress. Flowing neutrophils failed to attach to the 3 CR and 2 CR constructs. Neutrophils attached and rolled more efficiently on 4 CR P-selectin expressed on glycosylation-defective Lec8 CHO cells, which have less glycocalyx. We conclude that P-selectin must project its lectin domain well above the membrane to mediate optimal attachment of neutrophils under shear forces. The length of P-selectin may: (a) facilitate interactions with PSGL-1 on flowing neutrophils, and (b) increase the intermembrane distance where specific bonds form, minimizing contacts between the glycocalyces that result in cell-cell repulsion.     

IL-12, STAT4-dependent up-regulation of CD4(+) T cell core 2 beta-1,6-n-acetylglucosaminyltransferase, an enzyme essential for biosynthesis of P-selectin ligands

TCR activation of naive T cells in the presence of IL-12 drives polarization toward a Th1 phenotype and synthesis of P- and E-selectin ligands. Fucosyltransferase VII (Fuc-T VII) and core 2 beta-1,6-N-acetylglucosaminyltransferase (C2GnT) are critical for biosynthesis of selectin ligands. P-selectin glycoprotein ligand-1 is the best characterized ligand for P-selectin and also binds E-selectin. The contributions of TCR and cytokine signaling pathways to up-regulate Fuc-T VII and C2GnT during biosynthesis of E- and P-selectin ligands, such as P-selectin glycoprotein ligand 1, are unknown. IL-12 signals via the STAT4 pathway. Here, naive DO11.10 TCR transgenic and STAT4(-/-) TCR transgenic CD4(+) T cells were stimulated with Ag and IL-12 (Th1 condition), IL-4 (Th2), or neutralizing anti-IL-4 mAb only (Th0). The levels of Fuc-T VII and C2GnT mRNA in these cells were compared with their adhesive interactions with P- and E-selectin in vitro under flow. The data show IL-12/STAT4 signaling is necessary for induction of C2GnT, but not Fuc-TVII mRNA, and that STAT4(-/-) Th1 cells do not traffic normally to sites of inflammation in vivo, do not interact with P-selectin, and exhibit a partial reduction of E-selectin interactions under shear stress in vitro. Ag-specific TCR activation in CD4(+) T cells was sufficient to trigger induction of Fuc-TVII, but not C2GnT, mRNA and expression of E-selectin, but not P-selectin, ligands. Thus, Fuc-T VII and C2GnT are regulated by different signals during Th cell differentiation, and both cytokine and TCR signals are necessary for the expression of E- and P-selectin ligands.     

Lectin domain peptides from selectins interact with both cell surface ligands and Ca2+ ions.

Selectins are receptors that mediate leukocyte adhesion to platelets or endothelial cells through Ca(2+)-dependent interactions with cell surface oligosaccharides. We found that peptides corresponding to residues 23-30, 54-63, and 70-79 of the N-terminal lectin domain of P-selectin inhibited leukocyte adhesion to P-selectin. Peptides corresponding to the homologous 23-30 and 54-63 regions of E-selectin and L-selectin also prevented cell binding to P-selectin. Immobilized albumin conjugates of the three P-selectin peptides supported adhesion of myeloid cells and certain other cells expressing fucosylated oligosaccharides. Ca2+ was required for optimal cell adhesion to the conjugates containing the 23-30 and 54-63 sequences. Furthermore, Ca2+ interacted with the 23-30 and 54-63 peptides of all three selectins, as detected by changes in intrinsic fluorescence emission intensity. These data suggest that residues contained within the 23-30 and 54-63 regions of the selectins represent contact sites for carbohydrate structures on target cells. Furthermore, binding of Ca2+ to these sequences may directly enhance their ability to interact with cell surface ligands.     

Identification of Novel Contributions to High-affinity Glycoprotein-Receptor Interactions using Engineered Ligands

Engineered receptor fragments and glycoprotein ligands employed in different assay formats have been used to dissect the basis for the dramatic enhancement of binding of two model membrane receptors, dendritic cell-specific intercellular adhesion molecule 3-grabbing nonintegrin (DC-SIGN) and the macrophage galactose lectin, to glycoprotein ligands compared to simple sugars. These approaches make it possible to quantify the importance of two major factors that combine to enhance the affinity of single carbohydrate-recognition domains (CRDs) for glycoprotein ligands by 100-to 300-fold. First, the presence of extended binding sites within a single CRD can enhance interaction with branched glycans, resulting in increases of fivefold to 20-fold in affinity. Second, presentation of glycans on a glycoprotein surface increases affinity by 15-to 20-fold, possibly due to low-specificity interactions with the surface of the protein or restriction in the conformation of the glycans. In contrast, when solution-phase networking is avoided, enhancement due to binding of multiple branches of a glycan to multiple CRDs in the oligomeric forms of these receptors is minimal and binding of a receptor oligomer to multiple glycans on a single glycoprotein makes only a twofold contribution to overall affinity. Thus, in these cases, multivalent interactions of individual glycoproteins with individual receptor oligomers have a limited role in achieving high affinity. These findings, combined with considerations of membrane receptor geometry, are consistent with the idea that further enhancement of the binding to multivalent glycoprotein ligands requires interaction of multiple receptor oligomers with the ligands.     

Tyrosine sulfation enhances but is not required for PSGL-1 rolling adhesion on P-selectin

P-selectin glycoprotein ligand-1 (PSGL-1) is a large (240 kDa) glycoprotein found on the surface of nearly all leukocytes. The mature molecule is decorated with multiple N- and O-linked glycans and displays copies of the tetrasaccharide sialyl-Lewis(x) (sLe(X)), as well as a cluster of three tyrosine sulfate (tyr-SO(3)) groups near the N-terminus of the processed protein. Previous studies have suggested that PSGL-1 needs to be tyrosine-sulfated, in addition to glycosylated with sLe(X), to successfully interact with P-selectin. To better understand how biochemical features of the PSGL-1 ligand are related to its adhesion phenotype, we have measured the dynamics of adhesion under flow of a series of well-defined PSGL-1 variants that differ in their biochemical modification, to both P- and E-selectin-coated substrates. These variants are distinct PSGL-1 peptides: one that possesses sLe(X) in conjunction with three N-terminal tyr-SO(3) groups (SGP3), one that possesses sLe(X) without tyrosine sulfation (GP1), and one that lacks sLe(X) but has three N-terminal tyr-SO(3) groups (SP3). Although all peptides expressing sLe(X), tyr-SO(3), or both supported some form of rolling adhesion on P-selectin, only peptides expressing sLe(X) groups showed rolling adhesion on E-selectin. On P-selectin, the PSGL-1 peptides demonstrated a decreasing strength of adhesion in the following order: SGP3 > GP1 > SP3. Robust, rolling adhesion on P-selectin was mediated by the GP1 peptide, despite its lack of tyrosine sulfation. However, the addition of tyrosine sulfation to glycosylated peptides (SGP3) creates a super ligand for P-selectin that supports slower rolling adhesion at all shear rates and supports rolling adhesion at much higher shear rates. Tyrosine sulfation has no similar effect on PSGL-1 rolling on E-selectin. Such functional distinctions in rolling dynamics are uniquely realized with a cell-free system, which permits precise, unambiguous identification of the functional activity of adhesive ligands. These findings are consistent with structural and functional characterizations of the interactions between these peptides and E- and P-selectin published recently.     

Expression of P-selectin at low site density promotes selective attachment of eosinophils over neutrophils

The selective interaction of neutrophils with E-selectin and eosinophils with P-selectin has been previously reported, but the relevance of selectin site density and fluid shear has not been studied in detail. We have developed a new approach to examine these interactions in cell suspensions that integrates an on-line cone-plate viscometer with a flow cytometer. We find that eosinophils and neutrophils both use P-selectin glycoprotein ligand-1 to form stable conjugates with P-selectin Chinese hamster ovary cell transfectants, with a preferential adhesion of eosinophils. Further, the difference in cell adhesion between neutrophils and eosinophils is magnified at P-selectin expression levels below approximately 20 sites/microm2, a range likely to be relevant to endothelial cell expression levels in conditions associated with eosinophilia. The unique behavior is retained over shear rates ranging from 100 to 1500/s but is magnified at low shear. Results from parallel-plate flow chamber assays suggest that preferential eosinophil adhesion reflects an enhanced efficiency of initial PSGL-1 bond formation with P-selectin rather than a unique ability of eosinophils to mediate rolling interactions of longer duration on low-density P-selectin substrates. These differences may account in part for the increase in eosinophil accumulation in allergic diseases.     

Quantifying the effects of molecular orientation and length on two-dimensional receptor-ligand binding kinetics

Surface presentation of adhesion receptors influences cell adhesion, although the mechanisms underlying these effects are not well understood. We used a micropipette adhesion frequency assay to quantify how the molecular orientation and length of adhesion receptors on the cell membrane affected two-dimensional kinetic rates of interactions with surface ligands. Interactions of P-selectin, E-selectin, and CD16A with their respective ligands or antibody were used to demonstrate such effects. Randomizing the orientation of the adhesion receptor or lowering its ligand- and antibody-binding domain above the cell membrane lowered two-dimensional affinities of the molecular interactions by reducing the forward rates but not the reverse rates. In contrast, the soluble antibody bound with similar three-dimensional affinities to cell-bound P-selectin constructs regardless of their orientation and length. These results demonstrate that the orientation and length of an adhesion receptor influences its rate of encountering and binding a surface ligand but does not subsequently affect the stability of binding.     

P-selectin mediates metastatic progression through binding to sulfatides on tumor cells

Hematogenous carcinoma metastasis is associated with tumor cell emboli formation, which is now known to be facilitated by selectins. P-selectin-mediated interactions of platelets with cancer cells are based mostly on mucin- and glycosaminoglycan-type selectin ligands. We previously showed that mouse colon carcinoma cells (MC-38) carry P-selectin ligands of nonmucin origin, which were not identified. Here we show that P-selectin ligands recognized on MC-38 cells are sulfated glycolipids, thereby facilitating experimental metastasis in a syngeneic mouse model. Metabolic inhibition of sulfation by incubation of cells with sodium chlorate almost completely abrogated P-selectin binding. Metabolic labeling of MC-38 cells with (35)S sulfate revealed only a single band as detected by high-performance thin layer chromatography analysis of a total lipid extract. Matrix-assisted laser desorption/ionization tandem time-of-flight/time-of-flight analysis (MALDI-TOF-TOF) analysis of the purified sulfate-containing lipid fraction identified the selectin ligand to be a sulfated galactosylceramide SM4 (HSO(3)-3Galbeta-1Cer). Modulation of glycolipid biosynthesis in MC-38 cells altered P-selectin binding, thereby confirming sulfoglycolipids to be major P-selectin ligands. In addition, P-selectin was also found to recognize lactosylceramide sulfate SM3 (HSO(3)-3Galbeta-4Glcbeta-1Cer) and gangliotriaosylceramide sulfate SM2 [GalNAcbeta-4(HSO(3)-3)Galbeta-4Glcbeta-1Cer] in human hepatoma cells. Finally, the enzymatic removal of sulfation from the cell surface of MC-38 cells resulted in decreased P-selectin binding and led to attenuation of metastasis. Thus, SM4 sulfatide serves as a native ligand for P-selectin contributing to cell-cell interactions and to facilitation of metastasis.     

Uncharged P-selectin blockers

The blocking potency of P- and L-selectin was studied for certain small molecule mannosides and their polyacrylamide (PAA, 30 kDa) conjugates in comparison to SiaLe(x) and fucoidan. Two experimental systems were used: (1) solid phase static assay based on recombinant selectins, and (2) P-selectin dependent rat peritoneal inflammation. betaMan-SC6H4NO2- p was four times more potent P-selectin inhibitor as compared to SiaLe(x). Docking of this molecule onto the P-selectin carbohydrate-binding site demonstrated that a nitro group enabled an electrostatic interaction with residue Lys 84, while the phenyl ring and the CH2 at C-6 contacted the CH2 groups of the same Lys residue. In vivo, betaMan-SC6H4NO2- p blocked experimental inflammation better than SiaLe(x), but significantly lower than fucoidan. In vitro Man-polyacrylic acid conjugates appeared to be very potent inhibitors comparable to fucoidan, uncharged Man-PAA proved rather active, comparable to SiaLe(x)-PAA both in vitro, and in vivo, whereas mannan did not display any P-selectin blocking effect.     

Monospecific and common glycoprotein ligands for E- and P-selectin on myeloid cells

E- and P-selectin are inducible cell adhesion molecules on endothelial cells, which function as Ca(2+)-dependent lectins and mediate the binding of neutrophils and monocytes. We have recently identified a 150- kD glycoprotein ligand for E-selectin on mouse myeloid cells, using a recombinant antibody-like form of mouse E-selectin. Here, we report that this ligand does not bind to an analogous P-selectin fusion protein. Instead, the chimeric P-selectin-IgG protein recognizes a 160- kD glycoprotein on the mouse neutrophil progenitor 32D cl 3, on mature mouse neutrophils and on human HL60 cells. The binding is Ca(2+)- dependent and requires the presence of sialic acid on the ligand. This P-selectin-ligand is not recognized by E-selectin. Removal of N-linked carbohydrate side chains from the 150-kD and the 160-kD monospecific selectin ligands abolishes the binding of both ligands to the respective selectin. Treatment of HL60 cells with Peptide: N- glycosidase F inhibited cell binding to P- and E-selectin. In addition, glycoproteins of 230 and 130 kD were found on mature mouse neutrophils, which bound both to E- and P-selectin in a Ca(2+)-dependent fashion. The signals detected for these ligands were 15-20-fold weaker than those for the monospecific ligands. Both proteins were heavily sialylated and selectin-binding was blocked by removal of sialic acid, but not by removal of N-linked carbohydrates. Our data reveal that E- and P-selectin recognize two categories of glycoprotein ligands: one type requires N-linked carbohydrates for binding and is monospecific for each of the two selectins and the other type binds independent of N- linked carbohydrates and is common for both endothelial selectins.     

Single molecule characterization of P-selectin/ligand binding

P-selectin expressed on activated platelets and vascular endothelium mediates adhesive interactions to polymorphonuclear leukocytes (PMNs) and colon carcinomas critical to the processes of inflammation and blood-borne metastasis, respectively. How the overall adhesiveness (i.e. the avidity) of receptor/ligand interactions is controlled by the affinity of the individual receptors to single ligands is not well understood. Using single molecule force spectroscopy, we probed in situ both the tensile strength and off-rate of single P-selectin molecules binding to single ligands on intact human PMNs and metastatic colon carcinomas and compared them to the overall avidity of these cells for P-selectin substrates. The use of intact cells rather than purified proteins ensures the proper orientation and preserves post-translational modifications of the P-selectin ligands. The P-selectin/PSGL-1 interaction on PMNs was able to withstand forces up to 175 pN and had an unstressed off-rate of 0.20 s(-1). The tensile strength of P-selectin binding to a novel O-linked, sialylated protease-sensitive ligand on LS174T colon carcinomas approached 125 pN, whereas the unstressed off-rate was 2.78 s(-1). Monte Carlo simulations of receptor/ligand bond rupture under constant loading rate for both P-selectin/PSGL-1 and P-selectin/LS174T ligand binding give distributions and mean rupture forces that are in accord with experimental data. The pronounced differences in the affinity for P-selectin/ligand binding provide a mechanistic basis for the differential abilities of PMNs and carcinomas to roll on P-selectin substrates under blood flow conditions and underline the requirement for single molecule affinity measurements.     

Angiotensin II type 1 receptor signaling contributes to platelet-leukocyte-endothelial cell interactions in the cerebral microvasculature

Angiotensin II type 1 (AT(1)) receptor signaling has been implicated in cerebral microvascular alterations associated with ischemia, diabetes mellitus, hypercholesterolemia, and atherosclerosis. Platelets, which express AT(1) receptors, also appear to contribute to the thrombogenic and inflammatory responses that are elicited by these pathological conditions. This study assesses the role of AT(1) receptor activation on platelet-leukocyte-endothelial cell interactions elicited in cerebral microvasculature by ischemia and reperfusion. Intravital microscopy was used to monitor the adhesion of platelets and leukocytes that were labeled with different fluorochromes, whereas dihydrorhodamine-123 was used to quantify oxygen radical production in cerebral surface of mice that were either treated with the AT(1) receptor agonist Val-angiotensin II (ANG II) or subjected to bilateral common carotid artery occlusion (BCCAO) followed by reperfusion. ANG II elicited a dose- and time- dependent increase in platelet-leukocyte-endothelial cell interactions in cerebral venules that included rolling platelets, adherent platelets on the leukocytes and the endothelial cells, rolling leukocytes, and adherent leukocytes. All of these interactions were attenuated by treatment with either P-selectin or P-selectin glycoprotein ligand 1 (PSGL-1) antibody. The AT(1) receptor antagonist candesartan and losartan as well as diphenyleneiodonium, an inhibitor of flavoproteins including NAD(P)H oxidase, significantly reduced the platelet-leukocyte-endothelial cell interactions elicited by either ANG II administration or BCCAO/reperfusion. The increased oxygen radical generation elicited by BCCAO/reperfusion was also attenuated by candesartan. These findings are consistent with an AT(1) receptor signaling mechanism, which involves oxygen radical production and ultimately results in P-selectin- and PSGL-1-mediated platelet-leukocyte-endothelial cell interactions in the cerebral microcirculation.     

Sialyl Lewis(x)-mediated, PSGL-1-independent rolling adhesion on P-selectin

Selectin-mediated cell adhesion is an essential component of the inflammatory response. In an attempt to unambiguously identify molecular features of ligands that are necessary to support rolling adhesion on P-selectin, we have used a reconstituted ("cell-free") system in which ligand-coated beads are perfused over soluble P-selectin surfaces. We find that beads coated with the saccharides sialyl Lewis(x) (sLe(x)), sialyl Lewis(a) (sLe(a)), and sulfated Lewis(x) (HSO(3)Le(x) support rolling adhesion on P-selectin surfaces. Although it has been suggested that glycosylation and sulfation of P-selectin glycoprotein ligand-1 (PSGL-1) is required for high-affinity binding and rolling on P-selectin, our findings indicate that sulfation of N-terminal tyrosine residues is not required for binding or rolling. However, beads coated with a tyrosine-sulfated, sLe(x)-modified, PSGL-1-Fc chimera support slower rolling on P-selectin than beads coated with sLe(x) alone, suggesting that sulfation improves rolling adhesion by modulating binding to P-selectin. In addition, we find it is not necessary that P-selectin carbohydrate ligands be multivalent for robust rolling to occur. Our results demonstrate that beads coated with monovalent sLe(x), exhibiting a more sparse distribution of carbohydrate than a similar amount of the multivalent form, are sufficient to yield rolling adhesion. The relative abilities of various ligands to support rolling on P-selectin are quantitatively examined among themselves and in comparison to human neutrophils. Using stop-time distributions, rolling dynamics at video frame rate resolution, and the average and variance of the rolling velocity, we find that P-selectin ligands display the following quantitative trend, in order of decreasing ability to support rolling adhesion on P-selectin: PSGL-1-Fc > sLe(a) approximately sLe(x) > HSO(3)Le(x).     

Polymerized liposome assemblies: bifunctional macromolecular selectin inhibitors mimicking physiological selectin ligands

Monomeric sialyl Lewis(X) (sLe(x)) and sLe(x)-like oligosaccharides are minimal structures capable of supporting selectin binding in vitro. However, their weak binding interactions do not correlate with the high-affinity binding interactions witnessed in vivo. The polyvalent display of carbohydrate groups found on cell surface glycoprotein structures may contribute to the enhanced binding strength of selectin-mediated adhesion. Detailed biochemical analyses of physiological selectin ligands have revealed a complicated composition of molecules that bind to the selectins in vivo and suggest that there are other requirements for tight binding beyond simple carbohydrate multimerization. In an effort to mimic the high-affinity binding, polyvalent scaffolds that contain multicomponent displays of selectin-binding ligands have been synthesized. Here, we demonstrate that the presentation of additional anionic functional groups in the form of sulfate esters, on a polymerized liposome surface containing a multimeric array of sLe(x)-like oligosaccharides, generates a highly potent, bifunctional macromolecular assembly. This assembly inhibits L-, E-, and P-selectin binding to GlyCAM-1, a physiological ligand better than sLe(x)-like liposomes without additional anionic charge. These multivalent arrays are 4 orders of magnitude better than the monovalent carbohydrate. Liposomes displaying 3'-sulfo Lewis(X)-like oligosaccharides, on the other hand, show slight loss of binding with introduction of additional anionic functional groups for E- and P-selectin and negligible change for L-selectin. The ability to rapidly and systematically vary the composition of these assemblies is a distinguishing feature of this methodology and may be applied to the study of other systems where composite binding determinants are important for high-affinity binding.     

Identification of a specific glycoprotein ligand for P-selectin (CD62) on myeloid cells

P-selectin (CD62, GMP-140, PADGEM), a Ca(2+)-dependent lectin on activated platelets and endothelium, functions as a receptor for myeloid cells by interacting with sialylated, fucosylated lactosaminoglycans. P-selectin binds to a limited number of protease-sensitive sites on myeloid cells, but the protein(s) that carry the glycans recognized by P-selectin are unknown. Blotting of neutrophil or HL-60 cell membrane extracts with [125I]P-selectin and affinity chromatography of [3H]glucosamine-labeled HL-60 cell extracts were used to identify P-selectin ligands. A major ligand was identified with an approximately 250,000 M(r) under nonreducing conditions and approximately 120,000 under reducing conditions. Binding of P-selectin to the ligand was Ca2+ dependent and was blocked by mAbs to P-selectin. Brief sialidase digestion of the ligand increased its apparent molecular weight; however, prolonged digestion abolished binding of P-selectin. Peptide:N-glycosidase F treatment reduced the apparent molecular weight of the ligand by approximately 3,000 but did not affect P-selectin binding. Western blot and immunodepletion experiments indicated that the ligand was not lamp-1, lamp-2, or L-selectin, which carry sialyl Le(x), nor was it leukosialin, a heavily sialylated glycoprotein of similar molecular weight. The preferential interaction of the ligand with P-selectin suggests that it may play a role in adhesion of myeloid cells to activated platelets and endothelial cells.     

Forces Required to Initiate Membrane Tether Extrusion from Cell Surface Depend on Cell Type But Not on the Surface Molecule

When a cell adhered to another cell or substratum via surface proteins is forced to detach, lipid membrane tethers are often extruded from the cell surface before the protein bond dissociates. For example, during the inflammatory reaction leukocytes roll on the surface of activated endothelial cells. The rolling adhesion is mediated by interactions of selectins with their ligands, e.g., P-selectin glycoprotein ligand (PSGL)-1, which extrudes membrane tethers from the surfaces of both leukocytes and endothelial cells. Membrane tether extrusion has been suggested to regulate leukocyte rolling. Here we examine several factors that may affect forces required to initiate membrane tethers, or initial tether force. It was found that initial tether forces were similar regardless of the presence or absence of the cytoplasmic tail of P-selectin and regardless of whether the tethers were extruded via binding to PSGL-1 or Fcγ receptors. Initial tether forces were found to depend on the cell types tested and were greatly reduced by treatment of latrunculin A, which inhibits actin polymerization. These data provide additional insights to the control of membrane tether extrusion, which should be taken into account when cellular functions such as rolling where tether extrusion plays a regulatory role are compared using different cell types expressing the same molecule.     

Endoglycan, a member of the CD34 family of sialomucins, is a ligand for the vascular selectins

The interactions of the selectin family of adhesion molecules with their ligands are essential for the initial rolling stage of leukocyte trafficking. Under inflammatory conditions, the vascular selectins, E- and P-selectin, are expressed on activated vessels and interact with carbohydrate-based ligands on the leukocyte surface. While several ligands have been characterized on human T cells, monocytes and neutrophils, there is limited information concerning ligands on B cells. Endoglycan (EG) together with CD34 and podocalyxin comprise the CD34 family of sialomucins. We found that EG, previously implicated as an L-selectin ligand on endothelial cells, was present on human B cells, T cells and peripheral blood monocytes. Upon activation of B cells, EG increased with a concurrent decrease in PSGL-1. Expression of EG on T cells remained constant under the same conditions. We further found that native EG from several sources (a B cell line, a monocyte line and human tonsils) was reactive with HECA-452, a mAb that recognizes sialyl Lewis X and related structures. Moreover, immunopurified EG from these sources was able to bind to P-selectin and where tested E-selectin. This interaction was divalent cation-dependent and required sialylation of EG. Finally, an EG construct supported slow rolling of E- and P-selectin bearing cells in a sialic acid and fucose dependent manner, and the introduction of intact EG into a B cell line facilitated rolling interactions on a P-selectin substratum. These in vitro findings indicate that EG can function as a ligand for the vascular selectins.     

Effect of ligand density on the spectral, physical, and biological characteristics of CdSe/ZnS quantum dots

Chemical modification of the surface of CdSe/ZnS quantum dots (QDs) with small molecules or functional ligands often alters the characteristics of these particles. For instance, dopamine conjugation quenches the fluorescence of the QDs, which is a property that can be exploited for sensing applications if the conjugates are taken up into living cells. However, different sizes and/or preparations of mercaptocarboxylic acid solubilized QDs show very different properties when incubated with cells. It is unknown what physical parameters determine a QDs ability to interact with a cell surface, be endocytosed, escape from endosomes, and/or enter the nucleus. In this study, we examine the surface chemistry of QD-dopamine conjugates and present an optimized method for tracking the attachment of small biomolecules to the surface. It is found that the fluorescence intensity, surface charge, colloidal stability, and biological interactions of the QDs vary as a function of the density of dopamine on the surface. Successful targeting of QD-dopamine to dopamine receptor positive PC12 cells correlates with greater homogeneity of particle thiol layer, and a minimum number of ligands required for specific association can be estimated. These results will enable users to develop methods for screening QD conjugates for biological activity before proceeding to experiments with cell lines and animals.     

L-selectin ligands expressed by human leukocytes are HECA-452 antibody-defined carbohydrate epitopes preferentially displayed by P-selectin glycoprotein ligand-1.

Leukocytes express L-selectin ligands critical for leukocyte-leukocyte interactions at sites of inflammation. The predominant leukocyte L-selectin ligand is P-selectin glycoprotein ligand-1 (PSGL-1), which displays appropriate sialyl Lewis x (sLex)-like carbohydrate determinants for L-selectin recognition. Among the sLex-like determinants expressed by human leukocytes is a unique carbohydrate epitope defined by the HECA-452 mAb. The HECA-452 Ag is a critical component of L-selectin ligands expressed by vascular endothelial cells. However, HECA-452 Ag expression on human leukocyte L-selectin ligands has not been assessed. In this study, the HECA-452 mAb blocked 88-99% of neutrophil rolling on, or attachment to, adherent cells expressing L-selectin in multiple experimental systems. A function-blocking anti-PSGL-1 mAb also inhibited L-selectin binding to neutrophils by 89-98%. In addition, the HECA-452 and anti-PSGL-1 mAbs blocked the majority of P-selectin binding to neutrophils. Western blot analysis revealed that PSGL-1 immunoprecipitated from neutrophils displayed HECA-452 mAb-reactive determinants and that PSGL-1 was the predominant scaffold for HECA-452 Ag display. Leukocyte L-selectin ligands also contained sulfated determinants since culturing ligand-bearing cells with NaClO3 abrogated L-selectin binding. Consistent with this, human neutrophils expressed mRNA encoding five different sulfotransferases associated with the generation of selectin ligands: CHST1, CHST2, CHST3, TPST1, and HEC-GlcNAc6ST. Therefore, the HECA-452-defined carbohydrate determinant displayed on PSGL-1 represented the predominant L-selectin and P-selectin ligand expressed by neutrophils.