A thermoalkaliphilic lipase of <Emphasis Type="Italic">Geobacillus</Emphasis> sp. T1

A thermoalkaliphilic T1 lipase gene of Geobacillus sp. strain T1 was overexpressed in pGEX vector in the prokaryotic system. Removal of the signal peptide improved protein solubility and promoted the binding of GST moiety to the glutathione-Sepharose column. High-yield purification of T1 lipase was achieved through two-step affinity chromatography with a final specific activity and yield of 958.2 U/mg and 51.5%, respectively. The molecular mass of T1 lipase was determined to be approximately 43 kDa by gel filtration chromatography. T1 lipase had an optimum temperature and pH of 70°C and pH 9, respectively. It was stable up to 65°C with a half-life of 5 h 15 min at pH 9. It was stable in the presence of 1 mM metal ions Na⁺, Ca²⁺, Mn²⁺, K⁺ and Mg²⁺ , but inhibited by Cu²⁺, Fe³⁺ and Zn²⁺. Tween 80 significantly enhanced T1 lipase activity. T1 lipase was active towards medium to long chain triacylglycerols (C10–C14) and various natural oils with a marked preference for trilaurin (C12) (triacylglycerol) and sunflower oil (natural oil). Serine and aspartate residues were involved in catalysis, as its activity was strongly inhibited by 5 mM PMSF and 1 mM Pepstatin. The T _m for T1 lipase was around 72.2°C, as revealed by denatured protein analysis of CD spectra.     

Secretory expression and characterization of a highly Ca-activated thermostable L2 lipase

Thermostable lipases are important biocatalysts, showing many interesting properties with industrial applications. Previously, a thermophilic Bacillus sp. strain L2 that produces a thermostable lipase was isolated. In this study, the gene encoding for mature thermostable L2 lipase was cloned into a Pichia pastoris expression vector. Under the control of the methanol-inducible alcohol oxidase (AOX) promoter, the recombinant L2 lipase was secreted into the culture medium driven by the Saccharomyces cerevisiae α-factor signal sequence. After optimization the maximum recombinant lipase activity achieved in shake flasks was 125 U/ml. The recombinant 44.5 kDa L2 lipase was purified 1.8-fold using affinity chromatography with 63.2% yield and a specific activity of 458.1 U/mg. Its activity was maximal at 70 °C and pH 8.0. Lipase activity increased 5-fold in the presence of Ca²⁺. L2 lipase showed a preference for medium to long chain triacylglycerols (C₁₀–C₁₆), corn oil, olive oil, soybean oil, and palm oil. Stabilization at high temperature and alkaline pH as well as its broad substrate specificity offer great potential for application in various industries that require high temperature operations.     

Factors that influence the extracellular expression of streptavidin in <Emphasis Type="Italic">Escherichia coli</Emphasis> using a bacteriocin release protein

Aiming to increase production of recombinant streptavidin in Escherichia coli, the effect of different leader sequences, different promoter strengths of the bacteriocin release protein (kil), host strain and medium composition on the expression and secretion into the medium was investigated. Expression vectors containing an expression or secretion unit were constructed with different combinations of leader sequence for the streptavidin gene and promoters for the kil gene and streptavidin gene. Results showed that a high-level extracellular production of streptavidin could be accomplished with E. coli BL21(DE3) by using the leader sequence of the phoA gene, a strong stationary-phase promoter for the kil gene and supplementation of the medium by glycine. Using a stationary-phase promoter for the expression of streptavidin had a negative effect.     

A novel organic solvent tolerant lipase from Bacillus sphaericus 205y: extracellular expression of a novel OST-lipase gene

An organic solvent tolerant (OST) lipase gene from Bacillus sphaericus 205y was successfully expressed extracellularly. The expressed lipase was purified using two steps purification; ultrafiltration and hydrophobic interaction chromatography (HIC) to 8-fold purity and 32% recovery. The purified 205y lipase revealed homogeneity on denaturing gel electrophoresis and the molecular mass was at approximately 30 kDa. The optimum pH for the purified 205y lipase was 7.0-8.0 and its stability showed a broad range of pH value between pH 5.0 to 13.0 at 37 degrees C. The purified 205y lipase exhibited an optimum temperature of 55 degrees C. The activity of the purified lipase was stimulated in the presence of Ca2+ and Mg2+. Ethylenediaminetetraacetic acid (EDTA) has no effect on its activity; however inhibition was observed with phenylmethane sulfonoyl fluoride (PMSF) a serine hydrolase inhibitor. Organic solvents such as dimethylsulfoxide (DMSO), methanol, p-xylene and n-decane enhanced the activity. Studies on the effect of oil showed that the lipase was most active in the presence of tricaprin (C10). The lipase exhibited 1,3 positional specificity. Keywords: Bacter     

A thermostable lipase produced by a newly isolated <Emphasis Type="Italic">Geotrichum</Emphasis>-like strain,R59

Growth and production of lipase by a new Geotrichum-like strain, R59, were studied. Production of extracellular lipase was substantially enhanced when the initial pH of the culture medium, types of carbon and nitrogen sources, substances probably stimulating the lipase biosynthesis, the temperature, and time of growth were optimized. Sucrose and triolein were the most effective carbon sources for lipase production. Maximum lipase activity (146 U/ml^–1) was obtained with urea as the nitrogen source. Growth at 30°C, an initial pH of 6.0 and incubation time of 48 h were found as optimum conditions for cell growth and production of lipase by Geotrichum-like strain R59. The enzyme was thermostable and exhibited very high activity after 1 h incubation at 60°C.     

Investigation of lipase production by a new isolate of Aspergillus sp.

Fungi isolated from soil were screened for exogenous lipolytic activity. The highest lipase activity was found in a new soil isolate of Aspergillus sp. Some optimal cultural parameters influencing the growth and production of extracellular lipase from this Aspergillus sp. were investigated. The lipase yield was maximum on day 4 of incubation of the culture at pH 5.5 and 30 °C. When the medium was prepared using olive oil as carbon source and peptone as a nitrogen source, better lipase yields were obtained. Aeration enhanced growth and lipase production.     

理性设计盐桥构建伯克霍尔德菌脂肪酶热稳定突变体

【目的】借助蛋白质工程技术提高伯克霍尔德菌ZYB002脂肪酶LipA的热稳定性,以期更好地将其应用于工业生产中。【方法】利用YASARA、Fold X、Rosetta、Gromacs等生物信息学软件,构建1个脂肪酶Lip A的热稳定性提高的微型突变体电子文库;通过对突变体的结构信息和自由能变化进行评估,筛选出潜在的有价值的突变体。继而利用基因定点突变技术,构建上述候选突变体的突变基因文库,通过实验筛选出热稳定性提高的脂肪酶LipA突变体。【结果】利用上述方法,从构建的20个脂肪酶LipA突变体中,筛选到热稳定性有显著提高的3个突变体LipA-Asn~(125)Asp、LipA-Asn~(125)Glu和LipA-Gln~(262)Glu。经55°C处理12 min后,上述3个突变体的T1250值较野生型分别提高4.0°C、5.5°C和4.4°C;在55°C下的半衰期较野生型分别提高了2.2倍、3.8倍和2.6倍。【结论】利用生物信息学软件,构建脂肪酶LipA突变体电子文库,结合蛋白质的结构信息,可以快速筛选到热稳定性提高的脂肪酶LipA突变体。     

Cloning, expression and characterization of an alkaline thermostable GH9 endoglucanase from Thermobifida halotolerans YIM 90462 T

The endoglucanase gene, thcel9A, from Thermobifida halotolerans YIM 90462^T was cloned and expressed in Escherichia coli BL 21(DE). The 2895-bp full-length gene encodes a 964-residue polypeptide (Thcel9A) containing a catalytic domain belonging to glycosyl hydrolases (GH) family 9. Phylogenetic analysis indicated that Thcel9A is closely related to Cel9A of Thermobifidafusca YX. Thcel9A was purified from the culture supernatant by Ni²⁺-affinity chromatography and the purified enzyme exhibited optimal activity at 55 °C and pH 8.0. Substrate specificity assays showed that it not only had CMCase activity, but also hydrolase activity on microcrystalline cellulose and filter paper. These properties suggested that Thcel9A is a classical GH9 group A endoglucanase.     

Cloning and expression in Escherichia coli of the Clostridium thermoaceticum gene encoding thermostable formyltetrahydrofolate synthetase

Formyltetrahydrofolate synthetase (FTHFS) (EC 6.3.4.3), a thermostable protein of four identical subunits from Clostridium thermoaceticum was cloned into Escherichia coli SK1592. The clone (CRL47) contained a 9.5 kb EcoRI fragment of C. thermoaceticum DNA ligated into pBR322. It produced catalytically active, thermostable FTHFS, that was not found in E. coli SK1592 containing native pBR322. The identity of the expressed enzyme was confirmed by specific binding of rabbit polyclonal anti-FTHFS serum produced against C. thermoaceticum FTHFS. The specific activities (mol·min^-1·mg^-1) of FTHFS in cell free extracts of CRL47 were 28–89 when assayed at 50°C and pH8. This was from 3–10-fold higher than in C. thermoaceticum extracts. FTHFS was purified to homogeneity from CRL47. The purified enzyme behaved during electrophoresis and gel chromatography and it had similar specific activity and thermostability as the enzyme purified from C. thermoaceticum.Abbreviations FTHFS formyltetrahydrofolate synthetase - kb kilobase - H₄-folate tetrahydrofolate - SDS sodium dodecyl sulfate A preliminary account of this work was presented at the annual meeting of the American Society for Microbiology, Atlanta, GA, 1987 (C. R. Lovell, A. Przybyla and L. G. Ljungdahl, Abstr. Annu. Meet. Am. Soc. Microbiol. 1987, K126, p. 223).     

Crystal structure of a thermostable lipase from Bacillus stearothermophilus P1

We describe the first lipase structure from a thermophilic organism. It shares less than 20% amino acid sequence identity with other lipases for which there are crystal structures, and shows significant insertions compared with the typical alpha/beta hydrolase canonical fold. The structure contains a zinc-binding site which is unique among all lipases with known structures, and which may play a role in enhancing thermal stability. Zinc binding is mediated by two histidine and two aspartic acid residues. These residues are present in comparable positions in the sequences of certain lipases for which there is as yet no crystal structural information, such as those from Staphylococcal species and Arabidopsis thaliana. The structure of Bacillus stearothermophilus P1 lipase provides a template for other thermostable lipases, and offers insight into mechanisms used to enhance thermal stability which may be of commercial value in engineering lipases for industrial uses.     

Enzymatic resolution of 2-phenoxy-1-propanols through the enantioselective acylation mediated by Achromobacter sp. lipase

2-(Substituted phenoxy)-1-propanols, e.g. 2-(4-chlorophenoxy)-1-propanol, belonging to primary alcohols with an oxygen atom at the stereocenter, were resolved with moderate to good enantioselectivity, as judged by the value of enantiomeric ratio E (up to 27), through the enantioselective acylation with vinyl butanoate mediated by the little-known lipase from Achromobacter sp. in diisopropyl ether, after the examination of potential factors affecting the reaction such as organic solvents and acyl donors.     

A hyper-thermostable, alkaline lipase from Pseudomonas sp. with the property of thermal activation

A hyper-thermostable, alkaline lipase from a newly-isolated, mesophilic Pseudomonas sp. was optimal at pH 11 and at 90 °C. It had a half-life of more than 13 h at 90 °C. It was activated by 30% when heated at 90 °C for 2 h. The enzyme had a greater affinity for mustard oil (K _m=40 mg ml^–1) than for olive oil (K _m=140 mg ml^–1).     

In vitro study on bacteriocin production of Enterococci associated with chickens

In recent years, the approach of using innovative strategies such as probiotics or bacteriocins for the prevention or treatment of bacterial infections has come into focus. The present study was undertaken to check in vitro ability of Enterococci-isolated from the gastrointestinal tract of chickens-to produce a bacteriocin-like substance and to describe some further probiotic properties in five selected Enterococcus faecium strains. All strains (n=17) were found to produce bacteriocin-like substances against 14 out of 20 indicator bacteria of animal, food or environmental origin. Selected E. faecium strains expressed sufficient survival by pH 3.0 after 3h, in the presence of 1% bile after 24h and they were sensitive to most of antimicrobials tested. All tested strains adhere to the human, canine and porcine intestinal mucus (between 1.5% and 9.2%). However, better adhesion ability was observed for the canine mucus. PCR detection of enterocin structural genes determined presence of enterocins A and P genes in all selected strains. Characterization of bacteriocin substance in detail was performed in E. faecium EF55. The EF55 strain produced a bacteriocin-like substance (during the late logarithmic and early stationary growth phase) with inhibitory activity mostly against Gram-positive bacteria (100-51,200 AU/mL) including Listeria monocytogenes. Proteinaceous character of the bacteriocin substance was confirmed (its inhibitory activity was lost after its treatment with proteases), it was found to be stable after heating (100 degrees C 10 min) and during 12 months storage at -20 degrees C. The highest inhibitory activity of bacteriocin produced by EF55 strain (growing in MRS) broth was achieved between pH 7.0 and 9.0.     

Production and physicochemical characterization of acidocin D20079, a bacteriocin produced by Lactobacillus acidophilus DSM 20079

Lactobacillus acidophilus DSM 20079 is the producer of a novel bacteriocin termed acidocin D20079. In this paper, a partial sequence of this peptide is determined, together with data on its secondary structure. A modification of the MRS-growth medium (replacing the detergent Tween 80 with oleic acid), was shown to improve the production level of the peptide by one order of magnitude, as well as to stabilize the activity level. Addition of a detergent (Tween 20, less interfering in mass spectrometric analysis), was however necessary for solubilization of the purified acidocin D20079. Digestion of the peptide followed by de-novo sequencing of generated fragments, allowed determination of a partial sequence consisting of 39 of the totally estimated 65 residues. Acidocin D20079 has a high content of glycine residues, hydrophobic residues, and acidic residues. No modified amino acids were found. Edman degradation, and C-terminal sequencing failed, suggesting that the peptide may be cyclic, and a novel member of class IIc bacteriocins. Circular dichroism spectroscopy and secondary structure prediction showed random coil conformation in aqueous solution, but secondary structure was induced in the presence of sodium-dodecyl sulfate. The data could be fitted assuming 2–13% of the residues to be in α-helix and 23–27% of the residues to be in β-strand conformation. This indicates that a membrane/membrane-mimicking hydrocarbon–water interface induces an active conformation.     

Optimization of thermostable lipase production from a thermophilic Geobacillus sp. using Box-Behnken experimental design

Thermostable lipase production by Geobacillus thermoleovorans was optimized in shake-flask cultures using Box-Behnken experimental design. An empirical model was developed through response surface methodology to describe the relationship between tested variables (Tween 80, olive oil, temperature and pH) and enzyme activity. Maximum enzyme activity (495 U l^–1) was attained with Tween 80 at 5 g l^–1; olive oil at 60 g l^–1; 70 °C and pH 9. Experimental verification of the model showed a validation of 95%, which is more than 4-fold increase compared to the basal medium.     

Purification and effects of fulvocin C,a bacteriocin from Myxococcus fulvus Mx f16

Fulvocin C is a bacteriocin from Myxococcus fulvus Mx f16. It has a molecular weight of 4672 and is one of the smallest bacteriocins known. Four disulfide bonds give the molecule a tight structure, so that its native form was not attacked by chymotrypsin or pronase. Fulvocin C was stable in various organic solvents and could tolerate 80° C in aqueous solution without loss of activity. The killing effect of fulvocin C was observed only at concentrations higher than 0.25 mol/l. Macromolecular synthesis (DNA, RNA, protein) was affected very gradually. Viability in growing cultures decreased slowly from 100 to 25% during one generation (8 h). Cell division was affected early. After one generation v-shaped cell pairs had accumulated in the culture. Electron microscopic pictures revealed extended membrane systems connected with the inner membrane. The most striking effect was that often the outer membranes of neighbouring cells seemed to have fused laterally. With further incubation many cells lost their rod shape and empty bags became predominant.Abbreviations cas lm Casitone liquid medium - O.D. optical density - SDS dodecyl sulfate, sodium salt - TCA trichloro-acetic acid     

The stable bacteriocin release protein signal peptide, expressed as a separate entity, functions in the release of cloacin DF13

Abstract The pCloDF1S encoded bacteriocin release protein (BRP) plays a role in the release of the bacteriocin cloacin DF13. The BRP signal peptide is stable after cleavage, and accumulates in the cytoplasmic membrane. A BRP which is correctly targeted by the unstable murein lipoprotein signal peptide (Lpp-BRP) is not capable of inducing the release of cloacin DF13. To investigate the role of the stable BRP signal peptide in the release of cloacin DF13, the stable BRP signal peptide and the Lpp-BRP were expressed in trans in cells also producing cloacin DF13. Expression and release experiments indicate that the stable signal peptide can complement the Lpp-BRP in the release of cloacin DF13.     

Biosynthesis of a thermostable gellan lyase by newly isolated and characterized strain of Geobacillus stearothermophilus 98

The thermophilic strain able to degrade gellan was isolated from Bulgarian hot spring. According to its morphological and biochemical properties and by partial sequencing of its 16S rDNA, it was classified as Geobacillus stearothermophilus. It grew in a synthetic medium with gellan as the only carbon source with a specific growth rate of 0.69 h⁻¹ and generation time of 60 min. The strain produced thermostable gellan lyase extracellularly during exponential phase. Its synthesis was inducible; the enzyme was not registered in culture liquid without gellan. The enzyme activity was increased tenfold in conditions of continuous cultivation compared to data from batch fermentations and enzyme productivity was almost sixfold higher. The enzyme showed optimal activity at 75°C in a very large pH area 4–8.5. This enzyme is the first reported thermostable gellan lyase, its residual activity was 100% after 24 h incubation at 60°C and its half-life was 60 min at 70°C.