Structure/function relationships of several biopolymers as related to invertase stability in dehydrated systems

Structure/function relationships of different biopolymers (alginate, dextran, or beta-cyclodextrin) were analyzed as single excipients or combined with trehalose in relation to their efficiency as enzyme stabilizers in freeze-dried formulations and compared to trehalose. Particularly, a novel synthesized polymer beta-cyclodextrin-branched alginate (beta-CD-A) was employed as excipient. During freeze-drying, the polymers or their mixtures did not confer better protection to invertase compared to trehalose. Beta-CD-A (with or without trehalose), beta-cyclodextrin (beta-CD), or dextran with trehalose were the best protective agents during thermal treatment, while beta-CD and alginate showed a negative effect on invertase activity preservation. The beta-CD linked alginate combined the physical stability provided by alginate with the stabilization of hydrophobic regions of the enzyme provided by cyclodextrin. Beta-CD-A was effective even at conditions at which trehalose lost its protective effect. A relatively simple covalent combination of two biopolymers significantly affected their functionalities and, consequently, their interactions with proteins, modifying enzyme stability patterns.     

亚栖热菌透性化细胞的耦合固定化研究

将海藻酸盐凝胶包埋法与交联法和聚电解质静电自组装覆膜法相耦合,对含有海藻糖合酶活性的亚栖热菌的透性化细胞进行了固定化研究。结果表明,利用重氮树脂和聚苯乙烯磺酸钠对海藻酸凝胶微球交替覆膜,可以显著提高凝胶微球在磷酸盐缓冲液中的稳定性,以碳二亚胺对固定化细胞进行交联处理则可以提高固定化细胞中海藻糖合酶的热稳定性。透性化细胞经包埋－交联－覆膜耦合固定化后,酶活回收率为32％,最适酶反应pH值由6.5左右升至7.0左右,最适反应温度未变,仍为60℃。所得固定化细胞间歇反应时,催化麦芽糖转化为海藻糖的转化率可达60％,重复使用4次（每次50℃、反应24h）,酶活损失小于20％,转化率可保持在50％以上。     

Microencapsulation of nanoparticulate complexes of DNA with cationic lipids and polymers in pectin beads for targeted gene delivery

Nanoparticulate complexes of plasmid DNA (pDNA) with cationic liposomes/polymer, of approx 200 nm diameter, were encapsulated with a high degree of efficiency within calcium pectinate gel beads. Electron microscopy showed the DNA nanocomplexes to be evenly distributed throughout the gel matrix. Controlled release of pDNA-lipid nanocomplexes was achieved by the action of pectinase enzymes, whereas release of naked and polymer-complexed DNA was found to be more greatly influenced by the swelling behavior of the polysaccharide matrices in buffer alone. Physical degradation of pDNA within pectin beads was found to be accelerated during bead drying, most probably as a result of shear forces generated within the gel matrices by the evaporation of water. Plasmid complexation with cationic liposomes provided a greater degree of protection for the DNA during bead drying than complexation with cationic polymer, and was shown to successfully transfect cultured cells after release from the beads, via the action of pectinase. Observations concerning the physical stability of nanocomplexed pDNA, and its encapsulation within and release from pectin gel beads, are discussed with reference to the electrostatic interactions existing between the various components.     

Calcium alginate beads coated with chitosan: Effect of the structure of encapsulated materials on their release

Bovine serum albumin, human haemoglobin and dextran (with different molecular weights) were encapsulated in calcium alginate beads coated with chitosan. Their release from these modified alginate beads was studied to determine what parameters related to the encapsulated materials govern their release during bead formation and storage. By comparing release of albumin (BSA) and haemoglobin (Hb) that have about the same molecular weight (67000 for BSA and 64500 for Hb), it was found that pH played an important role during both bead formation and storage. pH influences the degree of ionisation of proteins and thus the interactions between proteins and alginate; it also has an influence on the Ca²⁺-alginate and alginate-chitosan interactions. With neutral molecules such as dextran, release is directly connected to the chain molecular weights, although the flexibility of the encapsulated molecules favours their diffusion through the bead alginate-Ca²⁺ core and through the polyelectrolyte chitosan-alginate membrane.     

Increasing the stability of immobilizedLactococcus lactis cultures stored at 4 °C

Summary Immobilized cell technology was used to prepare concentrated cultures ofLactococcus lactis that lost only 22% of viability over a 30-day storage period at 4°C. Concentrated cultures ofL lactis CRA-1 were immobilized in calcium alginate beads and added to glycerol, NaCl or sucrose-NaCl solutions in order to obtain a_w readings ranging from 0.91 to 0.97. The suspensions were subsequently placed at 4°C and viability (CFU g^–1 of bead) was followed during storage. Viability losses were high at a_w readings of 0.95 and 0.97 and pH dropped significantly (up to one unit) in the unbuffered solutions. Addition of 1% soytone or glycerophosphate helphed stabilize pH, and a beneficial effect on viability during storage was observed in the glycerol-soytone mix when the beads were added to the conservation solutions immediately following immobilization. When beads were added to the conservation solution immediately following immobilization, a 70% drop in cell counts occurred during the first 5 days of incubation. Dipping theL lactis-carrying beads in milk for 2h before mixing with the glycerolsoytone 0.93 a_w solution reduced this initial 5-day viability loss. Cultures grown in the alginate beads also had good stability in the 0.93 a_w glycerol-soytone solution, where 78% of the population was viable after 30 days at 4°C. The process could be used to store immobilized cells at a processing plant, or by suppliers of lactic starters who wish to ship cultures without freezing or drying.     

Characterization of calcium alginate and chitosan-treated calcium alginate gel beads entrapping allyl isothiocyanate

Calcium alginate (CA), chitosan-coated calcium alginate (CCA-I), and chitosan–calcium alginate complex (CCA-II) gel beads, in which an oil-in-water emulsion containing allyl isothiocyanate (AITC) was entrapped, were prepared and characterized for efficient oral delivery of AITC. The AITC entrapment efficiency was 81% for CA gel beads, whereas about 30% lower values were determined for the chitosan-treated gel beads. Swelling studies showed that all the gel beads suddenly shrunk in simulated gastric fluid (pH 1.2). In simulated intestinal fluid (pH 7.4), CA and CCA-I gel beads rapidly disintegrated, whereas CCA-II gel beads highly swelled without degradation probably due to the strong chitosan–alginate complexation. Release studies revealed that most entrapped AITC was released during the shrinkage, degradation, or swelling of the gel beads, and the chitosan treatments, especially the chitosan–alginate complexation, were effective in suppressing the release. CCA-II gel beads showed the highest bead stability and AITC retention under simulated gastrointestinal pH conditions.     

Evaluation of Chitosan/Alginate Beads Using Experimental Design: Formulation and <Emphasis Type="Italic">In Vitro</Emphasis> Characterization

Bovine serum albumin-loaded beads were prepared by ionotropic gelation of alginate with calcium chloride and chitosan. The effect of sodium alginate concentration and chitosan concentration on the particle size and loading efficacy was studied. The diameter of the beads formed is dependent on the size of the needle used. The optimum condition for preparation alginate–chitosan beads was alginate concentration of 3% and chitosan concentration of 0.25% at pH 5. The resulting bead formulation had a loading efficacy of 98.5% and average size of 1,501 μm, and scanning electron microscopy images showed spherical and smooth particles. Chitosan concentration significantly influenced particle size and encapsulation efficiency of chitosan–alginate beads (p < 0.05). Decreasing the alginate concentration resulted in an increased release of albumin in acidic media. The rapid dissolution of chitosan–alginate matrices in the higher pH resulted in burst release of protein drug.     

pH-controlled cell release and biomass distribution of alginate-immobilized Lactococcus lactis subsp. lactis

AIMS: To investigate the growth and release of Lactococcus lactis subsp. lactis in gel beads and to affect rates of cell release by changing the growth conditions. METHODS AND RESULTS: The rate of release and the distribution of immobilized L. lactis subsp. lactis in alginate beads were studied in continuous fermentations for 48 h. A change in operating pH from 6.5 to 9.25 initially reduced the ratio of the rates of cell release to lactate production by almost a factor of 105. Compared with fermentations at pH 6.5, growth at pH 9.25 also increased the final internal bead biomass concentration by a factor of 5 and increased the final rate of lactate production by 25%. After 48 h, the ratio of the rates of cell release to lactate production was still 10 times lower than in fermentations at pH 6.5. CONCLUSIONS: A change in the operating pH from 6.5 to 9.25 reduced rates of cell release throughout 48 h of fermentation and increased the final rates of lactate production and internal bead biomass concentration. SIGNIFICANCE AND IMPACT OF THE STUDY: These data illustrate that diffusional limitations and corresponding pH gradients can be exploited in affecting the distribution of immobilized growing cells and their concomitant release.     

Sulfasalazine release from alginate-N,O-carboxymethyl chitosan gel beads coated by chitosan

In the present study, spherical beads were prepared from a water-soluble chitosan (N,O-carboxymethyl chitosan, NOCC) and alginate with ionic gelation method. Then, swollen calcium–alginate–NOCC beads were coated with chitosan. To prepare drug loaded beads, sulfasalazine (SA) was added to the initial aqueous polymer solution. The effect of coating, as well as drying procedure, on the swelling behavior of unloaded beads and SA release of drug loaded ones were evaluated in simulated gastrointestinal tract fluid. The rate of swelling and drug release were decreased for air-dried and coated beads in comparison with freeze-dried and uncoated ones, respectively. No burst release of drug was observed from whole tested beads. Chitosan coated beads released approximately 40% of encapsulated drug in simulated gastric and small intestine tract fluid. Based on these results, the chitosan coated alginate–NOCC hydrogel may be used as potential polymeric carrier for colon-specific delivery of sulfasalazine.     

Immobilization of thermoalkalophilic recombinant esterase enzyme by entrapment in silicate coated Ca-alginate beads and its hydrolytic properties

Thermoalkalophilic esterase enzyme from Bal?ova (Agamemnon) geothermal site were aimed to be immobilized effectively via a simple and cost-effective protocol in silicate coated Calcium alginate (Ca-alginate) beads by entrapment. The optimal immobilization conditions of enzyme in Ca-alginate beads were investigated and obtained with 2% alginate using 0.5mg/ml enzyme and 0.7 M CaCl(2) solution. In order to prevent enzyme from leaking out of the gel beads, Ca-alginate beads were then coated with silicate. Enzyme loading efficiency and immobilization yield for silicate coated beads was determined as 98.1% and 71.27%, respectively and compared with non-coated ones which were 68.5% and 45.80%, respectively. Surface morphologies, structure and elemental analysis of both silicate coated and non-coated alginate beads were also compared using Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscope (SEM) equipped with Energy-dispersive X-ray spectroscopy (EDX). Moreover, silicate coated alginate beads enhanced reusability of esterase in continuous processes compared to non-coated beads. The hydrolytic properties of free and immobilized enzyme in terms of storage and thermal stability as well as the effects of the temperature and pH were determined. It was observed that operational, thermal and storage stabilities of the esterase were increased with immobilization.     

Effect of skim milk-alginate beads on survival rate of bifidobacteria

In this study, an attempt was made to increase the survival rate of bifidobacteria entrapped in alginate in the gastrointestinal tract, and to investigate the potential industrial applications, for example lyophilized capsules and yogurt. First, the protective effect of various food additives on bifidobacterial survivability was determined after exposure to simulated gastric juices and bile salts. The additives used in this study were skim milk (SM), poly dextrose (PD), soy fiber (SF), yeast extract (YE), chitosan (CS), κ-carageenan (κ-C) and whey, which were added at 0.6% concentration (w/v) to 3% alginate-bifidobacterial solution. In the simulated gastric juices and bile salts, the protective effect of 0.6% skim milk-3% alginate (SM-A) beads on the survival rate of bifidobacteria proved to be higher than the other additives. Second, the hydrogen ion permeation was detected through SM-A vessel without bifidobacterial cells at different SM concentrations (0.2%, 0.4%, 0.6%, 0.8%, and 1.0%). There were no differences in terms of the pH decrease in SM-A vessels at 0.6%, 0.8%, and 1.0% (w/v) SM concentrations. The survival rate of bifidobacteria in SM-A beads would appear to be related to the SM buffering capacity against hydrogen ions and its tendency to reduce the pore size of bead. In this experiment, the survival rate of bifidobacteria entrapped in beads containing 0.6% SM showed the highest viability after exposure to simulated gastric juices for 3 h, thereby indicating that 0.6% SM is the optimum concentration for 3% alginate bead preparation. Third, the effect of SM-A beads on the freeze-drying and yogurt storage for 10 days was investigated. SM-A beads were found to be more efficient for freeze drying and yogurt storage than untrapped cells and the alginate bead. Consequently, the survival rate of bifidobacteria entrapped in SM-A beads was increased in simulated gastric juices, bile salts and probiotic products such as lyophilized capsules and yogurt, SM-A beads can be expected to produce high value probiotic products.     

Encapsulation of R. planticola Rs-2 from alginate-starch-bentonite and its controlled release and swelling behavior under simulated soil conditions

The plant growth-promoting bacteria (PGPR) Raoultella planticola Rs-2 was encapsulated with the various blends of alginate, starch, and bentonite for development of controlled-release formulations. The stability and release characteristics of these different capsule formulations were evaluated. The entrapment efficiency of Rs-2 in the beads (capsules) was more than 99%. The diameter of dry beads ranged from 0.98 to 1.41 mm. The bacteria release efficiency, swelling ratio, and biodegradability of the different bead formulations were enhanced by increasing the starch or alginate contents, but were impeded by higher bentonite content. The release kinetics of viable cells from capsules and the swelling ratio of capsules were studied in simulated soil media of varying temperature, moisture, pH, and salt content. The release of loaded Rs-2 cells and swelling of capsules are greatly affected by moisture, temperature, pH and salt content of the release medium. The release of viable Rs-2 cells from capsules was positively associated with the swelling properties of the capsules. The release of Rs-2 cells occurred through a Case II diffusion mechanism. In summary, this work indicates that alginate-starch-bentonite blends are a viable option for the development of efficient controlled-release formulations of Rs-2 biofertilizer, and which could have a promising application in natural field conditions.     

Trehalose production at high temperature exploiting an immobilized cell bioreactor

The enzymatic production of trehalose from dextrins was studied as a series reaction in a packed bed reactor containing immobilized recombinant Escherichia coli cells, expressing either the Sulfolobus solfataricus (strain MT4) trehalosyl-dextrin forming enzyme (TDFE) or the trehalose-forming enzyme (TFE). The cells, subjected to thermal treatments to increase cell permeability and to inactivate the unwanted host proteins, were entrapped separately or together in a calcium alginate polymeric matrix. The biocatalyst beads were used to pack a tubular glass reactor that was operated in a recycle mode. The performances of a bioreactor containing alternate layers of EcTFE and EcTDFE alginate beads were evaluated and compared with the performance of the co-immobilized biocatalysts. The latter showed a superior throughput, therefore the bioreactor packed with the co-entrapped biocatalysts was tested for the production of trehalose from concentrated dextrin solutions (10%-30% w/v) and a conversion up to 90% was obtained. This conversion corresponded to a production of 127 g trehalose h(-1) kg(-1) of biocatalyst. The results obtained suggest that the bioprocess described may be of interest in the development of a large-scale industrial process for trehalose production at high temperature.     

Artemisia arborescens L essential oil loaded beads: Preparation and characterization

The purpose of this work was to prepare sodium alginate beads as a device for the controlled release of essential oil for oral administration as an antiviral agent. Different formulations were prepared with sodium alginate as a natural polymer and calcium chloride or glutaraldehyde as a cross-linking agent. Loading capacities of between 86% and 100% were obtained in freshly prepared beads by changing exposure time to the cross-linking agent. Drying of the calcium alginate beads caused only a slight decrease in the loading efficiency. The surface morphology of the different bead formulations were studied using scanning electron microscopy (SEM). Stability studies over a 3-month period showed that glutaraldehyde reacted with some components ofArtemisia arborescens L essential oil, changing its composition. Calcium alginate beads showed an in vitro controlled release of the essential oil for the investigated 24 hours, while the use of glutaraldehyde as a cross-linking agent was found not appropriate because of the interactions with azulene derivatives and the low degree of matrix cross-linkage. Published: August 24, 2007     

Transport limitation of chlorine disinfection of Pseudomonas aeruginosa entrapped in alginate beads

An artificial biofilm system consisting of Pseudomonas aeruginosa entrapped in alginate and agarose beads was used to demonstrate transport limitation of the rate of disinfection of entrapped bacteria by chlorine. Alginate gel beads with or without entrapped bacteria consumed chlorine. The specific rate of chlorine consumption increased with increasing cell loading in the gel beads and decreased with increasing bead radius. The value of an observable modulus comparing the rates of reaction and diffusion ranged from less than 0.1 to 8 depending on the bead radius and cell density. The observable modulus was largest for large (3-mm-diameter) beads with high cell loading (1.8 x 10(9) cfu/cm(3)) and smallest for small beads (0.5 mm diameter) with no cells added. A chlorine microelectrode was used to measure chlorine concentration profiles in agarose beads (3.0 mm diameter). Chlorine fully penetrated cell-free agarose beads rapidly; the concentration of chlorine at the bead center reached 50% of the bulk concentration within approximately 10 min after immersion in chlorine solution. When alginate and bacteria were incorporated into an agarose bead, pronounced chlorine concentration gradients persisted within the gel bead. Chlorine did gradually penetrate the bead, but at a greatly retarded rate; the time to reach 50% of the bulk concentration at the bead center was approximately 46 h. The overall rate of disinfection of entrapped bacteria was strongly dependent on cell density and bead radius. Small beads with low initial cell loading (0.5 mm diameter, 1.1 x 10(7) cfu/cm(3)) experienced rapid killing; viable cells could not be detected (<1.6 x 10(5) cfu/cm(3)) after 15 min of treatment in 2.5 mg/L chlorine. In contrast, the number of viable cells in larger beads with a higher initial cell density (3.0 mm diameter, 2.2 x 10(9) cfu/cm(3)) decreased only about 20% after 6 h of treatment in the same solution. Spatially nonuniform killing of bacteria within the beads was demonstrated by measuring the transient release of viable cells during dissolution of the beads. Bacteria were killed preferentially near the bead surface. Experimental results were consistent with transport limitation of the penetration of chlorine into the artificial biofilm arising from a reaction-diffusion interaction. The methods reported here provide tools for diagnosing the mechanism of biofilm resistance to reactive antimicrobial agents in such applications as the treatment of drinking and cooling waters. (c) 1996 John Wiley & Sons, Inc.     

Enhanced production of bioethanol and ultrastructural characteristics of reused Saccharomyces cerevisiae immobilized calcium alginate beads

Yeast immobilized on alginate beads produced a higher ethanol yield more rapidly than did free yeast cells under the same batch-fermentation conditions. The optimal fermentation conditions were 30 °C, pH 5.0, and 10% initial glucose concentration with 2% sodium alginate beads. The fermentation time using reused alginate beads was 10-14 h, whereas fresh beads took 24 h, and free cells took 36 h. All bead samples resulted in nearly a 100% ethanol yield, whereas the free cells resulted in an 88% yield. Transmission electron microscopy (TEM) showed that the shortened time and higher yield with the reused beads was due to a higher yeast population per bead as well as a higher porosity. The ultrastructure of calcium alginate beads and the alginate matrix structure known as the “egg-box” model were observed using TEM.     

Encapsulation of tannase for the hydrolysis of tea tannins

Tannase was encapsulated in alginate, chitosan, carrageenan or pectin gel matrices, and in the case of alginate, coated with high or low molecular weight chitosan to reduce enzyme release. Cross-linking with glutaraldehyde also improved enzyme retention. Active enzyme preparations were obtained, although carrageenan gels were unstable in tea. Tannase activity was evaluated by reduction in centrifugable (flocculated) tea solids, and a reduction in tea cream measured turbidimetrically after removal of flocculated solids. Tannin interactions with the polysaccharide gels increased the level of centrifugable solids (flocculent) in the tea. An optimum bead formulation consisted of an alginate core, coated with chitosan and cross-linked with glutaraldehyde. Both core and coating materials contained active enzyme. Beads were prepared in a single step procedure involving extrusion of alginate/tannase solution into a hardening bath containing tannase-loaded, chitosan solution. Tannase retained hydrolytic activity through three successive batch cycles, for a total period of 39h processing, and tea cream was visibly removed by treatment with the immobilized tannase. Activity remained stable during 1-month bead storage under refrigeration.     

Spectrophotometric quantification of lactic bacteria in alginate and control of cell release with chitosan coating

Lactococcus lactis ssp. cremoris was entrapped within a Ca-alginate matrix, and an in situ spectrophotometric method for monitoring cell population in calcium alginate beads described. The intracapsular cell population can be estimated by measuring the optical density of beads containing cells, using cell-free beads as reference, or by measuring absorbance of a liquified bead suspension. Alginate beads, and beads coated with chitosan type I, II, and I and II mixtures, were examined for cell release. Lower viscosity chitosan (type I) coatings reduced cell release by a factor of 100 from10⁵ cfu ml⁻¹ to 10³ cfu ml⁻¹ after 6 h of fermentation. Reuse of chitosan I coated alginate beads also showed a reduction in cell release by a factor of 100. Cell loading and initial cell growth within the beads greatly affected cell release. Reducing the initial cell release would lower the overall levels of cell release throughout the fermentation. Compared to non-immobilized cultures, a 20–40% reduction in the lactic acid production rate was observed for alginate beads and chitosan I coated alginate beads, respectively. This reduction can be compensated for by increasing the intracapsular cell loading during immobilization, or before the onset of fermentation.     

Determination of the radial distribution of Saccharomyces cerevisiae immobilised in calcium alginate gel beads

Summary The dissolution of alginate gel beads in 20 g sodium citrate /l produces a linear decrease in bead diameter. The rate of dissolution is dependent on the concentration of CaCl₂ within the gel beads. This method allows the controlled release of Saccharomyces cerevisiae from alginate gel beads and permits the simple and rapid determination of the radial distribution of cell concentration.     

Comparison of some properties of free and immobilized alpha-amylase by Aspergillus sclerotiorum in calcium alginate gel beads

Some properties of immobilized alpha-amylase by Aspergillus sclerotiorum within calcium alginate gel beads were investigated and compared with soluble enzyme. Optimum pH and temperature were found to be 5.0 and 40 degrees C, respectively, for both soluble and immobilized enzymes. The immobilized enzyme had a better Km value, but kcat/Km values were the same for both enzymes. Entrapment within calcium alginate gel beads improved, remarkably, the thermal and storage stability of alpha-amylase. The half life values of immobilized enzyme and soluble enzyme at 60 degrees C were 164.2, and 26.2 min, respectively. The midpoint of thermal inactivation (Tm) shifted from 56 degrees C (for soluble enzyme) to 65.4 degrees C for immobilized enzyme. The percentages of soluble starch hydrolysis for soluble and immobilized alpha-amylase were determined to be 97.5 and 92.2% for 60 min, respectively.