Solution structure of switch Arc,a mutant with 3(10) helices replacing a wild-type beta-ribbon

Adjacent N11L and L12N mutations in the antiparallel beta-ribbon of Arc repressor result in dramatic changes in local structure in which each beta-strand is replaced by a right-handed helix. The full solution structure of this "switch" Arc mutant shows that irregular 3(10) helices compose the new secondary structure. This structural metamorphosis conserves the number of main-chain and side-chain to main-chain hydrogen bonds and the number of fully buried core residues. Apart from a slight widening of the interhelical angle between alpha-helices A and B and changes in side-chain conformation of a few core residues in Arc, no large-scale structural adjustments in the remainder of the protein are necessary to accommodate the ribbon-to-helix change. Nevertheless, some changes in hydrogen-exchange rates are observed, even in regions that have very similar structures in the two proteins. The surface of switch Arc is packed poorly compared to wild-type, leading to approximately 1000A(2) of additional solvent-accessible surface area, and the N termini of the 3(10) helices make unfavorable head-to-head electrostatic interactions. These structural features account for the positive m value and salt dependence of the ribbon-to-helix transition in Arc-N11L, a variant that can adopt either the mutant or wild-type structures. The tertiary fold is capped in different ways in switch and wild-type Arc, showing how stepwise evolutionary transformations can arise through small changes in amino acid sequence.     

A polymetamorphic protein

Arc repressor is a homodimeric protein with a ribbon‐helix–helix fold. A single polar‐to‐hydrophobic substitution (N11L) at a solvent‐exposed position leads to population of an alternate dimeric fold in which 3₁₀ helices replace a β‐sheet. Here we find that the variant Q9V/N11L/R13V (S‐VLV), with two additional polar‐to‐hydrophobic surface mutations in the same β‐sheet, forms a highly stable, reversibly folded octamer with approximately half the?α‐helical content of wild‐type Arc. At low protein concentration and low ionic strength, S‐VLV also populates both dimeric topologies previously observed for N11L, as judged by NMR chemical shift comparisons. Thus, accumulation of simple hydrophobic mutations in Arc progressively reduces fold specificity, leading first to a sequence with two folds and then to a manifold bridge sequence with at least three different topologies. Residues 9–14 of S‐VLV form a highly hydrophobic stretch that is predicted to be amyloidogenic, but we do not observe aggregates of higher order than octamer. Increases in sequence hydrophobicity can promote amyloid aggregation but also exert broader and more complex effects on fold specificity. Altered native folds, changes in fold coupled to oligomerization, toxic pre‐amyloid oligomers, and amyloid fibrils may represent a near continuum of accessible alternatives in protein structure space.     

NMR studies of structure, hydrogen exchange, and main-chain dynamics in a disrupted-core mutant of thioredoxin.

Core-packing mutants of proteins often approach molten globule states, and hence may have attributes of folding intermediates. We have studied a core-packing mutant of thioredoxin, L78K, in which a leucine residue is substituted by lysine, using 15N heteronuclear two- and three-dimensional NMR. Chemical shift differences between the mutant and wild-type main-chain resonances reveal that structural changes caused by the mutation are localized within 12 A of the altered side chain. The majority of resonances are unchanged, as are many 1H-1H NOEs indicative of the main-chain fold, suggesting that the structure of L78K is largely similar to wild type. Hydrogen exchange studies reveal that residues comprising the central beta-sheet of both mutant and wild-type proteins constitute a local unfolding unit, but with the unfolding/folding equilibrium approximately 12 times larger in L78K. The dynamics of main-chain NH bonds in L78K were studied by 15N spin relaxation and compared with a previous study of wild type. Order parameters for angular motion of NH bonds in the mutant are on average lower than in wild type, suggesting greater spatial freedom on a rapid time scale, but may also be related to different rotational correlation times in the two proteins. There is also evidence of greater conformational exchange in the mutant. Differences between mutant and wild type in hydrogen exchange and main-chain dynamics are not confined to the vicinity of the mutation. We infer that mispacking of the protein core in one location affects local dynamics and stability throughout.     

The solution structure and dynamics of an Arc repressor mutant reveal premelting conformational changes related to DNA binding.

The solution structure of the hyperstable MYL mutant (R31M/E36Y/R40L) of the Arc repressor of bacteriophage P22 was determined by NMR spectroscopy and compared to that of the wild-type Arc repressor. A backbone rmsd versus the average of 0.37 A was obtained for the well-defined core region. For both Arc-MYL and the wild-type Arc repressor, evidence for a fast equilibrium between a packed ("in") conformation and an extended ("out") conformation of the side chain of Phe 10 was found. In the MYL mutant, the "out" conformation is more highly populated than in the wild-type Arc repressor. The Phe 10 is situated in the DNA-binding beta-sheet of the Arc dimer. While its "in" conformation appears to be the most stable, the "out" conformation is known to be present in the operator-bound form of Arc, where the Phe 10 ring contacts the phosphate backbone [Raumann, B. E., et al. (1994) Nature 367, 754-757]. As well as DNA binding, denaturation by urea and high temperatures induces the functionally active "out" conformation. With a repacking of the hydrophobic core, this characterizes a premelting transition of the Arc repressor. The dynamical properties of the Arc-MYL and the wild-type Arc repressor were further characterized by 15N relaxation and hydrogen-deuterium exchange experiments. The increased main chain mobility at the DNA binding site compared to that of the core of the protein as well as the reorientation of the side chain of Phe 10 is suggested to play an important role in specific DNA binding.     

Increased sequence hydrophobicity reduces conformational specificity: A mutational case study of the Arc repressor protein

The amino-acid sequences of soluble, globular proteins must have hydrophobic residues to form a stable core, but excess sequence hydrophobicity can lead to loss of native state conformational specificity and aggregation. Previous studies of polar-to-hydrophobic mutations in the β-sheet of the Arc repressor dimer showed that a single substitution at position 11 (N11L) leads to population of an alternate dimeric fold in which the β-sheet is replaced by helix. Two additional hydrophobic mutations at positions 9 and 13 (Q9V and R13V) lead to population of a differently folded octamer along with both dimeric folds. Here we conduct a comprehensive study of the sequence determinants of this progressive loss of fold specificity. We find that the alternate dimer-fold specifically results from the N11L substitution and is not promoted by other hydrophobic substitutions in the β-sheet. We also find that three highly hydrophobic substitutions at positions 9, 11, and 13 are necessary and sufficient for oligomer formation, but the oligomer size depends on the identity of the hydrophobic residue in question. The hydrophobic substitutions increase thermal stability, illustrating how increased hydrophobicity can increase folding stability even as it degrades conformational specificity. The oligomeric variants are predicted to be aggregation-prone but may be hindered from doing so by proline residues that flank the β-sheet region. Loss of conformational specificity due to increased hydrophobicity can manifest itself at any level of structure, depending upon the specific mutations and the context in which they occur.     

Importance of secondary structural specificity determinants in protein folding: insertion of a native beta-sheet sequence into an alpha-helical coiled-coil

To examine how a short secondary structural element derived from a native protein folds when in a different protein environment, we inserted an 11-residue beta-sheet segment (cassette) from human immunoglobulin fold, Fab new, into an alpha-helical coiled-coil host protein (cassette holder). This de novo design protein model, the structural cassette mutagenesis (SCM) model, allows us to study protein folding principles involving both short- and long-range interactions that affect secondary structure stability and conformation. In this study, we address whether the insertion of this beta-sheet cassette into the alpha-helical coiled-coil protein would result in conformational change nucleated by the long-range tertiary stabilization of the coiled-coil, therefore overriding the local propensity of the cassette to form beta-sheet, observed in its native immunoglobulin fold. The results showed that not only did the nucleating helices of the coiled-coil on either end of the cassette fail to nucleate the beta-sheet cassette to fold with an alpha-helical conformation, but also the entire chimeric protein became a random coil. We identified two determinants in this cassette that prevented coiled-coil formation: (1) a tandem dipeptide NN motif at the N-terminal of the beta-sheet cassette, and (2) the hydrophilic Ser residue, which would be buried in the hydrophobic core if the coiled-coil structure were to fold. By amino acid substitution of these helix disruptive residues, that is, either the replacement of the NN motif with high helical propensity Ala residues or the substitution of Ser with Leu to enhance hydrophobicity, we were able to convert the random coil chimeric protein into a fully folded alpha-helical coiled-coil. We hypothesized that this NN motif is a "secondary structural specificity determinant" which is very selective for one type of secondary structure and may prevent neighboring residues from adopting an alternate protein fold. These sequences with secondary structural specificity determinants have very strong local propensity to fold into a specific secondary structure and may affect overall protein folding by acting as a folding initiation site.     

Consequences of stabilizing the natively disordered f helix for the folding pathway of apomyoglobin

The F helix region of sperm whale apomyoglobin is disordered, undergoing conformational fluctuations between a folded helical conformation and one or more locally unfolded states. To examine the effects of F helix stabilization on the folding pathway of apomyoglobin, we have introduced mutations to augment intrinsic helical structure in the F helix of the kinetic folding intermediate and to increase its propensity to fold early in the pathway, using predictions based on plots of the average area buried upon folding (AABUF) derived from the primary sequence. Two mutant proteins were prepared: a double mutant, P88K/S92K (F2), and a quadruple mutant, P88K/A90L/S92K/A94L (F4). Whereas the AABUF for F2 predicts that the F helix will not fold early in the pathway, the F helix in F4 shows a significantly increased AABUF and is therefore predicted to fold early. Protection of amide protons by formation of hydrogen-bonded helical structure during the early folding events has been analyzed by pH-pulse labeling. Consistent with the AABUF prediction, many of the F helix residues for F4 are significantly protected in the kinetic intermediate but are not protected in the F2 mutant. F4 folds via a kinetically trapped burst-phase intermediate that contains stabilized secondary structure in the A, B, F, G, and H helix regions. Rapid folding of the F helix stabilizes the central core of the misfolded intermediate and inhibits translocation of the H helix back to its native position, thereby decreasing the overall folding rate.     

Rational design, structural and thermodynamic characterization of a hyperstable variant of the villin headpiece helical subdomain

A hyperstable variant of the small independently folded helical subdomain (HP36) derived from the F-actin binding villin headpiece was designed by targeting surface electrostatic interactions and helical propensity. A double mutant N68A, K70M was significantly more stable than wild type. The Tm of wild type in aqueous buffer is 73.0 degrees C, whereas the double mutant did not display a complete unfolding transition. The double mutant could not be completely unfolded even by 10 M urea. In 3 M urea, the Tm of wild type is 54.8 degrees C while that of the N68AK70M double mutant is 73.9 degrees C. Amide H/2H exchange studies show that the pattern of exchange is very similar for wild type and the double mutant. The structures of a K70M single mutant and the double mutant were determined by X-ray crystallography and are identical to that of the wild type. Analytical ultracentrifugation demonstrates that the proteins are monomeric. The hyperstable mutant described here is expected to be useful for folding studies of HP36 because studies of the wild type domain have sometimes been limited by its marginal stability. The results provide direct evidence that naturally occurring miniature protein domains have not been evolutionarily optimized for global stability. The stabilizing effect of this double mutant could not be predicted by sequence analysis because K70 is conserved in the larger intact headpiece for functional reasons.     

NMR studies of Arc repressor mutants: proton assignments, secondary structure, and long-range contacts for the thermostable proline-8----leucine variant of Arc

Arc repressor is a 53-residue sequence-specific DNA binding protein. We report the assignment of the proton NMR spectrum and the secondary structure for the thermostable PL8 variant of Arc. This mutant, which differs from wild type by a Pro-8----Leu substitution, was chosen for study because its enhanced stability allows spectra to be acquired at elevated temperatures where spectral resolution is higher. The first five residues of the protein play important roles in DNA binding but appear to be disordered in solution. Residues 6-14 form the remaining part of the N-terminal DNA binding region of the protein and assume an antiparallel beta-conformation. This indicates that Arc is a member of a new class of DNA binding proteins. The observed interresidue nuclear Overhauser effects are consistent with a beta-strand, gamma-turn, beta-strand structure for the residue 6-14 region, although other structures are also consistent with the data. The remaining portion of the protein is predominantly alpha-helical. Residues 16-26 and 35-50 form amphipathic alpha-helices which may pack together in a four-helix bundle in the protein dimer.     

A site specific increase in recombination in Drosophila ananassae

The e65 pi; bri ru stock of Drosophila ananassae produced an extremely high rate of recombination in males when made heterozygous with any one of the wild type stocks. We analyzed and characterized the genetic factors which caused this phenomenon. We show that the second chromosome of the e65 pi; bri ru stock carries an enhancer of male recombination. The enhancer, En(2)-ep, is located between Om(2C) and Arc. The enhancement of meiotic recombination both in males and females was also observed at the specific region between Om(2C) and Arc on 2L. The magnitude of increased recombination was 30-40 fold in males and 13-30 fold in females. The relation between the hotspot of recombination in both sexes and the enhancer of male recombination is discussed.     

A single-point mutation in the extreme heat- and pressure-resistant sso7d protein from sulfolobus solfataricus leads to a major rearrangement of the hydrophobic core.

Sso7d is a basic 7-kDa DNA-binding protein from Sulfolobus solfataricus, also endowed with ribonuclease activity. The protein consists of a double-stranded antiparallel beta-sheet, onto which an orthogonal triple-stranded antiparallel beta-sheet is packed, and of a small helical stretch at the C-terminus. Furthermore, the two beta-sheets enclose an aromatic cluster displaying a fishbone geometry. We previously cloned the Sso7d-encoding gene, expressed it in Escherichia coli, and produced several single-point mutants, either of residues located in the hydrophobic core or of Trp23, which is exposed to the solvent and plays a major role in DNA binding. The mutation F31A was dramatically destabilizing, with a loss in thermo- and piezostabilities by at least 27 K and 10 kbar, respectively. Here, we report the solution structure of the F31A mutant, which was determined by NMR spectroscopy using 744 distance constraints obtained from analysis of multidimensional spectra in conjunction with simulated annealing protocols. The most remarkable finding is the change in orientation of the Trp23 side chain, which in the wild type is completely exposed to the solvent, whereas in the mutant is largely buried in the aromatic cluster. This prevents the formation of a cavity in the hydrophobic core of the mutant, which would arise in the absence of structural rearrangements. We found additional changes produced by the mutation, notably a strong distortion in the beta-sheets with loss in several hydrogen bonds, increased flexibility of some stretches of the backbone, and some local strains. On one hand, these features may justify the dramatic destabilization provoked by the mutation; on the other hand, they highlight the crucial role of the hydrophobic core in protein stability. To the best of our knowledge, no similar rearrangement has been so far described as a result of a single-point mutation.     

On the structure of the lipopolysaccharide core in the cell wall of Escherichia coli K12 W2252-11U− and its ter-mutant cells

From Escherichia coli K12 W2252-11U^? (wild type I and II) and its Ter-mutants, lipopolysaccharides were isolated and the primary structure of its core region was elucidated, the configuration of the glucose III (1→2)-linked to the glucose II residue in the core of parents (wild type I and II) changes into the configuration of the glucose (1→3)-linkage by the Ter-mutation. Also, the structure of the core in the Ter-15 mutant differs from that in the parent (wild type I) and is similar to that in Escherichia coli C used as an indicator for φ×174 phage. D-ribose residue in the core of the Ter-21 mutant links to the glucose I residue instead of the galactose residue in the core of the parent (wild type II).     

Direct analysis of backbone-backbone hydrogen bond formation in protein folding transition states

Here we investigate the role of backbone-backbone hydrogen bonding interactions in stabilizing the protein folding transition states of two model protein systems, the B1 domain of protein L (ProtL) and the P22 Arc repressor. A backbone modified analogue of ProtL containing an amide-to-ester bond substitution between residues 105 and 106 was prepared by total chemical synthesis, and the thermodynamic and kinetic parameters associated with its folding reaction were evaluated. Ultimately, these parameters were used in a Phi-value analysis to determine if the native backbone-backbone hydrogen bonding interaction perturbed in this analogue (i.e. a hydrogen bond in the first beta-turn of ProtL's beta-beta-alpha-beta-beta fold) was formed in the transition state of ProtL's folding reaction. Also determined were the kinetic parameters associated with the folding reactions of two Arc repressor analogues, each containing an amide-to-ester bond substitution in the backbone of their polypeptide chains. These parameters were used together with previously established thermodynamic parameters for the folding of these analogues in Phi-value analyses to determine if the native backbone-backbone hydrogen bonding interactions perturbed in these analogues (i.e. a hydrogen bond at the end of the intersubunit beta-sheet interface and hydrogen bonds at the beginning of the second alpha-helix in Arc repressor's beta-alpha-alpha structure) were formed in the transition state of Arc repressor's folding reaction. Our results reveal that backbone-backbone hydrogen bonding interactions are formed in the beta-turn and alpha-helical transition state structures of ProtL and Arc repressor, respectively; and they were not formed in the intersubunit beta-sheet interface of Arc repressor, a region of Arc repressor's polypeptide chain previously shown to have other non-native-like conformations in Arc's protein folding transition state.     

The high resolution crystal structure of recombinant Crithidia fasciculata tryparedoxin-I.

Tryparedoxin-I is a recently discovered thiol-disulfide oxidoreductase involved in the regulation of oxidative stress in parasitic trypanosomatids. The crystal structure of recombinant Crithidia fasciculata tryparedoxin-I in the oxidized state has been determined using multi-wavelength anomalous dispersion methods applied to a selenomethionyl derivative. The model comprises residues 3 to 145 with 236 water molecules and has been refined using all data between a 19- and 1.4-A resolution to an R-factor and R-free of 19.1 and 22.3%, respectively. Despite sharing only about 20% sequence identity, tryparedoxin-I presents a five-stranded twisted beta-sheet and two elements of helical structure in the same type of fold as displayed by thioredoxin, the archetypal thiol-disulfide oxidoreductase. However, the relationship of secondary structure with the linear amino acid sequences is different for each protein, producing a distinctive topology. The beta-sheet core is extended in the trypanosomatid protein with an N-terminal beta-hairpin. There are also differences in the content and orientation of helical elements of secondary structure positioned at the surface of the proteins, which leads to different shapes and charge distributions between human thioredoxin and tryparedoxin-I. A right-handed redox-active disulfide is formed between Cys-40 and Cys-43 at the N-terminal region of a distorted alpha-helix (alpha1). Cys-40 is solvent-accessible, and Cys-43 is positioned in a hydrophilic cavity. Three C-H...O hydrogen bonds donated from two proline residues serve to stabilize the disulfide-carrying helix and support the correct alignment of active site residues. The accurate model for tryparedoxin-I allows for comparisons with the family of thiol-disulfide oxidoreductases and provides a template for the discovery or design of selective inhibitors of hydroperoxide metabolism in trypanosomes. Such inhibitors are sought as potential therapies against a range of human pathogens.     

A functional decaisoleucine-containing signal sequence. Construction by cassette mutagenesis

An alkaline phosphatase signal sequence optimized for formation of a hydrophobic alpha-helix functions very efficiently in the transport process. This mutant contained a core region comprised of 9 consecutive leucine residues (Kendall, D. A., Bock, S. C., and Kaiser, E. T. (1986) Nature 321, 706-708). We have now constructed a second mutant containing a decaisoleucine core region. Isoleucine was chosen because it is an isomer of leucine with comparable hydrophobicity but in synthetic peptides isoleucine favors beta-sheet formation. Surprisingly, this mutant precursor was also processed efficiently, and mature alkaline phosphatase was correctly targeted to the Escherichia coli periplasm. Since the effective length of a beta-strand is extended relative to an alpha-helix, conformational differences should be mirrored by the relative effectiveness of shortened polyisoleucine and polyleucine core regions. However, analysis of two additional mutants containing truncated segments of either polyleucine or polyisoleucine did not reveal any differences and both accumulate as precursors. We conclude that these mutants do not adopt critically different structures. This comparative analysis was facilitated by construction of a new plasmid, CASS3. This plasmid contains unique restriction sites flanking the DNA region coding for the signal sequence hydrophobic core segment. Consequently, the wild type core-encoding region can be readily replaced with synthetic oligonucleotides coding for new structural units and multiple amino acid substitutions can be made without the need for step-wise mutagenesis.     

Random mutagenesis and selection of organic solvent‐stable haloperoxidase from Streptomyces aureofaciens

Haloperoxidases are useful oxygenases involved in halogenation of a range of water‐insoluble organic compounds and can be used without additional high‐cost cofactors. In particular, organic solvent‐stable haloperoxidases are desirable for enzymatic halogenations in the presence of organic solvents. In this study, we adopted a directed evolution approach by error‐prone polymerase chain reaction to improve the organic solvent‐stability of the homodimeric BPO‐A1 haloperoxidase from Streptomyces aureofaciens. Among 1,000 mutant BPO‐A1 haloperoxidases, an organic solvent‐stable mutant OST48 with P123L and P241A mutations and a high active mutant OST959 with H53Y and G162R mutations were selected. The residual activity of mutant OST48 after incubation in 40% (v/v) 1‐propanol for 1 h was 1.8‐fold higher than that of wild‐type BPO‐A1. In addition, the OST48 mutant showed higher stability in methanol, ethanol, dimethyl sulfoxide, and N,N‐dimethylformamide than wild‐type BPO‐A1 haloperoxidase. Moreover, after incubation at 80°C for 1 h, the residual activity of mutant OST959 was 4.6‐fold higher than that of wild‐type BPO‐A1. Based on the evaluation of single amino acid‐substituted mutant models, stabilization of the hydrophobic core derived from P123L mutation and increased numbers of hydrogen bonds derived from G162R mutation led to higher organic solvent‐stability and thermostability, respectively. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:917–924, 2015     

Genetics of ribosomal protein methylation in Escherichia coli. II. A mutant lacking a new type of methylated amino acid, N5-methylglutamine, in protein L3.

The ribosomes of an Escherichia coli mutant, designated prm-2, can be methylated in vitro by an enzymatic fraction from wild-type. This enzyme is inactive on the ribosomes from another mutant, prm-1, is reported previously to be methyl group-deficient in protein L11. In vitro methylation of prm-2 ribosomes resulted in the incorporation of about one methyl group per molecule of protein L3. After acid hydrolysis, all the methyl groups were found in a very basic compound which was identified as methylamine. This compound could have been generated by acid hydrolysis of N-methylated amide-groups from glutamine or asparagine. Therefore, chemically-synthesized N4-methyl-asparagine and N5-methylglutamine were chromatographed together with an enzymatic hydrolysate of methylated prm-2 proteins. In all the chromatogrphic systems studied the methylated amino acid was found in the same position as N5'-methylglutamine. These results indicate that mutant prm-2 lacks one residue of N5-methylglutamine present in ribosomal protein L3 of wild type E. coli.     

A stabilizing alpha/beta-hydrophobic core greatly contributes to hyperthermostability of archaeal [P62A]Ssh10b

The hyperthermophilic Ssh10b from Sulfolobus shibatae is a member of the Sac10b family, which has been postulated to play a role in chromosomal organization in Archaea. Ssh10b is capable of significantly constraining negative DNA supercoils at elevated temperatures. In this study, the solution structure of the dimeric P62A mutant Ssh10b ([P62A]Ssh10b) was determined by multidimensional NMR spectroscopy. The backbone 15N dynamics, H/D exchange with and without the denaturant GdmSCN, and chemical and thermal denaturation experiments were performed to investigate the molecular basis of high thermostability of [P62A]Ssh10b. Data analysis has revealed an alpha/beta-hydrophobic core consisting of two alpha-helices and one beta-sheet which are stabilized by cooperative hydrophobic and hydrogen-bonding interactions. This stabilizing alpha/beta-hydrophobic core of [P62A]Ssh10b exhibiting highly restricted internal motions is composed of residues having highly protected amide protons which exchange with solvent mostly by means of a global unfolding process. The K40N mutation greatly destabilizes the mutant [P62A]Ssh10b because this mutation disturbs the packing of alpha-helix against the beta-sheet reducing the stability of the alpha/beta-hydrophobic core in the mutant protein. In comparison with homologous mesophilic and thermophilic proteins, it can be presumed that the stabilizing alpha/beta-hydrophobic core in the [P62A]Ssh10b structure greatly contributes to the high thermostability of the protein.     

Enhanced red‐emitting railroad worm luciferase for bioassays and bioimaging

A luciferase from the railroad worm (Phrixothrix hirtus) is the only red‐emitting bioluminescent enzyme in nature that is advantageous in multicolor luciferase assays and in bioluminescence imaging (BLI). However, it is not used widely in scientific or industrial applications because of its low activity and stability. By using site‐directed mutagenesis, we produced red‐emitting mutants with higher activity and better stability. Compared with the wild‐type (WT), the luminescent activities from extracts of cultured mammalian cells expressing mutant luciferase were 9.8‐fold in I212L/N351K, 8.4‐fold in I212L, and 7.8‐fold in I212L/S463R; and the cell‐based activities were 3.6‐fold in I212L/N351K and 3.4‐fold in N351K. The remaining activities after incubation at 37°C for 10 min were 50.0% for I212L/S463R, 31.8% for I212L, and 23.0% for I212L/N351K, but only 5.2% for WT. To demonstrate an application of I212L/N351K, cell‐based BLI was performed, and the luminescence signal was 3.6‐fold higher than in WT. These results indicate that the mutants might improve the practicability of this signaling in bioassays and BLI.