Sequence distribution in microbial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) co-polyesters determined by NMR and MS

The microstructure of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolyesters (PHBV) as well as a mixture of two PHBV copolyesters of different comonomer composition and sequence distribution was studied by 13C NMR based on dyad and triad analysis and multistage electrospray ionization mass spectrometry (ESI-MSn). Both techniques gave results that were in good agreement for all investigated samples. The effect of microstructure on PHBV thermal properties was investigated from the melting behavior of samples. A PHBV copolyester with randomly distributed hydroxyvalerate units (12.0 mol % HV) showed a single melting peak, whereas samples with nonrandom composition distribution showed multiple melting peaks in their thermograms. Such complex melting behavior suggested that the 12.9 and 27.1 mol % PHBV copolyesters were actually blends of several copolymers with widely different comonomer-unit composition.     

Novel Biodegradable Polyester Poly(Propylene Succinate): Synthesis and Application in the Preparation of Solid Dispersions and Nanoparticles of a Water-Soluble Drug

Poly(propylene succinate) (PPSu) polymers of average molecular weights from 2,800 to 13,100 g/mol were synthesized and characterized with regard to crystallinity, thermal properties, and cytocompatibility. Higher molecular weight samples exhibited lower degree of crystallinity and melted at lower temperatures. Melting of the polymer appeared to begin at 38°C. PPSu cytocompatibility was investigated based on human umbilical vein endothelial cells viability in the presence of increasing concentrations of polymer, and it was found that PPSu exhibited comparable cytocompatibility with poly(dl-lactide). The feasibility of applying PPSu as a drug carrier was shown for the first time, as solid dispersions and nanoparticles of sodium fluvastatin based in PPSu were prepared. Drug release rates decreased with increasing the molecular weight of PPSu in both solid dispersions and nanoparticles. For dispersions prepared from PPSu of the same molecular weight, drug release rates increased with drug loading. It appears that PPSu applicability as a drug carrier warrants further consideration.     

Biosynthesis and properties of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) polymers

In support of programs to identify polyhydroxyalkanoates with improved materials properties, we report on our efforts to characterize the mechanical and thermal properties of copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyhexanoate (3HHx). The copolyesters, having molar fraction of 3HHx ranging from 2.5 to 35 mol % and average molecular weights ranging from 1.15 x 10(5) to 6.65 x 10(5), were produced by fermentation using Aeromonas hydrophila and a recombinant strain of Pseudomonas putida GPp104. The polymers were chloroform extracted and characterized by solution-state and solid-state nuclear magnetic resonance (NMR) spectroscopy and a variety of mechanical and thermal tests. Solution-state (1)H NMR data were used to determine polymer composition-of-matter, while solution-state (13)C NMR data provided polymer-sequence information. Solvent fractionation and NMR spectroscopic characterization of these polymers showed that polymers containing up to 9.5 mol % 3HHx had a Bernoullian compositional distribution. By contrast, polymers containing more than 9.5 mol % 3HHx had a bimodal polymer composition. Solvent fractionation of these 3HHx-rich polyesters produced two polymer fractions, each of which was again consistent with Bernoullian polymerization statistics. Solid-state NMR relaxation experiments provided insight into aging in poly(3HB-co-3HHx) copolymers, demonstrating increased polymer-chain motion with increasing 3HHx content. The elongation-to-break ratio in the polyesters increased with increasing molar fraction of 3HHx monomers. Aging properties of the poly(3HB-co-3HHx) copolymers were very similar to copolymers of 3HB and 3-hydroxyvalerate (3HV). However, poly(3HB-co-3HHx) exhibited increased activation energy to thermal degradation with increasing 3HHx content.     

Acid catalyzed transesterification as a route to poly(3-hydroxybutyrate-co-epsilon-caprolactone) copolymers from their homopolymers

Copolymers of (R)-3-hydroxybutyric acid (HB) and epsilon-caprolactone (CL) with a composition ranging from 28 to 81 mol % of HB were synthesized by transesterification of the corresponding homopolymers in solution in the presence of 4-toluenesulfonic acid. The copolyesters were characterized with regard to their molecular weights, thermal properties, molar compositions, and average block length of repeating units by gel permeation chromatography (GPC), differential scanning calorimetry, (1)H NMR, and (13)C NMR, respectively. Random and microblock copolymers could be obtained depending on experimental conditions, with weight-average molecular weights of up to 20,000. The glass transition temperature decreased from 2 to -42 degrees C as the CL content was increased from 0 to 72 mol %. The melting temperature (T(m)) of the PCL phase decreased from 70 to 46 degrees C as the HB content changed from 0 to 47 mol %, while the T(m) of the PHB phase decreased from 177 degrees C to 163 degrees C as the CL content changed from 0 to 72 mol %. Matrix-assisted laser desorption ionization time-of-flight mass spectra of GPC fractionated samples allowed us to ascertain that copolymers rich in HB units have mostly hydroxyl and carboxyl end groups, while copolymers rich in CL units have mostly tosyl and carboxyl end groups.     

Lipase-catalyzed copolymerization of omega-pentadecalactone with p-dioxanone and characterization of copolymer thermal and crystalline properties

Candida antarctica Lipase B (CALB), a metal-free enzyme, was successfully employed as catalyst for ring-opening copolymerization of omega-pentadecalactone (PDL) with p-dioxanone (DO) under mild reaction conditions (<80 degrees C, atmospheric pressure). Poly(PDL-co-DO) with high molecular weight (Mw > 30 000) and a wide range of comonomer contents was synthesized using various PDL/DO feed ratios. During the copolymerization reaction, large ring PDL was found to be more reactive than its smaller counterpart DO, resulting in higher PDL/DO unit ratios in polymer chains than the corresponding PDL/DO monomer ratios in the feed. The copolymers were typically isolated in 50-90 wt % yields as the monomer conversion was limited by the equilibrium between monomers and copolymer. 1H and 13C NMR analysis on poly(PDL-co-DO) formed by CALB showed that the copolymers contain nearly random sequences of PDL and DO units with a slight tendency toward alternating arrangements. Copolymerization with PDL was found to remarkably enhance PDO thermal stability. Differential scanning calorimetry (DSC) and wide-angle X-ray scattering (WAXS) results demonstrate high crystallinity in all copolymers over the whole range of compositions. Depending on copolymer composition, the crystal lattice of either PDO or PPDL hosts units of the other comonomer, a behavior typical of an isodimorphic system. In poly(PDL-co-DO), both melting temperature and melting enthalpy display a minimum at 70 mol % DO, that is, at the pseudoeutectic composition. WAXS diffractograms show one crystal phase (that of either PPDL or PDO) on either side of the pseudoeutectic and coexistence of PPDL and PDO crystals at the pseudoeutectic.     

Side-chain effect of second monomer units on crystalline morphology, thermal properties, and enzymatic degradability for random copolyesters of (R)-3-hydroxybutyric acid with (R)-3-hydroxyalkanoic acids

Three types of random copolymers with 94 mol % (R)-3-hydroxybutyric acid (3HB) and 6 mol % (R)-3-hydroxyalkanoic acids with different side-chain lengths, (R)-3-hydroxypentanoic acid (3HV), (R)-3-hydroxyhexanoic acid (3HHx), and medium-chain-length (R)-3-hydroxyalkanoic acids (mcl-3HA, C8-C12), were prepared by biological synthetic techniques. The solid-state structure and thermal properties of melt-crystallized films for copolymers were characterized by means of wide-angle X-ray diffraction, small-angle X-ray scattering, differential scanning calorimetry, and optical microscopy. The randomly distributed second monomer units, except for 3HV in copolyesters, act as defects of the P(3HB) crystal and are excluded from the P(3HB) crystalline lamellae. The lamellar thickness of copolymers decreased with an increase in the side-chain length of second monomer units. In addition, the growth rate of spherulites decreased with an increase in the carbon numbers of second monomer units at an identical crystallization temperature. These results indicate that a steric bulkiness of the second monomer unit affects the crystallization of (R)-3HB segments in random copolyesters. An enzymatic degradation test of melt-crystallized copolymer films was carried out in the presence of PHB depolymerase from Alcaligenes faecalis T1. Erosion rate of copolyesters was dependent on both the crystallinity and the lamellar thickness of samples. As the result, the rate of enzymatic degradation for copolymer films increased with an increase in the carbon numbers of second monomer units.     

Synthesis and characterization of branched polymers from lipase-catalyzed trimethylolpropane copolymerizations

Lipase-catalyzed terpolymerizations were performed with the monomers trimethylolpropane (B3), 1,8-octanediol (B2), and adipic acid (A2). Polymerizations were performed in bulk, at 70 degrees C, for 42 h, using immobilized lipase B from Candida antartica (Novozyme-435) as a catalyst. To determine the substitution pattern of trimethylolpropane (TMP) in copolymers, model compounds with variable degrees of acetylation were synthesized. Inverse-gated 13C NMR spectra were recorded to first determine the chemical shift positions for mono-, di-, and trisubstituted TMP units and, subsequently, to determine substitution of TMP units along chains. Variation of TMP in the monomer feed gave copolymers with degrees of branching (DB) from 20% to 67%. In one example, a hyperbranched copolyester with 53 mol % TMP adipate units was formed in 80% yield, with Mw 14 100 (relative to polystyrene standards), Mw/Mn 5.3, and DB 36%. Thermal and crystalline properties of the copolyesters were studied by thermogravimetric analysis and differential scanning calorimetry.     

Engineering of Ralstonia eutropha for production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from fructose and solid-state properties of the copolymer

Recombinant Ralstonia eutropha capable of producing poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) copolymer [P(3HB-co-3HHx)] from fructose was engineered by introduction of genes for crotonyl-CoA reductase (CCR) from Streptomyces cinnamonensis (ccrSc) and for PHA synthase and (R)-specific enoyl-CoA hydratase from Aeromonas caviae (phaC-JAc). In this recombinant strain, C6-acyl-CoA intermediates were provided via beta-ketothiolase-mediated elongation of butyryl-CoA, which was generated from crotonyl-CoA by the function of CCR. The recombinant strain could accumulate the copolyester up to 48 wt % of dry cell weight with 1.5 mol % of 3HHx fraction from fructose, when the expression of ccrSc under the control of the PBAD promoter was induced with 0.01% L-arabinose. The absence of L-arabinose or the deletion of ccrSc from the plasmid resulted in accumulation of poly(3-hydroxybutyrate) homopolymer, indicating the critical role of CCR in the formation of the 3-hydroxyhexanoate unit. Higher CCR activity obtained by the addition of a larger amount of L-arabinose did not affect the composition but reduced the intracellular content of the copolyester. The P(3HB-co-1.5 mol % 3HHx) copolyester produced from fructose by the recombinant R. eutropha showed relatively lower melting temperatures (150 degrees C and 161 degrees C) and lower crystallinity (48 +/- 5%) compared to those (175 degrees C and 60 +/- 5%) of P(3HB) homopolymer. It has been found that the incorporation of a small amount (1.5 mol %) of 3HHx units into P(3HB) sequences leads to a remarkable change in the solid-state properties of P(3HB) crystals. The present study demonstrates the potential of the engineered pathway for the production of copolyesters having favorable characteristics from inexpensive carbon resources.     

Pseudomonas oleovorans as a Source of Poly(beta-Hydroxyalkanoates) for Potential Applications as Biodegradable Polyesters

Pseudomonas oleovorans was grown in homogeneous media containing n-alkanoic acids, from formate to decanoate, as the sole carbon sources. Formation of intracellular poly(beta-hydroxyalkanoates) was observed only for hexanoate and the higher n-alkanoic acids. The maximum isolated polymer yields were approximately 30% of the cellular dry weight with growth on either octanoate or nonanoate. In most cases, the major repeating unit in the polymer had the same chain length as the n-alkanoic acid used for growth, but units with two carbon atoms less or more than the acid used as a carbon source were also generally present in the polyesters formed. Indeed, copolymers containing as many as six different types of beta-hydroxyalkanoate units were formed. The weight average molecular weights of the poly(beta-hydroxyalkanoate) copolymers produced by P. oleovorans ranged from 90,000 to 370,000. In spite of the higher cell yields obtained with octanoate and nonanoate, the use of hexanoate and heptanoate yielded higher-molecular-weight polymers. These copolyesters represent an entirely new class of biodegradable thermoplastics.     

Cocrystallization of random copolymers of omega-pentadecalactone and epsilon-caprolactone synthesized by lipase catalysis

Random copolymers were prepared by Candida antarctica lipase B (Novozyme-435) catalyzed copolymerization of omega-pentadecalactone (PDL) with epsilon-caprolactone (CL). Over the whole composition range PDL-CL copolymers are highly crystalline (melting enthalpy by differential scanning calorimetry, above 100 J/g; crystallinity degree by wide-angle X-ray scattering, WAXS, 60-70%). The copolymers melt at temperatures that linearly decrease with composition from that of poly(omega-pentadecalactone) (PPDL; 97 degrees C) to that of poly(epsilon-caprolactone) (PCL; 59 degrees C). The WAXS profiles of PCL and PPDL homopolymers are very similar, except for the presence in PPDL of the (001) reflection at 2theta = 4.58 degrees that corresponds to a 19.3 angstroms periodicity in the chain direction. In PDL-CL copolymers the intensity of this reflection decreases with increasing content of CL units and vanishes at 50 mol % CL, as a result of randomization of the ester group alignment and loss of chain periodicity. PDL-CL copolymers crystallize in a lattice that gradually changes from that of one homopolymer to that of the other, owing to comonomer isomorphous substitution. Cocrystallization of comonomer units is also shown by a random PDL-CL copolymer obtained in a polymerization/transesterification reaction catalyzed by C. antarctica lipase B (Novozyme-435) starting from preformed PCL and PDL monomer.     

Synthesis, characterization, and lectin recognition of hyperbranched polysaccharide obtained from 1,6-anhydro-D-hexofuranose

1,6-Anhydro-D-hexofuranoses, such as 1,6-anhydro-β-D-glucofuranose (1), 1,6-anhydro-β-D-mannofuranose (2), and 1,6-anhydro-α-D-galactofuranose (3), were polymerized using a thermally induced cationic catalyst in dry propylene carbonate to afford hyperbranched polysaccharides (poly1-3) with degrees of branching from 0.40 to 0.46. The weight-average molecular weights of poly1-3 measured by multiangle laser light scattering varied in the range from (1.02 to 5.84) × 10(4) g·mol(-1), which were significantly higher than those measured by size exclusion chromatography. The intrinsic viscosities ([η]) of poly1-3 were very low in the range from 4.9 to 7.4 mL·g(-1). The exponent (α) in the Mark-Houkwink-Sakurada equation ([η] = KM(α)) of the polymers was 0.20 to 0.33, which is <0.5. The steady shear flow of poly1-3 in an aqueous solution exhibited a Newtonian behavior with steady shear viscosities independent of the shear rate. These viscosity characteristics were attributed to the spherical structures of hyperbranched polysaccharides in an aqueous solution. Poly1-3 contained a high portion of terminal units of 31-43 mol % nonreducing D-hexopyranosyl and D-hexofuranosyl units, in which the D-hexofuranosyl units were 20-44 mol %. Moreover, poly1 and poly2 showed a strong interaction to Concanavalin A due to the cluster effect or multivalent effect of numerous nonreducing saccharide units on their surfaces with binding constants in the range from 1.7 × 10(4) to 2.7 × 10(5) M(-1).     

Cocrystallization model for synthetic biodegradable poly(butylene adipate-co-butylene terephthalate)

Synthetic biodegradable poly(butylene adipate-co-butylene terephthalate), P(BA-co-BT), with 56 mol % butylene adipate, BA, was characterized by solid-state NMR spectroscopy, thermal analysis, X-ray diffraction, computer modeling, and polarization microscopy. The NMR study showed the presence of BA and butylene terephthalate, BT. T(1C) NMR measurements proved that some BA and BT units were in crystalline regions. Thermal analysis showed one glass-transition temperature and a single diffuse melting endotherm corresponding to a large melting-point depression of about 100 degrees C compared with poly(butylene terephthalate), PBT. These results suggest that there is only one crystalline phase. An X-ray fiber diagram of a stretched film could be indexed with the same unit cell as that for PBT. Computer modeling showed that the adipate unit fits into the crystal structure of PBT by adopting a TTGTG dihedral angle sequence in the crystalline conformation proposed for the cocrystallization model. The predicted fiber diagram from the proposed model qualitatively agrees with the experimental one. Polarization microscopy revealed that the spherulite growth rate of P(BA-co-BT) was similar to that for poly(butylene adipate), PBA.     

Copolymers from unsaturated macrolactones: toward the design of cross-linked biodegradable polyesters

The enzymatic synthesis of a series of random copolyesters by ring-opening polymerization of unsaturated macrolactones like globalide and ambrettolide with 1,5-dioxepan-2-one (DXO) and 4-methyl caprolactone (4MeCL) was investigated. (13)C NMR diad analysis confirmed the randomness of all copolymers irrespective of the comonomer ratios. Thermal investigation showed that incorporating the comonomers lowered the melting points of the polymers as compared with the macrolactone homopolymers. The decrease was dependent on the comonomer ratio. The unsaturated copolymers were thermally cross-linked using dicumyl peroxide, which resulted in completely amorphous insoluble networks. It was found that 10% incorporation of the unsaturated macolactone was sufficient to obtain a gel content of 95 wt %. Preliminary degradation tests confirm that the cross-linked copolymers are enzymatically degradable and that the incorporation of hydrophilic comonomers like DXO enhances degradation.     

High Molecular Weight Poly(butylene succinate-co-butylene furandicarboxylate) Copolyesters: From Catalyzed Polycondensation Reaction to Thermomechanical Properties

Novel potentially biobased aliphatic-aromatic copolyesters poly(butylene succinate-co-butylene furandicarboxylate) (PBSFs) in full composition range were successfully synthesized from 2,5-furandicarboxylic acid (FA), succinic acid (SA), and 1,4-butanediol (BDO) via an esterification and polycondensation process using tetrabutyl titanate (TBT) or TBT/La(acac)(3) as catalyst. The copolyesters were characterized by size exclusion chromatography (SEC), Fourier transform infrared (FTIR), (1)H NMR, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), and their tensile properties were also evaluated. The weight average molecular weight (M(w)) ranges from 39?000 to 89?000 g/mol. The copolyesters are random copolymers whose composition is well controlled by the feed ratio of the diacid monomers. PBSFs have excellent thermal stability. The glass transition temperature (T(g)) increases continuously with ?(BF) and agrees well with the Fox equation. The crystallizability and T(m) decrease with increasing butylene furandicarboxylate (BF) unit content (?(BF)) from 0 to 40 mol %, but rise again at ?(BF) of 50-100 mol %. Consequently, the tensile modulus and strength decrease, and the elongation at break increases with ?(BF) in the range of 0-40 mol %. At higher ?(BF), the modulus and strength increase and the ultimate elongation decreases. Thus, depending on ?(BF), the structure and properties of PBSFs can be tuned ranging from crystalline polymers possessing good tensile modulus (360-1800 MPa) and strength (20-35 MPa) to nearly amorphous polymer of low T(g) and high elongation (～600%), and therefore they may find applications in thermoplastics as well as elastomers or impact modifiers.     

Production of poly(3-hydroxyalkanoates-co-3-hydroxy-ω-fluoroalkanoates) byPseudomonas oleovorans from 1-fluorononane and gluconate

Summary Pseudomonas oleovorans grew well and synthesized copolyesters of 3-hydroxyalkanoates and 3-hydroxy--fluoroalkanoates in the mineral medium containing 1-fluorononane and sodium gluconate. The content of fluorinated units in copolyesters could be controlled from 0 to 40 mol%. The copolyesters were shown to have a random sequence distribution of different monomeric units by analysis of the¹³C NMR spectra. The melting temperatures of copolyesters were 52–58°C, and the enthalpy of fusion decreased with the content of fluorinated units.     

Resilient bioresorbable copolymers based on trimethylene carbonate, L-lactide, and 1,5-dioxepan-2-one

The new combinations of monomers presented in this work were evaluated in order to create an elastic material for potential application in soft tissue engineering. Thermoplastic elastomers (TPE) of trimethylene carbonate (TMC) with L-lactide (LLA) and 1,5-dioxepan-2-one (DXO) have been synthesized using a cyclic five-membered tin alkoxide initiator. The block copolymers were designed in such a way that poly(trimethylene carbonate-co-1,5-dioxepan-2-one) formed an amorphous middle block and the poly(L-lactide) (PLLA) formed semicrystalline terminal blocks. The amorphous middle block consisted of relatively randomly distributed TMC and DXO monomer units, and the defined block structure of the PLLA terminal segments was confirmed by 13C NMR. The properties of the TMC-DXO-LLA copolymers were compared with those of triblock copolymers based either on LLA-TMC or on LLA-DXO. Differential scanning calorimetry and dynamic mechanical analysis data confirmed the micro-phase separation in the copolymers. The mechanical properties of the copolymers were evaluated using tensile testing and cycling loading. All of the copolymers synthesized showed a highly elastic behavior. The properties of copolymers could be tailored by altering the proportions of the different monomers.     

Small-angle X-ray scattering study of the interaction of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymers with lipid bilayers

The relationship between molecular architecture and the nature of interactions with lipid bilayers has been studied for a series of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers using small-angle X-ray scattering (SAXS) and thermal analysis (differential scanning calorimetry, DSC). The number of molecular repeat units in the hydrophobic poly(propylene oxide), PPO, block has been found to be a critical determinant of the nature of triblock copolymer-lipid bilayer association. For dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-based biomembrane structures, polymers possessing a PPO chain length commensurate with the acyl chain dimensions of the lipid bilayer yield highly ordered, swollen lamellar structures consistent with well-integrated (into the lipid bilayer) PPO blocks. Triblock copolymers of lesser PPO chain length yield materials with structural characteristics similar to a simple dispersion of DMPC in water. Increasing the concentration (from 4 to 12 mol %) of well-integrated triblock copolymers enhances the structural ordering of the lamellar phase, while concentrations exceeding 16 mol % result in the formation of a hexagonal phase. Examination of temperature-induced changes in the structure of these mesophases (complex fluids) reveals that if the temperature is reduced sufficiently, all compositions exclude polymer and thus exhibit the characteristic SAXS pattern for hydrated DMPC bilayers. Increasing the temperature promotes better insertion of the polymers possessing PPO chain lengths sufficient for membrane insertion. No temperature-induced structural changes are observed in compositions prepared with PEO-PPO-PEO polymers that feature PPO length insufficient to permit full incorporation into the lipid bilayer.     

Nanoaggregates of biodegradable amphiphilic random polycations for delivering water-insoluble drugs

Cationic amphiphilic random copolyesters were obtained by copolymerization of 5-Z-amino-δ-valerolactone and ε-caprolactone. The amino content of the final copolymers was controlled by the polymerization feed ratio and was in the range 10 to 100%. Copolymers solubility and aggregation behavior was assessed by conductometric and zeta potential analyses. A critical aggregation concentration of ca. 0.05% (w/v) was found for all water-soluble copolymers that formed nanoaggregates. Two populations were found to be present in equilibrium with hydrodynamic diameters in the range of 30-50 and 100-250 nm. The capacity to use the amphiphilic and cationic character of the nanoaggregates to encapsulate highly hydrophobic compounds was further investigated. Finally, copolymers hemo- and cytocompatibility were evaluated by hemagglutination, hemolysis, and cells proliferation tests. The results showed that the proposed cationic amphiphilic random copolyesters are biocompatible.     

Biosynthesis and properties of medium-chain-length polyhydroxyalkanoates with enriched content of the dominant monomer

When grown in a nonanoic acid-limited chemostat at a dilution rate of 0.25 h(-1), Pseudomonas putida KT2440 produced poly(3-hydroxynonanoate-co-3-hydroxyheptanoate) containing 68 mol % 3-hydroxynonanoate (C9) and 32 mol % 3-hydroxyheptanoate (C7). Under the same conditions, but in the presence of acrylic acid, a fatty acid β-oxidation inhibitor, the C9 monomer content increased to 88 mol %. Cofeeding glucose (3.9 g L(-1)) and nonanoic acid (2.9 ± 0.1 g L(-1)) in continuous culture with 0.2 g L(-1) of acrylic acid in the feed, further increased the C9 content to 95 mol %. A yield of PHA from nonanoic acid of 0.93 mol mol(-1) was attained. PHA with a 3-hydroxyoctanoate (C8) content of 98 mol % was produced with the same cofeeding methodology from octanoic acid. As the dominant monomer content increased, the melting point of the poly(3-hydroxynonanoate) copolymers increased from 46 to 63 °C and that of the poly(3-hydroxyoctanoate) copolymers from 54 to 62 °C. All copolymer compositions resulted in elongation to break values of about 1300%, but tensile strength at break and Young's modulus both increased with increasing amounts of the dominant monomer.     

Synthesis and characterization of poly(butylene succinate-co-butylene malate): a new biodegradable copolyester bearing hydroxyl pendant groups

A new biodegradable copolyester, poly(butylene succinate-co-butylene malate) P(BS-co-BM), has been preliminarily prepared with optically active centers and lateral hydroxyl functional groups via a four-step synthetic strategy. First, an optically active benzyl-protected dimethyl malate was synthesized from a starting material of (S)-dimethyl malate and purified with good yield. Then, copolyester poly(butylene succinate-co-benzyl-protected butylene malate), P(BS-co-BBM), was prepared through a skilled condensation copolymerization of the benzyl-protected dimethyl malate, dimethyl succinate, and 1,4-butanediol in the presence of titanium tetraisopropoxide as the catalyst. Finally, a Pd/C catalyzed hydrogenation was applied to eliminate the benzyl protection group in a mixed solution of THF and methanol; thus the target copolyester P(BS-co-BM) was attained. On the other hand, physical properties of the synthesized copolyesters were systematically characterized by means of nuclear magnetic resonance spectrometer, Fourier transformed infrared spectrometer, gel permeation chromatography, optical polarimeter, quantitative hydroxyl titration, and thermal analytical instruments. The experimental evidence demonstrated a successful construction of the product P(BS-co-BM) bearing lateral hydroxyl functional groups. It was also revealed that the lower BBM unit content was in the benzyl-protected optically active P(BS-co-BBM) copolyester, the higher melting point T(m), crystallinity, the broader molecular distribution, and the lower glass transition temperature T(g) would be detected, and these results can be accounted for the presence of bulky lateral benzyl moieties. In contrast, the deprotected product P(BS-co-55 mol % BM) showed a higher T(m), crystallinity and lower T(g) than its counterpart P(BS-co-55 mol % BBM). Interestingly, a thermal stability as high as that of the linear PBS was observed for P(BS-co-55 mol % BM) while a strong BBM unit content dependence of thermal stability was detected for the benzyl-protected copolyester P(BS-co-BBM)s. Therefore, these results may be beneficial for the new optically active P(BS-co-BM) bearing hydrophilic hydroxyl functional groups as a potential biomaterial.